OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4
[zen-stable.git] / kernel / debug / gdbstub.c
blobc22d8c28ad848c63003ffb00bf235d9d0ab34649
1 /*
2 * Kernel Debug Core
4 * Maintainer: Jason Wessel <jason.wessel@windriver.com>
6 * Copyright (C) 2000-2001 VERITAS Software Corporation.
7 * Copyright (C) 2002-2004 Timesys Corporation
8 * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
9 * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
10 * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
11 * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
12 * Copyright (C) 2005-2009 Wind River Systems, Inc.
13 * Copyright (C) 2007 MontaVista Software, Inc.
14 * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
16 * Contributors at various stages not listed above:
17 * Jason Wessel ( jason.wessel@windriver.com )
18 * George Anzinger <george@mvista.com>
19 * Anurekh Saxena (anurekh.saxena@timesys.com)
20 * Lake Stevens Instrument Division (Glenn Engel)
21 * Jim Kingdon, Cygnus Support.
23 * Original KGDB stub: David Grothe <dave@gcom.com>,
24 * Tigran Aivazian <tigran@sco.com>
26 * This file is licensed under the terms of the GNU General Public License
27 * version 2. This program is licensed "as is" without any warranty of any
28 * kind, whether express or implied.
31 #include <linux/kernel.h>
32 #include <linux/kgdb.h>
33 #include <linux/kdb.h>
34 #include <linux/reboot.h>
35 #include <linux/uaccess.h>
36 #include <asm/cacheflush.h>
37 #include <asm/unaligned.h>
38 #include "debug_core.h"
40 #define KGDB_MAX_THREAD_QUERY 17
42 /* Our I/O buffers. */
43 static char remcom_in_buffer[BUFMAX];
44 static char remcom_out_buffer[BUFMAX];
45 static int gdbstub_use_prev_in_buf;
46 static int gdbstub_prev_in_buf_pos;
48 /* Storage for the registers, in GDB format. */
49 static unsigned long gdb_regs[(NUMREGBYTES +
50 sizeof(unsigned long) - 1) /
51 sizeof(unsigned long)];
54 * GDB remote protocol parser:
57 #ifdef CONFIG_KGDB_KDB
58 static int gdbstub_read_wait(void)
60 int ret = -1;
61 int i;
63 if (unlikely(gdbstub_use_prev_in_buf)) {
64 if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf)
65 return remcom_in_buffer[gdbstub_prev_in_buf_pos++];
66 else
67 gdbstub_use_prev_in_buf = 0;
70 /* poll any additional I/O interfaces that are defined */
71 while (ret < 0)
72 for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
73 ret = kdb_poll_funcs[i]();
74 if (ret > 0)
75 break;
77 return ret;
79 #else
80 static int gdbstub_read_wait(void)
82 int ret = dbg_io_ops->read_char();
83 while (ret == NO_POLL_CHAR)
84 ret = dbg_io_ops->read_char();
85 return ret;
87 #endif
88 /* scan for the sequence $<data>#<checksum> */
89 static void get_packet(char *buffer)
91 unsigned char checksum;
92 unsigned char xmitcsum;
93 int count;
94 char ch;
96 do {
98 * Spin and wait around for the start character, ignore all
99 * other characters:
101 while ((ch = (gdbstub_read_wait())) != '$')
102 /* nothing */;
104 kgdb_connected = 1;
105 checksum = 0;
106 xmitcsum = -1;
108 count = 0;
111 * now, read until a # or end of buffer is found:
113 while (count < (BUFMAX - 1)) {
114 ch = gdbstub_read_wait();
115 if (ch == '#')
116 break;
117 checksum = checksum + ch;
118 buffer[count] = ch;
119 count = count + 1;
122 if (ch == '#') {
123 xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
124 xmitcsum += hex_to_bin(gdbstub_read_wait());
126 if (checksum != xmitcsum)
127 /* failed checksum */
128 dbg_io_ops->write_char('-');
129 else
130 /* successful transfer */
131 dbg_io_ops->write_char('+');
132 if (dbg_io_ops->flush)
133 dbg_io_ops->flush();
135 buffer[count] = 0;
136 } while (checksum != xmitcsum);
140 * Send the packet in buffer.
