OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4

[zen-stable.git] / drivers / net / wireless / iwlwifi / iwl-eeprom.c

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/


#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>

#include <net/mac80211.h>

#include "iwl-commands.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-debug.h"
#include "iwl-agn.h"
#include "iwl-eeprom.h"
#include "iwl-io.h"

/************************** EEPROM BANDS ****************************
 *
 * The iwl_eeprom_band definitions below provide the mapping from the
 * EEPROM contents to the specific channel number supported for each
 * band.
 *
 * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
 * The specific geography and calibration information for that channel
 * is contained in the eeprom map itself.
 *
 * During init, we copy the eeprom information and channel map
 * information into priv->channel_info_24/52 and priv->channel_map_24/52
 *
 * channel_map_24/52 provides the index in the channel_info array for a
 * given channel.  We have to have two separate maps as there is channel
 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
 * band_2
 *
 * A value of 0xff stored in the channel_map indicates that the channel
 * is not supported by the hardware at all.
 *
 * A value of 0xfe in the channel_map indicates that the channel is not
 * valid for Tx with the current hardware.  This means that
 * while the system can tune and receive on a given channel, it may not
 * be able to associate or transmit any frames on that
 * channel.  There is no corresponding channel information for that
 * entry.
 *
 *********************************************************************/

/* 2.4 GHz */
const u8 iwl_eeprom_band_1[14] = {
        1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
};

/* 5.2 GHz bands */
static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
        183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
};

static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
        34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
};

static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
        100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
};

static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
        145, 149, 153, 157, 161, 165
};

static const u8 iwl_eeprom_band_6[] = {       /* 2.4 ht40 channel */
        1, 2, 3, 4, 5, 6, 7
};

static const u8 iwl_eeprom_band_7[] = {       /* 5.2 ht40 channel */
        36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};

/******************************************************************************
 *
 * generic NVM functions
 *
******************************************************************************/

/*
 * The device's EEPROM semaphore prevents conflicts between driver and uCode
 * when accessing the EEPROM; each access is a series of pulses to/from the
 * EEPROM chip, not a single event, so even reads could conflict if they
 * weren't arbitrated by the semaphore.
 */
static int iwl_eeprom_acquire_semaphore(struct iwl_bus *bus)
{
        u16 count;
        int ret;

        for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
                /* Request semaphore */
                iwl_set_bit(bus, CSR_HW_IF_CONFIG_REG,
                            CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);

                /* See if we got it */
                ret = iwl_poll_bit(bus, CSR_HW_IF_CONFIG_REG,
                                CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
                                CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
                                EEPROM_SEM_TIMEOUT);
                if (ret >= 0) {
                        IWL_DEBUG_EEPROM(bus,
                                "Acquired semaphore after %d tries.\n",
                                count+1);
                        return ret;
                }
        }

        return ret;
}

static void iwl_eeprom_release_semaphore(struct iwl_bus *bus)
{
        iwl_clear_bit(bus, CSR_HW_IF_CONFIG_REG,
                CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);

}

static int iwl_eeprom_verify_signature(struct iwl_trans *trans)
{
        u32 gp = iwl_read32(bus(trans), CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
        int ret = 0;

        IWL_DEBUG_EEPROM(trans, "EEPROM signature=0x%08x\n", gp);
        switch (gp) {
        case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
                if (trans->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
                        IWL_ERR(trans, "EEPROM with bad signature: 0x%08x\n",
                                gp);
                        ret = -ENOENT;
                }
                break;
        case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
        case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
                if (trans->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) {
                        IWL_ERR(trans, "OTP with bad signature: 0x%08x\n", gp);
                        ret = -ENOENT;
                }
                break;
        case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
        default:
                IWL_ERR(trans, "bad EEPROM/OTP signature, type=%s, "
                        "EEPROM_GP=0x%08x\n",
                        (trans->nvm_device_type == NVM_DEVICE_TYPE_OTP)
                        ? "OTP" : "EEPROM", gp);
                ret = -ENOENT;
                break;
        }
        return ret;
}

u16 iwl_eeprom_query16(const struct iwl_shared *shrd, size_t offset)
{
        if (!shrd->eeprom)
                return 0;
        return (u16)shrd->eeprom[offset] | ((u16)shrd->eeprom[offset + 1] << 8);
}

int iwl_eeprom_check_version(struct iwl_priv *priv)
{
        u16 eeprom_ver;
        u16 calib_ver;

        eeprom_ver = iwl_eeprom_query16(priv->shrd, EEPROM_VERSION);
        calib_ver = iwl_eeprom_calib_version(priv->shrd);

        if (eeprom_ver < cfg(priv)->eeprom_ver ||
            calib_ver < cfg(priv)->eeprom_calib_ver)
                goto err;

