1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/init.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/sched.h>
35 #include <linux/skbuff.h>
36 #include <linux/netdevice.h>
37 #include <linux/firmware.h>
38 #include <linux/etherdevice.h>
39 #include <linux/if_arp.h>
41 #include <net/mac80211.h>
43 #include <asm/div64.h>
45 #include "iwl-eeprom.h"
50 #include "iwl-agn-calib.h"
52 #include "iwl-shared.h"
54 #include "iwl-trans.h"
56 /******************************************************************************
60 ******************************************************************************/
63 * module name, copyright, version, etc.
65 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
67 #ifdef CONFIG_IWLWIFI_DEBUG
73 #define DRV_VERSION IWLWIFI_VERSION VD
76 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
77 MODULE_VERSION(DRV_VERSION
);
78 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
79 MODULE_LICENSE("GPL");
80 MODULE_ALIAS("iwlagn");
82 void iwl_update_chain_flags(struct iwl_priv
*priv
)
84 struct iwl_rxon_context
*ctx
;
86 for_each_context(priv
, ctx
) {
87 iwlagn_set_rxon_chain(priv
, ctx
);
88 if (ctx
->active
.rx_chain
!= ctx
->staging
.rx_chain
)
89 iwlagn_commit_rxon(priv
, ctx
);
93 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
94 static void iwl_set_beacon_tim(struct iwl_priv
*priv
,
95 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
,
96 u8
*beacon
, u32 frame_size
)
99 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*)beacon
;
102 * The index is relative to frame start but we start looking at the
103 * variable-length part of the beacon.
105 tim_idx
= mgmt
->u
.beacon
.variable
- beacon
;
107 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
108 while ((tim_idx
< (frame_size
- 2)) &&
109 (beacon
[tim_idx
] != WLAN_EID_TIM
))
110 tim_idx
+= beacon
[tim_idx
+1] + 2;
112 /* If TIM field was found, set variables */
113 if ((tim_idx
< (frame_size
- 1)) && (beacon
[tim_idx
] == WLAN_EID_TIM
)) {
114 tx_beacon_cmd
->tim_idx
= cpu_to_le16(tim_idx
);
115 tx_beacon_cmd
->tim_size
= beacon
[tim_idx
+1];
117 IWL_WARN(priv
, "Unable to find TIM Element in beacon\n");
120 int iwlagn_send_beacon_cmd(struct iwl_priv
*priv
)
122 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
;
123 struct iwl_host_cmd cmd
= {
124 .id
= REPLY_TX_BEACON
,
127 struct ieee80211_tx_info
*info
;
133 * We have to set up the TX command, the TX Beacon command, and the
137 lockdep_assert_held(&priv
->shrd
->mutex
);
139 if (!priv
->beacon_ctx
) {
140 IWL_ERR(priv
, "trying to build beacon w/o beacon context!\n");
144 if (WARN_ON(!priv
->beacon_skb
))
147 /* Allocate beacon command */
148 if (!priv
->beacon_cmd
)
149 priv
->beacon_cmd
= kzalloc(sizeof(*tx_beacon_cmd
), GFP_KERNEL
);
150 tx_beacon_cmd
= priv
->beacon_cmd
;
154 frame_size
= priv
->beacon_skb
->len
;
156 /* Set up TX command fields */
157 tx_beacon_cmd
->tx
.len
= cpu_to_le16((u16
)frame_size
);
158 tx_beacon_cmd
->tx
.sta_id
= priv
->beacon_ctx
->bcast_sta_id
;
159 tx_beacon_cmd
->tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
160 tx_beacon_cmd
->tx
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
|
161 TX_CMD_FLG_TSF_MSK
| TX_CMD_FLG_STA_RATE_MSK
;
163 /* Set up TX beacon command fields */
164 iwl_set_beacon_tim(priv
, tx_beacon_cmd
, priv
->beacon_skb
->data
,
167 /* Set up packet rate and flags */
168 info
= IEEE80211_SKB_CB(priv
->beacon_skb
);
171 * Let's set up the rate at least somewhat correctly;
172 * it will currently not actually be used by the uCode,
173 * it uses the broadcast station's rate instead.
175 if (info
->control
.rates
[0].idx
< 0 ||
176 info
->control
.rates
[0].flags
& IEEE80211_TX_RC_MCS
)
179 rate
= info
->control
.rates
[0].idx
;
181 priv
->mgmt_tx_ant
= iwl_toggle_tx_ant(priv
, priv
->mgmt_tx_ant
,
182 hw_params(priv
).valid_tx_ant
);
183 rate_flags
= iwl_ant_idx_to_flags(priv
->mgmt_tx_ant
);
185 /* In mac80211, rates for 5 GHz start at 0 */
186 if (info
->band
== IEEE80211_BAND_5GHZ
)
187 rate
+= IWL_FIRST_OFDM_RATE
;
188 else if (rate
>= IWL_FIRST_CCK_RATE
&& rate
<= IWL_LAST_CCK_RATE
)
189 rate_flags
|= RATE_MCS_CCK_MSK
;
191 tx_beacon_cmd
->tx
.rate_n_flags
=
192 iwl_hw_set_rate_n_flags(rate
, rate_flags
);
195 cmd
.len
[0] = sizeof(*tx_beacon_cmd
);
196 cmd
.data
[0] = tx_beacon_cmd
;
197 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
198 cmd
.len
[1] = frame_size
;
199 cmd
.data
[1] = priv
->beacon_skb
->data
;
200 cmd
.dataflags
[1] = IWL_HCMD_DFL_NOCOPY
;
202 return iwl_trans_send_cmd(trans(priv
), &cmd
);
205 static void iwl_bg_beacon_update(struct work_struct
*work
)
207 struct iwl_priv
*priv
=
208 container_of(work
, struct iwl_priv
, beacon_update
);
209 struct sk_buff
*beacon
;
211 mutex_lock(&priv
->shrd
->mutex
);
212 if (!priv
->beacon_ctx
) {
213 IWL_ERR(priv
, "updating beacon w/o beacon context!\n");
217 if (priv
->beacon_ctx
->vif
->type
!= NL80211_IFTYPE_AP
) {
219 * The ucode will send beacon notifications even in
220 * IBSS mode, but we don't want to process them. But
221 * we need to defer the type check to here due to
222 * requiring locking around the beacon_ctx access.
227 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
228 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->beacon_ctx
->vif
);
230 IWL_ERR(priv
, "update beacon failed -- keeping old\n");
234 /* new beacon skb is allocated every time; dispose previous.*/
235 dev_kfree_skb(priv
->beacon_skb
);
237 priv
->beacon_skb
= beacon
;
239 iwlagn_send_beacon_cmd(priv
);
241 mutex_unlock(&priv
->shrd
->mutex
);
244 static void iwl_bg_bt_runtime_config(struct work_struct
*work
)
246 struct iwl_priv
*priv
=
247 container_of(work
, struct iwl_priv
, bt_runtime_config
);
249 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
252 /* dont send host command if rf-kill is on */
253 if (!iwl_is_ready_rf(priv
->shrd
))
255 iwlagn_send_advance_bt_config(priv
);
258 static void iwl_bg_bt_full_concurrency(struct work_struct
*work
)
260 struct iwl_priv
*priv
=
261 container_of(work
, struct iwl_priv
, bt_full_concurrency
);
262 struct iwl_rxon_context
*ctx
;
264 mutex_lock(&priv
->shrd
->mutex
);
266 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
269 /* dont send host command if rf-kill is on */
270 if (!iwl_is_ready_rf(priv
->shrd
))
273 IWL_DEBUG_INFO(priv
, "BT coex in %s mode\n",
274 priv
->bt_full_concurrent
?
275 "full concurrency" : "3-wire");
278 * LQ & RXON updated cmds must be sent before BT Config cmd
279 * to avoid 3-wire collisions
281 for_each_context(priv
, ctx
) {
282 iwlagn_set_rxon_chain(priv
, ctx
);
283 iwlagn_commit_rxon(priv
, ctx
);
286 iwlagn_send_advance_bt_config(priv
);
288 mutex_unlock(&priv
->shrd
->mutex
);
292 * iwl_bg_statistics_periodic - Timer callback to queue statistics
294 * This callback is provided in order to send a statistics request.
296 * This timer function is continually reset to execute within
297 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
298 * was received. We need to ensure we receive the statistics in order
299 * to update the temperature used for calibrating the TXPOWER.
