OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4
[zen-stable.git] / drivers / isdn / hisax / sedlbauer.c
blob69dfc8d29017f62dde23c9fbd7123b17410bcbec
1 /* $Id: sedlbauer.c,v 1.34.2.6 2004/01/24 20:47:24 keil Exp $
3 * low level stuff for Sedlbauer cards
4 * includes support for the Sedlbauer speed star (speed star II),
5 * support for the Sedlbauer speed fax+,
6 * support for the Sedlbauer ISDN-Controller PC/104 and
7 * support for the Sedlbauer speed pci
8 * derived from the original file asuscom.c from Karsten Keil
10 * Author Marcus Niemann
11 * Copyright by Marcus Niemann <niemann@www-bib.fh-bielefeld.de>
13 * This software may be used and distributed according to the terms
14 * of the GNU General Public License, incorporated herein by reference.
16 * Thanks to Karsten Keil
17 * Sedlbauer AG for informations
18 * Edgar Toernig
22 /* Supported cards:
23 * Card: Chip: Configuration: Comment:
24 * ---------------------------------------------------------------------
25 * Speed Card ISAC_HSCX DIP-SWITCH
26 * Speed Win ISAC_HSCX ISAPNP
27 * Speed Fax+ ISAC_ISAR ISAPNP Full analog support
28 * Speed Star ISAC_HSCX CARDMGR
29 * Speed Win2 IPAC ISAPNP
30 * ISDN PC/104 IPAC DIP-SWITCH
31 * Speed Star2 IPAC CARDMGR
32 * Speed PCI IPAC PCI PNP
33 * Speed Fax+ ISAC_ISAR PCI PNP Full analog support
35 * Important:
36 * For the sedlbauer speed fax+ to work properly you have to download
37 * the firmware onto the card.
38 * For example: hisaxctrl <DriverID> 9 ISAR.BIN
41 #include <linux/init.h>
42 #include "hisax.h"
43 #include "isac.h"
44 #include "ipac.h"
45 #include "hscx.h"
46 #include "isar.h"
47 #include "isdnl1.h"
48 #include <linux/pci.h>
49 #include <linux/isapnp.h>
51 static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
53 static const char *Sedlbauer_Types[] =
54 {"None", "speed card/win", "speed star", "speed fax+",
55 "speed win II / ISDN PC/104", "speed star II", "speed pci",
56 "speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
58 #define PCI_SUBVENDOR_SPEEDFAX_PYRAMID 0x51
59 #define PCI_SUBVENDOR_HST_SAPHIR3 0x52
60 #define PCI_SUBVENDOR_SEDLBAUER_PCI 0x53
61 #define PCI_SUBVENDOR_SPEEDFAX_PCI 0x54
62 #define PCI_SUB_ID_SEDLBAUER 0x01
64 #define SEDL_SPEED_CARD_WIN 1
65 #define SEDL_SPEED_STAR 2
66 #define SEDL_SPEED_FAX 3
67 #define SEDL_SPEED_WIN2_PC104 4
68 #define SEDL_SPEED_STAR2 5
69 #define SEDL_SPEED_PCI 6
70 #define SEDL_SPEEDFAX_PYRAMID 7
71 #define SEDL_SPEEDFAX_PCI 8
72 #define HST_SAPHIR3 9
74 #define SEDL_CHIP_TEST 0
75 #define SEDL_CHIP_ISAC_HSCX 1
76 #define SEDL_CHIP_ISAC_ISAR 2
77 #define SEDL_CHIP_IPAC 3
79 #define SEDL_BUS_ISA 1
80 #define SEDL_BUS_PCI 2
81 #define SEDL_BUS_PCMCIA 3
83 #define byteout(addr,val) outb(val,addr)
84 #define bytein(addr) inb(addr)
86 #define SEDL_HSCX_ISA_RESET_ON 0
87 #define SEDL_HSCX_ISA_RESET_OFF 1
88 #define SEDL_HSCX_ISA_ISAC 2
89 #define SEDL_HSCX_ISA_HSCX 3
90 #define SEDL_HSCX_ISA_ADR 4
92 #define SEDL_HSCX_PCMCIA_RESET 0
93 #define SEDL_HSCX_PCMCIA_ISAC 1
94 #define SEDL_HSCX_PCMCIA_HSCX 2
95 #define SEDL_HSCX_PCMCIA_ADR 4
97 #define SEDL_ISAR_ISA_ISAC 4
98 #define SEDL_ISAR_ISA_ISAR 6
99 #define SEDL_ISAR_ISA_ADR 8
100 #define SEDL_ISAR_ISA_ISAR_RESET_ON 10
101 #define SEDL_ISAR_ISA_ISAR_RESET_OFF 12
103 #define SEDL_IPAC_ANY_ADR 0
104 #define SEDL_IPAC_ANY_IPAC 2
106 #define SEDL_IPAC_PCI_BASE 0
107 #define SEDL_IPAC_PCI_ADR 0xc0
108 #define SEDL_IPAC_PCI_IPAC 0xc8
109 #define SEDL_ISAR_PCI_ADR 0xc8
110 #define SEDL_ISAR_PCI_ISAC 0xd0
111 #define SEDL_ISAR_PCI_ISAR 0xe0
112 #define SEDL_ISAR_PCI_ISAR_RESET_ON 0x01
113 #define SEDL_ISAR_PCI_ISAR_RESET_OFF 0x18
114 #define SEDL_ISAR_PCI_LED1 0x08
115 #define SEDL_ISAR_PCI_LED2 0x10
117 #define SEDL_RESET 0x3 /* same as DOS driver */
119 static inline u_char
120 readreg(unsigned int ale, unsigned int adr, u_char off)
122 register u_char ret;
124 byteout(ale, off);
125 ret = bytein(adr);
126 return (ret);
129 static inline void
130 readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
132 byteout(ale, off);
133 insb(adr, data, size);
137 static inline void
138 writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
140 byteout(ale, off);
141 byteout(adr, data);
144 static inline void
