drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h

   1 /*
   2  * Copyright (C) 2003 - 2009 NetXen, Inc.
   3  * Copyright (C) 2009 - QLogic Corporation.
   4  * All rights reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version 2
   9  * of the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful, but
  12  * WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
  19  * MA  02111-1307, USA.
  20  *
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called "COPYING".
  23  *
  24  */
  25
  26 #ifndef __NETXEN_NIC_HW_H_
  27 #define __NETXEN_NIC_HW_H_
  28
  29 /* Hardware memory size of 128 meg */
  30 #define NETXEN_MEMADDR_MAX (128 * 1024 * 1024)
  31
  32 struct netxen_adapter;
  33
  34 #define NETXEN_PCI_MAPSIZE_BYTES  (NETXEN_PCI_MAPSIZE << 20)
  35
  36 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter);
  37
  38 /* Nibble or Byte mode for phy interface (GbE mode only) */
  39
  40 #define _netxen_crb_get_bit(var, bit)  ((var >> bit) & 0x1)
  41
  42 /*
  43  * NIU GB MAC Config Register 0 (applies to GB0, GB1, GB2, GB3)
  44  *
  45  *      Bit 0 : enable_tx => 1:enable frame xmit, 0:disable
  46  *      Bit 1 : tx_synced => R/O: xmit enable synched to xmit stream
  47  *      Bit 2 : enable_rx => 1:enable frame recv, 0:disable
  48  *      Bit 3 : rx_synced => R/O: recv enable synched to recv stream
  49  *      Bit 4 : tx_flowctl => 1:enable pause frame generation, 0:disable
  50  *      Bit 5 : rx_flowctl => 1:act on recv'd pause frames, 0:ignore
  51  *      Bit 8 : loopback => 1:loop MAC xmits to MAC recvs, 0:normal
  52  *      Bit 16: tx_reset_pb => 1:reset frame xmit protocol blk, 0:no-op
  53  *      Bit 17: rx_reset_pb => 1:reset frame recv protocol blk, 0:no-op
  54  *      Bit 18: tx_reset_mac => 1:reset data/ctl multiplexer blk, 0:no-op
  55  *      Bit 19: rx_reset_mac => 1:reset ctl frames & timers blk, 0:no-op
  56  *      Bit 31: soft_reset => 1:reset the MAC and the SERDES, 0:no-op
  57  */
  58
  59 #define netxen_gb_tx_flowctl(config_word)       \
  60         ((config_word) |= 1 << 4)
  61 #define netxen_gb_rx_flowctl(config_word)       \
  62         ((config_word) |= 1 << 5)
  63 #define netxen_gb_tx_reset_pb(config_word)      \
  64         ((config_word) |= 1 << 16)
  65 #define netxen_gb_rx_reset_pb(config_word)      \
  66         ((config_word) |= 1 << 17)
  67 #define netxen_gb_tx_reset_mac(config_word)     \
  68         ((config_word) |= 1 << 18)
  69 #define netxen_gb_rx_reset_mac(config_word)     \
  70         ((config_word) |= 1 << 19)
  71
  72 #define netxen_gb_unset_tx_flowctl(config_word) \
  73         ((config_word) &= ~(1 << 4))
  74 #define netxen_gb_unset_rx_flowctl(config_word) \
  75         ((config_word) &= ~(1 << 5))
  76
  77 #define netxen_gb_get_tx_synced(config_word)    \
  78                 _netxen_crb_get_bit((config_word), 1)
  79 #define netxen_gb_get_rx_synced(config_word)    \
  80                 _netxen_crb_get_bit((config_word), 3)
  81 #define netxen_gb_get_tx_flowctl(config_word)   \
  82                 _netxen_crb_get_bit((config_word), 4)
  83 #define netxen_gb_get_rx_flowctl(config_word)   \
  84                 _netxen_crb_get_bit((config_word), 5)
  85 #define netxen_gb_get_soft_reset(config_word)   \
  86                 _netxen_crb_get_bit((config_word), 31)
  87
  88 #define netxen_gb_get_stationaddress_low(config_word) ((config_word) >> 16)
  89
  90 #define netxen_gb_set_mii_mgmt_clockselect(config_word, val)    \
  91                 ((config_word) |= ((val) & 0x07))
  92 #define netxen_gb_mii_mgmt_reset(config_word)   \
  93                 ((config_word) |= 1 << 31)
  94 #define netxen_gb_mii_mgmt_unset(config_word)   \
  95                 ((config_word) &= ~(1 << 31))
  96
  97 /*
  98  * NIU GB MII Mgmt Command Register (applies to GB0, GB1, GB2, GB3)
  99  * Bit 0 : read_cycle => 1:perform single read cycle, 0:no-op
 100  * Bit 1 : scan_cycle => 1:perform continuous read cycles, 0:no-op
 101  */
 102
 103 #define netxen_gb_mii_mgmt_set_read_cycle(config_word)  \
 104                 ((config_word) |= 1 << 0)
 105 #define netxen_gb_mii_mgmt_reg_addr(config_word, val)   \
 106                 ((config_word) |= ((val) & 0x1F))
 107 #define netxen_gb_mii_mgmt_phy_addr(config_word, val)   \
 108                 ((config_word) |= (((val) & 0x1F) << 8))
 109
 110 /*
 111  * NIU GB MII Mgmt Indicators Register (applies to GB0, GB1, GB2, GB3)
 112  * Read-only register.
