include/svx/lathe3d.hxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #ifndef INCLUDED_SVX_LATHE3D_HXX
  21 #define INCLUDED_SVX_LATHE3D_HXX
  22
  23 #include <svx/obj3d.hxx>
  24 #include <svx/svxdllapi.h>
  25
  26 /*************************************************************************
  27 |*
  28 |* Create a 3D rotation object from a passed 2D polygon
  29 |*
  30 |* The aPolyPoly3D is rotated around its axis in nHSegments steps.
  31 |* nVSegments contains the number of lines of aPolyPoly3D and therefore
  32 |* is effectively a vertical segmentation.
  33 |*
  34 \************************************************************************/
  35
  36 class SVX_DLLPUBLIC E3dLatheObj : public E3dCompoundObject
  37 {
  38 private:
  39     // Part codes for Wireframe generation: standard oder cover surface
  40     enum { LATHE_PART_STD = 1, LATHE_PART_COVER = 2 };
  41     basegfx::B2DPolyPolygon maPolyPoly2D;
  42
  43  protected:
  44     virtual sdr::contact::ViewContact* CreateObjectSpecificViewContact() SAL_OVERRIDE;
  45     virtual sdr::properties::BaseProperties* CreateObjectSpecificProperties() SAL_OVERRIDE;
  46     void SetDefaultAttributes(E3dDefaultAttributes& rDefault);
  47
  48  public:
  49     TYPEINFO_OVERRIDE();
  50     E3dLatheObj(E3dDefaultAttributes& rDefault, const basegfx::B2DPolyPolygon& rPoly2D);
  51     E3dLatheObj();
  52
  53     // HorizontalSegments:
  54     sal_uInt32 GetHorizontalSegments() const
  55         { return static_cast<const SfxUInt32Item&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_HORZ_SEGS)).GetValue(); }
  56
  57     // VerticalSegments:
  58     sal_uInt32 GetVerticalSegments() const
  59         { return static_cast<const SfxUInt32Item&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_VERT_SEGS)).GetValue(); }
  60
  61     // PercentDiagonal: 0..100, before 0.0..0.5
  62     sal_uInt16 GetPercentDiagonal() const
  63         { return static_cast<const SfxUInt16Item&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_PERCENT_DIAGONAL)).GetValue(); }
  64
  65     // BackScale: 0..100, before 0.0..1.0
  66     sal_uInt16 GetBackScale() const
  67         { return static_cast<const SfxUInt16Item&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_BACKSCALE)).GetValue(); }
  68
  69     // EndAngle: 0..10000
  70     sal_uInt32 GetEndAngle() const
  71         { return static_cast<const SfxUInt32Item&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_END_ANGLE)).GetValue(); }
  72
  73     // #107245# GetSmoothNormals() for bLatheSmoothed
  74     bool GetSmoothNormals() const
  75         { return static_cast<const Svx3DSmoothNormalsItem&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_SMOOTH_NORMALS)).GetValue(); }
  76
  77     // #107245# GetSmoothLids() for bLatheSmoothFrontBack
  78     bool GetSmoothLids() const
  79         { return static_cast<const Svx3DSmoothLidsItem&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_SMOOTH_LIDS)).GetValue(); }
  80
  81     // #107245# GetCharacterMode() for bLatheCharacterMode
  82     bool GetCharacterMode() const
  83         { return static_cast<const Svx3DCharacterModeItem&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_CHARACTER_MODE)).GetValue(); }
  84
  85     // #107245# GetCloseFront() for bLatheCloseFront
  86     bool GetCloseFront() const
  87         { return static_cast<const Svx3DCloseFrontItem&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_CLOSE_FRONT)).GetValue(); }
  88
  89     // #107245# GetCloseBack() for bLatheCloseBack
  90     bool GetCloseBack() const
  91         { return static_cast<const Svx3DCloseBackItem&>(GetObjectItemSet().Get(SDRATTR_3DOBJ_CLOSE_BACK)).GetValue(); }
  92
  93     virtual sal_uInt16 GetObjIdentifier() const SAL_OVERRIDE;
  94
  95     virtual E3dLatheObj* Clone() const SAL_OVERRIDE;
  96
  97     virtual SdrObject* DoConvertToPolyObj(bool bBezier, bool bAddText) const SAL_OVERRIDE;
  98
  99     // TakeObjName...() is for the display in the UI, for example "3 frames selected".
 100     virtual OUString TakeObjNameSingul() const SAL_OVERRIDE;
 101     virtual OUString TakeObjNamePlural() const SAL_OVERRIDE;
 102
 103     // set/get local parameters with geometry recreation
 104     void SetPolyPoly2D(const basegfx::B2DPolyPolygon& rNew);
 105     const basegfx::B2DPolyPolygon& GetPolyPoly2D() const { return maPolyPoly2D; }
 106
 107     // break up
 108     virtual bool IsBreakObjPossible() SAL_OVERRIDE;
 109     virtual SdrAttrObj* GetBreakObj() SAL_OVERRIDE;
 110 };
 111
 112 #endif // INCLUDED_SVX_LATHE3D_HXX
 113
 114 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */