?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4
[zen-stable.git] / drivers / scsi / megaraid / megaraid_mbox.c
blob35bd13879fed613de539b0719e2191da7956cedd
1 /*
2 *
3 * Linux MegaRAID device driver
4 *
5 * Copyright (c) 2003-2004 LSI Logic Corporation.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 *
12 * FILE : megaraid_mbox.c
13 * Version : v2.20.5.1 (Nov 16 2006)
14 *
15 * Authors:
16 * Atul Mukker <Atul.Mukker@lsi.com>
17 * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com>
18 * Manoj Jose <Manoj.Jose@lsi.com>
19 * Seokmann Ju
20 *
21 * List of supported controllers
22 *
23 * OEM Product Name VID DID SSVID SSID
24 * --- ------------ --- --- ---- ----
25 * Dell PERC3/QC 101E 1960 1028 0471
26 * Dell PERC3/DC 101E 1960 1028 0493
27 * Dell PERC3/SC 101E 1960 1028 0475
28 * Dell PERC3/Di 1028 1960 1028 0123
29 * Dell PERC4/SC 1000 1960 1028 0520
30 * Dell PERC4/DC 1000 1960 1028 0518
31 * Dell PERC4/QC 1000 0407 1028 0531
32 * Dell PERC4/Di 1028 000F 1028 014A
33 * Dell PERC 4e/Si 1028 0013 1028 016c
34 * Dell PERC 4e/Di 1028 0013 1028 016d
35 * Dell PERC 4e/Di 1028 0013 1028 016e
36 * Dell PERC 4e/Di 1028 0013 1028 016f
37 * Dell PERC 4e/Di 1028 0013 1028 0170
38 * Dell PERC 4e/DC 1000 0408 1028 0002
39 * Dell PERC 4e/SC 1000 0408 1028 0001
40 *
41 *
42 * LSI MegaRAID SCSI 320-0 1000 1960 1000 A520
43 * LSI MegaRAID SCSI 320-1 1000 1960 1000 0520
44 * LSI MegaRAID SCSI 320-2 1000 1960 1000 0518
45 * LSI MegaRAID SCSI 320-0X 1000 0407 1000 0530
46 * LSI MegaRAID SCSI 320-2X 1000 0407 1000 0532
47 * LSI MegaRAID SCSI 320-4X 1000 0407 1000 0531
48 * LSI MegaRAID SCSI 320-1E 1000 0408 1000 0001
49 * LSI MegaRAID SCSI 320-2E 1000 0408 1000 0002
50 * LSI MegaRAID SATA 150-4 1000 1960 1000 4523
51 * LSI MegaRAID SATA 150-6 1000 1960 1000 0523
52 * LSI MegaRAID SATA 300-4X 1000 0409 1000 3004
53 * LSI MegaRAID SATA 300-8X 1000 0409 1000 3008
54 *
55 * INTEL RAID Controller SRCU42X 1000 0407 8086 0532
56 * INTEL RAID Controller SRCS16 1000 1960 8086 0523
57 * INTEL RAID Controller SRCU42E 1000 0408 8086 0002
58 * INTEL RAID Controller SRCZCRX 1000 0407 8086 0530
59 * INTEL RAID Controller SRCS28X 1000 0409 8086 3008
60 * INTEL RAID Controller SROMBU42E 1000 0408 8086 3431
61 * INTEL RAID Controller SROMBU42E 1000 0408 8086 3499
62 * INTEL RAID Controller SRCU51L 1000 1960 8086 0520
63 *
64 * FSC MegaRAID PCI Express ROMB 1000 0408 1734 1065
65 *
66 * ACER MegaRAID ROMB-2E 1000 0408 1025 004D
67 *
68 * NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287
69 *
70 * For history of changes, see Documentation/scsi/ChangeLog.megaraid
71 */
72
73 #include <linux/slab.h>
74 #include <linux/module.h>
75 #include "megaraid_mbox.h"
76
77 static int megaraid_init(void);
78 static void megaraid_exit(void);
79
80 static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *);
81 static void megaraid_detach_one(struct pci_dev *);
82 static void megaraid_mbox_shutdown(struct pci_dev *);
83
84 static int megaraid_io_attach(adapter_t *);
85 static void megaraid_io_detach(adapter_t *);
86
87 static int megaraid_init_mbox(adapter_t *);
88 static void megaraid_fini_mbox(adapter_t *);
89
90 static int megaraid_alloc_cmd_packets(adapter_t *);
91 static void megaraid_free_cmd_packets(adapter_t *);
92
93 static int megaraid_mbox_setup_dma_pools(adapter_t *);
94 static void megaraid_mbox_teardown_dma_pools(adapter_t *);
95
96 static int megaraid_sysfs_alloc_resources(adapter_t *);
97 static void megaraid_sysfs_free_resources(adapter_t *);
98
99 static int megaraid_abort_handler(struct scsi_cmnd *);
100 static int megaraid_reset_handler(struct scsi_cmnd *);
101
102 static int mbox_post_sync_cmd(adapter_t *, uint8_t []);
103 static int mbox_post_sync_cmd_fast(adapter_t *, uint8_t []);
104 static int megaraid_busywait_mbox(mraid_device_t *);
105 static int megaraid_mbox_product_info(adapter_t *);
106 static int megaraid_mbox_extended_cdb(adapter_t *);
107 static int megaraid_mbox_support_ha(adapter_t *, uint16_t *);
108 static int megaraid_mbox_support_random_del(adapter_t *);
109 static int megaraid_mbox_get_max_sg(adapter_t *);
110 static void megaraid_mbox_enum_raid_scsi(adapter_t *);
111 static void megaraid_mbox_flush_cache(adapter_t *);
112 static int megaraid_mbox_fire_sync_cmd(adapter_t *);
113
114 static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
115 static void megaraid_mbox_setup_device_map(adapter_t *);
116
117 static int megaraid_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
118 static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
119 static void megaraid_mbox_runpendq(adapter_t *, scb_t *);
120 static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *,
121 struct scsi_cmnd *);
122 static void megaraid_mbox_prepare_epthru(adapter_t *, scb_t *,
123 struct scsi_cmnd *);
124
125 static irqreturn_t megaraid_isr(int, void *);
126
127 static void megaraid_mbox_dpc(unsigned long);
128
129 static ssize_t megaraid_sysfs_show_app_hndl(struct device *, struct device_attribute *attr, char *);
130 static ssize_t megaraid_sysfs_show_ldnum(struct device *, struct device_attribute *attr, char *);
131
132 static int megaraid_cmm_register(adapter_t *);
133 static int megaraid_cmm_unregister(adapter_t *);
134 static int megaraid_mbox_mm_handler(unsigned long, uioc_t *, uint32_t);
135 static int megaraid_mbox_mm_command(adapter_t *, uioc_t *);
136 static void megaraid_mbox_mm_done(adapter_t *, scb_t *);
137 static int gather_hbainfo(adapter_t *, mraid_hba_info_t *);
138 static int wait_till_fw_empty(adapter_t *);
139
140
141
142 MODULE_AUTHOR("megaraidlinux@lsi.com");
143 MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
144 MODULE_LICENSE("GPL");
145 MODULE_VERSION(MEGARAID_VERSION);
146
147 /*
148 * ### modules parameters for driver ###
149 */
150
151 /*
152 * Set to enable driver to expose unconfigured disk to kernel
153 */
154 static int megaraid_expose_unconf_disks = 0;
155 module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0);
156 MODULE_PARM_DESC(unconf_disks,
157 "Set to expose unconfigured disks to kernel (default=0)");
158
159 /*
160 * driver wait time if the adapter's mailbox is busy
161 */
162 static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT;
163 module_param_named(busy_wait, max_mbox_busy_wait, int, 0);
164 MODULE_PARM_DESC(busy_wait,
165 "Max wait for mailbox in microseconds if busy (default=10)");
166
167 /*
168 * number of sectors per IO command
169 */
170 static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS;
171 module_param_named(max_sectors, megaraid_max_sectors, int, 0);
172 MODULE_PARM_DESC(max_sectors,
173 "Maximum number of sectors per IO command (default=128)");
174
175 /*
176 * number of commands per logical unit
177 */
178 static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN;
179 module_param_named(cmd_per_lun, megaraid_cmd_per_lun, int, 0);
180 MODULE_PARM_DESC(cmd_per_lun,
181 "Maximum number of commands per logical unit (default=64)");
182
183
184 /*
185 * Fast driver load option, skip scanning for physical devices during load.
186 * This would result in non-disk devices being skipped during driver load
187 * time. These can be later added though, using /proc/scsi/scsi
188 */
189 static unsigned int megaraid_fast_load = 0;
190 module_param_named(fast_load, megaraid_fast_load, int, 0);
191 MODULE_PARM_DESC(fast_load,
192 "Faster loading of the driver, skips physical devices! (default=0)");
193
194
195 /*
196 * mraid_debug level - threshold for amount of information to be displayed by
197 * the driver. This level can be changed through modules parameters, ioctl or
198 * sysfs/proc interface. By default, print the announcement messages only.
199 */
200 int mraid_debug_level = CL_ANN;
201 module_param_named(debug_level, mraid_debug_level, int, 0);
202 MODULE_PARM_DESC(debug_level, "Debug level for driver (default=0)");
203
204 /*
205 * ### global data ###
206 */
207 static uint8_t megaraid_mbox_version[8] =
208 { 0x02, 0x20, 0x04, 0x06, 3, 7, 20, 5 };
209
210
211 /*
212 * PCI table for all supported controllers.
213 */
214 static struct pci_device_id pci_id_table_g[] = {
215 {
216 PCI_VENDOR_ID_DELL,
217 PCI_DEVICE_ID_PERC4_DI_DISCOVERY,
218 PCI_VENDOR_ID_DELL,
219 PCI_SUBSYS_ID_PERC4_DI_DISCOVERY,
220 },
221 {
222 PCI_VENDOR_ID_LSI_LOGIC,
223 PCI_DEVICE_ID_PERC4_SC,
224 PCI_VENDOR_ID_DELL,
225 PCI_SUBSYS_ID_PERC4_SC,
226 },
227 {
228 PCI_VENDOR_ID_LSI_LOGIC,
229 PCI_DEVICE_ID_PERC4_DC,
230 PCI_VENDOR_ID_DELL,
231 PCI_SUBSYS_ID_PERC4_DC,
232 },
233 {
234 PCI_VENDOR_ID_LSI_LOGIC,
235 PCI_DEVICE_ID_VERDE,
236 PCI_ANY_ID,
237 PCI_ANY_ID,
238 },
239 {
240 PCI_VENDOR_ID_DELL,
241 PCI_DEVICE_ID_PERC4_DI_EVERGLADES,
242 PCI_VENDOR_ID_DELL,
243 PCI_SUBSYS_ID_PERC4_DI_EVERGLADES,
244 },
245 {
246 PCI_VENDOR_ID_DELL,
247 PCI_DEVICE_ID_PERC4E_SI_BIGBEND,
248 PCI_VENDOR_ID_DELL,
249 PCI_SUBSYS_ID_PERC4E_SI_BIGBEND,
250 },
251 {
252 PCI_VENDOR_ID_DELL,
253 PCI_DEVICE_ID_PERC4E_DI_KOBUK,
254 PCI_VENDOR_ID_DELL,
255 PCI_SUBSYS_ID_PERC4E_DI_KOBUK,
256 },
257 {
258 PCI_VENDOR_ID_DELL,
259 PCI_DEVICE_ID_PERC4E_DI_CORVETTE,
260 PCI_VENDOR_ID_DELL,
261 PCI_SUBSYS_ID_PERC4E_DI_CORVETTE,
262 },
263 {
264 PCI_VENDOR_ID_DELL,
265 PCI_DEVICE_ID_PERC4E_DI_EXPEDITION,
266 PCI_VENDOR_ID_DELL,
267 PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION,
268 },
269 {
270 PCI_VENDOR_ID_DELL,
271 PCI_DEVICE_ID_PERC4E_DI_GUADALUPE,
272 PCI_VENDOR_ID_DELL,
273 PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE,
274 },
275 {
276 PCI_VENDOR_ID_LSI_LOGIC,
277 PCI_DEVICE_ID_DOBSON,
278 PCI_ANY_ID,
279 PCI_ANY_ID,
280 },
281 {
282 PCI_VENDOR_ID_AMI,
283 PCI_DEVICE_ID_AMI_MEGARAID3,
284 PCI_ANY_ID,
285 PCI_ANY_ID,
286 },
287 {
288 PCI_VENDOR_ID_LSI_LOGIC,
289 PCI_DEVICE_ID_AMI_MEGARAID3,
290 PCI_ANY_ID,
291 PCI_ANY_ID,
292 },
293 {
294 PCI_VENDOR_ID_LSI_LOGIC,
295 PCI_DEVICE_ID_LINDSAY,
296 PCI_ANY_ID,
297 PCI_ANY_ID,
298 },
299 {0} /* Terminating entry */
300 };
301 MODULE_DEVICE_TABLE(pci, pci_id_table_g);
302
303
304 static struct pci_driver megaraid_pci_driver = {
305 .name = "megaraid",
306 .id_table = pci_id_table_g,
307 .probe = megaraid_probe_one,
308 .remove = __devexit_p(megaraid_detach_one),
309 .shutdown = megaraid_mbox_shutdown,
310 };
311
312
313
314 // definitions for the device attributes for exporting logical drive number
315 // for a scsi address (Host, Channel, Id, Lun)
316
317 DEVICE_ATTR(megaraid_mbox_app_hndl, S_IRUSR, megaraid_sysfs_show_app_hndl,
318 NULL);
319
320 // Host template initializer for megaraid mbox sysfs device attributes
321 static struct device_attribute *megaraid_shost_attrs[] = {
322 &dev_attr_megaraid_mbox_app_hndl,
323 NULL,
324 };
325
326
327 DEVICE_ATTR(megaraid_mbox_ld, S_IRUSR, megaraid_sysfs_show_ldnum, NULL);
328
329 // Host template initializer for megaraid mbox sysfs device attributes
330 static struct device_attribute *megaraid_sdev_attrs[] = {
331 &dev_attr_megaraid_mbox_ld,
332 NULL,
333 };
334
335 /**
336 * megaraid_change_queue_depth - Change the device's queue depth
337 * @sdev: scsi device struct
338 * @qdepth: depth to set
339 * @reason: calling context
340 *
341 * Return value:
342 * actual depth set
343 */
344 static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth,
345 int reason)
346 {
347 if (reason != SCSI_QDEPTH_DEFAULT)
348 return -EOPNOTSUPP;
349
350 if (qdepth > MBOX_MAX_SCSI_CMDS)
351 qdepth = MBOX_MAX_SCSI_CMDS;
352 scsi_adjust_queue_depth(sdev, 0, qdepth);
353 return sdev->queue_depth;
354 }
355
356 /*
357 * Scsi host template for megaraid unified driver
358 */
359 static struct scsi_host_template megaraid_template_g = {
360 .module = THIS_MODULE,
361 .name = "LSI Logic MegaRAID driver",
362 .proc_name = "megaraid",
363 .queuecommand = megaraid_queue_command,
364 .eh_abort_handler = megaraid_abort_handler,
365 .eh_device_reset_handler = megaraid_reset_handler,
366 .eh_bus_reset_handler = megaraid_reset_handler,
367 .eh_host_reset_handler = megaraid_reset_handler,
368 .change_queue_depth = megaraid_change_queue_depth,
369 .use_clustering = ENABLE_CLUSTERING,
370 .sdev_attrs = megaraid_sdev_attrs,
371 .shost_attrs = megaraid_shost_attrs,
372 };
373
374
375 /**
376 * megaraid_init - module load hook
377 *
378 * We register ourselves as hotplug enabled module and let PCI subsystem
379 * discover our adapters.
380 */
381 static int __init
382 megaraid_init(void)
383 {
384 int rval;
385
386 // Announce the driver version
387 con_log(CL_ANN, (KERN_INFO "megaraid: %s %s\n", MEGARAID_VERSION,
388 MEGARAID_EXT_VERSION));
389
390 // check validity of module parameters
391 if (megaraid_cmd_per_lun > MBOX_MAX_SCSI_CMDS) {
392
393 con_log(CL_ANN, (KERN_WARNING
394 "megaraid mailbox: max commands per lun reset to %d\n",
395 MBOX_MAX_SCSI_CMDS));
396
397 megaraid_cmd_per_lun = MBOX_MAX_SCSI_CMDS;
398 }
399
400
401 // register as a PCI hot-plug driver module
402 rval = pci_register_driver(&megaraid_pci_driver);
403 if (rval < 0) {
404 con_log(CL_ANN, (KERN_WARNING
405 "megaraid: could not register hotplug support.\n"));
406 }
407
408 return rval;
409 }
410
411
412 /**
413 * megaraid_exit - driver unload entry point
414 *
415 * We simply unwrap the megaraid_init routine here.
416 */
417 static void __exit
418 megaraid_exit(void)
419 {
420 con_log(CL_DLEVEL1, (KERN_NOTICE "megaraid: unloading framework\n"));
421
422 // unregister as PCI hotplug driver
423 pci_unregister_driver(&megaraid_pci_driver);
424
425 return;
426 }
427
428
429 /**
430 * megaraid_probe_one - PCI hotplug entry point
431 * @pdev : handle to this controller's PCI configuration space
432 * @id : pci device id of the class of controllers
433 *
434 * This routine should be called whenever a new adapter is detected by the
435 * PCI hotplug susbsystem.
