Allow dsl_deadlist_open() return errors
[zfs.git] / config / kernel.m4
blob78f178ff27acd13b0ad4fa87b62206d298634c5a
1 dnl #
2 dnl # Default ZFS kernel configuration
3 dnl #
4 AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
5         AM_COND_IF([BUILD_LINUX], [
6                 dnl # Setup the kernel build environment.
7                 ZFS_AC_KERNEL
8                 ZFS_AC_QAT
10                 dnl # Sanity checks for module building and CONFIG_* defines
11                 ZFS_AC_KERNEL_CONFIG_DEFINED
12                 ZFS_AC_MODULE_SYMVERS
14                 dnl # Sequential ZFS_LINUX_TRY_COMPILE tests
15                 ZFS_AC_KERNEL_FPU_HEADER
16                 ZFS_AC_KERNEL_OBJTOOL_HEADER
17                 ZFS_AC_KERNEL_MISC_MINOR
18                 ZFS_AC_KERNEL_DECLARE_EVENT_CLASS
20                 dnl # Parallel ZFS_LINUX_TEST_SRC / ZFS_LINUX_TEST_RESULT tests
21                 ZFS_AC_KERNEL_TEST_SRC
22                 ZFS_AC_KERNEL_TEST_RESULT
24                 AS_IF([test "$LINUX_OBJ" != "$LINUX"], [
25                         KERNEL_MAKE="$KERNEL_MAKE O=$LINUX_OBJ"
26                 ])
28                 AC_SUBST(KERNEL_MAKE)
29         ])
32 dnl #
33 dnl # Generate and compile all of the kernel API test cases to determine
34 dnl # which interfaces are available.  By invoking the kernel build system
35 dnl # only once the compilation can be done in parallel significantly
36 dnl # speeding up the process.
37 dnl #
38 AC_DEFUN([ZFS_AC_KERNEL_TEST_SRC], [
39         ZFS_AC_KERNEL_SRC_TYPES
40         ZFS_AC_KERNEL_SRC_OBJTOOL
41         ZFS_AC_KERNEL_SRC_ACCESS_OK_TYPE
42         ZFS_AC_KERNEL_SRC_PDE_DATA
43         ZFS_AC_KERNEL_SRC_GENERIC_FADVISE
44         ZFS_AC_KERNEL_SRC_SCHED
45         ZFS_AC_KERNEL_SRC_USLEEP_RANGE
46         ZFS_AC_KERNEL_SRC_VMALLOC_PAGE_KERNEL
47         ZFS_AC_KERNEL_SRC_INODE_TIMES
48         ZFS_AC_KERNEL_SRC_PROC_OPERATIONS
49         ZFS_AC_KERNEL_SRC_BLOCK_DEVICE_OPERATIONS
50         ZFS_AC_KERNEL_SRC_BIO
51         ZFS_AC_KERNEL_SRC_BLKDEV
52         ZFS_AC_KERNEL_SRC_BLK_QUEUE
53         ZFS_AC_KERNEL_SRC_GENHD_FLAGS
54         ZFS_AC_KERNEL_SRC_REVALIDATE_DISK
55         ZFS_AC_KERNEL_SRC_GET_DISK_RO
56         ZFS_AC_KERNEL_SRC_DISCARD_GRANULARITY
57         ZFS_AC_KERNEL_SRC_INODE_OWNER_OR_CAPABLE
58         ZFS_AC_KERNEL_SRC_XATTR
59         ZFS_AC_KERNEL_SRC_ACL
60         ZFS_AC_KERNEL_SRC_INODE_SETATTR
61         ZFS_AC_KERNEL_SRC_INODE_GETATTR
62         ZFS_AC_KERNEL_SRC_SHOW_OPTIONS
63         ZFS_AC_KERNEL_SRC_SHRINKER
64         ZFS_AC_KERNEL_SRC_MKDIR
65         ZFS_AC_KERNEL_SRC_LOOKUP_FLAGS
66         ZFS_AC_KERNEL_SRC_CREATE
67         ZFS_AC_KERNEL_SRC_PERMISSION
68         ZFS_AC_KERNEL_SRC_TMPFILE
69         ZFS_AC_KERNEL_SRC_AUTOMOUNT
70         ZFS_AC_KERNEL_SRC_COMMIT_METADATA
71         ZFS_AC_KERNEL_SRC_SETATTR_PREPARE
72         ZFS_AC_KERNEL_SRC_INSERT_INODE_LOCKED
73         ZFS_AC_KERNEL_SRC_TRUNCATE_SETSIZE
74         ZFS_AC_KERNEL_SRC_SECURITY_INODE
75         ZFS_AC_KERNEL_SRC_FST_MOUNT
76         ZFS_AC_KERNEL_SRC_SET_NLINK
77         ZFS_AC_KERNEL_SRC_SGET
78         ZFS_AC_KERNEL_SRC_VFS_FILEMAP_DIRTY_FOLIO
79         ZFS_AC_KERNEL_SRC_VFS_READ_FOLIO
80         ZFS_AC_KERNEL_SRC_VFS_MIGRATE_FOLIO
81         ZFS_AC_KERNEL_SRC_VFS_FSYNC_2ARGS
82         ZFS_AC_KERNEL_SRC_VFS_DIRECT_IO
83         ZFS_AC_KERNEL_SRC_VFS_READPAGES
84         ZFS_AC_KERNEL_SRC_VFS_SET_PAGE_DIRTY_NOBUFFERS
85         ZFS_AC_KERNEL_SRC_VFS_IOV_ITER
86         ZFS_AC_KERNEL_SRC_VFS_GENERIC_COPY_FILE_RANGE
87         ZFS_AC_KERNEL_SRC_VFS_SPLICE_COPY_FILE_RANGE
88         ZFS_AC_KERNEL_SRC_VFS_REMAP_FILE_RANGE
89         ZFS_AC_KERNEL_SRC_VFS_CLONE_FILE_RANGE
90         ZFS_AC_KERNEL_SRC_VFS_DEDUPE_FILE_RANGE
91         ZFS_AC_KERNEL_SRC_KMAP_ATOMIC_ARGS
92         ZFS_AC_KERNEL_SRC_KMAP_LOCAL_PAGE
93         ZFS_AC_KERNEL_SRC_FOLLOW_DOWN_ONE
94         ZFS_AC_KERNEL_SRC_MAKE_REQUEST_FN
95         ZFS_AC_KERNEL_SRC_GENERIC_IO_ACCT
96         ZFS_AC_KERNEL_SRC_FPU
97         ZFS_AC_KERNEL_SRC_FMODE_T
98         ZFS_AC_KERNEL_SRC_KUIDGID_T
