1 /* Target signal numbers for GDB and the GDB remote protocol.
2 Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
3 1997, 1998, 1999, 2000, 2001, 2002
4 Free Software Foundation, Inc.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
26 /* The numbering of these signals is chosen to match traditional unix
27 signals (insofar as various unices use the same numbers, anyway).
28 It is also the numbering of the GDB remote protocol. Other remote
29 protocols, if they use a different numbering, should make sure to
30 translate appropriately.
32 Since these numbers have actually made it out into other software
33 (stubs, etc.), you mustn't disturb the assigned numbering. If you
34 need to add new signals here, add them to the end of the explicitly
35 numbered signals, at the comment marker. Add them unconditionally,
36 not within any #if or #ifdef.
38 This is based strongly on Unix/POSIX signals for several reasons:
39 (1) This set of signals represents a widely-accepted attempt to
40 represent events of this sort in a portable fashion, (2) we want a
41 signal to make it from wait to child_wait to the user intact, (3) many
42 remote protocols use a similar encoding. However, it is
43 recognized that this set of signals has limitations (such as not
44 distinguishing between various kinds of SIGSEGV, or not
45 distinguishing hitting a breakpoint from finishing a single step).
46 So in the future we may get around this either by adding additional
47 signals for breakpoint, single-step, etc., or by adding signal
48 codes; the latter seems more in the spirit of what BSD, System V,
49 etc. are doing to address these issues. */
51 /* For an explanation of what each signal means, see
52 target_signal_to_string. */
56 /* Used some places (e.g. stop_signal) to record the concept that
57 there is no signal. */
59 TARGET_SIGNAL_FIRST
= 0,
60 TARGET_SIGNAL_HUP
= 1,
61 TARGET_SIGNAL_INT
= 2,
62 TARGET_SIGNAL_QUIT
= 3,
63 TARGET_SIGNAL_ILL
= 4,
64 TARGET_SIGNAL_TRAP
= 5,
65 TARGET_SIGNAL_ABRT
= 6,
66 TARGET_SIGNAL_EMT
= 7,
67 TARGET_SIGNAL_FPE
= 8,
68 TARGET_SIGNAL_KILL
= 9,
69 TARGET_SIGNAL_BUS
= 10,
70 TARGET_SIGNAL_SEGV
= 11,
71 TARGET_SIGNAL_SYS
= 12,
72 TARGET_SIGNAL_PIPE
= 13,
73 TARGET_SIGNAL_ALRM
= 14,
74 TARGET_SIGNAL_TERM
= 15,
75 TARGET_SIGNAL_URG
= 16,
76 TARGET_SIGNAL_STOP
= 17,
77 TARGET_SIGNAL_TSTP
= 18,
78 TARGET_SIGNAL_CONT
= 19,
79 TARGET_SIGNAL_CHLD
= 20,
80 TARGET_SIGNAL_TTIN
= 21,
81 TARGET_SIGNAL_TTOU
= 22,
82 TARGET_SIGNAL_IO
= 23,
83 TARGET_SIGNAL_XCPU