301 static void iwl_bg_statistics_periodic(unsigned long data
)
303 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
305 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
308 /* dont send host command if rf-kill is on */
309 if (!iwl_is_ready_rf(priv
->shrd
))
312 iwl_send_statistics_request(priv
, CMD_ASYNC
, false);
316 static void iwl_print_cont_event_trace(struct iwl_priv
*priv
, u32 base
,
317 u32 start_idx
, u32 num_events
,
321 u32 ptr
; /* SRAM byte address of log data */
322 u32 ev
, time
, data
; /* event log data */
323 unsigned long reg_flags
;
326 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 2 * sizeof(u32
));
328 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 3 * sizeof(u32
));
330 /* Make sure device is powered up for SRAM reads */
331 spin_lock_irqsave(&bus(priv
)->reg_lock
, reg_flags
);
332 if (iwl_grab_nic_access(bus(priv
))) {
333 spin_unlock_irqrestore(&bus(priv
)->reg_lock
, reg_flags
);
337 /* Set starting address; reads will auto-increment */
338 iwl_write32(bus(priv
), HBUS_TARG_MEM_RADDR
, ptr
);
342 * "time" is actually "data" for mode 0 (no timestamp).
343 * place event id # at far right for easier visual parsing.
345 for (i
= 0; i
< num_events
; i
++) {
346 ev
= iwl_read32(bus(priv
), HBUS_TARG_MEM_RDAT
);
347 time
= iwl_read32(bus(priv
), HBUS_TARG_MEM_RDAT
);
349 trace_iwlwifi_dev_ucode_cont_event(priv
,
352 data
= iwl_read32(bus(priv
), HBUS_TARG_MEM_RDAT
);
353 trace_iwlwifi_dev_ucode_cont_event(priv
,
357 /* Allow device to power down */
358 iwl_release_nic_access(bus(priv
));
359 spin_unlock_irqrestore(&bus(priv
)->reg_lock
, reg_flags
);
362 static void iwl_continuous_event_trace(struct iwl_priv
*priv
)
364 u32 capacity
; /* event log capacity in # entries */
365 u32 base
; /* SRAM byte address of event log header */
366 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
367 u32 num_wraps
; /* # times uCode wrapped to top of log */
368 u32 next_entry
; /* index of next entry to be written by uCode */
370 base
= priv
->shrd
->device_pointers
.error_event_table
;
371 if (iwlagn_hw_valid_rtc_data_addr(base
)) {
372 capacity
= iwl_read_targ_mem(bus(priv
), base
);
373 num_wraps
= iwl_read_targ_mem(bus(priv
),
374 base
+ (2 * sizeof(u32
)));
375 mode
= iwl_read_targ_mem(bus(priv
), base
+ (1 * sizeof(u32
)));
376 next_entry
= iwl_read_targ_mem(bus(priv
),
377 base
+ (3 * sizeof(u32
)));
381 if (num_wraps
== priv
->event_log
.num_wraps
) {
382 iwl_print_cont_event_trace(priv
,
383 base
, priv
->event_log
.next_entry
,
384 next_entry
- priv
->event_log
.next_entry
,
386 priv
->event_log
.non_wraps_count
++;
388 if ((num_wraps
- priv
->event_log
.num_wraps
) > 1)
389 priv
->event_log
.wraps_more_count
++;
391 priv
->event_log
.wraps_once_count
++;
392 trace_iwlwifi_dev_ucode_wrap_event(priv
,
393 num_wraps
- priv
->event_log
.num_wraps
,
394 next_entry
, priv
->event_log
.next_entry
);
395 if (next_entry
< priv
->event_log
.next_entry
) {
396 iwl_print_cont_event_trace(priv
, base
,
397 priv
->event_log
.next_entry
,
398 capacity
- priv
->event_log
.next_entry
,
401 iwl_print_cont_event_trace(priv
, base
, 0,
404 iwl_print_cont_event_trace(priv
, base
,
405 next_entry
, capacity
- next_entry
,
408 iwl_print_cont_event_trace(priv
, base
, 0,
412 priv
->event_log
.num_wraps
= num_wraps
;
413 priv
->event_log
.next_entry
= next_entry
;
417 * iwl_bg_ucode_trace - Timer callback to log ucode event
419 * The timer is continually set to execute every
420 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
421 * this function is to perform continuous uCode event logging operation
424 static void iwl_bg_ucode_trace(unsigned long data
)
426 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
428 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
431 if (priv
->event_log
.ucode_trace
) {
432 iwl_continuous_event_trace(priv
);
433 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
434 mod_timer(&priv
->ucode_trace
,
435 jiffies
+ msecs_to_jiffies(UCODE_TRACE_PERIOD
));
439 static void iwl_bg_tx_flush(struct work_struct
*work
)
441 struct iwl_priv
*priv
=
442 container_of(work
, struct iwl_priv
, tx_flush
);
444 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
447 /* do nothing if rf-kill is on */
448 if (!iwl_is_ready_rf(priv
->shrd
))
451 IWL_DEBUG_INFO(priv
, "device request: flush all tx frames\n");
452 iwlagn_dev_txfifo_flush(priv
, IWL_DROP_ALL
);
455 static void iwl_init_context(struct iwl_priv
*priv
, u32 ucode_flags
)
460 * The default context is always valid,
461 * the PAN context depends on uCode.
463 priv
->shrd
->valid_contexts
= BIT(IWL_RXON_CTX_BSS
);
464 if (ucode_flags
& IWL_UCODE_TLV_FLAGS_PAN
)
465 priv
->shrd
->valid_contexts
|= BIT(IWL_RXON_CTX_PAN
);
467 for (i
= 0; i
< NUM_IWL_RXON_CTX
; i
++)
468 priv
->contexts
[i
].ctxid
= i
;
470 priv
->contexts
[IWL_RXON_CTX_BSS
].always_active
= true;
471 priv
->contexts
[IWL_RXON_CTX_BSS
].is_active
= true;
472 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_cmd
= REPLY_RXON
;
473 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_timing_cmd
= REPLY_RXON_TIMING
;
474 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_assoc_cmd
= REPLY_RXON_ASSOC
;
475 priv
->contexts
[IWL_RXON_CTX_BSS
].qos_cmd
= REPLY_QOS_PARAM
;
476 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_sta_id
= IWL_AP_ID
;
477 priv
->contexts
[IWL_RXON_CTX_BSS
].wep_key_cmd
= REPLY_WEPKEY
;
478 priv
->contexts
[IWL_RXON_CTX_BSS
].exclusive_interface_modes
=
479 BIT(NL80211_IFTYPE_ADHOC
);
480 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
=
481 BIT(NL80211_IFTYPE_STATION
);
482 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_devtype
= RXON_DEV_TYPE_AP
;
483 priv
->contexts
[IWL_RXON_CTX_BSS
].ibss_devtype
= RXON_DEV_TYPE_IBSS
;
484 priv
->contexts
[IWL_RXON_CTX_BSS
].station_devtype
= RXON_DEV_TYPE_ESS
;
485 priv
->contexts
[IWL_RXON_CTX_BSS
].unused_devtype
= RXON_DEV_TYPE_ESS
;
487 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_cmd
= REPLY_WIPAN_RXON
;
488 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_timing_cmd
=
489 REPLY_WIPAN_RXON_TIMING
;
490 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_assoc_cmd
=
491 REPLY_WIPAN_RXON_ASSOC
;
492 priv
->contexts
[IWL_RXON_CTX_PAN
].qos_cmd
= REPLY_WIPAN_QOS_PARAM
;
493 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_sta_id
= IWL_AP_ID_PAN
;
494 priv
->contexts
[IWL_RXON_CTX_PAN
].wep_key_cmd
= REPLY_WIPAN_WEPKEY
;
495 priv
->contexts
[IWL_RXON_CTX_PAN
].bcast_sta_id
= IWLAGN_PAN_BCAST_ID
;
496 priv
->contexts
[IWL_RXON_CTX_PAN
].station_flags
= STA_FLG_PAN_STATION
;
497 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
=
498 BIT(NL80211_IFTYPE_STATION
) | BIT(NL80211_IFTYPE_AP
);
500 if (ucode_flags
& IWL_UCODE_TLV_FLAGS_P2P
)
501 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
|=
502 BIT(NL80211_IFTYPE_P2P_CLIENT
) |
503 BIT(NL80211_IFTYPE_P2P_GO
);
505 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_devtype
= RXON_DEV_TYPE_CP
;
506 priv
->contexts
[IWL_RXON_CTX_PAN
].station_devtype
= RXON_DEV_TYPE_2STA
;
507 priv
->contexts
[IWL_RXON_CTX_PAN
].unused_devtype
= RXON_DEV_TYPE_P2P
;
509 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
512 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
);
514 #define UCODE_EXPERIMENTAL_INDEX 100
515 #define UCODE_EXPERIMENTAL_TAG "exp"
517 static int __must_check
iwl_request_firmware(struct iwl_priv
*priv
, bool first
)
519 const char *name_pre
= cfg(priv
)->fw_name_pre
;
523 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
524 priv
->fw_index
= UCODE_EXPERIMENTAL_INDEX
;
525 strcpy(tag
, UCODE_EXPERIMENTAL_TAG
);
526 } else if (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
) {
528 priv
->fw_index
= cfg(priv
)->ucode_api_max
;
529 sprintf(tag
, "%d", priv
->fw_index
);
532 sprintf(tag
, "%d", priv
->fw_index