436 */
437 static int __devinit
438 megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
439 {
440 adapter_t *adapter;
441
442
443 // detected a new controller
444 con_log(CL_ANN, (KERN_INFO
445 "megaraid: probe new device %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
446 pdev->vendor, pdev->device, pdev->subsystem_vendor,
447 pdev->subsystem_device));
448
449 con_log(CL_ANN, ("bus %d:slot %d:func %d\n", pdev->bus->number,
450 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)));
451
452 if (pci_enable_device(pdev)) {
453 con_log(CL_ANN, (KERN_WARNING
454 "megaraid: pci_enable_device failed\n"));
455
456 return -ENODEV;
457 }
458
459 // Enable bus-mastering on this controller
460 pci_set_master(pdev);
461
462 // Allocate the per driver initialization structure
463 adapter = kzalloc(sizeof(adapter_t), GFP_KERNEL);
464
465 if (adapter == NULL) {
466 con_log(CL_ANN, (KERN_WARNING
467 "megaraid: out of memory, %s %d.\n", __func__, __LINE__));
468
469 goto out_probe_one;
470 }
471
472
473 // set up PCI related soft state and other pre-known parameters
474 adapter->unique_id = pdev->bus->number << 8 | pdev->devfn;
475 adapter->irq = pdev->irq;
476 adapter->pdev = pdev;
477
478 atomic_set(&adapter->being_detached, 0);
479
480 // Setup the default DMA mask. This would be changed later on
481 // depending on hardware capabilities
482 if (pci_set_dma_mask(adapter->pdev, DMA_BIT_MASK(32)) != 0) {
483
484 con_log(CL_ANN, (KERN_WARNING
485 "megaraid: pci_set_dma_mask failed:%d\n", __LINE__));
486
487 goto out_free_adapter;
488 }
489
490
491 // Initialize the synchronization lock for kernel and LLD
492 spin_lock_init(&adapter->lock);
493
494 // Initialize the command queues: the list of free SCBs and the list
495 // of pending SCBs.
496 INIT_LIST_HEAD(&adapter->kscb_pool);
497 spin_lock_init(SCSI_FREE_LIST_LOCK(adapter));
498
499 INIT_LIST_HEAD(&adapter->pend_list);
500 spin_lock_init(PENDING_LIST_LOCK(adapter));
501
502 INIT_LIST_HEAD(&adapter->completed_list);
503 spin_lock_init(COMPLETED_LIST_LOCK(adapter));
504
505
506 // Start the mailbox based controller
507 if (megaraid_init_mbox(adapter) != 0) {
508 con_log(CL_ANN, (KERN_WARNING
509 "megaraid: maibox adapter did not initialize\n"));
510
511 goto out_free_adapter;
512 }
513
514 // Register with LSI Common Management Module
515 if (megaraid_cmm_register(adapter) != 0) {
516
517 con_log(CL_ANN, (KERN_WARNING
518 "megaraid: could not register with management module\n"));
519
520 goto out_fini_mbox;
521 }
522
523 // setup adapter handle in PCI soft state
524 pci_set_drvdata(pdev, adapter);
525
526 // attach with scsi mid-layer
527 if (megaraid_io_attach(adapter) != 0) {
528
529 con_log(CL_ANN, (KERN_WARNING "megaraid: io attach failed\n"));
530
531 goto out_cmm_unreg;
532 }
533
534 return 0;
535
536 out_cmm_unreg:
537 pci_set_drvdata(pdev, NULL);
538 megaraid_cmm_unregister(adapter);
539 out_fini_mbox:
540 megaraid_fini_mbox(adapter);
541 out_free_adapter:
542 kfree(adapter);
543 out_probe_one:
544 pci_disable_device(pdev);
545
546 return -ENODEV;
547 }
548
549
550 /**
551 * megaraid_detach_one - release framework resources and call LLD release routine
552 * @pdev : handle for our PCI cofiguration space
553 *
554 * This routine is called during driver unload. We free all the allocated
555 * resources and call the corresponding LLD so that it can also release all
556 * its resources.
557 *
558 * This routine is also called from the PCI hotplug system.
559 */
560 static void
561 megaraid_detach_one(struct pci_dev *pdev)
562 {
563 adapter_t *adapter;
564 struct Scsi_Host *host;
565
566
567 // Start a rollback on this adapter
568 adapter = pci_get_drvdata(pdev);
569
570 if (!adapter) {
571 con_log(CL_ANN, (KERN_CRIT
572 "megaraid: Invalid detach on %#4.04x:%#4.04x:%#4.04x:%#4.04x\n",
573 pdev->vendor, pdev->device, pdev->subsystem_vendor,
574 pdev->subsystem_device));
575
576 return;
577 }
578 else {
579 con_log(CL_ANN, (KERN_NOTICE
580 "megaraid: detaching device %#4.04x:%#4.04x:%#4.04x:%#4.04x\n",
581 pdev->vendor, pdev->device, pdev->subsystem_vendor,
582 pdev->subsystem_device));
583 }
584
585
586 host = adapter->host;
587
588 // do not allow any more requests from the management module for this
589 // adapter.
590 // FIXME: How do we account for the request which might still be
591 // pending with us?
592 atomic_set(&adapter->being_detached, 1);
593
594 // detach from the IO sub-system
595 megaraid_io_detach(adapter);
596
597 // reset the device state in the PCI structure. We check this
598 // condition when we enter here. If the device state is NULL,
599 // that would mean the device has already been removed
600 pci_set_drvdata(pdev, NULL);
601
602 // Unregister from common management module
603 //
604 // FIXME: this must return success or failure for conditions if there
605 // is a command pending with LLD or not.
606 megaraid_cmm_unregister(adapter);
607
608 // finalize the mailbox based controller and release all resources
609 megaraid_fini_mbox(adapter);
610
611 kfree(adapter);
612
613 scsi_host_put(host);
614
615 pci_disable_device(pdev);
616
617 return;
618 }
619
620
621 /**
622 * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA
623 * @pdev : generic driver model device
624 *
625 * Shutdown notification, perform flush cache.
626 */
627 static void
628 megaraid_mbox_shutdown(struct pci_dev *pdev)
629 {
630 adapter_t *adapter = pci_get_drvdata(pdev);
631 static int counter;
632
633 if (!adapter) {
634 con_log(CL_ANN, (KERN_WARNING
635 "megaraid: null device in shutdown\n"));
636 return;
637 }
638
639 // flush caches now
640 con_log(CL_ANN, (KERN_INFO "megaraid: flushing adapter %d...",
641 counter++));
642
643 megaraid_mbox_flush_cache(adapter);
644
645 con_log(CL_ANN, ("done\n"));
646 }
647
648
649 /**
650 * megaraid_io_attach - attach a device with the IO subsystem
651 * @adapter : controller's soft state
652 *
653 * Attach this device with the IO subsystem.
654 */
655 static int
656 megaraid_io_attach(adapter_t *adapter)
657 {
658 struct Scsi_Host *host;
659
660 // Initialize SCSI Host structure
661 host = scsi_host_alloc(&megaraid_template_g, 8);
662 if (!host) {
663 con_log(CL_ANN, (KERN_WARNING
664 "megaraid mbox: scsi_register failed\n"));
665
666 return -1;
667 }
668
669 SCSIHOST2ADAP(host) = (caddr_t)adapter;
670 adapter->host = host;
671
672 host->irq = adapter->irq;
673 host->unique_id = adapter->unique_id;
674 host->can_queue = adapter->max_cmds;
675 host->this_id = adapter->init_id;
676 host->sg_tablesize = adapter->sglen;
677 host->max_sectors = adapter->max_sectors;
678 host->cmd_per_lun = adapter->cmd_per_lun;
679 host->max_channel = adapter->max_channel;
680 host->max_id = adapter->max_target;
681 host->max_lun = adapter->max_lun;
682
683
684 // notify mid-layer about the new controller
685 if (scsi_add_host(host, &adapter->pdev->dev)) {
686
687 con_log(CL_ANN, (KERN_WARNING
688 "megaraid mbox: scsi_add_host failed\n"));
689
690 scsi_host_put(host);
691
692 return -1;
693 }
694
695 scsi_scan_host(host);
696
697 return 0;
698 }
699
700
701 /**
702 * megaraid_io_detach - detach a device from the IO subsystem
703 * @adapter : controller's soft state
704 *
705 * Detach this device from the IO subsystem.
706 */
707 static void
708 megaraid_io_detach(adapter_t *adapter)
709 {
710 struct Scsi_Host *host;
711
712 con_log(CL_DLEVEL1, (KERN_INFO "megaraid: io detach\n"));
713
714 host = adapter->host;
715
716 scsi_remove_host(host);
717
718 return;
719 }
720
721
722 /*
723 * START: Mailbox Low Level Driver
724 *
725 * This is section specific to the single mailbox based controllers
726 */
727
728 /**
729 * megaraid_init_mbox - initialize controller
730 * @adapter : our soft state
731 *
732 * - Allocate 16-byte aligned mailbox memory for firmware handshake
733 * - Allocate controller's memory resources
734 * - Find out all initialization data
735 * - Allocate memory required for all the commands
736 * - Use internal library of FW routines, build up complete soft state
737 */
738 static int __devinit
739 megaraid_init_mbox(adapter_t *adapter)
740 {
741 struct pci_dev *pdev;
742 mraid_device_t *raid_dev;
743 int i;
744 uint32_t magic64;
745
746
747 adapter->ito = MBOX_TIMEOUT;
748 pdev = adapter->pdev;
749
750 /*
751 * Allocate and initialize the init data structure for mailbox
752 * controllers
753 */
754 raid_dev = kzalloc(sizeof(mraid_device_t), GFP_KERNEL);
755 if (raid_dev == NULL) return -1;
756
757
758 /*
759 * Attach the adapter soft state to raid device soft state
760 */
761 adapter->raid_device = (caddr_t)raid_dev;
762 raid_dev->fast_load = megaraid_fast_load;
763
764
765 // our baseport
766 raid_dev->baseport = pci_resource_start(pdev, 0);
767
768 if (pci_request_regions(pdev, "MegaRAID: LSI Logic Corporation") != 0) {
769
770 con_log(CL_ANN, (KERN_WARNING
771 "megaraid: mem region busy\n"));
772
773 goto out_free_raid_dev;
774 }
775
776 raid_dev->baseaddr = ioremap_nocache(raid_dev->baseport, 128);
777
778 if (!raid_dev->baseaddr) {
779
780 con_log(CL_ANN, (KERN_WARNING
781 "megaraid: could not map hba memory\n") );
782
783 goto out_release_regions;
784 }
785
786 /* initialize the mutual exclusion lock for the mailbox */
787 spin_lock_init(&raid_dev->mailbox_lock);
788
789 /* allocate memory required for commands */
790 if (megaraid_alloc_cmd_packets(adapter) != 0)
791 goto out_iounmap;
792
793 /*
794 * Issue SYNC cmd to flush the pending cmds in the adapter
795 * and initialize its internal state
796 */
797
798 if (megaraid_mbox_fire_sync_cmd(adapter))
799 con_log(CL_ANN, ("megaraid: sync cmd failed\n"));
800
801 /*
802 * Setup the rest of the soft state using the library of
803 * FW routines
804 */
805
806 /* request IRQ and register the interrupt service routine */
807 if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
808 adapter)) {
809
810 con_log(CL_ANN, (KERN_WARNING
811 "megaraid: Couldn't register IRQ %d!\n", adapter->irq));
812 goto out_alloc_cmds;
813
814 }
815
816 // Product info
817 if (megaraid_mbox_product_info(adapter) != 0)
818 goto out_free_irq;
819
820 // Do we support extended CDBs
821 adapter->max_cdb_sz = 10;
822 if (megaraid_mbox_extended_cdb(adapter) == 0) {
823 adapter->max_cdb_sz = 16;
824 }
825
826 /*
827 * Do we support cluster environment, if we do, what is the initiator
828 * id.
829 * NOTE: In a non-cluster aware firmware environment, the LLD should
830 * return 7 as initiator id.
831 */
832 adapter->ha = 0;
833 adapter->init_id = -1;
834 if (megaraid_mbox_support_ha(adapter, &adapter->init_id) == 0) {
835 adapter->ha = 1;
836 }
837
838 /*
839 * Prepare the device ids array to have the mapping between the kernel
840 * device address and megaraid device address.
841 * We export the physical devices on their actual addresses. The
842 * logical drives are exported on a virtual SCSI channel
843 */
844 megaraid_mbox_setup_device_map(adapter);
845
846 // If the firmware supports random deletion, update the device id map
847 if (megaraid_mbox_support_random_del(adapter)) {
848
849 // Change the logical drives numbers in device_ids array one
850 // slot in device_ids is reserved for target id, that's why
851 // "<=" below
852 for (i = 0; i <= MAX_LOGICAL_DRIVES_40LD; i++) {
853 adapter->device_ids[adapter->max_channel][i] += 0x80;
854 }
855 adapter->device_ids[adapter->max_channel][adapter->init_id] =
856 0xFF;
857
858 raid_dev->random_del_supported = 1;
859 }
860
861 /*
862 * find out the maximum number of scatter-gather elements supported by
863 * this firmware
864 */
865 adapter->sglen = megaraid_mbox_get_max_sg(adapter);
866
867 // enumerate RAID and SCSI channels so that all devices on SCSI
868 // channels can later be exported, including disk devices
869 megaraid_mbox_enum_raid_scsi(adapter);
870
871 /*
872 * Other parameters required by upper layer
873 *
874 * maximum number of sectors per IO command
875 */
876 adapter->max_sectors = megaraid_max_sectors;
877
878 /*
879 * number of queued commands per LUN.
880 */
881 adapter->cmd_per_lun = megaraid_cmd_per_lun;
882
883 /*
884 * Allocate resources required to issue FW calls, when sysfs is
885 * accessed
886 */
887 if (megaraid_sysfs_alloc_resources(adapter) != 0)
888 goto out_free_irq;
889
890 // Set the DMA mask to 64-bit. All supported controllers as capable of
891 // DMA in this range
892 pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64);
893
894 if (((magic64 == HBA_SIGNATURE_64_BIT) &&
895 ((adapter->pdev->subsystem_device !=
896 PCI_SUBSYS_ID_MEGARAID_SATA_150_6) &&
897 (adapter->pdev->subsystem_device !=
898 PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) ||
899 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
900 adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
901 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
902 adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
903 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
904 adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) ||
905 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
906 adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
907 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
908 adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) {
909 if (pci_set_dma_mask(adapter->pdev, DMA_BIT_MASK(64))) {
910 con_log(CL_ANN, (KERN_WARNING
911 "megaraid: DMA mask for 64-bit failed\n"));
912
913 if (pci_set_dma_mask (adapter->pdev, DMA_BIT_MASK(32))) {
914 con_log(CL_ANN, (KERN_WARNING
915 "megaraid: 32-bit DMA mask failed\n"));
916 goto out_free_sysfs_res;
917 }
918 }
919 }
920
921 // setup tasklet for DPC
922 tasklet_init(&adapter->dpc_h, megaraid_mbox_dpc,
923 (unsigned long)adapter);
924
925 con_log(CL_DLEVEL1, (KERN_INFO
926 "megaraid mbox hba successfully initialized\n"));
927
928 return 0;
929
930 out_free_sysfs_res:
931 megaraid_sysfs_free_resources(adapter);
932 out_free_irq:
933 free_irq(adapter->irq, adapter);
934 out_alloc_cmds:
935 megaraid_free_cmd_packets(adapter);
936 out_iounmap:
937 iounmap(raid_dev->baseaddr);
938 out_release_regions:
939 pci_release_regions(pdev);
940 out_free_raid_dev:
941 kfree(raid_dev);
942
943 return -1;
944 }
945
946
947 /**
948 * megaraid_fini_mbox - undo controller initialization
949 * @adapter : our soft state
950 */
951 static void
952 megaraid_fini_mbox(adapter_t *adapter)
953 {
954 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
955
956 // flush all caches
957 megaraid_mbox_flush_cache(adapter);
958
959 tasklet_kill(&adapter->dpc_h);
960
961 megaraid_sysfs_free_resources(adapter);
962
963 megaraid_free_cmd_packets(adapter);
964
965 free_irq(adapter->irq, adapter);
966
967 iounmap(raid_dev->baseaddr);
968
969 pci_release_regions(adapter->pdev);
970
971 kfree(raid_dev);
972
973 return;
974 }
975
976
977 /**
978 * megaraid_alloc_cmd_packets - allocate shared mailbox
979 * @adapter : soft state of the raid controller
980 *
981 * Allocate and align the shared mailbox. This maibox is used to issue
982 * all the commands. For IO based controllers, the mailbox is also regsitered
983 * with the FW. Allocate memory for all commands as well.
984 * This is our big allocator.
