include/linux/if.h

   1 /*
   2  * INET         An implementation of the TCP/IP protocol suite for the LINUX
   3  *              operating system.  INET is implemented using the  BSD Socket
   4  *              interface as the means of communication with the user level.
   5  *
   6  *              Global definitions for the INET interface module.
   7  *
   8  * Version:     @(#)if.h        1.0.2   04/18/93
   9  *
  10  * Authors:     Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
  11  *              Ross Biro
  12  *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
  13  *
  14  *              This program is free software; you can redistribute it and/or
  15  *              modify it under the terms of the GNU General Public License
  16  *              as published by the Free Software Foundation; either version
  17  *              2 of the License, or (at your option) any later version.
  18  */
  19 #ifndef _LINUX_IF_H
  20 #define _LINUX_IF_H
  21
  22 #include <linux/types.h>                /* for "__kernel_caddr_t" et al */
  23 #include <linux/socket.h>               /* for "struct sockaddr" et al  */
  24 #include <linux/compiler.h>             /* for "__user" et al           */
  25
  26 #define IFNAMSIZ        16
  27 #define IFALIASZ        256
  28 #include <linux/hdlc/ioctl.h>
  29
  30 /* Standard interface flags (netdevice->flags). */
  31 #define IFF_UP          0x1             /* interface is up              */
  32 #define IFF_BROADCAST   0x2             /* broadcast address valid      */
  33 #define IFF_DEBUG       0x4             /* turn on debugging            */
  34 #define IFF_LOOPBACK    0x8             /* is a loopback net            */
  35 #define IFF_POINTOPOINT 0x10            /* interface is has p-p link    */
  36 #define IFF_NOTRAILERS  0x20            /* avoid use of trailers        */
  37 #define IFF_RUNNING     0x40            /* interface RFC2863 OPER_UP    */
  38 #define IFF_NOARP       0x80            /* no ARP protocol              */
  39 #define IFF_PROMISC     0x100           /* receive all packets          */
  40 #define IFF_ALLMULTI    0x200           /* receive all multicast packets*/
  41
  42 #define IFF_MASTER      0x400           /* master of a load balancer    */
  43 #define IFF_SLAVE       0x800           /* slave of a load balancer     */
  44
  45 #define IFF_MULTICAST   0x1000          /* Supports multicast           */
  46
  47 #define IFF_PORTSEL     0x2000          /* can set media type           */
  48 #define IFF_AUTOMEDIA   0x4000          /* auto media select active     */
  49 #define IFF_DYNAMIC     0x8000          /* dialup device with changing addresses*/
  50
  51 #define IFF_LOWER_UP    0x10000         /* driver signals L1 up         */
  52 #define IFF_DORMANT     0x20000         /* driver signals dormant       */
  53
  54 #define IFF_ECHO        0x40000         /* echo sent packets            */
  55
  56 #define IFF_VOLATILE    (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
  57                 IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
  58
  59 /* Private (from user) interface flags (netdevice->priv_flags). */
  60 #define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
  61 #define IFF_EBRIDGE     0x2             /* Ethernet bridging device.    */
  62 #define IFF_SLAVE_INACTIVE      0x4     /* bonding slave not the curr. active */
  63 #define IFF_MASTER_8023AD       0x8     /* bonding master, 802.3ad.     */
  64 #define IFF_MASTER_ALB  0x10            /* bonding master, balance-alb. */
  65 #define IFF_BONDING     0x20            /* bonding master or slave      */
  66 #define IFF_SLAVE_NEEDARP 0x40          /* need ARPs for validation     */
  67 #define IFF_ISATAP      0x80            /* ISATAP interface (RFC4214)   */