99         ZFS_AC_KERNEL_SRC_KUID_HELPERS
100         ZFS_AC_KERNEL_SRC_RENAME
101         ZFS_AC_KERNEL_SRC_TOTALRAM_PAGES_FUNC
102         ZFS_AC_KERNEL_SRC_TOTALHIGH_PAGES
103         ZFS_AC_KERNEL_SRC_PERCPU
104         ZFS_AC_KERNEL_SRC_GENERIC_FILLATTR
105         ZFS_AC_KERNEL_SRC_MKNOD
106         ZFS_AC_KERNEL_SRC_SYMLINK
107         ZFS_AC_KERNEL_SRC_BIO_MAX_SEGS
108         ZFS_AC_KERNEL_SRC_SIGINFO
109         ZFS_AC_KERNEL_SRC_SYSFS
110         ZFS_AC_KERNEL_SRC_STANDALONE_LINUX_STDARG
111         ZFS_AC_KERNEL_SRC_STRLCPY
112         ZFS_AC_KERNEL_SRC_PAGEMAP_FOLIO_WAIT_BIT
113         ZFS_AC_KERNEL_SRC_ADD_DISK
114         ZFS_AC_KERNEL_SRC_KTHREAD
115         ZFS_AC_KERNEL_SRC_ZERO_PAGE
116         ZFS_AC_KERNEL_SRC___COPY_FROM_USER_INATOMIC
117         ZFS_AC_KERNEL_SRC_IDMAP_MNT_API
118         ZFS_AC_KERNEL_SRC_IDMAP_NO_USERNS
119         ZFS_AC_KERNEL_SRC_IATTR_VFSID
120         ZFS_AC_KERNEL_SRC_WRITEPAGE_T
121         ZFS_AC_KERNEL_SRC_RECLAIMED
122         ZFS_AC_KERNEL_SRC_REGISTER_SYSCTL_TABLE
123         ZFS_AC_KERNEL_SRC_REGISTER_SYSCTL_SZ
124         ZFS_AC_KERNEL_SRC_PROC_HANDLER_CTL_TABLE_CONST
125         ZFS_AC_KERNEL_SRC_COPY_SPLICE_READ
126         ZFS_AC_KERNEL_SRC_SYNC_BDEV
127         ZFS_AC_KERNEL_SRC_MM_PAGE_FLAGS
128         ZFS_AC_KERNEL_SRC_MM_PAGE_SIZE
129         ZFS_AC_KERNEL_SRC_MM_PAGE_MAPPING
130         ZFS_AC_KERNEL_SRC_FILE
131         case "$host_cpu" in
132                 powerpc*)
133                         ZFS_AC_KERNEL_SRC_CPU_HAS_FEATURE
134                         ZFS_AC_KERNEL_SRC_FLUSH_DCACHE_PAGE
135                         ;;
136                 riscv*)
137                         ZFS_AC_KERNEL_SRC_FLUSH_DCACHE_PAGE
138                         ;;
139         esac
141         AC_MSG_CHECKING([for available kernel interfaces])
142         ZFS_LINUX_TEST_COMPILE_ALL([kabi])
143         AC_MSG_RESULT([done])
146 dnl #
147 dnl # Check results of kernel interface tests.
148 dnl #
149 AC_DEFUN([ZFS_AC_KERNEL_TEST_RESULT], [
150         ZFS_AC_KERNEL_TYPES
151         ZFS_AC_KERNEL_ACCESS_OK_TYPE
152         ZFS_AC_KERNEL_OBJTOOL
153         ZFS_AC_KERNEL_PDE_DATA
154         ZFS_AC_KERNEL_GENERIC_FADVISE
155         ZFS_AC_KERNEL_SCHED
156         ZFS_AC_KERNEL_USLEEP_RANGE
157         ZFS_AC_KERNEL_VMALLOC_PAGE_KERNEL
158         ZFS_AC_KERNEL_INODE_TIMES
159         ZFS_AC_KERNEL_PROC_OPERATIONS
160         ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS
161         ZFS_AC_KERNEL_BIO
162         ZFS_AC_KERNEL_BLKDEV
163         ZFS_AC_KERNEL_BLK_QUEUE
164         ZFS_AC_KERNEL_GENHD_FLAGS
165         ZFS_AC_KERNEL_REVALIDATE_DISK
166         ZFS_AC_KERNEL_GET_DISK_RO
167         ZFS_AC_KERNEL_DISCARD_GRANULARITY
168         ZFS_AC_KERNEL_INODE_OWNER_OR_CAPABLE
169         ZFS_AC_KERNEL_XATTR
170         ZFS_AC_KERNEL_ACL
171         ZFS_AC_KERNEL_INODE_SETATTR
172         ZFS_AC_KERNEL_INODE_GETATTR
173         ZFS_AC_KERNEL_SHOW_OPTIONS
174         ZFS_AC_KERNEL_SHRINKER
175         ZFS_AC_KERNEL_MKDIR
176         ZFS_AC_KERNEL_LOOKUP_FLAGS
177         ZFS_AC_KERNEL_CREATE
178         ZFS_AC_KERNEL_PERMISSION
179         ZFS_AC_KERNEL_TMPFILE
180         ZFS_AC_KERNEL_AUTOMOUNT
181         ZFS_AC_KERNEL_COMMIT_METADATA
182         ZFS_AC_KERNEL_SETATTR_PREPARE
183         ZFS_AC_KERNEL_INSERT_INODE_LOCKED
184         ZFS_AC_KERNEL_TRUNCATE_SETSIZE
185         ZFS_AC_KERNEL_SECURITY_INODE
186         ZFS_AC_KERNEL_FST_MOUNT
187         ZFS_AC_KERNEL_SET_NLINK
188         ZFS_AC_KERNEL_SGET
189         ZFS_AC_KERNEL_VFS_FILEMAP_DIRTY_FOLIO
190         ZFS_AC_KERNEL_VFS_READ_FOLIO
191         ZFS_AC_KERNEL_VFS_MIGRATE_FOLIO
192         ZFS_AC_KERNEL_VFS_FSYNC_2ARGS
193         ZFS_AC_KERNEL_VFS_DIRECT_IO
194         ZFS_AC_KERNEL_VFS_READPAGES
195         ZFS_AC_KERNEL_VFS_SET_PAGE_DIRTY_NOBUFFERS
196         ZFS_AC_KERNEL_VFS_IOV_ITER
197         ZFS_AC_KERNEL_VFS_GENERIC_COPY_FILE_RANGE
198         ZFS_AC_KERNEL_VFS_SPLICE_COPY_FILE_RANGE
199         ZFS_AC_KERNEL_VFS_REMAP_FILE_RANGE
200         ZFS_AC_KERNEL_VFS_CLONE_FILE_RANGE