141 * Check for gdb connection if asked for.
143 static void put_packet(char *buffer)
145 unsigned char checksum;
146 int count;
147 char ch;
150 * $<packet info>#<checksum>.
152 while (1) {
153 dbg_io_ops->write_char('$');
154 checksum = 0;
155 count = 0;
157 while ((ch = buffer[count])) {
158 dbg_io_ops->write_char(ch);
159 checksum += ch;
160 count++;
163 dbg_io_ops->write_char('#');
164 dbg_io_ops->write_char(hex_asc_hi(checksum));
165 dbg_io_ops->write_char(hex_asc_lo(checksum));
166 if (dbg_io_ops->flush)
167 dbg_io_ops->flush();
169 /* Now see what we get in reply. */
170 ch = gdbstub_read_wait();
172 if (ch == 3)
173 ch = gdbstub_read_wait();
175 /* If we get an ACK, we are done. */
176 if (ch == '+')
177 return;
180 * If we get the start of another packet, this means
181 * that GDB is attempting to reconnect. We will NAK
182 * the packet being sent, and stop trying to send this
183 * packet.
185 if (ch == '$') {
186 dbg_io_ops->write_char('-');
187 if (dbg_io_ops->flush)
188 dbg_io_ops->flush();
189 return;
194 static char gdbmsgbuf[BUFMAX + 1];
196 void gdbstub_msg_write(const char *s, int len)
198 char *bufptr;
199 int wcount;
200 int i;
202 if (len == 0)
203 len = strlen(s);
205 /* 'O'utput */
206 gdbmsgbuf[0] = 'O';
208 /* Fill and send buffers... */
209 while (len > 0) {
210 bufptr = gdbmsgbuf + 1;
212 /* Calculate how many this time */
213 if ((len << 1) > (BUFMAX - 2))
214 wcount = (BUFMAX - 2) >> 1;
215 else
216 wcount = len;
218 /* Pack in hex chars */
219 for (i = 0; i < wcount; i++)
220 bufptr = hex_byte_pack(bufptr, s[i]);
221 *bufptr = '\0';
223 /* Move up */
224 s += wcount;
225 len -= wcount;
227 /* Write packet */
228 put_packet(gdbmsgbuf);
233 * Convert the memory pointed to by mem into hex, placing result in
234 * buf. Return a pointer to the last char put in buf (null). May
235 * return an error.
237 char *kgdb_mem2hex(char *mem, char *buf, int count)
239 char *tmp;
240 int err;
243 * We use the upper half of buf as an intermediate buffer for the
244 * raw memory copy. Hex conversion will work against this one.
246 tmp = buf + count;
248 err = probe_kernel_read(tmp, mem, count);
249 if (err)
250 return NULL;
251 while (count > 0) {
252 buf = hex_byte_pack(buf, *tmp);
253 tmp++;
254 count--;
256 *buf = 0;
258 return buf;
262 * Convert the hex array pointed to by buf into binary to be placed in
263 * mem. Return a pointer to the character AFTER the last byte
264 * written. May return an error.
266 int kgdb_hex2mem(char *buf, char *mem, int count)
268 char *tmp_raw;
269 char *tmp_hex;
272 * We use the upper half of buf as an intermediate buffer for the
273 * raw memory that is converted from hex.
275 tmp_raw = buf + count * 2;
277 tmp_hex = tmp_raw - 1;
278 while (tmp_hex >= buf) {
279 tmp_raw--;
280 *tmp_raw = hex_to_bin(*tmp_hex--);
281 *tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
284 return probe_kernel_write(mem, tmp_raw, count);
288 * While we find nice hex chars, build a long_val.
289 * Return number of chars processed.