985 */
986 static int
987 megaraid_alloc_cmd_packets(adapter_t *adapter)
988 {
989 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
990 struct pci_dev *pdev;
991 unsigned long align;
992 scb_t *scb;
993 mbox_ccb_t *ccb;
994 struct mraid_pci_blk *epthru_pci_blk;
995 struct mraid_pci_blk *sg_pci_blk;
996 struct mraid_pci_blk *mbox_pci_blk;
997 int i;
998
999 pdev = adapter->pdev;
1000
1001 /*
1002 * Setup the mailbox
1003 * Allocate the common 16-byte aligned memory for the handshake
1004 * mailbox.
1005 */
1006 raid_dev->una_mbox64 = pci_alloc_consistent(adapter->pdev,
1007 sizeof(mbox64_t), &raid_dev->una_mbox64_dma);
1008
1009 if (!raid_dev->una_mbox64) {
1010 con_log(CL_ANN, (KERN_WARNING
1011 "megaraid: out of memory, %s %d\n", __func__,
1012 __LINE__));
1013 return -1;
1014 }
1015 memset(raid_dev->una_mbox64, 0, sizeof(mbox64_t));
1016
1017 /*
1018 * Align the mailbox at 16-byte boundary
1019 */
1020 raid_dev->mbox = &raid_dev->una_mbox64->mbox32;
1021
1022 raid_dev->mbox = (mbox_t *)((((unsigned long)raid_dev->mbox) + 15) &
1023 (~0UL ^ 0xFUL));
1024
1025 raid_dev->mbox64 = (mbox64_t *)(((unsigned long)raid_dev->mbox) - 8);
1026
1027 align = ((void *)raid_dev->mbox -
1028 ((void *)&raid_dev->una_mbox64->mbox32));
1029
1030 raid_dev->mbox_dma = (unsigned long)raid_dev->una_mbox64_dma + 8 +
1031 align;
1032
1033 // Allocate memory for commands issued internally
1034 adapter->ibuf = pci_alloc_consistent(pdev, MBOX_IBUF_SIZE,
1035 &adapter->ibuf_dma_h);
1036 if (!adapter->ibuf) {
1037
1038 con_log(CL_ANN, (KERN_WARNING
1039 "megaraid: out of memory, %s %d\n", __func__,
1040 __LINE__));
1041
1042 goto out_free_common_mbox;
1043 }
1044 memset(adapter->ibuf, 0, MBOX_IBUF_SIZE);
1045
1046 // Allocate memory for our SCSI Command Blocks and their associated
1047 // memory
1048
1049 /*
1050 * Allocate memory for the base list of scb. Later allocate memory for
1051 * CCBs and embedded components of each CCB and point the pointers in
1052 * scb to the allocated components
1053 * NOTE: The code to allocate SCB will be duplicated in all the LLD
1054 * since the calling routine does not yet know the number of available
1055 * commands.
1056 */
1057 adapter->kscb_list = kcalloc(MBOX_MAX_SCSI_CMDS, sizeof(scb_t), GFP_KERNEL);
1058
1059 if (adapter->kscb_list == NULL) {
1060 con_log(CL_ANN, (KERN_WARNING
1061 "megaraid: out of memory, %s %d\n", __func__,
1062 __LINE__));
1063 goto out_free_ibuf;
1064 }
1065
1066 // memory allocation for our command packets
1067 if (megaraid_mbox_setup_dma_pools(adapter) != 0) {
1068 con_log(CL_ANN, (KERN_WARNING
1069 "megaraid: out of memory, %s %d\n", __func__,
1070 __LINE__));
1071 goto out_free_scb_list;
1072 }
1073
1074 // Adjust the scb pointers and link in the free pool
1075 epthru_pci_blk = raid_dev->epthru_pool;
1076 sg_pci_blk = raid_dev->sg_pool;
1077 mbox_pci_blk = raid_dev->mbox_pool;
1078
1079 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1080 scb = adapter->kscb_list + i;
1081 ccb = raid_dev->ccb_list + i;
1082
1083 ccb->mbox = (mbox_t *)(mbox_pci_blk[i].vaddr + 16);
1084 ccb->raw_mbox = (uint8_t *)ccb->mbox;
1085 ccb->mbox64 = (mbox64_t *)(mbox_pci_blk[i].vaddr + 8);
1086 ccb->mbox_dma_h = (unsigned long)mbox_pci_blk[i].dma_addr + 16;
1087
1088 // make sure the mailbox is aligned properly
1089 if (ccb->mbox_dma_h & 0x0F) {
1090 con_log(CL_ANN, (KERN_CRIT
1091 "megaraid mbox: not aligned on 16-bytes\n"));
1092
1093 goto out_teardown_dma_pools;
1094 }
1095
1096 ccb->epthru = (mraid_epassthru_t *)
1097 epthru_pci_blk[i].vaddr;
1098 ccb->epthru_dma_h = epthru_pci_blk[i].dma_addr;
1099 ccb->pthru = (mraid_passthru_t *)ccb->epthru;
1100 ccb->pthru_dma_h = ccb->epthru_dma_h;
1101
1102
1103 ccb->sgl64 = (mbox_sgl64 *)sg_pci_blk[i].vaddr;
1104 ccb->sgl_dma_h = sg_pci_blk[i].dma_addr;
1105 ccb->sgl32 = (mbox_sgl32 *)ccb->sgl64;
1106
1107 scb->ccb = (caddr_t)ccb;
1108 scb->gp = 0;
1109
1110 scb->sno = i; // command index
1111
1112 scb->scp = NULL;
1113 scb->state = SCB_FREE;
1114 scb->dma_direction = PCI_DMA_NONE;
1115 scb->dma_type = MRAID_DMA_NONE;
1116 scb->dev_channel = -1;
1117 scb->dev_target = -1;
1118
1119 // put scb in the free pool
1120 list_add_tail(&scb->list, &adapter->kscb_pool);
1121 }
1122
1123 return 0;
1124
1125 out_teardown_dma_pools:
1126 megaraid_mbox_teardown_dma_pools(adapter);
1127 out_free_scb_list:
1128 kfree(adapter->kscb_list);
1129 out_free_ibuf:
1130 pci_free_consistent(pdev, MBOX_IBUF_SIZE, (void *)adapter->ibuf,
1131 adapter->ibuf_dma_h);
1132 out_free_common_mbox:
1133 pci_free_consistent(adapter->pdev, sizeof(mbox64_t),
1134 (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma);
1135
1136 return -1;
1137 }
1138
1139
1140 /**
1141 * megaraid_free_cmd_packets - free memory
1142 * @adapter : soft state of the raid controller
1143 *
1144 * Release memory resources allocated for commands.
1145 */
1146 static void
1147 megaraid_free_cmd_packets(adapter_t *adapter)
1148 {
1149 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1150
1151 megaraid_mbox_teardown_dma_pools(adapter);
1152
1153 kfree(adapter->kscb_list);
1154
1155 pci_free_consistent(adapter->pdev, MBOX_IBUF_SIZE,
1156 (void *)adapter->ibuf, adapter->ibuf_dma_h);
1157
1158 pci_free_consistent(adapter->pdev, sizeof(mbox64_t),
1159 (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma);
1160 return;
1161 }
1162
1163
1164 /**
1165 * megaraid_mbox_setup_dma_pools - setup dma pool for command packets
1166 * @adapter : HBA soft state
1167 *
1168 * Setup the dma pools for mailbox, passthru and extended passthru structures,
1169 * and scatter-gather lists.
1170 */
1171 static int
1172 megaraid_mbox_setup_dma_pools(adapter_t *adapter)
1173 {
1174 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1175 struct mraid_pci_blk *epthru_pci_blk;
1176 struct mraid_pci_blk *sg_pci_blk;
1177 struct mraid_pci_blk *mbox_pci_blk;
1178 int i;
1179
1180
1181
1182 // Allocate memory for 16-bytes aligned mailboxes
1183 raid_dev->mbox_pool_handle = pci_pool_create("megaraid mbox pool",
1184 adapter->pdev,
1185 sizeof(mbox64_t) + 16,
1186 16, 0);
1187
1188 if (raid_dev->mbox_pool_handle == NULL) {
1189 goto fail_setup_dma_pool;
1190 }
1191
1192 mbox_pci_blk = raid_dev->mbox_pool;
1193 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1194 mbox_pci_blk[i].vaddr = pci_pool_alloc(
1195 raid_dev->mbox_pool_handle,
1196 GFP_KERNEL,
1197 &mbox_pci_blk[i].dma_addr);
1198 if (!mbox_pci_blk[i].vaddr) {
1199 goto fail_setup_dma_pool;
1200 }
1201 }
1202
1203 /*
1204 * Allocate memory for each embedded passthru strucuture pointer
1205 * Request for a 128 bytes aligned structure for each passthru command
1206 * structure
1207 * Since passthru and extended passthru commands are exclusive, they
1208 * share common memory pool. Passthru structures piggyback on memory
1209 * allocted to extended passthru since passthru is smaller of the two
1210 */
1211 raid_dev->epthru_pool_handle = pci_pool_create("megaraid mbox pthru",
1212 adapter->pdev, sizeof(mraid_epassthru_t), 128, 0);
1213
1214 if (raid_dev->epthru_pool_handle == NULL) {
1215 goto fail_setup_dma_pool;
1216 }
1217
1218 epthru_pci_blk = raid_dev->epthru_pool;
1219 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1220 epthru_pci_blk[i].vaddr = pci_pool_alloc(
1221 raid_dev->epthru_pool_handle,
1222 GFP_KERNEL,
1223 &epthru_pci_blk[i].dma_addr);
1224 if (!epthru_pci_blk[i].vaddr) {
1225 goto fail_setup_dma_pool;
1226 }
1227 }
1228
1229
1230 // Allocate memory for each scatter-gather list. Request for 512 bytes
1231 // alignment for each sg list
1232 raid_dev->sg_pool_handle = pci_pool_create("megaraid mbox sg",
1233 adapter->pdev,
1234 sizeof(mbox_sgl64) * MBOX_MAX_SG_SIZE,
1235 512, 0);
1236
1237 if (raid_dev->sg_pool_handle == NULL) {
1238 goto fail_setup_dma_pool;
1239 }
1240
1241 sg_pci_blk = raid_dev->sg_pool;
1242 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1243 sg_pci_blk[i].vaddr = pci_pool_alloc(
1244 raid_dev->sg_pool_handle,
1245 GFP_KERNEL,
1246 &sg_pci_blk[i].dma_addr);
1247 if (!sg_pci_blk[i].vaddr) {
1248 goto fail_setup_dma_pool;
1249 }
1250 }
1251
1252 return 0;
1253
1254 fail_setup_dma_pool:
1255 megaraid_mbox_teardown_dma_pools(adapter);
1256 return -1;
1257 }
1258
1259
1260 /**
1261 * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets
1262 * @adapter : HBA soft state
1263 *
1264 * Teardown the dma pool for mailbox, passthru and extended passthru
1265 * structures, and scatter-gather lists.
1266 */
1267 static void
1268 megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
1269 {
1270 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1271 struct mraid_pci_blk *epthru_pci_blk;
1272 struct mraid_pci_blk *sg_pci_blk;
1273 struct mraid_pci_blk *mbox_pci_blk;
1274 int i;
1275
1276
1277 sg_pci_blk = raid_dev->sg_pool;
1278 for (i = 0; i < MBOX_MAX_SCSI_CMDS && sg_pci_blk[i].vaddr; i++) {
1279 pci_pool_free(raid_dev->sg_pool_handle, sg_pci_blk[i].vaddr,
1280 sg_pci_blk[i].dma_addr);
1281 }
1282 if (raid_dev->sg_pool_handle)
1283 pci_pool_destroy(raid_dev->sg_pool_handle);
1284
1285
1286 epthru_pci_blk = raid_dev->epthru_pool;
1287 for (i = 0; i < MBOX_MAX_SCSI_CMDS && epthru_pci_blk[i].vaddr; i++) {
1288 pci_pool_free(raid_dev->epthru_pool_handle,
1289 epthru_pci_blk[i].vaddr, epthru_pci_blk[i].dma_addr);
1290 }
1291 if (raid_dev->epthru_pool_handle)
1292 pci_pool_destroy(raid_dev->epthru_pool_handle);
1293
1294
1295 mbox_pci_blk = raid_dev->mbox_pool;
1296 for (i = 0; i < MBOX_MAX_SCSI_CMDS && mbox_pci_blk[i].vaddr; i++) {
1297 pci_pool_free(raid_dev->mbox_pool_handle,
1298 mbox_pci_blk[i].vaddr, mbox_pci_blk[i].dma_addr);
1299 }
1300 if (raid_dev->mbox_pool_handle)
1301 pci_pool_destroy(raid_dev->mbox_pool_handle);
1302
1303 return;
1304 }
1305
1306
1307 /**
1308 * megaraid_alloc_scb - detach and return a scb from the free list
1309 * @adapter : controller's soft state
1310 * @scp : pointer to the scsi command to be executed
1311 *
1312 * Return the scb from the head of the free list. %NULL if there are none
1313 * available.
1314 */
1315 static scb_t *
1316 megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
1317 {
1318 struct list_head *head = &adapter->kscb_pool;
1319 scb_t *scb = NULL;
1320 unsigned long flags;
1321
1322 // detach scb from free pool
1323 spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags);
1324
1325 if (list_empty(head)) {
1326 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1327 return NULL;
1328 }
1329
1330 scb = list_entry(head->next, scb_t, list);
1331 list_del_init(&scb->list);
1332
1333 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1334
1335 scb->state = SCB_ACTIVE;
1336 scb->scp = scp;
1337 scb->dma_type = MRAID_DMA_NONE;
1338
1339 return scb;
1340 }
1341
1342
1343 /**
1344 * megaraid_dealloc_scb - return the scb to the free pool
1345 * @adapter : controller's soft state
1346 * @scb : scb to be freed
1347 *
1348 * Return the scb back to the free list of scbs. The caller must 'flush' the
1349 * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc.
1350 * NOTE NOTE: Make sure the scb is not on any list before calling this
1351 * routine.
1352 */
1353 static inline void
1354 megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
1355 {
1356 unsigned long flags;
1357
1358 // put scb in the free pool
1359 scb->state = SCB_FREE;
1360 scb->scp = NULL;
1361 spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags);
1362
1363 list_add(&scb->list, &adapter->kscb_pool);
1364
1365 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1366
1367 return;
1368 }
1369
1370
1371 /**
1372 * megaraid_mbox_mksgl - make the scatter-gather list
1373 * @adapter : controller's soft state
1374 * @scb : scsi control block
1375 *
1376 * Prepare the scatter-gather list.
1377 */
1378 static int
1379 megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
1380 {
1381 struct scatterlist *sgl;
1382 mbox_ccb_t *ccb;
1383 struct scsi_cmnd *scp;
1384 int sgcnt;
1385 int i;
1386
1387
1388 scp = scb->scp;
1389 ccb = (mbox_ccb_t *)scb->ccb;
1390
1391 sgcnt = scsi_dma_map(scp);
1392 BUG_ON(sgcnt < 0 || sgcnt > adapter->sglen);
1393
1394 // no mapping required if no data to be transferred
1395 if (!sgcnt)
1396 return 0;
1397
1398 scb->dma_type = MRAID_DMA_WSG;
1399
1400 scsi_for_each_sg(scp, sgl, sgcnt, i) {
1401 ccb->sgl64[i].address = sg_dma_address(sgl);
1402 ccb->sgl64[i].length = sg_dma_len(sgl);
1403 }
1404
1405 // Return count of SG nodes
1406 return sgcnt;
1407 }
1408
1409
1410 /**
1411 * mbox_post_cmd - issue a mailbox command
1412 * @adapter : controller's soft state
1413 * @scb : command to be issued
1414 *
1415 * Post the command to the controller if mailbox is available.
1416 */
1417 static int
1418 mbox_post_cmd(adapter_t *adapter, scb_t *scb)
1419 {
1420 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1421 mbox64_t *mbox64;
1422 mbox_t *mbox;
1423 mbox_ccb_t *ccb;
1424 unsigned long flags;
1425 unsigned int i = 0;
1426
1427
1428 ccb = (mbox_ccb_t *)scb->ccb;
1429 mbox = raid_dev->mbox;
1430 mbox64 = raid_dev->mbox64;
1431
1432 /*
1433 * Check for busy mailbox. If it is, return failure - the caller
1434 * should retry later.
1435 */
1436 spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags);
1437
1438 if (unlikely(mbox->busy)) {
1439 do {
1440 udelay(1);
1441 i++;
1442 rmb();
1443 } while(mbox->busy && (i < max_mbox_busy_wait));
1444
1445 if (mbox->busy) {
1446
1447 spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
1448
1449 return -1;
1450 }
1451 }
1452
1453
1454 // Copy this command's mailbox data into "adapter's" mailbox
1455 memcpy((caddr_t)mbox64, (caddr_t)ccb->mbox64, 22);
1456 mbox->cmdid = scb->sno;
1457
1458 adapter->outstanding_cmds++;
1459
1460 if (scb->dma_direction == PCI_DMA_TODEVICE)
1461 pci_dma_sync_sg_for_device(adapter->pdev,
1462 scsi_sglist(scb->scp),
1463 scsi_sg_count(scb->scp),
1464 PCI_DMA_TODEVICE);
1465
1466 mbox->busy = 1; // Set busy
1467 mbox->poll = 0;
1468 mbox->ack = 0;
1469 wmb();
1470
1471 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
1472
1473 spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
1474
1475 return 0;
1476 }
1477
1478
1479 /**
1480 * megaraid_queue_command - generic queue entry point for all LLDs
1481 * @scp : pointer to the scsi command to be executed
1482 * @done : callback routine to be called after the cmd has be completed
1483 *
1484 * Queue entry point for mailbox based controllers.
