Improve speculative prefetcher for block cloning
[zfs.git] / module / zfs / dmu.c
blob4830f4850a31fab43aab39af20aa2618815562ae
1 /*
2 * CDDL HEADER START
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or https://opensource.org/licenses/CDDL-1.0.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
19 * CDDL HEADER END
22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
23 * Copyright (c) 2011, 2020 by Delphix. All rights reserved.
24 * Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
25 * Copyright (c) 2013, Joyent, Inc. All rights reserved.
26 * Copyright (c) 2016, Nexenta Systems, Inc. All rights reserved.
27 * Copyright (c) 2015 by Chunwei Chen. All rights reserved.
28 * Copyright (c) 2019 Datto Inc.
29 * Copyright (c) 2019, 2023, Klara Inc.
30 * Copyright (c) 2019, Allan Jude
31 * Copyright (c) 2022 Hewlett Packard Enterprise Development LP.
32 * Copyright (c) 2021, 2022 by Pawel Jakub Dawidek
35 #include <sys/dmu.h>
36 #include <sys/dmu_impl.h>
37 #include <sys/dmu_tx.h>
38 #include <sys/dbuf.h>
39 #include <sys/dnode.h>
40 #include <sys/zfs_context.h>
41 #include <sys/dmu_objset.h>
42 #include <sys/dmu_traverse.h>
43 #include <sys/dsl_dataset.h>
44 #include <sys/dsl_dir.h>
45 #include <sys/dsl_pool.h>
46 #include <sys/dsl_synctask.h>
47 #include <sys/dsl_prop.h>
48 #include <sys/dmu_zfetch.h>
49 #include <sys/zfs_ioctl.h>
50 #include <sys/zap.h>
51 #include <sys/zio_checksum.h>
52 #include <sys/zio_compress.h>
53 #include <sys/sa.h>
54 #include <sys/zfeature.h>
55 #include <sys/abd.h>
56 #include <sys/brt.h>
57 #include <sys/trace_zfs.h>
58 #include <sys/zfs_racct.h>
59 #include <sys/zfs_rlock.h>
60 #ifdef _KERNEL
61 #include <sys/vmsystm.h>
62 #include <sys/zfs_znode.h>
63 #endif
66 * Enable/disable nopwrite feature.
68 static int zfs_nopwrite_enabled = 1;
71 * Tunable to control percentage of dirtied L1 blocks from frees allowed into
72 * one TXG. After this threshold is crossed, additional dirty blocks from frees
73 * will wait until the next TXG.
74 * A value of zero will disable this throttle.
76 static uint_t zfs_per_txg_dirty_frees_percent = 30;
79 * Enable/disable forcing txg sync when dirty checking for holes with lseek().
80 * By default this is enabled to ensure accurate hole reporting, it can result
81 * in a significant performance penalty for lseek(SEEK_HOLE) heavy workloads.
82 * Disabling this option will result in holes never being reported in dirty
83 * files which is always safe.
85 static int zfs_dmu_offset_next_sync = 1;
88 * Limit the amount we can prefetch with one call to this amount. This
89 * helps to limit the amount of memory that can be used by prefetching.
90 * Larger objects should be prefetched a bit at a time.
92 #ifdef _ILP32
93 uint_t dmu_prefetch_max = 8 * 1024 * 1024;
94 #else
95 uint_t dmu_prefetch_max = 8 * SPA_MAXBLOCKSIZE;
96 #endif
99 * Override copies= for dedup state objects. 0 means the traditional behaviour
100 * (ie the default for the containing objset ie 3 for the MOS).
102 uint_t dmu_ddt_copies = 0;
104 const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES] = {
105 {DMU_BSWAP_UINT8, TRUE, FALSE, FALSE, "unallocated" },
106 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "object directory" },
107 {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "object array" },
108 {DMU_BSWAP_UINT8, TRUE, FALSE, FALSE, "packed nvlist" },
109 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "packed nvlist size" },
110 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "bpobj" },
111 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "bpobj header" },
112 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "SPA space map header" },
113 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "SPA space map" },
114 {DMU_BSWAP_UINT64, TRUE, FALSE, TRUE, "ZIL intent log" },
115 {DMU_BSWAP_DNODE, TRUE, FALSE, TRUE, "DMU dnode" },
116 {DMU_BSWAP_OBJSET, TRUE, TRUE, FALSE, "DMU objset" },
117 {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "DSL directory" },
118 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL directory child map"},
119 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL dataset snap map" },
120 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL props" },
121 {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "DSL dataset" },
122 {DMU_BSWAP_ZNODE, TRUE, FALSE, FALSE, "ZFS znode" },
123 {DMU_BSWAP_OLDACL, TRUE, FALSE, TRUE, "ZFS V0 ACL" },
124 {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "ZFS plain file" },
125 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS directory" },
126 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "ZFS master node" },
127 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS delete queue" },
128 {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "zvol object" },
129 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "zvol prop" },
130 {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "other uint8[]" },
131 {DMU_BSWAP_UINT64, FALSE, FALSE, TRUE, "other uint64[]" },
132 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "other ZAP" },
133 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "persistent error log" },
134 {DMU_BSWAP_UINT8, TRUE, FALSE, FALSE, "SPA history" },
135 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "SPA history offsets" },
136 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "Pool properties" },
137 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL permissions" },
138 {DMU_BSWAP_ACL, TRUE, FALSE, TRUE, "ZFS ACL" },
139 {DMU_BSWAP_UINT8, TRUE, FALSE, TRUE, "ZFS SYSACL" },
140 {DMU_BSWAP_UINT8, TRUE, FALSE, TRUE, "FUID table" },
141 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "FUID table size" },
142 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL dataset next clones"},
143 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "scan work queue" },
144 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS user/group/project used" },
145 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "ZFS user/group/project quota"},
146 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "snapshot refcount tags"},
147 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "DDT ZAP algorithm" },
148 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "DDT statistics" },
149 {DMU_BSWAP_UINT8, TRUE, FALSE, TRUE, "System attributes" },
150 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "SA master node" },
151 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "SA attr registration" },
152 {DMU_BSWAP_ZAP, TRUE, FALSE, TRUE, "SA attr layouts" },
153 {DMU_BSWAP_ZAP, TRUE, FALSE, FALSE, "scan translations" },
154 {DMU_BSWAP_UINT8, FALSE, FALSE, TRUE, "deduplicated block" },
155 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL deadlist map" },
156 {DMU_BSWAP_UINT64, TRUE, TRUE, FALSE, "DSL deadlist map hdr" },
157 {DMU_BSWAP_ZAP, TRUE, TRUE, FALSE, "DSL dir clones" },
158 {DMU_BSWAP_UINT64, TRUE, FALSE, FALSE, "bpobj subobj" }
161 dmu_object_byteswap_info_t dmu_ot_byteswap[DMU_BSWAP_NUMFUNCS] = {
162 { byteswap_uint8_array, "uint8" },
163 { byteswap_uint16_array, "uint16" },
164 { byteswap_uint32_array, "uint32" },
165 { byteswap_uint64_array, "uint64" },
166 { zap_byteswap, "zap" },
167 { dnode_buf_byteswap, "dnode" },
168 { dmu_objset_byteswap, "objset" },
169 { zfs_znode_byteswap, "znode" },
170 { zfs_oldacl_byteswap, "oldacl" },
171 { zfs_acl_byteswap, "acl" }
175 dmu_buf_hold_noread_by_dnode(dnode_t *dn, uint64_t offset,
176 const void *tag, dmu_buf_t **dbp)
178 uint64_t blkid;
179 dmu_buf_impl_t *db;
181 rw_enter(&dn->dn_struct_rwlock, RW_READER);
182 blkid = dbuf_whichblock(dn, 0, offset);
183 db = dbuf_hold(dn, blkid, tag);
184 rw_exit(&dn->dn_struct_rwlock);
186 if (db == NULL) {
187 *dbp = NULL;
188 return (SET_ERROR(EIO));
191 *dbp = &db->db;
192 return (0);
196 dmu_buf_hold_noread(objset_t *os, uint64_t object, uint64_t offset,
197 const void *tag, dmu_buf_t **dbp)
199 dnode_t *dn;
200 uint64_t blkid;
201 dmu_buf_impl_t *db;
202 int err;
204 err = dnode_hold(os, object, FTAG, &dn);
205 if (err)
206 return (err);
207 rw_enter(&dn->dn_struct_rwlock, RW_READER);
208 blkid = dbuf_whichblock(dn, 0, offset);
209 db = dbuf_hold(dn, blkid, tag);
210 rw_exit(&dn->dn_struct_rwlock);
211 dnode_rele(dn, FTAG);
213 if (db == NULL) {
214 *dbp = NULL;
215 return (SET_ERROR(EIO));
218 *dbp = &db->db;
219 return (err);
223 dmu_buf_hold_by_dnode(dnode_t *dn, uint64_t offset,
224 const void *tag, dmu_buf_t **dbp, int flags)
226 int err;
227 int db_flags = DB_RF_CANFAIL;
229 if (flags & DMU_READ_NO_PREFETCH)
230 db_flags |= DB_RF_NOPREFETCH;
231 if (flags & DMU_READ_NO_DECRYPT)
232 db_flags |= DB_RF_NO_DECRYPT;
234 err = dmu_buf_hold_noread_by_dnode(dn, offset, tag, dbp);
235 if (err == 0) {
236 dmu_buf_impl_t *db = (dmu_buf_impl_t *)(*dbp);
237 err = dbuf_read(db, NULL, db_flags);
238 if (err != 0) {
239 dbuf_rele(db, tag);
240 *dbp = NULL;
244 return (err);
248 dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset,
249 const void *tag, dmu_buf_t **dbp, int flags)
251 int err;
252 int db_flags = DB_RF_CANFAIL;
254 if (flags & DMU_READ_NO_PREFETCH)
255 db_flags |= DB_RF_NOPREFETCH;
256 if (flags & DMU_READ_NO_DECRYPT)
257 db_flags |= DB_RF_NO_DECRYPT;
259 err = dmu_buf_hold_noread(os, object, offset, tag, dbp);
260 if (err == 0) {
261 dmu_buf_impl_t *db = (dmu_buf_impl_t *)(*dbp);
262 err = dbuf_read(db, NULL, db_flags);
263 if (err != 0) {
264 dbuf_rele(db, tag);
265 *dbp = NULL;
269 return (err);
273 dmu_bonus_max(void)
275 return (DN_OLD_MAX_BONUSLEN);
279 dmu_set_bonus(dmu_buf_t *db_fake, int newsize, dmu_tx_t *tx)
281 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
282 dnode_t *dn;
283 int error;
285 if (newsize < 0 || newsize > db_fake->db_size)
286 return (SET_ERROR(EINVAL));
288 DB_DNODE_ENTER(db);
289 dn = DB_DNODE(db);
291 if (dn->dn_bonus != db) {
292 error = SET_ERROR(EINVAL);
293 } else {
294 dnode_setbonuslen(dn, newsize, tx);
295 error = 0;
298 DB_DNODE_EXIT(db);
299 return (error);
303 dmu_set_bonustype(dmu_buf_t *db_fake, dmu_object_type_t type, dmu_tx_t *tx)
305 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
306 dnode_t *dn;
307 int error;
309 if (!DMU_OT_IS_VALID(type))
310 return (SET_ERROR(EINVAL));
312 DB_DNODE_ENTER(db);
313 dn = DB_DNODE(db);
315 if (dn->dn_bonus != db) {
316 error = SET_ERROR(EINVAL);
317 } else {
318 dnode_setbonus_type(dn, type, tx);
319 error = 0;
322 DB_DNODE_EXIT(db);
323 return (error);
326 dmu_object_type_t
327 dmu_get_bonustype(dmu_buf_t *db_fake)
329 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
330 dmu_object_type_t type;
332 DB_DNODE_ENTER(db);
333 type = DB_DNODE(db)->dn_bonustype;
334 DB_DNODE_EXIT(db);
336 return (type);
340 dmu_rm_spill(objset_t *os, uint64_t object, dmu_tx_t *tx)
342 dnode_t *dn;
343 int error;
345 error = dnode_hold(os, object, FTAG, &dn);
346 dbuf_rm_spill(dn, tx);
347 rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
348 dnode_rm_spill(dn, tx);
349 rw_exit(&dn->dn_struct_rwlock);
350 dnode_rele(dn, FTAG);
351 return (error);
355 * Lookup and hold the bonus buffer for the provided dnode. If the dnode
356 * has not yet been allocated a new bonus dbuf a will be allocated.
357 * Returns ENOENT, EIO, or 0.
359 int dmu_bonus_hold_by_dnode(dnode_t *dn, const void *tag, dmu_buf_t **dbp,
360 uint32_t flags)
362 dmu_buf_impl_t *db;
363 int error;
364 uint32_t db_flags = DB_RF_MUST_SUCCEED;
366 if (flags & DMU_READ_NO_PREFETCH)
367 db_flags |= DB_RF_NOPREFETCH;
368 if (flags & DMU_READ_NO_DECRYPT)
369 db_flags |= DB_RF_NO_DECRYPT;
371 rw_enter(&dn->dn_struct_rwlock, RW_READER);
372 if (dn->dn_bonus == NULL) {
373 if (!rw_tryupgrade(&dn->dn_struct_rwlock)) {
374 rw_exit(&dn->dn_struct_rwlock);
375 rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
377 if (dn->dn_bonus == NULL)
378 dbuf_create_bonus(dn);
380 db = dn->dn_bonus;
382 /* as long as the bonus buf is held, the dnode will be held */
383 if (zfs_refcount_add(&db->db_holds, tag) == 1) {
384 VERIFY(dnode_add_ref(dn, db));
385 atomic_inc_32(&dn->dn_dbufs_count);
389 * Wait to drop dn_struct_rwlock until after adding the bonus dbuf's
390 * hold and incrementing the dbuf count to ensure that dnode_move() sees
391 * a dnode hold for every dbuf.