291 int kgdb_hex2long(char **ptr, unsigned long *long_val)
293 int hex_val;
294 int num = 0;
295 int negate = 0;
297 *long_val = 0;
299 if (**ptr == '-') {
300 negate = 1;
301 (*ptr)++;
303 while (**ptr) {
304 hex_val = hex_to_bin(**ptr);
305 if (hex_val < 0)
306 break;
308 *long_val = (*long_val << 4) | hex_val;
309 num++;
310 (*ptr)++;
313 if (negate)
314 *long_val = -*long_val;
316 return num;
320 * Copy the binary array pointed to by buf into mem. Fix $, #, and
321 * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
322 * The input buf is overwitten with the result to write to mem.
324 static int kgdb_ebin2mem(char *buf, char *mem, int count)
326 int size = 0;
327 char *c = buf;
329 while (count-- > 0) {
330 c[size] = *buf++;
331 if (c[size] == 0x7d)
332 c[size] = *buf++ ^ 0x20;
333 size++;
336 return probe_kernel_write(mem, c, size);
339 #if DBG_MAX_REG_NUM > 0
340 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
342 int i;
343 int idx = 0;
344 char *ptr = (char *)gdb_regs;
346 for (i = 0; i < DBG_MAX_REG_NUM; i++) {
347 dbg_get_reg(i, ptr + idx, regs);
348 idx += dbg_reg_def[i].size;
352 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
354 int i;
355 int idx = 0;
356 char *ptr = (char *)gdb_regs;
358 for (i = 0; i < DBG_MAX_REG_NUM; i++) {
359 dbg_set_reg(i, ptr + idx, regs);
360 idx += dbg_reg_def[i].size;
363 #endif /* DBG_MAX_REG_NUM > 0 */
365 /* Write memory due to an 'M' or 'X' packet. */
366 static int write_mem_msg(int binary)
368 char *ptr = &remcom_in_buffer[1];
369 unsigned long addr;
370 unsigned long length;
371 int err;
373 if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
374 kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
375 if (binary)
376 err = kgdb_ebin2mem(ptr, (char *)addr, length);
377 else
378 err = kgdb_hex2mem(ptr, (char *)addr, length);
379 if (err)
380 return err;
381 if (CACHE_FLUSH_IS_SAFE)
382 flush_icache_range(addr, addr + length);
383 return 0;
386 return -EINVAL;
389 static void error_packet(char *pkt, int error)
391 error = -error;
392 pkt[0] = 'E';
393 pkt[1] = hex_asc[(error / 10)];
394 pkt[2] = hex_asc[(error % 10)];
395 pkt[3] = '\0';
399 * Thread ID accessors. We represent a flat TID space to GDB, where
400 * the per CPU idle threads (which under Linux all have PID 0) are
401 * remapped to negative TIDs.
404 #define BUF_THREAD_ID_SIZE 8
406 static char *pack_threadid(char *pkt, unsigned char *id)
408 unsigned char *limit;
409 int lzero = 1;
411 limit = id + (BUF_THREAD_ID_SIZE / 2);
412 while (id < limit) {
413 if (!lzero || *id != 0) {
414 pkt = hex_byte_pack(pkt, *id);
415 lzero = 0;
417 id++;
420 if (lzero)
421 pkt = hex_byte_pack(pkt, 0);
423 return pkt;
426 static void int_to_threadref(unsigned char *id, int value)
428 put_unaligned_be32(value, id);
431 static struct task_struct *getthread(struct pt_regs *regs, int tid)
434 * Non-positive TIDs are remapped to the cpu shadow information
436 if (tid == 0 || tid == -1)
437 tid = -atomic_read(&kgdb_active) - 2;
438 if (tid < -1 && tid > -NR_CPUS - 2) {
439 if (kgdb_info[-tid - 2].task)
440 return kgdb_info[-tid - 2].task;
441 else
442 return idle_task(-tid - 2);
444 if (tid <= 0) {
445 printk(KERN_ERR "KGDB: Internal thread select error\n");
446 dump_stack();
447 return NULL;
451 * find_task_by_pid_ns() does not take the tasklist lock anymore
452 * but is nicely RCU locked - hence is a pretty resilient
453 * thing to use:
455 return find_task_by_pid_ns(tid, &init_pid_ns);
460 * Remap normal tasks to their real PID,
461 * CPU shadow threads are mapped to -CPU - 2
463 static inline int shadow_pid(int realpid)
465 if (realpid)
466 return realpid;
468 return -raw_smp_processor_id() - 2;
472 * All the functions that start with gdb_cmd are the various
473 * operations to implement the handlers for the gdbserial protocol
474 * where KGDB is communicating with an external debugger
477 /* Handle the '?' status packets */
478 static void gdb_cmd_status(struct kgdb_state *ks)
481 * We know that this packet is only sent
482 * during initial connect. So to be safe,
483 * we clear out our breakpoints now in case
484 * GDB is reconnecting.