201         ZFS_AC_KERNEL_VFS_DEDUPE_FILE_RANGE
202         ZFS_AC_KERNEL_KMAP_ATOMIC_ARGS
203         ZFS_AC_KERNEL_KMAP_LOCAL_PAGE
204         ZFS_AC_KERNEL_FOLLOW_DOWN_ONE
205         ZFS_AC_KERNEL_MAKE_REQUEST_FN
206         ZFS_AC_KERNEL_GENERIC_IO_ACCT
207         ZFS_AC_KERNEL_FPU
208         ZFS_AC_KERNEL_FMODE_T
209         ZFS_AC_KERNEL_KUIDGID_T
210         ZFS_AC_KERNEL_KUID_HELPERS
211         ZFS_AC_KERNEL_RENAME
212         ZFS_AC_KERNEL_TOTALRAM_PAGES_FUNC
213         ZFS_AC_KERNEL_TOTALHIGH_PAGES
214         ZFS_AC_KERNEL_PERCPU
215         ZFS_AC_KERNEL_GENERIC_FILLATTR
216         ZFS_AC_KERNEL_MKNOD
217         ZFS_AC_KERNEL_SYMLINK
218         ZFS_AC_KERNEL_BIO_MAX_SEGS
219         ZFS_AC_KERNEL_SIGINFO
220         ZFS_AC_KERNEL_SYSFS
221         ZFS_AC_KERNEL_STANDALONE_LINUX_STDARG
222         ZFS_AC_KERNEL_STRLCPY
223         ZFS_AC_KERNEL_PAGEMAP_FOLIO_WAIT_BIT
224         ZFS_AC_KERNEL_ADD_DISK
225         ZFS_AC_KERNEL_KTHREAD
226         ZFS_AC_KERNEL_ZERO_PAGE
227         ZFS_AC_KERNEL___COPY_FROM_USER_INATOMIC
228         ZFS_AC_KERNEL_IDMAP_MNT_API
229         ZFS_AC_KERNEL_IDMAP_NO_USERNS
230         ZFS_AC_KERNEL_IATTR_VFSID
231         ZFS_AC_KERNEL_WRITEPAGE_T
232         ZFS_AC_KERNEL_RECLAIMED
233         ZFS_AC_KERNEL_REGISTER_SYSCTL_TABLE
234         ZFS_AC_KERNEL_REGISTER_SYSCTL_SZ
235         ZFS_AC_KERNEL_PROC_HANDLER_CTL_TABLE_CONST
236         ZFS_AC_KERNEL_COPY_SPLICE_READ
237         ZFS_AC_KERNEL_SYNC_BDEV
238         ZFS_AC_KERNEL_MM_PAGE_FLAGS
239         ZFS_AC_KERNEL_MM_PAGE_SIZE
240         ZFS_AC_KERNEL_MM_PAGE_MAPPING
241         ZFS_AC_KERNEL_1ARG_ASSIGN_STR
242         ZFS_AC_KERNEL_FILE
243         case "$host_cpu" in
244                 powerpc*)
245                         ZFS_AC_KERNEL_CPU_HAS_FEATURE
246                         ZFS_AC_KERNEL_FLUSH_DCACHE_PAGE
247                         ;;
248                 riscv*)
249                         ZFS_AC_KERNEL_FLUSH_DCACHE_PAGE
250                         ;;
251         esac
254 dnl #
255 dnl # Detect name used for Module.symvers file in kernel
256 dnl #
257 AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [
258         modpost=$LINUX/scripts/Makefile.modpost
259         AC_MSG_CHECKING([kernel file name for module symbols])
260         AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [
261                 AS_IF([grep -q Modules.symvers $modpost], [
262                         LINUX_SYMBOLS=Modules.symvers
263                 ], [
264                         LINUX_SYMBOLS=Module.symvers
265                 ])
267                 AS_IF([test ! -f "$LINUX_OBJ/$LINUX_SYMBOLS"], [
268                         AC_MSG_ERROR([
269         *** Please make sure the kernel devel package for your distribution
270         *** is installed.  If you are building with a custom kernel, make sure
271         *** the kernel is configured, built, and the '--with-linux=PATH'
272         *** configure option refers to the location of the kernel source.
273                         ])
274                 ])
275         ], [
276                 LINUX_SYMBOLS=NONE
277         ])
278         AC_MSG_RESULT($LINUX_SYMBOLS)
279         AC_SUBST(LINUX_SYMBOLS)
282 dnl #
283 dnl # Detect the kernel to be built against
284 dnl #
285 dnl # Most modern Linux distributions have separate locations for bare
286 dnl # source (source) and prebuilt (build) files. Additionally, there are
287 dnl # `source` and `build` symlinks in `/lib/modules/$(KERNEL_VERSION)`
288 dnl # pointing to them. The directory search order is now:
289 dnl # 
290 dnl # - `configure` command line values if both `--with-linux` and
291 dnl #   `--with-linux-obj` were defined
292 dnl # 
293 dnl # - If only `--with-linux` was defined, `--with-linux-obj` is assumed
294 dnl #   to have the same value as `--with-linux`
295 dnl # 
296 dnl # - If neither `--with-linux` nor `--with-linux-obj` were defined
297 dnl #   autodetection is used:
298 dnl # 
299 dnl #   - `/lib/modules/$(uname -r)/{source,build}` respectively, if exist.