= 24,
84 TARGET_SIGNAL_XFSZ
= 25,
85 TARGET_SIGNAL_VTALRM
= 26,
86 TARGET_SIGNAL_PROF
= 27,
87 TARGET_SIGNAL_WINCH
= 28,
88 TARGET_SIGNAL_LOST
= 29,
89 TARGET_SIGNAL_USR1
= 30,
90 TARGET_SIGNAL_USR2
= 31,
91 TARGET_SIGNAL_PWR
= 32,
92 /* Similar to SIGIO. Perhaps they should have the same number. */
93 TARGET_SIGNAL_POLL
= 33,
94 TARGET_SIGNAL_WIND
= 34,
95 TARGET_SIGNAL_PHONE
= 35,
96 TARGET_SIGNAL_WAITING
= 36,
97 TARGET_SIGNAL_LWP
= 37,
98 TARGET_SIGNAL_DANGER
= 38,
99 TARGET_SIGNAL_GRANT
= 39,
100 TARGET_SIGNAL_RETRACT
= 40,
101 TARGET_SIGNAL_MSG
= 41,
102 TARGET_SIGNAL_SOUND
= 42,
103 TARGET_SIGNAL_SAK
= 43,
104 TARGET_SIGNAL_PRIO
= 44,
105 TARGET_SIGNAL_REALTIME_33
= 45,
106 TARGET_SIGNAL_REALTIME_34
= 46,
107 TARGET_SIGNAL_REALTIME_35
= 47,
108 TARGET_SIGNAL_REALTIME_36
= 48,
109 TARGET_SIGNAL_REALTIME_37
= 49,
110 TARGET_SIGNAL_REALTIME_38
= 50,
111 TARGET_SIGNAL_REALTIME_39
= 51,
112 TARGET_SIGNAL_REALTIME_40
= 52,
113 TARGET_SIGNAL_REALTIME_41
= 53,
114 TARGET_SIGNAL_REALTIME_42
= 54,
115 TARGET_SIGNAL_REALTIME_43
= 55,
116 TARGET_SIGNAL_REALTIME_44
= 56,
117 TARGET_SIGNAL_REALTIME_45
= 57,
118 TARGET_SIGNAL_REALTIME_46
= 58,
119 TARGET_SIGNAL_REALTIME_47
= 59,
120 TARGET_SIGNAL_REALTIME_48
= 60,
121 TARGET_SIGNAL_REALTIME_49
= 61,
122 TARGET_SIGNAL_REALTIME_50
= 62,
123 TARGET_SIGNAL_REALTIME_51
= 63,
124 TARGET_SIGNAL_REALTIME_52
= 64,
125 TARGET_SIGNAL_REALTIME_53
= 65,
126 TARGET_SIGNAL_REALTIME_54
= 66,
127 TARGET_SIGNAL_REALTIME_55
= 67,
128 TARGET_SIGNAL_REALTIME_56
= 68,
129 TARGET_SIGNAL_REALTIME_57
= 69,
130 TARGET_SIGNAL_REALTIME_58
= 70,
131 TARGET_SIGNAL_REALTIME_59
= 71,
132 TARGET_SIGNAL_REALTIME_60
= 72,
133 TARGET_SIGNAL_REALTIME_61
= 73,
134 TARGET_SIGNAL_REALTIME_62
= 74,
135 TARGET_SIGNAL_REALTIME_63
= 75,
137 /* Used internally by Solaris threads. See signal(5) on Solaris. */
138 TARGET_SIGNAL_CANCEL
= 76,
140 /* Yes, this pains me, too. But LynxOS didn't have SIG32, and now
141 GNU/Linux does, and we can't disturb the numbering, since it's
142 part of the remote protocol. Note that in some GDB's
143 TARGET_SIGNAL_REALTIME_32 is number 76. */
144 TARGET_SIGNAL_REALTIME_32
,
145 /* Yet another pain, IRIX 6 has SIG64. */
146 TARGET_SIGNAL_REALTIME_64
,
147 /* Yet another pain, GNU/Linux MIPS might go up to 128. */
148 TARGET_SIGNAL_REALTIME_65
,
149 TARGET_SIGNAL_REALTIME_66
,
150 TARGET_SIGNAL_REALTIME_67
,
151 TARGET_SIGNAL_REALTIME_68
,
152 TARGET_SIGNAL_REALTIME_69
,
153 TARGET_SIGNAL_REALTIME_70
,
154 TARGET_SIGNAL_REALTIME_71
