bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2021 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 #include "bfdver.h"
  54
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  Note - the value 2 is used so that it
  70 .     will not be mistaken for the boolean TRUE or FALSE values.  *}
  71 .  bfd_reloc_ok = 2,
  72 .
  73 .  {* The relocation was performed, but there was an overflow.  *}
  74 .  bfd_reloc_overflow,
  75 .
  76 .  {* The address to relocate was not within the section supplied.  *}
  77 .  bfd_reloc_outofrange,
  78 .
  79 .  {* Used by special functions.  *}
  80 .  bfd_reloc_continue,
  81 .
  82 .  {* Unsupported relocation size requested.  *}
  83 .  bfd_reloc_notsupported,
  84 .
  85 .  {* Unused.  *}
  86 .  bfd_reloc_other,
  87 .
  88 .  {* The symbol to relocate against was undefined.  *}
  89 .  bfd_reloc_undefined,
  90 .
  91 .  {* The relocation was performed, but may not be ok.  If this type is
  92 .     returned, the error_message argument to bfd_perform_relocation
  93 .     will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .typedef const struct reloc_howto_struct reloc_howto_type;
  99 .
 100 .typedef struct reloc_cache_entry
 101 .{
 102 .  {* A pointer into the canonical table of pointers.  *}
 103 .  struct bfd_symbol **sym_ptr_ptr;
 104 .
 105 .  {* offset in section.  *}
 106 .  bfd_size_type address;
 107 .
 108 .  {* addend for relocation value.  *}
 109 .  bfd_vma addend;
 110 .
 111 .  {* Pointer to how to perform the required relocation.  *}
 112 .  reloc_howto_type *howto;
 113 .
 114 .}
 115 .arelent;
 116 .
 117 */
 118
 119 /*
 120 DESCRIPTION
 121
 122         Here is a description of each of the fields within an <<arelent>>:
 123
 124         o <<sym_ptr_ptr>>
 125
 126         The symbol table pointer points to a pointer to the symbol
 127         associated with the relocation request.  It is the pointer
 128         into the table returned by the back end's
 129         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 130         referenced through a pointer to a pointer so that tools like
 131         the linker can fix up all the symbols of the same name by
 132         modifying only one pointer. The relocation routine looks in
 133         the symbol and uses the base of the section the symbol is
 134         attached to and the value of the symbol as the initial
 135         relocation offset. If the symbol pointer is zero, then the
 136         section provided is looked up.
 137
 138         o <<address>>
 139
 140         The <<address>> field gives the offset in bytes from the base of
 141         the section data which owns the relocation record to the first
 142         byte of relocatable information. The actual data relocated
 143         will be relative to this point; for example, a relocation
 144         type which modifies the bottom two bytes of a four byte word
 145         would not touch the first byte pointed to in a big endian
 146         world.
 147
 148         o <<addend>>
 149
 150         The <<addend>> is a value provided by the back end to be added (!)
 151         to the relocation offset. Its interpretation is dependent upon
 152         the howto. For example, on the 68k the code:
 153
 154 |        char foo[];
 155 |        main()
 156 |                {
 157 |                return foo[0x12345678];
 158 |                }
 159
 160         Could be compiled into:
 161
 162 |        linkw fp,#-4
 163 |        moveb @@#12345678,d0
 164 |        extbl d0
 165 |        unlk fp
 166 |        rts
 167
 168         This could create a reloc pointing to <<foo>>, but leave the
 169         offset in the data, something like:
 170
 171 |RELOCATION RECORDS FOR [.text]:
 172 |offset   type      value
 173 |00000006 32        _foo
 174 |
 175 |00000000 4e56 fffc          ; linkw fp,#-4
 176 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 177 |0000000a 49c0               ; extbl d0
 178 |0000000c 4e5e               ; unlk fp
 179 |0000000e 4e75               ; rts
 180
 181         Using coff and an 88k, some instructions don't have enough
 182         space in them to represent the full address range, and
 183         pointers have to be loaded in two parts. So you'd get something like:
 184
 185 |        or.u     r13,r0,hi16(_foo+0x12345678)
 186 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 187 |        jmp      r1
 188
 189         This should create two relocs, both pointing to <<_foo>>, and with
 190         0x12340000 in their addend field. The data would consist of:
 191
 192 |RELOCATION RECORDS FOR [.text]:
 193 |offset   type      value
 194 |00000002 HVRT16    _foo+0x12340000
 195 |00000006 LVRT16    _foo+0x12340000
 196 |
 197 |00000000 5da05678           ; or.u r13,r0,0x5678
 198 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 199 |00000008 f400c001           ; jmp r1
 200
 201         The relocation routine digs out the value from the data, adds
 202         it to the addend to get the original offset, and then adds the
 203         value of <<_foo>>. Note that all 32 bits have to be kept around
 204         somewhere, to cope with carry from bit 15 to bit 16.
 205
 206         One further example is the sparc and the a.out format. The
 207         sparc has a similar problem to the 88k, in that some
 208         instructions don't have room for an entire offset, but on the
 209         sparc the parts are created in odd sized lumps. The designers of
 210         the a.out format chose to not use the data within the section
 211         for storing part of the offset; all the offset is kept within
 212         the reloc. Anything in the data should be ignored.
 213
 214 |        save %sp,-112,%sp
 215 |        sethi %hi(_foo+0x12345678),%g2
 216 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 217 |        ret
 218 |        restore
 219
 220         Both relocs contain a pointer to <<foo>>, and the offsets
 221         contain junk.
 222
 223 |RELOCATION RECORDS FOR [.text]:
 224 |offset   type      value
 225 |00000004 HI22      _foo+0x12345678
 226 |00000008 LO10      _foo+0x12345678
 227 |
 228 |00000000 9de3bf90     ; save %sp,-112,%sp
 229 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 230 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 231 |0000000c 81c7e008     ; ret
 232 |00000010 81e80000     ; restore
 233
 234         o <<howto>>
 235
 236         The <<howto>> field can be imagined as a
 237         relocation instruction. It is a pointer to a structure which
 238         contains information on what to do with all of the other
 239         information in the reloc record and data section. A back end
 240         would normally have a relocation instruction set and turn
 241         relocations into pointers to the correct structure on input -
 242         but it would be possible to create each howto field on demand.
 243
 244 */
 245
 246 /*
 247 SUBSUBSECTION
 248         <<enum complain_overflow>>
 249
 250         Indicates what sort of overflow checking should be done when
 251         performing a relocation.
 252
 253 CODE_FRAGMENT
 254 .
 255 .enum complain_overflow
 256 .{
 257 .  {* Do not complain on overflow.  *}
 258 .  complain_overflow_dont,
 259 .
 260 .  {* Complain if the value overflows when considered as a signed
 261 .     number one bit larger than the field.  ie. A bitfield of N bits
 262 .     is allowed to represent -2**n to 2**n-1.  *}
 263 .  complain_overflow_bitfield,
 264 .
 265 .  {* Complain if the value overflows when considered as a signed
 266 .     number.  *}
 267 .  complain_overflow_signed,
 268 .
 269 .  {* Complain if the value overflows when considered as an
 270 .     unsigned number.  *}
 271 .  complain_overflow_unsigned
 272 .};
 273
 274 */
 275
 276 /*
 277 SUBSUBSECTION
 278         <<reloc_howto_type>>
 279
 280         The <<reloc_howto_type>> is a structure which contains all the
 281         information that libbfd needs to know to tie up a back end's data.
 282
 283 CODE_FRAGMENT
 284 .struct reloc_howto_struct
 285 .{
 286 .  {* The type field has mainly a documentary use - the back end can
 287 .     do what it wants with it, though normally the back end's idea of
 288 .     an external reloc number is stored in this field.  *}
 289 .  unsigned int type;
 290 .
 291 .  {* The encoded size of the item to be relocated.  This is *not* a
 292 .     power-of-two measure.  Use bfd_get_reloc_size to find the size
 293 .     of the item in bytes.  *}
 294 .  unsigned int size:3;
 295 .
 296 .  {* The number of bits in the field to be relocated.  This is used
 297 .     when doing overflow checking.  *}
 298 .  unsigned int bitsize:7;
 299 .
 300 .  {* The value the final relocation is shifted right by.  This drops
 301 .     unwanted data from the relocation.  *}
 302 .  unsigned int rightshift:6;
 303 .
 304 .  {* The bit position of the reloc value in the destination.
 305 .     The relocated value is left shifted by this amount.  *}
 306 .  unsigned int bitpos:6;
 307 .
 308 .  {* What type of overflow error should be checked for when
 309 .     relocating.  *}
 310 .  ENUM_BITFIELD (complain_overflow) complain_on_overflow:2;
 311 .
 312 .  {* The relocation value should be negated before applying.  *}
 313 .  unsigned int negate:1;
 314 .
 315 .  {* The relocation is relative to the item being relocated.  *}
 316 .  unsigned int pc_relative:1;
 317 .
 318 .  {* Some formats record a relocation addend in the section contents
 319 .     rather than with the relocation.  For ELF formats this is the
 320 .     distinction between USE_REL and USE_RELA (though the code checks
 321 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 322 .     addend is recorded with the section contents; when performing a
 323 .     partial link (ld -r) the section contents (the data) will be
 324 .     modified.  The value of this field is FALSE if addends are
 325 .     recorded with the relocation (in arelent.addend); when performing
 326 .     a partial link the relocation will be modified.
 327 .     All relocations for all ELF USE_RELA targets should set this field
 328 .     to FALSE (values of TRUE should be looked on with suspicion).
 329 .     However, the converse is not true: not all relocations of all ELF
 330 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 331 .     to each particular target.  For relocs that aren't used in partial
 332 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 333 .  unsigned int partial_inplace:1;
 334 .
 335 .  {* When some formats create PC relative instructions, they leave
 336 .     the value of the pc of the place being relocated in the offset
 337 .     slot of the instruction, so that a PC relative relocation can
 338 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 339 .     Some formats leave the displacement part of an instruction
 340 .     empty (e.g., ELF); this flag signals the fact.  *}
 341 .  unsigned int pcrel_offset:1;
 342 .
 343 .  {* src_mask selects the part of the instruction (or data) to be used
 344 .     in the relocation sum.  If the target relocations don't have an
 345 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 346 .     dst_mask to extract the addend from the section contents.  If
 347 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 348 .     field should normally be zero.  Non-zero values for ELF USE_RELA
 349 .     targets should be viewed with suspicion as normally the value in
 350 .     the dst_mask part of the section contents should be ignored.  *}
 351 .  bfd_vma src_mask;
 352 .
 353 .  {* dst_mask selects which parts of the instruction (or data) are
 354 .     replaced with a relocated value.  *}
 355 .  bfd_vma dst_mask;
 356 .
 357 .  {* If this field is non null, then the supplied function is
 358 .     called rather than the normal function.  This allows really
 359 .     strange relocation methods to be accommodated.  *}
 360 .  bfd_reloc_status_type (*special_function)
 361 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 362 .     bfd *, char **);
 363 .
 364 .  {* The textual name of the relocation type.  *}
 365 .  const char *name;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO macro fills in a reloc_howto_type (a typedef for
 376         const struct reloc_howto_struct).
 377
 378 .#define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name,   \
 379 .              inplace, src_mask, dst_mask, pcrel_off)                  \
 380 .  { (unsigned) type, size < 0 ? -size : size, bits, right, left, ovf,  \
 381 .    size < 0, pcrel, inplace, pcrel_off, src_mask, dst_mask, func, name }
 382
 383 DESCRIPTION
 384         This is used to fill in an empty howto entry in an array.
 385
 386 .#define EMPTY_HOWTO(C) \
 387 .  HOWTO ((C), 0, 0, 0, false, 0, complain_overflow_dont, NULL, \
 388 .         NULL, false, 0, 0, false)
 389 .
 390 */
 391
 392 /*
 393 FUNCTION
 394         bfd_get_reloc_size
 395
 396 SYNOPSIS
 397         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 398
 399 DESCRIPTION
 400         For a reloc_howto_type that operates on a fixed number of bytes,
 401         this returns the number of bytes operated on.
 402  */
 403
 404 unsigned int
 405 bfd_get_reloc_size (reloc_howto_type *howto)
 406 {
 407   switch (howto->size)
 408     {
 409     case 0: return 1;
 410     case 1: return 2;
 411     case 2: return 4;
 412     case 3: return 0;
 413     case 4: return 8;
 414     case 5: return 3;
 415     default: abort ();
 416     }
 417 }
 418
 419 /*
 420 TYPEDEF
 421         arelent_chain
 422
 423 DESCRIPTION
 424
 425         How relocs are tied together in an <<asection>>:
 426
 427 .typedef struct relent_chain
 428 .{
 429 .  arelent relent;
 430 .  struct relent_chain *next;
 431 .}
 432 .arelent_chain;
 433 .
 434 */
 435
 436 /* N_ONES produces N one bits, without undefined behaviour for N
 437    between zero and the number of bits in a bfd_vma.  */
 438 #define N_ONES(n) ((n) == 0 ? 0 : ((bfd_vma) 1 << ((n) - 1) << 1) - 1)
 439
 440 /*
 441 FUNCTION
 442         bfd_check_overflow
 443
 444 SYNOPSIS
 445         bfd_reloc_status_type bfd_check_overflow
 446           (enum complain_overflow how,
 447            unsigned int bitsize,
 448            unsigned int rightshift,
 449            unsigned int addrsize,
 450            bfd_vma relocation);
 451
 452 DESCRIPTION
 453         Perform overflow checking on @var{relocation} which has
 454         @var{bitsize} significant bits and will be shifted right by
 455         @var{rightshift} bits, on a machine with addresses containing
 456         @var{addrsize} significant bits.  The result is either of
 457         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 458
 459 */
 460
 461 bfd_reloc_status_type
 462 bfd_check_overflow (enum complain_overflow how,
 463                     unsigned int bitsize,
 464                     unsigned int rightshift,
 465                     unsigned int addrsize,
 466                     bfd_vma relocation)
 467 {
 468   bfd_vma fieldmask, addrmask, signmask, ss, a;
 469   bfd_reloc_status_type flag = bfd_reloc_ok;
 470
 471   if (bitsize == 0)
 472     return flag;
 473
 474   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 475      we'll be permissive: extra bits in the field mask will
 476      automatically extend the address mask for purposes of the
 477      overflow check.  */
 478   fieldmask = N_ONES (bitsize);
 479   signmask = ~fieldmask;
 480   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 481   a = (relocation & addrmask) >> rightshift;
 482
 483   switch (how)
 484     {
 485     case complain_overflow_dont:
 486       break;
 487
 488     case complain_overflow_signed:
 489       /* If any sign bits are set, all sign bits must be set.  That
 490          is, A must be a valid negative address after shifting.  */
 491       signmask = ~ (fieldmask >> 1);
 492       /* Fall thru */
 493
 494     case complain_overflow_bitfield:
 495       /* Bitfields are sometimes signed, sometimes unsigned.  We
 496          explicitly allow an address wrap too, which means a bitfield
 497          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 498          if the value has some, but not all, bits set outside the
 499          field.  */
 500       ss = a & signmask;
 501       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 502         flag = bfd_reloc_overflow;
 503       break;
 504
 505     case complain_overflow_unsigned:
 506       /* We have an overflow if the address does not fit in the field.  */
 507       if ((a & signmask) != 0)
 508         flag = bfd_reloc_overflow;
 509       break;
 510
 511     default:
 512       abort ();
 513     }
 514
 515   return flag;
 516 }
 517
 518 /*
 519 FUNCTION
 520         bfd_reloc_offset_in_range
 521
 522 SYNOPSIS
 523         bool bfd_reloc_offset_in_range
 524           (reloc_howto_type *howto,
 525            bfd *abfd,
 526            asection *section,
 527            bfd_size_type offset);
 528
 529 DESCRIPTION
 530         Returns TRUE if the reloc described by @var{HOWTO} can be
 531         applied at @var{OFFSET} octets in @var{SECTION}.
 532
 533 */
 534
 535 /* HOWTO describes a relocation, at offset OCTET.  Return whether the
 536    relocation field is within SECTION of ABFD.  */
 537
 538 bool
 539 bfd_reloc_offset_in_range (reloc_howto_type *howto,
 540                            bfd *abfd,
 541                            asection *section,
 542                            bfd_size_type octet)
 543 {
 544   bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section);
 545   bfd_size_type reloc_size = bfd_get_reloc_size (howto);
 546
 547   /* The reloc field must be contained entirely within the section.
 548      Allow zero length fields (marker relocs or NONE relocs where no
 549      relocation will be performed) at the end of the section.  */
 550   return octet <= octet_end && reloc_size <= octet_end - octet;
 551 }
 552
 553 /* Read and return the section contents at DATA converted to a host
 554    integer (bfd_vma).  The number of bytes read is given by the HOWTO.  */
 555
 556 static bfd_vma
 557 read_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto)
 558 {
 559   switch (howto->size)
 560     {
 561     case 0:
 562       return bfd_get_8 (abfd, data);
 563
 564     case 1:
 565       return bfd_get_16 (abfd, data);
 566
 567     case 2:
 568       return bfd_get_32 (abfd, data);
 569
 570     case 3:
 571       break;
 572
 573 #ifdef BFD64
 574     case 4:
 575       return bfd_get_64 (abfd, data);
 576 #endif
 577
 578     case 5:
 579       return bfd_get_24 (abfd, data);
 580
 581     default:
 582       abort ();
 583     }
 584   return 0;
 585 }
 586
 587 /* Convert VAL to target format and write to DATA.  The number of
 588    bytes written is given by the HOWTO.  */
 589
 590 static void
 591 write_reloc (bfd *abfd, bfd_vma val, bfd_byte *data, reloc_howto_type *howto)
 592 {
 593   switch (howto->size)
 594     {
 595     case 0:
 596       bfd_put_8 (abfd, val, data);
 597       break;
 598
 599     case 1:
 600       bfd_put_16 (abfd, val, data);
 601       break;
 602
 603     case 2:
 604       bfd_put_32 (abfd, val, data);
 605       break;
 606
 607     case 3:
 608       break;
 609
 610 #ifdef BFD64
 611     case 4:
 612       bfd_put_64 (abfd, val, data);
 613       break;
 614 #endif
 615
 616     case 5:
 617       bfd_put_24 (abfd, val, data);
 618       break;
 619
 620     default:
 621       abort ();
 622     }
 623 }
 624
 625 /* Apply RELOCATION value to target bytes at DATA, according to
 626    HOWTO.  */
 627
 628 static void
 629 apply_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto,
 630              bfd_vma relocation)
 631 {
 632   bfd_vma val = read_reloc (abfd, data, howto);
 633
 634   if (howto->negate)
 635     relocation = -relocation;
 636
 637   val = ((val & ~howto->dst_mask)
 638          | (((val & howto->src_mask) + relocation) & howto->dst_mask));
 639
 640   write_reloc (abfd, val, data, howto);
 641 }
 642
 643 /*
 644 FUNCTION
 645         bfd_perform_relocation
 646
 647 SYNOPSIS
 648         bfd_reloc_status_type bfd_perform_relocation
 649           (bfd *abfd,
 650            arelent *reloc_entry,
 651            void *data,
 652            asection *input_section,
 653            bfd *output_bfd,
 654            char **error_message);
 655
 656 DESCRIPTION
 657         If @var{output_bfd} is supplied to this function, the
 658         generated image will be relocatable; the relocations are
 659         copied to the output file after they have been changed to
 660         reflect the new state of the world. There are two ways of
 661         reflecting the results of partial linkage in an output file:
 662         by modifying the output data in place, and by modifying the
 663         relocation record.  Some native formats (e.g., basic a.out and
 664         basic coff) have no way of specifying an addend in the
 665         relocation type, so the addend has to go in the output data.
 666         This is no big deal since in these formats the output data
 667         slot will always be big enough for the addend. Complex reloc
 668         types with addends were invented to solve just this problem.
 669         The @var{error_message} argument is set to an error message if
 670         this return @code{bfd_reloc_dangerous}.