300 dnl # 
301 dnl #   - If only `/lib/modules/$(uname -r)/build` exists, it is assumed
302 dnl #     to be both source and build directory.
303 dnl # 
304 dnl #   - The first directory in `/lib/modules` with the highest version
305 dnl #     number according to `sort -V` which contains both `source` and
306 dnl #     `build` symlinks/directories. If module directory contains only
307 dnl #     `build` component, it is assumed to be both source and build
308 dnl #     directory.
309 dnl # 
310 dnl #   - Last resort: the first directory matching `/usr/src/kernels/*`
311 dnl #     and `/usr/src/linux-*` with the highest version number according
312 dnl #     to `sort -V` is assumed to be both source and build directory.
313 dnl #
314 AC_DEFUN([ZFS_AC_KERNEL], [
315         AC_ARG_WITH([linux],
316                 AS_HELP_STRING([--with-linux=PATH],
317                 [Path to kernel source]),
318                 [kernelsrc="$withval"])
320         AC_ARG_WITH(linux-obj,
321                 AS_HELP_STRING([--with-linux-obj=PATH],
322                 [Path to kernel build objects]),
323                 [kernelbuild="$withval"])
325         AC_MSG_CHECKING([kernel source and build directories])
326         AS_IF([test -n "$kernelsrc" && test -z "$kernelbuild"], [
327                 kernelbuild="$kernelsrc"
328         ], [test -z "$kernelsrc"], [
329                 AS_IF([test -e "/lib/modules/$(uname -r)/source" && \
330                        test -e "/lib/modules/$(uname -r)/build"], [
331                         src="/lib/modules/$(uname -r)/source"
332                         build="/lib/modules/$(uname -r)/build"
333                 ], [test -e "/lib/modules/$(uname -r)/build"], [
334                         build="/lib/modules/$(uname -r)/build"
335                         src="$build"
336                 ], [
337                         src=
339                         for d in $(ls -1d /lib/modules/* 2>/dev/null | sort -Vr); do
340                                 if test -e "$d/source" && test -e "$d/build"; then
341                                         src="$d/source"
342                                         build="$d/build"
343                                         break
344                                 fi
346                                 if test -e "$d/build"; then
347                                         src="$d/build"
348                                         build="$d/build"
349                                         break
350                                 fi
351                         done
353                         # the least reliable method
354                         if test -z "$src"; then
355                                 src=$(ls -1d /usr/src/kernels/* /usr/src/linux-* \
356                                       2>/dev/null | grep -v obj | sort -Vr | head -1)
357                                 build="$src"
358                         fi
359                 ])
361                 AS_IF([test -n "$src" && test -e "$src"], [
362                         kernelsrc=$(readlink -e "$src")
363                 ], [
364                         kernelsrc="[Not found]"
365                 ])
366                 AS_IF([test -n "$build" && test -e "$build"], [
367                         kernelbuild=$(readlink -e "$build")
368                 ], [
369                         kernelbuild="[Not found]"
370                 ])
371         ], [
372                 AS_IF([test "$kernelsrc" = "NONE"], [
373                         kernsrcver=NONE
374                 ])
375                 withlinux=yes
376         ])
378         AC_MSG_RESULT([done])
379         AC_MSG_CHECKING([kernel source directory])
380         AC_MSG_RESULT([$kernelsrc])
381         AC_MSG_CHECKING([kernel build directory])
382         AC_MSG_RESULT([$kernelbuild])
383         AS_IF([test ! -d "$kernelsrc" || test ! -d "$kernelbuild"], [
384                 AC_MSG_ERROR([
385         *** Please make sure the kernel devel package for your distribution
386         *** is installed and then try again.  If that fails, you can specify the
387         *** location of the kernel source and build with the '--with-linux=PATH' and
388         *** '--with-linux-obj=PATH' options respectively.])
389         ])
391         AC_MSG_CHECKING([kernel source version])
392         utsrelease1=$kernelbuild/include/linux/version.h
393         utsrelease2=$kernelbuild/include/linux/utsrelease.h
394         utsrelease3=$kernelbuild/include/generated/utsrelease.h
395         AS_IF([test -r $utsrelease1 && grep -qF UTS_RELEASE $utsrelease1], [
396                 utsrelease=$utsrelease1
397         ], [test -r $utsrelease2 && grep -qF UTS_RELEASE $utsrelease2], [
398                 utsrelease=$utsrelease2
399         ], [test -r $utsrelease3 && grep -qF UTS_RELEASE $utsrelease3], [
400                 utsrelease=$utsrelease3
401         ])
403         AS_IF([test -n "$utsrelease"], [
404                 kernsrcver=$($AWK '/UTS_RELEASE/ { gsub(/"/, "", $[3]); print $[3] }' $utsrelease)
405                 AS_IF([test -z "$kernsrcver"], [
406                         AC_MSG_RESULT([Not found])
407                         AC_MSG_ERROR([
408         *** Cannot determine kernel version.
409                         ])
410                 ])
411         ], [
412                 AC_MSG_RESULT([Not found])
413                 if test "x$enable_linux_builtin" != xyes; then
414                         AC_MSG_ERROR([
415         *** Cannot find UTS_RELEASE definition.
416                         ])
417                 else
418                         AC_MSG_ERROR([
419         *** Cannot find UTS_RELEASE definition.
420         *** Please run 'make prepare' inside the kernel source tree.])
421                 fi
422         ])
424         AC_MSG_RESULT([$kernsrcver])
426         AX_COMPARE_VERSION([$kernsrcver], [ge], [$ZFS_META_KVER_MIN], [], [
427                 AC_MSG_ERROR([
428         *** Cannot build against kernel version $kernsrcver.
429         *** The minimum supported kernel version is $ZFS_META_KVER_MIN.
