| blob | 402dc0c0ebc04d814b69f55636ae1320bf24b747 |
1 |
2 | x_store.sa 3.2 1/24/91
3 |
4 | store --- store operand to memory or register
5 |
6 | Used by underflow and overflow handlers.
7 |
8 | a6 = points to fp value to be stored.
9 |
11 | Copyright (C) Motorola, Inc. 1990
12 | All Rights Reserved
13 |
14 | For details on the license for this file, please see the
15 | file, README, in this same directory.
17 X_STORE: |idnt 2,1 | Motorola 040 Floating Point Software Package
19 |section 8
21 fpreg_mask:
22 .byte 0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01
24 #include "fpsp.h"
26 |xref mem_write
27 |xref get_fline
28 |xref g_opcls
29 |xref g_dfmtou
30 |xref reg_dest
32 .global dest_ext
33 .global dest_dbl
34 .global dest_sgl
36 .global store
37 store:
38 btstb #E3,E_BYTE(%a6)
39 beqs E1_sto
40 E3_sto:
41 movel CMDREG3B(%a6),%d0
42 bfextu %d0{#6:#3},%d0 |isolate dest. reg from cmdreg3b
43 sto_fp:
44 lea fpreg_mask,%a1
45 moveb (%a1,%d0.w),%d0 |convert reg# to dynamic register mask
46 tstb LOCAL_SGN(%a0)
47 beqs is_pos
48 bsetb #sign_bit,LOCAL_EX(%a0)
49 is_pos:
50 fmovemx (%a0),%d0 |move to correct register
51 |
52 | if fp0-fp3 is being modified, we must put a copy
53 | in the USER_FPn variable on the stack because all exception
54 | handlers restore fp0-fp3 from there.
55 |
56 cmpb #0x80,%d0
57 bnes not_fp0
58 fmovemx %fp0-%fp0,USER_FP0(%a6)
59 rts
60 not_fp0:
61 cmpb #0x40,%d0
62 bnes not_fp1
63 fmovemx %fp1-%fp1,USER_FP1(%a6)
64 rts
65 not_fp1:
66 cmpb #0x20,%d0
67 bnes not_fp2
68 fmovemx %fp2-%fp2,USER_FP2(%a6)
69 rts
70 not_fp2:
71 cmpb #0x10,%d0
72 bnes not_fp3
73 fmovemx %fp3-%fp3,USER_FP3(%a6)
74 rts
75 not_fp3:
76 rts
78 E1_sto:
79 bsrl g_opcls |returns opclass in d0
80 cmpib #3,%d0
81 beq opc011 |branch if opclass 3
82 movel CMDREG1B(%a6),%d0
83 bfextu %d0{#6:#3},%d0 |extract destination register
84 bras sto_fp
86 opc011:
87 bsrl g_dfmtou |returns dest format in d0
88 | ;ext=00, sgl=01, dbl=10
89 movel %a0,%a1 |save source addr in a1
90 movel EXC_EA(%a6),%a0 |get the address
91 cmpil #0,%d0 |if dest format is extended
92 beq dest_ext |then branch
93 cmpil #1,%d0 |if dest format is single
94 beq dest_sgl |then branch
95 |
96 | fall through to dest_dbl
97 |
99 |
100 | dest_dbl --- write double precision value to user space
101 |
102 |Input
103 | a0 -> destination address
104 | a1 -> source in extended precision
105 |Output
106 | a0 -> destroyed
107 | a1 -> destroyed
108 | d0 -> 0
109 |
110 |Changes extended precision to double precision.
111 | Note: no attempt is made to round the extended value to double.
