Don't handle non-MSP characters on VTX MSP port (#14091)
[betaflight.git] / src / main / telemetry / ltm.c
blob733477b3ec61ac11f13df18b1014ec8a8e59ab08
1 /*
2 * This file is part of Cleanflight and Betaflight.
4 * Cleanflight and Betaflight are free software. You can redistribute
5 * this software and/or modify this software under the terms of the
6 * GNU General Public License as published by the Free Software
7 * Foundation, either version 3 of the License, or (at your option)
8 * any later version.
10 * Cleanflight and Betaflight are distributed in the hope that they
11 * will be useful, but WITHOUT ANY WARRANTY; without even the implied
12 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
13 * See the GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this software.
18 * If not, see <http://www.gnu.org/licenses/>.
22 * LightTelemetry from KipK
24 * Minimal one way telemetry protocol for really bitrates (1200/2400 bauds).
25 * Effective for ground OSD, groundstation HUD and Antenna tracker
26 * http://www.wedontneednasa.com/2014/02/lighttelemetry-v2-en-route-to-ground-osd.html
28 * This implementation is for LTM v2 > 2400 baud rates
30 * Cleanflight implementation by Jonathan Hudson
33 #include <stdbool.h>
34 #include <stdint.h>
35 #include <string.h>
37 #include "platform.h"
39 #ifdef USE_TELEMETRY_LTM
41 #include "build/build_config.h"
43 #include "common/maths.h"
44 #include "common/axis.h"
45 #include "common/color.h"
46 #include "common/utils.h"
48 #include "drivers/time.h"
49 #include "drivers/sensor.h"
50 #include "drivers/accgyro/accgyro.h"
52 #include "config/config.h"
53 #include "fc/rc_controls.h"
54 #include "fc/runtime_config.h"
56 #include "sensors/sensors.h"
57 #include "sensors/acceleration.h"
58 #include "sensors/gyro.h"
59 #include "sensors/barometer.h"
60 #include "sensors/boardalignment.h"
61 #include "sensors/battery.h"
63 #include "io/serial.h"
64 #include "io/gimbal.h"
65 #include "io/gps.h"
66 #include "io/ledstrip.h"
67 #include "io/beeper.h"
69 #include "pg/rx.h"
71 #include "rx/rx.h"
73 #include "flight/mixer.h"
74 #include "flight/pid.h"
75 #include "flight/imu.h"
76 #include "flight/failsafe.h"
77 #include "flight/position.h"
79 #include "telemetry/telemetry.h"
80 #include "telemetry/ltm.h"
82 #define TELEMETRY_LTM_INITIAL_PORT_MODE MODE_TX
83 #define LTM_CYCLETIME 100
85 static serialPort_t *ltmPort;
86 static const serialPortConfig_t *portConfig;
87 static bool ltmEnabled;
88 static portSharing_e ltmPortSharing;
89 static uint8_t ltm_crc;
91 static void ltm_initialise_packet(uint8_t ltm_id)
93 ltm_crc = 0;
94 serialWrite(ltmPort, '$');
95 serialWrite(ltmPort, 'T');
96 serialWrite(ltmPort, ltm_id);
99 static void ltm_serialise_8(uint8_t v)
101 serialWrite(ltmPort, v);
102 ltm_crc ^= v;
105 static void ltm_serialise_16(uint16_t v)
107 ltm_serialise_8((uint8_t)v);
108 ltm_serialise_8((v >> 8));
111 static void ltm_serialise_32(uint32_t v)
113 ltm_serialise_8((uint8_t)v);
114 ltm_serialise_8((v >> 8));
115 ltm_serialise_8((v >> 16));
116 ltm_serialise_8((v >> 24));
119 static void ltm_finalise(void)
121 serialWrite(ltmPort, ltm_crc);
125 * GPS G-frame 5Hhz at > 2400 baud
126 * LAT LON SPD ALT SAT/FIX
128 static void ltm_gframe(void)
130 #if defined(USE_GPS)
131 uint8_t gps_fix_type = 0;
132 int32_t ltm_alt;
134 if (!sensors(SENSOR_GPS))
135 return;
137 if (!STATE(GPS_FIX))
138 gps_fix_type = 1;
139 else if (gpsSol.numSat < GPS_MIN_SAT_COUNT)
140 gps_fix_type = 2;
141 else
142 gps_fix_type = 3;
144 ltm_initialise_packet('G');
145 ltm_serialise_32(gpsSol.llh.lat);
146 ltm_serialise_32(gpsSol.llh.lon);
147 ltm_serialise_8((uint8_t)(gpsSol.groundSpeed / 100));
148 ltm_alt = getEstimatedAltitudeCm();
149 ltm_serialise_32(ltm_alt);
150 ltm_serialise_8((gpsSol.numSat << 2) | gps_fix_type);
151 ltm_finalise();
152 #endif
156 * Sensors S-frame 5Hhz at > 2400 baud
157 * VBAT(mv) Current(ma) RSSI AIRSPEED ARM/FS/FMOD
158 * Flight mode(0-19):
159 * 0: Manual, 1: Rate, 2: Attitude/Angle, 3: Horizon,
160 * 4: Acro, 5: Stabilized1, 6: Stabilized2, 7: Stabilized3,