393 rw_exit(&dn->dn_struct_rwlock);
395 error = dbuf_read(db, NULL, db_flags);
396 if (error) {
397 dnode_evict_bonus(dn);
398 dbuf_rele(db, tag);
399 *dbp = NULL;
400 return (error);
403 *dbp = &db->db;
404 return (0);
408 dmu_bonus_hold(objset_t *os, uint64_t object, const void *tag, dmu_buf_t **dbp)
410 dnode_t *dn;
411 int error;
413 error = dnode_hold(os, object, FTAG, &dn);
414 if (error)
415 return (error);
417 error = dmu_bonus_hold_by_dnode(dn, tag, dbp, DMU_READ_NO_PREFETCH);
418 dnode_rele(dn, FTAG);
420 return (error);
424 * returns ENOENT, EIO, or 0.
426 * This interface will allocate a blank spill dbuf when a spill blk
427 * doesn't already exist on the dnode.
429 * if you only want to find an already existing spill db, then
430 * dmu_spill_hold_existing() should be used.
433 dmu_spill_hold_by_dnode(dnode_t *dn, uint32_t flags, const void *tag,
434 dmu_buf_t **dbp)
436 dmu_buf_impl_t *db = NULL;
437 int err;
439 if ((flags & DB_RF_HAVESTRUCT) == 0)
440 rw_enter(&dn->dn_struct_rwlock, RW_READER);
442 db = dbuf_hold(dn, DMU_SPILL_BLKID, tag);
444 if ((flags & DB_RF_HAVESTRUCT) == 0)
445 rw_exit(&dn->dn_struct_rwlock);
447 if (db == NULL) {
448 *dbp = NULL;
449 return (SET_ERROR(EIO));
451 err = dbuf_read(db, NULL, flags);
452 if (err == 0)
453 *dbp = &db->db;
454 else {
455 dbuf_rele(db, tag);
456 *dbp = NULL;
458 return (err);
462 dmu_spill_hold_existing(dmu_buf_t *bonus, const void *tag, dmu_buf_t **dbp)
464 dmu_buf_impl_t *db = (dmu_buf_impl_t *)bonus;
465 dnode_t *dn;
466 int err;
468 DB_DNODE_ENTER(db);
469 dn = DB_DNODE(db);
471 if (spa_version(dn->dn_objset->os_spa) < SPA_VERSION_SA) {
472 err = SET_ERROR(EINVAL);
473 } else {
474 rw_enter(&dn->dn_struct_rwlock, RW_READER);
476 if (!dn->dn_have_spill) {
477 err = SET_ERROR(ENOENT);
478 } else {
479 err = dmu_spill_hold_by_dnode(dn,
480 DB_RF_HAVESTRUCT | DB_RF_CANFAIL, tag, dbp);
483 rw_exit(&dn->dn_struct_rwlock);
486 DB_DNODE_EXIT(db);
487 return (err);
491 dmu_spill_hold_by_bonus(dmu_buf_t *bonus, uint32_t flags, const void *tag,
492 dmu_buf_t **dbp)
494 dmu_buf_impl_t *db = (dmu_buf_impl_t *)bonus;
495 int err;
496 uint32_t db_flags = DB_RF_CANFAIL;
498 if (flags & DMU_READ_NO_DECRYPT)
499 db_flags |= DB_RF_NO_DECRYPT;
501 DB_DNODE_ENTER(db);
502 err = dmu_spill_hold_by_dnode(DB_DNODE(db), db_flags, tag, dbp);
503 DB_DNODE_EXIT(db);
505 return (err);
509 * Note: longer-term, we should modify all of the dmu_buf_*() interfaces
510 * to take a held dnode rather than <os, object> -- the lookup is wasteful,
511 * and can induce severe lock contention when writing to several files
512 * whose dnodes are in the same block.
515 dmu_buf_hold_array_by_dnode(dnode_t *dn, uint64_t offset, uint64_t length,
516 boolean_t read, const void *tag, int *numbufsp, dmu_buf_t ***dbpp,
517 uint32_t flags)
519 dmu_buf_t **dbp;
520 zstream_t *zs = NULL;
521 uint64_t blkid, nblks, i;
522 uint32_t dbuf_flags;
523 int err;
524 zio_t *zio = NULL;
525 boolean_t missed = B_FALSE;
527 ASSERT(!read || length <= DMU_MAX_ACCESS);
530 * Note: We directly notify the prefetch code of this read, so that
531 * we can tell it about the multi-block read. dbuf_read() only knows
532 * about the one block it is accessing.
534 dbuf_flags = DB_RF_CANFAIL | DB_RF_NEVERWAIT | DB_RF_HAVESTRUCT |
535 DB_RF_NOPREFETCH;
537 if ((flags & DMU_READ_NO_DECRYPT) != 0)
538 dbuf_flags |= DB_RF_NO_DECRYPT;
540 rw_enter(&dn->dn_struct_rwlock, RW_READER);
541 if (dn->dn_datablkshift) {
542 int blkshift = dn->dn_datablkshift;
543 nblks = (P2ROUNDUP(offset + length, 1ULL << blkshift) -
544 P2ALIGN_TYPED(offset, 1ULL << blkshift, uint64_t))
545 >> blkshift;
546 } else {
547 if (offset + length > dn->dn_datablksz) {
548 zfs_panic_recover("zfs: accessing past end of object "
549 "%llx/%llx (size=%u access=%llu+%llu)",
550 (longlong_t)dn->dn_objset->
551 os_dsl_dataset->ds_object,
552 (longlong_t)dn->dn_object, dn->dn_datablksz,
553 (longlong_t)offset, (longlong_t)length);
554 rw_exit(&dn->dn_struct_rwlock);
555 return (SET_ERROR(EIO));
557 nblks = 1;
559 dbp = kmem_zalloc(sizeof (dmu_buf_t *) * nblks, KM_SLEEP);
561 if (read)
562 zio = zio_root(dn->dn_objset->os_spa, NULL, NULL,
563 ZIO_FLAG_CANFAIL);
564 blkid = dbuf_whichblock(dn, 0, offset);
565 if ((flags & DMU_READ_NO_PREFETCH) == 0) {
567 * Prepare the zfetch before initiating the demand reads, so
568 * that if multiple threads block on same indirect block, we
569 * base predictions on the original less racy request order.
571 zs = dmu_zfetch_prepare(&dn->dn_zfetch, blkid, nblks, read,
572 B_TRUE);
574 for (i = 0; i < nblks; i++) {
575 dmu_buf_impl_t *db = dbuf_hold(dn, blkid + i, tag);
576 if (db == NULL) {
577 if (zs) {
578 dmu_zfetch_run(&dn->dn_zfetch, zs, missed,
579 B_TRUE);
581 rw_exit(&dn->dn_struct_rwlock);
582 dmu_buf_rele_array(dbp, nblks, tag);
583 if (read)
584 zio_nowait(zio);
585 return (SET_ERROR(EIO));
589 * Initiate async demand data read.
590 * We check the db_state after calling dbuf_read() because
591 * (1) dbuf_read() may change the state to CACHED due to a
592 * hit in the ARC, and (2) on a cache miss, a child will
593 * have been added to "zio" but not yet completed, so the
594 * state will not yet be CACHED.
596 if (read) {
597 if (i == nblks - 1 && blkid + i < dn->dn_maxblkid &&
598 offset + length < db->db.db_offset +
599 db->db.db_size) {
600 if (offset <= db->db.db_offset)
601 dbuf_flags |= DB_RF_PARTIAL_FIRST;
602 else
603 dbuf_flags |= DB_RF_PARTIAL_MORE;
605 (void) dbuf_read(db, zio, dbuf_flags);
606 if (db->db_state != DB_CACHED)
607 missed = B_TRUE;
609 dbp[i] = &db->db;
613 * If we are doing O_DIRECT we still hold the dbufs, even for reads,
614 * but we do not issue any reads here. We do not want to account for
615 * writes in this case.
617 * O_DIRECT write/read accounting takes place in
618 * dmu_{write/read}_abd().
620 if (!read && ((flags & DMU_DIRECTIO) == 0))
621 zfs_racct_write(dn->dn_objset->os_spa, length, nblks, flags);
623 if (zs)
624 dmu_zfetch_run(&dn->dn_zfetch, zs, missed, B_TRUE);
625 rw_exit(&dn->dn_struct_rwlock);
627 if (read) {
628 /* wait for async read i/o */
629 err = zio_wait(zio);
630 if (err) {
631 dmu_buf_rele_array(dbp, nblks, tag);
632 return (err);
635 /* wait for other io to complete */
636 for (i = 0; i < nblks; i++) {
637 dmu_buf_impl_t *db = (dmu_buf_impl_t *)dbp[i];
638 mutex_enter(&db->db_mtx);
639 while (db->db_state == DB_READ ||
640 db->db_state == DB_FILL)
641 cv_wait(&db->db_changed, &db->db_mtx);
642 if (db->db_state == DB_UNCACHED)
643 err = SET_ERROR(EIO);
644 mutex_exit(&db->db_mtx);
645 if (err) {
646 dmu_buf_rele_array(dbp, nblks, tag);
647 return (err);
652 *numbufsp = nblks;
653 *dbpp = dbp;
654 return (0);
658 dmu_buf_hold_array(objset_t *os, uint64_t object, uint64_t offset,
659 uint64_t length, int read, const void *tag, int *numbufsp,
660 dmu_buf_t ***dbpp)
662 dnode_t *dn;
663 int err;
665 err = dnode_hold(os, object, FTAG, &dn);
666 if (err)
667 return (err);
669 err = dmu_buf_hold_array_by_dnode(dn, offset, length, read, tag,
670 numbufsp, dbpp, DMU_READ_PREFETCH);
672 dnode_rele(dn, FTAG);
674 return (err);
678 dmu_buf_hold_array_by_bonus(dmu_buf_t *db_fake, uint64_t offset,
679 uint64_t length, boolean_t read, const void *tag, int *numbufsp,
680 dmu_buf_t ***dbpp)
682 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
683 int err;
685 DB_DNODE_ENTER(db);
686 err = dmu_buf_hold_array_by_dnode(DB_DNODE(db), offset, length, read,
687 tag, numbufsp, dbpp, DMU_READ_PREFETCH);
688 DB_DNODE_EXIT(db);
690 return (err);
693 void
694 dmu_buf_rele_array(dmu_buf_t **dbp_fake, int numbufs, const void *tag)
696 int i;
697 dmu_buf_impl_t **dbp = (dmu_buf_impl_t **)dbp_fake;
699 if (numbufs == 0)
700 return;
702 for (i = 0; i < numbufs; i++) {
703 if (dbp[i])
704 dbuf_rele(dbp[i], tag);
707 kmem_free(dbp, sizeof (dmu_buf_t *) * numbufs);
711 * Issue prefetch I/Os for the given blocks. If level is greater than 0, the
712 * indirect blocks prefetched will be those that point to the blocks containing
713 * the data starting at offset, and continuing to offset + len. If the range
714 * is too long, prefetch the first dmu_prefetch_max bytes as requested, while
715 * for the rest only a higher level, also fitting within dmu_prefetch_max. It
716 * should primarily help random reads, since for long sequential reads there is
717 * a speculative prefetcher.
719 * Note that if the indirect blocks above the blocks being prefetched are not
720 * in cache, they will be asynchronously read in. Dnode read by dnode_hold()
721 * is currently synchronous.
723 void
724 dmu_prefetch(objset_t *os, uint64_t object, int64_t level, uint64_t offset,
725 uint64_t len, zio_priority_t pri)
727 dnode_t *dn;
729 if (dmu_prefetch_max == 0 || len == 0) {
730 dmu_prefetch_dnode(os, object, pri);
731 return;
734 if (dnode_hold(os, object, FTAG, &dn) != 0)
735 return;
737 dmu_prefetch_by_dnode(dn, level, offset, len, pri);
739 dnode_rele(dn, FTAG);
742 void
743 dmu_prefetch_by_dnode(dnode_t *dn, int64_t level, uint64_t offset,
744 uint64_t len, zio_priority_t pri)
746 int64_t level2 = level;
747 uint64_t start, end, start2, end2;
750 * Depending on len we may do two prefetches: blocks [start, end) at
751 * level, and following blocks [start2, end2) at higher level2.
753 rw_enter(&dn->dn_struct_rwlock, RW_READER);
754 if (dn->dn_datablkshift != 0) {
756 * The object has multiple blocks. Calculate the full range
757 * of blocks [start, end2) and then split it into two parts,
758 * so that the first [start, end) fits into dmu_prefetch_max.