1485 */
1486 static int
1487 megaraid_queue_command_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
1488 {
1489 adapter_t *adapter;
1490 scb_t *scb;
1491 int if_busy;
1492
1493 adapter = SCP2ADAPTER(scp);
1494 scp->scsi_done = done;
1495 scp->result = 0;
1496
1497 /*
1498 * Allocate and build a SCB request
1499 * if_busy flag will be set if megaraid_mbox_build_cmd() command could
1500 * not allocate scb. We will return non-zero status in that case.
1501 * NOTE: scb can be null even though certain commands completed
1502 * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, it would
1503 * return 0 in that case, and we would do the callback right away.
1504 */
1505 if_busy = 0;
1506 scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
1507 if (!scb) { // command already completed
1508 done(scp);
1509 return 0;
1510 }
1511
1512 megaraid_mbox_runpendq(adapter, scb);
1513 return if_busy;
1514 }
1515
1516 static DEF_SCSI_QCMD(megaraid_queue_command)
1517
1518 /**
1519 * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
1520 * @adapter : controller's soft state
1521 * @scp : mid-layer scsi command pointer
1522 * @busy : set if request could not be completed because of lack of
1523 * resources
1524 *
1525 * Transform the mid-layer scsi command to megaraid firmware lingua.
1526 * Convert the command issued by mid-layer to format understood by megaraid
1527 * firmware. We also complete certain commands without sending them to firmware.
1528 */
1529 static scb_t *
1530 megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
1531 {
1532 mraid_device_t *rdev = ADAP2RAIDDEV(adapter);
1533 int channel;
1534 int target;
1535 int islogical;
1536 mbox_ccb_t *ccb;
1537 mraid_passthru_t *pthru;
1538 mbox64_t *mbox64;
1539 mbox_t *mbox;
1540 scb_t *scb;
1541 char skip[] = "skipping";
1542 char scan[] = "scanning";
1543 char *ss;
1544
1545
1546 /*
1547 * Get the appropriate device map for the device this command is
1548 * intended for
1549 */
1550 MRAID_GET_DEVICE_MAP(adapter, scp, channel, target, islogical);
1551
1552 /*
1553 * Logical drive commands
1554 */
1555 if (islogical) {
1556 switch (scp->cmnd[0]) {
1557 case TEST_UNIT_READY:
1558 /*
1559 * Do we support clustering and is the support enabled
1560 * If no, return success always
1561 */
1562 if (!adapter->ha) {
1563 scp->result = (DID_OK << 16);
1564 return NULL;
1565 }
1566
1567 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1568 scp->result = (DID_ERROR << 16);
1569 *busy = 1;
1570 return NULL;
1571 }
1572
1573 scb->dma_direction = scp->sc_data_direction;
1574 scb->dev_channel = 0xFF;
1575 scb->dev_target = target;
1576 ccb = (mbox_ccb_t *)scb->ccb;
1577
1578 /*
1579 * The command id will be provided by the command
1580 * issuance routine
1581 */
1582 ccb->raw_mbox[0] = CLUSTER_CMD;
1583 ccb->raw_mbox[2] = RESERVATION_STATUS;
1584 ccb->raw_mbox[3] = target;
1585
1586 return scb;
1587
1588 case MODE_SENSE:
1589 {
1590 struct scatterlist *sgl;
1591 caddr_t vaddr;
1592
1593 sgl = scsi_sglist(scp);
1594 if (sg_page(sgl)) {
1595 vaddr = (caddr_t) sg_virt(&sgl[0]);
1596
1597 memset(vaddr, 0, scp->cmnd[4]);
1598 }
1599 else {
1600 con_log(CL_ANN, (KERN_WARNING
1601 "megaraid mailbox: invalid sg:%d\n",
1602 __LINE__));
1603 }
1604 }
1605 scp->result = (DID_OK << 16);
1606 return NULL;
1607
1608 case INQUIRY:
1609 /*
1610 * Display the channel scan for logical drives
1611 * Do not display scan for a channel if already done.
1612 */
1613 if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) {
1614
1615 con_log(CL_ANN, (KERN_INFO
1616 "scsi[%d]: scanning scsi channel %d",
1617 adapter->host->host_no,
1618 SCP2CHANNEL(scp)));
1619
1620 con_log(CL_ANN, (
1621 " [virtual] for logical drives\n"));
1622
1623 rdev->last_disp |= (1L << SCP2CHANNEL(scp));
1624 }
1625
1626 if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) {
1627 scp->sense_buffer[0] = 0x70;
1628 scp->sense_buffer[2] = ILLEGAL_REQUEST;
1629 scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB;
1630 scp->result = CHECK_CONDITION << 1;
1631 return NULL;
1632 }
1633
1634 /* Fall through */
1635
1636 case READ_CAPACITY:
1637 /*
1638 * Do not allow LUN > 0 for logical drives and
1639 * requests for more than 40 logical drives
1640 */
1641 if (SCP2LUN(scp)) {
1642 scp->result = (DID_BAD_TARGET << 16);
1643 return NULL;
1644 }
1645 if ((target % 0x80) >= MAX_LOGICAL_DRIVES_40LD) {
1646 scp->result = (DID_BAD_TARGET << 16);
1647 return NULL;
1648 }
1649
1650
1651 /* Allocate a SCB and initialize passthru */
1652 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1653 scp->result = (DID_ERROR << 16);
1654 *busy = 1;
1655 return NULL;
1656 }
1657
1658 ccb = (mbox_ccb_t *)scb->ccb;
1659 scb->dev_channel = 0xFF;
1660 scb->dev_target = target;
1661 pthru = ccb->pthru;
1662 mbox = ccb->mbox;
1663 mbox64 = ccb->mbox64;
1664
1665 pthru->timeout = 0;
1666 pthru->ars = 1;
1667 pthru->reqsenselen = 14;
1668 pthru->islogical = 1;
1669 pthru->logdrv = target;
1670 pthru->cdblen = scp->cmd_len;
1671 memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
1672
1673 mbox->cmd = MBOXCMD_PASSTHRU64;
1674 scb->dma_direction = scp->sc_data_direction;
1675
1676 pthru->dataxferlen = scsi_bufflen(scp);
1677 pthru->dataxferaddr = ccb->sgl_dma_h;
1678 pthru->numsge = megaraid_mbox_mksgl(adapter,
1679 scb);
1680
1681 mbox->xferaddr = 0xFFFFFFFF;
1682 mbox64->xferaddr_lo = (uint32_t )ccb->pthru_dma_h;
1683 mbox64->xferaddr_hi = 0;
1684
1685 return scb;
1686
1687 case READ_6:
1688 case WRITE_6:
1689 case READ_10:
1690 case WRITE_10:
1691 case READ_12:
1692 case WRITE_12:
1693
1694 /*
1695 * Allocate a SCB and initialize mailbox
1696 */
1697 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1698 scp->result = (DID_ERROR << 16);
1699 *busy = 1;
1700 return NULL;
1701 }
1702 ccb = (mbox_ccb_t *)scb->ccb;
1703 scb->dev_channel = 0xFF;
1704 scb->dev_target = target;
1705 mbox = ccb->mbox;
1706 mbox64 = ccb->mbox64;
1707 mbox->logdrv = target;
1708
1709 /*
1710 * A little HACK: 2nd bit is zero for all scsi read
1711 * commands and is set for all scsi write commands
1712 */
1713 mbox->cmd = (scp->cmnd[0] & 0x02) ? MBOXCMD_LWRITE64:
1714 MBOXCMD_LREAD64 ;
1715
1716 /*
1717 * 6-byte READ(0x08) or WRITE(0x0A) cdb
1718 */
1719 if (scp->cmd_len == 6) {
1720 mbox->numsectors = (uint32_t)scp->cmnd[4];
1721 mbox->lba =
1722 ((uint32_t)scp->cmnd[1] << 16) |
1723 ((uint32_t)scp->cmnd[2] << 8) |
1724 (uint32_t)scp->cmnd[3];
1725
1726 mbox->lba &= 0x1FFFFF;
1727 }
1728
1729 /*
1730 * 10-byte READ(0x28) or WRITE(0x2A) cdb
1731 */
1732 else if (scp->cmd_len == 10) {
1733 mbox->numsectors =
1734 (uint32_t)scp->cmnd[8] |
1735 ((uint32_t)scp->cmnd[7] << 8);
1736 mbox->lba =
1737 ((uint32_t)scp->cmnd[2] << 24) |
1738 ((uint32_t)scp->cmnd[3] << 16) |
1739 ((uint32_t)scp->cmnd[4] << 8) |
1740 (uint32_t)scp->cmnd[5];
1741 }
1742
1743 /*
1744 * 12-byte READ(0xA8) or WRITE(0xAA) cdb
1745 */
1746 else if (scp->cmd_len == 12) {
1747 mbox->lba =
1748 ((uint32_t)scp->cmnd[2] << 24) |
1749 ((uint32_t)scp->cmnd[3] << 16) |
1750 ((uint32_t)scp->cmnd[4] << 8) |
1751 (uint32_t)scp->cmnd[5];
1752
1753 mbox->numsectors =
1754 ((uint32_t)scp->cmnd[6] << 24) |
1755 ((uint32_t)scp->cmnd[7] << 16) |
1756 ((uint32_t)scp->cmnd[8] << 8) |
1757 (uint32_t)scp->cmnd[9];
1758 }
1759 else {
1760 con_log(CL_ANN, (KERN_WARNING
1761 "megaraid: unsupported CDB length\n"));
1762
1763 megaraid_dealloc_scb(adapter, scb);
1764
1765 scp->result = (DID_ERROR << 16);
1766 return NULL;
1767 }
1768
1769 scb->dma_direction = scp->sc_data_direction;
1770
1771 // Calculate Scatter-Gather info
1772 mbox64->xferaddr_lo = (uint32_t )ccb->sgl_dma_h;
1773 mbox->numsge = megaraid_mbox_mksgl(adapter,
1774 scb);
1775 mbox->xferaddr = 0xFFFFFFFF;
1776 mbox64->xferaddr_hi = 0;
1777
1778 return scb;
1779
1780 case RESERVE:
1781 case RELEASE:
1782 /*
1783 * Do we support clustering and is the support enabled
1784 */
1785 if (!adapter->ha) {
1786 scp->result = (DID_BAD_TARGET << 16);
1787 return NULL;
1788 }
1789
1790 /*
1791 * Allocate a SCB and initialize mailbox
1792 */
1793 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1794 scp->result = (DID_ERROR << 16);
1795 *busy = 1;
1796 return NULL;
1797 }
1798
1799 ccb = (mbox_ccb_t *)scb->ccb;
1800 scb->dev_channel = 0xFF;
1801 scb->dev_target = target;
1802 ccb->raw_mbox[0] = CLUSTER_CMD;
1803 ccb->raw_mbox[2] = (scp->cmnd[0] == RESERVE) ?
1804 RESERVE_LD : RELEASE_LD;
1805
1806 ccb->raw_mbox[3] = target;
1807 scb->dma_direction = scp->sc_data_direction;
1808
1809 return scb;
1810
1811 default:
1812 scp->result = (DID_BAD_TARGET << 16);
1813 return NULL;
1814 }
1815 }
1816 else { // Passthru device commands
1817
1818 // Do not allow access to target id > 15 or LUN > 7
1819 if (target > 15 || SCP2LUN(scp) > 7) {
1820 scp->result = (DID_BAD_TARGET << 16);
1821 return NULL;
1822 }
1823
1824 // if fast load option was set and scan for last device is
1825 // over, reset the fast_load flag so that during a possible
1826 // next scan, devices can be made available
1827 if (rdev->fast_load && (target == 15) &&
1828 (SCP2CHANNEL(scp) == adapter->max_channel -1)) {
1829
1830 con_log(CL_ANN, (KERN_INFO
1831 "megaraid[%d]: physical device scan re-enabled\n",
1832 adapter->host->host_no));
1833 rdev->fast_load = 0;
1834 }
1835
1836 /*
1837 * Display the channel scan for physical devices
1838 */
1839 if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) {
1840
1841 ss = rdev->fast_load ? skip : scan;
1842
1843 con_log(CL_ANN, (KERN_INFO
1844 "scsi[%d]: %s scsi channel %d [Phy %d]",
1845 adapter->host->host_no, ss, SCP2CHANNEL(scp),
1846 channel));
1847
1848 con_log(CL_ANN, (
1849 " for non-raid devices\n"));
1850
1851 rdev->last_disp |= (1L << SCP2CHANNEL(scp));
1852 }
1853
1854 // disable channel sweep if fast load option given
1855 if (rdev->fast_load) {
1856 scp->result = (DID_BAD_TARGET << 16);
1857 return NULL;
1858 }
1859
1860 // Allocate a SCB and initialize passthru
1861 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1862 scp->result = (DID_ERROR << 16);
1863 *busy = 1;
1864 return NULL;
1865 }
1866
1867 ccb = (mbox_ccb_t *)scb->ccb;
1868 scb->dev_channel = channel;
1869 scb->dev_target = target;
1870 scb->dma_direction = scp->sc_data_direction;
1871 mbox = ccb->mbox;
1872 mbox64 = ccb->mbox64;
1873
1874 // Does this firmware support extended CDBs
1875 if (adapter->max_cdb_sz == 16) {
1876 mbox->cmd = MBOXCMD_EXTPTHRU;
1877
1878 megaraid_mbox_prepare_epthru(adapter, scb, scp);
1879
1880 mbox64->xferaddr_lo = (uint32_t)ccb->epthru_dma_h;
1881 mbox64->xferaddr_hi = 0;
1882 mbox->xferaddr = 0xFFFFFFFF;
1883 }
1884 else {
1885 mbox->cmd = MBOXCMD_PASSTHRU64;
1886
1887 megaraid_mbox_prepare_pthru(adapter, scb, scp);
1888
1889 mbox64->xferaddr_lo = (uint32_t)ccb->pthru_dma_h;
1890 mbox64->xferaddr_hi = 0;
1891 mbox->xferaddr = 0xFFFFFFFF;
1892 }
1893 return scb;
1894 }
1895
1896 // NOT REACHED
1897 }
1898
1899
1900 /**
1901 * megaraid_mbox_runpendq - execute commands queued in the pending queue
1902 * @adapter : controller's soft state
1903 * @scb_q : SCB to be queued in the pending list
1904 *
1905 * Scan the pending list for commands which are not yet issued and try to
1906 * post to the controller. The SCB can be a null pointer, which would indicate
1907 * no SCB to be queue, just try to execute the ones in the pending list.
1908 *
1909 * NOTE: We do not actually traverse the pending list. The SCBs are plucked
1910 * out from the head of the pending list. If it is successfully issued, the
1911 * next SCB is at the head now.
1912 */
1913 static void
1914 megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q)
1915 {
1916 scb_t *scb;
1917 unsigned long flags;
1918
1919 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1920
1921 if (scb_q) {
1922 scb_q->state = SCB_PENDQ;
1923 list_add_tail(&scb_q->list, &adapter->pend_list);
1924 }
1925
1926 // if the adapter in not in quiescent mode, post the commands to FW
1927 if (adapter->quiescent) {
1928 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1929 return;
1930 }
1931
1932 while (!list_empty(&adapter->pend_list)) {
1933
1934 assert_spin_locked(PENDING_LIST_LOCK(adapter));
1935
1936 scb = list_entry(adapter->pend_list.next, scb_t, list);
1937
1938 // remove the scb from the pending list and try to
1939 // issue. If we are unable to issue it, put back in
1940 // the pending list and return
1941
1942 list_del_init(&scb->list);
1943
1944 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1945
1946 // if mailbox was busy, return SCB back to pending
1947 // list. Make sure to add at the head, since that's
1948 // where it would have been removed from
1949
1950 scb->state = SCB_ISSUED;
1951
1952 if (mbox_post_cmd(adapter, scb) != 0) {
1953
1954 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1955
1956 scb->state = SCB_PENDQ;
1957
1958 list_add(&scb->list, &adapter->pend_list);
1959
1960 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter),
1961 flags);
1962
1963 return;
1964 }
1965
1966 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1967 }
1968
1969 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1970
1971
1972 return;
1973 }
1974
1975
1976 /**
1977 * megaraid_mbox_prepare_pthru - prepare a command for physical devices
1978 * @adapter : pointer to controller's soft state
1979 * @scb : scsi control block
1980 * @scp : scsi command from the mid-layer
1981 *
1982 * Prepare a command for the scsi physical devices.