 671
 672 */
 673
 674 bfd_reloc_status_type
 675 bfd_perform_relocation (bfd *abfd,
 676                         arelent *reloc_entry,
 677                         void *data,
 678                         asection *input_section,
 679                         bfd *output_bfd,
 680                         char **error_message)
 681 {
 682   bfd_vma relocation;
 683   bfd_reloc_status_type flag = bfd_reloc_ok;
 684   bfd_size_type octets;
 685   bfd_vma output_base = 0;
 686   reloc_howto_type *howto = reloc_entry->howto;
 687   asection *reloc_target_output_section;
 688   asymbol *symbol;
 689
 690   symbol = *(reloc_entry->sym_ptr_ptr);
 691
 692   /* If we are not producing relocatable output, return an error if
 693      the symbol is not defined.  An undefined weak symbol is
 694      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 695   if (bfd_is_und_section (symbol->section)
 696       && (symbol->flags & BSF_WEAK) == 0
 697       && output_bfd == NULL)
 698     flag = bfd_reloc_undefined;
 699
 700   /* If there is a function supplied to handle this relocation type,
 701      call it.  It'll return `bfd_reloc_continue' if further processing
 702      can be done.  */
 703   if (howto && howto->special_function)
 704     {
 705       bfd_reloc_status_type cont;
 706
 707       /* Note - we do not call bfd_reloc_offset_in_range here as the
 708          reloc_entry->address field might actually be valid for the
 709          backend concerned.  It is up to the special_function itself
 710          to call bfd_reloc_offset_in_range if needed.  */
 711       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 712                                       input_section, output_bfd,
 713                                       error_message);
 714       if (cont != bfd_reloc_continue)
 715         return cont;
 716     }
 717
 718   if (bfd_is_abs_section (symbol->section)
 719       && output_bfd != NULL)
 720     {
 721       reloc_entry->address += input_section->output_offset;
 722       return bfd_reloc_ok;
 723     }
 724
 725   /* PR 17512: file: 0f67f69d.  */
 726   if (howto == NULL)
 727     return bfd_reloc_undefined;
 728
 729   /* Is the address of the relocation really within the section?  */
 730   octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
 731   if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
 732     return bfd_reloc_outofrange;
 733
 734   /* Work out which section the relocation is targeted at and the
 735      initial relocation command value.  */
 736
 737   /* Get symbol value.  (Common symbols are special.)  */
 738   if (bfd_is_com_section (symbol->section))
 739     relocation = 0;
 740   else
 741     relocation = symbol->value;
 742
 743   reloc_target_output_section = symbol->section->output_section;
 744
 745   /* Convert input-section-relative symbol value to absolute.  */
 746   if ((output_bfd && ! howto->partial_inplace)
 747       || reloc_target_output_section == NULL)
 748     output_base = 0;
 749   else
 750     output_base = reloc_target_output_section->vma;
 751
 752   output_base += symbol->section->output_offset;
 753
 754   /* If symbol addresses are in octets, convert to bytes.  */
 755   if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
 756       && (symbol->section->flags & SEC_ELF_OCTETS))
 757     output_base *= bfd_octets_per_byte (abfd, input_section);
 758
 759   relocation += output_base;
 760
 761   /* Add in supplied addend.  */
 762   relocation += reloc_entry->addend;
 763
 764   /* Here the variable relocation holds the final address of the
 765      symbol we are relocating against, plus any addend.  */
 766
 767   if (howto->pc_relative)
 768     {
 769       /* This is a PC relative relocation.  We want to set RELOCATION
 770          to the distance between the address of the symbol and the
 771          location.  RELOCATION is already the address of the symbol.
 772
 773          We start by subtracting the address of the section containing
 774          the location.
 775
 776          If pcrel_offset is set, we must further subtract the position
 777          of the location within the section.  Some targets arrange for
 778          the addend to be the negative of the position of the location
 779          within the section; for example, i386-aout does this.  For
 780          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 781          include the position of the location; for example, ELF.
 782          For those targets, pcrel_offset is TRUE.
 783
 784          If we are producing relocatable output, then we must ensure
 785          that this reloc will be correctly computed when the final
 786          relocation is done.  If pcrel_offset is FALSE we want to wind
 787          up with the negative of the location within the section,
 788          which means we must adjust the existing addend by the change
 789          in the location within the section.  If pcrel_offset is TRUE
 790          we do not want to adjust the existing addend at all.
 791
 792          FIXME: This seems logical to me, but for the case of
 793          producing relocatable output it is not what the code
 794          actually does.  I don't want to change it, because it seems
 795          far too likely that something will break.  */
 796
 797       relocation -=
 798         input_section->output_section->vma + input_section->output_offset;
 799
 800       if (howto->pcrel_offset)
 801         relocation -= reloc_entry->address;
 802     }
 803
 804   if (output_bfd != NULL)
 805     {
 806       if (! howto->partial_inplace)
 807         {
 808           /* This is a partial relocation, and we want to apply the relocation
 809              to the reloc entry rather than the raw data. Modify the reloc
 810              inplace to reflect what we now know.  */
 811           reloc_entry->addend = relocation;
 812           reloc_entry->address += input_section->output_offset;
 813           return flag;
 814         }
 815       else
 816         {
 817           /* This is a partial relocation, but inplace, so modify the
 818              reloc record a bit.
 819
 820              If we've relocated with a symbol with a section, change
 821              into a ref to the section belonging to the symbol.  */
 822
 823           reloc_entry->address += input_section->output_offset;
 824
 825           /* WTF?? */
 826           if (abfd->xvec->flavour == bfd_target_coff_flavour
 827               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 828               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 829             {
 830               /* For m68k-coff, the addend was being subtracted twice during
 831                  relocation with -r.  Removing the line below this comment
 832                  fixes that problem; see PR 2953.
 833
 834 However, Ian wrote the following, regarding removing the line below,
 835 which explains why it is still enabled:  --djm
 836
 837 If you put a patch like that into BFD you need to check all the COFF
 838 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 839 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 840 problem in a different way.  There may very well be a reason that the
 841 code works as it does.
 842
 843 Hmmm.  The first obvious point is that bfd_perform_relocation should
 844 not have any tests that depend upon the flavour.  It's seem like
 845 entirely the wrong place for such a thing.  The second obvious point
 846 is that the current code ignores the reloc addend when producing
 847 relocatable output for COFF.  That's peculiar.  In fact, I really
 848 have no idea what the point of the line you want to remove is.
 849
 850 A typical COFF reloc subtracts the old value of the symbol and adds in
 851 the new value to the location in the object file (if it's a pc
 852 relative reloc it adds the difference between the symbol value and the
 853 location).  When relocating we need to preserve that property.
 854
 855 BFD handles this by setting the addend to the negative of the old
 856 value of the symbol.  Unfortunately it handles common symbols in a
 857 non-standard way (it doesn't subtract the old value) but that's a
 858 different story (we can't change it without losing backward
 859 compatibility with old object files) (coff-i386 does subtract the old
 860 value, to be compatible with existing coff-i386 targets, like SCO).
 861
 862 So everything works fine when not producing relocatable output.  When
 863 we are producing relocatable output, logically we should do exactly
 864 what we do when not producing relocatable output.  Therefore, your
 865 patch is correct.  In fact, it should probably always just set
 866 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 867 add the value into the object file.  This won't hurt the COFF code,
 868 which doesn't use the addend; I'm not sure what it will do to other
 869 formats (the thing to check for would be whether any formats both use
 870 the addend and set partial_inplace).
 871
 872 When I wanted to make coff-i386 produce relocatable output, I ran
 873 into the problem that you are running into: I wanted to remove that
 874 line.  Rather than risk it, I made the coff-i386 relocs use a special
 875 function; it's coff_i386_reloc in coff-i386.c.  The function
 876 specifically adds the addend field into the object file, knowing that
 877 bfd_perform_relocation is not going to.  If you remove that line, then
 878 coff-i386.c will wind up adding the addend field in twice.  It's
 879 trivial to fix; it just needs to be done.
 880
 881 The problem with removing the line is just that it may break some
 882 working code.  With BFD it's hard to be sure of anything.  The right
 883 way to deal with this is simply to build and test at least all the
 884 supported COFF targets.  It should be straightforward if time and disk
 885 space consuming.  For each target:
 886     1) build the linker
 887     2) generate some executable, and link it using -r (I would
 888        probably use paranoia.o and link against newlib/libc.a, which
 889        for all the supported targets would be available in
 890        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 891     3) make the change to reloc.c
 892     4) rebuild the linker
 893     5) repeat step 2
 894     6) if the resulting object files are the same, you have at least
 895        made it no worse
 896     7) if they are different you have to figure out which version is
 897        right
 898 */
 899               relocation -= reloc_entry->addend;
 900               reloc_entry->addend = 0;
 901             }
 902           else
 903             {
 904               reloc_entry->addend = relocation;
 905             }
 906         }
 907     }
 908
 909   /* FIXME: This overflow checking is incomplete, because the value
 910      might have overflowed before we get here.  For a correct check we
 911      need to compute the value in a size larger than bitsize, but we
 912      can't reasonably do that for a reloc the same size as a host
 913      machine word.
 914      FIXME: We should also do overflow checking on the result after
 915      adding in the value contained in the object file.  */
 916   if (howto->complain_on_overflow != complain_overflow_dont
 917       && flag == bfd_reloc_ok)
 918     flag = bfd_check_overflow (howto->complain_on_overflow,
 919                                howto->bitsize,
 920                                howto->rightshift,
 921                                bfd_arch_bits_per_address (abfd),
 922                                relocation);
 923
 924   /* Either we are relocating all the way, or we don't want to apply
 925      the relocation to the reloc entry (probably because there isn't
 926      any room in the output format to describe addends to relocs).  */
 927
 928   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 929      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 930      following program:
 931
 932      struct str
 933      {
 934        unsigned int i0;
 935      } s = { 0 };
 936
 937      int
 938      main ()
 939      {
 940        unsigned long x;
 941
 942        x = 0x100000000;
 943        x <<= (unsigned long) s.i0;
 944        if (x == 0)
 945          printf ("failed\n");
 946        else
 947          printf ("succeeded (%lx)\n", x);
 948      }
 949      */
 950
 951   relocation >>= (bfd_vma) howto->rightshift;
 952
 953   /* Shift everything up to where it's going to be used.  */
 954   relocation <<= (bfd_vma) howto->bitpos;
 955
 956   /* Wait for the day when all have the mask in them.  */
 957
 958   /* What we do:
 959      i instruction to be left alone
 960      o offset within instruction
 961      r relocation offset to apply
 962      S src mask
 963      D dst mask
 964      N ~dst mask
 965      A part 1
 966      B part 2
 967      R result
 968
 969      Do this:
 970      ((  i i i i i o o o o o  from bfd_get<size>
 971      and           S S S S S) to get the size offset we want
 972      +   r r r r r r r r r r) to get the final value to place
 973      and           D D D D D  to chop to right size
 974      -----------------------
 975      =             A A A A A
 976      And this:
 977      (   i i i i i o o o o o  from bfd_get<size>
 978      and N N N N N          ) get instruction
 979      -----------------------
 980      =   B B B B B
 981
 982      And then:
 983      (   B B B B B
 984      or            A A A A A)
 985      -----------------------
 986      =   R R R R R R R R R R  put into bfd_put<size>
 987      */
 988
 989   data = (bfd_byte *) data + octets;
 990   apply_reloc (abfd, data, howto, relocation);
 991   return flag;
 992 }
 993
 994 /*
 995 FUNCTION
 996         bfd_install_relocation
 997
 998 SYNOPSIS
 999         bfd_reloc_status_type bfd_install_relocation
1000           (bfd *abfd,
1001            arelent *reloc_entry,
1002            void *data, bfd_vma data_start,
1003            asection *input_section,
1004            char **error_message);
1005
1006 DESCRIPTION
1007         This looks remarkably like <<bfd_perform_relocation>>, except it
1008         does not expect that the section contents have been filled in.
1009         I.e., it's suitable for use when creating, rather than applying
1010         a relocation.
1011
1012         For now, this function should be considered reserved for the
1013         assembler.
1014 */
1015
1016 bfd_reloc_status_type
1017 bfd_install_relocation (bfd *abfd,
1018                         arelent *reloc_entry,
1019                         void *data_start,
1020                         bfd_vma data_start_offset,
1021                         asection *input_section,
1022                         char **error_message)
1023 {
1024   bfd_vma relocation;
1025   bfd_reloc_status_type flag = bfd_reloc_ok;
1026   bfd_size_type octets;
1027   bfd_vma output_base = 0;
1028   reloc_howto_type *howto = reloc_entry->howto;
1029   asection *reloc_target_output_section;
1030   asymbol *symbol;
1031   bfd_byte *data;
1032
1033   symbol = *(reloc_entry->sym_ptr_ptr);
1034
1035   /* If there is a function supplied to handle this relocation type,
1036      call it.  It'll return `bfd_reloc_continue' if further processing
1037      can be done.  */
1038   if (howto && howto->special_function)
1039     {
1040       bfd_reloc_status_type cont;
1041
1042       /* Note - we do not call bfd_reloc_offset_in_range here as the
1043          reloc_entry->address field might actually be valid for the
1044          backend concerned.  It is up to the special_function itself
1045          to call bfd_reloc_offset_in_range if needed.  */
1046       /* XXX - The special_function calls haven't been fixed up to deal
1047          with creating new relocations and section contents.  */
1048       cont = howto->special_function (abfd, reloc_entry, symbol,
1049                                       /* XXX - Non-portable! */
1050                                       ((bfd_byte *) data_start
1051                                        - data_start_offset),
1052                                       input_section, abfd, error_message);
1053       if (cont != bfd_reloc_continue)
1054         return cont;
1055     }
1056
1057   if (bfd_is_abs_section (symbol->section))
1058     {
1059       reloc_entry->address += input_section->output_offset;
1060       return bfd_reloc_ok;
1061     }
1062
1063   /* No need to check for howto != NULL if !bfd_is_abs_section as
1064      it will have been checked in `bfd_perform_relocation already'.  */
1065
1066   /* Is the address of the relocation really within the section?  */
1067   octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
1068   if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
1069     return bfd_reloc_outofrange;
1070
1071   /* Work out which section the relocation is targeted at and the
1072      initial relocation command value.  */
1073
1074   /* Get symbol value.  (Common symbols are special.)  */
1075   if (bfd_is_com_section (symbol->section))
1076     relocation = 0;
1077   else
1078     relocation = symbol->value;
1079
1080   reloc_target_output_section = symbol->section->output_section;
1081
1082   /* Convert input-section-relative symbol value to absolute.  */
1083   if (! howto->partial_inplace)
1084     output_base = 0;
1085   else
1086     output_base = reloc_target_output_section->vma;
1087
1088   output_base += symbol->section->output_offset;
1089
1090   /* If symbol addresses are in octets, convert to bytes.  */
1091   if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
1092       && (symbol->section->flags & SEC_ELF_OCTETS))
1093     output_base *= bfd_octets_per_byte (abfd, input_section);
1094
1095   relocation += output_base;
1096
1097   /* Add in supplied addend.  */
1098   relocation += reloc_entry->addend;
1099
1100   /* Here the variable relocation holds the final address of the
1101      symbol we are relocating against, plus any addend.  */
1102
1103   if (howto->pc_relative)
1104     {
1105       /* This is a PC relative relocation.  We want to set RELOCATION
1106          to the distance between the address of the symbol and the
1107          location.  RELOCATION is already the address of the symbol.
1108
1109          We start by subtracting the address of the section containing
1110          the location.
1111
1112          If pcrel_offset is set, we must further subtract the position
1113          of the location within the section.  Some targets arrange for
1114          the addend to be the negative of the position of the location
1115          within the section; for example, i386-aout does this.  For
1116          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1117          include the position of the location; for example, ELF.
1118          For those targets, pcrel_offset is TRUE.
1119
1120          If we are producing relocatable output, then we must ensure
1121          that this reloc will be correctly computed when the final
1122          relocation is done.  If pcrel_offset is FALSE we want to wind
1123          up with the negative of the location within the section,
1124          which means we must adjust the existing addend by the change
1125          in the location within the section.  If pcrel_offset is TRUE
1126          we do not want to adjust the existing addend at all.
1127
1128          FIXME: This seems logical to me, but for the case of
1129          producing relocatable output it is not what the code
1130          actually does.  I don't want to change it, because it seems
1131          far too likely that something will break.  */
1132
1133       relocation -=
1134         input_section->output_section->vma + input_section->output_offset;
1135
1136       if (howto->pcrel_offset && howto->partial_inplace)
1137         relocation -= reloc_entry->address;
1138     }
1139
1140   if (! howto->partial_inplace)
1141     {
1142       /* This is a partial relocation, and we want to apply the relocation
1143          to the reloc entry rather than the raw data. Modify the reloc
1144          inplace to reflect what we now know.  */
1145       reloc_entry->addend = relocation;
1146       reloc_entry->address += input_section->output_offset;
1147       return flag;
1148     }
1149   else
1150     {
1151       /* This is a partial relocation, but inplace, so modify the
1152          reloc record a bit.
1153
1154          If we've relocated with a symbol with a section, change
1155          into a ref to the section belonging to the symbol.  */
1156       reloc_entry->address += input_section->output_offset;
1157
1158       /* WTF?? */
1159       if (abfd->xvec->flavour == bfd_target_coff_flavour
1160           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1161           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1162         {
1163
1164           /* For m68k-coff, the addend was being subtracted twice during
1165              relocation with -r.  Removing the line below this comment
1166              fixes that problem; see PR 2953.
1167
1168 However, Ian wrote the following, regarding removing the line below,
1169 which explains why it is still enabled:  --djm
1170
1171 If you put a patch like that into BFD you need to check all the COFF
1172 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1173 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1174 problem in a different way.  There may very well be a reason that the
1175 code works as it does.
1176
1177 Hmmm.  The first obvious point is that bfd_install_relocation should
1178 not have any tests that depend upon the flavour.  It's seem like
1179 entirely the wrong place for such a thing.  The second obvious point
1180 is that the current code ignores the reloc addend when producing
1181 relocatable output for COFF.  That's peculiar.  In fact, I really
1182 have no idea what the point of the line you want to remove is.
1183
1184 A typical COFF reloc subtracts the old value of the symbol and adds in
1185 the new value to the location in the object file (if it's a pc
1186 relative reloc it adds the difference between the symbol value and the
1187 location).  When relocating we need to preserve that property.
1188
1189 BFD handles this by setting the addend to the negative of the old
1190 value of the symbol.  Unfortunately it handles common symbols in a
1191 non-standard way (it doesn't subtract the old value) but that's a
1192 different story (we can't change it without losing backward
1193 compatibility with old object files) (coff-i386 does subtract the old
1194 value, to be compatible with existing coff-i386 targets, like SCO).
1195
1196 So everything works fine when not producing relocatable output.  When
1197 we are producing relocatable output, logically we should do exactly
1198 what we do when not producing relocatable output.  Therefore, your
1199 patch is correct.  In fact, it should probably always just set
1200 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1201 add the value into the object file.  This won't hurt the COFF code,
1202 which doesn't use the addend; I'm not sure what it will do to other
1203 formats (the thing to check for would be whether any formats both use
1204 the addend and set partial_inplace).
1205
1206 When I wanted to make coff-i386 produce relocatable output, I ran
1207 into the problem that you are running into: I wanted to remove that
1208 line.  Rather than risk it, I made the coff-i386 relocs use a special
1209 function; it's coff_i386_reloc in coff-i386.c.  The function
1210 specifically adds the addend field into the object file, knowing that
1211 bfd_install_relocation is not going to.  If you remove that line, then
1212 coff-i386.c will wind up adding the addend field in twice.  It's
1213 trivial to fix; it just needs to be done.
1214
1215 The problem with removing the line is just that it may break some
1216 working code.  With BFD it's hard to be sure of anything.  The right
1217 way to deal with this is simply to build and test at least all the
1218 supported COFF targets.  It should be straightforward if time and disk
1219 space consuming.  For each target:
1220     1) build the linker
1221     2) generate some executable, and link it using -r (I would
1222        probably use paranoia.o and link against newlib/libc.a, which
1223        for all the supported targets would be available in
1224        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1225     3) make the change to reloc.c
1226     4) rebuild the linker
1227     5) repeat step 2
1228     6) if the resulting object files are the same, you have at least
1229        made it no worse
1230     7) if they are different you have to figure out which version is
1231        right.  */
1232           relocation -= reloc_entry->addend;
1233           /* FIXME: There should be no target specific code here...  */
1234           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1235             reloc_entry->addend = 0;
1236         }
1237       else
1238         {
1239           reloc_entry->addend = relocation;
1240         }
1241     }
1242
1243   /* FIXME: This overflow checking is incomplete, because the value
1244      might have overflowed before we get here.  For a correct check we
1245      need to compute the value in a size larger than bitsize, but we
1246      can't reasonably do that for a reloc the same size as a host
1247      machine word.