145 writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
147 byteout(ale, off);
148 outsb(adr, data, size);
151 /* Interface functions */
153 static u_char
154 ReadISAC(struct IsdnCardState *cs, u_char offset)
156 return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset));
159 static void
160 WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
162 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset, value);
165 static void
166 ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
168 readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
171 static void
172 WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
174 writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
177 static u_char
178 ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
180 return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80));
183 static void
184 WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
186 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80, value);
189 static void
190 ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
192 readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
195 static void
196 WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
198 writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
201 static u_char
202 ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
204 return (readreg(cs->hw.sedl.adr,
205 cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0)));
208 static void
209 WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
211 writereg(cs->hw.sedl.adr,
212 cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0), value);
215 /* ISAR access routines
216 * mode = 0 access with IRQ on
217 * mode = 1 access with IRQ off
218 * mode = 2 access with IRQ off and using last offset
221 static u_char
222 ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
224 if (mode == 0)
225 return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
226 else if (mode == 1)
227 byteout(cs->hw.sedl.adr, offset);
228 return(bytein(cs->hw.sedl.hscx));
231 static void
232 WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
234 if (mode == 0)
235 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset, value);
236 else {
237 if (mode == 1)
238 byteout(cs->hw.sedl.adr, offset);
239 byteout(cs->hw.sedl.hscx, value);
244 * fast interrupt HSCX stuff goes here
247 #define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
248 cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
249 #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
250 cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
252 #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
253 cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
255 #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
256 cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
258 #include "hscx_irq.c"
260 static irqreturn_t
261 sedlbauer_interrupt(int intno, void *dev_id)
263 struct IsdnCardState *cs = dev_id;
264 u_char val;
265 u_long flags;
267 spin_lock_irqsave(&cs->lock, flags);
268 if ((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) && (*cs->busy_flag == 1)) {
269 /* The card tends to generate interrupts while being removed
270 causing us to just crash the kernel. bad. */
271 spin_unlock_irqrestore(&cs->lock, flags);
272 printk(KERN_WARNING "Sedlbauer: card not available!\n");
273 return IRQ_NONE;
276 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
277 Start_HSCX:
278 if (val)
279 hscx_int_main(cs, val);
280 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
281 Start_ISAC:
282 if (val)
283 isac_interrupt(cs, val);
284 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
285 if (val) {
286 if (cs->debug & L1_DEB_HSCX)
287 debugl1(cs, "HSCX IntStat after IntRoutine");
288 goto Start_HSCX;
290 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
291 if (val) {
292 if (cs->debug & L1_DEB_ISAC)
293 debugl1(cs, "ISAC IntStat after IntRoutine");
294 goto Start_ISAC;
296 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0xFF);
297 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0xFF);
298 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
299 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
300 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0x0);