);
535 if (priv
->fw_index
< cfg(priv
)->ucode_api_min
) {
536 IWL_ERR(priv
, "no suitable firmware found!\n");
540 sprintf(priv
->firmware_name
, "%s%s%s", name_pre
, tag
, ".ucode");
542 IWL_DEBUG_INFO(priv
, "attempting to load firmware %s'%s'\n",
543 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
544 ? "EXPERIMENTAL " : "",
545 priv
->firmware_name
);
547 return request_firmware_nowait(THIS_MODULE
, 1, priv
->firmware_name
,
549 GFP_KERNEL
, priv
, iwl_ucode_callback
);
552 struct iwlagn_firmware_pieces
{
553 const void *inst
, *data
, *init
, *init_data
, *wowlan_inst
, *wowlan_data
;
554 size_t inst_size
, data_size
, init_size
, init_data_size
,
555 wowlan_inst_size
, wowlan_data_size
;
559 u32 init_evtlog_ptr
, init_evtlog_size
, init_errlog_ptr
;
560 u32 inst_evtlog_ptr
, inst_evtlog_size
, inst_errlog_ptr
;
563 static int iwlagn_load_legacy_firmware(struct iwl_priv
*priv
,
564 const struct firmware
*ucode_raw
,
565 struct iwlagn_firmware_pieces
*pieces
)
567 struct iwl_ucode_header
*ucode
= (void *)ucode_raw
->data
;
568 u32 api_ver
, hdr_size
;
571 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
572 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
577 if (ucode_raw
->size
< hdr_size
) {
578 IWL_ERR(priv
, "File size too small!\n");
581 pieces
->build
= le32_to_cpu(ucode
->u
.v2
.build
);
582 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v2
.inst_size
);
583 pieces
->data_size
= le32_to_cpu(ucode
->u
.v2
.data_size
);
584 pieces
->init_size
= le32_to_cpu(ucode
->u
.v2
.init_size
);
585 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v2
.init_data_size
);
586 src
= ucode
->u
.v2
.data
;
592 if (ucode_raw
->size
< hdr_size
) {
593 IWL_ERR(priv
, "File size too small!\n");
597 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v1
.inst_size
);
598 pieces
->data_size
= le32_to_cpu(ucode
->u
.v1
.data_size
);
599 pieces
->init_size
= le32_to_cpu(ucode
->u
.v1
.init_size
);
600 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v1
.init_data_size
);
601 src
= ucode
->u
.v1
.data
;
605 /* Verify size of file vs. image size info in file's header */
606 if (ucode_raw
->size
!= hdr_size
+ pieces
->inst_size
+
607 pieces
->data_size
+ pieces
->init_size
+
608 pieces
->init_data_size
) {
611 "uCode file size %d does not match expected size\n",
612 (int)ucode_raw
->size
);
617 src
+= pieces
->inst_size
;
619 src
+= pieces
->data_size
;
621 src
+= pieces
->init_size
;
622 pieces
->init_data
= src
;
623 src
+= pieces
->init_data_size
;
628 static int iwlagn_load_firmware(struct iwl_priv
*priv
,
629 const struct firmware
*ucode_raw
,
630 struct iwlagn_firmware_pieces
*pieces
,
631 struct iwlagn_ucode_capabilities
*capa
)
633 struct iwl_tlv_ucode_header
*ucode
= (void *)ucode_raw
->data
;
634 struct iwl_ucode_tlv
*tlv
;
635 size_t len
= ucode_raw
->size
;
637 int wanted_alternative
= iwlagn_mod_params
.wanted_ucode_alternative
;
641 enum iwl_ucode_tlv_type tlv_type
;
644 if (len
< sizeof(*ucode
)) {
645 IWL_ERR(priv
, "uCode has invalid length: %zd\n", len
);
649 if (ucode
->magic
!= cpu_to_le32(IWL_TLV_UCODE_MAGIC
)) {
650 IWL_ERR(priv
, "invalid uCode magic: 0X%x\n",
651 le32_to_cpu(ucode
->magic
));
656 * Check which alternatives are present, and "downgrade"
657 * when the chosen alternative is not present, warning
658 * the user when that happens. Some files may not have
659 * any alternatives, so don't warn in that case.
661 alternatives
= le64_to_cpu(ucode
->alternatives
);
662 tmp
= wanted_alternative
;
663 if (wanted_alternative
> 63)
664 wanted_alternative
= 63;
665 while (wanted_alternative
&& !(alternatives
& BIT(wanted_alternative
)))
666 wanted_alternative
--;
667 if (wanted_alternative
&& wanted_alternative
!= tmp
)
669 "uCode alternative %d not available, choosing %d\n",
670 tmp
, wanted_alternative
);
672 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
673 pieces
->build
= le32_to_cpu(ucode
->build
);
676 len
-= sizeof(*ucode
);
678 while (len
>= sizeof(*tlv
)) {
684 tlv_len
= le32_to_cpu(tlv
->length
);
685 tlv_type
= le16_to_cpu(tlv
->type
);
686 tlv_alt
= le16_to_cpu(tlv
->alternative
);
687 tlv_data
= tlv
->data
;
690 IWL_ERR(priv
, "invalid TLV len: %zd/%u\n",
694 len
-= ALIGN(tlv_len
, 4);
695 data
+= sizeof(*tlv
) + ALIGN(tlv_len
, 4);
698 * Alternative 0 is always valid.
700 * Skip alternative TLVs that are not selected.
702 if (tlv_alt
!= 0 && tlv_alt
!= wanted_alternative
)
706 case IWL_UCODE_TLV_INST
:
707 pieces
->inst
= tlv_data
;
708 pieces
->inst_size
= tlv_len
;
710 case IWL_UCODE_TLV_DATA
:
711 pieces
->data
= tlv_data
;
712 pieces
->data_size
= tlv_len
;
714 case IWL_UCODE_TLV_INIT
:
715 pieces
->init
= tlv_data
;
716 pieces
->init_size
= tlv_len
;
718 case IWL_UCODE_TLV_INIT_DATA
:
719 pieces
->init_data
= tlv_data
;
720 pieces
->init_data_size
= tlv_len
;
722 case IWL_UCODE_TLV_BOOT
:
723 IWL_ERR(priv
, "Found unexpected BOOT ucode\n");
725 case IWL_UCODE_TLV_PROBE_MAX_LEN
:
726 if (tlv_len
!= sizeof(u32
))
727 goto invalid_tlv_len
;
728 capa
->max_probe_length
=
729 le32_to_cpup((__le32
*)tlv_data
);
731 case IWL_UCODE_TLV_PAN
:
733 goto invalid_tlv_len
;
734 capa
->flags
|= IWL_UCODE_TLV_FLAGS_PAN
;
736 case IWL_UCODE_TLV_FLAGS
:
737 /* must be at least one u32 */
738 if (tlv_len
< sizeof(u32
))
739 goto invalid_tlv_len
;
740 /* and a proper number of u32s */
741 if (tlv_len
% sizeof(u32
))
742 goto invalid_tlv_len
;
744 * This driver only reads the first u32 as
745 * right now no more features are defined,
746 * if that changes then either the driver
747 * will not work with the new firmware, or
748 * it'll not take advantage of new features.
750 capa
->flags
= le32_to_cpup((__le32
*)tlv_data
);
752 case IWL_UCODE_TLV_INIT_EVTLOG_PTR
:
753 if (tlv_len
!= sizeof(u32
))
754 goto invalid_tlv_len
;
755 pieces
->init_evtlog_ptr
=
756 le32_to_cpup((__le32
*)tlv_data
);
758 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE
:
759 if (tlv_len
!= sizeof(u32
))
760 goto invalid_tlv_len
;
761 pieces
->init_evtlog_size
=
762 le32_to_cpup((__le32
*)tlv_data
);
764 case IWL_UCODE_TLV_INIT_ERRLOG_PTR
:
765 if (tlv_len
!= sizeof(u32
))
766 goto invalid_tlv_len
;
767 pieces
->init_errlog_ptr
=
768 le32_to_cpup((__le32
*)tlv_data
);
770 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR
:
771 if (tlv_len
!= sizeof(u32
))
772 goto invalid_tlv_len
;
773 pieces
->inst_evtlog_ptr
=
774 le32_to_cpup((__le32
*)tlv_data
);
776 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
:
777 if (tlv_len
!= sizeof(u32
))
778 goto invalid_tlv_len
;
779 pieces
->inst_evtlog_size
=
780 le32_to_cpup((__le32
*)tlv_data
);
782 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR
:
783 if (tlv_len
!= sizeof(u32
))
784 goto invalid_tlv_len
;
785 pieces
->inst_errlog_ptr
=
786 le32_to_cpup((__le32
*)tlv_data
);
788 case IWL_UCODE_TLV_ENHANCE_SENS_TBL
:
790 goto invalid_tlv_len
;
791 priv
->enhance_sensitivity_table
= true;
793 case IWL_UCODE_TLV_WOWLAN_INST
:
794 pieces
->wowlan_inst
= tlv_data
;
795 pieces
->wowlan_inst_size
= tlv_len
;
797 case IWL_UCODE_TLV_WOWLAN_DATA
:
798 pieces
->wowlan_data
= tlv_data
;
799 pieces
->wowlan_data_size
= tlv_len
;
801 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
:
802 if (tlv_len
!= sizeof(u32
))
803 goto invalid_tlv_len
;
804 capa
->standard_phy_calibration_size
=
805 le32_to_cpup((__le32
*)tlv_data
);
808 IWL_DEBUG_INFO(priv
, "unknown TLV: %d\n", tlv_type
);
814 IWL_ERR(priv
, "invalid TLV after parsing: %zd\n", len
);
815 iwl_print_hex_dump(priv
, IWL_DL_FW
, (u8
*)data
, len
);
822 IWL_ERR(priv
, "TLV %d has invalid size: %u\n", tlv_type
, tlv_len
);
823 iwl_print_hex_dump(priv
, IWL_DL_FW
, tlv_data
, tlv_len
);
829 * iwl_ucode_callback - callback when firmware was loaded
831 * If loaded successfully, copies the firmware into buffers
832 * for the card to fetch (via DMA).