,
155 TARGET_SIGNAL_REALTIME_72
,
156 TARGET_SIGNAL_REALTIME_73
,
157 TARGET_SIGNAL_REALTIME_74
,
158 TARGET_SIGNAL_REALTIME_75
,
159 TARGET_SIGNAL_REALTIME_76
,
160 TARGET_SIGNAL_REALTIME_77
,
161 TARGET_SIGNAL_REALTIME_78
,
162 TARGET_SIGNAL_REALTIME_79
,
163 TARGET_SIGNAL_REALTIME_80
,
164 TARGET_SIGNAL_REALTIME_81
,
165 TARGET_SIGNAL_REALTIME_82
,
166 TARGET_SIGNAL_REALTIME_83
,
167 TARGET_SIGNAL_REALTIME_84
,
168 TARGET_SIGNAL_REALTIME_85
,
169 TARGET_SIGNAL_REALTIME_86
,
170 TARGET_SIGNAL_REALTIME_87
,
171 TARGET_SIGNAL_REALTIME_88
,
172 TARGET_SIGNAL_REALTIME_89
,
173 TARGET_SIGNAL_REALTIME_90
,
174 TARGET_SIGNAL_REALTIME_91
,
175 TARGET_SIGNAL_REALTIME_92
,
176 TARGET_SIGNAL_REALTIME_93
,
177 TARGET_SIGNAL_REALTIME_94
,
178 TARGET_SIGNAL_REALTIME_95
,
179 TARGET_SIGNAL_REALTIME_96
,
180 TARGET_SIGNAL_REALTIME_97
,
181 TARGET_SIGNAL_REALTIME_98
,
182 TARGET_SIGNAL_REALTIME_99
,
183 TARGET_SIGNAL_REALTIME_100
,
184 TARGET_SIGNAL_REALTIME_101
,
185 TARGET_SIGNAL_REALTIME_102
,
186 TARGET_SIGNAL_REALTIME_103
,
187 TARGET_SIGNAL_REALTIME_104
,
188 TARGET_SIGNAL_REALTIME_105
,
189 TARGET_SIGNAL_REALTIME_106
,
190 TARGET_SIGNAL_REALTIME_107
,
191 TARGET_SIGNAL_REALTIME_108
,
192 TARGET_SIGNAL_REALTIME_109
,
193 TARGET_SIGNAL_REALTIME_110
,
194 TARGET_SIGNAL_REALTIME_111
,
195 TARGET_SIGNAL_REALTIME_112
,
196 TARGET_SIGNAL_REALTIME_113
,
197 TARGET_SIGNAL_REALTIME_114
,
198 TARGET_SIGNAL_REALTIME_115
,
199 TARGET_SIGNAL_REALTIME_116
,
200 TARGET_SIGNAL_REALTIME_117
,
201 TARGET_SIGNAL_REALTIME_118
,
202 TARGET_SIGNAL_REALTIME_119
,
203 TARGET_SIGNAL_REALTIME_120
,
204 TARGET_SIGNAL_REALTIME_121
,
205 TARGET_SIGNAL_REALTIME_122
,
206 TARGET_SIGNAL_REALTIME_123
,
207 TARGET_SIGNAL_REALTIME_124
,
208 TARGET_SIGNAL_REALTIME_125
,
209 TARGET_SIGNAL_REALTIME_126
,
210 TARGET_SIGNAL_REALTIME_127
,
214 /* Some signal we don't know about. */
215 TARGET_SIGNAL_UNKNOWN
,
217 /* Use whatever signal we use when one is not specifically specified
218 (for passing to proceed and so on). */
219 TARGET_SIGNAL_DEFAULT
,
221 /* Mach exceptions. In versions of GDB before 5.2, these were just before
222 TARGET_SIGNAL_INFO if you were compiling on a Mach host (and missing
224 TARGET_EXC_BAD_ACCESS
,
225 TARGET_EXC_BAD_INSTRUCTION
,
226 TARGET_EXC_ARITHMETIC
,
227 TARGET_EXC_EMULATION
,
229 TARGET_EXC_BREAKPOINT
,
231 /* If you are adding a new signal, add it just above this comment. */
233 /* Last and unused enum value, for sizing arrays, etc. */
237 #endif /* #ifndef GDB_SIGNALS_H */