301 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0x0);
302 spin_unlock_irqrestore(&cs->lock, flags);
303 return IRQ_HANDLED;
306 static irqreturn_t
307 sedlbauer_interrupt_ipac(int intno, void *dev_id)
309 struct IsdnCardState *cs = dev_id;
310 u_char ista, val, icnt = 5;
311 u_long flags;
313 spin_lock_irqsave(&cs->lock, flags);
314 ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
315 Start_IPAC:
316 if (cs->debug & L1_DEB_IPAC)
317 debugl1(cs, "IPAC ISTA %02X", ista);
318 if (ista & 0x0f) {
319 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
320 if (ista & 0x01)
321 val |= 0x01;
322 if (ista & 0x04)
323 val |= 0x02;
324 if (ista & 0x08)
325 val |= 0x04;
326 if (val)
327 hscx_int_main(cs, val);
329 if (ista & 0x20) {
330 val = 0xfe & readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA | 0x80);
331 if (val) {
332 isac_interrupt(cs, val);
335 if (ista & 0x10) {
336 val = 0x01;
337 isac_interrupt(cs, val);
339 ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
340 if ((ista & 0x3f) && icnt) {
341 icnt--;
342 goto Start_IPAC;
344 if (!icnt)
345 if (cs->debug & L1_DEB_ISAC)
346 debugl1(cs, "Sedlbauer IRQ LOOP");
347 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xFF);
348 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xC0);
349 spin_unlock_irqrestore(&cs->lock, flags);
350 return IRQ_HANDLED;
353 static irqreturn_t
354 sedlbauer_interrupt_isar(int intno, void *dev_id)
356 struct IsdnCardState *cs = dev_id;
357 u_char val;
358 int cnt = 5;
359 u_long flags;
361 spin_lock_irqsave(&cs->lock, flags);
362 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
363 Start_ISAR:
364 if (val & ISAR_IRQSTA)
365 isar_int_main(cs);
366 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
367 Start_ISAC:
368 if (val)
369 isac_interrupt(cs, val);
370 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
371 if ((val & ISAR_IRQSTA) && --cnt) {
372 if (cs->debug & L1_DEB_HSCX)
373 debugl1(cs, "ISAR IntStat after IntRoutine");
374 goto Start_ISAR;
376 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
377 if (val && --cnt) {
378 if (cs->debug & L1_DEB_ISAC)
379 debugl1(cs, "ISAC IntStat after IntRoutine");
380 goto Start_ISAC;
382 if (!cnt)
383 if (cs->debug & L1_DEB_ISAC)
384 debugl1(cs, "Sedlbauer IRQ LOOP");
386 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, 0);
387 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
388 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
389 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, ISAR_IRQMSK);
390 spin_unlock_irqrestore(&cs->lock, flags);
391 return IRQ_HANDLED;
394 static void
395 release_io_sedlbauer(struct IsdnCardState *cs)
397 int bytecnt = 8;
399 if (cs->subtyp == SEDL_SPEED_FAX) {
400 bytecnt = 16;
401 } else if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
402 bytecnt = 256;
404 if (cs->hw.sedl.cfg_reg)
405 release_region(cs->hw.sedl.cfg_reg, bytecnt);
408 static void
409 reset_sedlbauer(struct IsdnCardState *cs)
411 printk(KERN_INFO "Sedlbauer: resetting card\n");
413 if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
414 (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
415 if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
416 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
417 mdelay(2);
418 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x0);
419 mdelay(10);
420 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_CONF, 0x0);
421 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ACFG, 0xff);
422 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_AOE, 0x0);
423 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
424 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
425 } else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
426 (cs->hw.sedl.bus == SEDL_BUS_PCI)) {
427 byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
428 mdelay(2);
429 byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
430 mdelay(10);
431 } else {
432 byteout(cs->hw.sedl.reset_on, SEDL_RESET); /* Reset On */
433 mdelay(2);
434 byteout(cs->hw.sedl.reset_off, 0); /* Reset Off */
435 mdelay(10);
440 static int
441 Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
443 u_long flags;