834 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
)
836 struct iwl_priv
*priv
= context
;
837 struct iwl_ucode_header
*ucode
;
839 struct iwlagn_firmware_pieces pieces
;
840 const unsigned int api_max
= cfg(priv
)->ucode_api_max
;
841 unsigned int api_ok
= cfg(priv
)->ucode_api_ok
;
842 const unsigned int api_min
= cfg(priv
)->ucode_api_min
;
846 struct iwlagn_ucode_capabilities ucode_capa
= {
847 .max_probe_length
= 200,
848 .standard_phy_calibration_size
=
849 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE
,
855 memset(&pieces
, 0, sizeof(pieces
));
858 if (priv
->fw_index
<= api_ok
)
860 "request for firmware file '%s' failed.\n",
861 priv
->firmware_name
);
865 IWL_DEBUG_INFO(priv
, "Loaded firmware file '%s' (%zd bytes).\n",
866 priv
->firmware_name
, ucode_raw
->size
);
868 /* Make sure that we got at least the API version number */
869 if (ucode_raw
->size
< 4) {
870 IWL_ERR(priv
, "File size way too small!\n");
874 /* Data from ucode file: header followed by uCode images */
875 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
878 err
= iwlagn_load_legacy_firmware(priv
, ucode_raw
, &pieces
);
880 err
= iwlagn_load_firmware(priv
, ucode_raw
, &pieces
,
886 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
887 build
= pieces
.build
;
890 * api_ver should match the api version forming part of the
891 * firmware filename ... but we don't check for that and only rely
892 * on the API version read from firmware header from here on forward
894 /* no api version check required for experimental uCode */
895 if (priv
->fw_index
!= UCODE_EXPERIMENTAL_INDEX
) {
896 if (api_ver
< api_min
|| api_ver
> api_max
) {
898 "Driver unable to support your firmware API. "
899 "Driver supports v%u, firmware is v%u.\n",
904 if (api_ver
< api_ok
) {
905 if (api_ok
!= api_max
)
906 IWL_ERR(priv
, "Firmware has old API version, "
907 "expected v%u through v%u, got v%u.\n",
908 api_ok
, api_max
, api_ver
);
910 IWL_ERR(priv
, "Firmware has old API version, "
911 "expected v%u, got v%u.\n",
913 IWL_ERR(priv
, "New firmware can be obtained from "
914 "http://www.intellinuxwireless.org/.\n");
919 sprintf(buildstr
, " build %u%s", build
,
920 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
925 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u%s\n",
926 IWL_UCODE_MAJOR(priv
->ucode_ver
),
927 IWL_UCODE_MINOR(priv
->ucode_ver
),
928 IWL_UCODE_API(priv
->ucode_ver
),
929 IWL_UCODE_SERIAL(priv
->ucode_ver
),
932 snprintf(priv
->hw
->wiphy
->fw_version
,
933 sizeof(priv
->hw
->wiphy
->fw_version
),
935 IWL_UCODE_MAJOR(priv
->ucode_ver
),
936 IWL_UCODE_MINOR(priv
->ucode_ver
),
937 IWL_UCODE_API(priv
->ucode_ver
),
938 IWL_UCODE_SERIAL(priv
->ucode_ver
),
942 * For any of the failures below (before allocating pci memory)
943 * we will try to load a version with a smaller API -- maybe the
944 * user just got a corrupted version of the latest API.
947 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
949 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %Zd\n",
951 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %Zd\n",
953 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %Zd\n",
955 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %Zd\n",
956 pieces
.init_data_size
);
958 /* Verify that uCode images will fit in card's SRAM */
959 if (pieces
.inst_size
> hw_params(priv
).max_inst_size
) {
960 IWL_ERR(priv
, "uCode instr len %Zd too large to fit in\n",
965 if (pieces
.data_size
> hw_params(priv
).max_data_size
) {
966 IWL_ERR(priv
, "uCode data len %Zd too large to fit in\n",
971 if (pieces
.init_size
> hw_params(priv
).max_inst_size
) {
972 IWL_ERR(priv
, "uCode init instr len %Zd too large to fit in\n",
977 if (pieces
.init_data_size
> hw_params(priv
).max_data_size
) {
978 IWL_ERR(priv
, "uCode init data len %Zd too large to fit in\n",
979 pieces
.init_data_size
);
983 /* Allocate ucode buffers for card's bus-master loading ... */
985 /* Runtime instructions and 2 copies of data:
986 * 1) unmodified from disk
987 * 2) backup cache for save/restore during power-downs */
988 if (iwl_alloc_fw_desc(bus(priv
), &trans(priv
)->ucode_rt
.code
,
989 pieces
.inst
, pieces
.inst_size
))
991 if (iwl_alloc_fw_desc(bus(priv
), &trans(priv
)->ucode_rt
.data
,
992 pieces
.data
, pieces
.data_size
))
995 /* Initialization instructions and data */
996 if (pieces
.init_size
&& pieces
.init_data_size
) {
997 if (iwl_alloc_fw_desc(bus(priv
), &trans(priv
)->ucode_init
.code
,
998 pieces
.init
, pieces
.init_size
))
1000 if (iwl_alloc_fw_desc(bus(priv
), &trans(priv
)->ucode_init
.data
,
1001 pieces
.init_data
, pieces
.init_data_size
))
1005 /* WoWLAN instructions and data */
1006 if (pieces
.wowlan_inst_size
&& pieces
.wowlan_data_size
) {
1007 if (iwl_alloc_fw_desc(bus(priv
),
1008 &trans(priv
)->ucode_wowlan
.code
,
1010 pieces
.wowlan_inst_size
))
1012 if (iwl_alloc_fw_desc(bus(priv
),
1013 &trans(priv
)->ucode_wowlan
.data
,
1015 pieces
.wowlan_data_size
))
1019 /* Now that we can no longer fail, copy information */
1022 * The (size - 16) / 12 formula is based on the information recorded
1023 * for each event, which is of mode 1 (including timestamp) for all
1024 * new microcodes that include this information.
1026 priv
->init_evtlog_ptr
= pieces
.init_evtlog_ptr
;
1027 if (pieces
.init_evtlog_size
)
1028 priv
->init_evtlog_size
= (pieces
.init_evtlog_size
- 16)/12;
1030 priv
->init_evtlog_size
=
1031 cfg(priv
)->base_params
->max_event_log_size
;
1032 priv
->init_errlog_ptr
= pieces
.init_errlog_ptr
;
1033 priv
->inst_evtlog_ptr
= pieces
.inst_evtlog_ptr
;
1034 if (pieces
.inst_evtlog_size
)
1035 priv
->inst_evtlog_size
= (pieces
.inst_evtlog_size
- 16)/12;
1037 priv
->inst_evtlog_size
=
1038 cfg(priv
)->base_params
->max_event_log_size
;
1039 priv
->inst_errlog_ptr
= pieces
.inst_errlog_ptr
;
1040 #ifndef CONFIG_IWLWIFI_P2P
1041 ucode_capa
.flags
&= ~IWL_UCODE_TLV_FLAGS_PAN
;
1044 priv
->new_scan_threshold_behaviour
=
1045 !!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_NEWSCAN
);
1047 if (!(cfg(priv
)->sku
& EEPROM_SKU_CAP_IPAN_ENABLE
))
1048 ucode_capa
.flags
&= ~IWL_UCODE_TLV_FLAGS_PAN
;
1051 * if not PAN, then don't support P2P -- might be a uCode
1052 * packaging bug or due to the eeprom check above
1054 if (!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
))
1055 ucode_capa
.flags
&= ~IWL_UCODE_TLV_FLAGS_P2P
;
1057 if (ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
) {
1058 priv
->sta_key_max_num
= STA_KEY_MAX_NUM_PAN
;
1059 priv
->shrd
->cmd_queue
= IWL_IPAN_CMD_QUEUE_NUM
;
1061 priv
->sta_key_max_num
= STA_KEY_MAX_NUM
;
1062 priv
->shrd
->cmd_queue
= IWL_DEFAULT_CMD_QUEUE_NUM
;
1065 * figure out the offset of chain noise reset and gain commands
1066 * base on the size of standard phy calibration commands table size
1068 if (ucode_capa
.standard_phy_calibration_size
>
1069 IWL_MAX_PHY_CALIBRATE_TBL_SIZE
)
1070 ucode_capa
.standard_phy_calibration_size
=
1071 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE
;
1073 priv
->phy_calib_chain_noise_reset_cmd
=
1074 ucode_capa
.standard_phy_calibration_size
;
1075 priv
->phy_calib_chain_noise_gain_cmd
=
1076 ucode_capa
.standard_phy_calibration_size
+ 1;
1078 /* initialize all valid contexts */
1079 iwl_init_context(priv
, ucode_capa
.flags
);
1081 /**************************************************
1082 * This is still part of probe() in a sense...