1983 */
1984 static void
1985 megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
1986 struct scsi_cmnd *scp)
1987 {
1988 mbox_ccb_t *ccb;
1989 mraid_passthru_t *pthru;
1990 uint8_t channel;
1991 uint8_t target;
1992
1993 ccb = (mbox_ccb_t *)scb->ccb;
1994 pthru = ccb->pthru;
1995 channel = scb->dev_channel;
1996 target = scb->dev_target;
1997
1998 // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout
1999 pthru->timeout = 4;
2000 pthru->ars = 1;
2001 pthru->islogical = 0;
2002 pthru->channel = 0;
2003 pthru->target = (channel << 4) | target;
2004 pthru->logdrv = SCP2LUN(scp);
2005 pthru->reqsenselen = 14;
2006 pthru->cdblen = scp->cmd_len;
2007
2008 memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
2009
2010 if (scsi_bufflen(scp)) {
2011 pthru->dataxferlen = scsi_bufflen(scp);
2012 pthru->dataxferaddr = ccb->sgl_dma_h;
2013 pthru->numsge = megaraid_mbox_mksgl(adapter, scb);
2014 }
2015 else {
2016 pthru->dataxferaddr = 0;
2017 pthru->dataxferlen = 0;
2018 pthru->numsge = 0;
2019 }
2020 return;
2021 }
2022
2023
2024 /**
2025 * megaraid_mbox_prepare_epthru - prepare a command for physical devices
2026 * @adapter : pointer to controller's soft state
2027 * @scb : scsi control block
2028 * @scp : scsi command from the mid-layer
2029 *
2030 * Prepare a command for the scsi physical devices. This rountine prepares
2031 * commands for devices which can take extended CDBs (>10 bytes).
2032 */
2033 static void
2034 megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
2035 struct scsi_cmnd *scp)
2036 {
2037 mbox_ccb_t *ccb;
2038 mraid_epassthru_t *epthru;
2039 uint8_t channel;
2040 uint8_t target;
2041
2042 ccb = (mbox_ccb_t *)scb->ccb;
2043 epthru = ccb->epthru;
2044 channel = scb->dev_channel;
2045 target = scb->dev_target;
2046
2047 // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout
2048 epthru->timeout = 4;
2049 epthru->ars = 1;
2050 epthru->islogical = 0;
2051 epthru->channel = 0;
2052 epthru->target = (channel << 4) | target;
2053 epthru->logdrv = SCP2LUN(scp);
2054 epthru->reqsenselen = 14;
2055 epthru->cdblen = scp->cmd_len;
2056
2057 memcpy(epthru->cdb, scp->cmnd, scp->cmd_len);
2058
2059 if (scsi_bufflen(scp)) {
2060 epthru->dataxferlen = scsi_bufflen(scp);
2061 epthru->dataxferaddr = ccb->sgl_dma_h;
2062 epthru->numsge = megaraid_mbox_mksgl(adapter, scb);
2063 }
2064 else {
2065 epthru->dataxferaddr = 0;
2066 epthru->dataxferlen = 0;
2067 epthru->numsge = 0;
2068 }
2069 return;
2070 }
2071
2072
2073 /**
2074 * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs
2075 * @adapter : controller's soft state
2076 *
2077 * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the
2078 * completed command and put them on the completed list for later processing.
2079 *
2080 * Returns: 1 if the interrupt is valid, 0 otherwise
2081 */
2082 static int
2083 megaraid_ack_sequence(adapter_t *adapter)
2084 {
2085 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2086 mbox_t *mbox;
2087 scb_t *scb;
2088 uint8_t nstatus;
2089 uint8_t completed[MBOX_MAX_FIRMWARE_STATUS];
2090 struct list_head clist;
2091 int handled;
2092 uint32_t dword;
2093 unsigned long flags;
2094 int i, j;
2095
2096
2097 mbox = raid_dev->mbox;
2098
2099 // move the SCBs from the firmware completed array to our local list
2100 INIT_LIST_HEAD(&clist);
2101
2102 // loop till F/W has more commands for us to complete
2103 handled = 0;
2104 spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags);
2105 do {
2106 /*
2107 * Check if a valid interrupt is pending. If found, force the
2108 * interrupt line low.
2109 */
2110 dword = RDOUTDOOR(raid_dev);
2111 if (dword != 0x10001234) break;
2112
2113 handled = 1;
2114
2115 WROUTDOOR(raid_dev, 0x10001234);
2116
2117 nstatus = 0;
2118 // wait for valid numstatus to post
2119 for (i = 0; i < 0xFFFFF; i++) {
2120 if (mbox->numstatus != 0xFF) {
2121 nstatus = mbox->numstatus;
2122 break;
2123 }
2124 rmb();
2125 }
2126 mbox->numstatus = 0xFF;
2127
2128 adapter->outstanding_cmds -= nstatus;
2129
2130 for (i = 0; i < nstatus; i++) {
2131
2132 // wait for valid command index to post
2133 for (j = 0; j < 0xFFFFF; j++) {
2134 if (mbox->completed[i] != 0xFF) break;
2135 rmb();
2136 }
2137 completed[i] = mbox->completed[i];
2138 mbox->completed[i] = 0xFF;
2139
2140 if (completed[i] == 0xFF) {
2141 con_log(CL_ANN, (KERN_CRIT
2142 "megaraid: command posting timed out\n"));
2143
2144 BUG();
2145 continue;
2146 }
2147
2148 // Get SCB associated with this command id
2149 if (completed[i] >= MBOX_MAX_SCSI_CMDS) {
2150 // a cmm command
2151 scb = adapter->uscb_list + (completed[i] -
2152 MBOX_MAX_SCSI_CMDS);
2153 }
2154 else {
2155 // an os command
2156 scb = adapter->kscb_list + completed[i];
2157 }
2158
2159 scb->status = mbox->status;
2160 list_add_tail(&scb->list, &clist);
2161 }
2162
2163 // Acknowledge interrupt
2164 WRINDOOR(raid_dev, 0x02);
2165
2166 } while(1);
2167
2168 spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
2169
2170
2171 // put the completed commands in the completed list. DPC would
2172 // complete these commands later
2173 spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2174
2175 list_splice(&clist, &adapter->completed_list);
2176
2177 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2178
2179
2180 // schedule the DPC if there is some work for it
2181 if (handled)
2182 tasklet_schedule(&adapter->dpc_h);
2183
2184 return handled;
2185 }
2186
2187
2188 /**
2189 * megaraid_isr - isr for memory based mailbox based controllers
2190 * @irq : irq
2191 * @devp : pointer to our soft state
2192 *
2193 * Interrupt service routine for memory-mapped mailbox controllers.
2194 */
2195 static irqreturn_t
2196 megaraid_isr(int irq, void *devp)
2197 {
2198 adapter_t *adapter = devp;
2199 int handled;
2200
2201 handled = megaraid_ack_sequence(adapter);
2202
2203 /* Loop through any pending requests */
2204 if (!adapter->quiescent) {
2205 megaraid_mbox_runpendq(adapter, NULL);
2206 }
2207
2208 return IRQ_RETVAL(handled);
2209 }
2210
2211
2212 /**
2213 * megaraid_mbox_sync_scb - sync kernel buffers
2214 * @adapter : controller's soft state
2215 * @scb : pointer to the resource packet
2216 *
2217 * DMA sync if required.
2218 */
2219 static void
2220 megaraid_mbox_sync_scb(adapter_t *adapter, scb_t *scb)
2221 {
2222 mbox_ccb_t *ccb;
2223
2224 ccb = (mbox_ccb_t *)scb->ccb;
2225
2226 if (scb->dma_direction == PCI_DMA_FROMDEVICE)
2227 pci_dma_sync_sg_for_cpu(adapter->pdev,
2228 scsi_sglist(scb->scp),
2229 scsi_sg_count(scb->scp),
2230 PCI_DMA_FROMDEVICE);
2231
2232 scsi_dma_unmap(scb->scp);
2233 return;
2234 }
2235
2236
2237 /**
2238 * megaraid_mbox_dpc - the tasklet to complete the commands from completed list
2239 * @devp : pointer to HBA soft state
2240 *
2241 * Pick up the commands from the completed list and send back to the owners.
2242 * This is a reentrant function and does not assume any locks are held while
2243 * it is being called.
2244 */
2245 static void
2246 megaraid_mbox_dpc(unsigned long devp)
2247 {
2248 adapter_t *adapter = (adapter_t *)devp;
2249 mraid_device_t *raid_dev;
2250 struct list_head clist;
2251 struct scatterlist *sgl;
2252 scb_t *scb;
2253 scb_t *tmp;
2254 struct scsi_cmnd *scp;
2255 mraid_passthru_t *pthru;
2256 mraid_epassthru_t *epthru;
2257 mbox_ccb_t *ccb;
2258 int islogical;
2259 int pdev_index;
2260 int pdev_state;
2261 mbox_t *mbox;
2262 unsigned long flags;
2263 uint8_t c;
2264 int status;
2265 uioc_t *kioc;
2266
2267
2268 if (!adapter) return;
2269
2270 raid_dev = ADAP2RAIDDEV(adapter);
2271
2272 // move the SCBs from the completed list to our local list
2273 INIT_LIST_HEAD(&clist);
2274
2275 spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2276
2277 list_splice_init(&adapter->completed_list, &clist);
2278
2279 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2280
2281
2282 list_for_each_entry_safe(scb, tmp, &clist, list) {
2283
2284 status = scb->status;
2285 scp = scb->scp;
2286 ccb = (mbox_ccb_t *)scb->ccb;
2287 pthru = ccb->pthru;
2288 epthru = ccb->epthru;
2289 mbox = ccb->mbox;
2290
2291 // Make sure f/w has completed a valid command
2292 if (scb->state != SCB_ISSUED) {
2293 con_log(CL_ANN, (KERN_CRIT
2294 "megaraid critical err: invalid command %d:%d:%p\n",
2295 scb->sno, scb->state, scp));
2296 BUG();
2297 continue; // Must never happen!
2298 }
2299
2300 // check for the management command and complete it right away
2301 if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
2302 scb->state = SCB_FREE;
2303 scb->status = status;
2304
2305 // remove from local clist
2306 list_del_init(&scb->list);
2307
2308 kioc = (uioc_t *)scb->gp;
2309 kioc->status = 0;
2310
2311 megaraid_mbox_mm_done(adapter, scb);
2312
2313 continue;
2314 }
2315
2316 // Was an abort issued for this command earlier
2317 if (scb->state & SCB_ABORT) {
2318 con_log(CL_ANN, (KERN_NOTICE
2319 "megaraid: aborted cmd [%x] completed\n",
2320 scb->sno));
2321 }
2322
2323 /*
2324 * If the inquiry came of a disk drive which is not part of
2325 * any RAID array, expose it to the kernel. For this to be
2326 * enabled, user must set the "megaraid_expose_unconf_disks"
2327 * flag to 1 by specifying it on module parameter list.
2328 * This would enable data migration off drives from other
2329 * configurations.
2330 */
2331 islogical = MRAID_IS_LOGICAL(adapter, scp);
2332 if (scp->cmnd[0] == INQUIRY && status == 0 && islogical == 0
2333 && IS_RAID_CH(raid_dev, scb->dev_channel)) {
2334
2335 sgl = scsi_sglist(scp);
2336 if (sg_page(sgl)) {
2337 c = *(unsigned char *) sg_virt(&sgl[0]);
2338 } else {
2339 con_log(CL_ANN, (KERN_WARNING
2340 "megaraid mailbox: invalid sg:%d\n",
2341 __LINE__));
2342 c = 0;
2343 }
2344
2345 if ((c & 0x1F ) == TYPE_DISK) {
2346 pdev_index = (scb->dev_channel * 16) +
2347 scb->dev_target;
2348 pdev_state =
2349 raid_dev->pdrv_state[pdev_index] & 0x0F;
2350
2351 if (pdev_state == PDRV_ONLINE ||
2352 pdev_state == PDRV_FAILED ||
2353 pdev_state == PDRV_RBLD ||
2354 pdev_state == PDRV_HOTSPARE ||
2355 megaraid_expose_unconf_disks == 0) {
2356
2357 status = 0xF0;
2358 }
2359 }
2360 }
2361
2362 // Convert MegaRAID status to Linux error code
2363 switch (status) {
2364
2365 case 0x00:
2366
2367 scp->result = (DID_OK << 16);
2368 break;
2369
2370 case 0x02:
2371
2372 /* set sense_buffer and result fields */
2373 if (mbox->cmd == MBOXCMD_PASSTHRU ||
2374 mbox->cmd == MBOXCMD_PASSTHRU64) {
2375
2376 memcpy(scp->sense_buffer, pthru->reqsensearea,
2377 14);
2378
2379 scp->result = DRIVER_SENSE << 24 |
2380 DID_OK << 16 | CHECK_CONDITION << 1;
2381 }
2382 else {
2383 if (mbox->cmd == MBOXCMD_EXTPTHRU) {
2384
2385 memcpy(scp->sense_buffer,
2386 epthru->reqsensearea, 14);
2387
2388 scp->result = DRIVER_SENSE << 24 |
2389 DID_OK << 16 |
2390 CHECK_CONDITION << 1;
2391 } else {
2392 scp->sense_buffer[0] = 0x70;
2393 scp->sense_buffer[2] = ABORTED_COMMAND;
2394 scp->result = CHECK_CONDITION << 1;
2395 }
2396 }
2397 break;
2398
2399 case 0x08:
2400
2401 scp->result = DID_BUS_BUSY << 16 | status;
2402 break;
2403
2404 default:
2405
2406 /*
2407 * If TEST_UNIT_READY fails, we know RESERVATION_STATUS
2408 * failed
2409 */
2410 if (scp->cmnd[0] == TEST_UNIT_READY) {
2411 scp->result = DID_ERROR << 16 |
2412 RESERVATION_CONFLICT << 1;
2413 }
2414 else
2415 /*
2416 * Error code returned is 1 if Reserve or Release
2417 * failed or the input parameter is invalid
2418 */
2419 if (status == 1 && (scp->cmnd[0] == RESERVE ||
2420 scp->cmnd[0] == RELEASE)) {
2421
2422 scp->result = DID_ERROR << 16 |
2423 RESERVATION_CONFLICT << 1;
2424 }
2425 else {
2426 scp->result = DID_BAD_TARGET << 16 | status;
2427 }
2428 }
2429
2430 // print a debug message for all failed commands
2431 if (status) {
2432 megaraid_mbox_display_scb(adapter, scb);
2433 }
2434
2435 // Free our internal resources and call the mid-layer callback
2436 // routine
2437 megaraid_mbox_sync_scb(adapter, scb);
2438
2439 // remove from local clist
2440 list_del_init(&scb->list);
2441
2442 // put back in free list
2443 megaraid_dealloc_scb(adapter, scb);
2444
2445 // send the scsi packet back to kernel
2446 scp->scsi_done(scp);
2447 }
2448
2449 return;
2450 }
2451
2452
2453 /**
2454 * megaraid_abort_handler - abort the scsi command
2455 * @scp : command to be aborted
2456 *
2457 * Abort a previous SCSI request. Only commands on the pending list can be
2458 * aborted. All the commands issued to the F/W must complete.
2459 **/
2460 static int
2461 megaraid_abort_handler(struct scsi_cmnd *scp)
2462 {
2463 adapter_t *adapter;
2464 mraid_device_t *raid_dev;
2465 scb_t *scb;
2466 scb_t *tmp;
2467 int found;
2468 unsigned long flags;
2469 int i;
2470
2471
2472 adapter = SCP2ADAPTER(scp);
2473 raid_dev = ADAP2RAIDDEV(adapter);
2474
2475 con_log(CL_ANN, (KERN_WARNING
2476 "megaraid: aborting cmd=%x <c=%d t=%d l=%d>\n",
2477 scp->cmnd[0], SCP2CHANNEL(scp),
2478 SCP2TARGET(scp), SCP2LUN(scp)));
2479
2480 // If FW has stopped responding, simply return failure
2481 if (raid_dev->hw_error) {
2482 con_log(CL_ANN, (KERN_NOTICE
2483 "megaraid: hw error, not aborting\n"));
2484 return FAILED;
2485 }
2486
2487 // There might a race here, where the command was completed by the
2488 // firmware and now it is on the completed list. Before we could
2489 // complete the command to the kernel in dpc, the abort came.
2490 // Find out if this is the case to avoid the race.
2491 scb = NULL;
2492 spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2493 list_for_each_entry_safe(scb, tmp, &adapter->completed_list, list) {
2494
2495 if (scb->scp == scp) { // Found command
2496
2497 list_del_init(&scb->list); // from completed list
2498
2499 con_log(CL_ANN, (KERN_WARNING
2500 "megaraid: %d[%d:%d], abort from completed list\n",
2501 scb->sno, scb->dev_channel, scb->dev_target));
2502
2503 scp->result = (DID_ABORT << 16);
2504 scp->scsi_done(scp);
2505
2506 megaraid_dealloc_scb(adapter, scb);
2507
2508 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter),
2509 flags);
2510
2511 return SUCCESS;
2512 }
2513 }
2514 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2515
2516
2517 // Find out if this command is still on the pending list. If it is and
2518 // was never issued, abort and return success. If the command is owned
2519 // by the firmware, we must wait for it to complete by the FW.