445 switch (mt) {
446 case CARD_RESET:
447 spin_lock_irqsave(&cs->lock, flags);
448 reset_sedlbauer(cs);
449 spin_unlock_irqrestore(&cs->lock, flags);
450 return(0);
451 case CARD_RELEASE:
452 if (cs->hw.sedl.bus == SEDL_BUS_PCI)
453 /* disable all IRQ */
454 byteout(cs->hw.sedl.cfg_reg+ 5, 0);
455 if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
456 spin_lock_irqsave(&cs->lock, flags);
457 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
458 ISAR_IRQBIT, 0);
459 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
460 ISAC_MASK, 0xFF);
461 reset_sedlbauer(cs);
462 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
463 ISAR_IRQBIT, 0);
464 writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
465 ISAC_MASK, 0xFF);
466 spin_unlock_irqrestore(&cs->lock, flags);
468 release_io_sedlbauer(cs);
469 return(0);
470 case CARD_INIT:
471 spin_lock_irqsave(&cs->lock, flags);
472 if (cs->hw.sedl.bus == SEDL_BUS_PCI)
473 /* enable all IRQ */
474 byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
475 reset_sedlbauer(cs);
476 if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
477 clear_pending_isac_ints(cs);
478 writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
479 ISAR_IRQBIT, 0);
480 initisac(cs);
481 initisar(cs);
482 /* Reenable all IRQ */
483 cs->writeisac(cs, ISAC_MASK, 0);
484 /* RESET Receiver and Transmitter */
485 cs->writeisac(cs, ISAC_CMDR, 0x41);
486 } else {
487 inithscxisac(cs, 3);
489 spin_unlock_irqrestore(&cs->lock, flags);
490 return(0);
491 case CARD_TEST:
492 return(0);
493 case MDL_INFO_CONN:
494 if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
495 return(0);
496 spin_lock_irqsave(&cs->lock, flags);
497 if ((long) arg)
498 cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
499 else
500 cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
501 byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
502 spin_unlock_irqrestore(&cs->lock, flags);
503 break;
504 case MDL_INFO_REL:
505 if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
506 return(0);
507 spin_lock_irqsave(&cs->lock, flags);
508 if ((long) arg)
509 cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
510 else
511 cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
512 byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
513 spin_unlock_irqrestore(&cs->lock, flags);
514 break;
516 return(0);
519 #ifdef __ISAPNP__
520 static struct isapnp_device_id sedl_ids[] __devinitdata = {
521 { ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
522 ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
523 (unsigned long) "Speed win" },
524 { ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
525 ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
526 (unsigned long) "Speed Fax+" },
527 { 0, }
530 static struct isapnp_device_id *ipid __devinitdata = &sedl_ids[0];
531 static struct pnp_card *pnp_c __devinitdata = NULL;
533 static int __devinit
534 setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
536 struct IsdnCardState *cs = card->cs;
537 struct pnp_dev *pnp_d;
539 if (!isapnp_present())
540 return -1;
542 while(ipid->card_vendor) {
543 if ((pnp_c = pnp_find_card(ipid->card_vendor,
544 ipid->card_device, pnp_c))) {
545 pnp_d = NULL;
546 if ((pnp_d = pnp_find_dev(pnp_c,
547 ipid->vendor, ipid->function, pnp_d))) {
548 int err;
550 printk(KERN_INFO "HiSax: %s detected\n",
551 (char *)ipid->driver_data);
552 pnp_disable_dev(pnp_d);
553 err = pnp_activate_dev(pnp_d);
554 if (err<0) {
555 printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
556 __func__, err);
557 return(0);
559 card->para[1] = pnp_port_start(pnp_d, 0);
560 card->para[0] = pnp_irq(pnp_d, 0);
562 if (!card->para[0] || !card->para[1]) {
563 printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
564 card->para[0], card->para[1]);
565 pnp_disable_dev(pnp_d);
566 return(0);
568 cs->hw.sedl.cfg_reg = card->para[1];
569 cs->irq = card->para[0];
570 if (ipid->function == ISAPNP_FUNCTION(0x2)) {
571 cs->subtyp = SEDL_SPEED_FAX;
572 cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
573 *bytecnt = 16;
574 } else {
575 cs->subtyp = SEDL_SPEED_CARD_WIN;
576 cs->hw.sedl.chip = SEDL_CHIP_TEST;
579 return (1);
580 } else {