112 | dbl_sign = ext_sign
113 | dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias)
114 | get rid of ext integer bit
115 | dbl_mant = ext_mant{62:12}
116 |
117 | --------------- --------------- ---------------
118 | extended -> |s| exp | |1| ms mant | | ls mant |
119 | --------------- --------------- ---------------
120 | 95 64 63 62 32 31 11 0
121 | | |
122 | | |
123 | | |
124 | v v
125 | --------------- ---------------
126 | double -> |s|exp| mant | | mant |
127 | --------------- ---------------
128 | 63 51 32 31 0
129 |
130 dest_dbl:
131 clrl %d0 |clear d0
132 movew LOCAL_EX(%a1),%d0 |get exponent
133 subw #0x3fff,%d0 |subtract extended precision bias
134 cmpw #0x4000,%d0 |check if inf
135 beqs inf |if so, special case
136 addw #0x3ff,%d0 |add double precision bias
137 swap %d0 |d0 now in upper word
138 lsll #4,%d0 |d0 now in proper place for dbl prec exp
139 tstb LOCAL_SGN(%a1)
140 beqs get_mant |if positive, go process mantissa
141 bsetl #31,%d0 |if negative, put in sign information
142 | ; before continuing
143 bras get_mant |go process mantissa
144 inf:
145 movel #0x7ff00000,%d0 |load dbl inf exponent
146 clrl LOCAL_HI(%a1) |clear msb
147 tstb LOCAL_SGN(%a1)
148 beqs dbl_inf |if positive, go ahead and write it
149 bsetl #31,%d0 |if negative put in sign information
150 dbl_inf:
151 movel %d0,LOCAL_EX(%a1) |put the new exp back on the stack
152 bras dbl_wrt
153 get_mant:
154 movel LOCAL_HI(%a1),%d1 |get ms mantissa
155 bfextu %d1{#1:#20},%d1 |get upper 20 bits of ms
156 orl %d1,%d0 |put these bits in ms word of double
157 movel %d0,LOCAL_EX(%a1) |put the new exp back on the stack
158 movel LOCAL_HI(%a1),%d1 |get ms mantissa
159 movel #21,%d0 |load shift count
160 lsll %d0,%d1 |put lower 11 bits in upper bits
161 movel %d1,LOCAL_HI(%a1) |build lower lword in memory
162 movel LOCAL_LO(%a1),%d1 |get ls mantissa
163 bfextu %d1{#0:#21},%d0 |get ls 21 bits of double
164 orl %d0,LOCAL_HI(%a1) |put them in double result
165 dbl_wrt:
166 movel #0x8,%d0 |byte count for double precision number
167 exg %a0,%a1 |a0=supervisor source, a1=user dest
168 bsrl mem_write |move the number to the user's memory
169 rts
170 |
171 | dest_sgl --- write single precision value to user space
172 |
173 |Input
174 | a0 -> destination address
175 | a1 -> source in extended precision
176 |
177 |Output
178 | a0 -> destroyed
179 | a1 -> destroyed
180 | d0 -> 0
181 |
182 |Changes extended precision to single precision.
183 | sgl_sign = ext_sign
184 | sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias)
185 | get rid of ext integer bit
186 | sgl_mant = ext_mant{62:12}
187 |
188 | --------------- --------------- ---------------
189 | extended -> |s| exp | |1| ms mant | | ls mant |
190 | --------------- --------------- ---------------
191 | 95 64 63 62 40 32 31 12 0
192 | | |
193 | | |
194 | | |
195 | v v
196 | ---------------
197 | single -> |s|exp| mant |
198 | ---------------
199 | 31 22 0
200 |
201 dest_sgl:
202 clrl %d0
203 movew LOCAL_EX(%a1),%d0 |get exponent
204 subw #0x3fff,%d0 |subtract extended precision bias
205 cmpw #0x4000,%d0 |check if inf
206 beqs sinf |if so, special case
207 addw #0x7f,%d0 |add single precision bias
208 swap %d0 |put exp in upper word of d0
209 lsll #7,%d0 |shift it into single exp bits
210 tstb LOCAL_SGN(%a1)
211 beqs get_sman |if positive, continue
212 bsetl #31,%d0 |if negative, put in sign first
213 bras get_sman |get mantissa
214 sinf:
215 movel #0x7f800000,%d0 |load single inf exp to d0
216 tstb LOCAL_SGN(%a1)
217 beqs sgl_wrt |if positive, continue
218 bsetl #31,%d0 |if negative, put in sign info
219 bras sgl_wrt
221 get_sman:
222 movel LOCAL_HI(%a1),%d1 |get ms mantissa
223 bfextu %d1{#1:#23},%d1 |get upper 23 bits of ms
224 orl %d1,%d0 |put these bits in ms word of single
226 sgl_wrt:
227 movel %d0,L_SCR1(%a6) |put the new exp back on the stack
228 movel #0x4,%d0 |byte count for single precision number
229 tstl %a0 |users destination address
230 beqs sgl_Dn |destination is a data register
231 exg %a0,%a1 |a0=supervisor source, a1=user dest
232 leal L_SCR1(%a6),%a0 |point a0 to data
233 bsrl mem_write |move the number to the user's memory
234 rts
235 sgl_Dn:
236 bsrl get_fline |returns fline word in d0
237 andw #0x7,%d0 |isolate register number
238 movel %d0,%d1 |d1 has size:reg formatted for reg_dest
239 orl #0x10,%d1 |reg_dest wants size added to reg#
240 bral reg_dest |size is X, rts in reg_dest will
241 | ;return to caller of dest_sgl
243 dest_ext:
244 tstb LOCAL_SGN(%a1) |put back sign into exponent word
245 beqs dstx_cont
246 bsetb #sign_bit,LOCAL_EX(%a1)
247 dstx_cont:
248 clrb LOCAL_SGN(%a1) |clear out the sign byte
250 movel #0x0c,%d0 |byte count for extended number
251 exg %a0,%a1 |a0=supervisor source, a1=user dest
252 bsrl mem_write |move the number to the user's memory
253 rts
255 |end