 113  * Bit 0 : busy => 1:performing an MII mgmt cycle, 0:idle
 114  * Bit 1 : scanning => 1:scan operation in progress, 0:idle
 115  * Bit 2 : notvalid => :mgmt result data not yet valid, 0:idle
 116  */
 117 #define netxen_get_gb_mii_mgmt_busy(config_word)        \
 118                 _netxen_crb_get_bit(config_word, 0)
 119 #define netxen_get_gb_mii_mgmt_scanning(config_word)    \
 120                 _netxen_crb_get_bit(config_word, 1)
 121 #define netxen_get_gb_mii_mgmt_notvalid(config_word)    \
 122                 _netxen_crb_get_bit(config_word, 2)
 123 /*
 124  * NIU XG Pause Ctl Register
 125  *
 126  *      Bit 0       : xg0_mask => 1:disable tx pause frames
 127  *      Bit 1       : xg0_request => 1:request single pause frame
 128  *      Bit 2       : xg0_on_off => 1:request is pause on, 0:off
 129  *      Bit 3       : xg1_mask => 1:disable tx pause frames
 130  *      Bit 4       : xg1_request => 1:request single pause frame
 131  *      Bit 5       : xg1_on_off => 1:request is pause on, 0:off
 132  */
 133
 134 #define netxen_xg_set_xg0_mask(config_word)    \
 135         ((config_word) |= 1 << 0)
 136 #define netxen_xg_set_xg1_mask(config_word)    \
 137         ((config_word) |= 1 << 3)
 138
 139 #define netxen_xg_get_xg0_mask(config_word)    \
 140         _netxen_crb_get_bit((config_word), 0)
 141 #define netxen_xg_get_xg1_mask(config_word)    \
 142         _netxen_crb_get_bit((config_word), 3)
 143
 144 #define netxen_xg_unset_xg0_mask(config_word)  \
 145         ((config_word) &= ~(1 << 0))
 146 #define netxen_xg_unset_xg1_mask(config_word)  \
 147         ((config_word) &= ~(1 << 3))
 148
 149 /*
 150  * NIU XG Pause Ctl Register
 151  *
 152  *      Bit 0       : xg0_mask => 1:disable tx pause frames
 153  *      Bit 1       : xg0_request => 1:request single pause frame
 154  *      Bit 2       : xg0_on_off => 1:request is pause on, 0:off
 155  *      Bit 3       : xg1_mask => 1:disable tx pause frames
 156  *      Bit 4       : xg1_request => 1:request single pause frame
 157  *      Bit 5       : xg1_on_off => 1:request is pause on, 0:off
 158  */
 159 #define netxen_gb_set_gb0_mask(config_word)    \
 160         ((config_word) |= 1 << 0)
 161 #define netxen_gb_set_gb1_mask(config_word)    \
 162         ((config_word) |= 1 << 2)
 163 #define netxen_gb_set_gb2_mask(config_word)    \
 164         ((config_word) |= 1 << 4)
 165 #define netxen_gb_set_gb3_mask(config_word)    \
 166         ((config_word) |= 1 << 6)
 167
 168 #define netxen_gb_get_gb0_mask(config_word)    \
 169         _netxen_crb_get_bit((config_word), 0)
 170 #define netxen_gb_get_gb1_mask(config_word)    \
 171         _netxen_crb_get_bit((config_word), 2)
 172 #define netxen_gb_get_gb2_mask(config_word)    \
 173         _netxen_crb_get_bit((config_word), 4)
 174 #define netxen_gb_get_gb3_mask(config_word)    \
 175         _netxen_crb_get_bit((config_word), 6)
 176
 177 #define netxen_gb_unset_gb0_mask(config_word)  \
 178         ((config_word) &= ~(1 << 0))
 179 #define netxen_gb_unset_gb1_mask(config_word)  \
 180         ((config_word) &= ~(1 << 2))
 181 #define netxen_gb_unset_gb2_mask(config_word)  \
 182         ((config_word) &= ~(1 << 4))
 183 #define netxen_gb_unset_gb3_mask(config_word)  \
 184         ((config_word) &= ~(1 << 6))
 185
 186
 187 /*
 188  * PHY-Specific MII control/status registers.