760 start = dbuf_whichblock(dn, level, offset);
761 end2 = dbuf_whichblock(dn, level, offset + len - 1) + 1;
762 uint8_t ibs = dn->dn_indblkshift;
763 uint8_t bs = (level == 0) ? dn->dn_datablkshift : ibs;
764 uint_t limit = P2ROUNDUP(dmu_prefetch_max, 1 << bs) >> bs;
765 start2 = end = MIN(end2, start + limit);
768 * Find level2 where [start2, end2) fits into dmu_prefetch_max.
770 uint8_t ibps = ibs - SPA_BLKPTRSHIFT;
771 limit = P2ROUNDUP(dmu_prefetch_max, 1 << ibs) >> ibs;
772 do {
773 level2++;
774 start2 = P2ROUNDUP(start2, 1 << ibps) >> ibps;
775 end2 = P2ROUNDUP(end2, 1 << ibps) >> ibps;
776 } while (end2 - start2 > limit);
777 } else {
778 /* There is only one block. Prefetch it or nothing. */
779 start = start2 = end2 = 0;
780 end = start + (level == 0 && offset < dn->dn_datablksz);
783 for (uint64_t i = start; i < end; i++)
784 dbuf_prefetch(dn, level, i, pri, 0);
785 for (uint64_t i = start2; i < end2; i++)
786 dbuf_prefetch(dn, level2, i, pri, 0);
787 rw_exit(&dn->dn_struct_rwlock);
790 typedef struct {
791 kmutex_t dpa_lock;
792 kcondvar_t dpa_cv;
793 uint64_t dpa_pending_io;
794 } dmu_prefetch_arg_t;
796 static void
797 dmu_prefetch_done(void *arg, uint64_t level, uint64_t blkid, boolean_t issued)
799 (void) level; (void) blkid; (void)issued;
800 dmu_prefetch_arg_t *dpa = arg;
802 ASSERT0(level);
804 mutex_enter(&dpa->dpa_lock);
805 ASSERT3U(dpa->dpa_pending_io, >, 0);
806 if (--dpa->dpa_pending_io == 0)
807 cv_broadcast(&dpa->dpa_cv);
808 mutex_exit(&dpa->dpa_lock);
811 static void
812 dmu_prefetch_wait_by_dnode(dnode_t *dn, uint64_t offset, uint64_t len)
814 dmu_prefetch_arg_t dpa;
816 mutex_init(&dpa.dpa_lock, NULL, MUTEX_DEFAULT, NULL);
817 cv_init(&dpa.dpa_cv, NULL, CV_DEFAULT, NULL);
819 rw_enter(&dn->dn_struct_rwlock, RW_READER);
821 uint64_t start = dbuf_whichblock(dn, 0, offset);
822 uint64_t end = dbuf_whichblock(dn, 0, offset + len - 1) + 1;
823 dpa.dpa_pending_io = end - start;
825 for (uint64_t blk = start; blk < end; blk++) {
826 (void) dbuf_prefetch_impl(dn, 0, blk, ZIO_PRIORITY_ASYNC_READ,
827 0, dmu_prefetch_done, &dpa);
830 rw_exit(&dn->dn_struct_rwlock);
832 /* wait for prefetch L0 reads to finish */
833 mutex_enter(&dpa.dpa_lock);
834 while (dpa.dpa_pending_io > 0) {
835 cv_wait(&dpa.dpa_cv, &dpa.dpa_lock);
838 mutex_exit(&dpa.dpa_lock);
840 mutex_destroy(&dpa.dpa_lock);
841 cv_destroy(&dpa.dpa_cv);
845 * Issue prefetch I/Os for the given L0 block range and wait for the I/O
846 * to complete. This does not enforce dmu_prefetch_max and will prefetch
847 * the entire range. The blocks are read from disk into the ARC but no
848 * decompression occurs (i.e., the dbuf cache is not required).
851 dmu_prefetch_wait(objset_t *os, uint64_t object, uint64_t offset, uint64_t size)
853 dnode_t *dn;
854 int err = 0;
856 err = dnode_hold(os, object, FTAG, &dn);
857 if (err != 0)
858 return (err);
861 * Chunk the requests (16 indirects worth) so that we can be interrupted
863 uint64_t chunksize;
864 if (dn->dn_indblkshift) {
865 uint64_t nbps = bp_span_in_blocks(dn->dn_indblkshift, 1);
866 chunksize = (nbps * 16) << dn->dn_datablkshift;
867 } else {
868 chunksize = dn->dn_datablksz;
871 while (size > 0) {
872 uint64_t mylen = MIN(size, chunksize);
874 dmu_prefetch_wait_by_dnode(dn, offset, mylen);
876 offset += mylen;
877 size -= mylen;
879 if (issig()) {
880 err = SET_ERROR(EINTR);
881 break;
885 dnode_rele(dn, FTAG);
887 return (err);
891 * Issue prefetch I/Os for the given object's dnode.
893 void
894 dmu_prefetch_dnode(objset_t *os, uint64_t object, zio_priority_t pri)
896 if (object == 0 || object >= DN_MAX_OBJECT)
897 return;
899 dnode_t *dn = DMU_META_DNODE(os);
900 rw_enter(&dn->dn_struct_rwlock, RW_READER);
901 uint64_t blkid = dbuf_whichblock(dn, 0, object * sizeof (dnode_phys_t));
902 dbuf_prefetch(dn, 0, blkid, pri, 0);
903 rw_exit(&dn->dn_struct_rwlock);
907 * Get the next "chunk" of file data to free. We traverse the file from
908 * the end so that the file gets shorter over time (if we crash in the
909 * middle, this will leave us in a better state). We find allocated file
910 * data by simply searching the allocated level 1 indirects.
912 * On input, *start should be the first offset that does not need to be
913 * freed (e.g. "offset + length"). On return, *start will be the first
914 * offset that should be freed and l1blks is set to the number of level 1
915 * indirect blocks found within the chunk.
917 static int
918 get_next_chunk(dnode_t *dn, uint64_t *start, uint64_t minimum, uint64_t *l1blks)
920 uint64_t blks;
921 uint64_t maxblks = DMU_MAX_ACCESS >> (dn->dn_indblkshift + 1);
922 /* bytes of data covered by a level-1 indirect block */
923 uint64_t iblkrange = (uint64_t)dn->dn_datablksz *
924 EPB(dn->dn_indblkshift, SPA_BLKPTRSHIFT);
926 ASSERT3U(minimum, <=, *start);
928 /* dn_nlevels == 1 means we don't have any L1 blocks */
929 if (dn->dn_nlevels <= 1) {
930 *l1blks = 0;
931 *start = minimum;
932 return (0);
936 * Check if we can free the entire range assuming that all of the
937 * L1 blocks in this range have data. If we can, we use this
938 * worst case value as an estimate so we can avoid having to look
939 * at the object's actual data.
941 uint64_t total_l1blks =
942 (roundup(*start, iblkrange) - (minimum / iblkrange * iblkrange)) /
943 iblkrange;
944 if (total_l1blks <= maxblks) {
945 *l1blks = total_l1blks;
946 *start = minimum;
947 return (0);
949 ASSERT(ISP2(iblkrange));
951 for (blks = 0; *start > minimum && blks < maxblks; blks++) {
952 int err;
955 * dnode_next_offset(BACKWARDS) will find an allocated L1
956 * indirect block at or before the input offset. We must
957 * decrement *start so that it is at the end of the region
958 * to search.
960 (*start)--;
962 err = dnode_next_offset(dn,
963 DNODE_FIND_BACKWARDS, start, 2, 1, 0);
965 /* if there are no indirect blocks before start, we are done */
966 if (err == ESRCH) {
967 *start = minimum;
968 break;
969 } else if (err != 0) {
970 *l1blks = blks;
971 return (err);
974 /* set start to the beginning of this L1 indirect */
975 *start = P2ALIGN_TYPED(*start, iblkrange, uint64_t);
977 if (*start < minimum)
978 *start = minimum;
979 *l1blks = blks;
981 return (0);
985 * If this objset is of type OST_ZFS return true if vfs's unmounted flag is set,
986 * otherwise return false.
987 * Used below in dmu_free_long_range_impl() to enable abort when unmounting
989 static boolean_t
990 dmu_objset_zfs_unmounting(objset_t *os)
992 #ifdef _KERNEL
993 if (dmu_objset_type(os) == DMU_OST_ZFS)
994 return (zfs_get_vfs_flag_unmounted(os));
995 #else
996 (void) os;
997 #endif
998 return (B_FALSE);
1001 static int
1002 dmu_free_long_range_impl(objset_t *os, dnode_t *dn, uint64_t offset,
1003 uint64_t length)
1005 uint64_t object_size;
1006 int err;
1007 uint64_t dirty_frees_threshold;
1008 dsl_pool_t *dp = dmu_objset_pool(os);
1010 if (dn == NULL)
1011 return (SET_ERROR(EINVAL));
1013 object_size = (dn->dn_maxblkid + 1) * dn->dn_datablksz;
1014 if (offset >= object_size)
1015 return (0);
1017 if (zfs_per_txg_dirty_frees_percent <= 100)
1018 dirty_frees_threshold =
1019 zfs_per_txg_dirty_frees_percent * zfs_dirty_data_max / 100;
1020 else
1021 dirty_frees_threshold = zfs_dirty_data_max / 20;
1023 if (length == DMU_OBJECT_END || offset + length > object_size)
1024 length = object_size - offset;
1026 while (length != 0) {
1027 uint64_t chunk_end, chunk_begin, chunk_len;
1028 uint64_t l1blks;
1029 dmu_tx_t *tx;
1031 if (dmu_objset_zfs_unmounting(dn->dn_objset))
1032 return (SET_ERROR(EINTR));
1034 chunk_end = chunk_begin = offset + length;
1036 /* move chunk_begin backwards to the beginning of this chunk */
1037 err = get_next_chunk(dn, &chunk_begin, offset, &l1blks);
1038 if (err)
1039 return (err);
1040 ASSERT3U(chunk_begin, >=, offset);
1041 ASSERT3U(chunk_begin, <=, chunk_end);
1043 chunk_len = chunk_end - chunk_begin;
1045 tx = dmu_tx_create(os);
1046 dmu_tx_hold_free(tx, dn->dn_object, chunk_begin, chunk_len);
1049 * Mark this transaction as typically resulting in a net
1050 * reduction in space used.
1052 dmu_tx_mark_netfree(tx);
1053 err = dmu_tx_assign(tx, TXG_WAIT);
1054 if (err) {
1055 dmu_tx_abort(tx);
1056 return (err);
1059 uint64_t txg = dmu_tx_get_txg(tx);
1061 mutex_enter(&dp->dp_lock);
1062 uint64_t long_free_dirty =
1063 dp->dp_long_free_dirty_pertxg[txg & TXG_MASK];
1064 mutex_exit(&dp->dp_lock);
1067 * To avoid filling up a TXG with just frees, wait for
1068 * the next TXG to open before freeing more chunks if
1069 * we have reached the threshold of frees.
1071 if (dirty_frees_threshold != 0 &&
1072 long_free_dirty >= dirty_frees_threshold) {
1073 DMU_TX_STAT_BUMP(dmu_tx_dirty_frees_delay);
1074 dmu_tx_commit(tx);
1075 txg_wait_open(dp, 0, B_TRUE);
1076 continue;
1080 * In order to prevent unnecessary write throttling, for each
1081 * TXG, we track the cumulative size of L1 blocks being dirtied
1082 * in dnode_free_range() below. We compare this number to a
1083 * tunable threshold, past which we prevent new L1 dirty freeing
1084 * blocks from being added into the open TXG. See
1085 * dmu_free_long_range_impl() for details. The threshold
1086 * prevents write throttle activation due to dirty freeing L1
1087 * blocks taking up a large percentage of zfs_dirty_data_max.
1089 mutex_enter(&dp->dp_lock);
1090 dp->dp_long_free_dirty_pertxg[txg & TXG_MASK] +=
1091 l1blks << dn->dn_indblkshift;
1092 mutex_exit(&dp->dp_lock);
1093 DTRACE_PROBE3(free__long__range,
1094 uint64_t, long_free_dirty, uint64_t, chunk_len,
1095 uint64_t, txg);
1096 dnode_free_range(dn, chunk_begin, chunk_len, tx);
1098 dmu_tx_commit(tx);
1100 length -= chunk_len;
1102 return (0);
1106 dmu_free_long_range(objset_t *os, uint64_t object,
1107 uint64_t offset, uint64_t length)
1109 dnode_t *dn;
1110 int err;
1112 err = dnode_hold(os, object, FTAG, &dn);
1113 if (err != 0)
1114 return (err);
1115 err = dmu_free_long_range_impl(os, dn, offset, length);
1118 * It is important to zero out the maxblkid when freeing the entire
1119 * file, so that (a) subsequent calls to dmu_free_long_range_impl()
1120 * will take the fast path, and (b) dnode_reallocate() can verify
1121 * that the entire file has been freed.