1084 * 9. Setup and register with mac80211 and debugfs
1085 **************************************************/
1086 err
= iwlagn_mac_setup_register(priv
, &ucode_capa
);
1090 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
1092 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
1094 /* We have our copies now, allow OS release its copies */
1095 release_firmware(ucode_raw
);
1096 complete(&priv
->firmware_loading_complete
);
1100 /* try next, if any */
1101 if (iwl_request_firmware(priv
, false))
1103 release_firmware(ucode_raw
);
1107 IWL_ERR(priv
, "failed to allocate pci memory\n");
1108 iwl_dealloc_ucode(trans(priv
));
1110 complete(&priv
->firmware_loading_complete
);
1111 device_release_driver(bus(priv
)->dev
);
1112 release_firmware(ucode_raw
);
1115 static void iwl_rf_kill_ct_config(struct iwl_priv
*priv
)
1117 struct iwl_ct_kill_config cmd
;
1118 struct iwl_ct_kill_throttling_config adv_cmd
;
1119 unsigned long flags
;
1122 spin_lock_irqsave(&priv
->shrd
->lock
, flags
);
1123 iwl_write32(bus(priv
), CSR_UCODE_DRV_GP1_CLR
,
1124 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT
);
1125 spin_unlock_irqrestore(&priv
->shrd
->lock
, flags
);
1126 priv
->thermal_throttle
.ct_kill_toggle
= false;
1128 if (cfg(priv
)->base_params
->support_ct_kill_exit
) {
1129 adv_cmd
.critical_temperature_enter
=
1130 cpu_to_le32(hw_params(priv
).ct_kill_threshold
);
1131 adv_cmd
.critical_temperature_exit
=
1132 cpu_to_le32(hw_params(priv
).ct_kill_exit_threshold
);
1134 ret
= iwl_trans_send_cmd_pdu(trans(priv
),
1135 REPLY_CT_KILL_CONFIG_CMD
,
1136 CMD_SYNC
, sizeof(adv_cmd
), &adv_cmd
);
1138 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1140 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1141 "succeeded, critical temperature enter is %d,"
1143 hw_params(priv
).ct_kill_threshold
,
1144 hw_params(priv
).ct_kill_exit_threshold
);
1146 cmd
.critical_temperature_R
=
1147 cpu_to_le32(hw_params(priv
).ct_kill_threshold
);
1149 ret
= iwl_trans_send_cmd_pdu(trans(priv
),
1150 REPLY_CT_KILL_CONFIG_CMD
,
1151 CMD_SYNC
, sizeof(cmd
), &cmd
);
1153 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1155 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1157 "critical temperature is %d\n",
1158 hw_params(priv
).ct_kill_threshold
);
1162 static int iwlagn_send_calib_cfg_rt(struct iwl_priv
*priv
, u32 cfg
)
1164 struct iwl_calib_cfg_cmd calib_cfg_cmd
;
1165 struct iwl_host_cmd cmd
= {
1166 .id
= CALIBRATION_CFG_CMD
,
1167 .len
= { sizeof(struct iwl_calib_cfg_cmd
), },
1168 .data
= { &calib_cfg_cmd
, },
1171 memset(&calib_cfg_cmd
, 0, sizeof(calib_cfg_cmd
));
1172 calib_cfg_cmd
.ucd_calib_cfg
.once
.is_enable
= IWL_CALIB_RT_CFG_ALL
;
1173 calib_cfg_cmd
.ucd_calib_cfg
.once
.start
= cpu_to_le32(cfg
);
1175 return iwl_trans_send_cmd(trans(priv
), &cmd
);
1179 static int iwlagn_send_tx_ant_config(struct iwl_priv
*priv
, u8 valid_tx_ant
)
1181 struct iwl_tx_ant_config_cmd tx_ant_cmd
= {
1182 .valid
= cpu_to_le32(valid_tx_ant
),
1185 if (IWL_UCODE_API(priv
->ucode_ver
) > 1) {
1186 IWL_DEBUG_HC(priv
, "select valid tx ant: %u\n", valid_tx_ant
);
1187 return iwl_trans_send_cmd_pdu(trans(priv
),
1188 TX_ANT_CONFIGURATION_CMD
,
1190 sizeof(struct iwl_tx_ant_config_cmd
),
1193 IWL_DEBUG_HC(priv
, "TX_ANT_CONFIGURATION_CMD not supported\n");
1199 * iwl_alive_start - called after REPLY_ALIVE notification received
1200 * from protocol/runtime uCode (initialization uCode's
1201 * Alive gets handled by iwl_init_alive_start()).
1203 int iwl_alive_start(struct iwl_priv
*priv
)
1206 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1208 /*TODO: this should go to the transport layer */
1209 iwl_reset_ict(trans(priv
));
1211 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
1213 /* After the ALIVE response, we can send host commands to the uCode */
1214 set_bit(STATUS_ALIVE
, &priv
->shrd
->status
);
1216 /* Enable watchdog to monitor the driver tx queues */
1217 iwl_setup_watchdog(priv
);
1219 if (iwl_is_rfkill(priv
->shrd
))
1222 /* download priority table before any calibration request */
1223 if (cfg(priv
)->bt_params
&&
1224 cfg(priv
)->bt_params
->advanced_bt_coexist
) {
1225 /* Configure Bluetooth device coexistence support */
1226 if (cfg(priv
)->bt_params
->bt_sco_disable
)
1227 priv
->bt_enable_pspoll
= false;
1229 priv
->bt_enable_pspoll
= true;
1231 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
1232 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
1233 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
1234 iwlagn_send_advance_bt_config(priv
);
1235 priv
->bt_valid
= IWLAGN_BT_VALID_ENABLE_FLAGS
;
1236 priv
->cur_rssi_ctx
= NULL
;
1238 iwl_send_prio_tbl(trans(priv
));
1240 /* FIXME: w/a to force change uCode BT state machine */
1241 ret
= iwl_send_bt_env(trans(priv
), IWL_BT_COEX_ENV_OPEN
,
1242 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
1245 ret
= iwl_send_bt_env(trans(priv
), IWL_BT_COEX_ENV_CLOSE
,
1246 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
1251 * default is 2-wire BT coexexistence support
1253 iwl_send_bt_config(priv
);
1257 * Perform runtime calibrations, including DC calibration.
1259 iwlagn_send_calib_cfg_rt(priv
, IWL_CALIB_CFG_DC_IDX
);
1261 ieee80211_wake_queues(priv
->hw
);
1263 priv
->active_rate
= IWL_RATES_MASK
;
1265 /* Configure Tx antenna selection based on H/W config */
1266 iwlagn_send_tx_ant_config(priv
, cfg(priv
)->valid_tx_ant
);
1268 if (iwl_is_associated_ctx(ctx
) && !priv
->shrd
->wowlan
) {
1269 struct iwl_rxon_cmd
*active_rxon
=
1270 (struct iwl_rxon_cmd
*)&ctx
->active
;
1271 /* apply any changes in staging */
1272 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
1273 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
1275 struct iwl_rxon_context
*tmp
;
1276 /* Initialize our rx_config data */
1277 for_each_context(priv
, tmp
)
1278 iwl_connection_init_rx_config(priv
, tmp
);
1280 iwlagn_set_rxon_chain(priv
, ctx
);
1283 if (!priv
->shrd
->wowlan
) {
1284 /* WoWLAN ucode will not reply in the same way, skip it */
1285 iwl_reset_run_time_calib(priv
);
1288 set_bit(STATUS_READY
, &priv
->shrd
->status
);
1290 /* Configure the adapter for unassociated operation */
1291 ret
= iwlagn_commit_rxon(priv
, ctx
);
1295 /* At this point, the NIC is initialized and operational */
1296 iwl_rf_kill_ct_config(priv
);
1298 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
1300 return iwl_power_update_mode(priv
, true);
1303 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
);
1305 void __iwl_down(struct iwl_priv
*priv
)
1309 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
1311 iwl_scan_cancel_timeout(priv
, 200);
1314 * If active, scanning won't cancel it, so say it expired.