486 dbg_remove_all_break();
488 remcom_out_buffer[0] = 'S';
489 hex_byte_pack(&remcom_out_buffer[1], ks->signo);
492 static void gdb_get_regs_helper(struct kgdb_state *ks)
494 struct task_struct *thread;
495 void *local_debuggerinfo;
496 int i;
498 thread = kgdb_usethread;
499 if (!thread) {
500 thread = kgdb_info[ks->cpu].task;
501 local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
502 } else {
503 local_debuggerinfo = NULL;
504 for_each_online_cpu(i) {
506 * Try to find the task on some other
507 * or possibly this node if we do not
508 * find the matching task then we try
509 * to approximate the results.
511 if (thread == kgdb_info[i].task)
512 local_debuggerinfo = kgdb_info[i].debuggerinfo;
517 * All threads that don't have debuggerinfo should be
518 * in schedule() sleeping, since all other CPUs
519 * are in kgdb_wait, and thus have debuggerinfo.
521 if (local_debuggerinfo) {
522 pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
523 } else {
525 * Pull stuff saved during switch_to; nothing
526 * else is accessible (or even particularly
527 * relevant).
529 * This should be enough for a stack trace.
531 sleeping_thread_to_gdb_regs(gdb_regs, thread);
535 /* Handle the 'g' get registers request */
536 static void gdb_cmd_getregs(struct kgdb_state *ks)
538 gdb_get_regs_helper(ks);
539 kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
542 /* Handle the 'G' set registers request */
543 static void gdb_cmd_setregs(struct kgdb_state *ks)
545 kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
547 if (kgdb_usethread && kgdb_usethread != current) {
548 error_packet(remcom_out_buffer, -EINVAL);
549 } else {
550 gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
551 strcpy(remcom_out_buffer, "OK");
555 /* Handle the 'm' memory read bytes */
556 static void gdb_cmd_memread(struct kgdb_state *ks)
558 char *ptr = &remcom_in_buffer[1];
559 unsigned long length;
560 unsigned long addr;
561 char *err;
563 if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
564 kgdb_hex2long(&ptr, &length) > 0) {
565 err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
566 if (!err)
567 error_packet(remcom_out_buffer, -EINVAL);
568 } else {
569 error_packet(remcom_out_buffer, -EINVAL);
573 /* Handle the 'M' memory write bytes */
574 static void gdb_cmd_memwrite(struct kgdb_state *ks)
576 int err = write_mem_msg(0);
578 if (err)
579 error_packet(remcom_out_buffer, err);
580 else
581 strcpy(remcom_out_buffer, "OK");
584 #if DBG_MAX_REG_NUM > 0
585 static char *gdb_hex_reg_helper(int regnum, char *out)
587 int i;
588 int offset = 0;
590 for (i = 0; i < regnum; i++)
591 offset += dbg_reg_def[i].size;
592 return kgdb_mem2hex((char *)gdb_regs + offset, out,
593 dbg_reg_def[i].size);
596 /* Handle the 'p' individual regster get */
597 static void gdb_cmd_reg_get(struct kgdb_state *ks)
599 unsigned long regnum;
600 char *ptr = &remcom_in_buffer[1];
602 kgdb_hex2long(&ptr, &regnum);
603 if (regnum >= DBG_MAX_REG_NUM) {