        IWL_INFO(priv, "device EEPROM VER=0x%x, CALIB=0x%x\n",
                 eeprom_ver, calib_ver);

        return 0;
err:
        IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x "
                  "CALIB=0x%x < 0x%x\n",
                  eeprom_ver, cfg(priv)->eeprom_ver,
                  calib_ver,  cfg(priv)->eeprom_calib_ver);
        return -EINVAL;

}

int iwl_eeprom_check_sku(struct iwl_priv *priv)
{
        struct iwl_shared *shrd = priv->shrd;
        u16 radio_cfg;

        if (!cfg(priv)->sku) {
                /* not using sku overwrite */
                cfg(priv)->sku = iwl_eeprom_query16(shrd, EEPROM_SKU_CAP);
                if (cfg(priv)->sku & EEPROM_SKU_CAP_11N_ENABLE &&
                    !cfg(priv)->ht_params) {
                        IWL_ERR(priv, "Invalid 11n configuration\n");
                        return -EINVAL;
                }
        }
        if (!cfg(priv)->sku) {
                IWL_ERR(priv, "Invalid device sku\n");
                return -EINVAL;
        }

        IWL_INFO(priv, "Device SKU: 0x%X\n", cfg(priv)->sku);

        if (!cfg(priv)->valid_tx_ant && !cfg(priv)->valid_rx_ant) {
                /* not using .cfg overwrite */
                radio_cfg = iwl_eeprom_query16(shrd, EEPROM_RADIO_CONFIG);
                cfg(priv)->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
                cfg(priv)->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg);
                if (!cfg(priv)->valid_tx_ant || !cfg(priv)->valid_rx_ant) {
                        IWL_ERR(priv, "Invalid chain (0x%X, 0x%X)\n",
                                cfg(priv)->valid_tx_ant,
                                cfg(priv)->valid_rx_ant);
                        return -EINVAL;
                }
                IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n",
                         cfg(priv)->valid_tx_ant, cfg(priv)->valid_rx_ant);
        }
        /*
         * for some special cases,
         * EEPROM did not reflect the correct antenna setting
         * so overwrite the valid tx/rx antenna from .cfg
         */
        return 0;
}

void iwl_eeprom_get_mac(const struct iwl_shared *shrd, u8 *mac)
{
        const u8 *addr = iwl_eeprom_query_addr(shrd,
                                        EEPROM_MAC_ADDRESS);
        memcpy(mac, addr, ETH_ALEN);
}

/******************************************************************************
 *
 * OTP related functions
 *
******************************************************************************/

static void iwl_set_otp_access(struct iwl_bus *bus, enum iwl_access_mode mode)
{
        iwl_read32(bus, CSR_OTP_GP_REG);

        if (mode == IWL_OTP_ACCESS_ABSOLUTE)
                iwl_clear_bit(bus, CSR_OTP_GP_REG,
                              CSR_OTP_GP_REG_OTP_ACCESS_MODE);
        else
                iwl_set_bit(bus, CSR_OTP_GP_REG,
                            CSR_OTP_GP_REG_OTP_ACCESS_MODE);
}

static int iwl_get_nvm_type(struct iwl_bus *bus, u32 hw_rev)
{
        u32 otpgp;
        int nvm_type;