1315 * No race since we hold the mutex here and a new one
1316 * can't come in at this time.
1318 ieee80211_remain_on_channel_expired(priv
->hw
);
1321 test_and_set_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
);
1323 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
1324 * to prevent rearm timer */
1325 del_timer_sync(&priv
->watchdog
);
1327 iwl_clear_ucode_stations(priv
, NULL
);
1328 iwl_dealloc_bcast_stations(priv
);
1329 iwl_clear_driver_stations(priv
);
1331 /* reset BT coex data */
1332 priv
->bt_status
= 0;
1333 priv
->cur_rssi_ctx
= NULL
;
1334 priv
->bt_is_sco
= 0;
1335 if (cfg(priv
)->bt_params
)
1336 priv
->bt_traffic_load
=
1337 cfg(priv
)->bt_params
->bt_init_traffic_load
;
1339 priv
->bt_traffic_load
= 0;
1340 priv
->bt_full_concurrent
= false;
1341 priv
->bt_ci_compliance
= 0;
1343 /* Wipe out the EXIT_PENDING status bit if we are not actually
1344 * exiting the module */
1346 clear_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
);
1348 if (priv
->mac80211_registered
)
1349 ieee80211_stop_queues(priv
->hw
);
1351 iwl_trans_stop_device(trans(priv
));
1353 /* Clear out all status bits but a few that are stable across reset */
1354 priv
->shrd
->status
&=
1355 test_bit(STATUS_RF_KILL_HW
, &priv
->shrd
->status
) <<
1357 test_bit(STATUS_GEO_CONFIGURED
, &priv
->shrd
->status
) <<
1358 STATUS_GEO_CONFIGURED
|
1359 test_bit(STATUS_FW_ERROR
, &priv
->shrd
->status
) <<
1361 test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
) <<
1362 STATUS_EXIT_PENDING
;
1364 dev_kfree_skb(priv
->beacon_skb
);
1365 priv
->beacon_skb
= NULL
;
1368 void iwl_down(struct iwl_priv
*priv
)
1370 mutex_lock(&priv
->shrd
->mutex
);
1372 mutex_unlock(&priv
->shrd
->mutex
);
1374 iwl_cancel_deferred_work(priv
);
1377 /*****************************************************************************
1379 * Workqueue callbacks
1381 *****************************************************************************/
1383 static void iwl_bg_run_time_calib_work(struct work_struct
*work
)
1385 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
1386 run_time_calib_work
);
1388 mutex_lock(&priv
->shrd
->mutex
);
1390 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
) ||
1391 test_bit(STATUS_SCANNING
, &priv
->shrd
->status
)) {
1392 mutex_unlock(&priv
->shrd
->mutex
);
1396 if (priv
->start_calib
) {
1397 iwl_chain_noise_calibration(priv
);
1398 iwl_sensitivity_calibration(priv
);
1401 mutex_unlock(&priv
->shrd
->mutex
);
1404 void iwlagn_prepare_restart(struct iwl_priv
*priv
)
1406 bool bt_full_concurrent
;
1407 u8 bt_ci_compliance
;
1412 lockdep_assert_held(&priv
->shrd
->mutex
);
1417 * __iwl_down() will clear the BT status variables,
1418 * which is correct, but when we restart we really
1419 * want to keep them so restore them afterwards.
1421 * The restart process will later pick them up and
1422 * re-configure the hw when we reconfigure the BT
1425 bt_full_concurrent
= priv
->bt_full_concurrent
;
1426 bt_ci_compliance
= priv
->bt_ci_compliance
;
1427 bt_load
= priv
->bt_traffic_load
;
1428 bt_status
= priv
->bt_status
;
1429 bt_is_sco
= priv
->bt_is_sco
;
1433 priv
->bt_full_concurrent
= bt_full_concurrent
;
1434 priv
->bt_ci_compliance
= bt_ci_compliance
;
1435 priv
->bt_traffic_load
= bt_load
;
1436 priv
->bt_status
= bt_status
;
1437 priv
->bt_is_sco
= bt_is_sco
;
1440 static void iwl_bg_restart(struct work_struct
*data
)
1442 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
1444 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
1447 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->shrd
->status
)) {
1448 mutex_lock(&priv
->shrd
->mutex
);
1449 iwlagn_prepare_restart(priv
);
1450 mutex_unlock(&priv
->shrd
->mutex
);
1451 iwl_cancel_deferred_work(priv
);
1452 ieee80211_restart_hw(priv
->hw
);
1461 void iwlagn_disable_roc(struct iwl_priv
*priv
)
1463 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
1465 lockdep_assert_held(&priv
->shrd
->mutex
);
1467 if (!priv
->hw_roc_setup
)
1470 ctx
->staging
.dev_type
= RXON_DEV_TYPE_P2P
;
1471 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
1473 priv
->hw_roc_channel
= NULL
;
1475 memset(ctx
->staging
.node_addr
, 0, ETH_ALEN
);
1477 iwlagn_commit_rxon(priv
, ctx
);
1479 ctx
->is_active
= false;
1480 priv
->hw_roc_setup
= false;
1483 static void iwlagn_disable_roc_work(struct work_struct
*work
)
1485 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
1486 hw_roc_disable_work
.work
);
1488 mutex_lock(&priv
->shrd
->mutex
);
1489 iwlagn_disable_roc(priv
);
1490 mutex_unlock(&priv
->shrd
->mutex
);
1493 /*****************************************************************************
1495 * driver setup and teardown
1497 *****************************************************************************/
1499 static void iwl_setup_deferred_work(struct iwl_priv
*priv
)
1501 priv
->shrd
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
1503 init_waitqueue_head(&priv
->shrd
->wait_command_queue
);
1505 INIT_WORK(&priv
->restart
, iwl_bg_restart
);
1506 INIT_WORK(&priv
->beacon_update
, iwl_bg_beacon_update
);
1507 INIT_WORK(&priv
->run_time_calib_work
, iwl_bg_run_time_calib_work
);
1508 INIT_WORK(&priv
->tx_flush
, iwl_bg_tx_flush
);
1509 INIT_WORK(&priv
->bt_full_concurrency
, iwl_bg_bt_full_concurrency
);
1510 INIT_WORK(&priv
->bt_runtime_config
, iwl_bg_bt_runtime_config
);
1511 INIT_DELAYED_WORK(&priv
->hw_roc_disable_work
,
1512 iwlagn_disable_roc_work
);
1514 iwl_setup_scan_deferred_work(priv
);
1516 if (cfg(priv
)->lib
->bt_setup_deferred_work
)
1517 cfg(priv
)->lib
->bt_setup_deferred_work(priv
);
1519 init_timer(&priv
->statistics_periodic
);
1520 priv
->statistics_periodic
.data
= (unsigned long)priv
;
1521 priv
->statistics_periodic
.function
= iwl_bg_statistics_periodic
;
1523 init_timer(&priv
->ucode_trace
);
1524 priv
->ucode_trace
.data
= (unsigned long)priv
;
1525 priv
->ucode_trace
.function
= iwl_bg_ucode_trace
;
1527 init_timer(&priv
->watchdog
);
1528 priv
->watchdog
.data
= (unsigned long)priv
;
1529 priv
->watchdog
.function
= iwl_bg_watchdog
;
1532 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
)
1534 if (cfg(priv
)->lib
->cancel_deferred_work
)
1535 cfg(priv
)->lib
->cancel_deferred_work(priv
);
1537 cancel_work_sync(&priv
->run_time_calib_work
);
1538 cancel_work_sync(&priv
->beacon_update
);
1540 iwl_cancel_scan_deferred_work(priv
);
1542 cancel_work_sync(&priv
->bt_full_concurrency
);
1543 cancel_work_sync(&priv
->bt_runtime_config
);
1544 cancel_delayed_work_sync(&priv
->hw_roc_disable_work
);
1546 del_timer_sync(&priv
->statistics_periodic
);
1547 del_timer_sync(&priv
->ucode_trace
);
1550 static void iwl_init_hw_rates(struct iwl_priv
*priv
,
1551 struct ieee80211_rate
*rates
)
1555 for (i
= 0; i
< IWL_RATE_COUNT_LEGACY
; i
++) {
1556 rates
[i
].bitrate
= iwl_rates
[i
].ieee
* 5;
1557 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
1558 rates
[i
].hw_value_short
= i
;
1560 if ((i
>= IWL_FIRST_CCK_RATE
) && (i
<= IWL_LAST_CCK_RATE
)) {
1562 * If CCK != 1M then set short preamble rate flag.
1565 (iwl_rates
[i
].plcp
== IWL_RATE_1M_PLCP
) ?