1123 if (err == 0 && offset == 0 && length == DMU_OBJECT_END)
1124 dn->dn_maxblkid = 0;
1126 dnode_rele(dn, FTAG);
1127 return (err);
1131 dmu_free_long_object(objset_t *os, uint64_t object)
1133 dmu_tx_t *tx;
1134 int err;
1136 err = dmu_free_long_range(os, object, 0, DMU_OBJECT_END);
1137 if (err != 0)
1138 return (err);
1140 tx = dmu_tx_create(os);
1141 dmu_tx_hold_bonus(tx, object);
1142 dmu_tx_hold_free(tx, object, 0, DMU_OBJECT_END);
1143 dmu_tx_mark_netfree(tx);
1144 err = dmu_tx_assign(tx, TXG_WAIT);
1145 if (err == 0) {
1146 err = dmu_object_free(os, object, tx);
1147 dmu_tx_commit(tx);
1148 } else {
1149 dmu_tx_abort(tx);
1152 return (err);
1156 dmu_free_range(objset_t *os, uint64_t object, uint64_t offset,
1157 uint64_t size, dmu_tx_t *tx)
1159 dnode_t *dn;
1160 int err = dnode_hold(os, object, FTAG, &dn);
1161 if (err)
1162 return (err);
1163 ASSERT(offset < UINT64_MAX);
1164 ASSERT(size == DMU_OBJECT_END || size <= UINT64_MAX - offset);
1165 dnode_free_range(dn, offset, size, tx);
1166 dnode_rele(dn, FTAG);
1167 return (0);
1170 static int
1171 dmu_read_impl(dnode_t *dn, uint64_t offset, uint64_t size,
1172 void *buf, uint32_t flags)
1174 dmu_buf_t **dbp;
1175 int numbufs, err = 0;
1178 * Deal with odd block sizes, where there can't be data past the first
1179 * block. If we ever do the tail block optimization, we will need to
1180 * handle that here as well.
1182 if (dn->dn_maxblkid == 0) {
1183 uint64_t newsz = offset > dn->dn_datablksz ? 0 :
1184 MIN(size, dn->dn_datablksz - offset);
1185 memset((char *)buf + newsz, 0, size - newsz);
1186 size = newsz;
1189 if (size == 0)
1190 return (0);
1192 /* Allow Direct I/O when requested and properly aligned */
1193 if ((flags & DMU_DIRECTIO) && zfs_dio_page_aligned(buf) &&
1194 zfs_dio_aligned(offset, size, PAGESIZE)) {
1195 abd_t *data = abd_get_from_buf(buf, size);
1196 err = dmu_read_abd(dn, offset, size, data, flags);
1197 abd_free(data);
1198 return (err);
1201 while (size > 0) {
1202 uint64_t mylen = MIN(size, DMU_MAX_ACCESS / 2);
1203 int i;
1206 * NB: we could do this block-at-a-time, but it's nice
1207 * to be reading in parallel.
1209 err = dmu_buf_hold_array_by_dnode(dn, offset, mylen,
1210 TRUE, FTAG, &numbufs, &dbp, flags);
1211 if (err)
1212 break;
1214 for (i = 0; i < numbufs; i++) {
1215 uint64_t tocpy;
1216 int64_t bufoff;
1217 dmu_buf_t *db = dbp[i];
1219 ASSERT(size > 0);
1221 bufoff = offset - db->db_offset;
1222 tocpy = MIN(db->db_size - bufoff, size);
1224 ASSERT(db->db_data != NULL);
1225 (void) memcpy(buf, (char *)db->db_data + bufoff, tocpy);
1227 offset += tocpy;
1228 size -= tocpy;
1229 buf = (char *)buf + tocpy;
1231 dmu_buf_rele_array(dbp, numbufs, FTAG);
1233 return (err);
1237 dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
1238 void *buf, uint32_t flags)
1240 dnode_t *dn;
1241 int err;
1243 err = dnode_hold(os, object, FTAG, &dn);
1244 if (err != 0)
1245 return (err);
1247 err = dmu_read_impl(dn, offset, size, buf, flags);
1248 dnode_rele(dn, FTAG);
1249 return (err);
1253 dmu_read_by_dnode(dnode_t *dn, uint64_t offset, uint64_t size, void *buf,
1254 uint32_t flags)
1256 return (dmu_read_impl(dn, offset, size, buf, flags));
1259 static void
1260 dmu_write_impl(dmu_buf_t **dbp, int numbufs, uint64_t offset, uint64_t size,
1261 const void *buf, dmu_tx_t *tx)
1263 int i;
1265 for (i = 0; i < numbufs; i++) {
1266 uint64_t tocpy;
1267 int64_t bufoff;
1268 dmu_buf_t *db = dbp[i];
1270 ASSERT(size > 0);
1272 bufoff = offset - db->db_offset;
1273 tocpy = MIN(db->db_size - bufoff, size);
1275 ASSERT(i == 0 || i == numbufs-1 || tocpy == db->db_size);
1277 if (tocpy == db->db_size)
1278 dmu_buf_will_fill(db, tx, B_FALSE);
1279 else
1280 dmu_buf_will_dirty(db, tx);
1282 ASSERT(db->db_data != NULL);
1283 (void) memcpy((char *)db->db_data + bufoff, buf, tocpy);
1285 if (tocpy == db->db_size)
1286 dmu_buf_fill_done(db, tx, B_FALSE);
1288 offset += tocpy;
1289 size -= tocpy;
1290 buf = (char *)buf + tocpy;
1294 void
1295 dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
1296 const void *buf, dmu_tx_t *tx)
1298 dmu_buf_t **dbp;
1299 int numbufs;
1301 if (size == 0)
1302 return;
1304 VERIFY0(dmu_buf_hold_array(os, object, offset, size,
1305 FALSE, FTAG, &numbufs, &dbp));
1306 dmu_write_impl(dbp, numbufs, offset, size, buf, tx);
1307 dmu_buf_rele_array(dbp, numbufs, FTAG);
1311 * This interface is not used internally by ZFS but is provided for
1312 * use by Lustre which is built on the DMU interfaces.
1315 dmu_write_by_dnode_flags(dnode_t *dn, uint64_t offset, uint64_t size,
1316 const void *buf, dmu_tx_t *tx, uint32_t flags)
1318 dmu_buf_t **dbp;
1319 int numbufs;
1320 int error;
1322 if (size == 0)
1323 return (0);
1325 /* Allow Direct I/O when requested and properly aligned */
1326 if ((flags & DMU_DIRECTIO) && zfs_dio_page_aligned((void *)buf) &&
1327 zfs_dio_aligned(offset, size, dn->dn_datablksz)) {
1328 abd_t *data = abd_get_from_buf((void *)buf, size);
1329 error = dmu_write_abd(dn, offset, size, data, DMU_DIRECTIO, tx);
1330 abd_free(data);
1331 return (error);
1334 VERIFY0(dmu_buf_hold_array_by_dnode(dn, offset, size,
1335 FALSE, FTAG, &numbufs, &dbp, DMU_READ_PREFETCH));
1336 dmu_write_impl(dbp, numbufs, offset, size, buf, tx);
1337 dmu_buf_rele_array(dbp, numbufs, FTAG);
1338 return (0);
1342 dmu_write_by_dnode(dnode_t *dn, uint64_t offset, uint64_t size,
1343 const void *buf, dmu_tx_t *tx)
1345 return (dmu_write_by_dnode_flags(dn, offset, size, buf, tx, 0));
1348 void
1349 dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
1350 dmu_tx_t *tx)
1352 dmu_buf_t **dbp;
1353 int numbufs, i;
1355 if (size == 0)
1356 return;
1358 VERIFY(0 == dmu_buf_hold_array(os, object, offset, size,
1359 FALSE, FTAG, &numbufs, &dbp));
1361 for (i = 0; i < numbufs; i++) {
1362 dmu_buf_t *db = dbp[i];
1364 dmu_buf_will_not_fill(db, tx);
1366 dmu_buf_rele_array(dbp, numbufs, FTAG);
1369 void
1370 dmu_write_embedded(objset_t *os, uint64_t object, uint64_t offset,
1371 void *data, uint8_t etype, uint8_t comp, int uncompressed_size,
1372 int compressed_size, int byteorder, dmu_tx_t *tx)
1374 dmu_buf_t *db;
1376 ASSERT3U(etype, <, NUM_BP_EMBEDDED_TYPES);
1377 ASSERT3U(comp, <, ZIO_COMPRESS_FUNCTIONS);
1378 VERIFY0(dmu_buf_hold_noread(os, object, offset,
1379 FTAG, &db));
1381 dmu_buf_write_embedded(db,
1382 data, (bp_embedded_type_t)etype, (enum zio_compress)comp,
1383 uncompressed_size, compressed_size, byteorder, tx);
1385 dmu_buf_rele(db, FTAG);
1388 void
1389 dmu_redact(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
1390 dmu_tx_t *tx)
1392 int numbufs, i;
1393 dmu_buf_t **dbp;
1395 VERIFY0(dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG,
1396 &numbufs, &dbp));
1397 for (i = 0; i < numbufs; i++)
1398 dmu_buf_redact(dbp[i], tx);
1399 dmu_buf_rele_array(dbp, numbufs, FTAG);
1402 #ifdef _KERNEL
1404 dmu_read_uio_dnode(dnode_t *dn, zfs_uio_t *uio, uint64_t size)
1406 dmu_buf_t **dbp;
1407 int numbufs, i, err;
1409 if (uio->uio_extflg & UIO_DIRECT)
1410 return (dmu_read_uio_direct(dn, uio, size));
1413 * NB: we could do this block-at-a-time, but it's nice
1414 * to be reading in parallel.
1416 err = dmu_buf_hold_array_by_dnode(dn, zfs_uio_offset(uio), size,
1417 TRUE, FTAG, &numbufs, &dbp, 0);
1418 if (err)
1419 return (err);
1421 for (i = 0; i < numbufs; i++) {
1422 uint64_t tocpy;
1423 int64_t bufoff;
1424 dmu_buf_t *db = dbp[i];
1426 ASSERT(size > 0);
1428 bufoff = zfs_uio_offset(uio) - db->db_offset;
1429 tocpy = MIN(db->db_size - bufoff, size);
1431 ASSERT(db->db_data != NULL);
1432 err = zfs_uio_fault_move((char *)db->db_data + bufoff, tocpy,
1433 UIO_READ, uio);
1435 if (err)
1436 break;
1438 size -= tocpy;
1440 dmu_buf_rele_array(dbp, numbufs, FTAG);
1442 return (err);
1446 * Read 'size' bytes into the uio buffer.
1447 * From object zdb->db_object.
1448 * Starting at zfs_uio_offset(uio).
1450 * If the caller already has a dbuf in the target object
1451 * (e.g. its bonus buffer), this routine is faster than dmu_read_uio(),
1452 * because we don't have to find the dnode_t for the object.
1455 dmu_read_uio_dbuf(dmu_buf_t *zdb, zfs_uio_t *uio, uint64_t size)
1457 dmu_buf_impl_t *db = (dmu_buf_impl_t *)zdb;
1458 int err;
1460 if (size == 0)
1461 return (0);
1463 DB_DNODE_ENTER(db);
1464 err = dmu_read_uio_dnode(DB_DNODE(db), uio, size);
1465 DB_DNODE_EXIT(db);
1467 return (err);
1471 * Read 'size' bytes into the uio buffer.
1472 * From the specified object
1473 * Starting at offset zfs_uio_offset(uio).
1476 dmu_read_uio(objset_t *os, uint64_t object, zfs_uio_t *uio, uint64_t size)
1478 dnode_t *dn;
1479 int err;
1481 if (size == 0)
1482 return (0);
1484 err = dnode_hold(os, object, FTAG, &dn);
1485 if (err)
1486 return (err);
1488 err = dmu_read_uio_dnode(dn, uio, size);
1490 dnode_rele(dn, FTAG);
1492 return (err);
1496 dmu_write_uio_dnode(dnode_t *dn, zfs_uio_t *uio, uint64_t size, dmu_tx_t *tx)
1498 dmu_buf_t **dbp;
1499 int numbufs;
1500 int err = 0;
1501 uint64_t write_size;
1503 top:
1504 write_size = size;
1507 * We only allow Direct I/O writes to happen if we are block
1508 * sized aligned. Otherwise, we pass the write off to the ARC.
1510 if ((uio->uio_extflg & UIO_DIRECT) &&
1511 (write_size >= dn->dn_datablksz)) {
1512 if (zfs_dio_aligned(zfs_uio_offset(uio), write_size,
1513 dn->dn_datablksz)) {
1514 return (dmu_write_uio_direct(dn, uio, size, tx));
1515 } else if (write_size > dn->dn_datablksz &&
1516 zfs_dio_offset_aligned(zfs_uio_offset(uio),
1517 dn->dn_datablksz)) {
1518 write_size =
1519 dn->dn_datablksz * (write_size / dn->dn_datablksz);
1520 err = dmu_write_uio_direct(dn, uio, write_size, tx);
1521 if (err == 0) {
1522 size -= write_size;
1523 goto top;
1524 } else {
1525 return (err);
1527 } else {
1528 write_size =
1529 P2PHASE(zfs_uio_offset(uio), dn->dn_datablksz);
1533 err = dmu_buf_hold_array_by_dnode(dn, zfs_uio_offset(uio), write_size,
1534 FALSE, FTAG, &numbufs, &dbp, DMU_READ_PREFETCH);
1535 if (err)
1536 return (err);
1538 for (int i = 0; i < numbufs; i++) {
1539 uint64_t tocpy;
1540 int64_t bufoff;
1541 dmu_buf_t *db = dbp[i];
1543 ASSERT(write_size > 0);
1545 offset_t off = zfs_uio_offset(uio);
1546 bufoff = off - db->db_offset;
1547 tocpy = MIN(db->db_size - bufoff, write_size);
1549 ASSERT(i == 0 || i == numbufs-1 || tocpy == db->db_size);
1551 if (tocpy == db->db_size)
1552 dmu_buf_will_fill(db, tx, B_TRUE);
1553 else
1554 dmu_buf_will_dirty(db, tx);
1556 ASSERT(db->db_data != NULL);
1557 err = zfs_uio_fault_move((char *)db->db_data + bufoff,
1558 tocpy, UIO_WRITE, uio);
1560 if (tocpy == db->db_size && dmu_buf_fill_done(db, tx, err)) {
1561 /* The fill was reverted. Undo any uio progress. */
1562 zfs_uio_advance(uio, off - zfs_uio_offset(uio));
1565 if (err)
1566 break;
1568 write_size -= tocpy;
1569 size -= tocpy;
1572 IMPLY(err == 0, write_size == 0);
1574 dmu_buf_rele_array(dbp, numbufs, FTAG);
1576 if ((uio->uio_extflg & UIO_DIRECT) && size > 0) {
1577 goto top;
1580 return (err);
1584 * Write 'size' bytes from the uio buffer.