430                 ])
431         ])
433         AC_ARG_ENABLE([linux-experimental],
434                 AS_HELP_STRING([--enable-linux-experimental],
435                 [Allow building against some unsupported kernel versions]))
437         AX_COMPARE_VERSION([$kernsrcver], [ge], [$ZFS_META_KVER_MAX], [
438                 AX_COMPARE_VERSION([$kernsrcver], [eq2], [$ZFS_META_KVER_MAX], [
439                         kern_max_version_ok=yes
440                 ], [
441                         kern_max_version_ok=no
442                 ])
443         ], [
444                 kern_max_version_ok=yes
445         ])
447         AS_IF([test "x$kern_max_version_ok" != "xyes"], [
448                 AS_IF([test "x$enable_linux_experimental" == "xyes"], [
449                         AC_DEFINE(HAVE_LINUX_EXPERIMENTAL, 1,
450                             [building against unsupported kernel version])
451                 ], [
452                         AC_MSG_ERROR([
453         *** Cannot build against kernel version $kernsrcver.
454         *** The maximum supported kernel version is $ZFS_META_KVER_MAX.
455                         ])
456                 ])
457         ])
459         LINUX=${kernelsrc}
460         LINUX_OBJ=${kernelbuild}
461         LINUX_VERSION=${kernsrcver}
463         AC_SUBST(LINUX)
464         AC_SUBST(LINUX_OBJ)
465         AC_SUBST(LINUX_VERSION)
468 AC_DEFUN([ZFS_AC_KERNEL_VERSION_WARNING], [
469         AS_IF([test "x$enable_linux_experimental" = "xyes" && \
470             test "x$kern_max_version_ok" != "xyes"], [
471                 AC_MSG_WARN([
473         You are building OpenZFS against Linux version $kernsrcver.
475         This combination is considered EXPERIMENTAL by the OpenZFS project.
476         Even if it appears to build and run correctly, there may be bugs that
477         can cause SERIOUS DATA LOSS.
479         YOU HAVE BEEN WARNED!
481         If you choose to continue, we'd appreciate if you could report your
482         results on the OpenZFS issue tracker at:
484             https://github.com/openzfs/zfs/issues/new
486         Your feedback will help us prepare a new OpenZFS release that supports
487         this version of Linux.
488                 ])
489         ])
492 dnl #
493 dnl # Detect the QAT module to be built against, QAT provides hardware
494 dnl # acceleration for data compression:
495 dnl #
496 dnl # https://01.org/intel-quickassist-technology
497 dnl #
498 dnl # 1) Download and install QAT driver from the above link
499 dnl # 2) Start QAT driver in your system:
500 dnl #    service qat_service start
501 dnl # 3) Enable QAT in ZFS, e.g.:
502 dnl #    ./configure --with-qat=<qat-driver-path>/QAT1.6
503 dnl #    make
504 dnl # 4) Set GZIP compression in ZFS dataset:
505 dnl #    zfs set compression = gzip <dataset>
506 dnl #
507 dnl # Then the data written to this ZFS pool is compressed by QAT accelerator
508 dnl # automatically, and de-compressed by QAT when read from the pool.
509 dnl #
510 dnl # 1) Get QAT hardware statistics with:
511 dnl #    cat /proc/icp_dh895xcc_dev/qat
512 dnl # 2) To disable QAT:
513 dnl #    insmod zfs.ko zfs_qat_disable=1
514 dnl #
515 AC_DEFUN([ZFS_AC_QAT], [
516         AC_ARG_WITH([qat],
517                 AS_HELP_STRING([--with-qat=PATH],
518                 [Path to qat source]),
519                 AS_IF([test "$withval" = "yes"],
520                         AC_MSG_ERROR([--with-qat=PATH requires a PATH]),
521                         [qatsrc="$withval"]))
523         AC_ARG_WITH([qat-obj],
524                 AS_HELP_STRING([--with-qat-obj=PATH],
525                 [Path to qat build objects]),
526                 [qatbuild="$withval"])
528         AS_IF([test ! -z "${qatsrc}"], [
529                 AC_MSG_CHECKING([qat source directory])
530                 AC_MSG_RESULT([$qatsrc])
531                 QAT_SRC="${qatsrc}/quickassist"
532                 AS_IF([ test ! -e "$QAT_SRC/include/cpa.h"], [
533                         AC_MSG_ERROR([
534         *** Please make sure the qat driver package is installed
535         *** and specify the location of the qat source with the
536         *** '--with-qat=PATH' option then try again. Failed to
537         *** find cpa.h in:
538         ${QAT_SRC}/include])
539                 ])
540         ])
542         AS_IF([test ! -z "${qatsrc}"], [
543                 AC_MSG_CHECKING([qat build directory])
544                 AS_IF([test -z "$qatbuild"], [
545                         qatbuild="${qatsrc}/build"
546                 ])
548                 AC_MSG_RESULT([$qatbuild])
549                 QAT_OBJ=${qatbuild}
550                 AS_IF([ ! test -e "$QAT_OBJ/icp_qa_al.ko" && ! test -e "$QAT_OBJ/qat_api.ko"], [
551                         AC_MSG_ERROR([
552         *** Please make sure the qat driver is installed then try again.
553         *** Failed to find icp_qa_al.ko or qat_api.ko in:
554         $QAT_OBJ])
555                 ])
557                 AC_SUBST(QAT_SRC)
558                 AC_SUBST(QAT_OBJ)
560                 AC_DEFINE(HAVE_QAT, 1,
561                 [qat is enabled and existed])
562         ])
564         dnl #
565         dnl # Detect the name used for the QAT Module.symvers file.
566         dnl #
567         AS_IF([test ! -z "${qatsrc}"], [
568                 AC_MSG_CHECKING([qat file for module symbols])
569                 QAT_SYMBOLS=$QAT_SRC/lookaside/access_layer/src/Module.symvers
571                 AS_IF([test -r $QAT_SYMBOLS], [
572                         AC_MSG_RESULT([$QAT_SYMBOLS])
573                         AC_SUBST(QAT_SYMBOLS)
574                 ],[
575                         AC_MSG_ERROR([
576         *** Please make sure the qat driver is installed then try again.