1248      FIXME: We should also do overflow checking on the result after
1249      adding in the value contained in the object file.  */
1250   if (howto->complain_on_overflow != complain_overflow_dont)
1251     flag = bfd_check_overflow (howto->complain_on_overflow,
1252                                howto->bitsize,
1253                                howto->rightshift,
1254                                bfd_arch_bits_per_address (abfd),
1255                                relocation);
1256
1257   /* Either we are relocating all the way, or we don't want to apply
1258      the relocation to the reloc entry (probably because there isn't
1259      any room in the output format to describe addends to relocs).  */
1260
1261   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1262      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1263      following program:
1264
1265      struct str
1266      {
1267        unsigned int i0;
1268      } s = { 0 };
1269
1270      int
1271      main ()
1272      {
1273        unsigned long x;
1274
1275        x = 0x100000000;
1276        x <<= (unsigned long) s.i0;
1277        if (x == 0)
1278          printf ("failed\n");
1279        else
1280          printf ("succeeded (%lx)\n", x);
1281      }
1282      */
1283
1284   relocation >>= (bfd_vma) howto->rightshift;
1285
1286   /* Shift everything up to where it's going to be used.  */
1287   relocation <<= (bfd_vma) howto->bitpos;
1288
1289   /* Wait for the day when all have the mask in them.  */
1290
1291   /* What we do:
1292      i instruction to be left alone
1293      o offset within instruction
1294      r relocation offset to apply
1295      S src mask
1296      D dst mask
1297      N ~dst mask
1298      A part 1
1299      B part 2
1300      R result
1301
1302      Do this:
1303      ((  i i i i i o o o o o  from bfd_get<size>
1304      and           S S S S S) to get the size offset we want
1305      +   r r r r r r r r r r) to get the final value to place
1306      and           D D D D D  to chop to right size
1307      -----------------------
1308      =             A A A A A
1309      And this:
1310      (   i i i i i o o o o o  from bfd_get<size>
1311      and N N N N N          ) get instruction
1312      -----------------------
1313      =   B B B B B
1314
1315      And then:
1316      (   B B B B B
1317      or            A A A A A)
1318      -----------------------
1319      =   R R R R R R R R R R  put into bfd_put<size>
1320      */
1321
1322   data = (bfd_byte *) data_start + (octets - data_start_offset);
1323   apply_reloc (abfd, data, howto, relocation);
1324   return flag;
1325 }
1326
1327 /* This relocation routine is used by some of the backend linkers.
1328    They do not construct asymbol or arelent structures, so there is no
1329    reason for them to use bfd_perform_relocation.  Also,
1330    bfd_perform_relocation is so hacked up it is easier to write a new
1331    function than to try to deal with it.
1332
1333    This routine does a final relocation.  Whether it is useful for a
1334    relocatable link depends upon how the object format defines
1335    relocations.
1336
1337    FIXME: This routine ignores any special_function in the HOWTO,
1338    since the existing special_function values have been written for
1339    bfd_perform_relocation.
1340
1341    HOWTO is the reloc howto information.
1342    INPUT_BFD is the BFD which the reloc applies to.
1343    INPUT_SECTION is the section which the reloc applies to.
1344    CONTENTS is the contents of the section.
1345    ADDRESS is the address of the reloc within INPUT_SECTION.
1346    VALUE is the value of the symbol the reloc refers to.
1347    ADDEND is the addend of the reloc.  */
1348
1349 bfd_reloc_status_type
1350 _bfd_final_link_relocate (reloc_howto_type *howto,
1351                           bfd *input_bfd,
1352                           asection *input_section,
1353                           bfd_byte *contents,
1354                           bfd_vma address,
1355                           bfd_vma value,
1356                           bfd_vma addend)
1357 {
1358   bfd_vma relocation;
1359   bfd_size_type octets = (address
1360                           * bfd_octets_per_byte (input_bfd, input_section));
1361
1362   /* Sanity check the address.  */
1363   if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
1364     return bfd_reloc_outofrange;
1365
1366   /* This function assumes that we are dealing with a basic relocation
1367      against a symbol.  We want to compute the value of the symbol to
1368      relocate to.  This is just VALUE, the value of the symbol, plus
1369      ADDEND, any addend associated with the reloc.  */
1370   relocation = value + addend;
1371
1372   /* If the relocation is PC relative, we want to set RELOCATION to
1373      the distance between the symbol (currently in RELOCATION) and the
1374      location we are relocating.  Some targets (e.g., i386-aout)
1375      arrange for the contents of the section to be the negative of the
1376      offset of the location within the section; for such targets
1377      pcrel_offset is FALSE.  Other targets (e.g., ELF) simply leave
1378      the contents of the section as zero; for such targets
1379      pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not need to
1380      subtract out the offset of the location within the section (which
1381      is just ADDRESS).  */
1382   if (howto->pc_relative)
1383     {
1384       relocation -= (input_section->output_section->vma
1385                      + input_section->output_offset);
1386       if (howto->pcrel_offset)
1387         relocation -= address;
1388     }
1389
1390   return _bfd_relocate_contents (howto, input_bfd, relocation,
1391                                  contents + octets);
1392 }
1393
1394 /* Relocate a given location using a given value and howto.  */
1395
1396 bfd_reloc_status_type
1397 _bfd_relocate_contents (reloc_howto_type *howto,
1398                         bfd *input_bfd,
1399                         bfd_vma relocation,
1400                         bfd_byte *location)
1401 {
1402   bfd_vma x;
1403   bfd_reloc_status_type flag;
1404   unsigned int rightshift = howto->rightshift;
1405   unsigned int bitpos = howto->bitpos;
1406
1407   if (howto->negate)
1408     relocation = -relocation;
1409
1410   /* Get the value we are going to relocate.  */
1411   x = read_reloc (input_bfd, location, howto);
1412
1413   /* Check for overflow.  FIXME: We may drop bits during the addition
1414      which we don't check for.  We must either check at every single
1415      operation, which would be tedious, or we must do the computations
1416      in a type larger than bfd_vma, which would be inefficient.  */
1417   flag = bfd_reloc_ok;
1418   if (howto->complain_on_overflow != complain_overflow_dont)
1419     {
1420       bfd_vma addrmask, fieldmask, signmask, ss;
1421       bfd_vma a, b, sum;
1422
1423       /* Get the values to be added together.  For signed and unsigned
1424          relocations, we assume that all values should be truncated to
1425          the size of an address.  For bitfields, all the bits matter.
1426          See also bfd_check_overflow.  */
1427       fieldmask = N_ONES (howto->bitsize);
1428       signmask = ~fieldmask;
1429       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1430                   | (fieldmask << rightshift));
1431       a = (relocation & addrmask) >> rightshift;
1432       b = (x & howto->src_mask & addrmask) >> bitpos;
1433       addrmask >>= rightshift;
1434
1435       switch (howto->complain_on_overflow)
1436         {
1437         case complain_overflow_signed:
1438           /* If any sign bits are set, all sign bits must be set.
1439              That is, A must be a valid negative address after
1440              shifting.  */
1441           signmask = ~(fieldmask >> 1);
1442           /* Fall thru */
1443
1444         case complain_overflow_bitfield:
1445           /* Much like the signed check, but for a field one bit
1446              wider.  We allow a bitfield to represent numbers in the
1447              range -2**n to 2**n-1, where n is the number of bits in the
1448              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1449              can't overflow, which is exactly what we want.  */
1450           ss = a & signmask;
1451           if (ss != 0 && ss != (addrmask & signmask))
1452             flag = bfd_reloc_overflow;
1453
1454           /* We only need this next bit of code if the sign bit of B
1455              is below the sign bit of A.  This would only happen if
1456              SRC_MASK had fewer bits than BITSIZE.  Note that if
1457              SRC_MASK has more bits than BITSIZE, we can get into
1458              trouble; we would need to verify that B is in range, as
1459              we do for A above.  */
1460           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1461           ss >>= bitpos;
1462
1463           /* Set all the bits above the sign bit.  */
1464           b = (b ^ ss) - ss;
1465
1466           /* Now we can do the addition.  */
1467           sum = a + b;
1468
1469           /* See if the result has the correct sign.  Bits above the
1470              sign bit are junk now; ignore them.  If the sum is
1471              positive, make sure we did not have all negative inputs;
1472              if the sum is negative, make sure we did not have all
1473              positive inputs.  The test below looks only at the sign
1474              bits, and it really just
1475                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1476
1477              We mask with addrmask here to explicitly allow an address
1478              wrap-around.  The Linux kernel relies on it, and it is
1479              the only way to write assembler code which can run when
1480              loaded at a location 0x80000000 away from the location at
1481              which it is linked.  */
1482           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1483             flag = bfd_reloc_overflow;
1484           break;
1485
1486         case complain_overflow_unsigned:
1487           /* Checking for an unsigned overflow is relatively easy:
1488              trim the addresses and add, and trim the result as well.
1489              Overflow is normally indicated when the result does not
1490              fit in the field.  However, we also need to consider the
1491              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1492              input is 0x80000000, and bfd_vma is only 32 bits; then we
1493              will get sum == 0, but there is an overflow, since the
1494              inputs did not fit in the field.  Instead of doing a
1495              separate test, we can check for this by or-ing in the
1496              operands when testing for the sum overflowing its final
1497              field.  */
1498           sum = (a + b) & addrmask;
1499           if ((a | b | sum) & signmask)
1500             flag = bfd_reloc_overflow;
1501           break;
1502
1503         default:
1504           abort ();
1505         }
1506     }
1507
1508   /* Put RELOCATION in the right bits.  */
1509   relocation >>= (bfd_vma) rightshift;
1510   relocation <<= (bfd_vma) bitpos;
1511
1512   /* Add RELOCATION to the right bits of X.  */
1513   x = ((x & ~howto->dst_mask)
1514        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1515
1516   /* Put the relocated value back in the object file.  */
1517   write_reloc (input_bfd, x, location, howto);
1518   return flag;
1519 }
1520
1521 /* Clear a given location using a given howto, by applying a fixed relocation
1522    value and discarding any in-place addend.  This is used for fixed-up
1523    relocations against discarded symbols, to make ignorable debug or unwind
1524    information more obvious.  */
1525
1526 bfd_reloc_status_type
1527 _bfd_clear_contents (reloc_howto_type *howto,
1528                      bfd *input_bfd,
1529                      asection *input_section,
1530                      bfd_byte *buf,
1531                      bfd_vma off)
1532 {
1533   bfd_vma x;
1534   bfd_byte *location;
1535
1536   if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off))
1537     return bfd_reloc_outofrange;
1538
1539   /* Get the value we are going to relocate.  */
1540   location = buf + off;
1541   x = read_reloc (input_bfd, location, howto);
1542
1543   /* Zero out the unwanted bits of X.  */
1544   x &= ~howto->dst_mask;
1545
1546   /* For a range list, use 1 instead of 0 as placeholder.  0
1547      would terminate the list, hiding any later entries.  */
1548   if (strcmp (bfd_section_name (input_section), ".debug_ranges") == 0
1549       && (howto->dst_mask & 1) != 0)
1550     x |= 1;
1551
1552   /* Put the relocated value back in the object file.  */
1553   write_reloc (input_bfd, x, location, howto);
1554   return bfd_reloc_ok;
1555 }
1556
1557 /*
1558 DOCDD
1559 INODE
1560         howto manager,  , typedef arelent, Relocations
1561
1562 SUBSECTION
1563         The howto manager
1564
1565         When an application wants to create a relocation, but doesn't
1566         know what the target machine might call it, it can find out by
1567         using this bit of code.
1568
1569 */
1570
1571 /*
1572 TYPEDEF
1573         bfd_reloc_code_type
1574
1575 DESCRIPTION
1576         The insides of a reloc code.  The idea is that, eventually, there
1577         will be one enumerator for every type of relocation we ever do.
1578         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1579         return a howto pointer.
1580
1581         This does mean that the application must determine the correct
1582         enumerator value; you can't get a howto pointer from a random set
1583         of attributes.
1584
1585 SENUM
1586    bfd_reloc_code_real
1587
1588 ENUM
1589   BFD_RELOC_64
1590 ENUMX
1591   BFD_RELOC_32
1592 ENUMX
1593   BFD_RELOC_26
1594 ENUMX
1595   BFD_RELOC_24
1596 ENUMX
1597   BFD_RELOC_16
1598 ENUMX
1599   BFD_RELOC_14
1600 ENUMX
1601   BFD_RELOC_8
1602 ENUMDOC
1603   Basic absolute relocations of N bits.
1604
1605 ENUM
1606   BFD_RELOC_64_PCREL
1607 ENUMX
1608   BFD_RELOC_32_PCREL
1609 ENUMX
1610   BFD_RELOC_24_PCREL
1611 ENUMX
1612   BFD_RELOC_16_PCREL
1613 ENUMX
1614   BFD_RELOC_12_PCREL
1615 ENUMX
1616   BFD_RELOC_8_PCREL
1617 ENUMDOC
1618   PC-relative relocations.  Sometimes these are relative to the address
1619 of the relocation itself; sometimes they are relative to the start of
1620 the section containing the relocation.  It depends on the specific target.
1621
1622 ENUM
1623   BFD_RELOC_32_SECREL
1624 ENUMDOC
1625   Section relative relocations.  Some targets need this for DWARF2.
1626
1627 ENUM
1628   BFD_RELOC_32_GOT_PCREL
1629 ENUMX
1630   BFD_RELOC_16_GOT_PCREL
1631 ENUMX
1632   BFD_RELOC_8_GOT_PCREL
1633 ENUMX
1634   BFD_RELOC_32_GOTOFF
1635 ENUMX
1636   BFD_RELOC_16_GOTOFF
1637 ENUMX
1638   BFD_RELOC_LO16_GOTOFF
1639 ENUMX
1640   BFD_RELOC_HI16_GOTOFF
1641 ENUMX
1642   BFD_RELOC_HI16_S_GOTOFF
1643 ENUMX
1644   BFD_RELOC_8_GOTOFF
1645 ENUMX
1646   BFD_RELOC_64_PLT_PCREL
1647 ENUMX
1648   BFD_RELOC_32_PLT_PCREL
1649 ENUMX
1650   BFD_RELOC_24_PLT_PCREL
1651 ENUMX
1652   BFD_RELOC_16_PLT_PCREL
1653 ENUMX
1654   BFD_RELOC_8_PLT_PCREL
1655 ENUMX
1656   BFD_RELOC_64_PLTOFF
1657 ENUMX
1658   BFD_RELOC_32_PLTOFF
1659 ENUMX
1660   BFD_RELOC_16_PLTOFF
1661 ENUMX
1662   BFD_RELOC_LO16_PLTOFF
1663 ENUMX
1664   BFD_RELOC_HI16_PLTOFF
1665 ENUMX
1666   BFD_RELOC_HI16_S_PLTOFF
1667 ENUMX
1668   BFD_RELOC_8_PLTOFF
1669 ENUMDOC
1670   For ELF.
1671
1672 ENUM
1673   BFD_RELOC_SIZE32
1674 ENUMX
1675   BFD_RELOC_SIZE64
1676 ENUMDOC
1677   Size relocations.
1678
1679 ENUM
1680   BFD_RELOC_68K_GLOB_DAT
1681 ENUMX
1682   BFD_RELOC_68K_JMP_SLOT
1683 ENUMX
1684   BFD_RELOC_68K_RELATIVE
1685 ENUMX
1686   BFD_RELOC_68K_TLS_GD32
1687 ENUMX
1688   BFD_RELOC_68K_TLS_GD16
1689 ENUMX
1690   BFD_RELOC_68K_TLS_GD8
1691 ENUMX
1692   BFD_RELOC_68K_TLS_LDM32
1693 ENUMX
1694   BFD_RELOC_68K_TLS_LDM16
1695 ENUMX
1696   BFD_RELOC_68K_TLS_LDM8
1697 ENUMX
1698   BFD_RELOC_68K_TLS_LDO32
1699 ENUMX
1700   BFD_RELOC_68K_TLS_LDO16
1701 ENUMX
1702   BFD_RELOC_68K_TLS_LDO8
1703 ENUMX
1704   BFD_RELOC_68K_TLS_IE32
1705 ENUMX
1706   BFD_RELOC_68K_TLS_IE16
1707 ENUMX
1708   BFD_RELOC_68K_TLS_IE8
1709 ENUMX
1710   BFD_RELOC_68K_TLS_LE32
1711 ENUMX
1712   BFD_RELOC_68K_TLS_LE16
1713 ENUMX
1714   BFD_RELOC_68K_TLS_LE8
1715 ENUMDOC
1716   Relocations used by 68K ELF.
1717
1718 ENUM
1719   BFD_RELOC_32_BASEREL
1720 ENUMX
1721   BFD_RELOC_16_BASEREL
1722 ENUMX
1723   BFD_RELOC_LO16_BASEREL
1724 ENUMX
1725   BFD_RELOC_HI16_BASEREL
1726 ENUMX
1727   BFD_RELOC_HI16_S_BASEREL
1728 ENUMX
1729   BFD_RELOC_8_BASEREL
1730 ENUMX
1731   BFD_RELOC_RVA
1732 ENUMDOC
1733   Linkage-table relative.
1734
1735 ENUM
1736   BFD_RELOC_8_FFnn
1737 ENUMDOC
1738   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1739
1740 ENUM
1741   BFD_RELOC_32_PCREL_S2
1742 ENUMX
1743   BFD_RELOC_16_PCREL_S2
1744 ENUMX
1745   BFD_RELOC_23_PCREL_S2
1746 ENUMDOC
1747   These PC-relative relocations are stored as word displacements --
1748 i.e., byte displacements shifted right two bits.  The 30-bit word
1749 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1750 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1751 signed 16-bit displacement is used on the MIPS, and the 23-bit
1752 displacement is used on the Alpha.
1753
1754 ENUM
1755   BFD_RELOC_HI22
1756 ENUMX
1757   BFD_RELOC_LO10
1758 ENUMDOC
1759   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1760 the target word.  These are used on the SPARC.
1761
1762 ENUM
1763   BFD_RELOC_GPREL16
1764 ENUMX
1765   BFD_RELOC_GPREL32
1766 ENUMDOC
1767   For systems that allocate a Global Pointer register, these are
1768 displacements off that register.  These relocation types are
1769 handled specially, because the value the register will have is
1770 decided relatively late.
1771
1772 ENUM
1773   BFD_RELOC_NONE
1774 ENUMX
1775   BFD_RELOC_SPARC_WDISP22
1776 ENUMX
1777   BFD_RELOC_SPARC22
1778 ENUMX
1779   BFD_RELOC_SPARC13
1780 ENUMX
1781   BFD_RELOC_SPARC_GOT10
1782 ENUMX
1783   BFD_RELOC_SPARC_GOT13
1784 ENUMX
1785   BFD_RELOC_SPARC_GOT22
1786 ENUMX
1787   BFD_RELOC_SPARC_PC10
1788 ENUMX
1789   BFD_RELOC_SPARC_PC22
1790 ENUMX
1791   BFD_RELOC_SPARC_WPLT30
1792 ENUMX
1793   BFD_RELOC_SPARC_COPY
1794 ENUMX
1795   BFD_RELOC_SPARC_GLOB_DAT
1796 ENUMX
1797   BFD_RELOC_SPARC_JMP_SLOT
1798 ENUMX
1799   BFD_RELOC_SPARC_RELATIVE
1800 ENUMX
1801   BFD_RELOC_SPARC_UA16
1802 ENUMX
1803   BFD_RELOC_SPARC_UA32
1804 ENUMX
1805   BFD_RELOC_SPARC_UA64
1806 ENUMX
1807   BFD_RELOC_SPARC_GOTDATA_HIX22
1808 ENUMX
1809   BFD_RELOC_SPARC_GOTDATA_LOX10
1810 ENUMX
1811   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1812 ENUMX
1813   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1814 ENUMX
1815   BFD_RELOC_SPARC_GOTDATA_OP
1816 ENUMX
1817   BFD_RELOC_SPARC_JMP_IREL
1818 ENUMX
1819   BFD_RELOC_SPARC_IRELATIVE
1820 ENUMDOC
1821   SPARC ELF relocations.  There is probably some overlap with other
1822   relocation types already defined.