604 error_packet(remcom_out_buffer, -EINVAL);
605 return;
607 gdb_get_regs_helper(ks);
608 gdb_hex_reg_helper(regnum, remcom_out_buffer);
611 /* Handle the 'P' individual regster set */
612 static void gdb_cmd_reg_set(struct kgdb_state *ks)
614 unsigned long regnum;
615 char *ptr = &remcom_in_buffer[1];
616 int i = 0;
618 kgdb_hex2long(&ptr, &regnum);
619 if (*ptr++ != '=' ||
620 !(!kgdb_usethread || kgdb_usethread == current) ||
621 !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
622 error_packet(remcom_out_buffer, -EINVAL);
623 return;
625 memset(gdb_regs, 0, sizeof(gdb_regs));
626 while (i < sizeof(gdb_regs) * 2)
627 if (hex_to_bin(ptr[i]) >= 0)
628 i++;
629 else
630 break;
631 i = i / 2;
632 kgdb_hex2mem(ptr, (char *)gdb_regs, i);
633 dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
634 strcpy(remcom_out_buffer, "OK");
636 #endif /* DBG_MAX_REG_NUM > 0 */
638 /* Handle the 'X' memory binary write bytes */
639 static void gdb_cmd_binwrite(struct kgdb_state *ks)
641 int err = write_mem_msg(1);
643 if (err)
644 error_packet(remcom_out_buffer, err);
645 else
646 strcpy(remcom_out_buffer, "OK");
649 /* Handle the 'D' or 'k', detach or kill packets */
650 static void gdb_cmd_detachkill(struct kgdb_state *ks)
652 int error;
654 /* The detach case */
655 if (remcom_in_buffer[0] == 'D') {
656 error = dbg_remove_all_break();
657 if (error < 0) {
658 error_packet(remcom_out_buffer, error);
659 } else {
660 strcpy(remcom_out_buffer, "OK");
661 kgdb_connected = 0;
663 put_packet(remcom_out_buffer);
664 } else {
666 * Assume the kill case, with no exit code checking,
667 * trying to force detach the debugger:
669 dbg_remove_all_break();
670 kgdb_connected = 0;
674 /* Handle the 'R' reboot packets */
675 static int gdb_cmd_reboot(struct kgdb_state *ks)
677 /* For now, only honor R0 */
678 if (strcmp(remcom_in_buffer, "R0") == 0) {
679 printk(KERN_CRIT "Executing emergency reboot\n");
680 strcpy(remcom_out_buffer, "OK");
681 put_packet(remcom_out_buffer);
684 * Execution should not return from
685 * machine_emergency_restart()
687 machine_emergency_restart();
688 kgdb_connected = 0;
690 return 1;
692 return 0;
695 /* Handle the 'q' query packets */
696 static void gdb_cmd_query(struct kgdb_state *ks)
698 struct task_struct *g;
699 struct task_struct *p;
700 unsigned char thref[BUF_THREAD_ID_SIZE];
701 char *ptr;
702 int i;
703 int cpu;
704 int finished = 0;
706 switch (remcom_in_buffer[1]) {
707 case 's':
708 case 'f':
709 if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
710 break;
712 i = 0;
713 remcom_out_buffer[0] = 'm';
714 ptr = remcom_out_buffer + 1;
715 if (remcom_in_buffer[1] == 'f') {
716 /* Each cpu is a shadow thread */
717 for_each_online_cpu(cpu) {
718 ks->thr_query = 0;
719 int_to_threadref(thref, -cpu - 2);
720 ptr = pack_threadid(ptr, thref);
721 *(ptr++) = ',';
722 i++;
726 do_each_thread(g, p) {
727 if (i >= ks->thr_query && !finished) {
728 int_to_threadref(thref, p->pid);
729 ptr = pack_threadid(ptr, thref);
730 *(ptr++) = ',';