577         *** Failed to find Module.symvers in:
578         $QAT_SYMBOLS
579                         ])
580                 ])
581         ])
584 dnl #
585 dnl # ZFS_LINUX_CONFTEST_H
586 dnl #
587 AC_DEFUN([ZFS_LINUX_CONFTEST_H], [
588 test -d build/$2 || mkdir -p build/$2
589 cat - <<_ACEOF >build/$2/$2.h
591 _ACEOF
594 dnl #
595 dnl # ZFS_LINUX_CONFTEST_C
596 dnl #
597 AC_DEFUN([ZFS_LINUX_CONFTEST_C], [
598 test -d build/$2 || mkdir -p build/$2
599 cat confdefs.h - <<_ACEOF >build/$2/$2.c
601 _ACEOF
604 dnl #
605 dnl # ZFS_LINUX_CONFTEST_MAKEFILE
606 dnl #
607 dnl # $1 - test case name
608 dnl # $2 - add to top-level Makefile
609 dnl # $3 - additional build flags
610 dnl #
611 AC_DEFUN([ZFS_LINUX_CONFTEST_MAKEFILE], [
612         test -d build || mkdir -p build
613         test -d build/$1 || mkdir -p build/$1
615         file=build/$1/Makefile
617         dnl # Example command line to manually build source.
618         cat - <<_ACEOF >$file
619 # Example command line to manually build source
620 # make modules -C $LINUX_OBJ $ARCH_UM M=$PWD/build/$1
622 ccflags-y := -Werror $FRAME_LARGER_THAN
623 _ACEOF
625         dnl # Additional custom CFLAGS as requested.
626         m4_ifval($3, [echo "ccflags-y += $3" >>$file], [])
628         dnl # Test case source
629         echo "obj-m := $1.o" >>$file
631         AS_IF([test "x$2" = "xyes"], [echo "obj-m += $1/" >>build/Makefile], [])
634 dnl #
635 dnl # ZFS_LINUX_TEST_PROGRAM(C)([PROLOGUE], [BODY])
636 dnl #
637 m4_define([ZFS_LINUX_TEST_PROGRAM], [
638 #include <linux/module.h>
642 main (void)
645         ;
646         return 0;
649 MODULE_DESCRIPTION("conftest");
650 MODULE_AUTHOR(ZFS_META_AUTHOR);
651 MODULE_VERSION(ZFS_META_VERSION "-" ZFS_META_RELEASE);
652 MODULE_LICENSE($3);
655 dnl #
656 dnl # ZFS_LINUX_TEST_REMOVE
657 dnl #
658 dnl # Removes the specified test source and results.
659 dnl #
660 AC_DEFUN([ZFS_LINUX_TEST_REMOVE], [
661         test -d build/$1 && rm -Rf build/$1
662         test -f build/Makefile && sed '/$1/d' build/Makefile
665 dnl #
666 dnl # ZFS_LINUX_COMPILE
667 dnl #
668 dnl # $1 - build dir
669 dnl # $2 - test command
670 dnl # $3 - pass command
671 dnl # $4 - fail command
672 dnl # $5 - set KBUILD_MODPOST_NOFINAL='yes'
673 dnl # $6 - set KBUILD_MODPOST_WARN='yes'
674 dnl #
675 dnl # Used internally by ZFS_LINUX_TEST_{COMPILE,MODPOST}
676 dnl #
677 AC_DEFUN([ZFS_LINUX_COMPILE], [
678         AC_ARG_VAR([KERNEL_CC], [C compiler for
679                 building kernel modules])
680         AC_ARG_VAR([KERNEL_LD], [Linker for
681                 building kernel modules])
682         AC_ARG_VAR([KERNEL_LLVM], [Binary option to
683                 build kernel modules with LLVM/CLANG toolchain])
684         AC_TRY_COMMAND([
685             KBUILD_MODPOST_NOFINAL="$5" KBUILD_MODPOST_WARN="$6"
686             make modules -k -j$TEST_JOBS ${KERNEL_CC:+CC=$KERNEL_CC}
687             ${KERNEL_LD:+LD=$KERNEL_LD} ${KERNEL_LLVM:+LLVM=$KERNEL_LLVM}
688             CONFIG_MODULES=y CFLAGS_MODULE=-DCONFIG_MODULES
689             -C $LINUX_OBJ $ARCH_UM M=$PWD/$1 >$1/build.log 2>&1])
690         AS_IF([AC_TRY_COMMAND([$2])], [$3], [$4])
693 dnl #
694 dnl # ZFS_LINUX_TEST_COMPILE
695 dnl #
696 dnl # Perform a full compile excluding the final modpost phase.
697 dnl #
698 AC_DEFUN([ZFS_LINUX_TEST_COMPILE], [
699         ZFS_LINUX_COMPILE([$2], [test -f $2/build.log], [
700                 mv $2/Makefile $2/Makefile.compile.$1
701                 mv $2/build.log $2/build.log.$1
702         ],[
703                 AC_MSG_ERROR([
704         *** Unable to compile test source to determine kernel interfaces.])
705         ], [yes], [])
708 dnl #
709 dnl # ZFS_LINUX_TEST_MODPOST
710 dnl #
711 dnl # Perform a full compile including the modpost phase.  This may
712 dnl # be an incremental build if the objects have already been built.
713 dnl #
714 AC_DEFUN([ZFS_LINUX_TEST_MODPOST], [
715         ZFS_LINUX_COMPILE([$2], [test -f $2/build.log], [
716                 mv $2/Makefile $2/Makefile.modpost.$1
717                 cat $2/build.log >>build/build.log.$1
718         ],[
719                 AC_MSG_ERROR([
720         *** Unable to modpost test source to determine kernel interfaces.])
721         ], [], [yes])
724 dnl #
725 dnl # Perform the compilation of the test cases in two phases.
726 dnl #
727 dnl # Phase 1) attempt to build the object files for all of the tests
728 dnl #          defined by the ZFS_LINUX_TEST_SRC macro.  But do not
729 dnl #          perform the final modpost stage.
730 dnl #
731 dnl # Phase 2) disable all tests which failed the initial compilation,
732 dnl #          then invoke the final modpost step for the remaining tests.