        /* OTP only valid for CP/PP and after */
        switch (hw_rev & CSR_HW_REV_TYPE_MSK) {
        case CSR_HW_REV_TYPE_NONE:
                IWL_ERR(bus, "Unknown hardware type\n");
                return -ENOENT;
        case CSR_HW_REV_TYPE_5300:
        case CSR_HW_REV_TYPE_5350:
        case CSR_HW_REV_TYPE_5100:
        case CSR_HW_REV_TYPE_5150:
                nvm_type = NVM_DEVICE_TYPE_EEPROM;
                break;
        default:
                otpgp = iwl_read32(bus, CSR_OTP_GP_REG);
                if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
                        nvm_type = NVM_DEVICE_TYPE_OTP;
                else
                        nvm_type = NVM_DEVICE_TYPE_EEPROM;
                break;
        }
        return  nvm_type;
}

static int iwl_init_otp_access(struct iwl_bus *bus)
{
        int ret;

        /* Enable 40MHz radio clock */
        iwl_write32(bus, CSR_GP_CNTRL,
                    iwl_read32(bus, CSR_GP_CNTRL) |
                    CSR_GP_CNTRL_REG_FLAG_INIT_DONE);

        /* wait for clock to be ready */
        ret = iwl_poll_bit(bus, CSR_GP_CNTRL,
                                 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
                                 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
                                 25000);
        if (ret < 0)
                IWL_ERR(bus, "Time out access OTP\n");
        else {
                iwl_set_bits_prph(bus, APMG_PS_CTRL_REG,
                                  APMG_PS_CTRL_VAL_RESET_REQ);
                udelay(5);
                iwl_clear_bits_prph(bus, APMG_PS_CTRL_REG,
                                    APMG_PS_CTRL_VAL_RESET_REQ);

                /*
                 * CSR auto clock gate disable bit -
                 * this is only applicable for HW with OTP shadow RAM
                 */
                if (cfg(bus)->base_params->shadow_ram_support)
                        iwl_set_bit(bus, CSR_DBG_LINK_PWR_MGMT_REG,
                                CSR_RESET_LINK_PWR_MGMT_DISABLED);
        }
        return ret;
}

static int iwl_read_otp_word(struct iwl_bus *bus, u16 addr, __le16 *eeprom_data)
{
        int ret = 0;
        u32 r;
        u32 otpgp;

        iwl_write32(bus, CSR_EEPROM_REG,
                    CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
        ret = iwl_poll_bit(bus, CSR_EEPROM_REG,
                                 CSR_EEPROM_REG_READ_VALID_MSK,
                                 CSR_EEPROM_REG_READ_VALID_MSK,
                                 IWL_EEPROM_ACCESS_TIMEOUT);
        if (ret < 0) {
                IWL_ERR(bus, "Time out reading OTP[%d]\n", addr);
                return ret;
        }
        r = iwl_read32(bus, CSR_EEPROM_REG);
        /* check for ECC errors: */
        otpgp = iwl_read32(bus, CSR_OTP_GP_REG);
        if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
                /* stop in this case */
                /* set the uncorrectable OTP ECC bit for acknowledgement */
                iwl_set_bit(bus, CSR_OTP_GP_REG,
                        CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
                IWL_ERR(bus, "Uncorrectable OTP ECC error, abort OTP read\n");
                return -EINVAL;
        }
        if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
                /* continue in this case */
                /* set the correctable OTP ECC bit for acknowledgement */
                iwl_set_bit(bus, CSR_OTP_GP_REG,
                                CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
                IWL_ERR(bus, "Correctable OTP ECC error, continue read\n");
        }
        *eeprom_data = cpu_to_le16(r >> 16);
        return 0;
}

/*
 * iwl_is_otp_empty: check for empty OTP
 */
static bool iwl_is_otp_empty(struct iwl_bus *bus)
{
        u16 next_link_addr = 0;
        __le16 link_value;
        bool is_empty = false;

        /* locate the beginning of OTP link list */
        if (!iwl_read_otp_word(bus, next_link_addr, &link_value)) {
                if (!link_value) {
                        IWL_ERR(bus, "OTP is empty\n");
                        is_empty = true;
                }
        } else {
                IWL_ERR(bus, "Unable to read first block of OTP list.\n");
                is_empty = true;
        }

        return is_empty;
}


/*
 * iwl_find_otp_image: find EEPROM image in OTP
 *   finding the OTP block that contains the EEPROM image.
 *   the last valid block on the link list (the block _before_ the last block)
 *   is the block we should read and used to configure the device.
 *   If all the available OTP blocks are full, the last block will be the block
 *   we should read and used to configure the device.
 *   only perform this operation if shadow RAM is disabled
 */
static int iwl_find_otp_image(struct iwl_bus *bus,
                                        u16 *validblockaddr)
{
        u16 next_link_addr = 0, valid_addr;
        __le16 link_value = 0;
        int usedblocks = 0;

