Linux: fix zfs_uio_dio_check_for_zero_page

[zfs.git] / man / man8 / zfs-receive.8

.\"
.\" CDDL HEADER START
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or https://opensource.org/licenses/CDDL-1.0.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\" CDDL HEADER END
.\"
.\" Copyright (c) 2009 Sun Microsystems, Inc. All Rights Reserved.
.\" Copyright 2011 Joshua M. Clulow <josh@sysmgr.org>
.\" Copyright (c) 2011, 2019 by Delphix. All rights reserved.
.\" Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
.\" Copyright (c) 2014, Joyent, Inc. All rights reserved.
.\" Copyright (c) 2014 by Adam Stevko. All rights reserved.
.\" Copyright (c) 2014 Integros [integros.com]
.\" Copyright 2019 Richard Laager. All rights reserved.
.\" Copyright 2018 Nexenta Systems, Inc.
.\" Copyright 2019 Joyent, Inc.
.\"
.Dd March 12, 2023
.Dt ZFS-RECEIVE 8
.Os
.
.Sh NAME
.Nm zfs-receive
.Nd create snapshot from backup stream
.Sh SYNOPSIS
.Nm zfs
.Cm receive
.Op Fl FhMnsuv
.Op Fl o Sy origin Ns = Ns Ar snapshot
.Op Fl o Ar property Ns = Ns Ar value
.Op Fl x Ar property
.Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
.Nm zfs
.Cm receive
.Op Fl FhMnsuv
.Op Fl d Ns | Ns Fl e
.Op Fl o Sy origin Ns = Ns Ar snapshot
.Op Fl o Ar property Ns = Ns Ar value
.Op Fl x Ar property
.Ar filesystem
.Nm zfs
.Cm receive
.Fl A
.Ar filesystem Ns | Ns Ar volume
.Nm zfs
.Cm receive
.Fl c
.Op Fl vn
.Ar filesystem Ns | Ns Ar snapshot
.
.Sh DESCRIPTION
.Bl -tag -width ""
.It Xo
.Nm zfs
.Cm receive
.Op Fl FhMnsuv
.Op Fl o Sy origin Ns = Ns Ar snapshot
.Op Fl o Ar property Ns = Ns Ar value
.Op Fl x Ar property
.Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
.Xc
.It Xo
.Nm zfs
.Cm receive
.Op Fl FhMnsuv
.Op Fl d Ns | Ns Fl e
.Op Fl o Sy origin Ns = Ns Ar snapshot
.Op Fl o Ar property Ns = Ns Ar value
.Op Fl x Ar property
.Ar filesystem
.Xc
Creates a snapshot whose contents are as specified in the stream provided on
standard input.
If a full stream is received, then a new file system is created as well.
Streams are created using the
.Nm zfs Cm send
subcommand, which by default creates a full stream.
.Nm zfs Cm recv
can be used as an alias for
.Nm zfs Cm receive .
.Pp
If an incremental stream is received, then the destination file system must
already exist, and its most recent snapshot must match the incremental stream's
source.
For
.Sy zvols ,
the destination device link is destroyed and recreated, which means the
.Sy zvol
cannot be accessed during the
.Cm receive
operation.
.Pp
When a snapshot replication package stream that is generated by using the
.Nm zfs Cm send Fl R
command is received, any snapshots that do not exist on the sending location are
destroyed by using the
.Nm zfs Cm destroy Fl d
command.
.Pp
The ability to send and receive deduplicated send streams has been removed.
However, a deduplicated send stream created with older software can be converted
to a regular (non-deduplicated) stream by using the
.Nm zstream Cm redup
command.
.Pp
If
.Fl o Em property Ns = Ns Ar value
or
.Fl x Em property
is specified, it applies to the effective value of the property throughout
the entire subtree of replicated datasets.
Effective property values will be set
.Pq Fl o
or inherited
.Pq Fl x
on the topmost in the replicated subtree.
In descendant datasets, if the
property is set by the send stream, it will be overridden by forcing the
property to be inherited from the top‐most file system.
Received properties are retained in spite of being overridden
and may be restored with
.Nm zfs Cm inherit Fl S .
Specifying
.Fl o Sy origin Ns = Ns Em snapshot
is a special case because, even if
.Sy origin
is a read-only property and cannot be set, it's allowed to receive the send
stream as a clone of the given snapshot.
.Pp
Raw encrypted send streams (created with
.Nm zfs Cm send Fl w )
may only be received as is, and cannot be re-encrypted, decrypted, or
recompressed by the receive process.
Unencrypted streams can be received as
encrypted datasets, either through inheritance or by specifying encryption
parameters with the
.Fl o
options.
Note that the
.Sy keylocation
property cannot be overridden to
.Sy prompt
during a receive.
This is because the receive process itself is already using
the standard input for the send stream.
Instead, the property can be overridden after the receive completes.
.Pp
The added security provided by raw sends adds some restrictions to the send
and receive process.