581 printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
582 return(0);
585 ipid++;
586 pnp_c = NULL;
589 printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
590 return -1;
592 #else
594 static int __devinit
595 setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
597 return -1;
599 #endif /* __ISAPNP__ */
601 #ifdef CONFIG_PCI
602 static struct pci_dev *dev_sedl __devinitdata = NULL;
604 static int __devinit
605 setup_sedlbauer_pci(struct IsdnCard *card)
607 struct IsdnCardState *cs = card->cs;
608 u16 sub_vendor_id, sub_id;
610 if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
611 PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
612 if (pci_enable_device(dev_sedl))
613 return(0);
614 cs->irq = dev_sedl->irq;
615 if (!cs->irq) {
616 printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
617 return(0);
619 cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
620 } else {
621 printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
622 return(0);
624 cs->irq_flags |= IRQF_SHARED;
625 cs->hw.sedl.bus = SEDL_BUS_PCI;
626 sub_vendor_id = dev_sedl->subsystem_vendor;
627 sub_id = dev_sedl->subsystem_device;
628 printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
629 sub_vendor_id, sub_id);
630 printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
631 cs->hw.sedl.cfg_reg);
632 if (sub_id != PCI_SUB_ID_SEDLBAUER) {
633 printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
634 return(0);
636 if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
637 cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
638 cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
639 } else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
640 cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
641 cs->subtyp = SEDL_SPEEDFAX_PCI;
642 } else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
643 cs->hw.sedl.chip = SEDL_CHIP_IPAC;
644 cs->subtyp = HST_SAPHIR3;
645 } else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
646 cs->hw.sedl.chip = SEDL_CHIP_IPAC;
647 cs->subtyp = SEDL_SPEED_PCI;
648 } else {
649 printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
650 sub_vendor_id);
651 return(0);
654 cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
655 cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
656 byteout(cs->hw.sedl.cfg_reg, 0xff);
657 byteout(cs->hw.sedl.cfg_reg, 0x00);
658 byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
659 byteout(cs->hw.sedl.cfg_reg+ 5, 0); /* disable all IRQ */
660 byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
661 mdelay(2);
662 byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
663 mdelay(10);
665 return (1);
668 #else
670 static int __devinit
671 setup_sedlbauer_pci(struct IsdnCard *card)
673 return (1);
676 #endif /* CONFIG_PCI */
678 int __devinit
679 setup_sedlbauer(struct IsdnCard *card)
681 int bytecnt = 8, ver, val, rc;
682 struct IsdnCardState *cs = card->cs;
683 char tmp[64];
685 strcpy(tmp, Sedlbauer_revision);
686 printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
688 if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
689 cs->subtyp = SEDL_SPEED_CARD_WIN;
690 cs->hw.sedl.bus = SEDL_BUS_ISA;
691 cs->hw.sedl.chip = SEDL_CHIP_TEST;
692 } else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
693 cs->subtyp = SEDL_SPEED_STAR;
694 cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
695 cs->hw.sedl.chip = SEDL_CHIP_TEST;
696 } else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
697 cs->subtyp = SEDL_SPEED_FAX;
698 cs->hw.sedl.bus = SEDL_BUS_ISA;
699 cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
700 } else
701 return (0);
703 bytecnt = 8;
704 if (card->para[1]) {
705 cs->hw.sedl.cfg_reg = card->para[1];
706 cs->irq = card->para[0];
707 if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
708 bytecnt = 16;
710 } else {
711 rc = setup_sedlbauer_isapnp(card, &bytecnt);
712 if (!rc)
713 return (0);
714 if (rc > 0)
715 goto ready;
717 /* Probe for Sedlbauer speed pci */
718 rc = setup_sedlbauer_pci(card);
719 if (!rc)
720 return (0);
722 bytecnt = 256;
725 ready:
727 /* In case of the sedlbauer pcmcia card, this region is in use,
728 * reserved for us by the card manager. So we do not check it
729 * here, it would fail.