1585 * To object zdb->db_object.
1586 * Starting at offset zfs_uio_offset(uio).
1588 * If the caller already has a dbuf in the target object
1589 * (e.g. its bonus buffer), this routine is faster than dmu_write_uio(),
1590 * because we don't have to find the dnode_t for the object.
1593 dmu_write_uio_dbuf(dmu_buf_t *zdb, zfs_uio_t *uio, uint64_t size,
1594 dmu_tx_t *tx)
1596 dmu_buf_impl_t *db = (dmu_buf_impl_t *)zdb;
1597 int err;
1599 if (size == 0)
1600 return (0);
1602 DB_DNODE_ENTER(db);
1603 err = dmu_write_uio_dnode(DB_DNODE(db), uio, size, tx);
1604 DB_DNODE_EXIT(db);
1606 return (err);
1610 * Write 'size' bytes from the uio buffer.
1611 * To the specified object.
1612 * Starting at offset zfs_uio_offset(uio).
1615 dmu_write_uio(objset_t *os, uint64_t object, zfs_uio_t *uio, uint64_t size,
1616 dmu_tx_t *tx)
1618 dnode_t *dn;
1619 int err;
1621 if (size == 0)
1622 return (0);
1624 err = dnode_hold(os, object, FTAG, &dn);
1625 if (err)
1626 return (err);
1628 err = dmu_write_uio_dnode(dn, uio, size, tx);
1630 dnode_rele(dn, FTAG);
1632 return (err);
1634 #endif /* _KERNEL */
1636 static void
1637 dmu_cached_bps(spa_t *spa, blkptr_t *bps, uint_t nbps,
1638 uint64_t *l1sz, uint64_t *l2sz)
1640 int cached_flags;
1642 if (bps == NULL)
1643 return;
1645 for (size_t blk_off = 0; blk_off < nbps; blk_off++) {
1646 blkptr_t *bp = &bps[blk_off];
1648 if (BP_IS_HOLE(bp))
1649 continue;
1651 cached_flags = arc_cached(spa, bp);
1652 if (cached_flags == 0)
1653 continue;
1655 if ((cached_flags & (ARC_CACHED_IN_L1 | ARC_CACHED_IN_L2)) ==
1656 ARC_CACHED_IN_L2)
1657 *l2sz += BP_GET_LSIZE(bp);
1658 else
1659 *l1sz += BP_GET_LSIZE(bp);
1664 * Estimate DMU object cached size.
1667 dmu_object_cached_size(objset_t *os, uint64_t object,
1668 uint64_t *l1sz, uint64_t *l2sz)
1670 dnode_t *dn;
1671 dmu_object_info_t doi;
1672 int err = 0;
1674 *l1sz = *l2sz = 0;
1676 if (dnode_hold(os, object, FTAG, &dn) != 0)
1677 return (0);
1679 if (dn->dn_nlevels < 2) {
1680 dnode_rele(dn, FTAG);
1681 return (0);
1684 dmu_object_info_from_dnode(dn, &doi);
1686 for (uint64_t off = 0; off < doi.doi_max_offset;
1687 off += dmu_prefetch_max) {
1688 /* dbuf_read doesn't prefetch L1 blocks. */
1689 dmu_prefetch_by_dnode(dn, 1, off,
1690 dmu_prefetch_max, ZIO_PRIORITY_SYNC_READ);
1694 * Hold all valid L1 blocks, asking ARC the status of each BP
1695 * contained in each such L1 block.
1697 uint_t nbps = bp_span_in_blocks(dn->dn_indblkshift, 1);
1698 uint64_t l1blks = 1 + (dn->dn_maxblkid / nbps);
1700 rw_enter(&dn->dn_struct_rwlock, RW_READER);
1701 for (uint64_t blk = 0; blk < l1blks; blk++) {
1702 dmu_buf_impl_t *db = NULL;
1704 if (issig()) {
1706 * On interrupt, get out, and bubble up EINTR
1708 err = EINTR;
1709 break;
1713 * If we get an i/o error here, the L1 can't be read,
1714 * and nothing under it could be cached, so we just
1715 * continue. Ignoring the error from dbuf_hold_impl
1716 * or from dbuf_read is then a reasonable choice.
1718 err = dbuf_hold_impl(dn, 1, blk, B_TRUE, B_FALSE, FTAG, &db);
1719 if (err != 0) {
1721 * ignore error and continue
1723 err = 0;
1724 continue;
1727 err = dbuf_read(db, NULL, DB_RF_CANFAIL);
1728 if (err == 0) {
1729 dmu_cached_bps(dmu_objset_spa(os), db->db.db_data,
1730 nbps, l1sz, l2sz);
1733 * error may be ignored, and we continue
1735 err = 0;
1736 dbuf_rele(db, FTAG);
1738 rw_exit(&dn->dn_struct_rwlock);
1740 dnode_rele(dn, FTAG);
1741 return (err);
1745 * Allocate a loaned anonymous arc buffer.
1747 arc_buf_t *
1748 dmu_request_arcbuf(dmu_buf_t *handle, int size)
1750 dmu_buf_impl_t *db = (dmu_buf_impl_t *)handle;
1752 return (arc_loan_buf(db->db_objset->os_spa, B_FALSE, size));
1756 * Free a loaned arc buffer.
1758 void
1759 dmu_return_arcbuf(arc_buf_t *buf)
1761 arc_return_buf(buf, FTAG);
1762 arc_buf_destroy(buf, FTAG);
1766 * A "lightweight" write is faster than a regular write (e.g.
1767 * dmu_write_by_dnode() or dmu_assign_arcbuf_by_dnode()), because it avoids the
1768 * CPU cost of creating a dmu_buf_impl_t and arc_buf_[hdr_]_t. However, the
1769 * data can not be read or overwritten until the transaction's txg has been
1770 * synced. This makes it appropriate for workloads that are known to be
1771 * (temporarily) write-only, like "zfs receive".
1773 * A single block is written, starting at the specified offset in bytes. If
1774 * the call is successful, it returns 0 and the provided abd has been
1775 * consumed (the caller should not free it).
1778 dmu_lightweight_write_by_dnode(dnode_t *dn, uint64_t offset, abd_t *abd,
1779 const zio_prop_t *zp, zio_flag_t flags, dmu_tx_t *tx)
1781 dbuf_dirty_record_t *dr =
1782 dbuf_dirty_lightweight(dn, dbuf_whichblock(dn, 0, offset), tx);
1783 if (dr == NULL)
1784 return (SET_ERROR(EIO));
1785 dr->dt.dll.dr_abd = abd;
1786 dr->dt.dll.dr_props = *zp;
1787 dr->dt.dll.dr_flags = flags;
1788 return (0);
1792 * When possible directly assign passed loaned arc buffer to a dbuf.
1793 * If this is not possible copy the contents of passed arc buf via
1794 * dmu_write().
1797 dmu_assign_arcbuf_by_dnode(dnode_t *dn, uint64_t offset, arc_buf_t *buf,
1798 dmu_tx_t *tx)
1800 dmu_buf_impl_t *db;
1801 objset_t *os = dn->dn_objset;
1802 uint64_t object = dn->dn_object;
1803 uint32_t blksz = (uint32_t)arc_buf_lsize(buf);
1804 uint64_t blkid;
1806 rw_enter(&dn->dn_struct_rwlock, RW_READER);
1807 blkid = dbuf_whichblock(dn, 0, offset);
1808 db = dbuf_hold(dn, blkid, FTAG);
1809 rw_exit(&dn->dn_struct_rwlock);
1810 if (db == NULL)
1811 return (SET_ERROR(EIO));
1814 * We can only assign if the offset is aligned and the arc buf is the
1815 * same size as the dbuf.
1817 if (offset == db->db.db_offset && blksz == db->db.db_size) {
1818 zfs_racct_write(os->os_spa, blksz, 1, 0);
1819 dbuf_assign_arcbuf(db, buf, tx);
1820 dbuf_rele(db, FTAG);
1821 } else {
1822 /* compressed bufs must always be assignable to their dbuf */
1823 ASSERT3U(arc_get_compression(buf), ==, ZIO_COMPRESS_OFF);
1824 ASSERT(!(buf->b_flags & ARC_BUF_FLAG_COMPRESSED));
1826 dbuf_rele(db, FTAG);
1827 dmu_write(os, object, offset, blksz, buf->b_data, tx);
1828 dmu_return_arcbuf(buf);
1831 return (0);
1835 dmu_assign_arcbuf_by_dbuf(dmu_buf_t *handle, uint64_t offset, arc_buf_t *buf,
1836 dmu_tx_t *tx)
1838 int err;
1839 dmu_buf_impl_t *db = (dmu_buf_impl_t *)handle;
1841 DB_DNODE_ENTER(db);
1842 err = dmu_assign_arcbuf_by_dnode(DB_DNODE(db), offset, buf, tx);
1843 DB_DNODE_EXIT(db);
1845 return (err);
1848 void
1849 dmu_sync_ready(zio_t *zio, arc_buf_t *buf, void *varg)
1851 (void) buf;
1852 dmu_sync_arg_t *dsa = varg;
1854 if (zio->io_error == 0) {
1855 dbuf_dirty_record_t *dr = dsa->dsa_dr;
1856 blkptr_t *bp = zio->io_bp;
1858 if (BP_IS_HOLE(bp)) {
1859 dmu_buf_t *db = NULL;
1860 if (dr)
1861 db = &(dr->dr_dbuf->db);
1862 else
1863 db = dsa->dsa_zgd->zgd_db;
1865 * A block of zeros may compress to a hole, but the
1866 * block size still needs to be known for replay.
1868 BP_SET_LSIZE(bp, db->db_size);
1869 } else if (!BP_IS_EMBEDDED(bp)) {
1870 ASSERT(BP_GET_LEVEL(bp) == 0);
1871 BP_SET_FILL(bp, 1);
1876 static void
1877 dmu_sync_late_arrival_ready(zio_t *zio)
1879 dmu_sync_ready(zio, NULL, zio->io_private);
1882 void
1883 dmu_sync_done(zio_t *zio, arc_buf_t *buf, void *varg)
1885 (void) buf;
1886 dmu_sync_arg_t *dsa = varg;
1887 dbuf_dirty_record_t *dr = dsa->dsa_dr;
1888 dmu_buf_impl_t *db = dr->dr_dbuf;
1889 zgd_t *zgd = dsa->dsa_zgd;
1892 * Record the vdev(s) backing this blkptr so they can be flushed after
1893 * the writes for the lwb have completed.
1895 if (zgd && zio->io_error == 0) {
1896 zil_lwb_add_block(zgd->zgd_lwb, zgd->zgd_bp);
1899 mutex_enter(&db->db_mtx);
1900 ASSERT(dr->dt.dl.dr_override_state == DR_IN_DMU_SYNC);
1901 if (zio->io_error == 0) {
1902 ASSERT0(dr->dt.dl.dr_has_raw_params);
1903 dr->dt.dl.dr_nopwrite = !!(zio->io_flags & ZIO_FLAG_NOPWRITE);
1904 if (dr->dt.dl.dr_nopwrite) {
1905 blkptr_t *bp = zio->io_bp;
1906 blkptr_t *bp_orig = &zio->io_bp_orig;
1907 uint8_t chksum = BP_GET_CHECKSUM(bp_orig);
1909 ASSERT(BP_EQUAL(bp, bp_orig));
1910 VERIFY(BP_EQUAL(bp, db->db_blkptr));
1911 ASSERT(zio->io_prop.zp_compress != ZIO_COMPRESS_OFF);
1912 VERIFY(zio_checksum_table[chksum].ci_flags &
1913 ZCHECKSUM_FLAG_NOPWRITE);
1915 dr->dt.dl.dr_overridden_by = *zio->io_bp;
1916 dr->dt.dl.dr_override_state = DR_OVERRIDDEN;
1917 dr->dt.dl.dr_copies = zio->io_prop.zp_copies;
1920 * Old style holes are filled with all zeros, whereas
1921 * new-style holes maintain their lsize, type, level,
1922 * and birth time (see zio_write_compress). While we
1923 * need to reset the BP_SET_LSIZE() call that happened
1924 * in dmu_sync_ready for old style holes, we do *not*
1925 * want to wipe out the information contained in new
1926 * style holes. Thus, only zero out the block pointer if
1927 * it's an old style hole.
