drivers/net/wireless/rtlwifi/debug.h

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2009-2010  Realtek Corporation.
   4  *
   5  * Tmis program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * Tmis program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * tmis program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * Tme full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * wlanfae <wlanfae@realtek.com>
  23  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  24  * Hsinchu 300, Taiwan.
  25  *
  26  * Larry Finger <Larry.Finger@lwfinger.net>
  27  *****************************************************************************/
  28
  29 #ifndef __RTL_DEBUG_H__
  30 #define __RTL_DEBUG_H__
  31
  32 /*--------------------------------------------------------------
  33                         Debug level
  34 --------------------------------------------------------------*/
  35 /*
  36  *Fatal bug.
  37  *For example, Tx/Rx/IO locked up,
  38  *memory access violation,
  39  *resource allocation failed,
  40  *unexpected HW behavior, HW BUG
  41  *and so on.
  42  */
  43 #define DBG_EMERG                       0
  44
  45 /*
  46  *Abnormal, rare, or unexpeted cases.
  47  *For example, Packet/IO Ctl canceled,
  48  *device suprisely unremoved and so on.
  49  */
  50 #define DBG_WARNING                     2
  51
  52 /*
  53  *Normal case driver developer should
  54  *open, we can see link status like
  55  *assoc/AddBA/DHCP/adapter start and
  56  *so on basic and useful infromations.
  57  */
  58 #define DBG_DMESG                       3
  59
  60 /*
  61  *Normal case with useful information
  62  *about current SW or HW state.
  63  *For example, Tx/Rx descriptor to fill,
  64  *Tx/Rx descriptor completed status,
  65  *SW protocol state change, dynamic
  66  *mechanism state change and so on.
  67  */
  68 #define DBG_LOUD                        4
  69
  70 /*
  71  *Normal case with detail execution
  72  *flow or information.
  73  */
  74 #define DBG_TRACE                       5
  75
  76 /*--------------------------------------------------------------
  77                 Define the rt_trace components
  78 --------------------------------------------------------------*/
  79 #define COMP_ERR                        BIT(0)
  80 #define COMP_FW                         BIT(1)
  81 #define COMP_INIT                       BIT(2)  /*For init/deinit */
  82 #define COMP_RECV                       BIT(3)  /*For Rx. */
  83 #define COMP_SEND                       BIT(4)  /*For Tx. */
  84 #define COMP_MLME                       BIT(5)  /*For MLME. */
  85 #define COMP_SCAN                       BIT(6)  /*For Scan. */
  86 #define COMP_INTR                       BIT(7)  /*For interrupt Related. */
  87 #define COMP_LED                        BIT(8)  /*For LED. */
  88 #define COMP_SEC                        BIT(9)  /*For sec. */
  89 #define COMP_BEACON                     BIT(10) /*For beacon. */
  90 #define COMP_RATE                       BIT(11) /*For rate. */
  91 #define COMP_RXDESC                     BIT(12) /*For rx desc. */
  92 #define COMP_DIG                        BIT(13) /*For DIG */
  93 #define COMP_TXAGC                      BIT(14) /*For Tx power */
  94 #define COMP_HIPWR                      BIT(15) /*For High Power Mechanism */
  95 #define COMP_POWER                      BIT(16) /*For lps/ips/aspm. */
  96 #define COMP_POWER_TRACKING     BIT(17) /*For TX POWER TRACKING */
  97 #define COMP_BB_POWERSAVING     BIT(18)
  98 #define COMP_SWAS                       BIT(19) /*For SW Antenna Switch */
  99 #define COMP_RF                         BIT(20) /*For RF. */
 100 #define COMP_TURBO                      BIT(21) /*For EDCA TURBO. */
 101 #define COMP_RATR                       BIT(22)
 102 #define COMP_CMD                        BIT(23)
 103 #define COMP_EFUSE                      BIT(24)
 104 #define COMP_QOS                        BIT(25)
 105 #define COMP_MAC80211           BIT(26)
 106 #define COMP_REGD                       BIT(27)
 107 #define COMP_CHAN                       BIT(28)
 108 #define COMP_USB                        BIT(29)
 109
 110 /*--------------------------------------------------------------
 111                 Define the rt_print components
 112 --------------------------------------------------------------*/