 189  */
 190 #define NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL             0
 191 #define NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS              1
 192 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0            2
 193 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1            3
 194 #define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG             4
 195 #define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART             5
 196 #define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE        6
 197 #define NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT       7
 198 #define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE    8
 199 #define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL      9
 200 #define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS       10
 201 #define NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS     15
 202 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL         16
 203 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS          17
 204 #define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE          18
 205 #define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS          19
 206 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE    20
 207 #define NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT    21
 208 #define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL         24
 209 #define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE        25
 210 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET        26
 211 #define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE     27
 212
 213 /*
 214  * PHY-Specific Status Register (reg 17).
 215  *
 216  * Bit 0      : jabber => 1:jabber detected, 0:not
 217  * Bit 1      : polarity => 1:polarity reversed, 0:normal
 218  * Bit 2      : recvpause => 1:receive pause enabled, 0:disabled
 219  * Bit 3      : xmitpause => 1:transmit pause enabled, 0:disabled
 220  * Bit 4      : energydetect => 1:sleep, 0:active
 221  * Bit 5      : downshift => 1:downshift, 0:no downshift
 222  * Bit 6      : crossover => 1:MDIX (crossover), 0:MDI (no crossover)
 223  * Bits 7-9   : cablelen => not valid in 10Mb/s mode
 224  *                      0:<50m, 1:50-80m, 2:80-110m, 3:110-140m, 4:>140m
 225  * Bit 10     : link => 1:link up, 0:link down
 226  * Bit 11     : resolved => 1:speed and duplex resolved, 0:not yet
 227  * Bit 12     : pagercvd => 1:page received, 0:page not received
 228  * Bit 13     : duplex => 1:full duplex, 0:half duplex
 229  * Bits 14-15 : speed => 0:10Mb/s, 1:100Mb/s, 2:1000Mb/s, 3:rsvd
 230  */
 231
 232 #define netxen_get_phy_speed(config_word) (((config_word) >> 14) & 0x03)
 233
 234 #define netxen_set_phy_speed(config_word, val)  \
 235                 ((config_word) |= ((val & 0x03) << 14))
 236 #define netxen_set_phy_duplex(config_word)      \
 237                 ((config_word) |= 1 << 13)
 238 #define netxen_clear_phy_duplex(config_word)    \
 239                 ((config_word) &= ~(1 << 13))
 240
 241 #define netxen_get_phy_link(config_word)        \
 242                 _netxen_crb_get_bit(config_word, 10)
 243 #define netxen_get_phy_duplex(config_word)      \
 244                 _netxen_crb_get_bit(config_word, 13)
 245
 246 /*
 247  * NIU Mode Register.
 248  * Bit 0 : enable FibreChannel
 249  * Bit 1 : enable 10/100/1000 Ethernet
 250  * Bit 2 : enable 10Gb Ethernet
 251  */
 252
 253 #define netxen_get_niu_enable_ge(config_word)   \
 254                 _netxen_crb_get_bit(config_word, 1)
 255
 256 #define NETXEN_NIU_NON_PROMISC_MODE     0
 257 #define NETXEN_NIU_PROMISC_MODE         1
 258 #define NETXEN_NIU_ALLMULTI_MODE        2
 259
 260 /*
 261  * NIU XG MAC Config Register
 262  *
 263  * Bit 0 : tx_enable => 1:enable frame xmit, 0:disable
 264  * Bit 2 : rx_enable => 1:enable frame recv, 0:disable
 265  * Bit 4 : soft_reset => 1:reset the MAC , 0:no-op
 266  * Bit 27: xaui_framer_reset
 267  * Bit 28: xaui_rx_reset
 268  * Bit 29: xaui_tx_reset
 269  * Bit 30: xg_ingress_afifo_reset
 270  * Bit 31: xg_egress_afifo_reset
 271  */
 272
 273 #define netxen_xg_soft_reset(config_word)       \
 274                 ((config_word) |= 1 << 4)
 275
 276 typedef struct {
 277         unsigned valid;
 278         unsigned start_128M;
 279         unsigned end_128M;
 280         unsigned start_2M;
 281 } crb_128M_2M_sub_block_map_t;
 282
 283 typedef struct {
 284         crb_128M_2M_sub_block_map_t sub_block[16];
 285 } crb_128M_2M_block_map_t;
 286
 287 #endif                          /* __NETXEN_NIC_HW_H_ */