| blob | e576ee85c42f1fe6da0db81de11555fc220fc6fa |
1 /*
2 * Device Tree Source for PIKA Warp
3 *
4 * Copyright (c) 2008-2009 PIKA Technologies
5 * Sean MacLennan <smaclennan@pikatech.com>
6 *
7 * This file is licensed under the terms of the GNU General Public
8 * License version 2. This program is licensed "as is" without
9 * any warranty of any kind, whether express or implied.
10 */
12 /dts-v1/;
14 / {
15 #address-cells = <2>;
16 #size-cells = <1>;
17 model = "pika,warp";
18 compatible = "pika,warp";
19 dcr-parent = <&{/cpus/cpu@0}>;
21 aliases {
22 ethernet0 = &EMAC0;
23 serial0 = &UART0;
24 };
26 cpus {
27 #address-cells = <1>;
28 #size-cells = <0>;
30 cpu@0 {
31 device_type = "cpu";
32 model = "PowerPC,440EP";
33 reg = <0x00000000>;
34 clock-frequency = <0>; /* Filled in by zImage */
35 timebase-frequency = <0>; /* Filled in by zImage */
36 i-cache-line-size = <32>;
37 d-cache-line-size = <32>;
38 i-cache-size = <32768>;
39 d-cache-size = <32768>;
40 dcr-controller;
41 dcr-access-method = "native";
42 };
43 };
45 memory {
46 device_type = "memory";
47 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
48 };
50 UIC0: interrupt-controller0 {
51 compatible = "ibm,uic-440ep","ibm,uic";
52 interrupt-controller;
53 cell-index = <0>;
54 dcr-reg = <0x0c0 0x009>;
55 #address-cells = <0>;
56 #size-cells = <0>;
57 #interrupt-cells = <2>;
58 };
60 UIC1: interrupt-controller1 {
61 compatible = "ibm,uic-440ep","ibm,uic";
62 interrupt-controller;
63 cell-index = <1>;
64 dcr-reg = <0x0d0 0x009>;
65 #address-cells = <0>;
66 #size-cells = <0>;
67 #interrupt-cells = <2>;
68 interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
69 interrupt-parent = <&UIC0>;
70 };
72 SDR0: sdr {
73 compatible = "ibm,sdr-440ep";
74 dcr-reg = <0x00e 0x002>;
75 };
77 CPR0: cpr {
78 compatible = "ibm,cpr-440ep";
79 dcr-reg = <0x00c 0x002>;
80 };
82 plb {
83 compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
84 #address-cells = <2>;
85 #size-cells = <1>;
86 ranges;
87 clock-frequency = <0>; /* Filled in by zImage */
89 SDRAM0: sdram {
90 compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
91 dcr-reg = <0x010 0x002>;
92 };
94 DMA0: dma {
95 compatible = "ibm,dma-440ep", "ibm,dma-440gp";
96 dcr-reg = <0x100 0x027>;
97 };
99 MAL0: mcmal {
100 compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
101 dcr-reg = <0x180 0x062>;
102 num-tx-chans = <4>;
103 num-rx-chans = <2>;
104 interrupt-parent = <&MAL0>;
105 interrupts = <0x0 0x1 0x2 0x3 0x4>;
106 #interrupt-cells = <1>;
107 #address-cells = <0>;
108 #size-cells = <0>;
109 interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
110 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
111 /*SERR*/ 0x2 &UIC1 0x0 0x4
112 /*TXDE*/ 0x3 &UIC1 0x1 0x4
113 /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
114 };
116 POB0: opb {
117 compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
118 #address-cells = <1>;
119 #size-cells = <1>;
120 ranges = <0x00000000 0x00000000 0x00000000 0x80000000
121 0x80000000 0x00000000 0x80000000 0x80000000>;
122 interrupt-parent = <&UIC1>;
123 interrupts = <0x7 0x4>;
124 clock-frequency = <0>; /* Filled in by zImage */
126 EBC0: ebc {
127 compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
128 dcr-reg = <0x012 0x002>;
129 #address-cells = <2>;
130 #size-cells = <1>;
131 clock-frequency = <0>; /* Filled in by zImage */
132 interrupts = <0x5 0x1>;
133 interrupt-parent = <&UIC1>;
135 fpga@2,0 {
136 compatible = "pika,fpga";
137 reg = <0x00000002 0x00000000 0x00001000>;
138 interrupts = <0x18 0x8>;
139 interrupt-parent = <&UIC0>;
140 };
142 fpga@2,2000 {
143 compatible = "pika,fpga-sgl";