        /* set addressing mode to absolute to traverse the link list */
        iwl_set_otp_access(bus, IWL_OTP_ACCESS_ABSOLUTE);

        /* checking for empty OTP or error */
        if (iwl_is_otp_empty(bus))
                return -EINVAL;

        /*
         * start traverse link list
         * until reach the max number of OTP blocks
         * different devices have different number of OTP blocks
         */
        do {
                /* save current valid block address
                 * check for more block on the link list
                 */
                valid_addr = next_link_addr;
                next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
                IWL_DEBUG_EEPROM(bus, "OTP blocks %d addr 0x%x\n",
                               usedblocks, next_link_addr);
                if (iwl_read_otp_word(bus, next_link_addr, &link_value))
                        return -EINVAL;
                if (!link_value) {
                        /*
                         * reach the end of link list, return success and
                         * set address point to the starting address
                         * of the image
                         */
                        *validblockaddr = valid_addr;
                        /* skip first 2 bytes (link list pointer) */
                        *validblockaddr += 2;
                        return 0;
                }
                /* more in the link list, continue */
                usedblocks++;
        } while (usedblocks <= cfg(bus)->base_params->max_ll_items);

        /* OTP has no valid blocks */
        IWL_DEBUG_EEPROM(bus, "OTP has no valid blocks\n");
        return -EINVAL;
}

/******************************************************************************
 *
 * Tx Power related functions
 *
******************************************************************************/
/**
 * iwl_get_max_txpower_avg - get the highest tx power from all chains.
 *     find the highest tx power from all chains for the channel
 */
static s8 iwl_get_max_txpower_avg(struct iwl_cfg *cfg,
                struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
                int element, s8 *max_txpower_in_half_dbm)
{
        s8 max_txpower_avg = 0; /* (dBm) */

        /* Take the highest tx power from any valid chains */
        if ((cfg->valid_tx_ant & ANT_A) &&
            (enhanced_txpower[element].chain_a_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].chain_a_max;
        if ((cfg->valid_tx_ant & ANT_B) &&
            (enhanced_txpower[element].chain_b_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].chain_b_max;
        if ((cfg->valid_tx_ant & ANT_C) &&
            (enhanced_txpower[element].chain_c_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].chain_c_max;
        if (((cfg->valid_tx_ant == ANT_AB) |
            (cfg->valid_tx_ant == ANT_BC) |
            (cfg->valid_tx_ant == ANT_AC)) &&
            (enhanced_txpower[element].mimo2_max > max_txpower_avg))
                max_txpower_avg =  enhanced_txpower[element].mimo2_max;
        if ((cfg->valid_tx_ant == ANT_ABC) &&
            (enhanced_txpower[element].mimo3_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].mimo3_max;

        /*
         * max. tx power in EEPROM is in 1/2 dBm format
         * convert from 1/2 dBm to dBm (round-up convert)
         * but we also do not want to loss 1/2 dBm resolution which
         * will impact performance
         */
        *max_txpower_in_half_dbm = max_txpower_avg;
        return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
}

static void
iwl_eeprom_enh_txp_read_element(struct iwl_priv *priv,
                                    struct iwl_eeprom_enhanced_txpwr *txp,
                                    s8 max_txpower_avg)
{
        int ch_idx;
        bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ;
        enum ieee80211_band band;

        band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
                IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;

        for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) {
                struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx];

                /* update matching channel or from common data only */
                if (txp->channel != 0 && ch_info->channel != txp->channel)
                        continue;

                /* update matching band only */
                if (band != ch_info->band)
                        continue;

                if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) {
                        ch_info->max_power_avg = max_txpower_avg;
                        ch_info->curr_txpow = max_txpower_avg;
                        ch_info->scan_power = max_txpower_avg;
                }

                if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg)
                        ch_info->ht40_max_power_avg = max_txpower_avg;
        }
}

#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)