1566 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
1571 static int iwl_init_drv(struct iwl_priv
*priv
)
1575 spin_lock_init(&priv
->shrd
->sta_lock
);
1577 mutex_init(&priv
->shrd
->mutex
);
1579 INIT_LIST_HEAD(&trans(priv
)->calib_results
);
1581 priv
->ieee_channels
= NULL
;
1582 priv
->ieee_rates
= NULL
;
1583 priv
->band
= IEEE80211_BAND_2GHZ
;
1585 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
1586 priv
->current_ht_config
.smps
= IEEE80211_SMPS_STATIC
;
1587 priv
->missed_beacon_threshold
= IWL_MISSED_BEACON_THRESHOLD_DEF
;
1588 priv
->agg_tids_count
= 0;
1590 /* initialize force reset */
1591 priv
->force_reset
[IWL_RF_RESET
].reset_duration
=
1592 IWL_DELAY_NEXT_FORCE_RF_RESET
;
1593 priv
->force_reset
[IWL_FW_RESET
].reset_duration
=
1594 IWL_DELAY_NEXT_FORCE_FW_RELOAD
;
1596 priv
->rx_statistics_jiffies
= jiffies
;
1598 /* Choose which receivers/antennas to use */
1599 iwlagn_set_rxon_chain(priv
, &priv
->contexts
[IWL_RXON_CTX_BSS
]);
1601 iwl_init_scan_params(priv
);
1604 if (cfg(priv
)->bt_params
&&
1605 cfg(priv
)->bt_params
->advanced_bt_coexist
) {
1606 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
1607 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
1608 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
1609 priv
->bt_on_thresh
= BT_ON_THRESHOLD_DEF
;
1610 priv
->bt_duration
= BT_DURATION_LIMIT_DEF
;
1611 priv
->dynamic_frag_thresh
= BT_FRAG_THRESHOLD_DEF
;
1614 ret
= iwl_init_channel_map(priv
);
1616 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
1620 ret
= iwl_init_geos(priv
);
1622 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
1623 goto err_free_channel_map
;
1625 iwl_init_hw_rates(priv
, priv
->ieee_rates
);
1629 err_free_channel_map
:
1630 iwl_free_channel_map(priv
);
1635 static void iwl_uninit_drv(struct iwl_priv
*priv
)
1637 iwl_free_geos(priv
);
1638 iwl_free_channel_map(priv
);
1639 if (priv
->tx_cmd_pool
)
1640 kmem_cache_destroy(priv
->tx_cmd_pool
);
1641 kfree(priv
->scan_cmd
);
1642 kfree(priv
->beacon_cmd
);
1643 kfree(rcu_dereference_raw(priv
->noa_data
));
1644 #ifdef CONFIG_IWLWIFI_DEBUGFS
1645 kfree(priv
->wowlan_sram
);
1651 static u32
iwl_hw_detect(struct iwl_priv
*priv
)
1653 return iwl_read32(bus(priv
), CSR_HW_REV
);
1656 /* Size of one Rx buffer in host DRAM */
1657 #define IWL_RX_BUF_SIZE_4K (4 * 1024)
1658 #define IWL_RX_BUF_SIZE_8K (8 * 1024)
1660 static int iwl_set_hw_params(struct iwl_priv
*priv
)
1662 if (iwlagn_mod_params
.amsdu_size_8K
)
1663 hw_params(priv
).rx_page_order
=
1664 get_order(IWL_RX_BUF_SIZE_8K
);
1666 hw_params(priv
).rx_page_order
=
1667 get_order(IWL_RX_BUF_SIZE_4K
);
1669 if (iwlagn_mod_params
.disable_11n
& IWL_DISABLE_HT_ALL
)
1670 cfg(priv
)->sku
&= ~EEPROM_SKU_CAP_11N_ENABLE
;
1672 hw_params(priv
).num_ampdu_queues
=
1673 cfg(priv
)->base_params
->num_of_ampdu_queues
;
1674 hw_params(priv
).shadow_reg_enable
=
1675 cfg(priv
)->base_params
->shadow_reg_enable
;
1676 hw_params(priv
).sku
= cfg(priv
)->sku
;
1677 hw_params(priv
).wd_timeout
= cfg(priv
)->base_params
->wd_timeout
;
1679 /* Device-specific setup */
1680 return cfg(priv
)->lib
->set_hw_params(priv
);
1685 static void iwl_debug_config(struct iwl_priv
*priv
)
1687 dev_printk(KERN_INFO
, bus(priv
)->dev
, "CONFIG_IWLWIFI_DEBUG "
1688 #ifdef CONFIG_IWLWIFI_DEBUG
1693 dev_printk(KERN_INFO
, bus(priv
)->dev
, "CONFIG_IWLWIFI_DEBUGFS "
1694 #ifdef CONFIG_IWLWIFI_DEBUGFS
1699 dev_printk(KERN_INFO
, bus(priv
)->dev
, "CONFIG_IWLWIFI_DEVICE_TRACING "
1700 #ifdef CONFIG_IWLWIFI_DEVICE_TRACING
1706 dev_printk(KERN_INFO
, bus(priv
)->dev
, "CONFIG_IWLWIFI_DEVICE_TESTMODE "
1707 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
1712 dev_printk(KERN_INFO
, bus(priv
)->dev
, "CONFIG_IWLWIFI_P2P "
1713 #ifdef CONFIG_IWLWIFI_P2P
1720 int iwl_probe(struct iwl_bus
*bus
, const struct iwl_trans_ops
*trans_ops
,
1721 struct iwl_cfg
*cfg
)
1724 struct iwl_priv
*priv
;
1725 struct ieee80211_hw
*hw
;
1729 /************************
1730 * 1. Allocating HW data
1731 ************************/
1732 hw
= iwl_alloc_all();
1734 pr_err("%s: Cannot allocate network device\n", cfg
->name
);
1740 priv
->shrd
= &priv
->_shrd
;
1741 bus
->shrd
= priv
->shrd
;
1742 priv
->shrd
->bus
= bus
;
1743 priv
->shrd
->priv
= priv
;
1745 priv
->shrd
->trans
= trans_ops
->alloc(priv
->shrd
);
1746 if (priv
->shrd
->trans
== NULL
) {
1748 goto out_free_traffic_mem
;
1751 /* At this point both hw and priv are allocated. */
1753 SET_IEEE80211_DEV(hw
, bus(priv
)->dev
);
1755 /* what debugging capabilities we have */
1756 iwl_debug_config(priv
);
1758 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
1761 /* is antenna coupling more than 35dB ? */
1762 priv
->bt_ant_couple_ok
=
1763 (iwlagn_mod_params
.ant_coupling
>
1764 IWL_BT_ANTENNA_COUPLING_THRESHOLD
) ?