733 dnl #
734 dnl # This allows us efficiently build the test cases in parallel while
735 dnl # remaining resilient to build failures which are expected when
736 dnl # detecting the available kernel interfaces.
737 dnl #
738 dnl # The maximum allowed parallelism can be controlled by setting the
739 dnl # TEST_JOBS environment variable.  Otherwise, it default to $(nproc).
740 dnl #
741 AC_DEFUN([ZFS_LINUX_TEST_COMPILE_ALL], [
742         dnl # Phase 1 - Compilation only, final linking is skipped.
743         ZFS_LINUX_TEST_COMPILE([$1], [build])
745         dnl #
746         dnl # Phase 2 - When building external modules disable test cases
747         dnl # which failed to compile and invoke modpost to verify the
748         dnl # final linking.
749         dnl #
750         dnl # Test names suffixed with '_license' call modpost independently
751         dnl # to ensure that a single incompatibility does not result in the
752         dnl # modpost phase exiting early.  This check is not performed on
753         dnl # every symbol since the majority are compatible and doing so
754         dnl # would significantly slow down this phase.
755         dnl #
756         dnl # When configuring for builtin (--enable-linux-builtin)
757         dnl # fake the linking step artificially create the expected .ko
758         dnl # files for tests which did compile.  This is required for
759         dnl # kernels which do not have loadable module support or have
760         dnl # not yet been built.
761         dnl #
762         AS_IF([test "x$enable_linux_builtin" = "xno"], [
763                 for dir in $(awk '/^obj-m/ { print [$]3 }' \
764                     build/Makefile.compile.$1); do
765                         name=${dir%/}
766                         AS_IF([test -f build/$name/$name.o], [
767                                 AS_IF([test "${name##*_}" = "license"], [
768                                         ZFS_LINUX_TEST_MODPOST([$1],
769                                             [build/$name])
770                                         echo "obj-n += $dir" >>build/Makefile
771                                 ], [
772                                         echo "obj-m += $dir" >>build/Makefile
773                                 ])
774                         ], [
775                                 echo "obj-n += $dir" >>build/Makefile
776                         ])
777                 done
779                 ZFS_LINUX_TEST_MODPOST([$1], [build])
780         ], [
781                 for dir in $(awk '/^obj-m/ { print [$]3 }' \
782                     build/Makefile.compile.$1); do
783                         name=${dir%/}
784                         AS_IF([test -f build/$name/$name.o], [
785                                 touch build/$name/$name.ko
786                         ])
787                 done
788         ])
791 dnl #
792 dnl # ZFS_LINUX_TEST_SRC
793 dnl #
794 dnl # $1 - name
795 dnl # $2 - global
796 dnl # $3 - source
797 dnl # $4 - extra cflags
798 dnl # $5 - check license-compatibility
799 dnl #
800 dnl # Check if the test source is buildable at all and then if it is
801 dnl # license compatible.
802 dnl #
803 dnl # N.B because all of the test cases are compiled in parallel they
804 dnl # must never depend on the results of previous tests.  Each test
805 dnl # needs to be entirely independent.
806 dnl #
807 AC_DEFUN([ZFS_LINUX_TEST_SRC], [
808         ZFS_LINUX_CONFTEST_C([ZFS_LINUX_TEST_PROGRAM([[$2]], [[$3]],
809             [["Dual BSD/GPL"]])], [$1])
810         ZFS_LINUX_CONFTEST_MAKEFILE([$1], [yes], [$4])
812         AS_IF([ test -n "$5" ], [
813                 ZFS_LINUX_CONFTEST_C([ZFS_LINUX_TEST_PROGRAM(
814                     [[$2]], [[$3]], [[$5]])], [$1_license])
815                 ZFS_LINUX_CONFTEST_MAKEFILE([$1_license], [yes], [$4])
816         ])
819 dnl #
820 dnl # ZFS_LINUX_TEST_RESULT
821 dnl #
822 dnl # $1 - name of a test source (ZFS_LINUX_TEST_SRC)
823 dnl # $2 - run on success (valid .ko generated)
824 dnl # $3 - run on failure (unable to compile)
825 dnl #
826 AC_DEFUN([ZFS_LINUX_TEST_RESULT], [
827         AS_IF([test -d build/$1], [
828                 AS_IF([test -f build/$1/$1.ko], [$2], [$3])
829         ], [
830                 AC_MSG_ERROR([
831         *** No matching source for the "$1" test, check that
832         *** both the test source and result macros refer to the same name.
833                 ])
834         ])
837 dnl #
838 dnl # ZFS_LINUX_TEST_ERROR
839 dnl #
840 dnl # Generic error message which can be used when none of the expected
841 dnl # kernel interfaces were detected.
842 dnl #
843 AC_DEFUN([ZFS_LINUX_TEST_ERROR], [
844         AC_MSG_ERROR([
845         *** None of the expected "$1" interfaces were detected.
846         *** This may be because your kernel version is newer than what is
847         *** supported, or you are using a patched custom kernel with
848         *** incompatible modifications.
849         ***
850         *** ZFS Version: $ZFS_META_ALIAS
851         *** Compatible Kernels: $ZFS_META_KVER_MIN - $ZFS_META_KVER_MAX
852         ])
855 dnl #
856 dnl # ZFS_LINUX_TEST_RESULT_SYMBOL
857 dnl #
858 dnl # Like ZFS_LINUX_TEST_RESULT except ZFS_CHECK_SYMBOL_EXPORT is called to
859 dnl # verify symbol exports, unless --enable-linux-builtin was provided to
860 dnl # configure.