#define TXP_CHECK_AND_PRINT(x) ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) \
                            ? # x " " : "")

void iwl_eeprom_enhanced_txpower(struct iwl_priv *priv)
{
        struct iwl_shared *shrd = priv->shrd;
        struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
        int idx, entries;
        __le16 *txp_len;
        s8 max_txp_avg, max_txp_avg_halfdbm;

        BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);

        /* the length is in 16-bit words, but we want entries */
        txp_len = (__le16 *) iwl_eeprom_query_addr(shrd, EEPROM_TXP_SZ_OFFS);
        entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;

        txp_array = (void *) iwl_eeprom_query_addr(shrd, EEPROM_TXP_OFFS);

        for (idx = 0; idx < entries; idx++) {
                txp = &txp_array[idx];
                /* skip invalid entries */
                if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
                        continue;

                IWL_DEBUG_EEPROM(priv, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
                                 (txp->channel && (txp->flags &
                                        IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
                                        "Common " : (txp->channel) ?
                                        "Channel" : "Common",
                                 (txp->channel),
                                 TXP_CHECK_AND_PRINT(VALID),
                                 TXP_CHECK_AND_PRINT(BAND_52G),
                                 TXP_CHECK_AND_PRINT(OFDM),
                                 TXP_CHECK_AND_PRINT(40MHZ),
                                 TXP_CHECK_AND_PRINT(HT_AP),
                                 TXP_CHECK_AND_PRINT(RES1),
                                 TXP_CHECK_AND_PRINT(RES2),
                                 TXP_CHECK_AND_PRINT(COMMON_TYPE),
                                 txp->flags);
                IWL_DEBUG_EEPROM(priv, "\t\t chain_A: 0x%02x "
                                 "chain_B: 0X%02x chain_C: 0X%02x\n",
                                 txp->chain_a_max, txp->chain_b_max,
                                 txp->chain_c_max);
                IWL_DEBUG_EEPROM(priv, "\t\t MIMO2: 0x%02x "
                                 "MIMO3: 0x%02x High 20_on_40: 0x%02x "
                                 "Low 20_on_40: 0x%02x\n",
                                 txp->mimo2_max, txp->mimo3_max,
                                 ((txp->delta_20_in_40 & 0xf0) >> 4),
                                 (txp->delta_20_in_40 & 0x0f));

                max_txp_avg = iwl_get_max_txpower_avg(cfg(priv), txp_array, idx,
                                                      &max_txp_avg_halfdbm);

                /*
                 * Update the user limit values values to the highest
                 * power supported by any channel
                 */
                if (max_txp_avg > priv->tx_power_user_lmt)
                        priv->tx_power_user_lmt = max_txp_avg;
                if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm)
                        priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm;

                iwl_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
        }
}

/**
 * iwl_eeprom_init - read EEPROM contents
 *
 * Load the EEPROM contents from adapter into shrd->eeprom
 *
 * NOTE:  This routine uses the non-debug IO access functions.
 */
int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev)
{
        struct iwl_shared *shrd = priv->shrd;
        __le16 *e;
        u32 gp = iwl_read32(bus(priv), CSR_EEPROM_GP);
        int sz;
        int ret;
        u16 addr;
        u16 validblockaddr = 0;
        u16 cache_addr = 0;

        trans(priv)->nvm_device_type = iwl_get_nvm_type(bus(priv), hw_rev);
        if (trans(priv)->nvm_device_type == -ENOENT)
                return -ENOENT;
        /* allocate eeprom */
        sz = cfg(priv)->base_params->eeprom_size;
        IWL_DEBUG_EEPROM(priv, "NVM size = %d\n", sz);
        shrd->eeprom = kzalloc(sz, GFP_KERNEL);
        if (!shrd->eeprom) {
                ret = -ENOMEM;
                goto alloc_err;
        }
        e = (__le16 *)shrd->eeprom;

        iwl_apm_init(priv);

        ret = iwl_eeprom_verify_signature(trans(priv));
        if (ret < 0) {
                IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
                ret = -ENOENT;
                goto err;
        }