1823
1824 ENUM
1825   BFD_RELOC_SPARC_BASE13
1826 ENUMX
1827   BFD_RELOC_SPARC_BASE22
1828 ENUMDOC
1829   I think these are specific to SPARC a.out (e.g., Sun 4).
1830
1831 ENUMEQ
1832   BFD_RELOC_SPARC_64
1833   BFD_RELOC_64
1834 ENUMX
1835   BFD_RELOC_SPARC_10
1836 ENUMX
1837   BFD_RELOC_SPARC_11
1838 ENUMX
1839   BFD_RELOC_SPARC_OLO10
1840 ENUMX
1841   BFD_RELOC_SPARC_HH22
1842 ENUMX
1843   BFD_RELOC_SPARC_HM10
1844 ENUMX
1845   BFD_RELOC_SPARC_LM22
1846 ENUMX
1847   BFD_RELOC_SPARC_PC_HH22
1848 ENUMX
1849   BFD_RELOC_SPARC_PC_HM10
1850 ENUMX
1851   BFD_RELOC_SPARC_PC_LM22
1852 ENUMX
1853   BFD_RELOC_SPARC_WDISP16
1854 ENUMX
1855   BFD_RELOC_SPARC_WDISP19
1856 ENUMX
1857   BFD_RELOC_SPARC_7
1858 ENUMX
1859   BFD_RELOC_SPARC_6
1860 ENUMX
1861   BFD_RELOC_SPARC_5
1862 ENUMEQX
1863   BFD_RELOC_SPARC_DISP64
1864   BFD_RELOC_64_PCREL
1865 ENUMX
1866   BFD_RELOC_SPARC_PLT32
1867 ENUMX
1868   BFD_RELOC_SPARC_PLT64
1869 ENUMX
1870   BFD_RELOC_SPARC_HIX22
1871 ENUMX
1872   BFD_RELOC_SPARC_LOX10
1873 ENUMX
1874   BFD_RELOC_SPARC_H44
1875 ENUMX
1876   BFD_RELOC_SPARC_M44
1877 ENUMX
1878   BFD_RELOC_SPARC_L44
1879 ENUMX
1880   BFD_RELOC_SPARC_REGISTER
1881 ENUMX
1882   BFD_RELOC_SPARC_H34
1883 ENUMX
1884   BFD_RELOC_SPARC_SIZE32
1885 ENUMX
1886   BFD_RELOC_SPARC_SIZE64
1887 ENUMX
1888   BFD_RELOC_SPARC_WDISP10
1889 ENUMDOC
1890   SPARC64 relocations
1891
1892 ENUM
1893   BFD_RELOC_SPARC_REV32
1894 ENUMDOC
1895   SPARC little endian relocation
1896 ENUM
1897   BFD_RELOC_SPARC_TLS_GD_HI22
1898 ENUMX
1899   BFD_RELOC_SPARC_TLS_GD_LO10
1900 ENUMX
1901   BFD_RELOC_SPARC_TLS_GD_ADD
1902 ENUMX
1903   BFD_RELOC_SPARC_TLS_GD_CALL
1904 ENUMX
1905   BFD_RELOC_SPARC_TLS_LDM_HI22
1906 ENUMX
1907   BFD_RELOC_SPARC_TLS_LDM_LO10
1908 ENUMX
1909   BFD_RELOC_SPARC_TLS_LDM_ADD
1910 ENUMX
1911   BFD_RELOC_SPARC_TLS_LDM_CALL
1912 ENUMX
1913   BFD_RELOC_SPARC_TLS_LDO_HIX22
1914 ENUMX
1915   BFD_RELOC_SPARC_TLS_LDO_LOX10
1916 ENUMX
1917   BFD_RELOC_SPARC_TLS_LDO_ADD
1918 ENUMX
1919   BFD_RELOC_SPARC_TLS_IE_HI22
1920 ENUMX
1921   BFD_RELOC_SPARC_TLS_IE_LO10
1922 ENUMX
1923   BFD_RELOC_SPARC_TLS_IE_LD
1924 ENUMX
1925   BFD_RELOC_SPARC_TLS_IE_LDX
1926 ENUMX
1927   BFD_RELOC_SPARC_TLS_IE_ADD
1928 ENUMX
1929   BFD_RELOC_SPARC_TLS_LE_HIX22
1930 ENUMX
1931   BFD_RELOC_SPARC_TLS_LE_LOX10
1932 ENUMX
1933   BFD_RELOC_SPARC_TLS_DTPMOD32
1934 ENUMX
1935   BFD_RELOC_SPARC_TLS_DTPMOD64
1936 ENUMX
1937   BFD_RELOC_SPARC_TLS_DTPOFF32
1938 ENUMX
1939   BFD_RELOC_SPARC_TLS_DTPOFF64
1940 ENUMX
1941   BFD_RELOC_SPARC_TLS_TPOFF32
1942 ENUMX
1943   BFD_RELOC_SPARC_TLS_TPOFF64
1944 ENUMDOC
1945   SPARC TLS relocations
1946
1947 ENUM
1948   BFD_RELOC_SPU_IMM7
1949 ENUMX
1950   BFD_RELOC_SPU_IMM8
1951 ENUMX
1952   BFD_RELOC_SPU_IMM10
1953 ENUMX
1954   BFD_RELOC_SPU_IMM10W
1955 ENUMX
1956   BFD_RELOC_SPU_IMM16
1957 ENUMX
1958   BFD_RELOC_SPU_IMM16W
1959 ENUMX
1960   BFD_RELOC_SPU_IMM18
1961 ENUMX
1962   BFD_RELOC_SPU_PCREL9a
1963 ENUMX
1964   BFD_RELOC_SPU_PCREL9b
1965 ENUMX
1966   BFD_RELOC_SPU_PCREL16
1967 ENUMX
1968   BFD_RELOC_SPU_LO16
1969 ENUMX
1970   BFD_RELOC_SPU_HI16
1971 ENUMX
1972   BFD_RELOC_SPU_PPU32
1973 ENUMX
1974   BFD_RELOC_SPU_PPU64
1975 ENUMX
1976   BFD_RELOC_SPU_ADD_PIC
1977 ENUMDOC
1978   SPU Relocations.
1979
1980 ENUM
1981   BFD_RELOC_ALPHA_GPDISP_HI16
1982 ENUMDOC
1983   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1984      "addend" in some special way.
1985   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1986      writing; when reading, it will be the absolute section symbol.  The
1987      addend is the displacement in bytes of the "lda" instruction from
1988      the "ldah" instruction (which is at the address of this reloc).
1989 ENUM
1990   BFD_RELOC_ALPHA_GPDISP_LO16
1991 ENUMDOC
1992   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1993      with GPDISP_HI16 relocs.  The addend is ignored when writing the
1994      relocations out, and is filled in with the file's GP value on
1995      reading, for convenience.
1996
1997 ENUM
1998   BFD_RELOC_ALPHA_GPDISP
1999 ENUMDOC
2000   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2001      relocation except that there is no accompanying GPDISP_LO16
2002      relocation.
2003
2004 ENUM
2005   BFD_RELOC_ALPHA_LITERAL
2006 ENUMX
2007   BFD_RELOC_ALPHA_ELF_LITERAL
2008 ENUMX
2009   BFD_RELOC_ALPHA_LITUSE
2010 ENUMDOC
2011   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2012      the assembler turns it into a LDQ instruction to load the address of
2013      the symbol, and then fills in a register in the real instruction.
2014
2015      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2016      section symbol.  The addend is ignored when writing, but is filled
2017      in with the file's GP value on reading, for convenience, as with the
2018      GPDISP_LO16 reloc.
2019
2020      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2021      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2022      but it generates output not based on the position within the .got
2023      section, but relative to the GP value chosen for the file during the
2024      final link stage.
2025
2026      The LITUSE reloc, on the instruction using the loaded address, gives
2027      information to the linker that it might be able to use to optimize
2028      away some literal section references.  The symbol is ignored (read
2029      as the absolute section symbol), and the "addend" indicates the type
2030      of instruction using the register:
2031               1 - "memory" fmt insn
2032               2 - byte-manipulation (byte offset reg)
2033               3 - jsr (target of branch)
2034
2035 ENUM
2036   BFD_RELOC_ALPHA_HINT
2037 ENUMDOC
2038   The HINT relocation indicates a value that should be filled into the
2039      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2040      prediction logic which may be provided on some processors.
2041
2042 ENUM
2043   BFD_RELOC_ALPHA_LINKAGE
2044 ENUMDOC
2045   The LINKAGE relocation outputs a linkage pair in the object file,
2046      which is filled by the linker.
2047
2048 ENUM
2049   BFD_RELOC_ALPHA_CODEADDR
2050 ENUMDOC
2051   The CODEADDR relocation outputs a STO_CA in the object file,
2052      which is filled by the linker.
2053
2054 ENUM
2055   BFD_RELOC_ALPHA_GPREL_HI16
2056 ENUMX
2057   BFD_RELOC_ALPHA_GPREL_LO16
2058 ENUMDOC
2059   The GPREL_HI/LO relocations together form a 32-bit offset from the
2060      GP register.
2061
2062 ENUM
2063   BFD_RELOC_ALPHA_BRSGP
2064 ENUMDOC
2065   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2066   share a common GP, and the target address is adjusted for
2067   STO_ALPHA_STD_GPLOAD.
2068
2069 ENUM
2070   BFD_RELOC_ALPHA_NOP
2071 ENUMDOC
2072   The NOP relocation outputs a NOP if the longword displacement
2073      between two procedure entry points is < 2^21.
2074
2075 ENUM
2076   BFD_RELOC_ALPHA_BSR
2077 ENUMDOC
2078   The BSR relocation outputs a BSR if the longword displacement
2079      between two procedure entry points is < 2^21.
2080
2081 ENUM
2082   BFD_RELOC_ALPHA_LDA
2083 ENUMDOC
2084   The LDA relocation outputs a LDA if the longword displacement
2085      between two procedure entry points is < 2^16.
2086
2087 ENUM
2088   BFD_RELOC_ALPHA_BOH
2089 ENUMDOC
2090   The BOH relocation outputs a BSR if the longword displacement
2091      between two procedure entry points is < 2^21, or else a hint.
2092
2093 ENUM
2094   BFD_RELOC_ALPHA_TLSGD
2095 ENUMX
2096   BFD_RELOC_ALPHA_TLSLDM
2097 ENUMX
2098   BFD_RELOC_ALPHA_DTPMOD64
2099 ENUMX
2100   BFD_RELOC_ALPHA_GOTDTPREL16
2101 ENUMX
2102   BFD_RELOC_ALPHA_DTPREL64
2103 ENUMX
2104   BFD_RELOC_ALPHA_DTPREL_HI16
2105 ENUMX
2106   BFD_RELOC_ALPHA_DTPREL_LO16
2107 ENUMX
2108   BFD_RELOC_ALPHA_DTPREL16
2109 ENUMX
2110   BFD_RELOC_ALPHA_GOTTPREL16
2111 ENUMX
2112   BFD_RELOC_ALPHA_TPREL64
2113 ENUMX
2114   BFD_RELOC_ALPHA_TPREL_HI16
2115 ENUMX
2116   BFD_RELOC_ALPHA_TPREL_LO16
2117 ENUMX
2118   BFD_RELOC_ALPHA_TPREL16
2119 ENUMDOC
2120   Alpha thread-local storage relocations.
2121
2122 ENUM
2123   BFD_RELOC_MIPS_JMP
2124 ENUMX
2125   BFD_RELOC_MICROMIPS_JMP
2126 ENUMDOC
2127   The MIPS jump instruction.
2128
2129 ENUM
2130   BFD_RELOC_MIPS16_JMP
2131 ENUMDOC
2132   The MIPS16 jump instruction.
2133
2134 ENUM
2135   BFD_RELOC_MIPS16_GPREL
2136 ENUMDOC
2137   MIPS16 GP relative reloc.
2138
2139 ENUM
2140   BFD_RELOC_HI16
2141 ENUMDOC
2142   High 16 bits of 32-bit value; simple reloc.
2143
2144 ENUM
2145   BFD_RELOC_HI16_S
2146 ENUMDOC
2147   High 16 bits of 32-bit value but the low 16 bits will be sign
2148      extended and added to form the final result.  If the low 16
2149      bits form a negative number, we need to add one to the high value
2150      to compensate for the borrow when the low bits are added.
2151
2152 ENUM
2153   BFD_RELOC_LO16
2154 ENUMDOC
2155   Low 16 bits.
2156
2157 ENUM
2158   BFD_RELOC_HI16_PCREL
2159 ENUMDOC
2160   High 16 bits of 32-bit pc-relative value
2161 ENUM
2162   BFD_RELOC_HI16_S_PCREL
2163 ENUMDOC
2164   High 16 bits of 32-bit pc-relative value, adjusted
2165 ENUM
2166   BFD_RELOC_LO16_PCREL
2167 ENUMDOC
2168   Low 16 bits of pc-relative value
2169
2170 ENUM
2171   BFD_RELOC_MIPS16_GOT16
2172 ENUMX
2173   BFD_RELOC_MIPS16_CALL16
2174 ENUMDOC
2175   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2176      16-bit immediate fields
2177 ENUM
2178   BFD_RELOC_MIPS16_HI16
2179 ENUMDOC
2180   MIPS16 high 16 bits of 32-bit value.
2181 ENUM
2182   BFD_RELOC_MIPS16_HI16_S
2183 ENUMDOC
2184   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2185      extended and added to form the final result.  If the low 16
2186      bits form a negative number, we need to add one to the high value
2187      to compensate for the borrow when the low bits are added.
2188 ENUM
2189   BFD_RELOC_MIPS16_LO16
2190 ENUMDOC
2191   MIPS16 low 16 bits.
2192
2193 ENUM
2194   BFD_RELOC_MIPS16_TLS_GD
2195 ENUMX
2196   BFD_RELOC_MIPS16_TLS_LDM
2197 ENUMX
2198   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2199 ENUMX
2200   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2201 ENUMX
2202   BFD_RELOC_MIPS16_TLS_GOTTPREL
2203 ENUMX
2204   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2205 ENUMX
2206   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2207 ENUMDOC
2208   MIPS16 TLS relocations
2209
2210 ENUM
2211   BFD_RELOC_MIPS_LITERAL
2212 ENUMX
2213   BFD_RELOC_MICROMIPS_LITERAL
2214 ENUMDOC
2215   Relocation against a MIPS literal section.
2216
2217 ENUM
2218   BFD_RELOC_MICROMIPS_7_PCREL_S1
2219 ENUMX
2220   BFD_RELOC_MICROMIPS_10_PCREL_S1
2221 ENUMX
2222   BFD_RELOC_MICROMIPS_16_PCREL_S1
2223 ENUMDOC
2224   microMIPS PC-relative relocations.
2225
2226 ENUM
2227   BFD_RELOC_MIPS16_16_PCREL_S1
2228 ENUMDOC
2229   MIPS16 PC-relative relocation.
2230
2231 ENUM
2232   BFD_RELOC_MIPS_21_PCREL_S2
2233 ENUMX
2234   BFD_RELOC_MIPS_26_PCREL_S2
2235 ENUMX
2236   BFD_RELOC_MIPS_18_PCREL_S3
2237 ENUMX
2238   BFD_RELOC_MIPS_19_PCREL_S2
2239 ENUMDOC
2240   MIPS PC-relative relocations.
2241
2242 ENUM
2243   BFD_RELOC_MICROMIPS_GPREL16
2244 ENUMX
2245   BFD_RELOC_MICROMIPS_HI16
2246 ENUMX
2247   BFD_RELOC_MICROMIPS_HI16_S
2248 ENUMX
2249   BFD_RELOC_MICROMIPS_LO16
2250 ENUMDOC
2251   microMIPS versions of generic BFD relocs.
2252
2253 ENUM
2254   BFD_RELOC_MIPS_GOT16
2255 ENUMX
2256   BFD_RELOC_MICROMIPS_GOT16
2257 ENUMX
2258   BFD_RELOC_MIPS_CALL16
2259 ENUMX
2260   BFD_RELOC_MICROMIPS_CALL16
2261 ENUMX
2262   BFD_RELOC_MIPS_GOT_HI16
2263 ENUMX
2264   BFD_RELOC_MICROMIPS_GOT_HI16
2265 ENUMX
2266   BFD_RELOC_MIPS_GOT_LO16
2267 ENUMX
2268   BFD_RELOC_MICROMIPS_GOT_LO16
2269 ENUMX
2270   BFD_RELOC_MIPS_CALL_HI16
2271 ENUMX
2272   BFD_RELOC_MICROMIPS_CALL_HI16
2273 ENUMX
2274   BFD_RELOC_MIPS_CALL_LO16
2275 ENUMX
2276   BFD_RELOC_MICROMIPS_CALL_LO16
2277 ENUMX
2278   BFD_RELOC_MIPS_SUB
2279 ENUMX
2280   BFD_RELOC_MICROMIPS_SUB
2281 ENUMX
2282   BFD_RELOC_MIPS_GOT_PAGE
2283 ENUMX
2284   BFD_RELOC_MICROMIPS_GOT_PAGE
2285 ENUMX
2286   BFD_RELOC_MIPS_GOT_OFST
2287 ENUMX
2288   BFD_RELOC_MICROMIPS_GOT_OFST
2289 ENUMX
2290   BFD_RELOC_MIPS_GOT_DISP
2291 ENUMX
2292   BFD_RELOC_MICROMIPS_GOT_DISP
2293 ENUMX
2294   BFD_RELOC_MIPS_SHIFT5
2295 ENUMX
2296   BFD_RELOC_MIPS_SHIFT6
2297 ENUMX
2298   BFD_RELOC_MIPS_INSERT_A
2299 ENUMX
2300   BFD_RELOC_MIPS_INSERT_B
2301 ENUMX
2302   BFD_RELOC_MIPS_DELETE
2303 ENUMX
2304   BFD_RELOC_MIPS_HIGHEST
2305 ENUMX
2306   BFD_RELOC_MICROMIPS_HIGHEST
2307 ENUMX
2308   BFD_RELOC_MIPS_HIGHER
2309 ENUMX
2310   BFD_RELOC_MICROMIPS_HIGHER
2311 ENUMX
2312   BFD_RELOC_MIPS_SCN_DISP
2313 ENUMX
2314   BFD_RELOC_MICROMIPS_SCN_DISP
2315 ENUMX
2316   BFD_RELOC_MIPS_REL16
2317 ENUMX
2318   BFD_RELOC_MIPS_RELGOT
2319 ENUMX
2320   BFD_RELOC_MIPS_JALR
2321 ENUMX
2322   BFD_RELOC_MICROMIPS_JALR
2323 ENUMX
2324   BFD_RELOC_MIPS_TLS_DTPMOD32
2325 ENUMX
2326   BFD_RELOC_MIPS_TLS_DTPREL32
2327 ENUMX
2328   BFD_RELOC_MIPS_TLS_DTPMOD64
2329 ENUMX
2330   BFD_RELOC_MIPS_TLS_DTPREL64
2331 ENUMX
2332   BFD_RELOC_MIPS_TLS_GD
2333 ENUMX
2334   BFD_RELOC_MICROMIPS_TLS_GD
2335 ENUMX
2336   BFD_RELOC_MIPS_TLS_LDM
2337 ENUMX
2338   BFD_RELOC_MICROMIPS_TLS_LDM
2339 ENUMX
2340   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2341 ENUMX
2342   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2343 ENUMX
2344   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2345 ENUMX
2346   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2347 ENUMX
2348   BFD_RELOC_MIPS_TLS_GOTTPREL
2349 ENUMX
2350   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2351 ENUMX
2352   BFD_RELOC_MIPS_TLS_TPREL32
2353 ENUMX
2354   BFD_RELOC_MIPS_TLS_TPREL64
2355 ENUMX
2356   BFD_RELOC_MIPS_TLS_TPREL_HI16
2357 ENUMX
2358   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2359 ENUMX
2360   BFD_RELOC_MIPS_TLS_TPREL_LO16
2361 ENUMX
2362   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2363 ENUMX
2364   BFD_RELOC_MIPS_EH
2365 ENUMDOC
2366   MIPS ELF relocations.
2367 COMMENT
2368
2369 ENUM
2370   BFD_RELOC_MIPS_COPY
2371 ENUMX
2372   BFD_RELOC_MIPS_JUMP_SLOT
2373 ENUMDOC
2374   MIPS ELF relocations (VxWorks and PLT extensions).
2375 COMMENT
2376
2377 ENUM
2378   BFD_RELOC_MOXIE_10_PCREL
2379 ENUMDOC
2380   Moxie ELF relocations.
2381 COMMENT
2382
2383 ENUM
2384   BFD_RELOC_FT32_10
2385 ENUMX
2386   BFD_RELOC_FT32_20
2387 ENUMX
2388   BFD_RELOC_FT32_17
2389 ENUMX
2390   BFD_RELOC_FT32_18
2391 ENUMX
2392   BFD_RELOC_FT32_RELAX
2393 ENUMX
2394   BFD_RELOC_FT32_SC0
2395 ENUMX
2396   BFD_RELOC_FT32_SC1
2397 ENUMX
2398   BFD_RELOC_FT32_15
2399 ENUMX
2400   BFD_RELOC_FT32_DIFF32
2401 ENUMDOC
2402   FT32 ELF relocations.
2403 COMMENT
2404
2405 ENUM
2406   BFD_RELOC_FRV_LABEL16
2407 ENUMX
2408   BFD_RELOC_FRV_LABEL24
2409 ENUMX
2410   BFD_RELOC_FRV_LO16
2411 ENUMX
2412   BFD_RELOC_FRV_HI16
2413 ENUMX
2414   BFD_RELOC_FRV_GPREL12
2415 ENUMX
2416   BFD_RELOC_FRV_GPRELU12
2417 ENUMX
2418   BFD_RELOC_FRV_GPREL32
2419 ENUMX
2420   BFD_RELOC_FRV_GPRELHI
2421 ENUMX
2422   BFD_RELOC_FRV_GPRELLO
2423 ENUMX
2424   BFD_RELOC_FRV_GOT12
2425 ENUMX
2426   BFD_RELOC_FRV_GOTHI
2427 ENUMX
2428   BFD_RELOC_FRV_GOTLO
2429 ENUMX
2430   BFD_RELOC_FRV_FUNCDESC
2431 ENUMX
2432   BFD_RELOC_FRV_FUNCDESC_GOT12
2433 ENUMX
2434   BFD_RELOC_FRV_FUNCDESC_GOTHI
2435 ENUMX
2436   BFD_RELOC_FRV_FUNCDESC_GOTLO
2437 ENUMX
2438   BFD_RELOC_FRV_FUNCDESC_VALUE
2439 ENUMX
2440   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2441 ENUMX
2442   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2443 ENUMX
2444   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2445 ENUMX
2446   BFD_RELOC_FRV_GOTOFF12
2447 ENUMX
2448   BFD_RELOC_FRV_GOTOFFHI
2449 ENUMX
2450   BFD_RELOC_FRV_GOTOFFLO
2451 ENUMX
2452   BFD_RELOC_FRV_GETTLSOFF
2453 ENUMX
2454   BFD_RELOC_FRV_TLSDESC_VALUE
2455 ENUMX
2456   BFD_RELOC_FRV_GOTTLSDESC12
2457 ENUMX
2458   BFD_RELOC_FRV_GOTTLSDESCHI
2459 ENUMX
2460   BFD_RELOC_FRV_GOTTLSDESCLO
2461 ENUMX
2462   BFD_RELOC_FRV_TLSMOFF12
2463 ENUMX
2464   BFD_RELOC_FRV_TLSMOFFHI
2465 ENUMX
2466   BFD_RELOC_FRV_TLSMOFFLO
2467 ENUMX
2468   BFD_RELOC_FRV_GOTTLSOFF12
2469 ENUMX
2470   BFD_RELOC_FRV_GOTTLSOFFHI
2471 ENUMX
2472   BFD_RELOC_FRV_GOTTLSOFFLO
2473 ENUMX
2474   BFD_RELOC_FRV_TLSOFF
2475 ENUMX
2476   BFD_RELOC_FRV_TLSDESC_RELAX
2477 ENUMX
2478   BFD_RELOC_FRV_GETTLSOFF_RELAX
2479 ENUMX
2480   BFD_RELOC_FRV_TLSOFF_RELAX
2481 ENUMX
2482   BFD_RELOC_FRV_TLSMOFF
2483 ENUMDOC
2484   Fujitsu Frv Relocations.
2485 COMMENT
2486
2487 ENUM
2488   BFD_RELOC_MN10300_GOTOFF24
2489 ENUMDOC
2490   This is a 24bit GOT-relative reloc for the mn10300.
2491 ENUM
2492   BFD_RELOC_MN10300_GOT32
2493 ENUMDOC
2494   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2495   in the instruction.
