OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4
[zen-stable.git] / include / linux / printk.h
blobf0e22f75143f67e3b4d8dc72ba4bc8e81e3a5570
1 #ifndef __KERNEL_PRINTK__
2 #define __KERNEL_PRINTK__
4 #include <linux/init.h>
6 extern const char linux_banner[];
7 extern const char linux_proc_banner[];
9 #define KERN_EMERG "<0>" /* system is unusable */
10 #define KERN_ALERT "<1>" /* action must be taken immediately */
11 #define KERN_CRIT "<2>" /* critical conditions */
12 #define KERN_ERR "<3>" /* error conditions */
13 #define KERN_WARNING "<4>" /* warning conditions */
14 #define KERN_NOTICE "<5>" /* normal but significant condition */
15 #define KERN_INFO "<6>" /* informational */
16 #define KERN_DEBUG "<7>" /* debug-level messages */
18 /* Use the default kernel loglevel */
19 #define KERN_DEFAULT "<d>"
21 * Annotation for a "continued" line of log printout (only done after a
22 * line that had no enclosing \n). Only to be used by core/arch code
23 * during early bootup (a continued line is not SMP-safe otherwise).
25 #define KERN_CONT "<c>"
27 extern int console_printk[];
29 #define console_loglevel (console_printk[0])
30 #define default_message_loglevel (console_printk[1])
31 #define minimum_console_loglevel (console_printk[2])
32 #define default_console_loglevel (console_printk[3])
34 static inline void console_silent(void)
36 console_loglevel = 0;
39 static inline void console_verbose(void)
41 if (console_loglevel)
42 console_loglevel = 15;
45 struct va_format {
46 const char *fmt;
47 va_list *va;
51 * FW_BUG
52 * Add this to a message where you are sure the firmware is buggy or behaves
53 * really stupid or out of spec. Be aware that the responsible BIOS developer
54 * should be able to fix this issue or at least get a concrete idea of the
55 * problem by reading your message without the need of looking at the kernel
56 * code.
58 * Use it for definite and high priority BIOS bugs.
60 * FW_WARN
61 * Use it for not that clear (e.g. could the kernel messed up things already?)
62 * and medium priority BIOS bugs.
64 * FW_INFO
65 * Use this one if you want to tell the user or vendor about something
66 * suspicious, but generally harmless related to the firmware.
68 * Use it for information or very low priority BIOS bugs.
70 #define FW_BUG "[Firmware Bug]: "
71 #define FW_WARN "[Firmware Warn]: "
72 #define FW_INFO "[Firmware Info]: "
75 * HW_ERR
76 * Add this to a message for hardware errors, so that user can report
77 * it to hardware vendor instead of LKML or software vendor.
79 #define HW_ERR "[Hardware Error]: "
82 * Dummy printk for disabled debugging statements to use whilst maintaining
83 * gcc's format and side-effect checking.
85 static inline __printf(1, 2)
86 int no_printk(const char *fmt, ...)
88 return 0;
91 extern asmlinkage __printf(1, 2)
92 void early_printk(const char *fmt, ...);
94 extern int printk_needs_cpu(int cpu);
95 extern void printk_tick(void);
97 #ifdef CONFIG_PRINTK
98 asmlinkage __printf(1, 0)
99 int vprintk(const char *fmt, va_list args);
100 asmlinkage __printf(1, 2) __cold
101 int printk(const char *fmt, ...);
104 * Please don't use printk_ratelimit(), because it shares ratelimiting state
105 * with all other unrelated printk_ratelimit() callsites. Instead use
106 * printk_ratelimited() or plain old __ratelimit().
108 extern int __printk_ratelimit(const char *func);
109 #define printk_ratelimit() __printk_ratelimit(__func__)
110 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
111 unsigned int interval_msec);
113 extern int printk_delay_msec;
114 extern int dmesg_restrict;
115 extern int kptr_restrict;
117 void log_buf_kexec_setup(void);
118 void __init setup_log_buf(int early);
119 #else
120 static inline __printf(1, 0)
121 int vprintk(const char *s, va_list args)
123 return 0;
125 static inline __printf(1, 2) __cold
126 int printk(const char *s, ...)