ZFS will not allow a mix of raw receives and non-raw receives.
Specifically, any raw incremental receives that are attempted after
a non-raw receive will fail.
Non-raw receives do not have this restriction and,
therefore, are always possible.
Because of this, it is best practice to always
use either raw sends for their security benefits or non-raw sends for their
flexibility when working with encrypted datasets, but not a combination.
.Pp
The reason for this restriction stems from the inherent restrictions of the
AEAD ciphers that ZFS uses to encrypt data.
When using ZFS native encryption,
each block of data is encrypted against a randomly generated number known as
the "initialization vector" (IV), which is stored in the filesystem metadata.
This number is required by the encryption algorithms whenever the data is to
be decrypted.
Together, all of the IVs provided for all of the blocks in a
given snapshot are collectively called an "IV set".
When ZFS performs a raw send, the IV set is transferred from the source
to the destination in the send stream.
When ZFS performs a non-raw send, the data is decrypted by the source
system and re-encrypted by the destination system, creating a snapshot with
effectively the same data, but a different IV set.
In order for decryption to work after a raw send, ZFS must ensure that
the IV set used on both the source and destination side match.
When an incremental raw receive is performed on
top of an existing snapshot, ZFS will check to confirm that the "from"
snapshot on both the source and destination were using the same IV set,
ensuring the new IV set is consistent.
.Pp
The name of the snapshot
.Pq and file system, if a full stream is received
that this subcommand creates depends on the argument type and the use of the
.Fl d
or
.Fl e
options.
.Pp
If the argument is a snapshot name, the specified
.Ar snapshot
is created.
If the argument is a file system or volume name, a snapshot with the same name
as the sent snapshot is created within the specified
.Ar filesystem
or
.Ar volume .
If neither of the
.Fl d
or
.Fl e
options are specified, the provided target snapshot name is used exactly as
provided.
.Pp
The
.Fl d
and
.Fl e
options cause the file system name of the target snapshot to be determined by
appending a portion of the sent snapshot's name to the specified target
.Ar filesystem .
If the
.Fl d
option is specified, all but the first element of the sent snapshot's file
system path
.Pq usually the pool name
is used and any required intermediate file systems within the specified one are
created.
If the
.Fl e
option is specified, then only the last element of the sent snapshot's file
system name
.Pq i.e. the name of the source file system itself
is used as the target file system name.
.Bl -tag -width "-F"
.It Fl F
Force a rollback of the file system to the most recent snapshot before
performing the receive operation.
If receiving an incremental replication stream
.Po for example, one generated by
.Nm zfs Cm send Fl R Op Fl i Ns | Ns Fl I
.Pc ,
destroy snapshots and file systems that do not exist on the sending side.
.It Fl d
Discard the first element of the sent snapshot's file system name, using the
remaining elements to determine the name of the target file system for the new
snapshot as described in the paragraph above.
.It Fl e
Discard all but the last element of the sent snapshot's file system name, using
that element to determine the name of the target file system for the new
snapshot as described in the paragraph above.
.It Fl h
Skip the receive of holds.
There is no effect if holds are not sent.
.It Fl M
Force an unmount of the file system while receiving a snapshot.
This option is not supported on Linux.
.It Fl n
Do not actually receive the stream.
This can be useful in conjunction with the
.Fl v
option to verify the name the receive operation would use.
.It Fl o Sy origin Ns = Ns Ar snapshot
Forces the stream to be received as a clone of the given snapshot.
If the stream is a full send stream, this will create the filesystem
described by the stream as a clone of the specified snapshot.
Which snapshot was specified will not affect the success or failure of the
receive, as long as the snapshot does exist.
If the stream is an incremental send stream, all the normal verification will be
performed.
.It Fl o Em property Ns = Ns Ar value
Sets the specified property as if the command
.Nm zfs Cm set Em property Ns = Ns Ar value
was invoked immediately before the receive.
When receiving a stream from
.Nm zfs Cm send Fl R ,
causes the property to be inherited by all descendant datasets, as through
.Nm zfs Cm inherit Em property
was run on any descendant datasets that have this property set on the
sending system.
.Pp
If the send stream was sent with
.Fl c
then overriding the
.Sy compression
property will have no effect on received data but the
.Sy compression
property will be set.
To have the data recompressed on receive remove the
.Fl c
flag from the send stream.
.Pp
Any editable property can be set at receive time.
Set-once properties bound
to the received data, such as
.Sy normalization
and
.Sy casesensitivity ,
cannot be set at receive time even when the datasets are newly created by
.Nm zfs Cm receive .
Additionally both settable properties
.Sy version
and
.Sy volsize
cannot be set at receive time.
.Pp
The
.Fl o
option may be specified multiple times, for different properties.
An error results if the same property is specified in multiple
.Fl o
or
.Fl x
options.
.Pp
The
.Fl o
option may also be used to override encryption properties upon initial receive.
This allows unencrypted streams to be received as encrypted datasets.