2520 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
2521 list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
2522
2523 if (scb->scp == scp) { // Found command
2524
2525 list_del_init(&scb->list); // from pending list
2526
2527 ASSERT(!(scb->state & SCB_ISSUED));
2528
2529 con_log(CL_ANN, (KERN_WARNING
2530 "megaraid abort: [%d:%d], driver owner\n",
2531 scb->dev_channel, scb->dev_target));
2532
2533 scp->result = (DID_ABORT << 16);
2534 scp->scsi_done(scp);
2535
2536 megaraid_dealloc_scb(adapter, scb);
2537
2538 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter),
2539 flags);
2540
2541 return SUCCESS;
2542 }
2543 }
2544 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
2545
2546
2547 // Check do we even own this command, in which case this would be
2548 // owned by the firmware. The only way to locate the FW scb is to
2549 // traverse through the list of all SCB, since driver does not
2550 // maintain these SCBs on any list
2551 found = 0;
2552 spin_lock_irq(&adapter->lock);
2553 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
2554 scb = adapter->kscb_list + i;
2555
2556 if (scb->scp == scp) {
2557
2558 found = 1;
2559
2560 if (!(scb->state & SCB_ISSUED)) {
2561 con_log(CL_ANN, (KERN_WARNING
2562 "megaraid abort: %d[%d:%d], invalid state\n",
2563 scb->sno, scb->dev_channel, scb->dev_target));
2564 BUG();
2565 }
2566 else {
2567 con_log(CL_ANN, (KERN_WARNING
2568 "megaraid abort: %d[%d:%d], fw owner\n",
2569 scb->sno, scb->dev_channel, scb->dev_target));
2570 }
2571 }
2572 }
2573 spin_unlock_irq(&adapter->lock);
2574
2575 if (!found) {
2576 con_log(CL_ANN, (KERN_WARNING "megaraid abort: do now own\n"));
2577
2578 // FIXME: Should there be a callback for this command?
2579 return SUCCESS;
2580 }
2581
2582 // We cannot actually abort a command owned by firmware, return
2583 // failure and wait for reset. In host reset handler, we will find out
2584 // if the HBA is still live
2585 return FAILED;
2586 }
2587
2588 /**
2589 * megaraid_reset_handler - device reset hadler for mailbox based driver
2590 * @scp : reference command
2591 *
2592 * Reset handler for the mailbox based controller. First try to find out if
2593 * the FW is still live, in which case the outstanding commands counter mut go
2594 * down to 0. If that happens, also issue the reservation reset command to
2595 * relinquish (possible) reservations on the logical drives connected to this
2596 * host.
2597 **/
2598 static int
2599 megaraid_reset_handler(struct scsi_cmnd *scp)
2600 {
2601 adapter_t *adapter;
2602 scb_t *scb;
2603 scb_t *tmp;
2604 mraid_device_t *raid_dev;
2605 unsigned long flags;
2606 uint8_t raw_mbox[sizeof(mbox_t)];
2607 int rval;
2608 int recovery_window;
2609 int recovering;
2610 int i;
2611 uioc_t *kioc;
2612
2613 adapter = SCP2ADAPTER(scp);
2614 raid_dev = ADAP2RAIDDEV(adapter);
2615
2616 // return failure if adapter is not responding
2617 if (raid_dev->hw_error) {
2618 con_log(CL_ANN, (KERN_NOTICE
2619 "megaraid: hw error, cannot reset\n"));
2620 return FAILED;
2621 }
2622
2623
2624 // Under exceptional conditions, FW can take up to 3 minutes to
2625 // complete command processing. Wait for additional 2 minutes for the
2626 // pending commands counter to go down to 0. If it doesn't, let the
2627 // controller be marked offline
2628 // Also, reset all the commands currently owned by the driver
2629 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
2630 list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
2631 list_del_init(&scb->list); // from pending list
2632
2633 if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
2634 con_log(CL_ANN, (KERN_WARNING
2635 "megaraid: IOCTL packet with %d[%d:%d] being reset\n",
2636 scb->sno, scb->dev_channel, scb->dev_target));
2637
2638 scb->status = -1;
2639
2640 kioc = (uioc_t *)scb->gp;
2641 kioc->status = -EFAULT;
2642
2643 megaraid_mbox_mm_done(adapter, scb);
2644 } else {
2645 if (scb->scp == scp) { // Found command
2646 con_log(CL_ANN, (KERN_WARNING
2647 "megaraid: %d[%d:%d], reset from pending list\n",
2648 scb->sno, scb->dev_channel, scb->dev_target));
2649 } else {
2650 con_log(CL_ANN, (KERN_WARNING
2651 "megaraid: IO packet with %d[%d:%d] being reset\n",
2652 scb->sno, scb->dev_channel, scb->dev_target));
2653 }
2654
2655 scb->scp->result = (DID_RESET << 16);
2656 scb->scp->scsi_done(scb->scp);
2657
2658 megaraid_dealloc_scb(adapter, scb);
2659 }
2660 }
2661 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
2662
2663 if (adapter->outstanding_cmds) {
2664 con_log(CL_ANN, (KERN_NOTICE
2665 "megaraid: %d outstanding commands. Max wait %d sec\n",
2666 adapter->outstanding_cmds,
2667 (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT)));
2668 }
2669
2670 recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
2671
2672 recovering = adapter->outstanding_cmds;
2673
2674 for (i = 0; i < recovery_window; i++) {
2675
2676 megaraid_ack_sequence(adapter);
2677
2678 // print a message once every 5 seconds only
2679 if (!(i % 5)) {
2680 con_log(CL_ANN, (
2681 "megaraid mbox: Wait for %d commands to complete:%d\n",
2682 adapter->outstanding_cmds,
2683 (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
2684 }
2685
2686 // bailout if no recovery happened in reset time
2687 if (adapter->outstanding_cmds == 0) {
2688 break;
2689 }
2690
2691 msleep(1000);
2692 }
2693
2694 spin_lock(&adapter->lock);
2695
2696 // If still outstanding commands, bail out
2697 if (adapter->outstanding_cmds) {
2698 con_log(CL_ANN, (KERN_WARNING
2699 "megaraid mbox: critical hardware error!\n"));
2700
2701 raid_dev->hw_error = 1;
2702
2703 rval = FAILED;
2704 goto out;
2705 }
2706 else {
2707 con_log(CL_ANN, (KERN_NOTICE
2708 "megaraid mbox: reset sequence completed successfully\n"));
2709 }
2710
2711
2712 // If the controller supports clustering, reset reservations
2713 if (!adapter->ha) {
2714 rval = SUCCESS;
2715 goto out;
2716 }
2717
2718 // clear reservations if any
2719 raw_mbox[0] = CLUSTER_CMD;
2720 raw_mbox[2] = RESET_RESERVATIONS;
2721
2722 rval = SUCCESS;
2723 if (mbox_post_sync_cmd_fast(adapter, raw_mbox) == 0) {
2724 con_log(CL_ANN,
2725 (KERN_INFO "megaraid: reservation reset\n"));
2726 }
2727 else {
2728 rval = FAILED;
2729 con_log(CL_ANN, (KERN_WARNING
2730 "megaraid: reservation reset failed\n"));
2731 }
2732
2733 out:
2734 spin_unlock_irq(&adapter->lock);
2735 return rval;
2736 }
2737
2738 /*
2739 * START: internal commands library
2740 *
2741 * This section of the driver has the common routine used by the driver and
2742 * also has all the FW routines
2743 */
2744
2745 /**
2746 * mbox_post_sync_cmd() - blocking command to the mailbox based controllers
2747 * @adapter : controller's soft state
2748 * @raw_mbox : the mailbox
2749 *
2750 * Issue a scb in synchronous and non-interrupt mode for mailbox based
2751 * controllers.
2752 */
2753 static int
2754 mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[])
2755 {
2756 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2757 mbox64_t *mbox64;
2758 mbox_t *mbox;
2759 uint8_t status;
2760 int i;
2761
2762
2763 mbox64 = raid_dev->mbox64;
2764 mbox = raid_dev->mbox;
2765
2766 /*
2767 * Wait until mailbox is free
2768 */
2769 if (megaraid_busywait_mbox(raid_dev) != 0)
2770 goto blocked_mailbox;
2771
2772 /*
2773 * Copy mailbox data into host structure
2774 */
2775 memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
2776 mbox->cmdid = 0xFE;
2777 mbox->busy = 1;
2778 mbox->poll = 0;
2779 mbox->ack = 0;
2780 mbox->numstatus = 0xFF;
2781 mbox->status = 0xFF;
2782
2783 wmb();
2784 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
2785
2786 // wait for maximum 1 second for status to post. If the status is not
2787 // available within 1 second, assume FW is initializing and wait
2788 // for an extended amount of time
2789 if (mbox->numstatus == 0xFF) { // status not yet available
2790 udelay(25);
2791
2792 for (i = 0; mbox->numstatus == 0xFF && i < 1000; i++) {
2793 rmb();
2794 msleep(1);
2795 }
2796
2797
2798 if (i == 1000) {
2799 con_log(CL_ANN, (KERN_NOTICE
2800 "megaraid mailbox: wait for FW to boot "));
2801
2802 for (i = 0; (mbox->numstatus == 0xFF) &&
2803 (i < MBOX_RESET_WAIT); i++) {
2804 rmb();
2805 con_log(CL_ANN, ("\b\b\b\b\b[%03d]",
2806 MBOX_RESET_WAIT - i));
2807 msleep(1000);
2808 }
2809
2810 if (i == MBOX_RESET_WAIT) {
2811
2812 con_log(CL_ANN, (
2813 "\nmegaraid mailbox: status not available\n"));
2814
2815 return -1;
2816 }
2817 con_log(CL_ANN, ("\b\b\b\b\b[ok] \n"));
2818 }
2819 }
2820
2821 // wait for maximum 1 second for poll semaphore
2822 if (mbox->poll != 0x77) {
2823 udelay(25);
2824
2825 for (i = 0; (mbox->poll != 0x77) && (i < 1000); i++) {
2826 rmb();
2827 msleep(1);
2828 }
2829
2830 if (i == 1000) {
2831 con_log(CL_ANN, (KERN_WARNING
2832 "megaraid mailbox: could not get poll semaphore\n"));
2833 return -1;
2834 }
2835 }
2836
2837 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2);
2838 wmb();
2839
2840 // wait for maximum 1 second for acknowledgement
2841 if (RDINDOOR(raid_dev) & 0x2) {
2842 udelay(25);
2843
2844 for (i = 0; (RDINDOOR(raid_dev) & 0x2) && (i < 1000); i++) {
2845 rmb();
2846 msleep(1);
2847 }
2848
2849 if (i == 1000) {
2850 con_log(CL_ANN, (KERN_WARNING
2851 "megaraid mailbox: could not acknowledge\n"));
2852 return -1;
2853 }
2854 }
2855 mbox->poll = 0;
2856 mbox->ack = 0x77;
2857
2858 status = mbox->status;
2859
2860 // invalidate the completed command id array. After command
2861 // completion, firmware would write the valid id.
2862 mbox->numstatus = 0xFF;
2863 mbox->status = 0xFF;
2864 for (i = 0; i < MBOX_MAX_FIRMWARE_STATUS; i++) {
2865 mbox->completed[i] = 0xFF;
2866 }
2867
2868 return status;
2869
2870 blocked_mailbox:
2871
2872 con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n") );
2873 return -1;
2874 }
2875
2876
2877 /**
2878 * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers
2879 * @adapter : controller's soft state
2880 * @raw_mbox : the mailbox
2881 *
2882 * Issue a scb in synchronous and non-interrupt mode for mailbox based
2883 * controllers. This is a faster version of the synchronous command and
2884 * therefore can be called in interrupt-context as well.
2885 */
2886 static int
2887 mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
2888 {
2889 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2890 mbox_t *mbox;
2891 long i;
2892
2893
2894 mbox = raid_dev->mbox;
2895
2896 // return immediately if the mailbox is busy
2897 if (mbox->busy) return -1;
2898
2899 // Copy mailbox data into host structure
2900 memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 14);
2901 mbox->cmdid = 0xFE;
2902 mbox->busy = 1;
2903 mbox->poll = 0;
2904 mbox->ack = 0;
2905 mbox->numstatus = 0xFF;
2906 mbox->status = 0xFF;
2907
2908 wmb();
2909 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
2910
2911 for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) {
2912 if (mbox->numstatus != 0xFF) break;
2913 rmb();
2914 udelay(MBOX_SYNC_DELAY_200);
2915 }
2916
2917 if (i == MBOX_SYNC_WAIT_CNT) {
2918 // We may need to re-calibrate the counter
2919 con_log(CL_ANN, (KERN_CRIT
2920 "megaraid: fast sync command timed out\n"));
2921 }
2922
2923 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2);
2924 wmb();
2925
2926 return mbox->status;
2927 }
2928
2929
2930 /**
2931 * megaraid_busywait_mbox() - Wait until the controller's mailbox is available
2932 * @raid_dev : RAID device (HBA) soft state
2933 *
2934 * Wait until the controller's mailbox is available to accept more commands.
2935 * Wait for at most 1 second.
2936 */
2937 static int
2938 megaraid_busywait_mbox(mraid_device_t *raid_dev)
2939 {
2940 mbox_t *mbox = raid_dev->mbox;
2941 int i = 0;
2942
2943 if (mbox->busy) {
2944 udelay(25);
2945 for (i = 0; mbox->busy && i < 1000; i++)
2946 msleep(1);
2947 }
2948
2949 if (i < 1000) return 0;
2950 else return -1;
2951 }
2952
2953
2954 /**
2955 * megaraid_mbox_product_info - some static information about the controller
2956 * @adapter : our soft state
2957 *
2958 * Issue commands to the controller to grab some parameters required by our
2959 * caller.
2960 */
2961 static int
2962 megaraid_mbox_product_info(adapter_t *adapter)
2963 {
2964 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2965 mbox_t *mbox;
2966 uint8_t raw_mbox[sizeof(mbox_t)];
2967 mraid_pinfo_t *pinfo;
2968 dma_addr_t pinfo_dma_h;
2969 mraid_inquiry3_t *mraid_inq3;
2970 int i;
2971
2972
2973 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
2974 mbox = (mbox_t *)raw_mbox;
2975
2976 /*
2977 * Issue an ENQUIRY3 command to find out certain adapter parameters,
2978 * e.g., max channels, max commands etc.
2979 */
2980 pinfo = pci_alloc_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
2981 &pinfo_dma_h);
2982
2983 if (pinfo == NULL) {
2984 con_log(CL_ANN, (KERN_WARNING
2985 "megaraid: out of memory, %s %d\n", __func__,
2986 __LINE__));
2987
2988 return -1;
2989 }
2990 memset(pinfo, 0, sizeof(mraid_pinfo_t));
2991
2992 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
2993 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
2994
2995 raw_mbox[0] = FC_NEW_CONFIG;
2996 raw_mbox[2] = NC_SUBOP_ENQUIRY3;
2997 raw_mbox[3] = ENQ3_GET_SOLICITED_FULL;
2998
2999 // Issue the command
3000 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3001
3002 con_log(CL_ANN, (KERN_WARNING "megaraid: Inquiry3 failed\n"));
3003
3004 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
3005 pinfo, pinfo_dma_h);
3006
3007 return -1;
3008 }
3009
3010 /*
3011 * Collect information about state of each physical drive
3012 * attached to the controller. We will expose all the disks
3013 * which are not part of RAID
3014 */
3015 mraid_inq3 = (mraid_inquiry3_t *)adapter->ibuf;
3016 for (i = 0; i < MBOX_MAX_PHYSICAL_DRIVES; i++) {
3017 raid_dev->pdrv_state[i] = mraid_inq3->pdrv_state[i];
3018 }
3019
3020 /*
3021 * Get product info for information like number of channels,
3022 * maximum commands supported.
3023 */
3024 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3025 mbox->xferaddr = (uint32_t)pinfo_dma_h;
3026
3027 raw_mbox[0] = FC_NEW_CONFIG;
3028 raw_mbox[2] = NC_SUBOP_PRODUCT_INFO;
3029
3030 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3031
3032 con_log(CL_ANN, (KERN_WARNING
3033 "megaraid: product info failed\n"));
3034
3035 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
3036 pinfo, pinfo_dma_h);
3037
3038 return -1;
3039 }
3040
3041 /*
3042 * Setup some parameters for host, as required by our caller
3043 */
3044 adapter->max_channel = pinfo->nchannels;
3045
3046 /*
3047 * we will export all the logical drives on a single channel.
3048 * Add 1 since inquires do not come for inititor ID
3049 */
3050 adapter->max_target = MAX_LOGICAL_DRIVES_40LD + 1;
3051 adapter->max_lun = 8; // up to 8 LUNs for non-disk devices
3052
3053 /*
3054 * These are the maximum outstanding commands for the scsi-layer
3055 */
3056 adapter->max_cmds = MBOX_MAX_SCSI_CMDS;
3057
3058 memset(adapter->fw_version, 0, VERSION_SIZE);
3059 memset(adapter->bios_version, 0, VERSION_SIZE);
3060
3061 memcpy(adapter->fw_version, pinfo->fw_version, 4);
3062 adapter->fw_version[4] = 0;
3063
3064 memcpy(adapter->bios_version, pinfo->bios_version, 4);
3065 adapter->bios_version[4] = 0;
3066
3067 con_log(CL_ANN, (KERN_NOTICE
3068 "megaraid: fw version:[%s] bios version:[%s]\n",
3069 adapter->fw_version, adapter->bios_version));
3070
3071 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t), pinfo,
3072 pinfo_dma_h);
3073
3074 return 0;
3075 }
3076
3077
3078
3079 /**
3080 * megaraid_mbox_extended_cdb - check for support for extended CDBs
3081 * @adapter : soft state for the controller
3082 *
3083 * This routine check whether the controller in question supports extended
3084 * ( > 10 bytes ) CDBs.