731 ks->thr_query++;
732 if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
733 finished = 1;
735 i++;
736 } while_each_thread(g, p);
738 *(--ptr) = '\0';
739 break;
741 case 'C':
742 /* Current thread id */
743 strcpy(remcom_out_buffer, "QC");
744 ks->threadid = shadow_pid(current->pid);
745 int_to_threadref(thref, ks->threadid);
746 pack_threadid(remcom_out_buffer + 2, thref);
747 break;
748 case 'T':
749 if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
750 break;
752 ks->threadid = 0;
753 ptr = remcom_in_buffer + 17;
754 kgdb_hex2long(&ptr, &ks->threadid);
755 if (!getthread(ks->linux_regs, ks->threadid)) {
756 error_packet(remcom_out_buffer, -EINVAL);
757 break;
759 if ((int)ks->threadid > 0) {
760 kgdb_mem2hex(getthread(ks->linux_regs,
761 ks->threadid)->comm,
762 remcom_out_buffer, 16);
763 } else {
764 static char tmpstr[23 + BUF_THREAD_ID_SIZE];
766 sprintf(tmpstr, "shadowCPU%d",
767 (int)(-ks->threadid - 2));
768 kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
770 break;
771 #ifdef CONFIG_KGDB_KDB
772 case 'R':
773 if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
774 int len = strlen(remcom_in_buffer + 6);
776 if ((len % 2) != 0) {
777 strcpy(remcom_out_buffer, "E01");
778 break;
780 kgdb_hex2mem(remcom_in_buffer + 6,
781 remcom_out_buffer, len);
782 len = len / 2;
783 remcom_out_buffer[len++] = 0;
785 kdb_parse(remcom_out_buffer);
786 strcpy(remcom_out_buffer, "OK");
788 break;
789 #endif
793 /* Handle the 'H' task query packets */
794 static void gdb_cmd_task(struct kgdb_state *ks)
796 struct task_struct *thread;
797 char *ptr;
799 switch (remcom_in_buffer[1]) {
800 case 'g':
801 ptr = &remcom_in_buffer[2];
802 kgdb_hex2long(&ptr, &ks->threadid);
803 thread = getthread(ks->linux_regs, ks->threadid);
804 if (!thread && ks->threadid > 0) {
805 error_packet(remcom_out_buffer, -EINVAL);
806 break;
808 kgdb_usethread = thread;
809 ks->kgdb_usethreadid = ks->threadid;
810 strcpy(remcom_out_buffer, "OK");
811 break;
812 case 'c':
813 ptr = &remcom_in_buffer[2];
814 kgdb_hex2long(&ptr, &ks->threadid);
815 if (!ks->threadid) {
816 kgdb_contthread = NULL;
817 } else {
818 thread = getthread(ks->linux_regs, ks->threadid);
819 if (!thread && ks->threadid > 0) {
820 error_packet(remcom_out_buffer, -EINVAL);
821 break;
823 kgdb_contthread = thread;
825 strcpy(remcom_out_buffer, "OK");
826 break;
830 /* Handle the 'T' thread query packets */
831 static void gdb_cmd_thread(struct kgdb_state *ks)
833 char *ptr = &remcom_in_buffer[1];
834 struct task_struct *thread;
836 kgdb_hex2long(&ptr, &ks->threadid);
837 thread = getthread(ks->linux_regs, ks->threadid);
838 if (thread)
839 strcpy(remcom_out_buffer, "OK");
840 else
841 error_packet(remcom_out_buffer, -EINVAL);
844 /* Handle the 'z' or 'Z' breakpoint remove or set packets */
845 static void gdb_cmd_break(struct kgdb_state *ks)
848 * Since GDB-5.3, it's been drafted that '0' is a software
849 * breakpoint, '1' is a hardware breakpoint, so let's do that.