1929 if (BP_IS_HOLE(&dr->dt.dl.dr_overridden_by) &&
1930 BP_GET_LOGICAL_BIRTH(&dr->dt.dl.dr_overridden_by) == 0)
1931 BP_ZERO(&dr->dt.dl.dr_overridden_by);
1932 } else {
1933 dr->dt.dl.dr_override_state = DR_NOT_OVERRIDDEN;
1936 cv_broadcast(&db->db_changed);
1937 mutex_exit(&db->db_mtx);
1939 if (dsa->dsa_done)
1940 dsa->dsa_done(dsa->dsa_zgd, zio->io_error);
1942 kmem_free(dsa, sizeof (*dsa));
1945 static void
1946 dmu_sync_late_arrival_done(zio_t *zio)
1948 blkptr_t *bp = zio->io_bp;
1949 dmu_sync_arg_t *dsa = zio->io_private;
1950 zgd_t *zgd = dsa->dsa_zgd;
1952 if (zio->io_error == 0) {
1954 * Record the vdev(s) backing this blkptr so they can be
1955 * flushed after the writes for the lwb have completed.
1957 zil_lwb_add_block(zgd->zgd_lwb, zgd->zgd_bp);
1959 if (!BP_IS_HOLE(bp)) {
1960 blkptr_t *bp_orig __maybe_unused = &zio->io_bp_orig;
1961 ASSERT(!(zio->io_flags & ZIO_FLAG_NOPWRITE));
1962 ASSERT(BP_IS_HOLE(bp_orig) || !BP_EQUAL(bp, bp_orig));
1963 ASSERT(BP_GET_LOGICAL_BIRTH(zio->io_bp) == zio->io_txg);
1964 ASSERT(zio->io_txg > spa_syncing_txg(zio->io_spa));
1965 zio_free(zio->io_spa, zio->io_txg, zio->io_bp);
1969 dmu_tx_commit(dsa->dsa_tx);
1971 dsa->dsa_done(dsa->dsa_zgd, zio->io_error);
1973 abd_free(zio->io_abd);
1974 kmem_free(dsa, sizeof (*dsa));
1977 static int
1978 dmu_sync_late_arrival(zio_t *pio, objset_t *os, dmu_sync_cb_t *done, zgd_t *zgd,
1979 zio_prop_t *zp, zbookmark_phys_t *zb)
1981 dmu_sync_arg_t *dsa;
1982 dmu_tx_t *tx;
1983 int error;
1985 error = dbuf_read((dmu_buf_impl_t *)zgd->zgd_db, NULL,
1986 DB_RF_CANFAIL | DB_RF_NOPREFETCH);
1987 if (error != 0)
1988 return (error);
1990 tx = dmu_tx_create(os);
1991 dmu_tx_hold_space(tx, zgd->zgd_db->db_size);
1993 * This transaction does not produce any dirty data or log blocks, so
1994 * it should not be throttled. All other cases wait for TXG sync, by
1995 * which time the log block we are writing will be obsolete, so we can
1996 * skip waiting and just return error here instead.
1998 if (dmu_tx_assign(tx, TXG_NOWAIT | TXG_NOTHROTTLE) != 0) {
1999 dmu_tx_abort(tx);
2000 /* Make zl_get_data do txg_waited_synced() */
2001 return (SET_ERROR(EIO));
2005 * In order to prevent the zgd's lwb from being free'd prior to
2006 * dmu_sync_late_arrival_done() being called, we have to ensure
2007 * the lwb's "max txg" takes this tx's txg into account.
2009 zil_lwb_add_txg(zgd->zgd_lwb, dmu_tx_get_txg(tx));
2011 dsa = kmem_alloc(sizeof (dmu_sync_arg_t), KM_SLEEP);
2012 dsa->dsa_dr = NULL;
2013 dsa->dsa_done = done;
2014 dsa->dsa_zgd = zgd;
2015 dsa->dsa_tx = tx;
2018 * Since we are currently syncing this txg, it's nontrivial to
2019 * determine what BP to nopwrite against, so we disable nopwrite.
2021 * When syncing, the db_blkptr is initially the BP of the previous
2022 * txg. We can not nopwrite against it because it will be changed
2023 * (this is similar to the non-late-arrival case where the dbuf is
2024 * dirty in a future txg).
2026 * Then dbuf_write_ready() sets bp_blkptr to the location we will write.
2027 * We can not nopwrite against it because although the BP will not
2028 * (typically) be changed, the data has not yet been persisted to this
2029 * location.
2031 * Finally, when dbuf_write_done() is called, it is theoretically
2032 * possible to always nopwrite, because the data that was written in
2033 * this txg is the same data that we are trying to write. However we
2034 * would need to check that this dbuf is not dirty in any future
2035 * txg's (as we do in the normal dmu_sync() path). For simplicity, we
2036 * don't nopwrite in this case.
2038 zp->zp_nopwrite = B_FALSE;
2040 zio_nowait(zio_write(pio, os->os_spa, dmu_tx_get_txg(tx), zgd->zgd_bp,
2041 abd_get_from_buf(zgd->zgd_db->db_data, zgd->zgd_db->db_size),
2042 zgd->zgd_db->db_size, zgd->zgd_db->db_size, zp,
2043 dmu_sync_late_arrival_ready, NULL, dmu_sync_late_arrival_done,
2044 dsa, ZIO_PRIORITY_SYNC_WRITE, ZIO_FLAG_CANFAIL, zb));
2046 return (0);
2050 * Intent log support: sync the block associated with db to disk.
2051 * N.B. and XXX: the caller is responsible for making sure that the
2052 * data isn't changing while dmu_sync() is writing it.
2054 * Return values:
2056 * EEXIST: this txg has already been synced, so there's nothing to do.
2057 * The caller should not log the write.
2059 * ENOENT: the block was dbuf_free_range()'d, so there's nothing to do.
2060 * The caller should not log the write.
2062 * EALREADY: this block is already in the process of being synced.
2063 * The caller should track its progress (somehow).
2065 * EIO: could not do the I/O.
2066 * The caller should do a txg_wait_synced().
2068 * 0: the I/O has been initiated.
2069 * The caller should log this blkptr in the done callback.
2070 * It is possible that the I/O will fail, in which case
2071 * the error will be reported to the done callback and
2072 * propagated to pio from zio_done().
2075 dmu_sync(zio_t *pio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd)
2077 dmu_buf_impl_t *db = (dmu_buf_impl_t *)zgd->zgd_db;
2078 objset_t *os = db->db_objset;
2079 dsl_dataset_t *ds = os->os_dsl_dataset;
2080 dbuf_dirty_record_t *dr, *dr_next;
2081 dmu_sync_arg_t *dsa;
2082 zbookmark_phys_t zb;
2083 zio_prop_t zp;
2085 ASSERT(pio != NULL);
2086 ASSERT(txg != 0);
2088 SET_BOOKMARK(&zb, ds->ds_object,
2089 db->db.db_object, db->db_level, db->db_blkid);
2091 DB_DNODE_ENTER(db);
2092 dmu_write_policy(os, DB_DNODE(db), db->db_level, WP_DMU_SYNC, &zp);
2093 DB_DNODE_EXIT(db);
2096 * If we're frozen (running ziltest), we always need to generate a bp.
2098 if (txg > spa_freeze_txg(os->os_spa))
2099 return (dmu_sync_late_arrival(pio, os, done, zgd, &zp, &zb));
2102 * Grabbing db_mtx now provides a barrier between dbuf_sync_leaf()
2103 * and us. If we determine that this txg is not yet syncing,
2104 * but it begins to sync a moment later, that's OK because the
2105 * sync thread will block in dbuf_sync_leaf() until we drop db_mtx.
2107 mutex_enter(&db->db_mtx);
2109 if (txg <= spa_last_synced_txg(os->os_spa)) {
2111 * This txg has already synced. There's nothing to do.
2113 mutex_exit(&db->db_mtx);
2114 return (SET_ERROR(EEXIST));
2117 if (txg <= spa_syncing_txg(os->os_spa)) {
2119 * This txg is currently syncing, so we can't mess with
2120 * the dirty record anymore; just write a new log block.
2122 mutex_exit(&db->db_mtx);
2123 return (dmu_sync_late_arrival(pio, os, done, zgd, &zp, &zb));
2126 dr = dbuf_find_dirty_eq(db, txg);
2128 if (dr == NULL) {
2130 * There's no dr for this dbuf, so it must have been freed.
2131 * There's no need to log writes to freed blocks, so we're done.
2133 mutex_exit(&db->db_mtx);
2134 return (SET_ERROR(ENOENT));
2137 dr_next = list_next(&db->db_dirty_records, dr);
2138 ASSERT(dr_next == NULL || dr_next->dr_txg < txg);
2140 if (db->db_blkptr != NULL) {
2142 * We need to fill in zgd_bp with the current blkptr so that
2143 * the nopwrite code can check if we're writing the same
2144 * data that's already on disk. We can only nopwrite if we
2145 * are sure that after making the copy, db_blkptr will not
2146 * change until our i/o completes. We ensure this by
2147 * holding the db_mtx, and only allowing nopwrite if the
2148 * block is not already dirty (see below). This is verified
2149 * by dmu_sync_done(), which VERIFYs that the db_blkptr has
2150 * not changed.
2152 *zgd->zgd_bp = *db->db_blkptr;
2156 * Assume the on-disk data is X, the current syncing data (in
2157 * txg - 1) is Y, and the current in-memory data is Z (currently
2158 * in dmu_sync).
2160 * We usually want to perform a nopwrite if X and Z are the
2161 * same. However, if Y is different (i.e. the BP is going to
2162 * change before this write takes effect), then a nopwrite will
2163 * be incorrect - we would override with X, which could have
2164 * been freed when Y was written.
2166 * (Note that this is not a concern when we are nop-writing from
2167 * syncing context, because X and Y must be identical, because
2168 * all previous txgs have been synced.)
2170 * Therefore, we disable nopwrite if the current BP could change
2171 * before this TXG. There are two ways it could change: by
2172 * being dirty (dr_next is non-NULL), or by being freed
2173 * (dnode_block_freed()). This behavior is verified by
2174 * zio_done(), which VERIFYs that the override BP is identical
2175 * to the on-disk BP.
2177 if (dr_next != NULL) {
2178 zp.zp_nopwrite = B_FALSE;
2179 } else {
2180 DB_DNODE_ENTER(db);
2181 if (dnode_block_freed(DB_DNODE(db), db->db_blkid))
2182 zp.zp_nopwrite = B_FALSE;
2183 DB_DNODE_EXIT(db);
2186 ASSERT(dr->dr_txg == txg);
2187 if (dr->dt.dl.dr_override_state == DR_IN_DMU_SYNC ||
2188 dr->dt.dl.dr_override_state == DR_OVERRIDDEN) {
2190 * We have already issued a sync write for this buffer,
2191 * or this buffer has already been synced. It could not
2192 * have been dirtied since, or we would have cleared the state.
2194 mutex_exit(&db->db_mtx);
2195 return (SET_ERROR(EALREADY));
2198 ASSERT0(dr->dt.dl.dr_has_raw_params);
2199 ASSERT(dr->dt.dl.dr_override_state == DR_NOT_OVERRIDDEN);
2200 dr->dt.dl.dr_override_state = DR_IN_DMU_SYNC;
2201 mutex_exit(&db->db_mtx);
2203 dsa = kmem_alloc(sizeof (dmu_sync_arg_t), KM_SLEEP);
2204 dsa->dsa_dr = dr;
2205 dsa->dsa_done = done;
2206 dsa->dsa_zgd = zgd;
2207 dsa->dsa_tx = NULL;
2209 zio_nowait(arc_write(pio, os->os_spa, txg, zgd->zgd_bp,
2210 dr->dt.dl.dr_data, !DBUF_IS_CACHEABLE(db),
2211 dbuf_is_l2cacheable(db, NULL), &zp, dmu_sync_ready, NULL,
2212 dmu_sync_done, dsa, ZIO_PRIORITY_SYNC_WRITE, ZIO_FLAG_CANFAIL,
2213 &zb));
2215 return (0);
2219 dmu_object_set_nlevels(objset_t *os, uint64_t object, int nlevels, dmu_tx_t *tx)
2221 dnode_t *dn;
2222 int err;
2224 err = dnode_hold(os, object, FTAG, &dn);
2225 if (err)
2226 return (err);
2227 err = dnode_set_nlevels(dn, nlevels, tx);
2228 dnode_rele(dn, FTAG);
2229 return (err);
2233 dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, int ibs,
2234 dmu_tx_t *tx)
2236 dnode_t *dn;
2237 int err;
2239 err = dnode_hold(os, object, FTAG, &dn);
2240 if (err)
2241 return (err);
2242 err = dnode_set_blksz(dn, size, ibs, tx);
2243 dnode_rele(dn, FTAG);
2244 return (err);
2248 dmu_object_set_maxblkid(objset_t *os, uint64_t object, uint64_t maxblkid,
2249 dmu_tx_t *tx)
2251 dnode_t *dn;
2252 int err;
2254 err = dnode_hold(os, object, FTAG, &dn);
2255 if (err)
2256 return (err);
2257 rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
2258 dnode_new_blkid(dn, maxblkid, tx, B_FALSE, B_TRUE);
2259 rw_exit(&dn->dn_struct_rwlock);
2260 dnode_rele(dn, FTAG);
2261 return (0);
2264 void
2265 dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum,
2266 dmu_tx_t *tx)
2268 dnode_t *dn;
2271 * Send streams include each object's checksum function. This
2272 * check ensures that the receiving system can understand the
2273 * checksum function transmitted.