  68 #define IFF_MASTER_ARPMON 0x100         /* bonding master, ARP mon in use */
  69 #define IFF_WAN_HDLC    0x200           /* WAN HDLC device              */
  70 #define IFF_XMIT_DST_RELEASE 0x400      /* dev_hard_start_xmit() is allowed to
  71                                          * release skb->dst
  72                                          */
  73 #define IFF_DONT_BRIDGE 0x800           /* disallow bridging this ether dev */
  74 #define IFF_DISABLE_NETPOLL     0x1000  /* disable netpoll at run-time */
  75 #define IFF_MACVLAN_PORT        0x2000  /* device used as macvlan port */
  76 #define IFF_BRIDGE_PORT 0x4000          /* device used as bridge port */
  77 #define IFF_OVS_DATAPATH        0x8000  /* device used as Open vSwitch
  78                                          * datapath port */
  79 #define IFF_TX_SKB_SHARING      0x10000 /* The interface supports sharing
  80                                          * skbs on transmit */
  81 #define IFF_UNICAST_FLT 0x20000         /* Supports unicast filtering   */
  82 #define IFF_TEAM_PORT   0x40000         /* device used as team port */
  83
  84 #define IF_GET_IFACE    0x0001          /* for querying only */
  85 #define IF_GET_PROTO    0x0002
  86
  87 /* For definitions see hdlc.h */
  88 #define IF_IFACE_V35    0x1000          /* V.35 serial interface        */
  89 #define IF_IFACE_V24    0x1001          /* V.24 serial interface        */
  90 #define IF_IFACE_X21    0x1002          /* X.21 serial interface        */
  91 #define IF_IFACE_T1     0x1003          /* T1 telco serial interface    */
  92 #define IF_IFACE_E1     0x1004          /* E1 telco serial interface    */
  93 #define IF_IFACE_SYNC_SERIAL 0x1005     /* can't be set by software     */
  94 #define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
  95
  96 /* For definitions see hdlc.h */
  97 #define IF_PROTO_HDLC   0x2000          /* raw HDLC protocol            */
  98 #define IF_PROTO_PPP    0x2001          /* PPP protocol                 */
  99 #define IF_PROTO_CISCO  0x2002          /* Cisco HDLC protocol          */
 100 #define IF_PROTO_FR     0x2003          /* Frame Relay protocol         */
 101 #define IF_PROTO_FR_ADD_PVC 0x2004      /*    Create FR PVC             */
 102 #define IF_PROTO_FR_DEL_PVC 0x2005      /*    Delete FR PVC             */
 103 #define IF_PROTO_X25    0x2006          /* X.25                         */
 104 #define IF_PROTO_HDLC_ETH 0x2007        /* raw HDLC, Ethernet emulation */
 105 #define IF_PROTO_FR_ADD_ETH_PVC 0x2008  /*  Create FR Ethernet-bridged PVC */
 106 #define IF_PROTO_FR_DEL_ETH_PVC 0x2009  /*  Delete FR Ethernet-bridged PVC */
 107 #define IF_PROTO_FR_PVC 0x200A          /* for reading PVC status       */
 108 #define IF_PROTO_FR_ETH_PVC 0x200B
 109 #define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
 110
 111 /* RFC 2863 operational status */
 112 enum {
 113         IF_OPER_UNKNOWN,
 114         IF_OPER_NOTPRESENT,
 115         IF_OPER_DOWN,
 116         IF_OPER_LOWERLAYERDOWN,
 117         IF_OPER_TESTING,
 118         IF_OPER_DORMANT,
 119         IF_OPER_UP,
 120 };
 121
 122 /* link modes */
 123 enum {
 124         IF_LINK_MODE_DEFAULT,
 125         IF_LINK_MODE_DORMANT,   /* limit upward transition to dormant */
 126 };
 127
 128 /*
 129  *      Device mapping structure. I'd just gone off and designed a
 130  *      beautiful scheme using only loadable modules with arguments
 131  *      for driver options and along come the PCMCIA people 8)
 132  *
 133  *      Ah well. The get() side of this is good for WDSETUP, and it'll
 134  *      be handy for debugging things. The set side is fine for now and
 135  *      being very small might be worth keeping for clean configuration.
