drivers/net/wireless/b43/phy_ht.h

   1 #ifndef B43_PHY_HT_H_
   2 #define B43_PHY_HT_H_
   3
   4 #include "phy_common.h"
   5
   6
   7 #define B43_PHY_HT_BBCFG                        0x001 /* BB config */
   8 #define  B43_PHY_HT_BBCFG_RSTCCA                0x4000 /* Reset CCA */
   9 #define  B43_PHY_HT_BBCFG_RSTRX                 0x8000 /* Reset RX */
  10 #define B43_PHY_HT_BANDCTL                      0x009 /* Band control */
  11 #define  B43_PHY_HT_BANDCTL_5GHZ                0x0001 /* Use the 5GHz band */
  12 #define B43_PHY_HT_TABLE_ADDR                   0x072 /* Table address */
  13 #define B43_PHY_HT_TABLE_DATALO                 0x073 /* Table data low */
  14 #define B43_PHY_HT_TABLE_DATAHI                 0x074 /* Table data high */
  15 #define B43_PHY_HT_BW1                          0x1CE
  16 #define B43_PHY_HT_BW2                          0x1CF
  17 #define B43_PHY_HT_BW3                          0x1D0
  18 #define B43_PHY_HT_BW4                          0x1D1
  19 #define B43_PHY_HT_BW5                          0x1D2
  20 #define B43_PHY_HT_BW6                          0x1D3
  21
  22 #define B43_PHY_HT_C1_CLIP1THRES                B43_PHY_OFDM(0x00E)
  23 #define B43_PHY_HT_C2_CLIP1THRES                B43_PHY_OFDM(0x04E)
  24 #define B43_PHY_HT_C3_CLIP1THRES                B43_PHY_OFDM(0x08E)
  25
  26 #define B43_PHY_HT_RF_SEQ_MODE                  B43_PHY_EXTG(0x000)
  27 #define B43_PHY_HT_RF_SEQ_TRIG                  B43_PHY_EXTG(0x003)
  28 #define  B43_PHY_HT_RF_SEQ_TRIG_RX2TX           0x0001 /* RX2TX */
  29 #define  B43_PHY_HT_RF_SEQ_TRIG_TX2RX           0x0002 /* TX2RX */
  30 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGH            0x0004 /* Update gain H */
  31 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGL            0x0008 /* Update gain L */
  32 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGU            0x0010 /* Update gain U */
  33 #define  B43_PHY_HT_RF_SEQ_TRIG_RST2RX          0x0020 /* Reset to RX */
  34 #define B43_PHY_HT_RF_SEQ_STATUS                B43_PHY_EXTG(0x004)
  35 /* Values for the status are the same as for the trigger */
  36
  37 #define B43_PHY_HT_RF_CTL1                      B43_PHY_EXTG(0x010)
  38
  39 #define B43_PHY_HT_AFE_CTL1                     B43_PHY_EXTG(0x110)
  40 #define B43_PHY_HT_AFE_CTL2                     B43_PHY_EXTG(0x111)
  41 #define B43_PHY_HT_AFE_CTL3                     B43_PHY_EXTG(0x114)
  42 #define B43_PHY_HT_AFE_CTL4                     B43_PHY_EXTG(0x115)
  43 #define B43_PHY_HT_AFE_CTL5                     B43_PHY_EXTG(0x118)
  44 #define B43_PHY_HT_AFE_CTL6                     B43_PHY_EXTG(0x119)
  45
  46
  47 /* Values for PHY registers used on channel switching */
  48 struct b43_phy_ht_channeltab_e_phy {
  49         u16 bw1;
  50         u16 bw2;
  51         u16 bw3;
  52         u16 bw4;
  53         u16 bw5;
  54         u16 bw6;
  55 };
  56
  57
  58 struct b43_phy_ht {
  59 };
  60
  61
  62 struct b43_phy_operations;
  63 extern const struct b43_phy_operations b43_phyops_ht;
  64
  65 #endif /* B43_PHY_HT_H_ */