2275 ASSERT3U(checksum, <, ZIO_CHECKSUM_LEGACY_FUNCTIONS);
2277 VERIFY0(dnode_hold(os, object, FTAG, &dn));
2278 ASSERT3U(checksum, <, ZIO_CHECKSUM_FUNCTIONS);
2279 dn->dn_checksum = checksum;
2280 dnode_setdirty(dn, tx);
2281 dnode_rele(dn, FTAG);
2284 void
2285 dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress,
2286 dmu_tx_t *tx)
2288 dnode_t *dn;
2291 * Send streams include each object's compression function. This
2292 * check ensures that the receiving system can understand the
2293 * compression function transmitted.
2295 ASSERT3U(compress, <, ZIO_COMPRESS_LEGACY_FUNCTIONS);
2297 VERIFY0(dnode_hold(os, object, FTAG, &dn));
2298 dn->dn_compress = compress;
2299 dnode_setdirty(dn, tx);
2300 dnode_rele(dn, FTAG);
2304 * When the "redundant_metadata" property is set to "most", only indirect
2305 * blocks of this level and higher will have an additional ditto block.
2307 static const int zfs_redundant_metadata_most_ditto_level = 2;
2309 void
2310 dmu_write_policy(objset_t *os, dnode_t *dn, int level, int wp, zio_prop_t *zp)
2312 dmu_object_type_t type = dn ? dn->dn_type : DMU_OT_OBJSET;
2313 boolean_t ismd = (level > 0 || DMU_OT_IS_METADATA(type) ||
2314 (wp & WP_SPILL));
2315 enum zio_checksum checksum = os->os_checksum;
2316 enum zio_compress compress = os->os_compress;
2317 uint8_t complevel = os->os_complevel;
2318 enum zio_checksum dedup_checksum = os->os_dedup_checksum;
2319 boolean_t dedup = B_FALSE;
2320 boolean_t nopwrite = B_FALSE;
2321 boolean_t dedup_verify = os->os_dedup_verify;
2322 boolean_t encrypt = B_FALSE;
2323 int copies = os->os_copies;
2326 * We maintain different write policies for each of the following
2327 * types of data:
2328 * 1. metadata
2329 * 2. preallocated blocks (i.e. level-0 blocks of a dump device)
2330 * 3. all other level 0 blocks
2332 if (ismd) {
2334 * XXX -- we should design a compression algorithm
2335 * that specializes in arrays of bps.
2337 compress = zio_compress_select(os->os_spa,
2338 ZIO_COMPRESS_ON, ZIO_COMPRESS_ON);
2341 * Metadata always gets checksummed. If the data
2342 * checksum is multi-bit correctable, and it's not a
2343 * ZBT-style checksum, then it's suitable for metadata
2344 * as well. Otherwise, the metadata checksum defaults
2345 * to fletcher4.
2347 if (!(zio_checksum_table[checksum].ci_flags &
2348 ZCHECKSUM_FLAG_METADATA) ||
2349 (zio_checksum_table[checksum].ci_flags &
2350 ZCHECKSUM_FLAG_EMBEDDED))
2351 checksum = ZIO_CHECKSUM_FLETCHER_4;
2353 switch (os->os_redundant_metadata) {
2354 case ZFS_REDUNDANT_METADATA_ALL:
2355 copies++;
2356 break;
2357 case ZFS_REDUNDANT_METADATA_MOST:
2358 if (level >= zfs_redundant_metadata_most_ditto_level ||
2359 DMU_OT_IS_METADATA(type) || (wp & WP_SPILL))
2360 copies++;
2361 break;
2362 case ZFS_REDUNDANT_METADATA_SOME:
2363 if (DMU_OT_IS_CRITICAL(type))
2364 copies++;
2365 break;
2366 case ZFS_REDUNDANT_METADATA_NONE:
2367 break;
2370 if (dmu_ddt_copies > 0) {
2372 * If this tuneable is set, and this is a write for a
2373 * dedup entry store (zap or log), then we treat it
2374 * something like ZFS_REDUNDANT_METADATA_MOST on a
2375 * regular dataset: this many copies, and one more for
2376 * "higher" indirect blocks. This specific exception is
2377 * necessary because dedup objects are stored in the
2378 * MOS, which always has the highest possible copies.
2380 dmu_object_type_t stype =
2381 dn ? dn->dn_storage_type : DMU_OT_NONE;
2382 if (stype == DMU_OT_NONE)
2383 stype = type;
2384 if (stype == DMU_OT_DDT_ZAP) {
2385 copies = dmu_ddt_copies;
2386 if (level >=
2387 zfs_redundant_metadata_most_ditto_level)
2388 copies++;
2391 } else if (wp & WP_NOFILL) {
2392 ASSERT(level == 0);
2395 * If we're writing preallocated blocks, we aren't actually
2396 * writing them so don't set any policy properties. These
2397 * blocks are currently only used by an external subsystem
2398 * outside of zfs (i.e. dump) and not written by the zio
2399 * pipeline.
2401 compress = ZIO_COMPRESS_OFF;
2402 checksum = ZIO_CHECKSUM_OFF;
2403 } else {
2404 compress = zio_compress_select(os->os_spa, dn->dn_compress,
2405 compress);
2406 complevel = zio_complevel_select(os->os_spa, compress,
2407 complevel, complevel);
2409 checksum = (dedup_checksum == ZIO_CHECKSUM_OFF) ?
2410 zio_checksum_select(dn->dn_checksum, checksum) :
2411 dedup_checksum;
2414 * Determine dedup setting. If we are in dmu_sync(),
2415 * we won't actually dedup now because that's all
2416 * done in syncing context; but we do want to use the
2417 * dedup checksum. If the checksum is not strong
2418 * enough to ensure unique signatures, force
2419 * dedup_verify.
2421 if (dedup_checksum != ZIO_CHECKSUM_OFF) {
2422 dedup = (wp & WP_DMU_SYNC) ? B_FALSE : B_TRUE;
2423 if (!(zio_checksum_table[checksum].ci_flags &
2424 ZCHECKSUM_FLAG_DEDUP))
2425 dedup_verify = B_TRUE;
2429 * Enable nopwrite if we have secure enough checksum
2430 * algorithm (see comment in zio_nop_write) and
2431 * compression is enabled. We don't enable nopwrite if
2432 * dedup is enabled as the two features are mutually
2433 * exclusive.
2435 nopwrite = (!dedup && (zio_checksum_table[checksum].ci_flags &
2436 ZCHECKSUM_FLAG_NOPWRITE) &&
2437 compress != ZIO_COMPRESS_OFF && zfs_nopwrite_enabled);
2441 * All objects in an encrypted objset are protected from modification
2442 * via a MAC. Encrypted objects store their IV and salt in the last DVA
2443 * in the bp, so we cannot use all copies. Encrypted objects are also
2444 * not subject to nopwrite since writing the same data will still
2445 * result in a new ciphertext. Only encrypted blocks can be dedup'd
2446 * to avoid ambiguity in the dedup code since the DDT does not store
2447 * object types.
2449 if (os->os_encrypted && (wp & WP_NOFILL) == 0) {
2450 encrypt = B_TRUE;
2452 if (DMU_OT_IS_ENCRYPTED(type)) {
2453 copies = MIN(copies, SPA_DVAS_PER_BP - 1);
2454 nopwrite = B_FALSE;
2455 } else {
2456 dedup = B_FALSE;
2459 if (level <= 0 &&
2460 (type == DMU_OT_DNODE || type == DMU_OT_OBJSET)) {
2461 compress = ZIO_COMPRESS_EMPTY;
2465 zp->zp_compress = compress;
2466 zp->zp_complevel = complevel;
2467 zp->zp_checksum = checksum;
2468 zp->zp_type = (wp & WP_SPILL) ? dn->dn_bonustype : type;
2469 zp->zp_level = level;
2470 zp->zp_copies = MIN(copies, spa_max_replication(os->os_spa));
2471 zp->zp_dedup = dedup;
2472 zp->zp_dedup_verify = dedup && dedup_verify;
2473 zp->zp_nopwrite = nopwrite;
2474 zp->zp_encrypt = encrypt;
2475 zp->zp_byteorder = ZFS_HOST_BYTEORDER;
2476 zp->zp_direct_write = (wp & WP_DIRECT_WR) ? B_TRUE : B_FALSE;
2477 memset(zp->zp_salt, 0, ZIO_DATA_SALT_LEN);
2478 memset(zp->zp_iv, 0, ZIO_DATA_IV_LEN);
2479 memset(zp->zp_mac, 0, ZIO_DATA_MAC_LEN);
2480 zp->zp_zpl_smallblk = DMU_OT_IS_FILE(zp->zp_type) ?
2481 os->os_zpl_special_smallblock : 0;
2482 zp->zp_storage_type = dn ? dn->dn_storage_type : DMU_OT_NONE;
2484 ASSERT3U(zp->zp_compress, !=, ZIO_COMPRESS_INHERIT);
2488 * Reports the location of data and holes in an object. In order to
2489 * accurately report holes all dirty data must be synced to disk. This
2490 * causes extremely poor performance when seeking for holes in a dirty file.
2491 * As a compromise, only provide hole data when the dnode is clean. When
2492 * a dnode is dirty report the dnode as having no holes by returning EBUSY
2493 * which is always safe to do.
2496 dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, uint64_t *off)
2498 dnode_t *dn;
2499 int restarted = 0, err;
2501 restart:
2502 err = dnode_hold(os, object, FTAG, &dn);
2503 if (err)
2504 return (err);
2506 rw_enter(&dn->dn_struct_rwlock, RW_READER);
2508 if (dnode_is_dirty(dn)) {
2510 * If the zfs_dmu_offset_next_sync module option is enabled
2511 * then hole reporting has been requested. Dirty dnodes
2512 * must be synced to disk to accurately report holes.
2514 * Provided a RL_READER rangelock spanning 0-UINT64_MAX is
2515 * held by the caller only a single restart will be required.
2516 * We tolerate callers which do not hold the rangelock by
2517 * returning EBUSY and not reporting holes after one restart.
2519 if (zfs_dmu_offset_next_sync) {
2520 rw_exit(&dn->dn_struct_rwlock);
2521 dnode_rele(dn, FTAG);
2523 if (restarted)
2524 return (SET_ERROR(EBUSY));
2526 txg_wait_synced(dmu_objset_pool(os), 0);
2527 restarted = 1;
2528 goto restart;
2531 err = SET_ERROR(EBUSY);
2532 } else {
2533 err = dnode_next_offset(dn, DNODE_FIND_HAVELOCK |
2534 (hole ? DNODE_FIND_HOLE : 0), off, 1, 1, 0);
2537 rw_exit(&dn->dn_struct_rwlock);
2538 dnode_rele(dn, FTAG);
2540 return (err);
2544 dmu_read_l0_bps(objset_t *os, uint64_t object, uint64_t offset, uint64_t length,
2545 blkptr_t *bps, size_t *nbpsp)
2547 dmu_buf_t **dbp, *dbuf;
2548 dmu_buf_impl_t *db;
2549 blkptr_t *bp;
2550 int error, numbufs;
2552 error = dmu_buf_hold_array(os, object, offset, length, FALSE, FTAG,
2553 &numbufs, &dbp);
2554 if (error != 0) {
2555 if (error == ESRCH) {
2556 error = SET_ERROR(ENXIO);
2558 return (error);
2561 ASSERT3U(numbufs, <=, *nbpsp);
2563 for (int i = 0; i < numbufs; i++) {
2564 dbuf = dbp[i];
2565 db = (dmu_buf_impl_t *)dbuf;
2567 mutex_enter(&db->db_mtx);
2569 if (!list_is_empty(&db->db_dirty_records)) {
2570 dbuf_dirty_record_t *dr;
2572 dr = list_head(&db->db_dirty_records);
2573 if (dr->dt.dl.dr_brtwrite) {
2575 * This is very special case where we clone a
2576 * block and in the same transaction group we
2577 * read its BP (most likely to clone the clone).
2579 bp = &dr->dt.dl.dr_overridden_by;
2580 } else {
2582 * The block was modified in the same
2583 * transaction group.
2585 mutex_exit(&db->db_mtx);
2586 error = SET_ERROR(EAGAIN);
2587 goto out;
2589 } else {
2590 bp = db->db_blkptr;
2593 mutex_exit(&db->db_mtx);
2595 if (bp == NULL) {
2597 * The file size was increased, but the block was never
2598 * written, otherwise we would either have the block
2599 * pointer or the dirty record and would not get here.
2600 * It is effectively a hole, so report it as such.
2602 BP_ZERO(&bps[i]);
2603 continue;
2606 * Make sure we clone only data blocks.