2496 ENUM
2497   BFD_RELOC_MN10300_GOT24
2498 ENUMDOC
2499   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2500   in the instruction.
2501 ENUM
2502   BFD_RELOC_MN10300_GOT16
2503 ENUMDOC
2504   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2505   in the instruction.
2506 ENUM
2507   BFD_RELOC_MN10300_COPY
2508 ENUMDOC
2509   Copy symbol at runtime.
2510 ENUM
2511   BFD_RELOC_MN10300_GLOB_DAT
2512 ENUMDOC
2513   Create GOT entry.
2514 ENUM
2515   BFD_RELOC_MN10300_JMP_SLOT
2516 ENUMDOC
2517   Create PLT entry.
2518 ENUM
2519   BFD_RELOC_MN10300_RELATIVE
2520 ENUMDOC
2521   Adjust by program base.
2522 ENUM
2523   BFD_RELOC_MN10300_SYM_DIFF
2524 ENUMDOC
2525   Together with another reloc targeted at the same location,
2526   allows for a value that is the difference of two symbols
2527   in the same section.
2528 ENUM
2529   BFD_RELOC_MN10300_ALIGN
2530 ENUMDOC
2531   The addend of this reloc is an alignment power that must
2532   be honoured at the offset's location, regardless of linker
2533   relaxation.
2534 ENUM
2535   BFD_RELOC_MN10300_TLS_GD
2536 ENUMX
2537   BFD_RELOC_MN10300_TLS_LD
2538 ENUMX
2539   BFD_RELOC_MN10300_TLS_LDO
2540 ENUMX
2541   BFD_RELOC_MN10300_TLS_GOTIE
2542 ENUMX
2543   BFD_RELOC_MN10300_TLS_IE
2544 ENUMX
2545   BFD_RELOC_MN10300_TLS_LE
2546 ENUMX
2547   BFD_RELOC_MN10300_TLS_DTPMOD
2548 ENUMX
2549   BFD_RELOC_MN10300_TLS_DTPOFF
2550 ENUMX
2551   BFD_RELOC_MN10300_TLS_TPOFF
2552 ENUMDOC
2553   Various TLS-related relocations.
2554 ENUM
2555   BFD_RELOC_MN10300_32_PCREL
2556 ENUMDOC
2557   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2558   instruction.
2559 ENUM
2560   BFD_RELOC_MN10300_16_PCREL
2561 ENUMDOC
2562   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2563   instruction.