        /* Make sure driver (instead of uCode) is allowed to read EEPROM */
        ret = iwl_eeprom_acquire_semaphore(bus(priv));
        if (ret < 0) {
                IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n");
                ret = -ENOENT;
                goto err;
        }

        if (trans(priv)->nvm_device_type == NVM_DEVICE_TYPE_OTP) {

                ret = iwl_init_otp_access(bus(priv));
                if (ret) {
                        IWL_ERR(priv, "Failed to initialize OTP access.\n");
                        ret = -ENOENT;
                        goto done;
                }
                iwl_write32(bus(priv), CSR_EEPROM_GP,
                            iwl_read32(bus(priv), CSR_EEPROM_GP) &
                            ~CSR_EEPROM_GP_IF_OWNER_MSK);

                iwl_set_bit(bus(priv), CSR_OTP_GP_REG,
                             CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
                             CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
                /* traversing the linked list if no shadow ram supported */
                if (!cfg(priv)->base_params->shadow_ram_support) {
                        if (iwl_find_otp_image(bus(priv), &validblockaddr)) {
                                ret = -ENOENT;
                                goto done;
                        }
                }
                for (addr = validblockaddr; addr < validblockaddr + sz;
                     addr += sizeof(u16)) {
                        __le16 eeprom_data;

                        ret = iwl_read_otp_word(bus(priv), addr, &eeprom_data);
                        if (ret)
                                goto done;
                        e[cache_addr / 2] = eeprom_data;
                        cache_addr += sizeof(u16);
                }
        } else {
                /* eeprom is an array of 16bit values */
                for (addr = 0; addr < sz; addr += sizeof(u16)) {
                        u32 r;

                        iwl_write32(bus(priv), CSR_EEPROM_REG,
                                    CSR_EEPROM_REG_MSK_ADDR & (addr << 1));

                        ret = iwl_poll_bit(bus(priv), CSR_EEPROM_REG,
                                                  CSR_EEPROM_REG_READ_VALID_MSK,
                                                  CSR_EEPROM_REG_READ_VALID_MSK,
                                                  IWL_EEPROM_ACCESS_TIMEOUT);
                        if (ret < 0) {
                                IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
                                goto done;
                        }
                        r = iwl_read32(bus(priv), CSR_EEPROM_REG);
                        e[addr / 2] = cpu_to_le16(r >> 16);
                }
        }

        IWL_DEBUG_EEPROM(priv, "NVM Type: %s, version: 0x%x\n",
                       (trans(priv)->nvm_device_type == NVM_DEVICE_TYPE_OTP)
                       ? "OTP" : "EEPROM",
                       iwl_eeprom_query16(shrd, EEPROM_VERSION));

        ret = 0;
done:
        iwl_eeprom_release_semaphore(bus(priv));

err:
        if (ret)
                iwl_eeprom_free(priv->shrd);
        /* Reset chip to save power until we load uCode during "up". */
        iwl_apm_stop(priv);
alloc_err:
        return ret;
}

void iwl_eeprom_free(struct iwl_shared *shrd)
{
        kfree(shrd->eeprom);
        shrd->eeprom = NULL;
}

static void iwl_init_band_reference(const struct iwl_priv *priv,
                        int eep_band, int *eeprom_ch_count,
                        const struct iwl_eeprom_channel **eeprom_ch_info,
                        const u8 **eeprom_ch_index)
{
        struct iwl_shared *shrd = priv->shrd;
        u32 offset = cfg(priv)->lib->
                        eeprom_ops.regulatory_bands[eep_band - 1];
        switch (eep_band) {
        case 1:         /* 2.4GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_1;
                break;
        case 2:         /* 4.9GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_2;
                break;
        case 3:         /* 5.2GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_3;
                break;
        case 4:         /* 5.5GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_4;
                break;
        case 5:         /* 5.7GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_5;
                break;
        case 6:         /* 2.4GHz ht40 channels */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_6;
                break;
        case 7:         /* 5 GHz ht40 channels */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(shrd, offset);
                *eeprom_ch_index = iwl_eeprom_band_7;
                break;
        default:
                BUG();
                return;
        }
}