3085 */
3086 static int
3087 megaraid_mbox_extended_cdb(adapter_t *adapter)
3088 {
3089 mbox_t *mbox;
3090 uint8_t raw_mbox[sizeof(mbox_t)];
3091 int rval;
3092
3093 mbox = (mbox_t *)raw_mbox;
3094
3095 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3096 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3097
3098 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3099
3100 raw_mbox[0] = MAIN_MISC_OPCODE;
3101 raw_mbox[2] = SUPPORT_EXT_CDB;
3102
3103 /*
3104 * Issue the command
3105 */
3106 rval = 0;
3107 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3108 rval = -1;
3109 }
3110
3111 return rval;
3112 }
3113
3114
3115 /**
3116 * megaraid_mbox_support_ha - Do we support clustering
3117 * @adapter : soft state for the controller
3118 * @init_id : ID of the initiator
3119 *
3120 * Determine if the firmware supports clustering and the ID of the initiator.
3121 */
3122 static int
3123 megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id)
3124 {
3125 mbox_t *mbox;
3126 uint8_t raw_mbox[sizeof(mbox_t)];
3127 int rval;
3128
3129
3130 mbox = (mbox_t *)raw_mbox;
3131
3132 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3133
3134 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3135
3136 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3137
3138 raw_mbox[0] = GET_TARGET_ID;
3139
3140 // Issue the command
3141 *init_id = 7;
3142 rval = -1;
3143 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3144
3145 *init_id = *(uint8_t *)adapter->ibuf;
3146
3147 con_log(CL_ANN, (KERN_INFO
3148 "megaraid: cluster firmware, initiator ID: %d\n",
3149 *init_id));
3150
3151 rval = 0;
3152 }
3153
3154 return rval;
3155 }
3156
3157
3158 /**
3159 * megaraid_mbox_support_random_del - Do we support random deletion
3160 * @adapter : soft state for the controller
3161 *
3162 * Determine if the firmware supports random deletion.
3163 * Return: 1 is operation supported, 0 otherwise
3164 */
3165 static int
3166 megaraid_mbox_support_random_del(adapter_t *adapter)
3167 {
3168 mbox_t *mbox;
3169 uint8_t raw_mbox[sizeof(mbox_t)];
3170 int rval;
3171
3172 /*
3173 * Newer firmware on Dell CERC expect a different
3174 * random deletion handling, so disable it.
3175 */
3176 if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
3177 adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
3178 adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
3179 adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
3180 (adapter->fw_version[0] > '6' ||
3181 (adapter->fw_version[0] == '6' &&
3182 adapter->fw_version[2] > '6') ||
3183 (adapter->fw_version[0] == '6'
3184 && adapter->fw_version[2] == '6'
3185 && adapter->fw_version[3] > '1'))) {
3186 con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
3187 return 0;
3188 }
3189
3190 mbox = (mbox_t *)raw_mbox;
3191
3192 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3193
3194 raw_mbox[0] = FC_DEL_LOGDRV;
3195 raw_mbox[2] = OP_SUP_DEL_LOGDRV;
3196
3197 // Issue the command
3198 rval = 0;
3199 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3200
3201 con_log(CL_DLEVEL1, ("megaraid: supports random deletion\n"));
3202
3203 rval = 1;
3204 }
3205
3206 return rval;
3207 }
3208
3209
3210 /**
3211 * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware
3212 * @adapter : soft state for the controller
3213 *
3214 * Find out the maximum number of scatter-gather elements supported by the
3215 * firmware.
3216 */
3217 static int
3218 megaraid_mbox_get_max_sg(adapter_t *adapter)
3219 {
3220 mbox_t *mbox;
3221 uint8_t raw_mbox[sizeof(mbox_t)];
3222 int nsg;
3223
3224
3225 mbox = (mbox_t *)raw_mbox;
3226
3227 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3228
3229 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3230
3231 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3232
3233 raw_mbox[0] = MAIN_MISC_OPCODE;
3234 raw_mbox[2] = GET_MAX_SG_SUPPORT;
3235
3236 // Issue the command
3237 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3238 nsg = *(uint8_t *)adapter->ibuf;
3239 }
3240 else {
3241 nsg = MBOX_DEFAULT_SG_SIZE;
3242 }
3243
3244 if (nsg > MBOX_MAX_SG_SIZE) nsg = MBOX_MAX_SG_SIZE;
3245
3246 return nsg;
3247 }
3248
3249
3250 /**
3251 * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels
3252 * @adapter : soft state for the controller
3253 *
3254 * Enumerate the RAID and SCSI channels for ROMB platforms so that channels
3255 * can be exported as regular SCSI channels.
3256 */
3257 static void
3258 megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
3259 {
3260 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3261 mbox_t *mbox;
3262 uint8_t raw_mbox[sizeof(mbox_t)];
3263
3264
3265 mbox = (mbox_t *)raw_mbox;
3266
3267 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3268
3269 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3270
3271 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3272
3273 raw_mbox[0] = CHNL_CLASS;
3274 raw_mbox[2] = GET_CHNL_CLASS;
3275
3276 // Issue the command. If the command fails, all channels are RAID
3277 // channels
3278 raid_dev->channel_class = 0xFF;
3279 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3280 raid_dev->channel_class = *(uint8_t *)adapter->ibuf;
3281 }
3282
3283 return;
3284 }
3285
3286
3287 /**
3288 * megaraid_mbox_flush_cache - flush adapter and disks cache
3289 * @adapter : soft state for the controller
3290 *
3291 * Flush adapter cache followed by disks cache.
3292 */
3293 static void
3294 megaraid_mbox_flush_cache(adapter_t *adapter)
3295 {
3296 mbox_t *mbox;
3297 uint8_t raw_mbox[sizeof(mbox_t)];
3298
3299
3300 mbox = (mbox_t *)raw_mbox;
3301
3302 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3303
3304 raw_mbox[0] = FLUSH_ADAPTER;
3305
3306 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3307 con_log(CL_ANN, ("megaraid: flush adapter failed\n"));
3308 }
3309
3310 raw_mbox[0] = FLUSH_SYSTEM;
3311
3312 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3313 con_log(CL_ANN, ("megaraid: flush disks cache failed\n"));
3314 }
3315
3316 return;
3317 }
3318
3319
3320 /**
3321 * megaraid_mbox_fire_sync_cmd - fire the sync cmd
3322 * @adapter : soft state for the controller
3323 *
3324 * Clears the pending cmds in FW and reinits its RAID structs.
3325 */
3326 static int
3327 megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
3328 {
3329 mbox_t *mbox;
3330 uint8_t raw_mbox[sizeof(mbox_t)];
3331 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3332 mbox64_t *mbox64;
3333 int status = 0;
3334 int i;
3335 uint32_t dword;
3336
3337 mbox = (mbox_t *)raw_mbox;
3338
3339 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3340
3341 raw_mbox[0] = 0xFF;
3342
3343 mbox64 = raid_dev->mbox64;
3344 mbox = raid_dev->mbox;
3345
3346 /* Wait until mailbox is free */
3347 if (megaraid_busywait_mbox(raid_dev) != 0) {
3348 status = 1;
3349 goto blocked_mailbox;
3350 }
3351
3352 /* Copy mailbox data into host structure */
3353 memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
3354 mbox->cmdid = 0xFE;
3355 mbox->busy = 1;
3356 mbox->poll = 0;
3357 mbox->ack = 0;
3358 mbox->numstatus = 0;
3359 mbox->status = 0;
3360
3361 wmb();
3362 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
3363
3364 /* Wait for maximum 1 min for status to post.
3365 * If the Firmware SUPPORTS the ABOVE COMMAND,
3366 * mbox->cmd will be set to 0
3367 * else
3368 * the firmware will reject the command with
3369 * mbox->numstatus set to 1
3370 */
3371
3372 i = 0;
3373 status = 0;
3374 while (!mbox->numstatus && mbox->cmd == 0xFF) {
3375 rmb();
3376 msleep(1);
3377 i++;
3378 if (i > 1000 * 60) {
3379 status = 1;
3380 break;
3381 }
3382 }
3383 if (mbox->numstatus == 1)
3384 status = 1; /*cmd not supported*/
3385
3386 /* Check for interrupt line */
3387 dword = RDOUTDOOR(raid_dev);
3388 WROUTDOOR(raid_dev, dword);
3389 WRINDOOR(raid_dev,2);
3390
3391 return status;
3392
3393 blocked_mailbox:
3394 con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
3395 return status;
3396 }
3397
3398 /**
3399 * megaraid_mbox_display_scb - display SCB information, mostly debug purposes
3400 * @adapter : controller's soft state
3401 * @scb : SCB to be displayed
3402 * @level : debug level for console print
3403 *
3404 * Diplay information about the given SCB iff the current debug level is
3405 * verbose.
3406 */
3407 static void
3408 megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
3409 {
3410 mbox_ccb_t *ccb;
3411 struct scsi_cmnd *scp;
3412 mbox_t *mbox;
3413 int level;
3414 int i;
3415
3416
3417 ccb = (mbox_ccb_t *)scb->ccb;
3418 scp = scb->scp;
3419 mbox = ccb->mbox;
3420
3421 level = CL_DLEVEL3;
3422
3423 con_log(level, (KERN_NOTICE
3424 "megaraid mailbox: status:%#x cmd:%#x id:%#x ", scb->status,
3425 mbox->cmd, scb->sno));
3426
3427 con_log(level, ("sec:%#x lba:%#x addr:%#x ld:%d sg:%d\n",
3428 mbox->numsectors, mbox->lba, mbox->xferaddr, mbox->logdrv,
3429 mbox->numsge));
3430
3431 if (!scp) return;
3432
3433 con_log(level, (KERN_NOTICE "scsi cmnd: "));
3434
3435 for (i = 0; i < scp->cmd_len; i++) {
3436 con_log(level, ("%#2.02x ", scp->cmnd[i]));
3437 }
3438
3439 con_log(level, ("\n"));
3440
3441 return;
3442 }
3443
3444
3445 /**
3446 * megaraid_mbox_setup_device_map - manage device ids
3447 * @adapter : Driver's soft state
3448 *
3449 * Manange the device ids to have an appropriate mapping between the kernel
3450 * scsi addresses and megaraid scsi and logical drive addresses. We export
3451 * scsi devices on their actual addresses, whereas the logical drives are
3452 * exported on a virtual scsi channel.
3453 */
3454 static void
3455 megaraid_mbox_setup_device_map(adapter_t *adapter)
3456 {
3457 uint8_t c;
3458 uint8_t t;
3459
3460 /*
3461 * First fill the values on the logical drive channel
3462 */
3463 for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++)
3464 adapter->device_ids[adapter->max_channel][t] =
3465 (t < adapter->init_id) ? t : t - 1;
3466
3467 adapter->device_ids[adapter->max_channel][adapter->init_id] = 0xFF;
3468
3469 /*
3470 * Fill the values on the physical devices channels
3471 */
3472 for (c = 0; c < adapter->max_channel; c++)
3473 for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++)
3474 adapter->device_ids[c][t] = (c << 8) | t;
3475 }
3476
3477
3478 /*
3479 * END: internal commands library
3480 */
3481
3482 /*
3483 * START: Interface for the common management module
3484 *
3485 * This is the module, which interfaces with the common management module to
3486 * provide support for ioctl and sysfs
3487 */
3488
3489 /**
3490 * megaraid_cmm_register - register with the management module
3491 * @adapter : HBA soft state
3492 *
3493 * Register with the management module, which allows applications to issue
3494 * ioctl calls to the drivers. This interface is used by the management module
3495 * to setup sysfs support as well.
3496 */
3497 static int
3498 megaraid_cmm_register(adapter_t *adapter)
3499 {
3500 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3501 mraid_mmadp_t adp;
3502 scb_t *scb;
3503 mbox_ccb_t *ccb;
3504 int rval;
3505 int i;
3506
3507 // Allocate memory for the base list of scb for management module.
3508 adapter->uscb_list = kcalloc(MBOX_MAX_USER_CMDS, sizeof(scb_t), GFP_KERNEL);
3509
3510 if (adapter->uscb_list == NULL) {
3511 con_log(CL_ANN, (KERN_WARNING
3512 "megaraid: out of memory, %s %d\n", __func__,
3513 __LINE__));
3514 return -1;
3515 }
3516
3517
3518 // Initialize the synchronization parameters for resources for
3519 // commands for management module
3520 INIT_LIST_HEAD(&adapter->uscb_pool);
3521
3522 spin_lock_init(USER_FREE_LIST_LOCK(adapter));
3523
3524
3525
3526 // link all the packets. Note, CCB for commands, coming from the
3527 // commom management module, mailbox physical address are already
3528 // setup by it. We just need placeholder for that in our local command
3529 // control blocks
3530 for (i = 0; i < MBOX_MAX_USER_CMDS; i++) {
3531
3532 scb = adapter->uscb_list + i;
3533 ccb = raid_dev->uccb_list + i;
3534
3535 scb->ccb = (caddr_t)ccb;
3536 ccb->mbox64 = raid_dev->umbox64 + i;
3537 ccb->mbox = &ccb->mbox64->mbox32;
3538 ccb->raw_mbox = (uint8_t *)ccb->mbox;
3539
3540 scb->gp = 0;
3541
3542 // COMMAND ID 0 - (MBOX_MAX_SCSI_CMDS-1) ARE RESERVED FOR
3543 // COMMANDS COMING FROM IO SUBSYSTEM (MID-LAYER)
3544 scb->sno = i + MBOX_MAX_SCSI_CMDS;
3545
3546 scb->scp = NULL;
3547 scb->state = SCB_FREE;
3548 scb->dma_direction = PCI_DMA_NONE;
3549 scb->dma_type = MRAID_DMA_NONE;
3550 scb->dev_channel = -1;
3551 scb->dev_target = -1;
3552
3553 // put scb in the free pool
3554 list_add_tail(&scb->list, &adapter->uscb_pool);
3555 }
3556
3557 adp.unique_id = adapter->unique_id;
3558 adp.drvr_type = DRVRTYPE_MBOX;
3559 adp.drvr_data = (unsigned long)adapter;
3560 adp.pdev = adapter->pdev;
3561 adp.issue_uioc = megaraid_mbox_mm_handler;
3562 adp.timeout = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
3563 adp.max_kioc = MBOX_MAX_USER_CMDS;
3564
3565 if ((rval = mraid_mm_register_adp(&adp)) != 0) {
3566
3567 con_log(CL_ANN, (KERN_WARNING
3568 "megaraid mbox: did not register with CMM\n"));
3569
3570 kfree(adapter->uscb_list);
3571 }
3572
3573 return rval;
3574 }
3575
3576
3577 /**
3578 * megaraid_cmm_unregister - un-register with the management module
3579 * @adapter : HBA soft state
3580 *
3581 * Un-register with the management module.
3582 * FIXME: mgmt module must return failure for unregister if it has pending
3583 * commands in LLD.
3584 */
3585 static int
3586 megaraid_cmm_unregister(adapter_t *adapter)
3587 {
3588 kfree(adapter->uscb_list);
3589 mraid_mm_unregister_adp(adapter->unique_id);
3590 return 0;
3591 }
3592
3593
3594 /**
3595 * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD
3596 * @drvr_data : LLD specific data
3597 * @kioc : CMM interface packet
3598 * @action : command action
3599 *
3600 * This routine is invoked whenever the Common Management Module (CMM) has a
3601 * command for us. The 'action' parameter specifies if this is a new command
3602 * or otherwise.
3603 */
3604 static int
3605 megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action)
3606 {
3607 adapter_t *adapter;
3608
3609 if (action != IOCTL_ISSUE) {
3610 con_log(CL_ANN, (KERN_WARNING
3611 "megaraid: unsupported management action:%#2x\n",
3612 action));
3613 return (-ENOTSUPP);
3614 }
3615
3616 adapter = (adapter_t *)drvr_data;
3617
3618 // make sure this adapter is not being detached right now.
3619 if (atomic_read(&adapter->being_detached)) {
3620 con_log(CL_ANN, (KERN_WARNING
3621 "megaraid: reject management request, detaching\n"));
3622 return (-ENODEV);
3623 }
3624
3625 switch (kioc->opcode) {
3626
3627 case GET_ADAP_INFO:
3628
3629 kioc->status = gather_hbainfo(adapter, (mraid_hba_info_t *)
3630 (unsigned long)kioc->buf_vaddr);
3631
3632 kioc->done(kioc);
3633
3634 return kioc->status;
3635
3636 case MBOX_CMD:
3637
3638 return megaraid_mbox_mm_command(adapter, kioc);
3639
3640 default:
3641 kioc->status = (-EINVAL);
3642 kioc->done(kioc);
3643 return (-EINVAL);
3644 }
3645
3646 return 0; // not reached
3647 }
3648
3649 /**
3650 * megaraid_mbox_mm_command - issues commands routed through CMM
3651 * @adapter : HBA soft state
3652 * @kioc : management command packet
3653 *
3654 * Issues commands, which are routed through the management module.