2564 COMMENT
2565
2566 ENUM
2567   BFD_RELOC_386_GOT32
2568 ENUMX
2569   BFD_RELOC_386_PLT32
2570 ENUMX
2571   BFD_RELOC_386_COPY
2572 ENUMX
2573   BFD_RELOC_386_GLOB_DAT
2574 ENUMX
2575   BFD_RELOC_386_JUMP_SLOT
2576 ENUMX
2577   BFD_RELOC_386_RELATIVE
2578 ENUMX
2579   BFD_RELOC_386_GOTOFF
2580 ENUMX
2581   BFD_RELOC_386_GOTPC
2582 ENUMX
2583   BFD_RELOC_386_TLS_TPOFF
2584 ENUMX
2585   BFD_RELOC_386_TLS_IE
2586 ENUMX
2587   BFD_RELOC_386_TLS_GOTIE
2588 ENUMX
2589   BFD_RELOC_386_TLS_LE
2590 ENUMX
2591   BFD_RELOC_386_TLS_GD
2592 ENUMX
2593   BFD_RELOC_386_TLS_LDM
2594 ENUMX
2595   BFD_RELOC_386_TLS_LDO_32
2596 ENUMX
2597   BFD_RELOC_386_TLS_IE_32
2598 ENUMX
2599   BFD_RELOC_386_TLS_LE_32
2600 ENUMX
2601   BFD_RELOC_386_TLS_DTPMOD32
2602 ENUMX
2603   BFD_RELOC_386_TLS_DTPOFF32
2604 ENUMX
2605   BFD_RELOC_386_TLS_TPOFF32
2606 ENUMX
2607   BFD_RELOC_386_TLS_GOTDESC
2608 ENUMX
2609   BFD_RELOC_386_TLS_DESC_CALL
2610 ENUMX
2611   BFD_RELOC_386_TLS_DESC
2612 ENUMX
2613   BFD_RELOC_386_IRELATIVE
2614 ENUMX
2615   BFD_RELOC_386_GOT32X
2616 ENUMDOC
2617   i386/elf relocations
2618
2619 ENUM
2620   BFD_RELOC_X86_64_GOT32
2621 ENUMX
2622   BFD_RELOC_X86_64_PLT32
2623 ENUMX
2624   BFD_RELOC_X86_64_COPY
2625 ENUMX
2626   BFD_RELOC_X86_64_GLOB_DAT
2627 ENUMX
2628   BFD_RELOC_X86_64_JUMP_SLOT
2629 ENUMX
2630   BFD_RELOC_X86_64_RELATIVE
2631 ENUMX
2632   BFD_RELOC_X86_64_GOTPCREL
2633 ENUMX
2634   BFD_RELOC_X86_64_32S
2635 ENUMX
2636   BFD_RELOC_X86_64_DTPMOD64
2637 ENUMX
2638   BFD_RELOC_X86_64_DTPOFF64
2639 ENUMX
2640   BFD_RELOC_X86_64_TPOFF64
2641 ENUMX
2642   BFD_RELOC_X86_64_TLSGD
2643 ENUMX
2644   BFD_RELOC_X86_64_TLSLD
2645 ENUMX
2646   BFD_RELOC_X86_64_DTPOFF32
2647 ENUMX
2648   BFD_RELOC_X86_64_GOTTPOFF
2649 ENUMX
2650   BFD_RELOC_X86_64_TPOFF32
2651 ENUMX
2652   BFD_RELOC_X86_64_GOTOFF64
2653 ENUMX
2654   BFD_RELOC_X86_64_GOTPC32
2655 ENUMX
2656   BFD_RELOC_X86_64_GOT64
2657 ENUMX
2658   BFD_RELOC_X86_64_GOTPCREL64
2659 ENUMX
2660   BFD_RELOC_X86_64_GOTPC64
2661 ENUMX
2662   BFD_RELOC_X86_64_GOTPLT64
2663 ENUMX
2664   BFD_RELOC_X86_64_PLTOFF64
2665 ENUMX
2666   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2667 ENUMX
2668   BFD_RELOC_X86_64_TLSDESC_CALL
2669 ENUMX
2670   BFD_RELOC_X86_64_TLSDESC
2671 ENUMX
2672   BFD_RELOC_X86_64_IRELATIVE
2673 ENUMX
2674   BFD_RELOC_X86_64_PC32_BND
2675 ENUMX
2676   BFD_RELOC_X86_64_PLT32_BND
2677 ENUMX
2678   BFD_RELOC_X86_64_GOTPCRELX
2679 ENUMX
2680   BFD_RELOC_X86_64_REX_GOTPCRELX
2681 ENUMDOC
2682   x86-64/elf relocations
2683
2684 ENUM
2685   BFD_RELOC_NS32K_IMM_8
2686 ENUMX
2687   BFD_RELOC_NS32K_IMM_16
2688 ENUMX
2689   BFD_RELOC_NS32K_IMM_32
2690 ENUMX
2691   BFD_RELOC_NS32K_IMM_8_PCREL
2692 ENUMX
2693   BFD_RELOC_NS32K_IMM_16_PCREL
2694 ENUMX
2695   BFD_RELOC_NS32K_IMM_32_PCREL
2696 ENUMX
2697   BFD_RELOC_NS32K_DISP_8
2698 ENUMX
2699   BFD_RELOC_NS32K_DISP_16
2700 ENUMX
2701   BFD_RELOC_NS32K_DISP_32
2702 ENUMX
2703   BFD_RELOC_NS32K_DISP_8_PCREL
2704 ENUMX
2705   BFD_RELOC_NS32K_DISP_16_PCREL
2706 ENUMX
2707   BFD_RELOC_NS32K_DISP_32_PCREL
2708 ENUMDOC
2709   ns32k relocations
2710
2711 ENUM
2712   BFD_RELOC_PDP11_DISP_8_PCREL
2713 ENUMX
2714   BFD_RELOC_PDP11_DISP_6_PCREL
2715 ENUMDOC
2716   PDP11 relocations
2717
2718 ENUM
2719   BFD_RELOC_PJ_CODE_HI16
2720 ENUMX
2721   BFD_RELOC_PJ_CODE_LO16
2722 ENUMX
2723   BFD_RELOC_PJ_CODE_DIR16
2724 ENUMX
2725   BFD_RELOC_PJ_CODE_DIR32
2726 ENUMX
2727   BFD_RELOC_PJ_CODE_REL16
2728 ENUMX
2729   BFD_RELOC_PJ_CODE_REL32
2730 ENUMDOC
2731   Picojava relocs.  Not all of these appear in object files.
2732
2733 ENUM
2734   BFD_RELOC_PPC_B26
2735 ENUMX
2736   BFD_RELOC_PPC_BA26
2737 ENUMX
2738   BFD_RELOC_PPC_TOC16
2739 ENUMX
2740   BFD_RELOC_PPC_TOC16_LO
2741 ENUMX
2742   BFD_RELOC_PPC_TOC16_HI
2743 ENUMX
2744   BFD_RELOC_PPC_B16
2745 ENUMX
2746   BFD_RELOC_PPC_B16_BRTAKEN
2747 ENUMX
2748   BFD_RELOC_PPC_B16_BRNTAKEN
2749 ENUMX
2750   BFD_RELOC_PPC_BA16
2751 ENUMX
2752   BFD_RELOC_PPC_BA16_BRTAKEN
2753 ENUMX
2754   BFD_RELOC_PPC_BA16_BRNTAKEN
2755 ENUMX
2756   BFD_RELOC_PPC_COPY
2757 ENUMX
2758   BFD_RELOC_PPC_GLOB_DAT
2759 ENUMX
2760   BFD_RELOC_PPC_JMP_SLOT
2761 ENUMX
2762   BFD_RELOC_PPC_RELATIVE
2763 ENUMX
2764   BFD_RELOC_PPC_LOCAL24PC
2765 ENUMX
2766   BFD_RELOC_PPC_EMB_NADDR32
2767 ENUMX
2768   BFD_RELOC_PPC_EMB_NADDR16
2769 ENUMX
2770   BFD_RELOC_PPC_EMB_NADDR16_LO
2771 ENUMX
2772   BFD_RELOC_PPC_EMB_NADDR16_HI
2773 ENUMX
2774   BFD_RELOC_PPC_EMB_NADDR16_HA
2775 ENUMX
2776   BFD_RELOC_PPC_EMB_SDAI16
2777 ENUMX
2778   BFD_RELOC_PPC_EMB_SDA2I16
2779 ENUMX
2780   BFD_RELOC_PPC_EMB_SDA2REL
2781 ENUMX
2782   BFD_RELOC_PPC_EMB_SDA21
2783 ENUMX
2784   BFD_RELOC_PPC_EMB_MRKREF
2785 ENUMX
2786   BFD_RELOC_PPC_EMB_RELSEC16
2787 ENUMX
2788   BFD_RELOC_PPC_EMB_RELST_LO
2789 ENUMX
2790   BFD_RELOC_PPC_EMB_RELST_HI
2791 ENUMX
2792   BFD_RELOC_PPC_EMB_RELST_HA
2793 ENUMX
2794   BFD_RELOC_PPC_EMB_BIT_FLD
2795 ENUMX
2796   BFD_RELOC_PPC_EMB_RELSDA
2797 ENUMX
2798   BFD_RELOC_PPC_VLE_REL8
2799 ENUMX
2800   BFD_RELOC_PPC_VLE_REL15
2801 ENUMX
2802   BFD_RELOC_PPC_VLE_REL24
2803 ENUMX
2804   BFD_RELOC_PPC_VLE_LO16A
2805 ENUMX
2806   BFD_RELOC_PPC_VLE_LO16D
2807 ENUMX
2808   BFD_RELOC_PPC_VLE_HI16A
2809 ENUMX
2810   BFD_RELOC_PPC_VLE_HI16D
2811 ENUMX
2812   BFD_RELOC_PPC_VLE_HA16A
2813 ENUMX
2814   BFD_RELOC_PPC_VLE_HA16D
2815 ENUMX
2816   BFD_RELOC_PPC_VLE_SDA21
2817 ENUMX
2818   BFD_RELOC_PPC_VLE_SDA21_LO
2819 ENUMX
2820   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2821 ENUMX
2822   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2823 ENUMX
2824   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2825 ENUMX
2826   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2827 ENUMX
2828   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2829 ENUMX
2830   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2831 ENUMX
2832   BFD_RELOC_PPC_16DX_HA
2833 ENUMX
2834   BFD_RELOC_PPC_REL16DX_HA
2835 ENUMX
2836   BFD_RELOC_PPC_NEG
2837 ENUMX
2838   BFD_RELOC_PPC64_HIGHER
2839 ENUMX
2840   BFD_RELOC_PPC64_HIGHER_S
2841 ENUMX
2842   BFD_RELOC_PPC64_HIGHEST
2843 ENUMX
2844   BFD_RELOC_PPC64_HIGHEST_S
2845 ENUMX
2846   BFD_RELOC_PPC64_TOC16_LO
2847 ENUMX
2848   BFD_RELOC_PPC64_TOC16_HI
2849 ENUMX
2850   BFD_RELOC_PPC64_TOC16_HA
2851 ENUMX
2852   BFD_RELOC_PPC64_TOC
2853 ENUMX
2854   BFD_RELOC_PPC64_PLTGOT16
2855 ENUMX
2856   BFD_RELOC_PPC64_PLTGOT16_LO
2857 ENUMX
2858   BFD_RELOC_PPC64_PLTGOT16_HI
2859 ENUMX
2860   BFD_RELOC_PPC64_PLTGOT16_HA
2861 ENUMX
2862   BFD_RELOC_PPC64_ADDR16_DS
2863 ENUMX
2864   BFD_RELOC_PPC64_ADDR16_LO_DS
2865 ENUMX
2866   BFD_RELOC_PPC64_GOT16_DS
2867 ENUMX
2868   BFD_RELOC_PPC64_GOT16_LO_DS
2869 ENUMX
2870   BFD_RELOC_PPC64_PLT16_LO_DS
2871 ENUMX
2872   BFD_RELOC_PPC64_SECTOFF_DS
2873 ENUMX
2874   BFD_RELOC_PPC64_SECTOFF_LO_DS
2875 ENUMX
2876   BFD_RELOC_PPC64_TOC16_DS
2877 ENUMX
2878   BFD_RELOC_PPC64_TOC16_LO_DS
2879 ENUMX
2880   BFD_RELOC_PPC64_PLTGOT16_DS
2881 ENUMX
2882   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2883 ENUMX
2884   BFD_RELOC_PPC64_ADDR16_HIGH
2885 ENUMX
2886   BFD_RELOC_PPC64_ADDR16_HIGHA
2887 ENUMX
2888   BFD_RELOC_PPC64_REL16_HIGH
2889 ENUMX
2890   BFD_RELOC_PPC64_REL16_HIGHA
2891 ENUMX
2892   BFD_RELOC_PPC64_REL16_HIGHER
2893 ENUMX
2894   BFD_RELOC_PPC64_REL16_HIGHERA
2895 ENUMX
2896   BFD_RELOC_PPC64_REL16_HIGHEST
2897 ENUMX
2898   BFD_RELOC_PPC64_REL16_HIGHESTA
2899 ENUMX
2900   BFD_RELOC_PPC64_ADDR64_LOCAL
2901 ENUMX
2902   BFD_RELOC_PPC64_ENTRY
2903 ENUMX
2904   BFD_RELOC_PPC64_REL24_NOTOC
2905 ENUMX
2906   BFD_RELOC_PPC64_D34
2907 ENUMX
2908   BFD_RELOC_PPC64_D34_LO
2909 ENUMX
2910   BFD_RELOC_PPC64_D34_HI30
2911 ENUMX
2912   BFD_RELOC_PPC64_D34_HA30
2913 ENUMX
2914   BFD_RELOC_PPC64_PCREL34
2915 ENUMX
2916   BFD_RELOC_PPC64_GOT_PCREL34
2917 ENUMX
2918   BFD_RELOC_PPC64_PLT_PCREL34
2919 ENUMX
2920   BFD_RELOC_PPC64_ADDR16_HIGHER34
2921 ENUMX
2922   BFD_RELOC_PPC64_ADDR16_HIGHERA34
2923 ENUMX
2924   BFD_RELOC_PPC64_ADDR16_HIGHEST34
2925 ENUMX
2926   BFD_RELOC_PPC64_ADDR16_HIGHESTA34
2927 ENUMX
2928   BFD_RELOC_PPC64_REL16_HIGHER34
2929 ENUMX
2930   BFD_RELOC_PPC64_REL16_HIGHERA34
2931 ENUMX
2932   BFD_RELOC_PPC64_REL16_HIGHEST34
2933 ENUMX
2934   BFD_RELOC_PPC64_REL16_HIGHESTA34
2935 ENUMX
2936   BFD_RELOC_PPC64_D28
2937 ENUMX
2938   BFD_RELOC_PPC64_PCREL28
2939 ENUMDOC
2940   Power(rs6000) and PowerPC relocations.
2941
2942 ENUM
2943   BFD_RELOC_PPC_TLS
2944 ENUMX
2945   BFD_RELOC_PPC_TLSGD
2946 ENUMX
2947   BFD_RELOC_PPC_TLSLD
2948 ENUMX
2949   BFD_RELOC_PPC_TLSLE
2950 ENUMX
2951   BFD_RELOC_PPC_TLSIE
2952 ENUMX
2953   BFD_RELOC_PPC_TLSM
2954 ENUMX
2955   BFD_RELOC_PPC_TLSML
2956 ENUMX
2957   BFD_RELOC_PPC_DTPMOD
2958 ENUMX
2959   BFD_RELOC_PPC_TPREL16
2960 ENUMX
2961   BFD_RELOC_PPC_TPREL16_LO
2962 ENUMX
2963   BFD_RELOC_PPC_TPREL16_HI
2964 ENUMX
2965   BFD_RELOC_PPC_TPREL16_HA
2966 ENUMX
2967   BFD_RELOC_PPC_TPREL
2968 ENUMX
2969   BFD_RELOC_PPC_DTPREL16
2970 ENUMX
2971   BFD_RELOC_PPC_DTPREL16_LO
2972 ENUMX
2973   BFD_RELOC_PPC_DTPREL16_HI
2974 ENUMX
2975   BFD_RELOC_PPC_DTPREL16_HA
2976 ENUMX
2977   BFD_RELOC_PPC_DTPREL
2978 ENUMX
2979   BFD_RELOC_PPC_GOT_TLSGD16
2980 ENUMX
2981   BFD_RELOC_PPC_GOT_TLSGD16_LO
2982 ENUMX
2983   BFD_RELOC_PPC_GOT_TLSGD16_HI
2984 ENUMX
2985   BFD_RELOC_PPC_GOT_TLSGD16_HA
2986 ENUMX
2987   BFD_RELOC_PPC_GOT_TLSLD16
2988 ENUMX
2989   BFD_RELOC_PPC_GOT_TLSLD16_LO
2990 ENUMX
2991   BFD_RELOC_PPC_GOT_TLSLD16_HI
2992 ENUMX
2993   BFD_RELOC_PPC_GOT_TLSLD16_HA
2994 ENUMX
2995   BFD_RELOC_PPC_GOT_TPREL16
2996 ENUMX
2997   BFD_RELOC_PPC_GOT_TPREL16_LO
2998 ENUMX
2999   BFD_RELOC_PPC_GOT_TPREL16_HI
3000 ENUMX
3001   BFD_RELOC_PPC_GOT_TPREL16_HA
3002 ENUMX
3003   BFD_RELOC_PPC_GOT_DTPREL16
3004 ENUMX
3005   BFD_RELOC_PPC_GOT_DTPREL16_LO
3006 ENUMX
3007   BFD_RELOC_PPC_GOT_DTPREL16_HI
3008 ENUMX
3009   BFD_RELOC_PPC_GOT_DTPREL16_HA
3010 ENUMX
3011   BFD_RELOC_PPC64_TLSGD
3012 ENUMX
3013   BFD_RELOC_PPC64_TLSLD
3014 ENUMX
3015   BFD_RELOC_PPC64_TLSLE
3016 ENUMX
3017   BFD_RELOC_PPC64_TLSIE
3018 ENUMX
3019   BFD_RELOC_PPC64_TLSM
3020 ENUMX
3021   BFD_RELOC_PPC64_TLSML
3022 ENUMX
3023   BFD_RELOC_PPC64_TPREL16_DS
3024 ENUMX
3025   BFD_RELOC_PPC64_TPREL16_LO_DS
3026 ENUMX
3027   BFD_RELOC_PPC64_TPREL16_HIGH
3028 ENUMX
3029   BFD_RELOC_PPC64_TPREL16_HIGHA
3030 ENUMX
3031   BFD_RELOC_PPC64_TPREL16_HIGHER
3032 ENUMX
3033   BFD_RELOC_PPC64_TPREL16_HIGHERA
3034 ENUMX
3035   BFD_RELOC_PPC64_TPREL16_HIGHEST
3036 ENUMX
3037   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3038 ENUMX
3039   BFD_RELOC_PPC64_DTPREL16_DS
3040 ENUMX
3041   BFD_RELOC_PPC64_DTPREL16_LO_DS
3042 ENUMX
3043   BFD_RELOC_PPC64_DTPREL16_HIGH
3044 ENUMX
3045   BFD_RELOC_PPC64_DTPREL16_HIGHA
3046 ENUMX
3047   BFD_RELOC_PPC64_DTPREL16_HIGHER
3048 ENUMX
3049   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3050 ENUMX
3051   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3052 ENUMX
3053   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3054 ENUMX
3055   BFD_RELOC_PPC64_TPREL34
3056 ENUMX
3057   BFD_RELOC_PPC64_DTPREL34
3058 ENUMX
3059   BFD_RELOC_PPC64_GOT_TLSGD_PCREL34
3060 ENUMX
3061   BFD_RELOC_PPC64_GOT_TLSLD_PCREL34
3062 ENUMX
3063   BFD_RELOC_PPC64_GOT_TPREL_PCREL34
3064 ENUMX
3065   BFD_RELOC_PPC64_GOT_DTPREL_PCREL34
3066 ENUMX
3067   BFD_RELOC_PPC64_TLS_PCREL
3068 ENUMDOC
3069   PowerPC and PowerPC64 thread-local storage relocations.
3070
3071 ENUM
3072   BFD_RELOC_I370_D12
3073 ENUMDOC
3074   IBM 370/390 relocations
3075
3076 ENUM
3077   BFD_RELOC_CTOR
3078 ENUMDOC
3079   The type of reloc used to build a constructor table - at the moment
3080   probably a 32 bit wide absolute relocation, but the target can choose.
3081   It generally does map to one of the other relocation types.
3082
3083 ENUM
3084   BFD_RELOC_ARM_PCREL_BRANCH
3085 ENUMDOC
3086   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3087   not stored in the instruction.
3088 ENUM
3089   BFD_RELOC_ARM_PCREL_BLX
3090 ENUMDOC
3091   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3092   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3093   field in the instruction.
3094 ENUM
3095   BFD_RELOC_THUMB_PCREL_BLX
3096 ENUMDOC
3097   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3098   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3099   field in the instruction.
3100 ENUM
3101   BFD_RELOC_ARM_PCREL_CALL
3102 ENUMDOC
3103   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3104 ENUM
3105   BFD_RELOC_ARM_PCREL_JUMP
3106 ENUMDOC
3107   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3108
3109 ENUM
3110   BFD_RELOC_THUMB_PCREL_BRANCH5
3111 ENUMDOC
3112   ARM 5-bit pc-relative branch for Branch Future instructions.
3113
3114 ENUM
3115   BFD_RELOC_THUMB_PCREL_BFCSEL
3116 ENUMDOC
3117   ARM 6-bit pc-relative branch for BFCSEL instruction.
3118
3119 ENUM
3120   BFD_RELOC_ARM_THUMB_BF17
3121 ENUMDOC
3122   ARM 17-bit pc-relative branch for Branch Future instructions.
3123
3124 ENUM
3125   BFD_RELOC_ARM_THUMB_BF13
3126 ENUMDOC
3127   ARM 13-bit pc-relative branch for BFCSEL instruction.
3128
3129 ENUM
3130   BFD_RELOC_ARM_THUMB_BF19
3131 ENUMDOC
3132   ARM 19-bit pc-relative branch for Branch Future Link instruction.
3133
3134 ENUM
3135   BFD_RELOC_ARM_THUMB_LOOP12
3136 ENUMDOC
3137   ARM 12-bit pc-relative branch for Low Overhead Loop instructions.
3138
3139 ENUM
3140   BFD_RELOC_THUMB_PCREL_BRANCH7
3141 ENUMX
3142   BFD_RELOC_THUMB_PCREL_BRANCH9
3143 ENUMX
3144   BFD_RELOC_THUMB_PCREL_BRANCH12
3145 ENUMX
3146   BFD_RELOC_THUMB_PCREL_BRANCH20
3147 ENUMX
3148   BFD_RELOC_THUMB_PCREL_BRANCH23
3149 ENUMX
3150   BFD_RELOC_THUMB_PCREL_BRANCH25
3151 ENUMDOC
3152   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3153   The lowest bit must be zero and is not stored in the instruction.
3154   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3155   "nn" one smaller in all cases.  Note further that BRANCH23
3156   corresponds to R_ARM_THM_CALL.
3157
3158 ENUM
3159   BFD_RELOC_ARM_OFFSET_IMM
3160 ENUMDOC
3161   12-bit immediate offset, used in ARM-format ldr and str instructions.
3162
3163 ENUM
3164   BFD_RELOC_ARM_THUMB_OFFSET
3165 ENUMDOC
3166   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3167
3168 ENUM
3169   BFD_RELOC_ARM_TARGET1
3170 ENUMDOC
3171   Pc-relative or absolute relocation depending on target.  Used for
3172   entries in .init_array sections.
3173 ENUM
3174   BFD_RELOC_ARM_ROSEGREL32
3175 ENUMDOC
3176   Read-only segment base relative address.
3177 ENUM
3178   BFD_RELOC_ARM_SBREL32
3179 ENUMDOC
3180   Data segment base relative address.
3181 ENUM
3182   BFD_RELOC_ARM_TARGET2
3183 ENUMDOC
3184   This reloc is used for references to RTTI data from exception handling
3185   tables.  The actual definition depends on the target.  It may be a
3186   pc-relative or some form of GOT-indirect relocation.
3187 ENUM
3188   BFD_RELOC_ARM_PREL31
3189 ENUMDOC
3190   31-bit PC relative address.
3191 ENUM
3192   BFD_RELOC_ARM_MOVW
3193 ENUMX
3194   BFD_RELOC_ARM_MOVT
3195 ENUMX
3196   BFD_RELOC_ARM_MOVW_PCREL
3197 ENUMX
3198   BFD_RELOC_ARM_MOVT_PCREL
3199 ENUMX
3200   BFD_RELOC_ARM_THUMB_MOVW
3201 ENUMX
3202   BFD_RELOC_ARM_THUMB_MOVT
3203 ENUMX
3204   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3205 ENUMX
3206   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3207 ENUMDOC
3208   Low and High halfword relocations for MOVW and MOVT instructions.
3209
3210 ENUM
3211   BFD_RELOC_ARM_GOTFUNCDESC
3212 ENUMX
3213   BFD_RELOC_ARM_GOTOFFFUNCDESC
3214 ENUMX
3215   BFD_RELOC_ARM_FUNCDESC
3216 ENUMX
3217   BFD_RELOC_ARM_FUNCDESC_VALUE
3218 ENUMX
3219   BFD_RELOC_ARM_TLS_GD32_FDPIC
3220 ENUMX
3221   BFD_RELOC_ARM_TLS_LDM32_FDPIC
3222 ENUMX
3223   BFD_RELOC_ARM_TLS_IE32_FDPIC
3224 ENUMDOC
3225   ARM FDPIC specific relocations.
3226
3227 ENUM
3228   BFD_RELOC_ARM_JUMP_SLOT
3229 ENUMX
3230   BFD_RELOC_ARM_GLOB_DAT
3231 ENUMX
3232   BFD_RELOC_ARM_GOT32
3233 ENUMX
3234   BFD_RELOC_ARM_PLT32
3235 ENUMX
3236   BFD_RELOC_ARM_RELATIVE
3237 ENUMX
3238   BFD_RELOC_ARM_GOTOFF
3239 ENUMX
3240   BFD_RELOC_ARM_GOTPC
3241 ENUMX
3242   BFD_RELOC_ARM_GOT_PREL
3243 ENUMDOC
3244   Relocations for setting up GOTs and PLTs for shared libraries.
3245
3246 ENUM
3247   BFD_RELOC_ARM_TLS_GD32
3248 ENUMX
3249   BFD_RELOC_ARM_TLS_LDO32
3250 ENUMX
3251   BFD_RELOC_ARM_TLS_LDM32
3252 ENUMX
3253   BFD_RELOC_ARM_TLS_DTPOFF32
3254 ENUMX
3255   BFD_RELOC_ARM_TLS_DTPMOD32
3256 ENUMX
3257   BFD_RELOC_ARM_TLS_TPOFF32
3258 ENUMX
3259   BFD_RELOC_ARM_TLS_IE32
3260 ENUMX
3261   BFD_RELOC_ARM_TLS_LE32
3262 ENUMX
3263   BFD_RELOC_ARM_TLS_GOTDESC
3264 ENUMX
3265   BFD_RELOC_ARM_TLS_CALL
3266 ENUMX
3267   BFD_RELOC_ARM_THM_TLS_CALL
3268 ENUMX
3269   BFD_RELOC_ARM_TLS_DESCSEQ
3270 ENUMX
3271   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3272 ENUMX
3273   BFD_RELOC_ARM_TLS_DESC
3274 ENUMDOC
3275   ARM thread-local storage relocations.
3276
3277 ENUM
3278   BFD_RELOC_ARM_ALU_PC_G0_NC
3279 ENUMX
3280   BFD_RELOC_ARM_ALU_PC_G0
3281 ENUMX
3282   BFD_RELOC_ARM_ALU_PC_G1_NC
3283 ENUMX
3284   BFD_RELOC_ARM_ALU_PC_G1
3285 ENUMX
3286   BFD_RELOC_ARM_ALU_PC_G2
3287 ENUMX
3288   BFD_RELOC_ARM_LDR_PC_G0
3289 ENUMX
3290   BFD_RELOC_ARM_LDR_PC_G1
3291 ENUMX
3292   BFD_RELOC_ARM_LDR_PC_G2
3293 ENUMX
3294   BFD_RELOC_ARM_LDRS_PC_G0
3295 ENUMX
3296   BFD_RELOC_ARM_LDRS_PC_G1
3297 ENUMX
3298   BFD_RELOC_ARM_LDRS_PC_G2
3299 ENUMX
3300   BFD_RELOC_ARM_LDC_PC_G0
3301 ENUMX
3302   BFD_RELOC_ARM_LDC_PC_G1
3303 ENUMX
3304   BFD_RELOC_ARM_LDC_PC_G2
3305 ENUMX
3306   BFD_RELOC_ARM_ALU_SB_G0_NC
3307 ENUMX
3308   BFD_RELOC_ARM_ALU_SB_G0
3309 ENUMX
3310   BFD_RELOC_ARM_ALU_SB_G1_NC
3311 ENUMX
3312   BFD_RELOC_ARM_ALU_SB_G1
3313 ENUMX
3314   BFD_RELOC_ARM_ALU_SB_G2
3315 ENUMX
3316   BFD_RELOC_ARM_LDR_SB_G0
3317 ENUMX
3318   BFD_RELOC_ARM_LDR_SB_G1
3319 ENUMX
3320   BFD_RELOC_ARM_LDR_SB_G2
3321 ENUMX
3322   BFD_RELOC_ARM_LDRS_SB_G0
3323 ENUMX
3324   BFD_RELOC_ARM_LDRS_SB_G1
3325 ENUMX
3326   BFD_RELOC_ARM_LDRS_SB_G2
3327 ENUMX
3328   BFD_RELOC_ARM_LDC_SB_G0
3329 ENUMX
3330   BFD_RELOC_ARM_LDC_SB_G1
3331 ENUMX
3332   BFD_RELOC_ARM_LDC_SB_G2
3333 ENUMDOC
3334   ARM group relocations.
3335
3336 ENUM
3337   BFD_RELOC_ARM_V4BX
3338 ENUMDOC
3339   Annotation of BX instructions.
3340
3341 ENUM
3342   BFD_RELOC_ARM_IRELATIVE
3343 ENUMDOC
3344   ARM support for STT_GNU_IFUNC.
3345
3346 ENUM
3347   BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3348 ENUMX
3349   BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3350 ENUMX
3351   BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3352 ENUMX
3353   BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3354 ENUMDOC
3355   Thumb1 relocations to support execute-only code.
3356
3357 ENUM
3358   BFD_RELOC_ARM_IMMEDIATE
3359 ENUMX
3360   BFD_RELOC_ARM_ADRL_IMMEDIATE
3361 ENUMX
3362   BFD_RELOC_ARM_T32_IMMEDIATE
3363 ENUMX
3364   BFD_RELOC_ARM_T32_ADD_IMM
3365 ENUMX
3366   BFD_RELOC_ARM_T32_IMM12
3367 ENUMX
3368   BFD_RELOC_ARM_T32_ADD_PC12
3369 ENUMX
3370   BFD_RELOC_ARM_SHIFT_IMM
3371 ENUMX
3372   BFD_RELOC_ARM_SMC
3373 ENUMX
3374   BFD_RELOC_ARM_HVC
3375 ENUMX
3376   BFD_RELOC_ARM_SWI
3377 ENUMX
3378   BFD_RELOC_ARM_MULTI
3379 ENUMX
3380   BFD_RELOC_ARM_CP_OFF_IMM
3381 ENUMX
3382   BFD_RELOC_ARM_CP_OFF_IMM_S2
3383 ENUMX
3384   BFD_RELOC_ARM_T32_CP_OFF_IMM
3385 ENUMX
3386   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3387 ENUMX
3388   BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM
3389 ENUMX
3390   BFD_RELOC_ARM_ADR_IMM
3391 ENUMX
3392   BFD_RELOC_ARM_LDR_IMM
3393 ENUMX
3394   BFD_RELOC_ARM_LITERAL
3395 ENUMX
3396   BFD_RELOC_ARM_IN_POOL
3397 ENUMX
3398   BFD_RELOC_ARM_OFFSET_IMM8
3399 ENUMX
3400   BFD_RELOC_ARM_T32_OFFSET_U8
3401 ENUMX
3402   BFD_RELOC_ARM_T32_OFFSET_IMM
3403 ENUMX
3404   BFD_RELOC_ARM_HWLITERAL
3405 ENUMX
3406   BFD_RELOC_ARM_THUMB_ADD
3407 ENUMX
3408   BFD_RELOC_ARM_THUMB_IMM
3409 ENUMX
3410   BFD_RELOC_ARM_THUMB_SHIFT
3411 ENUMDOC
3412   These relocs are only used within the ARM assembler.  They are not
3413   (at present) written to any object files.