#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
                            ? # x " " : "")
/**
 * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv.
 *
 * Does not set up a command, or touch hardware.
 */
static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
                              enum ieee80211_band band, u16 channel,
                              const struct iwl_eeprom_channel *eeprom_ch,
                              u8 clear_ht40_extension_channel)
{
        struct iwl_channel_info *ch_info;

        ch_info = (struct iwl_channel_info *)
                        iwl_get_channel_info(priv, band, channel);

        if (!is_channel_valid(ch_info))
                return -1;

        IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
                        " Ad-Hoc %ssupported\n",
                        ch_info->channel,
                        is_channel_a_band(ch_info) ?
                        "5.2" : "2.4",
                        CHECK_AND_PRINT(IBSS),
                        CHECK_AND_PRINT(ACTIVE),
                        CHECK_AND_PRINT(RADAR),
                        CHECK_AND_PRINT(WIDE),
                        CHECK_AND_PRINT(DFS),
                        eeprom_ch->flags,
                        eeprom_ch->max_power_avg,
                        ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
                         && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
                        "" : "not ");

        ch_info->ht40_eeprom = *eeprom_ch;
        ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
        ch_info->ht40_flags = eeprom_ch->flags;
        if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
                ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;

        return 0;
}

#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
                            ? # x " " : "")

/**
 * iwl_init_channel_map - Set up driver's info for all possible channels
 */
int iwl_init_channel_map(struct iwl_priv *priv)
{
        int eeprom_ch_count = 0;
        const u8 *eeprom_ch_index = NULL;
        const struct iwl_eeprom_channel *eeprom_ch_info = NULL;
        int band, ch;
        struct iwl_channel_info *ch_info;

        if (priv->channel_count) {
                IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n");
                return 0;
        }

        IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n");

        priv->channel_count =
            ARRAY_SIZE(iwl_eeprom_band_1) +
            ARRAY_SIZE(iwl_eeprom_band_2) +
            ARRAY_SIZE(iwl_eeprom_band_3) +
            ARRAY_SIZE(iwl_eeprom_band_4) +
            ARRAY_SIZE(iwl_eeprom_band_5);

        IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n",
                        priv->channel_count);

        priv->channel_info = kcalloc(priv->channel_count,
                                     sizeof(struct iwl_channel_info),
                                     GFP_KERNEL);
        if (!priv->channel_info) {
                IWL_ERR(priv, "Could not allocate channel_info\n");
                priv->channel_count = 0;
                return -ENOMEM;
        }

        ch_info = priv->channel_info;

        /* Loop through the 5 EEPROM bands adding them in order to the
         * channel map we maintain (that contains additional information than
         * what just in the EEPROM) */
        for (band = 1; band <= 5; band++) {

                iwl_init_band_reference(priv, band, &eeprom_ch_count,
                                        &eeprom_ch_info, &eeprom_ch_index);

                /* Loop through each band adding each of the channels */
                for (ch = 0; ch < eeprom_ch_count; ch++) {
                        ch_info->channel = eeprom_ch_index[ch];
                        ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
                            IEEE80211_BAND_5GHZ;

                        /* permanently store EEPROM's channel regulatory flags
                         *   and max power in channel info database. */
                        ch_info->eeprom = eeprom_ch_info[ch];

                        /* Copy the run-time flags so they are there even on
                         * invalid channels */
                        ch_info->flags = eeprom_ch_info[ch].flags;
                        /* First write that ht40 is not enabled, and then enable
                         * one by one */
                        ch_info->ht40_extension_channel =
                                        IEEE80211_CHAN_NO_HT40;

                        if (!(is_channel_valid(ch_info))) {
                                IWL_DEBUG_EEPROM(priv,
                                               "Ch. %d Flags %x [%sGHz] - "
                                               "No traffic\n",
                                               ch_info->channel,
                                               ch_info->flags,
                                               is_channel_a_band(ch_info) ?
                                               "5.2" : "2.4");
                                ch_info++;
                                continue;
                        }

                        /* Initialize regulatory-based run-time data */
                        ch_info->max_power_avg = ch_info->curr_txpow =
                            eeprom_ch_info[ch].max_power_avg;
                        ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
                        ch_info->min_power = 0;