851 char *bpt_type = &remcom_in_buffer[1];
852 char *ptr = &remcom_in_buffer[2];
853 unsigned long addr;
854 unsigned long length;
855 int error = 0;
857 if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
858 /* Unsupported */
859 if (*bpt_type > '4')
860 return;
861 } else {
862 if (*bpt_type != '0' && *bpt_type != '1')
863 /* Unsupported. */
864 return;
868 * Test if this is a hardware breakpoint, and
869 * if we support it:
871 if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
872 /* Unsupported. */
873 return;
875 if (*(ptr++) != ',') {
876 error_packet(remcom_out_buffer, -EINVAL);
877 return;
879 if (!kgdb_hex2long(&ptr, &addr)) {
880 error_packet(remcom_out_buffer, -EINVAL);
881 return;
883 if (*(ptr++) != ',' ||
884 !kgdb_hex2long(&ptr, &length)) {
885 error_packet(remcom_out_buffer, -EINVAL);
886 return;
889 if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
890 error = dbg_set_sw_break(addr);
891 else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
892 error = dbg_remove_sw_break(addr);
893 else if (remcom_in_buffer[0] == 'Z')
894 error = arch_kgdb_ops.set_hw_breakpoint(addr,
895 (int)length, *bpt_type - '0');
896 else if (remcom_in_buffer[0] == 'z')
897 error = arch_kgdb_ops.remove_hw_breakpoint(addr,
898 (int) length, *bpt_type - '0');
900 if (error == 0)
901 strcpy(remcom_out_buffer, "OK");
902 else
903 error_packet(remcom_out_buffer, error);
906 /* Handle the 'C' signal / exception passing packets */
907 static int gdb_cmd_exception_pass(struct kgdb_state *ks)
909 /* C09 == pass exception
910 * C15 == detach kgdb, pass exception
912 if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
914 ks->pass_exception = 1;
915 remcom_in_buffer[0] = 'c';
917 } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
919 ks->pass_exception = 1;
920 remcom_in_buffer[0] = 'D';
921 dbg_remove_all_break();
922 kgdb_connected = 0;
923 return 1;
925 } else {
926 gdbstub_msg_write("KGDB only knows signal 9 (pass)"
927 " and 15 (pass and disconnect)\n"
928 "Executing a continue without signal passing\n", 0);
929 remcom_in_buffer[0] = 'c';
932 /* Indicate fall through */
933 return -1;
937 * This function performs all gdbserial command procesing
939 int gdb_serial_stub(struct kgdb_state *ks)
941 int error = 0;
942 int tmp;
944 /* Initialize comm buffer and globals. */
945 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
946 kgdb_usethread = kgdb_info[ks->cpu].task;
947 ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
948 ks->pass_exception = 0;
950 if (kgdb_connected) {
951 unsigned char thref[BUF_THREAD_ID_SIZE];
952 char *ptr;
954 /* Reply to host that an exception has occurred */
955 ptr = remcom_out_buffer;
956 *ptr++ = 'T';
957 ptr = hex_byte_pack(ptr, ks->signo);
958 ptr += strlen(strcpy(ptr, "thread:"));
959 int_to_threadref(thref, shadow_pid(current->pid));
960 ptr = pack_threadid(ptr, thref);
961 *ptr++ = ';';
962 put_packet(remcom_out_buffer);
965 while (1) {
966 error = 0;
968 /* Clear the out buffer. */
969 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
971 get_packet(remcom_in_buffer);
973 switch (remcom_in_buffer[0]) {
974 case '?': /* gdbserial status */
975 gdb_cmd_status(ks);
976 break;
977 case 'g': /* return the value of the CPU registers */
978 gdb_cmd_getregs(ks);
979 break;
980 case 'G': /* set the value of the CPU registers - return OK */
981 gdb_cmd_setregs(ks);
982 break;
983 case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
984 gdb_cmd_memread(ks);
985 break;
986 case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
987 gdb_cmd_memwrite(ks);
988 break;
989 #if DBG_MAX_REG_NUM > 0
990 case 'p': /* pXX Return gdb register XX (in hex) */
991 gdb_cmd_reg_get(ks);
992 break;
993 case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
994 gdb_cmd_reg_set(ks);
995 break;
996 #endif /* DBG_MAX_REG_NUM > 0 */
997 case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
998 gdb_cmd_binwrite(ks);
999 break;
1000 /* kill or detach. KGDB should treat this like a
1001 * continue.