161 * 8: Altitude Hold, 9: Loiter/GPS Hold, 10: Auto/Waypoints,
162 * 11: Heading Hold / headFree, 12: Circle, 13: RTH, 14: FollowMe,
163 * 15: LAND, 16:FlybyWireA, 17: FlybywireB, 18: Cruise, 19: Unknown
166 static void ltm_sframe(void)
168 uint8_t lt_flightmode;
169 uint8_t lt_statemode;
170 if (FLIGHT_MODE(PASSTHRU_MODE))
171 lt_flightmode = 0;
172 else if (FLIGHT_MODE(HEADFREE_MODE))
173 lt_flightmode = 4;
174 else if (FLIGHT_MODE(ANGLE_MODE))
175 lt_flightmode = 2;
176 else if (FLIGHT_MODE(HORIZON_MODE))
177 lt_flightmode = 3;
178 else if (FLIGHT_MODE(ALT_HOLD_MODE))
179 lt_flightmode = 8;
180 else if (FLIGHT_MODE(POS_HOLD_MODE))
181 lt_flightmode = 9;
182 else if (FLIGHT_MODE(GPS_RESCUE_MODE))
183 lt_flightmode = 13;
184 else
185 lt_flightmode = 1; // Rate mode
187 lt_statemode = (ARMING_FLAG(ARMED)) ? 1 : 0;
188 if (failsafeIsActive())
189 lt_statemode |= 2;
190 ltm_initialise_packet('S');
191 ltm_serialise_16(getBatteryVoltage() * 10); // vbat converted to mV
192 ltm_serialise_16((uint16_t)constrain(getMAhDrawn(), 0, UINT16_MAX)); // consumption in mAh (65535 mAh max)
193 ltm_serialise_8(constrain(scaleRange(getRssi(), 0, RSSI_MAX_VALUE, 0, 255), 0, 255)); // scaled RSSI (uchar)
194 ltm_serialise_8(0); // no airspeed
195 ltm_serialise_8((lt_flightmode << 2) | lt_statemode);
196 ltm_finalise();
200 * Attitude A-frame - 10 Hz at > 2400 baud
201 * PITCH ROLL HEADING
203 static void ltm_aframe(void)
205 ltm_initialise_packet('A');
206 ltm_serialise_16(DECIDEGREES_TO_DEGREES(attitude.values.pitch));
207 ltm_serialise_16(DECIDEGREES_TO_DEGREES(attitude.values.roll));
208 ltm_serialise_16(DECIDEGREES_TO_DEGREES(attitude.values.yaw));
209 ltm_finalise();
213 * OSD additional data frame, 1 Hz rate
214 * This frame will be ignored by Ghettostation, but processed by GhettOSD if it is used as standalone onboard OSD
215 * home pos, home alt, direction to home
217 static void ltm_oframe(void)
219 ltm_initialise_packet('O');
220 #if defined(USE_GPS)
221 ltm_serialise_32(GPS_home_llh.lat);
222 ltm_serialise_32(GPS_home_llh.lon);
223 #else
224 ltm_serialise_32(0);
225 ltm_serialise_32(0);
226 #endif
227 ltm_serialise_32(0); // Don't have GPS home altitude
228 ltm_serialise_8(1); // OSD always ON
229 ltm_serialise_8(STATE(GPS_FIX_HOME) ? 1 : 0);
230 ltm_finalise();
233 static void process_ltm(void)
235 static uint8_t ltm_scheduler;
236 ltm_aframe();
237 if (ltm_scheduler & 1)
238 ltm_gframe();
239 else
240 ltm_sframe();
241 if (ltm_scheduler == 0)
242 ltm_oframe();
243 ltm_scheduler++;
244 ltm_scheduler %= 10;
247 void handleLtmTelemetry(void)
249 static uint32_t ltm_lastCycleTime;
250 uint32_t now;
251 if (!ltmEnabled)
252 return;
253 if (!ltmPort)
254 return;
255 now = millis();
256 if ((now - ltm_lastCycleTime) >= LTM_CYCLETIME) {
257 process_ltm();
258 ltm_lastCycleTime = now;
262 void freeLtmTelemetryPort(void)
264 closeSerialPort(ltmPort);
265 ltmPort = NULL;
266 ltmEnabled = false;
269 void initLtmTelemetry(void)
271 portConfig = findSerialPortConfig(FUNCTION_TELEMETRY_LTM);
272 ltmPortSharing = determinePortSharing(portConfig, FUNCTION_TELEMETRY_LTM);
275 void configureLtmTelemetryPort(void)
277 if (!portConfig) {
278 return;
280 baudRate_e baudRateIndex = portConfig->telemetry_baudrateIndex;
281 if (baudRateIndex == BAUD_AUTO) {
282 baudRateIndex = BAUD_19200;
284 ltmPort = openSerialPort(portConfig->identifier, FUNCTION_TELEMETRY_LTM, NULL, NULL, baudRates[baudRateIndex], TELEMETRY_LTM_INITIAL_PORT_MODE, telemetryConfig()->telemetry_inverted ? SERIAL_INVERTED : SERIAL_NOT_INVERTED);
285 if (!ltmPort)
286 return;
287 ltmEnabled = true;
290 void checkLtmTelemetryState(void)
292 if (portConfig && telemetryCheckRxPortShared(portConfig, rxRuntimeState.serialrxProvider)) {
293 if (!ltmEnabled && telemetrySharedPort != NULL) {
294 ltmPort = telemetrySharedPort;
295 ltmEnabled = true;
297 } else {
298 bool newTelemetryEnabledValue = telemetryDetermineEnabledState(ltmPortSharing);
299 if (newTelemetryEnabledValue == ltmEnabled)
300 return;
301 if (newTelemetryEnabledValue)
302 configureLtmTelemetryPort();
303 else
304 freeLtmTelemetryPort();
307 #endif