                        IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] "
                                       "%s%s%s%s%s%s(0x%02x %ddBm):"
                                       " Ad-Hoc %ssupported\n",
                                       ch_info->channel,
                                       is_channel_a_band(ch_info) ?
                                       "5.2" : "2.4",
                                       CHECK_AND_PRINT_I(VALID),
                                       CHECK_AND_PRINT_I(IBSS),
                                       CHECK_AND_PRINT_I(ACTIVE),
                                       CHECK_AND_PRINT_I(RADAR),
                                       CHECK_AND_PRINT_I(WIDE),
                                       CHECK_AND_PRINT_I(DFS),
                                       eeprom_ch_info[ch].flags,
                                       eeprom_ch_info[ch].max_power_avg,
                                       ((eeprom_ch_info[ch].
                                         flags & EEPROM_CHANNEL_IBSS)
                                        && !(eeprom_ch_info[ch].
                                             flags & EEPROM_CHANNEL_RADAR))
                                       ? "" : "not ");

                        ch_info++;
                }
        }

        /* Check if we do have HT40 channels */
        if (cfg(priv)->lib->eeprom_ops.regulatory_bands[5] ==
            EEPROM_REGULATORY_BAND_NO_HT40 &&
            cfg(priv)->lib->eeprom_ops.regulatory_bands[6] ==
            EEPROM_REGULATORY_BAND_NO_HT40)
                return 0;

        /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
        for (band = 6; band <= 7; band++) {
                enum ieee80211_band ieeeband;

                iwl_init_band_reference(priv, band, &eeprom_ch_count,
                                        &eeprom_ch_info, &eeprom_ch_index);

                /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
                ieeeband =
                        (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;

                /* Loop through each band adding each of the channels */
                for (ch = 0; ch < eeprom_ch_count; ch++) {
                        /* Set up driver's info for lower half */
                        iwl_mod_ht40_chan_info(priv, ieeeband,
                                                eeprom_ch_index[ch],
                                                &eeprom_ch_info[ch],
                                                IEEE80211_CHAN_NO_HT40PLUS);

                        /* Set up driver's info for upper half */
                        iwl_mod_ht40_chan_info(priv, ieeeband,
                                                eeprom_ch_index[ch] + 4,
                                                &eeprom_ch_info[ch],
                                                IEEE80211_CHAN_NO_HT40MINUS);
                }
        }

        /* for newer device (6000 series and up)
         * EEPROM contain enhanced tx power information
         * driver need to process addition information
         * to determine the max channel tx power limits
         */
        if (cfg(priv)->lib->eeprom_ops.update_enhanced_txpower)
                cfg(priv)->lib->eeprom_ops.update_enhanced_txpower(priv);

        return 0;
}

/*
 * iwl_free_channel_map - undo allocations in iwl_init_channel_map
 */
void iwl_free_channel_map(struct iwl_priv *priv)
{
        kfree(priv->channel_info);
        priv->channel_count = 0;
}

/**
 * iwl_get_channel_info - Find driver's private channel info
 *
 * Based on band and channel number.
 */
const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
                                        enum ieee80211_band band, u16 channel)
{
        int i;

        switch (band) {
        case IEEE80211_BAND_5GHZ:
                for (i = 14; i < priv->channel_count; i++) {
                        if (priv->channel_info[i].channel == channel)
                                return &priv->channel_info[i];
                }
                break;
        case IEEE80211_BAND_2GHZ:
                if (channel >= 1 && channel <= 14)
                        return &priv->channel_info[channel - 1];
                break;
        default:
                BUG();
        }

        return NULL;
}

void iwl_rf_config(struct iwl_priv *priv)
{
        u16 radio_cfg;

        radio_cfg = iwl_eeprom_query16(priv->shrd, EEPROM_RADIO_CONFIG);

        /* write radio config values to register */
        if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
                iwl_set_bit(bus(priv), CSR_HW_IF_CONFIG_REG,
                            EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
                            EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
                            EEPROM_RF_CFG_DASH_MSK(radio_cfg));
                IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
                         EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
                         EEPROM_RF_CFG_STEP_MSK(radio_cfg),
                         EEPROM_RF_CFG_DASH_MSK(radio_cfg));
        } else
                WARN_ON(1);

        /* set CSR_HW_CONFIG_REG for uCode use */
        iwl_set_bit(bus(priv), CSR_HW_IF_CONFIG_REG,
                    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
                    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
}