1003 case 'D': /* Debugger detach */
1004 case 'k': /* Debugger detach via kill */
1005 gdb_cmd_detachkill(ks);
1006 goto default_handle;
1007 case 'R': /* Reboot */
1008 if (gdb_cmd_reboot(ks))
1009 goto default_handle;
1010 break;
1011 case 'q': /* query command */
1012 gdb_cmd_query(ks);
1013 break;
1014 case 'H': /* task related */
1015 gdb_cmd_task(ks);
1016 break;
1017 case 'T': /* Query thread status */
1018 gdb_cmd_thread(ks);
1019 break;
1020 case 'z': /* Break point remove */
1021 case 'Z': /* Break point set */
1022 gdb_cmd_break(ks);
1023 break;
1024 #ifdef CONFIG_KGDB_KDB
1025 case '3': /* Escape into back into kdb */
1026 if (remcom_in_buffer[1] == '\0') {
1027 gdb_cmd_detachkill(ks);
1028 return DBG_PASS_EVENT;
1030 #endif
1031 case 'C': /* Exception passing */
1032 tmp = gdb_cmd_exception_pass(ks);
1033 if (tmp > 0)
1034 goto default_handle;
1035 if (tmp == 0)
1036 break;
1037 /* Fall through on tmp < 0 */
1038 case 'c': /* Continue packet */
1039 case 's': /* Single step packet */
1040 if (kgdb_contthread && kgdb_contthread != current) {
1041 /* Can't switch threads in kgdb */
1042 error_packet(remcom_out_buffer, -EINVAL);
1043 break;
1045 dbg_activate_sw_breakpoints();
1046 /* Fall through to default processing */
1047 default:
1048 default_handle:
1049 error = kgdb_arch_handle_exception(ks->ex_vector,
1050 ks->signo,
1051 ks->err_code,
1052 remcom_in_buffer,
1053 remcom_out_buffer,
1054 ks->linux_regs);
1056 * Leave cmd processing on error, detach,
1057 * kill, continue, or single step.
1059 if (error >= 0 || remcom_in_buffer[0] == 'D' ||
1060 remcom_in_buffer[0] == 'k') {
1061 error = 0;
1062 goto kgdb_exit;
1067 /* reply to the request */
1068 put_packet(remcom_out_buffer);
1071 kgdb_exit:
1072 if (ks->pass_exception)
1073 error = 1;
1074 return error;
1077 int gdbstub_state(struct kgdb_state *ks, char *cmd)
1079 int error;
1081 switch (cmd[0]) {
1082 case 'e':
1083 error = kgdb_arch_handle_exception(ks->ex_vector,
1084 ks->signo,
1085 ks->err_code,
1086 remcom_in_buffer,
1087 remcom_out_buffer,
1088 ks->linux_regs);
1089 return error;
1090 case 's':
1091 case 'c':
1092 strcpy(remcom_in_buffer, cmd);
1093 return 0;
1094 case '$':
1095 strcpy(remcom_in_buffer, cmd);
1096 gdbstub_use_prev_in_buf = strlen(remcom_in_buffer);
1097 gdbstub_prev_in_buf_pos = 0;
1098 return 0;
1100 dbg_io_ops->write_char('+');
1101 put_packet(remcom_out_buffer);
1102 return 0;
1106 * gdbstub_exit - Send an exit message to GDB
1107 * @status: The exit code to report.
1109 void gdbstub_exit(int status)
1111 unsigned char checksum, ch, buffer[3];
1112 int loop;
1114 buffer[0] = 'W';
1115 buffer[1] = hex_asc_hi(status);
1116 buffer[2] = hex_asc_lo(status);
1118 dbg_io_ops->write_char('$');
1119 checksum = 0;
1121 for (loop = 0; loop < 3; loop++) {
1122 ch = buffer[loop];
1123 checksum += ch;
1124 dbg_io_ops->write_char(ch);
1127 dbg_io_ops->write_char('#');
1128 dbg_io_ops->write_char(hex_asc_hi(checksum));
1129 dbg_io_ops->write_char(hex_asc_lo(checksum));
1131 /* make sure the output is flushed, lest the bootloader clobber it */
1132 dbg_io_ops->flush();