 136  */
 137
 138 struct ifmap {
 139         unsigned long mem_start;
 140         unsigned long mem_end;
 141         unsigned short base_addr;
 142         unsigned char irq;
 143         unsigned char dma;
 144         unsigned char port;
 145         /* 3 bytes spare */
 146 };
 147
 148 struct if_settings {
 149         unsigned int type;      /* Type of physical device or protocol */
 150         unsigned int size;      /* Size of the data allocated by the caller */
 151         union {
 152                 /* {atm/eth/dsl}_settings anyone ? */
 153                 raw_hdlc_proto          __user *raw_hdlc;
 154                 cisco_proto             __user *cisco;
 155                 fr_proto                __user *fr;
 156                 fr_proto_pvc            __user *fr_pvc;
 157                 fr_proto_pvc_info       __user *fr_pvc_info;
 158
 159                 /* interface settings */
 160                 sync_serial_settings    __user *sync;
 161                 te1_settings            __user *te1;
 162         } ifs_ifsu;
 163 };
 164
 165 /*
 166  * Interface request structure used for socket
 167  * ioctl's.  All interface ioctl's must have parameter
 168  * definitions which begin with ifr_name.  The
 169  * remainder may be interface specific.
 170  */
 171
 172 struct ifreq {
 173 #define IFHWADDRLEN     6
 174         union
 175         {
 176                 char    ifrn_name[IFNAMSIZ];            /* if name, e.g. "en0" */
 177         } ifr_ifrn;
 178
 179         union {
 180                 struct  sockaddr ifru_addr;
 181                 struct  sockaddr ifru_dstaddr;
 182                 struct  sockaddr ifru_broadaddr;
 183                 struct  sockaddr ifru_netmask;
 184                 struct  sockaddr ifru_hwaddr;
 185                 short   ifru_flags;
 186                 int     ifru_ivalue;
 187                 int     ifru_mtu;
 188                 struct  ifmap ifru_map;
 189                 char    ifru_slave[IFNAMSIZ];   /* Just fits the size */
 190                 char    ifru_newname[IFNAMSIZ];
 191                 void __user *   ifru_data;
 192                 struct  if_settings ifru_settings;
 193         } ifr_ifru;
 194 };
 195
 196 #define ifr_name        ifr_ifrn.ifrn_name      /* interface name       */
 197 #define ifr_hwaddr      ifr_ifru.ifru_hwaddr    /* MAC address          */
 198 #define ifr_addr        ifr_ifru.ifru_addr      /* address              */
 199 #define ifr_dstaddr     ifr_ifru.ifru_dstaddr   /* other end of p-p lnk */
 200 #define ifr_broadaddr   ifr_ifru.ifru_broadaddr /* broadcast address    */
 201 #define ifr_netmask     ifr_ifru.ifru_netmask   /* interface net mask   */
 202 #define ifr_flags       ifr_ifru.ifru_flags     /* flags                */
 203 #define ifr_metric      ifr_ifru.ifru_ivalue    /* metric               */
 204 #define ifr_mtu         ifr_ifru.ifru_mtu       /* mtu                  */
 205 #define ifr_map         ifr_ifru.ifru_map       /* device map           */
 206 #define ifr_slave       ifr_ifru.ifru_slave     /* slave device         */
 207 #define ifr_data        ifr_ifru.ifru_data      /* for use by interface */
 208 #define ifr_ifindex     ifr_ifru.ifru_ivalue    /* interface index      */
 209 #define ifr_bandwidth   ifr_ifru.ifru_ivalue    /* link bandwidth       */
 210 #define ifr_qlen        ifr_ifru.ifru_ivalue    /* Queue length         */
 211 #define ifr_newname     ifr_ifru.ifru_newname   /* New name             */
 212 #define ifr_settings    ifr_ifru.ifru_settings  /* Device/proto settings*/
 213
 214 /*
 215  * Structure used in SIOCGIFCONF request.
 216  * Used to retrieve interface configuration
 217  * for machine (useful for programs which
 218  * must know all networks accessible).
 219  */
 220
 221 struct ifconf  {
 222         int     ifc_len;                        /* size of buffer       */
 223         union {
 224                 char __user *ifcu_buf;
 225                 struct ifreq __user *ifcu_req;
 226         } ifc_ifcu;
 227 };
 228 #define ifc_buf ifc_ifcu.ifcu_buf               /* buffer address       */
 229 #define ifc_req ifc_ifcu.ifcu_req               /* array of structures  */
 230
 231 #endif /* _LINUX_IF_H */