1767 /* enable/disable bt channel inhibition */
1768 priv
->bt_ch_announce
= iwlagn_mod_params
.bt_ch_announce
;
1769 IWL_DEBUG_INFO(priv
, "BT channel inhibition is %s\n",
1770 (priv
->bt_ch_announce
) ? "On" : "Off");
1772 if (iwl_alloc_traffic_mem(priv
))
1773 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
1775 /* these spin locks will be used in apm_ops.init and EEPROM access
1776 * we should init now
1778 spin_lock_init(&bus(priv
)->reg_lock
);
1779 spin_lock_init(&priv
->shrd
->lock
);
1782 * stop and reset the on-board processor just in case it is in a
1783 * strange state ... like being left stranded by a primary kernel
1784 * and this is now the kdump kernel trying to start up
1786 iwl_write32(bus(priv
), CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
1788 /***********************
1789 * 3. Read REV register
1790 ***********************/
1791 hw_rev
= iwl_hw_detect(priv
);
1792 IWL_INFO(priv
, "Detected %s, REV=0x%X\n",
1793 cfg(priv
)->name
, hw_rev
);
1795 err
= iwl_trans_request_irq(trans(priv
));
1797 goto out_free_trans
;
1799 if (iwl_trans_prepare_card_hw(trans(priv
))) {
1801 IWL_WARN(priv
, "Failed, HW not ready\n");
1802 goto out_free_trans
;
1808 /* Read the EEPROM */
1809 err
= iwl_eeprom_init(priv
, hw_rev
);
1811 IWL_ERR(priv
, "Unable to init EEPROM\n");
1812 goto out_free_trans
;
1814 err
= iwl_eeprom_check_version(priv
);
1816 goto out_free_eeprom
;
1818 err
= iwl_eeprom_check_sku(priv
);
1820 goto out_free_eeprom
;
1822 /* extract MAC Address */
1823 iwl_eeprom_get_mac(priv
->shrd
, priv
->addresses
[0].addr
);
1824 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->addresses
[0].addr
);
1825 priv
->hw
->wiphy
->addresses
= priv
->addresses
;
1826 priv
->hw
->wiphy
->n_addresses
= 1;
1827 num_mac
= iwl_eeprom_query16(priv
->shrd
, EEPROM_NUM_MAC_ADDRESS
);
1829 memcpy(priv
->addresses
[1].addr
, priv
->addresses
[0].addr
,
1831 priv
->addresses
[1].addr
[5]++;
1832 priv
->hw
->wiphy
->n_addresses
++;
1835 /************************
1836 * 5. Setup HW constants
1837 ************************/
1838 if (iwl_set_hw_params(priv
)) {
1840 IWL_ERR(priv
, "failed to set hw parameters\n");
1841 goto out_free_eeprom
;
1844 /*******************
1846 *******************/
1848 err
= iwl_init_drv(priv
);
1850 goto out_free_eeprom
;
1851 /* At this point both hw and priv are initialized. */
1853 /********************
1855 ********************/
1856 iwl_setup_deferred_work(priv
);
1857 iwl_setup_rx_handlers(priv
);
1858 iwl_testmode_init(priv
);
1860 /*********************************************
1861 * 8. Enable interrupts
1862 *********************************************/
1864 iwl_enable_rfkill_int(priv
);
1866 /* If platform's RF_KILL switch is NOT set to KILL */
1867 if (iwl_read32(bus(priv
),
1868 CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
1869 clear_bit(STATUS_RF_KILL_HW
, &priv
->shrd
->status
);
1871 set_bit(STATUS_RF_KILL_HW
, &priv
->shrd
->status
);
1873 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
1874 test_bit(STATUS_RF_KILL_HW
, &priv
->shrd
->status
));
1876 iwl_power_initialize(priv
);
1877 iwl_tt_initialize(priv
);
1879 init_completion(&priv
->firmware_loading_complete
);
1881 err
= iwl_request_firmware(priv
, true);
1883 goto out_destroy_workqueue
;
1887 out_destroy_workqueue
:
1888 destroy_workqueue(priv
->shrd
->workqueue
);
1889 priv
->shrd
->workqueue
= NULL
;
1890 iwl_uninit_drv(priv
);
1892 iwl_eeprom_free(priv
->shrd
);
1894 iwl_trans_free(trans(priv
));
1895 out_free_traffic_mem
:
1896 iwl_free_traffic_mem(priv
);
1897 ieee80211_free_hw(priv
->hw
);
1902 void __devexit
iwl_remove(struct iwl_priv
* priv
)
1904 wait_for_completion(&priv
->firmware_loading_complete
);
1906 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
1908 iwl_dbgfs_unregister(priv
);
1910 /* ieee80211_unregister_hw call wil cause iwlagn_mac_stop to
1911 * to be called and iwl_down since we are removing the device
1912 * we need to set STATUS_EXIT_PENDING bit.
1914 set_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
);
1916 iwl_testmode_cleanup(priv
);
1917 iwlagn_mac_unregister(priv
);
1921 /*This will stop the queues, move the device to low power state */
1922 iwl_trans_stop_device(trans(priv
));
1924 iwl_dealloc_ucode(trans(priv
));
1926 iwl_eeprom_free(priv
->shrd
);
1928 /*netif_stop_queue(dev); */
1929 flush_workqueue(priv
->shrd
->workqueue
);
1931 /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
1932 * priv->shrd->workqueue... so we can't take down the workqueue
1934 destroy_workqueue(priv
->shrd
->workqueue
);
1935 priv
->shrd
->workqueue
= NULL
;
1936 iwl_free_traffic_mem(priv
);
1938 iwl_trans_free(trans(priv
));
1940 iwl_uninit_drv(priv
);
1942 dev_kfree_skb(priv
->beacon_skb
);
1944 ieee80211_free_hw(priv
->hw
);
1948 /*****************************************************************************
1950 * driver and module entry point
1952 *****************************************************************************/
1953 static int __init
iwl_init(void)
1957 pr_info(DRV_DESCRIPTION
", " DRV_VERSION
"\n");
1958 pr_info(DRV_COPYRIGHT
"\n");
1960 ret
= iwlagn_rate_control_register();
1962 pr_err("Unable to register rate control algorithm: %d\n", ret
);
1966 ret
= iwl_pci_register_driver();
1969 goto error_register
;
1973 iwlagn_rate_control_unregister();
1977 static void __exit
iwl_exit(void)
1979 iwl_pci_unregister_driver();
1980 iwlagn_rate_control_unregister();
1983 module_exit(iwl_exit
);
1984 module_init(iwl_init
);
1986 #ifdef CONFIG_IWLWIFI_DEBUG
1987 module_param_named(debug
, iwlagn_mod_params
.debug_level
, uint
,
1989 MODULE_PARM_DESC(debug
, "debug output mask");
1992 module_param_named(swcrypto
, iwlagn_mod_params
.sw_crypto
, int, S_IRUGO
);
1993 MODULE_PARM_DESC(swcrypto
, "using crypto in software (default 0 [hardware])");
1994 module_param_named(queues_num
, iwlagn_mod_params
.num_of_queues
, int, S_IRUGO
);
1995 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
1996 module_param_named(11n_disable
, iwlagn_mod_params
.disable_11n
, uint
, S_IRUGO
);
1997 MODULE_PARM_DESC(11n_disable
,
1998 "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
1999 module_param_named(amsdu_size_8K
, iwlagn_mod_params
.amsdu_size_8K
,
2001 MODULE_PARM_DESC(amsdu_size_8K
, "enable 8K amsdu size");
2002 module_param_named(fw_restart
, iwlagn_mod_params
.restart_fw
, int, S_IRUGO
);
2003 MODULE_PARM_DESC(fw_restart
, "restart firmware in case of error");
2005 module_param_named(ucode_alternative
,
2006 iwlagn_mod_params
.wanted_ucode_alternative
,
2008 MODULE_PARM_DESC(ucode_alternative
,
2009 "specify ucode alternative to use from ucode file");
2011 module_param_named(antenna_coupling
, iwlagn_mod_params
.ant_coupling
,
2013 MODULE_PARM_DESC(antenna_coupling
,
2014 "specify antenna coupling in dB (defualt: 0 dB)");
2016 module_param_named(bt_ch_inhibition
, iwlagn_mod_params
.bt_ch_announce
,
2018 MODULE_PARM_DESC(bt_ch_inhibition
,
2019 "Enable BT channel inhibition (default: enable)");
2021 module_param_named(plcp_check
, iwlagn_mod_params
.plcp_check
, bool, S_IRUGO
);
2022 MODULE_PARM_DESC(plcp_check
, "Check plcp health (default: 1 [enabled])");
2024 module_param_named(ack_check
, iwlagn_mod_params
.ack_check
, bool, S_IRUGO
);
2025 MODULE_PARM_DESC(ack_check
, "Check ack health (default: 0 [disabled])");
2027 module_param_named(wd_disable
, iwlagn_mod_params
.wd_disable
, int, S_IRUGO
);
2028 MODULE_PARM_DESC(wd_disable
,
2029 "Disable stuck queue watchdog timer 0=system default, "
2030 "1=disable, 2=enable (default: 0)");
2033 * set bt_coex_active to true, uCode will do kill/defer
2034 * every time the priority line is asserted (BT is sending signals on the
2035 * priority line in the PCIx).
2036 * set bt_coex_active to false, uCode will ignore the BT activity and
2037 * perform the normal operation
2039 * User might experience transmit issue on some platform due to WiFi/BT
2040 * co-exist problem. The possible behaviors are:
2041 * Able to scan and finding all the available AP
2042 * Not able to associate with any AP
2043 * On those platforms, WiFi communication can be restored by set
2044 * "bt_coex_active" module parameter to "false"
2046 * default: bt_coex_active = true (BT_COEX_ENABLE)
2048 module_param_named(bt_coex_active
, iwlagn_mod_params
.bt_coex_active
,
2050 MODULE_PARM_DESC(bt_coex_active
, "enable wifi/bt co-exist (default: enable)");
2052 module_param_named(led_mode
, iwlagn_mod_params
.led_mode
, int, S_IRUGO
);
2053 MODULE_PARM_DESC(led_mode
, "0=system default, "
2054 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
2056 module_param_named(power_save
, iwlagn_mod_params
.power_save
,
2058 MODULE_PARM_DESC(power_save
,
2059 "enable WiFi power management (default: disable)");
2061 module_param_named(power_level
, iwlagn_mod_params
.power_level
,
2063 MODULE_PARM_DESC(power_level
,
2064 "default power save level (range from 1 - 5, default: 1)");
2066 module_param_named(auto_agg
, iwlagn_mod_params
.auto_agg
,
2068 MODULE_PARM_DESC(auto_agg
,
2069 "enable agg w/o check traffic load (default: enable)");
2072 * For now, keep using power level 1 instead of automatically
2075 module_param_named(no_sleep_autoadjust
, iwlagn_mod_params
.no_sleep_autoadjust
,
2077 MODULE_PARM_DESC(no_sleep_autoadjust
,
2078 "don't automatically adjust sleep level "
2079 "according to maximum network latency (default: true)");