861 dnl #
862 AC_DEFUN([ZFS_LINUX_TEST_RESULT_SYMBOL], [
863         AS_IF([ ! test -f build/$1/$1.ko], [
864                 $5
865         ], [
866                 AS_IF([test "x$enable_linux_builtin" != "xyes"], [
867                         ZFS_CHECK_SYMBOL_EXPORT([$2], [$3], [$4], [$5])
868                 ], [
869                         $4
870                 ])
871         ])
874 dnl #
875 dnl # ZFS_LINUX_COMPILE_IFELSE
876 dnl #
877 AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [
878         ZFS_LINUX_TEST_REMOVE([conftest])
880         m4_ifvaln([$1], [ZFS_LINUX_CONFTEST_C([$1], [conftest])])
881         m4_ifvaln([$5], [ZFS_LINUX_CONFTEST_H([$5], [conftest])],
882             [ZFS_LINUX_CONFTEST_H([], [conftest])])
884         ZFS_LINUX_CONFTEST_MAKEFILE([conftest], [no],
885             [m4_ifvaln([$5], [-I$PWD/build/conftest], [])])
886         ZFS_LINUX_COMPILE([build/conftest], [$2], [$3], [$4], [], [])
889 dnl #
890 dnl # ZFS_LINUX_TRY_COMPILE
891 dnl #
892 dnl # $1 - global
893 dnl # $2 - source
894 dnl # $3 - run on success (valid .ko generated)
895 dnl # $4 - run on failure (unable to compile)
896 dnl #
897 dnl # When configuring as builtin (--enable-linux-builtin) for kernels
898 dnl # without loadable module support (CONFIG_MODULES=n) only the object
899 dnl # file is created.  See ZFS_LINUX_TEST_COMPILE_ALL for details.
900 dnl #
901 AC_DEFUN([ZFS_LINUX_TRY_COMPILE], [
902         AS_IF([test "x$enable_linux_builtin" = "xyes"], [
903                 ZFS_LINUX_COMPILE_IFELSE(
904                     [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]],
905                     [[ZFS_META_LICENSE]])],
906                     [test -f build/conftest/conftest.o], [$3], [$4])
907         ], [
908                 ZFS_LINUX_COMPILE_IFELSE(
909                     [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]],
910                     [[ZFS_META_LICENSE]])],
911                     [test -f build/conftest/conftest.ko], [$3], [$4])
912         ])
915 dnl #
916 dnl # ZFS_CHECK_SYMBOL_EXPORT
917 dnl #
918 dnl # Check if a symbol is exported on not by consulting the symbols
919 dnl # file, or optionally the source code.
920 dnl #
921 AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT], [
922         grep -q -E '[[[:space:]]]$1[[[:space:]]]' \
923                 $LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null
924         rc=$?
925         if test $rc -ne 0; then
926                 export=0
927                 for file in $2; do
928                         grep -q -E "EXPORT_SYMBOL.*($1)" \
929                                 "$LINUX/$file" 2>/dev/null
930                         rc=$?
931                         if test $rc -eq 0; then
932                                 export=1
933                                 break;
934                         fi
935                 done
936                 if test $export -eq 0; then :
937                         $4
938                 else :
939                         $3
940                 fi
941         else :
942                 $3
943         fi
946 dnl #
947 dnl # ZFS_LINUX_TRY_COMPILE_SYMBOL
948 dnl #
949 dnl # Like ZFS_LINUX_TRY_COMPILER except ZFS_CHECK_SYMBOL_EXPORT is called
950 dnl # to verify symbol exports, unless --enable-linux-builtin was provided
951 dnl # to configure.
952 dnl #
953 AC_DEFUN([ZFS_LINUX_TRY_COMPILE_SYMBOL], [
954         ZFS_LINUX_TRY_COMPILE([$1], [$2], [rc=0], [rc=1])
955         if test $rc -ne 0; then :
956                 $6
957         else
958                 if test "x$enable_linux_builtin" != xyes; then
959                         ZFS_CHECK_SYMBOL_EXPORT([$3], [$4], [rc=0], [rc=1])
960                 fi
961                 if test $rc -ne 0; then :
962                         $6
963                 else :
964                         $5
965                 fi
966         fi
969 dnl #
970 dnl # ZFS_LINUX_TRY_COMPILE_HEADER
971 dnl # like ZFS_LINUX_TRY_COMPILE, except the contents conftest.h are
972 dnl # provided via the fifth parameter
973 dnl #
974 AC_DEFUN([ZFS_LINUX_TRY_COMPILE_HEADER], [
975         AS_IF([test "x$enable_linux_builtin" = "xyes"], [
976                 ZFS_LINUX_COMPILE_IFELSE(
977                     [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]],
978                     [[ZFS_META_LICENSE]])],
979                     [test -f build/conftest/conftest.o], [$3], [$4], [$5])
980         ], [
981                 ZFS_LINUX_COMPILE_IFELSE(
982                     [ZFS_LINUX_TEST_PROGRAM([[$1]], [[$2]],
983                     [[ZFS_META_LICENSE]])],
984                     [test -f build/conftest/conftest.ko], [$3], [$4], [$5])
985         ])
988 dnl #
989 dnl # AS_VERSION_COMPARE_LE
990 dnl # like AS_VERSION_COMPARE_LE, but runs $3 if (and only if) $1 <= $2
991 dnl # AS_VERSION_COMPARE_LE (version-1, version-2, [action-if-less-or-equal], [action-if-greater])
992 dnl #
993 AC_DEFUN([AS_VERSION_COMPARE_LE], [
994         AS_VERSION_COMPARE([$1], [$2], [$3], [$3], [$4])
997 dnl #
998 dnl # ZFS_LINUX_REQUIRE_API
999 dnl # like ZFS_LINUX_TEST_ERROR, except only fails if the kernel is
1000 dnl # at least some specified version.
1001 dnl #
1002 AC_DEFUN([ZFS_LINUX_REQUIRE_API], [
1003         AS_VERSION_COMPARE_LE([$2], [$kernsrcver], [
1004                 AC_MSG_ERROR([
1005                 *** None of the expected "$1" interfaces were detected. This
1006                 *** interface is expected for kernels version "$2" and above.
1007                 *** This may be because your kernel version is newer than what is
1008                 *** supported, or you are using a patched custom kernel with
1009                 *** incompatible modifications.  Newer kernels may have incompatible
1010                 *** APIs.
1011                 ***
1012                 *** ZFS Version: $ZFS_META_ALIAS
1013                 *** Compatible Kernels: $ZFS_META_KVER_MIN - $ZFS_META_KVER_MAX
1014                 ])
1015         ], [
1016                 AC_MSG_RESULT(no)
1017         ])