3414
3415 ENUM
3416   BFD_RELOC_SH_PCDISP8BY2
3417 ENUMX
3418   BFD_RELOC_SH_PCDISP12BY2
3419 ENUMX
3420   BFD_RELOC_SH_IMM3
3421 ENUMX
3422   BFD_RELOC_SH_IMM3U
3423 ENUMX
3424   BFD_RELOC_SH_DISP12
3425 ENUMX
3426   BFD_RELOC_SH_DISP12BY2
3427 ENUMX
3428   BFD_RELOC_SH_DISP12BY4
3429 ENUMX
3430   BFD_RELOC_SH_DISP12BY8
3431 ENUMX
3432   BFD_RELOC_SH_DISP20
3433 ENUMX
3434   BFD_RELOC_SH_DISP20BY8
3435 ENUMX
3436   BFD_RELOC_SH_IMM4
3437 ENUMX
3438   BFD_RELOC_SH_IMM4BY2
3439 ENUMX
3440   BFD_RELOC_SH_IMM4BY4
3441 ENUMX
3442   BFD_RELOC_SH_IMM8
3443 ENUMX
3444   BFD_RELOC_SH_IMM8BY2
3445 ENUMX
3446   BFD_RELOC_SH_IMM8BY4
3447 ENUMX
3448   BFD_RELOC_SH_PCRELIMM8BY2
3449 ENUMX
3450   BFD_RELOC_SH_PCRELIMM8BY4
3451 ENUMX
3452   BFD_RELOC_SH_SWITCH16
3453 ENUMX
3454   BFD_RELOC_SH_SWITCH32
3455 ENUMX
3456   BFD_RELOC_SH_USES
3457 ENUMX
3458   BFD_RELOC_SH_COUNT
3459 ENUMX
3460   BFD_RELOC_SH_ALIGN
3461 ENUMX
3462   BFD_RELOC_SH_CODE
3463 ENUMX
3464   BFD_RELOC_SH_DATA
3465 ENUMX
3466   BFD_RELOC_SH_LABEL
3467 ENUMX
3468   BFD_RELOC_SH_LOOP_START
3469 ENUMX
3470   BFD_RELOC_SH_LOOP_END
3471 ENUMX
3472   BFD_RELOC_SH_COPY
3473 ENUMX
3474   BFD_RELOC_SH_GLOB_DAT
3475 ENUMX
3476   BFD_RELOC_SH_JMP_SLOT
3477 ENUMX
3478   BFD_RELOC_SH_RELATIVE
3479 ENUMX
3480   BFD_RELOC_SH_GOTPC
3481 ENUMX
3482   BFD_RELOC_SH_GOT_LOW16
3483 ENUMX
3484   BFD_RELOC_SH_GOT_MEDLOW16
3485 ENUMX
3486   BFD_RELOC_SH_GOT_MEDHI16
3487 ENUMX
3488   BFD_RELOC_SH_GOT_HI16
3489 ENUMX
3490   BFD_RELOC_SH_GOTPLT_LOW16
3491 ENUMX
3492   BFD_RELOC_SH_GOTPLT_MEDLOW16
3493 ENUMX
3494   BFD_RELOC_SH_GOTPLT_MEDHI16
3495 ENUMX
3496   BFD_RELOC_SH_GOTPLT_HI16
3497 ENUMX
3498   BFD_RELOC_SH_PLT_LOW16
3499 ENUMX
3500   BFD_RELOC_SH_PLT_MEDLOW16
3501 ENUMX
3502   BFD_RELOC_SH_PLT_MEDHI16
3503 ENUMX
3504   BFD_RELOC_SH_PLT_HI16
3505 ENUMX
3506   BFD_RELOC_SH_GOTOFF_LOW16
3507 ENUMX
3508   BFD_RELOC_SH_GOTOFF_MEDLOW16
3509 ENUMX
3510   BFD_RELOC_SH_GOTOFF_MEDHI16
3511 ENUMX
3512   BFD_RELOC_SH_GOTOFF_HI16
3513 ENUMX
3514   BFD_RELOC_SH_GOTPC_LOW16
3515 ENUMX
3516   BFD_RELOC_SH_GOTPC_MEDLOW16
3517 ENUMX
3518   BFD_RELOC_SH_GOTPC_MEDHI16
3519 ENUMX
3520   BFD_RELOC_SH_GOTPC_HI16
3521 ENUMX
3522   BFD_RELOC_SH_COPY64
3523 ENUMX
3524   BFD_RELOC_SH_GLOB_DAT64
3525 ENUMX
3526   BFD_RELOC_SH_JMP_SLOT64
3527 ENUMX
3528   BFD_RELOC_SH_RELATIVE64
3529 ENUMX
3530   BFD_RELOC_SH_GOT10BY4
3531 ENUMX
3532   BFD_RELOC_SH_GOT10BY8
3533 ENUMX
3534   BFD_RELOC_SH_GOTPLT10BY4
3535 ENUMX
3536   BFD_RELOC_SH_GOTPLT10BY8
3537 ENUMX
3538   BFD_RELOC_SH_GOTPLT32
3539 ENUMX
3540   BFD_RELOC_SH_SHMEDIA_CODE
3541 ENUMX
3542   BFD_RELOC_SH_IMMU5
3543 ENUMX
3544   BFD_RELOC_SH_IMMS6
3545 ENUMX
3546   BFD_RELOC_SH_IMMS6BY32
3547 ENUMX
3548   BFD_RELOC_SH_IMMU6
3549 ENUMX
3550   BFD_RELOC_SH_IMMS10
3551 ENUMX
3552   BFD_RELOC_SH_IMMS10BY2
3553 ENUMX
3554   BFD_RELOC_SH_IMMS10BY4
3555 ENUMX
3556   BFD_RELOC_SH_IMMS10BY8
3557 ENUMX
3558   BFD_RELOC_SH_IMMS16
3559 ENUMX
3560   BFD_RELOC_SH_IMMU16
3561 ENUMX
3562   BFD_RELOC_SH_IMM_LOW16
3563 ENUMX
3564   BFD_RELOC_SH_IMM_LOW16_PCREL
3565 ENUMX
3566   BFD_RELOC_SH_IMM_MEDLOW16
3567 ENUMX
3568   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3569 ENUMX
3570   BFD_RELOC_SH_IMM_MEDHI16
3571 ENUMX
3572   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3573 ENUMX
3574   BFD_RELOC_SH_IMM_HI16
3575 ENUMX
3576   BFD_RELOC_SH_IMM_HI16_PCREL
3577 ENUMX
3578   BFD_RELOC_SH_PT_16
3579 ENUMX
3580   BFD_RELOC_SH_TLS_GD_32
3581 ENUMX
3582   BFD_RELOC_SH_TLS_LD_32
3583 ENUMX
3584   BFD_RELOC_SH_TLS_LDO_32
3585 ENUMX
3586   BFD_RELOC_SH_TLS_IE_32
3587 ENUMX
3588   BFD_RELOC_SH_TLS_LE_32
3589 ENUMX
3590   BFD_RELOC_SH_TLS_DTPMOD32
3591 ENUMX
3592   BFD_RELOC_SH_TLS_DTPOFF32
3593 ENUMX
3594   BFD_RELOC_SH_TLS_TPOFF32
3595 ENUMX
3596   BFD_RELOC_SH_GOT20
3597 ENUMX
3598   BFD_RELOC_SH_GOTOFF20
3599 ENUMX
3600   BFD_RELOC_SH_GOTFUNCDESC
3601 ENUMX
3602   BFD_RELOC_SH_GOTFUNCDESC20
3603 ENUMX
3604   BFD_RELOC_SH_GOTOFFFUNCDESC
3605 ENUMX
3606   BFD_RELOC_SH_GOTOFFFUNCDESC20
3607 ENUMX
3608   BFD_RELOC_SH_FUNCDESC
3609 ENUMDOC
3610   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3611
3612 ENUM
3613   BFD_RELOC_ARC_NONE
3614 ENUMX
3615   BFD_RELOC_ARC_8
3616 ENUMX
3617   BFD_RELOC_ARC_16
3618 ENUMX
3619   BFD_RELOC_ARC_24
3620 ENUMX
3621   BFD_RELOC_ARC_32
3622 ENUMX
3623   BFD_RELOC_ARC_N8
3624 ENUMX
3625   BFD_RELOC_ARC_N16
3626 ENUMX
3627   BFD_RELOC_ARC_N24
3628 ENUMX
3629   BFD_RELOC_ARC_N32
3630 ENUMX
3631   BFD_RELOC_ARC_SDA
3632 ENUMX
3633   BFD_RELOC_ARC_SECTOFF
3634 ENUMX
3635   BFD_RELOC_ARC_S21H_PCREL
3636 ENUMX
3637   BFD_RELOC_ARC_S21W_PCREL
3638 ENUMX
3639   BFD_RELOC_ARC_S25H_PCREL
3640 ENUMX
3641   BFD_RELOC_ARC_S25W_PCREL
3642 ENUMX
3643   BFD_RELOC_ARC_SDA32
3644 ENUMX
3645   BFD_RELOC_ARC_SDA_LDST
3646 ENUMX
3647   BFD_RELOC_ARC_SDA_LDST1
3648 ENUMX
3649   BFD_RELOC_ARC_SDA_LDST2
3650 ENUMX
3651   BFD_RELOC_ARC_SDA16_LD
3652 ENUMX
3653   BFD_RELOC_ARC_SDA16_LD1
3654 ENUMX
3655   BFD_RELOC_ARC_SDA16_LD2
3656 ENUMX
3657   BFD_RELOC_ARC_S13_PCREL
3658 ENUMX
3659   BFD_RELOC_ARC_W
3660 ENUMX
3661   BFD_RELOC_ARC_32_ME
3662 ENUMX
3663   BFD_RELOC_ARC_32_ME_S
3664 ENUMX
3665   BFD_RELOC_ARC_N32_ME
3666 ENUMX
3667   BFD_RELOC_ARC_SECTOFF_ME
3668 ENUMX
3669   BFD_RELOC_ARC_SDA32_ME
3670 ENUMX
3671   BFD_RELOC_ARC_W_ME
3672 ENUMX
3673   BFD_RELOC_AC_SECTOFF_U8
3674 ENUMX
3675   BFD_RELOC_AC_SECTOFF_U8_1
3676 ENUMX
3677   BFD_RELOC_AC_SECTOFF_U8_2
3678 ENUMX
3679   BFD_RELOC_AC_SECTOFF_S9
3680 ENUMX
3681   BFD_RELOC_AC_SECTOFF_S9_1
3682 ENUMX
3683   BFD_RELOC_AC_SECTOFF_S9_2
3684 ENUMX
3685   BFD_RELOC_ARC_SECTOFF_ME_1
3686 ENUMX
3687   BFD_RELOC_ARC_SECTOFF_ME_2
3688 ENUMX
3689   BFD_RELOC_ARC_SECTOFF_1
3690 ENUMX
3691   BFD_RELOC_ARC_SECTOFF_2
3692 ENUMX
3693   BFD_RELOC_ARC_SDA_12
3694 ENUMX
3695   BFD_RELOC_ARC_SDA16_ST2
3696 ENUMX
3697   BFD_RELOC_ARC_32_PCREL
3698 ENUMX
3699   BFD_RELOC_ARC_PC32
3700 ENUMX
3701   BFD_RELOC_ARC_GOT32
3702 ENUMX
3703   BFD_RELOC_ARC_GOTPC32
3704 ENUMX
3705   BFD_RELOC_ARC_PLT32
3706 ENUMX
3707   BFD_RELOC_ARC_COPY
3708 ENUMX
3709   BFD_RELOC_ARC_GLOB_DAT
3710 ENUMX
3711   BFD_RELOC_ARC_JMP_SLOT
3712 ENUMX
3713   BFD_RELOC_ARC_RELATIVE
3714 ENUMX
3715   BFD_RELOC_ARC_GOTOFF
3716 ENUMX
3717   BFD_RELOC_ARC_GOTPC
3718 ENUMX
3719   BFD_RELOC_ARC_S21W_PCREL_PLT
3720 ENUMX
3721   BFD_RELOC_ARC_S25H_PCREL_PLT
3722 ENUMX
3723   BFD_RELOC_ARC_TLS_DTPMOD
3724 ENUMX
3725   BFD_RELOC_ARC_TLS_TPOFF
3726 ENUMX
3727   BFD_RELOC_ARC_TLS_GD_GOT
3728 ENUMX
3729   BFD_RELOC_ARC_TLS_GD_LD
3730 ENUMX
3731   BFD_RELOC_ARC_TLS_GD_CALL
3732 ENUMX
3733   BFD_RELOC_ARC_TLS_IE_GOT
3734 ENUMX
3735   BFD_RELOC_ARC_TLS_DTPOFF
3736 ENUMX
3737   BFD_RELOC_ARC_TLS_DTPOFF_S9
3738 ENUMX
3739   BFD_RELOC_ARC_TLS_LE_S9
3740 ENUMX
3741   BFD_RELOC_ARC_TLS_LE_32
3742 ENUMX
3743   BFD_RELOC_ARC_S25W_PCREL_PLT
3744 ENUMX
3745   BFD_RELOC_ARC_S21H_PCREL_PLT
3746 ENUMX
3747   BFD_RELOC_ARC_NPS_CMEM16
3748 ENUMX
3749   BFD_RELOC_ARC_JLI_SECTOFF
3750 ENUMDOC
3751   ARC relocs.
3752
3753 ENUM
3754   BFD_RELOC_BFIN_16_IMM
3755 ENUMDOC
3756   ADI Blackfin 16 bit immediate absolute reloc.
3757 ENUM
3758   BFD_RELOC_BFIN_16_HIGH
3759 ENUMDOC
3760   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3761 ENUM
3762   BFD_RELOC_BFIN_4_PCREL
3763 ENUMDOC
3764   ADI Blackfin 'a' part of LSETUP.
3765 ENUM
3766   BFD_RELOC_BFIN_5_PCREL
3767 ENUMDOC
3768   ADI Blackfin.
3769 ENUM
3770   BFD_RELOC_BFIN_16_LOW
3771 ENUMDOC
3772   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3773 ENUM
3774   BFD_RELOC_BFIN_10_PCREL
3775 ENUMDOC
3776   ADI Blackfin.
3777 ENUM
3778   BFD_RELOC_BFIN_11_PCREL
3779 ENUMDOC
3780   ADI Blackfin 'b' part of LSETUP.
3781 ENUM
3782   BFD_RELOC_BFIN_12_PCREL_JUMP
3783 ENUMDOC
3784   ADI Blackfin.
3785 ENUM
3786   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3787 ENUMDOC
3788   ADI Blackfin Short jump, pcrel.
3789 ENUM
3790   BFD_RELOC_BFIN_24_PCREL_CALL_X
3791 ENUMDOC
3792   ADI Blackfin Call.x not implemented.
3793 ENUM
3794   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3795 ENUMDOC
3796   ADI Blackfin Long Jump pcrel.
3797 ENUM
3798   BFD_RELOC_BFIN_GOT17M4
3799 ENUMX
3800   BFD_RELOC_BFIN_GOTHI
3801 ENUMX
3802   BFD_RELOC_BFIN_GOTLO
3803 ENUMX
3804   BFD_RELOC_BFIN_FUNCDESC
3805 ENUMX
3806   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3807 ENUMX
3808   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3809 ENUMX
3810   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3811 ENUMX
3812   BFD_RELOC_BFIN_FUNCDESC_VALUE
3813 ENUMX
3814   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3815 ENUMX
3816   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3817 ENUMX
3818   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3819 ENUMX
3820   BFD_RELOC_BFIN_GOTOFF17M4
3821 ENUMX
3822   BFD_RELOC_BFIN_GOTOFFHI
3823 ENUMX
3824   BFD_RELOC_BFIN_GOTOFFLO
3825 ENUMDOC
3826   ADI Blackfin FD-PIC relocations.
3827 ENUM
3828   BFD_RELOC_BFIN_GOT
3829 ENUMDOC
3830   ADI Blackfin GOT relocation.
3831 ENUM
3832   BFD_RELOC_BFIN_PLTPC
3833 ENUMDOC
3834   ADI Blackfin PLTPC relocation.
3835 ENUM
3836   BFD_ARELOC_BFIN_PUSH
3837 ENUMDOC
3838   ADI Blackfin arithmetic relocation.
3839 ENUM
3840   BFD_ARELOC_BFIN_CONST
3841 ENUMDOC
3842   ADI Blackfin arithmetic relocation.
3843 ENUM
3844   BFD_ARELOC_BFIN_ADD
3845 ENUMDOC
3846   ADI Blackfin arithmetic relocation.
3847 ENUM
3848   BFD_ARELOC_BFIN_SUB
3849 ENUMDOC
3850   ADI Blackfin arithmetic relocation.
3851 ENUM
3852   BFD_ARELOC_BFIN_MULT
3853 ENUMDOC
3854   ADI Blackfin arithmetic relocation.
3855 ENUM
3856   BFD_ARELOC_BFIN_DIV
3857 ENUMDOC
3858   ADI Blackfin arithmetic relocation.
3859 ENUM
3860   BFD_ARELOC_BFIN_MOD
3861 ENUMDOC
3862   ADI Blackfin arithmetic relocation.
3863 ENUM
3864   BFD_ARELOC_BFIN_LSHIFT
3865 ENUMDOC
3866   ADI Blackfin arithmetic relocation.
3867 ENUM
3868   BFD_ARELOC_BFIN_RSHIFT
3869 ENUMDOC
3870   ADI Blackfin arithmetic relocation.
3871 ENUM
3872   BFD_ARELOC_BFIN_AND
3873 ENUMDOC
3874   ADI Blackfin arithmetic relocation.
3875 ENUM
3876   BFD_ARELOC_BFIN_OR
3877 ENUMDOC
3878   ADI Blackfin arithmetic relocation.
3879 ENUM
3880   BFD_ARELOC_BFIN_XOR
3881 ENUMDOC
3882   ADI Blackfin arithmetic relocation.
3883 ENUM
3884   BFD_ARELOC_BFIN_LAND
3885 ENUMDOC
3886   ADI Blackfin arithmetic relocation.
3887 ENUM
3888   BFD_ARELOC_BFIN_LOR
3889 ENUMDOC
3890   ADI Blackfin arithmetic relocation.
3891 ENUM
3892   BFD_ARELOC_BFIN_LEN
3893 ENUMDOC
3894   ADI Blackfin arithmetic relocation.
3895 ENUM
3896   BFD_ARELOC_BFIN_NEG
3897 ENUMDOC
3898   ADI Blackfin arithmetic relocation.
3899 ENUM
3900   BFD_ARELOC_BFIN_COMP
3901 ENUMDOC
3902   ADI Blackfin arithmetic relocation.
3903 ENUM
3904   BFD_ARELOC_BFIN_PAGE
3905 ENUMDOC
3906   ADI Blackfin arithmetic relocation.
3907 ENUM
3908   BFD_ARELOC_BFIN_HWPAGE
3909 ENUMDOC
3910   ADI Blackfin arithmetic relocation.
3911 ENUM
3912   BFD_ARELOC_BFIN_ADDR
3913 ENUMDOC
3914   ADI Blackfin arithmetic relocation.
3915
3916 ENUM
3917   BFD_RELOC_D10V_10_PCREL_R
3918 ENUMDOC
3919   Mitsubishi D10V relocs.
3920   This is a 10-bit reloc with the right 2 bits
3921   assumed to be 0.
3922 ENUM
3923   BFD_RELOC_D10V_10_PCREL_L
3924 ENUMDOC
3925   Mitsubishi D10V relocs.
3926   This is a 10-bit reloc with the right 2 bits
3927   assumed to be 0.  This is the same as the previous reloc
3928   except it is in the left container, i.e.,
3929   shifted left 15 bits.
3930 ENUM
3931   BFD_RELOC_D10V_18
3932 ENUMDOC
3933   This is an 18-bit reloc with the right 2 bits
3934   assumed to be 0.
3935 ENUM
3936   BFD_RELOC_D10V_18_PCREL
3937 ENUMDOC
3938   This is an 18-bit reloc with the right 2 bits
3939   assumed to be 0.
3940
3941 ENUM
3942   BFD_RELOC_D30V_6
3943 ENUMDOC
3944   Mitsubishi D30V relocs.
3945   This is a 6-bit absolute reloc.
3946 ENUM
3947   BFD_RELOC_D30V_9_PCREL
3948 ENUMDOC
3949   This is a 6-bit pc-relative reloc with
3950   the right 3 bits assumed to be 0.
3951 ENUM
3952   BFD_RELOC_D30V_9_PCREL_R
3953 ENUMDOC
3954   This is a 6-bit pc-relative reloc with
3955   the right 3 bits assumed to be 0. Same
3956   as the previous reloc but on the right side
3957   of the container.
3958 ENUM
3959   BFD_RELOC_D30V_15
3960 ENUMDOC
3961   This is a 12-bit absolute reloc with the
3962   right 3 bitsassumed to be 0.
3963 ENUM
3964   BFD_RELOC_D30V_15_PCREL
3965 ENUMDOC
3966   This is a 12-bit pc-relative reloc with
3967   the right 3 bits assumed to be 0.
3968 ENUM
3969   BFD_RELOC_D30V_15_PCREL_R
3970 ENUMDOC
3971   This is a 12-bit pc-relative reloc with
3972   the right 3 bits assumed to be 0. Same
3973   as the previous reloc but on the right side
3974   of the container.
3975 ENUM
3976   BFD_RELOC_D30V_21
3977 ENUMDOC
3978   This is an 18-bit absolute reloc with
3979   the right 3 bits assumed to be 0.
3980 ENUM
3981   BFD_RELOC_D30V_21_PCREL
3982 ENUMDOC
3983   This is an 18-bit pc-relative reloc with
3984   the right 3 bits assumed to be 0.
3985 ENUM
3986   BFD_RELOC_D30V_21_PCREL_R
3987 ENUMDOC
3988   This is an 18-bit pc-relative reloc with
3989   the right 3 bits assumed to be 0. Same
3990   as the previous reloc but on the right side
3991   of the container.
3992 ENUM
3993   BFD_RELOC_D30V_32
3994 ENUMDOC
3995   This is a 32-bit absolute reloc.
3996 ENUM
3997   BFD_RELOC_D30V_32_PCREL
3998 ENUMDOC
3999   This is a 32-bit pc-relative reloc.
4000
4001 ENUM
4002   BFD_RELOC_DLX_HI16_S
4003 ENUMDOC
4004   DLX relocs
4005 ENUM
4006   BFD_RELOC_DLX_LO16
4007 ENUMDOC
4008   DLX relocs
4009 ENUM
4010   BFD_RELOC_DLX_JMP26
4011 ENUMDOC
4012   DLX relocs
4013
4014 ENUM
4015   BFD_RELOC_M32C_HI8
4016 ENUMX
4017   BFD_RELOC_M32C_RL_JUMP
4018 ENUMX
4019   BFD_RELOC_M32C_RL_1ADDR
4020 ENUMX
4021   BFD_RELOC_M32C_RL_2ADDR
4022 ENUMDOC
4023   Renesas M16C/M32C Relocations.
4024
4025 ENUM
4026   BFD_RELOC_M32R_24
4027 ENUMDOC
4028   Renesas M32R (formerly Mitsubishi M32R) relocs.
4029   This is a 24 bit absolute address.
4030 ENUM
4031   BFD_RELOC_M32R_10_PCREL
4032 ENUMDOC
4033   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
4034 ENUM
4035   BFD_RELOC_M32R_18_PCREL
4036 ENUMDOC
4037   This is an 18-bit reloc with the right 2 bits assumed to be 0.
4038 ENUM
4039   BFD_RELOC_M32R_26_PCREL
4040 ENUMDOC
4041   This is a 26-bit reloc with the right 2 bits assumed to be 0.
4042 ENUM
4043   BFD_RELOC_M32R_HI16_ULO
4044 ENUMDOC
4045   This is a 16-bit reloc containing the high 16 bits of an address
4046   used when the lower 16 bits are treated as unsigned.
4047 ENUM
4048   BFD_RELOC_M32R_HI16_SLO
4049 ENUMDOC
4050   This is a 16-bit reloc containing the high 16 bits of an address
4051   used when the lower 16 bits are treated as signed.