128 return 0;
130 static inline int printk_ratelimit(void)
132 return 0;
134 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
135 unsigned int interval_msec)
137 return false;
140 static inline void log_buf_kexec_setup(void)
144 static inline void setup_log_buf(int early)
147 #endif
149 extern void dump_stack(void) __cold;
151 #ifndef pr_fmt
152 #define pr_fmt(fmt) fmt
153 #endif
155 #define pr_emerg(fmt, ...) \
156 printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
157 #define pr_alert(fmt, ...) \
158 printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
159 #define pr_crit(fmt, ...) \
160 printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
161 #define pr_err(fmt, ...) \
162 printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
163 #define pr_warning(fmt, ...) \
164 printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
165 #define pr_warn pr_warning
166 #define pr_notice(fmt, ...) \
167 printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
168 #define pr_info(fmt, ...) \
169 printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
170 #define pr_cont(fmt, ...) \
171 printk(KERN_CONT fmt, ##__VA_ARGS__)
173 /* pr_devel() should produce zero code unless DEBUG is defined */
174 #ifdef DEBUG
175 #define pr_devel(fmt, ...) \
176 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
177 #else
178 #define pr_devel(fmt, ...) \
179 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
180 #endif
182 /* If you are writing a driver, please use dev_dbg instead */
183 #if defined(DEBUG)
184 #define pr_debug(fmt, ...) \
185 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
186 #elif defined(CONFIG_DYNAMIC_DEBUG)
187 /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
188 #define pr_debug(fmt, ...) \
189 dynamic_pr_debug(fmt, ##__VA_ARGS__)
190 #else
191 #define pr_debug(fmt, ...) \
192 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
193 #endif
196 * Print a one-time message (analogous to WARN_ONCE() et al):
199 #ifdef CONFIG_PRINTK
200 #define printk_once(fmt, ...) \
201 ({ \
202 static bool __print_once; \
204 if (!__print_once) { \
205 __print_once = true; \
206 printk(fmt, ##__VA_ARGS__); \
209 #else
210 #define printk_once(fmt, ...) \
211 no_printk(fmt, ##__VA_ARGS__)
212 #endif
214 #define pr_emerg_once(fmt, ...) \
215 printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
216 #define pr_alert_once(fmt, ...) \
217 printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
218 #define pr_crit_once(fmt, ...) \
219 printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
220 #define pr_err_once(fmt, ...) \
221 printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
222 #define pr_warn_once(fmt, ...) \
223 printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
224 #define pr_notice_once(fmt, ...) \
225 printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
226 #define pr_info_once(fmt, ...) \
227 printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
228 #define pr_cont_once(fmt, ...) \
229 printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
230 /* If you are writing a driver, please use dev_dbg instead */
231 #if defined(DEBUG)
232 #define pr_debug_once(fmt, ...) \
233 printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
234 #else
235 #define pr_debug_once(fmt, ...) \
236 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
237 #endif
240 * ratelimited messages with local ratelimit_state,
241 * no local ratelimit_state used in the !PRINTK case
243 #ifdef CONFIG_PRINTK
244 #define printk_ratelimited(fmt, ...) \
245 ({ \
246 static DEFINE_RATELIMIT_STATE(_rs, \
247 DEFAULT_RATELIMIT_INTERVAL, \
248 DEFAULT_RATELIMIT_BURST); \
250 if (__ratelimit(&_rs)) \
251 printk(fmt, ##__VA_ARGS__); \
253 #else
254 #define printk_ratelimited(fmt, ...) \
255 no_printk(fmt, ##__VA_ARGS__)
256 #endif
258 #define pr_emerg_ratelimited(fmt, ...) \
259 printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
260 #define pr_alert_ratelimited(fmt, ...) \
261 printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
262 #define pr_crit_ratelimited(fmt, ...) \
263 printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
264 #define pr_err_ratelimited(fmt, ...) \
265 printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
266 #define pr_warn_ratelimited(fmt, ...) \
267 printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
268 #define pr_notice_ratelimited(fmt, ...) \
269 printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
270 #define pr_info_ratelimited(fmt, ...) \
271 printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
272 /* no pr_cont_ratelimited, don't do that... */
273 /* If you are writing a driver, please use dev_dbg instead */
274 #if defined(DEBUG)
275 #define pr_debug_ratelimited(fmt, ...) \
276 printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
277 #else
278 #define pr_debug_ratelimited(fmt, ...) \
279 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
280 #endif
282 enum {
283 DUMP_PREFIX_NONE,
284 DUMP_PREFIX_ADDRESS,
285 DUMP_PREFIX_OFFSET
287 extern void hex_dump_to_buffer(const void *buf, size_t len,
288 int rowsize, int groupsize,
289 char *linebuf, size_t linebuflen, bool ascii);
290 #ifdef CONFIG_PRINTK
291 extern void print_hex_dump(const char *level, const char *prefix_str,
292 int prefix_type, int rowsize, int groupsize,
293 const void *buf, size_t len, bool ascii);
294 extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
295 const void *buf, size_t len);
296 #else
297 static inline void print_hex_dump(const char *level, const char *prefix_str,
298 int prefix_type, int rowsize, int groupsize,
299 const void *buf, size_t len, bool ascii)
302 static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
303 const void *buf, size_t len)
307 #endif
309 #endif