 113 /* Define EEPROM and EFUSE  check module bit*/
 114 #define EEPROM_W                        BIT(0)
 115 #define EFUSE_PG                        BIT(1)
 116 #define EFUSE_READ_ALL          BIT(2)
 117
 118 /* Define init check for module bit*/
 119 #define INIT_EEPROM                     BIT(0)
 120 #define INIT_TxPower            BIT(1)
 121 #define INIT_IQK                        BIT(2)
 122 #define INIT_RF                         BIT(3)
 123
 124 /* Define PHY-BB/RF/MAC check module bit */
 125 #define PHY_BBR                         BIT(0)
 126 #define PHY_BBW                         BIT(1)
 127 #define PHY_RFR                         BIT(2)
 128 #define PHY_RFW                         BIT(3)
 129 #define PHY_MACR                        BIT(4)
 130 #define PHY_MACW                        BIT(5)
 131 #define PHY_ALLR                        BIT(6)
 132 #define PHY_ALLW                        BIT(7)
 133 #define PHY_TXPWR                       BIT(8)
 134 #define PHY_PWRDIFF                     BIT(9)
 135
 136 enum dbgp_flag_e {
 137         FQOS = 0,
 138         FTX = 1,
 139         FRX = 2,
 140         FSEC = 3,
 141         FMGNT = 4,
 142         FMLME = 5,
 143         FRESOURCE = 6,
 144         FBEACON = 7,
 145         FISR = 8,
 146         FPHY = 9,
 147         FMP = 10,
 148         FEEPROM = 11,
 149         FPWR = 12,
 150         FDM = 13,
 151         FDBGCtrl = 14,
 152         FC2H = 15,
 153         FBT = 16,
 154         FINIT = 17,
 155         FIOCTL = 18,
 156         DBGP_TYPE_MAX
 157 };
 158
 159 #define RT_ASSERT(_exp, fmt)                            \
 160         do {                                            \
 161                 if (!(_exp)) {                  \
 162                         printk(KERN_DEBUG "%s:%s(): ", KBUILD_MODNAME, \
 163                         __func__);                      \
 164                         printk fmt;                     \
 165                 } \
 166         } while (0);
 167
 168 #define RT_TRACE(rtlpriv, comp, level, fmt)\
 169         do { \
 170                 if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \
 171                         ((level) <= rtlpriv->dbg.global_debuglevel))) {\
 172                         printk(KERN_DEBUG "%s:%s():<%lx-%x> ", KBUILD_MODNAME, \
 173                         __func__, in_interrupt(), in_atomic()); \
 174                         printk fmt;                             \
 175                 } \
 176         } while (0);
 177
 178 #define RTPRINT(rtlpriv, dbgtype, dbgflag, printstr)    \
 179         do {                                            \
 180                 if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \
 181                         printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);      \
 182                         printk printstr;                \
 183                 }                                       \
 184         } while (0);
 185
 186 #define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \
 187                 _hexdatalen) \
 188         do {\
 189                 if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) &&\
 190                         (_level <= rtlpriv->dbg.global_debuglevel)))    { \
 191                         int __i;                                        \
 192                         u8*     ptr = (u8 *)_hexdata;                   \
 193                         printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);      \
 194                         printk("In process \"%s\" (pid %i):", current->comm,\
 195                                         current->pid); \
 196                         printk(_titlestring);           \
 197                         for (__i = 0; __i < (int)_hexdatalen; __i++) {  \
 198                                 printk("%02X%s", ptr[__i], (((__i + 1) % 4)\
 199                                                         == 0) ? "  " : " ");\
 200                                 if (((__i + 1) % 16) == 0)              \
 201                                         printk("\n");                   \
 202                         }                               \
 203                         printk(KERN_DEBUG "\n");                        \
 204                 } \
 205         } while (0);
 206
 207 void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
 208 #endif