144 reg = <0x00000002 0x00002000 0x00000200>;
145 };
147 fpga@2,4000 {
148 compatible = "pika,fpga-sd";
149 reg = <0x00000002 0x00004000 0x00004000>;
150 };
152 nor@0,0 {
153 compatible = "amd,s29gl032a", "cfi-flash";
154 bank-width = <2>;
155 reg = <0x00000000 0x00000000 0x00400000>;
156 #address-cells = <1>;
157 #size-cells = <1>;
159 partition@0 {
160 label = "splash";
161 reg = <0x00000000 0x00010000>;
162 };
163 partition@300000 {
164 label = "fpga";
165 reg = <0x0300000 0x00040000>;
166 };
167 partition@340000 {
168 label = "env";
169 reg = <0x0340000 0x00040000>;
170 };
171 partition@380000 {
172 label = "u-boot";
173 reg = <0x0380000 0x00080000>;
174 };
175 };
177 ndfc@1,0 {
178 compatible = "ibm,ndfc";
179 reg = <0x00000001 0x00000000 0x00002000>;
180 ccr = <0x00001000>;
181 bank-settings = <0x80002222>;
182 #address-cells = <1>;
183 #size-cells = <1>;
185 nand {
186 #address-cells = <1>;
187 #size-cells = <1>;
189 partition@0 {
190 label = "kernel";
191 reg = <0x00000000 0x00200000>;
192 };
193 partition@200000 {
194 label = "root";
195 reg = <0x00200000 0x03E00000>;
196 };
197 partition@40000000 {
198 label = "persistent";
199 reg = <0x04000000 0x04000000>;
200 };
201 partition@80000000 {
202 label = "persistent1";
203 reg = <0x08000000 0x04000000>;
204 };
205 partition@C0000000 {
206 label = "persistent2";
207 reg = <0x0C000000 0x04000000>;
208 };
209 };
210 };
211 };
213 UART0: serial@ef600300 {
214 device_type = "serial";
215 compatible = "ns16550";
216 reg = <0xef600300 0x00000008>;
217 virtual-reg = <0xef600300>;
218 clock-frequency = <0>; /* Filled in by zImage */
219 current-speed = <115200>;
220 interrupt-parent = <&UIC0>;
221 interrupts = <0x0 0x4>;
222 };
224 IIC0: i2c@ef600700 {
225 compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
226 reg = <0xef600700 0x00000014>;
227 interrupt-parent = <&UIC0>;
228 interrupts = <0x2 0x4>;
229 #address-cells = <1>;
230 #size-cells = <0>;
232 ad7414@4a {
233 compatible = "adi,ad7414";
234 reg = <0x4a>;
235 interrupts = <0x19 0x8>;
236 interrupt-parent = <&UIC0>;
237 };
239 /* This will create 52 and 53 */
240 at24@52 {
241 compatible = "at,24c04";
242 reg = <0x52>;
243 };
244 };
246 GPIO0: gpio@ef600b00 {
247 compatible = "ibm,ppc4xx-gpio";
248 reg = <0xef600b00 0x00000048>;
249 #gpio-cells = <2>;
250 gpio-controller;
251 };
253 GPIO1: gpio@ef600c00 {
254 compatible = "ibm,ppc4xx-gpio";
255 reg = <0xef600c00 0x00000048>;
256 #gpio-cells = <2>;
257 gpio-controller;
258 };
260 power-leds {
261 compatible = "gpio-leds";
262 green {
263 gpios = <&GPIO1 0 0>;
264 default-state = "keep";
265 };
266 red {
267 gpios = <&GPIO1 1 0>;
268 default-state = "keep";
269 };
270 };
272 ZMII0: emac-zmii@ef600d00 {
273 compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
274 reg = <0xef600d00 0x0000000c>;
275 };
277 EMAC0: ethernet@ef600e00 {
278 device_type = "network";
279 compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
280 interrupt-parent = <&UIC1>;
281 interrupts = <0x1c 0x4 0x1d 0x4>;
282 reg = <0xef600e00 0x00000070>;
283 local-mac-address = [000000000000];
284 mal-device = <&MAL0>;
285 mal-tx-channel = <0 1>;
286 mal-rx-channel = <0>;
287 cell-index = <0>;
288 max-frame-size = <1500>;
289 rx-fifo-size = <4096>;
290 tx-fifo-size = <2048>;
291 phy-mode = "rmii";
292 phy-map = <0x00000000>;
293 zmii-device = <&ZMII0>;
294 zmii-channel = <0>;
295 };
297 usb@ef601000 {
298 compatible = "ohci-be";
299 reg = <0xef601000 0x00000080>;
300 interrupts = <0x8 0x1 0x9 0x1>;
301 interrupt-parent = < &UIC1 >;
302 };
303 };
304 };
306 chosen {
307 linux,stdout-path = "/plb/opb/serial@ef600300";
308 };
309 };