2608 if (BP_IS_METADATA(bp) && !BP_IS_HOLE(bp)) {
2609 error = SET_ERROR(EINVAL);
2610 goto out;
2614 * If the block was allocated in transaction group that is not
2615 * yet synced, we could clone it, but we couldn't write this
2616 * operation into ZIL, or it may be impossible to replay, since
2617 * the block may appear not yet allocated at that point.
2619 if (BP_GET_BIRTH(bp) > spa_freeze_txg(os->os_spa)) {
2620 error = SET_ERROR(EINVAL);
2621 goto out;
2623 if (BP_GET_BIRTH(bp) > spa_last_synced_txg(os->os_spa)) {
2624 error = SET_ERROR(EAGAIN);
2625 goto out;
2628 bps[i] = *bp;
2631 *nbpsp = numbufs;
2632 out:
2633 dmu_buf_rele_array(dbp, numbufs, FTAG);
2635 return (error);
2639 dmu_brt_clone(objset_t *os, uint64_t object, uint64_t offset, uint64_t length,
2640 dmu_tx_t *tx, const blkptr_t *bps, size_t nbps)
2642 spa_t *spa;
2643 dmu_buf_t **dbp, *dbuf;
2644 dmu_buf_impl_t *db;
2645 struct dirty_leaf *dl;
2646 dbuf_dirty_record_t *dr;
2647 const blkptr_t *bp;
2648 int error = 0, i, numbufs;
2650 spa = os->os_spa;
2652 VERIFY0(dmu_buf_hold_array(os, object, offset, length, FALSE, FTAG,
2653 &numbufs, &dbp));
2654 ASSERT3U(nbps, ==, numbufs);
2657 * Before we start cloning make sure that the dbufs sizes match new BPs
2658 * sizes. If they don't, that's a no-go, as we are not able to shrink
2659 * dbufs.
2661 for (i = 0; i < numbufs; i++) {
2662 dbuf = dbp[i];
2663 db = (dmu_buf_impl_t *)dbuf;
2664 bp = &bps[i];
2666 ASSERT3U(db->db.db_object, !=, DMU_META_DNODE_OBJECT);
2667 ASSERT0(db->db_level);
2668 ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2669 ASSERT(db->db_blkid != DMU_SPILL_BLKID);
2671 if (!BP_IS_HOLE(bp) && BP_GET_LSIZE(bp) != dbuf->db_size) {
2672 error = SET_ERROR(EXDEV);
2673 goto out;
2677 for (i = 0; i < numbufs; i++) {
2678 dbuf = dbp[i];
2679 db = (dmu_buf_impl_t *)dbuf;
2680 bp = &bps[i];
2682 dmu_buf_will_clone_or_dio(dbuf, tx);
2684 mutex_enter(&db->db_mtx);
2686 dr = list_head(&db->db_dirty_records);
2687 VERIFY(dr != NULL);
2688 ASSERT3U(dr->dr_txg, ==, tx->tx_txg);
2689 dl = &dr->dt.dl;
2690 ASSERT0(dl->dr_has_raw_params);
2691 dl->dr_overridden_by = *bp;
2692 if (!BP_IS_HOLE(bp) || BP_GET_LOGICAL_BIRTH(bp) != 0) {
2693 if (!BP_IS_EMBEDDED(bp)) {
2694 BP_SET_BIRTH(&dl->dr_overridden_by, dr->dr_txg,
2695 BP_GET_BIRTH(bp));
2696 } else {
2697 BP_SET_LOGICAL_BIRTH(&dl->dr_overridden_by,
2698 dr->dr_txg);
2701 dl->dr_brtwrite = B_TRUE;
2702 dl->dr_override_state = DR_OVERRIDDEN;
2704 mutex_exit(&db->db_mtx);
2707 * When data in embedded into BP there is no need to create
2708 * BRT entry as there is no data block. Just copy the BP as
2709 * it contains the data.
2711 if (!BP_IS_HOLE(bp) && !BP_IS_EMBEDDED(bp)) {
2712 brt_pending_add(spa, bp, tx);
2715 out:
2716 dmu_buf_rele_array(dbp, numbufs, FTAG);
2718 return (error);
2721 void
2722 __dmu_object_info_from_dnode(dnode_t *dn, dmu_object_info_t *doi)
2724 dnode_phys_t *dnp = dn->dn_phys;
2726 doi->doi_data_block_size = dn->dn_datablksz;
2727 doi->doi_metadata_block_size = dn->dn_indblkshift ?
2728 1ULL << dn->dn_indblkshift : 0;
2729 doi->doi_type = dn->dn_type;
2730 doi->doi_bonus_type = dn->dn_bonustype;
2731 doi->doi_bonus_size = dn->dn_bonuslen;
2732 doi->doi_dnodesize = dn->dn_num_slots << DNODE_SHIFT;
2733 doi->doi_indirection = dn->dn_nlevels;
2734 doi->doi_checksum = dn->dn_checksum;
2735 doi->doi_compress = dn->dn_compress;
2736 doi->doi_nblkptr = dn->dn_nblkptr;
2737 doi->doi_physical_blocks_512 = (DN_USED_BYTES(dnp) + 256) >> 9;
2738 doi->doi_max_offset = (dn->dn_maxblkid + 1) * dn->dn_datablksz;
2739 doi->doi_fill_count = 0;
2740 for (int i = 0; i < dnp->dn_nblkptr; i++)
2741 doi->doi_fill_count += BP_GET_FILL(&dnp->dn_blkptr[i]);
2744 void
2745 dmu_object_info_from_dnode(dnode_t *dn, dmu_object_info_t *doi)
2747 rw_enter(&dn->dn_struct_rwlock, RW_READER);
2748 mutex_enter(&dn->dn_mtx);
2750 __dmu_object_info_from_dnode(dn, doi);
2752 mutex_exit(&dn->dn_mtx);
2753 rw_exit(&dn->dn_struct_rwlock);
2757 * Get information on a DMU object.
2758 * If doi is NULL, just indicates whether the object exists.
2761 dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi)
2763 dnode_t *dn;
2764 int err = dnode_hold(os, object, FTAG, &dn);
2766 if (err)
2767 return (err);
2769 if (doi != NULL)
2770 dmu_object_info_from_dnode(dn, doi);
2772 dnode_rele(dn, FTAG);
2773 return (0);
2777 * As above, but faster; can be used when you have a held dbuf in hand.
2779 void
2780 dmu_object_info_from_db(dmu_buf_t *db_fake, dmu_object_info_t *doi)
2782 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
2784 DB_DNODE_ENTER(db);
2785 dmu_object_info_from_dnode(DB_DNODE(db), doi);
2786 DB_DNODE_EXIT(db);
2790 * Faster still when you only care about the size.
2792 void
2793 dmu_object_size_from_db(dmu_buf_t *db_fake, uint32_t *blksize,
2794 u_longlong_t *nblk512)
2796 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
2797 dnode_t *dn;
2799 DB_DNODE_ENTER(db);
2800 dn = DB_DNODE(db);
2802 *blksize = dn->dn_datablksz;
2803 /* add in number of slots used for the dnode itself */
2804 *nblk512 = ((DN_USED_BYTES(dn->dn_phys) + SPA_MINBLOCKSIZE/2) >>
2805 SPA_MINBLOCKSHIFT) + dn->dn_num_slots;
2806 DB_DNODE_EXIT(db);
2809 void
2810 dmu_object_dnsize_from_db(dmu_buf_t *db_fake, int *dnsize)
2812 dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
2814 DB_DNODE_ENTER(db);
2815 *dnsize = DB_DNODE(db)->dn_num_slots << DNODE_SHIFT;
2816 DB_DNODE_EXIT(db);
2819 void
2820 byteswap_uint64_array(void *vbuf, size_t size)
2822 uint64_t *buf = vbuf;
2823 size_t count = size >> 3;
2824 int i;
2826 ASSERT((size & 7) == 0);
2828 for (i = 0; i < count; i++)
2829 buf[i] = BSWAP_64(buf[i]);
2832 void
2833 byteswap_uint32_array(void *vbuf, size_t size)
2835 uint32_t *buf = vbuf;
2836 size_t count = size >> 2;
2837 int i;
2839 ASSERT((size & 3) == 0);
2841 for (i = 0; i < count; i++)
2842 buf[i] = BSWAP_32(buf[i]);
2845 void
2846 byteswap_uint16_array(void *vbuf, size_t size)
2848 uint16_t *buf = vbuf;
2849 size_t count = size >> 1;
2850 int i;
2852 ASSERT((size & 1) == 0);
2854 for (i = 0; i < count; i++)
2855 buf[i] = BSWAP_16(buf[i]);
2858 void
2859 byteswap_uint8_array(void *vbuf, size_t size)
2861 (void) vbuf, (void) size;
2864 void
2865 dmu_init(void)
2867 abd_init();
2868 zfs_dbgmsg_init();
2869 sa_cache_init();
2870 dmu_objset_init();
2871 dnode_init();
2872 zfetch_init();
2873 dmu_tx_init();
2874 l2arc_init();
2875 arc_init();
2876 dbuf_init();
2879 void
2880 dmu_fini(void)
2882 arc_fini(); /* arc depends on l2arc, so arc must go first */
2883 l2arc_fini();
2884 dmu_tx_fini();
2885 zfetch_fini();
2886 dbuf_fini();
2887 dnode_fini();
2888 dmu_objset_fini();
2889 sa_cache_fini();
2890 zfs_dbgmsg_fini();
2891 abd_fini();
2894 EXPORT_SYMBOL(dmu_bonus_hold);
2895 EXPORT_SYMBOL(dmu_bonus_hold_by_dnode);
2896 EXPORT_SYMBOL(dmu_buf_hold_array_by_bonus);
2897 EXPORT_SYMBOL(dmu_buf_rele_array);
2898 EXPORT_SYMBOL(dmu_prefetch);
2899 EXPORT_SYMBOL(dmu_prefetch_by_dnode);
2900 EXPORT_SYMBOL(dmu_prefetch_dnode);
2901 EXPORT_SYMBOL(dmu_free_range);
2902 EXPORT_SYMBOL(dmu_free_long_range);
2903 EXPORT_SYMBOL(dmu_free_long_object);
2904 EXPORT_SYMBOL(dmu_read);
2905 EXPORT_SYMBOL(dmu_read_by_dnode);
2906 EXPORT_SYMBOL(dmu_read_uio);
2907 EXPORT_SYMBOL(dmu_read_uio_dbuf);
2908 EXPORT_SYMBOL(dmu_read_uio_dnode);
2909 EXPORT_SYMBOL(dmu_write);
2910 EXPORT_SYMBOL(dmu_write_by_dnode);
2911 EXPORT_SYMBOL(dmu_write_by_dnode_flags);
2912 EXPORT_SYMBOL(dmu_write_uio);
2913 EXPORT_SYMBOL(dmu_write_uio_dbuf);
2914 EXPORT_SYMBOL(dmu_write_uio_dnode);
2915 EXPORT_SYMBOL(dmu_prealloc);
2916 EXPORT_SYMBOL(dmu_object_info);
2917 EXPORT_SYMBOL(dmu_object_info_from_dnode);
2918 EXPORT_SYMBOL(dmu_object_info_from_db);
2919 EXPORT_SYMBOL(dmu_object_size_from_db);
2920 EXPORT_SYMBOL(dmu_object_dnsize_from_db);
2921 EXPORT_SYMBOL(dmu_object_set_nlevels);
2922 EXPORT_SYMBOL(dmu_object_set_blocksize);
2923 EXPORT_SYMBOL(dmu_object_set_maxblkid);
2924 EXPORT_SYMBOL(dmu_object_set_checksum);
2925 EXPORT_SYMBOL(dmu_object_set_compress);
2926 EXPORT_SYMBOL(dmu_offset_next);
2927 EXPORT_SYMBOL(dmu_write_policy);
2928 EXPORT_SYMBOL(dmu_sync);
2929 EXPORT_SYMBOL(dmu_request_arcbuf);
2930 EXPORT_SYMBOL(dmu_return_arcbuf);
2931 EXPORT_SYMBOL(dmu_assign_arcbuf_by_dnode);
2932 EXPORT_SYMBOL(dmu_assign_arcbuf_by_dbuf);
2933 EXPORT_SYMBOL(dmu_buf_hold);
2934 EXPORT_SYMBOL(dmu_ot);
2936 ZFS_MODULE_PARAM(zfs, zfs_, nopwrite_enabled, INT, ZMOD_RW,
2937 "Enable NOP writes");
2939 ZFS_MODULE_PARAM(zfs, zfs_, per_txg_dirty_frees_percent, UINT, ZMOD_RW,
2940 "Percentage of dirtied blocks from frees in one TXG");
2942 ZFS_MODULE_PARAM(zfs, zfs_, dmu_offset_next_sync, INT, ZMOD_RW,
2943 "Enable forcing txg sync to find holes");
2945 /* CSTYLED */
2946 ZFS_MODULE_PARAM(zfs, , dmu_prefetch_max, UINT, ZMOD_RW,
2947 "Limit one prefetch call to this size");
2949 /* CSTYLED */
2950 ZFS_MODULE_PARAM(zfs, , dmu_ddt_copies, UINT, ZMOD_RW,
2951 "Override copies= for dedup objects");