To cause the received dataset (or root dataset of a recursive stream) to be
received as an encryption root, specify encryption properties in the same
manner as is required for
.Nm zfs Cm create .
For instance:
.Dl # Nm zfs Cm send Pa tank/test@snap1 | Nm zfs Cm recv Fl o Sy encryption Ns = Ns Sy on Fl o Sy keyformat Ns = Ns Sy passphrase Fl o Sy keylocation Ns = Ns Pa file:///path/to/keyfile
.Pp
Note that
.Fl o Sy keylocation Ns = Ns Sy prompt
may not be specified here, since the standard input
is already being utilized for the send stream.
Once the receive has completed, you can use
.Nm zfs Cm set
to change this setting after the fact.
Similarly, you can receive a dataset as an encrypted child by specifying
.Fl x Sy encryption
to force the property to be inherited.
Overriding encryption properties (except for
.Sy keylocation )
is not possible with raw send streams.
.It Fl s
If the receive is interrupted, save the partially received state, rather
than deleting it.
Interruption may be due to premature termination of the stream
.Po e.g. due to network failure or failure of the remote system
if the stream is being read over a network connection
.Pc ,
a checksum error in the stream, termination of the
.Nm zfs Cm receive
process, or unclean shutdown of the system.
.Pp
The receive can be resumed with a stream generated by
.Nm zfs Cm send Fl t Ar token ,
where the
.Ar token
is the value of the
.Sy receive_resume_token
property of the filesystem or volume which is received into.
.Pp
To use this flag, the storage pool must have the
.Sy extensible_dataset
feature enabled.
See
.Xr zpool-features 7
for details on ZFS feature flags.
.It Fl u
File system that is associated with the received stream is not mounted.
.It Fl v
Print verbose information about the stream and the time required to perform the
receive operation.
.It Fl x Em property
Ensures that the effective value of the specified property after the
receive is unaffected by the value of that property in the send stream (if any),
as if the property had been excluded from the send stream.
.Pp
If the specified property is not present in the send stream, this option does
nothing.
.Pp
If a received property needs to be overridden, the effective value will be
set or inherited, depending on whether the property is inheritable or not.
.Pp
In the case of an incremental update,
.Fl x
leaves any existing local setting or explicit inheritance unchanged.
.Pp
All
.Fl o
restrictions (e.g. set-once) apply equally to
.Fl x .
.El
.It Xo
.Nm zfs
.Cm receive
.Fl A
.Ar filesystem Ns | Ns Ar volume
.Xc
Abort an interrupted
.Nm zfs Cm receive Fl s ,
deleting its saved partially received state.
.It Xo
.Nm zfs
.Cm receive
.Fl c
.Op Fl vn
.Ar filesystem Ns | Ns Ar snapshot
.Xc
Attempt to repair data corruption in the specified dataset,
by using the provided stream as the source of healthy data.
This method of healing can only heal data blocks present in the stream.
Metadata can not be healed by corrective receive.
Running a scrub is recommended post-healing to ensure all data corruption was
repaired.
.Pp
It's important to consider why corruption has happened in the first place.
If you have slowly failing hardware - periodically repairing the data
is not going to save you from data loss later on when the hardware fails
completely.
.El
.
.Sh EXAMPLES
.\" These are, respectively, examples 12, 13 from zfs.8
.\" Make sure to update them bidirectionally
.Ss Example 1 : No Remotely Replicating ZFS Data
The following commands send a full stream and then an incremental stream to a
remote machine, restoring them into
.Em poolB/received/fs@a
and
.Em poolB/received/fs@b ,
respectively.
.Em poolB
must contain the file system
.Em poolB/received ,
and must not initially contain
.Em poolB/received/fs .
.Bd -literal -compact -offset Ds
.No # Nm zfs Cm send Ar pool/fs@a |
.No "   " Nm ssh Ar host Nm zfs Cm receive Ar poolB/received/fs Ns @ Ns Ar a
.No # Nm zfs Cm send Fl i Ar a pool/fs@b |
.No "   " Nm ssh Ar host Nm zfs Cm receive Ar poolB/received/fs
.Ed
.
.Ss Example 2 : No Using the Nm zfs Cm receive Fl d No Option
The following command sends a full stream of
.Ar poolA/fsA/fsB@snap
to a remote machine, receiving it into
.Ar poolB/received/fsA/fsB@snap .
The
.Ar fsA/fsB@snap
portion of the received snapshot's name is determined from the name of the sent
snapshot.
.Ar poolB
must contain the file system
.Ar poolB/received .
If
.Ar poolB/received/fsA
does not exist, it is created as an empty file system.
.Bd -literal -compact -offset Ds
.No # Nm zfs Cm send Ar poolA/fsA/fsB@snap |
.No "   " Nm ssh Ar host Nm zfs Cm receive Fl d Ar poolB/received
.Ed
.
.Sh SEE ALSO
.Xr zfs-send 8 ,
.Xr zstream 8