3655 */
3656 static int
3657 megaraid_mbox_mm_command(adapter_t *adapter, uioc_t *kioc)
3658 {
3659 struct list_head *head = &adapter->uscb_pool;
3660 mbox64_t *mbox64;
3661 uint8_t *raw_mbox;
3662 scb_t *scb;
3663 mbox_ccb_t *ccb;
3664 unsigned long flags;
3665
3666 // detach one scb from free pool
3667 spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags);
3668
3669 if (list_empty(head)) { // should never happen because of CMM
3670
3671 con_log(CL_ANN, (KERN_WARNING
3672 "megaraid mbox: bug in cmm handler, lost resources\n"));
3673
3674 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3675
3676 return (-EINVAL);
3677 }
3678
3679 scb = list_entry(head->next, scb_t, list);
3680 list_del_init(&scb->list);
3681
3682 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3683
3684 scb->state = SCB_ACTIVE;
3685 scb->dma_type = MRAID_DMA_NONE;
3686 scb->dma_direction = PCI_DMA_NONE;
3687
3688 ccb = (mbox_ccb_t *)scb->ccb;
3689 mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf;
3690 raw_mbox = (uint8_t *)&mbox64->mbox32;
3691
3692 memcpy(ccb->mbox64, mbox64, sizeof(mbox64_t));
3693
3694 scb->gp = (unsigned long)kioc;
3695
3696 /*
3697 * If it is a logdrv random delete operation, we have to wait till
3698 * there are no outstanding cmds at the fw and then issue it directly
3699 */
3700 if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) {
3701
3702 if (wait_till_fw_empty(adapter)) {
3703 con_log(CL_ANN, (KERN_NOTICE
3704 "megaraid mbox: LD delete, timed out\n"));
3705
3706 kioc->status = -ETIME;
3707
3708 scb->status = -1;
3709
3710 megaraid_mbox_mm_done(adapter, scb);
3711
3712 return (-ETIME);
3713 }
3714
3715 INIT_LIST_HEAD(&scb->list);
3716
3717 scb->state = SCB_ISSUED;
3718 if (mbox_post_cmd(adapter, scb) != 0) {
3719
3720 con_log(CL_ANN, (KERN_NOTICE
3721 "megaraid mbox: LD delete, mailbox busy\n"));
3722
3723 kioc->status = -EBUSY;
3724
3725 scb->status = -1;
3726
3727 megaraid_mbox_mm_done(adapter, scb);
3728
3729 return (-EBUSY);
3730 }
3731
3732 return 0;
3733 }
3734
3735 // put the command on the pending list and execute
3736 megaraid_mbox_runpendq(adapter, scb);
3737
3738 return 0;
3739 }
3740
3741
3742 static int
3743 wait_till_fw_empty(adapter_t *adapter)
3744 {
3745 unsigned long flags = 0;
3746 int i;
3747
3748
3749 /*
3750 * Set the quiescent flag to stop issuing cmds to FW.
3751 */
3752 spin_lock_irqsave(&adapter->lock, flags);
3753 adapter->quiescent++;
3754 spin_unlock_irqrestore(&adapter->lock, flags);
3755
3756 /*
3757 * Wait till there are no more cmds outstanding at FW. Try for at most
3758 * 60 seconds
3759 */
3760 for (i = 0; i < 60 && adapter->outstanding_cmds; i++) {
3761 con_log(CL_DLEVEL1, (KERN_INFO
3762 "megaraid: FW has %d pending commands\n",
3763 adapter->outstanding_cmds));
3764
3765 msleep(1000);
3766 }
3767
3768 return adapter->outstanding_cmds;
3769 }
3770
3771
3772 /**
3773 * megaraid_mbox_mm_done - callback for CMM commands
3774 * @adapter : HBA soft state
3775 * @scb : completed command
3776 *
3777 * Callback routine for internal commands originated from the management
3778 * module.
3779 */
3780 static void
3781 megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
3782 {
3783 uioc_t *kioc;
3784 mbox64_t *mbox64;
3785 uint8_t *raw_mbox;
3786 unsigned long flags;
3787
3788 kioc = (uioc_t *)scb->gp;
3789 mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf;
3790 mbox64->mbox32.status = scb->status;
3791 raw_mbox = (uint8_t *)&mbox64->mbox32;
3792
3793
3794 // put scb in the free pool
3795 scb->state = SCB_FREE;
3796 scb->scp = NULL;
3797
3798 spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags);
3799
3800 list_add(&scb->list, &adapter->uscb_pool);
3801
3802 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3803
3804 // if a delete logical drive operation succeeded, restart the
3805 // controller
3806 if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) {
3807
3808 adapter->quiescent--;
3809
3810 megaraid_mbox_runpendq(adapter, NULL);
3811 }
3812
3813 kioc->done(kioc);
3814
3815 return;
3816 }
3817
3818
3819 /**
3820 * gather_hbainfo - HBA characteristics for the applications
3821 * @adapter : HBA soft state
3822 * @hinfo : pointer to the caller's host info strucuture
3823 */
3824 static int
3825 gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
3826 {
3827 uint8_t dmajor;
3828
3829 dmajor = megaraid_mbox_version[0];
3830
3831 hinfo->pci_vendor_id = adapter->pdev->vendor;
3832 hinfo->pci_device_id = adapter->pdev->device;
3833 hinfo->subsys_vendor_id = adapter->pdev->subsystem_vendor;
3834 hinfo->subsys_device_id = adapter->pdev->subsystem_device;
3835
3836 hinfo->pci_bus = adapter->pdev->bus->number;
3837 hinfo->pci_dev_fn = adapter->pdev->devfn;
3838 hinfo->pci_slot = PCI_SLOT(adapter->pdev->devfn);
3839 hinfo->irq = adapter->host->irq;
3840 hinfo->baseport = ADAP2RAIDDEV(adapter)->baseport;
3841
3842 hinfo->unique_id = (hinfo->pci_bus << 8) | adapter->pdev->devfn;
3843 hinfo->host_no = adapter->host->host_no;
3844
3845 return 0;
3846 }
3847
3848 /*
3849 * END: Interface for the common management module
3850 */
3851
3852
3853
3854 /**
3855 * megaraid_sysfs_alloc_resources - allocate sysfs related resources
3856 * @adapter : controller's soft state
3857 *
3858 * Allocate packets required to issue FW calls whenever the sysfs attributes
3859 * are read. These attributes would require up-to-date information from the
3860 * FW. Also set up resources for mutual exclusion to share these resources and
3861 * the wait queue.
3862 *
3863 * Return 0 on success.
3864 * Return -ERROR_CODE on failure.
3865 */
3866 static int
3867 megaraid_sysfs_alloc_resources(adapter_t *adapter)
3868 {
3869 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3870 int rval = 0;
3871
3872 raid_dev->sysfs_uioc = kmalloc(sizeof(uioc_t), GFP_KERNEL);
3873
3874 raid_dev->sysfs_mbox64 = kmalloc(sizeof(mbox64_t), GFP_KERNEL);
3875
3876 raid_dev->sysfs_buffer = pci_alloc_consistent(adapter->pdev,
3877 PAGE_SIZE, &raid_dev->sysfs_buffer_dma);
3878
3879 if (!raid_dev->sysfs_uioc || !raid_dev->sysfs_mbox64 ||
3880 !raid_dev->sysfs_buffer) {
3881
3882 con_log(CL_ANN, (KERN_WARNING
3883 "megaraid: out of memory, %s %d\n", __func__,
3884 __LINE__));
3885
3886 rval = -ENOMEM;
3887
3888 megaraid_sysfs_free_resources(adapter);
3889 }
3890
3891 mutex_init(&raid_dev->sysfs_mtx);
3892
3893 init_waitqueue_head(&raid_dev->sysfs_wait_q);
3894
3895 return rval;
3896 }
3897
3898
3899 /**
3900 * megaraid_sysfs_free_resources - free sysfs related resources
3901 * @adapter : controller's soft state
3902 *
3903 * Free packets allocated for sysfs FW commands
3904 */
3905 static void
3906 megaraid_sysfs_free_resources(adapter_t *adapter)
3907 {
3908 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3909
3910 kfree(raid_dev->sysfs_uioc);
3911 kfree(raid_dev->sysfs_mbox64);
3912
3913 if (raid_dev->sysfs_buffer) {
3914 pci_free_consistent(adapter->pdev, PAGE_SIZE,
3915 raid_dev->sysfs_buffer, raid_dev->sysfs_buffer_dma);
3916 }
3917 }
3918
3919
3920 /**
3921 * megaraid_sysfs_get_ldmap_done - callback for get ldmap
3922 * @uioc : completed packet
3923 *
3924 * Callback routine called in the ISR/tasklet context for get ldmap call
3925 */
3926 static void
3927 megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
3928 {
3929 adapter_t *adapter = (adapter_t *)uioc->buf_vaddr;
3930 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3931
3932 uioc->status = 0;
3933
3934 wake_up(&raid_dev->sysfs_wait_q);
3935 }
3936
3937
3938 /**
3939 * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap
3940 * @data : timed out packet
3941 *
3942 * Timeout routine to recover and return to application, in case the adapter
3943 * has stopped responding. A timeout of 60 seconds for this command seems like
3944 * a good value.
3945 */
3946 static void
3947 megaraid_sysfs_get_ldmap_timeout(unsigned long data)
3948 {
3949 uioc_t *uioc = (uioc_t *)data;
3950 adapter_t *adapter = (adapter_t *)uioc->buf_vaddr;
3951 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3952
3953 uioc->status = -ETIME;
3954
3955 wake_up(&raid_dev->sysfs_wait_q);
3956 }
3957
3958
3959 /**
3960 * megaraid_sysfs_get_ldmap - get update logical drive map
3961 * @adapter : controller's soft state
3962 *
3963 * This routine will be called whenever user reads the logical drive
3964 * attributes, go get the current logical drive mapping table from the
3965 * firmware. We use the management API's to issue commands to the controller.
3966 *
3967 * NOTE: The commands issuance functionality is not generalized and
3968 * implemented in context of "get ld map" command only. If required, the
3969 * command issuance logical can be trivially pulled out and implemented as a
3970 * standalone library. For now, this should suffice since there is no other
3971 * user of this interface.
3972 *
3973 * Return 0 on success.
3974 * Return -1 on failure.
3975 */
3976 static int
3977 megaraid_sysfs_get_ldmap(adapter_t *adapter)
3978 {
3979 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3980 uioc_t *uioc;
3981 mbox64_t *mbox64;
3982 mbox_t *mbox;
3983 char *raw_mbox;
3984 struct timer_list sysfs_timer;
3985 struct timer_list *timerp;
3986 caddr_t ldmap;
3987 int rval = 0;
3988
3989 /*
3990 * Allow only one read at a time to go through the sysfs attributes
3991 */
3992 mutex_lock(&raid_dev->sysfs_mtx);
3993
3994 uioc = raid_dev->sysfs_uioc;
3995 mbox64 = raid_dev->sysfs_mbox64;
3996 ldmap = raid_dev->sysfs_buffer;
3997
3998 memset(uioc, 0, sizeof(uioc_t));
3999 memset(mbox64, 0, sizeof(mbox64_t));
4000 memset(ldmap, 0, sizeof(raid_dev->curr_ldmap));
4001
4002 mbox = &mbox64->mbox32;
4003 raw_mbox = (char *)mbox;
4004 uioc->cmdbuf = (uint64_t)(unsigned long)mbox64;
4005 uioc->buf_vaddr = (caddr_t)adapter;
4006 uioc->status = -ENODATA;
4007 uioc->done = megaraid_sysfs_get_ldmap_done;
4008
4009 /*
4010 * Prepare the mailbox packet to get the current logical drive mapping
4011 * table
4012 */
4013 mbox->xferaddr = (uint32_t)raid_dev->sysfs_buffer_dma;
4014
4015 raw_mbox[0] = FC_DEL_LOGDRV;
4016 raw_mbox[2] = OP_GET_LDID_MAP;
4017
4018 /*
4019 * Setup a timer to recover from a non-responding controller
4020 */
4021 timerp = &sysfs_timer;
4022 init_timer(timerp);
4023
4024 timerp->function = megaraid_sysfs_get_ldmap_timeout;
4025 timerp->data = (unsigned long)uioc;
4026 timerp->expires = jiffies + 60 * HZ;
4027
4028 add_timer(timerp);
4029
4030 /*
4031 * Send the command to the firmware
4032 */
4033 rval = megaraid_mbox_mm_command(adapter, uioc);
4034
4035 if (rval == 0) { // command successfully issued
4036 wait_event(raid_dev->sysfs_wait_q, (uioc->status != -ENODATA));
4037
4038 /*
4039 * Check if the command timed out
4040 */
4041 if (uioc->status == -ETIME) {
4042 con_log(CL_ANN, (KERN_NOTICE
4043 "megaraid: sysfs get ld map timed out\n"));
4044
4045 rval = -ETIME;
4046 }
4047 else {
4048 rval = mbox->status;
4049 }
4050
4051 if (rval == 0) {
4052 memcpy(raid_dev->curr_ldmap, ldmap,
4053 sizeof(raid_dev->curr_ldmap));
4054 }
4055 else {
4056 con_log(CL_ANN, (KERN_NOTICE
4057 "megaraid: get ld map failed with %x\n", rval));
4058 }
4059 }
4060 else {
4061 con_log(CL_ANN, (KERN_NOTICE
4062 "megaraid: could not issue ldmap command:%x\n", rval));
4063 }
4064
4065
4066 del_timer_sync(timerp);
4067
4068 mutex_unlock(&raid_dev->sysfs_mtx);
4069
4070 return rval;
4071 }
4072
4073
4074 /**
4075 * megaraid_sysfs_show_app_hndl - display application handle for this adapter
4076 * @cdev : class device object representation for the host
4077 * @buf : buffer to send data to
4078 *
4079 * Display the handle used by the applications while executing management
4080 * tasks on the adapter. We invoke a management module API to get the adapter
4081 * handle, since we do not interface with applications directly.
4082 */
4083 static ssize_t
4084 megaraid_sysfs_show_app_hndl(struct device *dev, struct device_attribute *attr,
4085 char *buf)
4086 {
4087 struct Scsi_Host *shost = class_to_shost(dev);
4088 adapter_t *adapter = (adapter_t *)SCSIHOST2ADAP(shost);
4089 uint32_t app_hndl;
4090
4091 app_hndl = mraid_mm_adapter_app_handle(adapter->unique_id);
4092
4093 return snprintf(buf, 8, "%u\n", app_hndl);
4094 }
4095
4096
4097 /**
4098 * megaraid_sysfs_show_ldnum - display the logical drive number for this device
4099 * @dev : device object representation for the scsi device
4100 * @attr : device attribute to show
4101 * @buf : buffer to send data to
4102 *
4103 * Display the logical drive number for the device in question, if it a valid
4104 * logical drive. For physical devices, "-1" is returned.
4105 *
4106 * The logical drive number is displayed in following format:
4107 *
4108 * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE>
4109 *
4110 * <int> <int> <int> <int>
4111 */
4112 static ssize_t
4113 megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf)
4114 {
4115 struct scsi_device *sdev = to_scsi_device(dev);
4116 adapter_t *adapter = (adapter_t *)SCSIHOST2ADAP(sdev->host);
4117 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
4118 int scsi_id = -1;
4119 int logical_drv = -1;
4120 int ldid_map = -1;
4121 uint32_t app_hndl = 0;
4122 int mapped_sdev_id;
4123 int rval;
4124 int i;
4125
4126 if (raid_dev->random_del_supported &&
4127 MRAID_IS_LOGICAL_SDEV(adapter, sdev)) {
4128
4129 rval = megaraid_sysfs_get_ldmap(adapter);
4130 if (rval == 0) {
4131
4132 for (i = 0; i < MAX_LOGICAL_DRIVES_40LD; i++) {
4133
4134 mapped_sdev_id = sdev->id;
4135
4136 if (sdev->id > adapter->init_id) {
4137 mapped_sdev_id -= 1;
4138 }
4139
4140 if (raid_dev->curr_ldmap[i] == mapped_sdev_id) {
4141
4142 scsi_id = sdev->id;
4143
4144 logical_drv = i;
4145
4146 ldid_map = raid_dev->curr_ldmap[i];
4147
4148 app_hndl = mraid_mm_adapter_app_handle(
4149 adapter->unique_id);
4150
4151 break;
4152 }
4153 }
4154 }
4155 else {
4156 con_log(CL_ANN, (KERN_NOTICE
4157 "megaraid: sysfs get ld map failed: %x\n",
4158 rval));
4159 }
4160 }
4161
4162 return snprintf(buf, 36, "%d %d %d %d\n", scsi_id, logical_drv,
4163 ldid_map, app_hndl);
4164 }
4165
4166
4167 /*
4168 * END: Mailbox Low Level Driver
4169 */
4170 module_init(megaraid_init);
4171 module_exit(megaraid_exit);
4172
4173 /* vim: set ts=8 sw=8 tw=78 ai si: */