731 if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
732 !request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
733 printk(KERN_WARNING
734 "HiSax: %s config port %x-%x already in use\n",
735 CardType[card->typ],
736 cs->hw.sedl.cfg_reg,
737 cs->hw.sedl.cfg_reg + bytecnt);
738 return (0);
741 printk(KERN_INFO
742 "Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
743 cs->hw.sedl.cfg_reg,
744 cs->hw.sedl.cfg_reg + bytecnt,
745 cs->irq);
747 cs->BC_Read_Reg = &ReadHSCX;
748 cs->BC_Write_Reg = &WriteHSCX;
749 cs->BC_Send_Data = &hscx_fill_fifo;
750 cs->cardmsg = &Sedl_card_msg;
753 * testing ISA and PCMCIA Cards for IPAC, default is ISAC
754 * do not test for PCI card, because ports are different
755 * and PCI card uses only IPAC (for the moment)
757 if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
758 val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
759 cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
760 printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
761 if ((val == 1) || (val == 2)) {
762 /* IPAC */
763 cs->subtyp = SEDL_SPEED_WIN2_PC104;
764 if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
765 cs->subtyp = SEDL_SPEED_STAR2;
767 cs->hw.sedl.chip = SEDL_CHIP_IPAC;
768 } else {
769 /* ISAC_HSCX oder ISAC_ISAR */
770 if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
771 cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
777 * hw.sedl.chip is now properly set
779 printk(KERN_INFO "Sedlbauer: %s detected\n",
780 Sedlbauer_Types[cs->subtyp]);
782 setup_isac(cs);
783 if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
784 if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
785 cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
786 cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
787 cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
788 } else {
789 cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
790 cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
791 cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
793 test_and_set_bit(HW_IPAC, &cs->HW_Flags);
794 cs->readisac = &ReadISAC_IPAC;
795 cs->writeisac = &WriteISAC_IPAC;
796 cs->readisacfifo = &ReadISACfifo_IPAC;
797 cs->writeisacfifo = &WriteISACfifo_IPAC;
798 cs->irq_func = &sedlbauer_interrupt_ipac;
799 val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
800 printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
801 } else {
802 /* ISAC_HSCX oder ISAC_ISAR */
803 cs->readisac = &ReadISAC;
804 cs->writeisac = &WriteISAC;
805 cs->readisacfifo = &ReadISACfifo;
806 cs->writeisacfifo = &WriteISACfifo;
807 if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
808 if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
809 cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
810 SEDL_ISAR_PCI_ADR;
811 cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
812 SEDL_ISAR_PCI_ISAC;
813 cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
814 SEDL_ISAR_PCI_ISAR;
815 } else {
816 cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
817 SEDL_ISAR_ISA_ADR;
818 cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
819 SEDL_ISAR_ISA_ISAC;
820 cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
821 SEDL_ISAR_ISA_ISAR;
822 cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
823 SEDL_ISAR_ISA_ISAR_RESET_ON;
824 cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
825 SEDL_ISAR_ISA_ISAR_RESET_OFF;
827 cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
828 cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
829 test_and_set_bit(HW_ISAR, &cs->HW_Flags);
830 cs->irq_func = &sedlbauer_interrupt_isar;
831 cs->auxcmd = &isar_auxcmd;
832 ISACVersion(cs, "Sedlbauer:");
833 cs->BC_Read_Reg = &ReadISAR;
834 cs->BC_Write_Reg = &WriteISAR;
835 cs->BC_Send_Data = &isar_fill_fifo;
836 bytecnt = 3;
837 while (bytecnt) {
838 ver = ISARVersion(cs, "Sedlbauer:");
839 if (ver < 0)
840 printk(KERN_WARNING
841 "Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
842 else
843 break;
844 reset_sedlbauer(cs);
845 bytecnt--;
847 if (!bytecnt) {
848 release_io_sedlbauer(cs);
849 return (0);
851 } else {
852 if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
853 cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
854 cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
855 cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
856 cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
857 cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
858 cs->irq_flags |= IRQF_SHARED;
859 } else {
860 cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
861 cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
862 cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
863 cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
864 cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
866 cs->irq_func = &sedlbauer_interrupt;
867 ISACVersion(cs, "Sedlbauer:");
869 if (HscxVersion(cs, "Sedlbauer:")) {
870 printk(KERN_WARNING
871 "Sedlbauer: wrong HSCX versions check IO address\n");
872 release_io_sedlbauer(cs);
873 return (0);
877 return (1);