4052 ENUM
4053   BFD_RELOC_M32R_LO16
4054 ENUMDOC
4055   This is a 16-bit reloc containing the lower 16 bits of an address.
4056 ENUM
4057   BFD_RELOC_M32R_SDA16
4058 ENUMDOC
4059   This is a 16-bit reloc containing the small data area offset for use in
4060   add3, load, and store instructions.
4061 ENUM
4062   BFD_RELOC_M32R_GOT24
4063 ENUMX
4064   BFD_RELOC_M32R_26_PLTREL
4065 ENUMX
4066   BFD_RELOC_M32R_COPY
4067 ENUMX
4068   BFD_RELOC_M32R_GLOB_DAT
4069 ENUMX
4070   BFD_RELOC_M32R_JMP_SLOT
4071 ENUMX
4072   BFD_RELOC_M32R_RELATIVE
4073 ENUMX
4074   BFD_RELOC_M32R_GOTOFF
4075 ENUMX
4076   BFD_RELOC_M32R_GOTOFF_HI_ULO
4077 ENUMX
4078   BFD_RELOC_M32R_GOTOFF_HI_SLO
4079 ENUMX
4080   BFD_RELOC_M32R_GOTOFF_LO
4081 ENUMX
4082   BFD_RELOC_M32R_GOTPC24
4083 ENUMX
4084   BFD_RELOC_M32R_GOT16_HI_ULO
4085 ENUMX
4086   BFD_RELOC_M32R_GOT16_HI_SLO
4087 ENUMX
4088   BFD_RELOC_M32R_GOT16_LO
4089 ENUMX
4090   BFD_RELOC_M32R_GOTPC_HI_ULO
4091 ENUMX
4092   BFD_RELOC_M32R_GOTPC_HI_SLO
4093 ENUMX
4094   BFD_RELOC_M32R_GOTPC_LO
4095 ENUMDOC
4096   For PIC.
4097
4098
4099 ENUM
4100   BFD_RELOC_NDS32_20
4101 ENUMDOC
4102   NDS32 relocs.
4103   This is a 20 bit absolute address.
4104 ENUM
4105   BFD_RELOC_NDS32_9_PCREL
4106 ENUMDOC
4107   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4108 ENUM
4109   BFD_RELOC_NDS32_WORD_9_PCREL
4110 ENUMDOC
4111   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4112 ENUM
4113   BFD_RELOC_NDS32_15_PCREL
4114 ENUMDOC
4115   This is an 15-bit reloc with the right 1 bit assumed to be 0.
4116 ENUM
4117   BFD_RELOC_NDS32_17_PCREL
4118 ENUMDOC
4119   This is an 17-bit reloc with the right 1 bit assumed to be 0.
4120 ENUM
4121   BFD_RELOC_NDS32_25_PCREL
4122 ENUMDOC
4123   This is a 25-bit reloc with the right 1 bit assumed to be 0.
4124 ENUM
4125   BFD_RELOC_NDS32_HI20
4126 ENUMDOC
4127   This is a 20-bit reloc containing the high 20 bits of an address
4128   used with the lower 12 bits
4129 ENUM
4130   BFD_RELOC_NDS32_LO12S3
4131 ENUMDOC
4132   This is a 12-bit reloc containing the lower 12 bits of an address
4133   then shift right by 3. This is used with ldi,sdi...
4134 ENUM
4135   BFD_RELOC_NDS32_LO12S2
4136 ENUMDOC
4137   This is a 12-bit reloc containing the lower 12 bits of an address
4138   then shift left by 2. This is used with lwi,swi...
4139 ENUM
4140   BFD_RELOC_NDS32_LO12S1
4141 ENUMDOC
4142   This is a 12-bit reloc containing the lower 12 bits of an address
4143   then shift left by 1. This is used with lhi,shi...
4144 ENUM
4145   BFD_RELOC_NDS32_LO12S0
4146 ENUMDOC
4147   This is a 12-bit reloc containing the lower 12 bits of an address
4148   then shift left by 0. This is used with lbisbi...
4149 ENUM
4150   BFD_RELOC_NDS32_LO12S0_ORI
4151 ENUMDOC
4152   This is a 12-bit reloc containing the lower 12 bits of an address
4153   then shift left by 0. This is only used with branch relaxations
4154 ENUM
4155   BFD_RELOC_NDS32_SDA15S3
4156 ENUMDOC
4157   This is a 15-bit reloc containing the small data area 18-bit signed offset
4158   and shift left by 3 for use in ldi, sdi...
4159 ENUM
4160   BFD_RELOC_NDS32_SDA15S2
4161 ENUMDOC
4162   This is a 15-bit reloc containing the small data area 17-bit signed offset
4163   and shift left by 2 for use in lwi, swi...
4164 ENUM
4165   BFD_RELOC_NDS32_SDA15S1
4166 ENUMDOC
4167   This is a 15-bit reloc containing the small data area 16-bit signed offset
4168   and shift left by 1 for use in lhi, shi...
4169 ENUM
4170   BFD_RELOC_NDS32_SDA15S0
4171 ENUMDOC
4172   This is a 15-bit reloc containing the small data area 15-bit signed offset
4173   and shift left by 0 for use in lbi, sbi...
4174 ENUM
4175   BFD_RELOC_NDS32_SDA16S3
4176 ENUMDOC
4177   This is a 16-bit reloc containing the small data area 16-bit signed offset
4178   and shift left by 3
4179 ENUM
4180   BFD_RELOC_NDS32_SDA17S2
4181 ENUMDOC
4182   This is a 17-bit reloc containing the small data area 17-bit signed offset
4183   and shift left by 2 for use in lwi.gp, swi.gp...
4184 ENUM
4185   BFD_RELOC_NDS32_SDA18S1
4186 ENUMDOC
4187   This is a 18-bit reloc containing the small data area 18-bit signed offset
4188   and shift left by 1 for use in lhi.gp, shi.gp...
4189 ENUM
4190   BFD_RELOC_NDS32_SDA19S0
4191 ENUMDOC
4192   This is a 19-bit reloc containing the small data area 19-bit signed offset
4193   and shift left by 0 for use in lbi.gp, sbi.gp...
4194 ENUM
4195   BFD_RELOC_NDS32_GOT20
4196 ENUMX
4197   BFD_RELOC_NDS32_9_PLTREL
4198 ENUMX
4199   BFD_RELOC_NDS32_25_PLTREL
4200 ENUMX
4201   BFD_RELOC_NDS32_COPY
4202 ENUMX
4203   BFD_RELOC_NDS32_GLOB_DAT
4204 ENUMX
4205   BFD_RELOC_NDS32_JMP_SLOT
4206 ENUMX
4207   BFD_RELOC_NDS32_RELATIVE
4208 ENUMX
4209   BFD_RELOC_NDS32_GOTOFF
4210 ENUMX
4211   BFD_RELOC_NDS32_GOTOFF_HI20
4212 ENUMX
4213   BFD_RELOC_NDS32_GOTOFF_LO12
4214 ENUMX
4215   BFD_RELOC_NDS32_GOTPC20
4216 ENUMX
4217   BFD_RELOC_NDS32_GOT_HI20
4218 ENUMX
4219   BFD_RELOC_NDS32_GOT_LO12
4220 ENUMX
4221   BFD_RELOC_NDS32_GOTPC_HI20
4222 ENUMX
4223   BFD_RELOC_NDS32_GOTPC_LO12
4224 ENUMDOC
4225   for PIC
4226 ENUM
4227   BFD_RELOC_NDS32_INSN16
4228 ENUMX
4229   BFD_RELOC_NDS32_LABEL
4230 ENUMX
4231   BFD_RELOC_NDS32_LONGCALL1
4232 ENUMX
4233   BFD_RELOC_NDS32_LONGCALL2
4234 ENUMX
4235   BFD_RELOC_NDS32_LONGCALL3
4236 ENUMX
4237   BFD_RELOC_NDS32_LONGJUMP1
4238 ENUMX
4239   BFD_RELOC_NDS32_LONGJUMP2
4240 ENUMX
4241   BFD_RELOC_NDS32_LONGJUMP3
4242 ENUMX
4243   BFD_RELOC_NDS32_LOADSTORE
4244 ENUMX
4245   BFD_RELOC_NDS32_9_FIXED
4246 ENUMX
4247   BFD_RELOC_NDS32_15_FIXED
4248 ENUMX
4249   BFD_RELOC_NDS32_17_FIXED
4250 ENUMX
4251   BFD_RELOC_NDS32_25_FIXED
4252 ENUMX
4253   BFD_RELOC_NDS32_LONGCALL4
4254 ENUMX
4255   BFD_RELOC_NDS32_LONGCALL5
4256 ENUMX
4257   BFD_RELOC_NDS32_LONGCALL6
4258 ENUMX
4259   BFD_RELOC_NDS32_LONGJUMP4
4260 ENUMX
4261   BFD_RELOC_NDS32_LONGJUMP5
4262 ENUMX
4263   BFD_RELOC_NDS32_LONGJUMP6
4264 ENUMX
4265   BFD_RELOC_NDS32_LONGJUMP7
4266 ENUMDOC
4267   for relax
4268 ENUM
4269   BFD_RELOC_NDS32_PLTREL_HI20
4270 ENUMX
4271   BFD_RELOC_NDS32_PLTREL_LO12
4272 ENUMX
4273   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4274 ENUMX
4275   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4276 ENUMDOC
4277   for PIC
4278 ENUM
4279   BFD_RELOC_NDS32_SDA12S2_DP
4280 ENUMX
4281   BFD_RELOC_NDS32_SDA12S2_SP
4282 ENUMX
4283   BFD_RELOC_NDS32_LO12S2_DP
4284 ENUMX
4285   BFD_RELOC_NDS32_LO12S2_SP
4286 ENUMDOC
4287   for floating point
4288 ENUM
4289   BFD_RELOC_NDS32_DWARF2_OP1
4290 ENUMX
4291   BFD_RELOC_NDS32_DWARF2_OP2
4292 ENUMX
4293   BFD_RELOC_NDS32_DWARF2_LEB
4294 ENUMDOC
4295   for dwarf2 debug_line.
4296 ENUM
4297   BFD_RELOC_NDS32_UPDATE_TA
4298 ENUMDOC
4299   for eliminate 16-bit instructions
4300 ENUM
4301   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4302 ENUMX
4303   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4304 ENUMX
4305   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4306 ENUMX
4307   BFD_RELOC_NDS32_GOT_LO15
4308 ENUMX
4309   BFD_RELOC_NDS32_GOT_LO19
4310 ENUMX
4311   BFD_RELOC_NDS32_GOTOFF_LO15
4312 ENUMX
4313   BFD_RELOC_NDS32_GOTOFF_LO19
4314 ENUMX
4315   BFD_RELOC_NDS32_GOT15S2
4316 ENUMX
4317   BFD_RELOC_NDS32_GOT17S2
4318 ENUMDOC
4319   for PIC object relaxation
4320 ENUM
4321   BFD_RELOC_NDS32_5
4322 ENUMDOC
4323   NDS32 relocs.
4324   This is a 5 bit absolute address.
4325 ENUM
4326   BFD_RELOC_NDS32_10_UPCREL
4327 ENUMDOC
4328   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4329 ENUM
4330   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4331 ENUMDOC
4332   If fp were omitted, fp can used as another gp.
4333 ENUM
4334   BFD_RELOC_NDS32_RELAX_ENTRY
4335 ENUMX
4336   BFD_RELOC_NDS32_GOT_SUFF
4337 ENUMX
4338   BFD_RELOC_NDS32_GOTOFF_SUFF
4339 ENUMX
4340   BFD_RELOC_NDS32_PLT_GOT_SUFF
4341 ENUMX
4342   BFD_RELOC_NDS32_MULCALL_SUFF
4343 ENUMX
4344   BFD_RELOC_NDS32_PTR
4345 ENUMX
4346   BFD_RELOC_NDS32_PTR_COUNT
4347 ENUMX
4348   BFD_RELOC_NDS32_PTR_RESOLVED
4349 ENUMX
4350   BFD_RELOC_NDS32_PLTBLOCK
4351 ENUMX
4352   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4353 ENUMX
4354   BFD_RELOC_NDS32_RELAX_REGION_END
4355 ENUMX
4356   BFD_RELOC_NDS32_MINUEND
4357 ENUMX
4358   BFD_RELOC_NDS32_SUBTRAHEND
4359 ENUMX
4360   BFD_RELOC_NDS32_DIFF8
4361 ENUMX
4362   BFD_RELOC_NDS32_DIFF16
4363 ENUMX
4364   BFD_RELOC_NDS32_DIFF32
4365 ENUMX
4366   BFD_RELOC_NDS32_DIFF_ULEB128
4367 ENUMX
4368   BFD_RELOC_NDS32_EMPTY
4369 ENUMDOC
4370   relaxation relative relocation types
4371 ENUM
4372   BFD_RELOC_NDS32_25_ABS
4373 ENUMDOC
4374   This is a 25 bit absolute address.
4375 ENUM
4376   BFD_RELOC_NDS32_DATA
4377 ENUMX
4378   BFD_RELOC_NDS32_TRAN
4379 ENUMX
4380   BFD_RELOC_NDS32_17IFC_PCREL
4381 ENUMX
4382   BFD_RELOC_NDS32_10IFCU_PCREL
4383 ENUMDOC
4384   For ex9 and ifc using.
4385 ENUM
4386   BFD_RELOC_NDS32_TPOFF
4387 ENUMX
4388   BFD_RELOC_NDS32_GOTTPOFF
4389 ENUMX
4390   BFD_RELOC_NDS32_TLS_LE_HI20
4391 ENUMX
4392   BFD_RELOC_NDS32_TLS_LE_LO12
4393 ENUMX
4394   BFD_RELOC_NDS32_TLS_LE_20
4395 ENUMX
4396   BFD_RELOC_NDS32_TLS_LE_15S0
4397 ENUMX
4398   BFD_RELOC_NDS32_TLS_LE_15S1
4399 ENUMX
4400   BFD_RELOC_NDS32_TLS_LE_15S2
4401 ENUMX
4402   BFD_RELOC_NDS32_TLS_LE_ADD
4403 ENUMX
4404   BFD_RELOC_NDS32_TLS_LE_LS
4405 ENUMX
4406   BFD_RELOC_NDS32_TLS_IE_HI20
4407 ENUMX
4408   BFD_RELOC_NDS32_TLS_IE_LO12
4409 ENUMX
4410   BFD_RELOC_NDS32_TLS_IE_LO12S2
4411 ENUMX
4412   BFD_RELOC_NDS32_TLS_IEGP_HI20
4413 ENUMX
4414   BFD_RELOC_NDS32_TLS_IEGP_LO12
4415 ENUMX
4416   BFD_RELOC_NDS32_TLS_IEGP_LO12S2
4417 ENUMX
4418   BFD_RELOC_NDS32_TLS_IEGP_LW
4419 ENUMX
4420   BFD_RELOC_NDS32_TLS_DESC
4421 ENUMX
4422   BFD_RELOC_NDS32_TLS_DESC_HI20
4423 ENUMX
4424   BFD_RELOC_NDS32_TLS_DESC_LO12
4425 ENUMX
4426   BFD_RELOC_NDS32_TLS_DESC_20
4427 ENUMX
4428   BFD_RELOC_NDS32_TLS_DESC_SDA17S2
4429 ENUMX
4430   BFD_RELOC_NDS32_TLS_DESC_ADD
4431 ENUMX
4432   BFD_RELOC_NDS32_TLS_DESC_FUNC
4433 ENUMX
4434   BFD_RELOC_NDS32_TLS_DESC_CALL
4435 ENUMX
4436   BFD_RELOC_NDS32_TLS_DESC_MEM
4437 ENUMX
4438   BFD_RELOC_NDS32_REMOVE
4439 ENUMX
4440   BFD_RELOC_NDS32_GROUP
4441 ENUMDOC
4442   For TLS.
4443 ENUM
4444   BFD_RELOC_NDS32_LSI
4445 ENUMDOC
4446   For floating load store relaxation.
4447
4448
4449 ENUM
4450   BFD_RELOC_V850_9_PCREL
4451 ENUMDOC
4452   This is a 9-bit reloc
4453 ENUM
4454   BFD_RELOC_V850_22_PCREL
4455 ENUMDOC
4456   This is a 22-bit reloc
4457
4458 ENUM
4459   BFD_RELOC_V850_SDA_16_16_OFFSET
4460 ENUMDOC
4461   This is a 16 bit offset from the short data area pointer.
4462 ENUM
4463   BFD_RELOC_V850_SDA_15_16_OFFSET
4464 ENUMDOC
4465   This is a 16 bit offset (of which only 15 bits are used) from the
4466   short data area pointer.
4467 ENUM
4468   BFD_RELOC_V850_ZDA_16_16_OFFSET
4469 ENUMDOC
4470   This is a 16 bit offset from the zero data area pointer.
4471 ENUM
4472   BFD_RELOC_V850_ZDA_15_16_OFFSET
4473 ENUMDOC
4474   This is a 16 bit offset (of which only 15 bits are used) from the
4475   zero data area pointer.
4476 ENUM
4477   BFD_RELOC_V850_TDA_6_8_OFFSET
4478 ENUMDOC
4479   This is an 8 bit offset (of which only 6 bits are used) from the
4480   tiny data area pointer.
4481 ENUM
4482   BFD_RELOC_V850_TDA_7_8_OFFSET
4483 ENUMDOC
4484   This is an 8bit offset (of which only 7 bits are used) from the tiny
4485   data area pointer.
4486 ENUM
4487   BFD_RELOC_V850_TDA_7_7_OFFSET
4488 ENUMDOC
4489   This is a 7 bit offset from the tiny data area pointer.
4490 ENUM
4491   BFD_RELOC_V850_TDA_16_16_OFFSET
4492 ENUMDOC
4493   This is a 16 bit offset from the tiny data area pointer.
4494 COMMENT
4495 ENUM
4496   BFD_RELOC_V850_TDA_4_5_OFFSET
4497 ENUMDOC
4498   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4499   data area pointer.
4500 ENUM
4501   BFD_RELOC_V850_TDA_4_4_OFFSET
4502 ENUMDOC
4503   This is a 4 bit offset from the tiny data area pointer.
4504 ENUM
4505   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4506 ENUMDOC
4507   This is a 16 bit offset from the short data area pointer, with the
4508   bits placed non-contiguously in the instruction.
4509 ENUM
4510   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4511 ENUMDOC
4512   This is a 16 bit offset from the zero data area pointer, with the
4513   bits placed non-contiguously in the instruction.
4514 ENUM
4515   BFD_RELOC_V850_CALLT_6_7_OFFSET
4516 ENUMDOC
4517   This is a 6 bit offset from the call table base pointer.
4518 ENUM
4519   BFD_RELOC_V850_CALLT_16_16_OFFSET
4520 ENUMDOC
4521   This is a 16 bit offset from the call table base pointer.
4522 ENUM
4523   BFD_RELOC_V850_LONGCALL
4524 ENUMDOC
4525   Used for relaxing indirect function calls.
4526 ENUM
4527   BFD_RELOC_V850_LONGJUMP
4528 ENUMDOC
4529   Used for relaxing indirect jumps.
4530 ENUM
4531   BFD_RELOC_V850_ALIGN
4532 ENUMDOC
4533   Used to maintain alignment whilst relaxing.
4534 ENUM
4535   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4536 ENUMDOC
4537   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4538   instructions.
4539 ENUM
4540   BFD_RELOC_V850_16_PCREL
4541 ENUMDOC
4542   This is a 16-bit reloc.
4543 ENUM
4544   BFD_RELOC_V850_17_PCREL
4545 ENUMDOC
4546   This is a 17-bit reloc.
4547 ENUM
4548   BFD_RELOC_V850_23
4549 ENUMDOC
4550   This is a 23-bit reloc.
4551 ENUM
4552   BFD_RELOC_V850_32_PCREL
4553 ENUMDOC
4554   This is a 32-bit reloc.
4555 ENUM
4556   BFD_RELOC_V850_32_ABS
4557 ENUMDOC
4558   This is a 32-bit reloc.
4559 ENUM
4560   BFD_RELOC_V850_16_SPLIT_OFFSET
4561 ENUMDOC
4562   This is a 16-bit reloc.
4563 ENUM
4564   BFD_RELOC_V850_16_S1
4565 ENUMDOC
4566   This is a 16-bit reloc.
4567 ENUM
4568   BFD_RELOC_V850_LO16_S1
4569 ENUMDOC
4570   Low 16 bits. 16 bit shifted by 1.
4571 ENUM
4572   BFD_RELOC_V850_CALLT_15_16_OFFSET
4573 ENUMDOC
4574   This is a 16 bit offset from the call table base pointer.
4575 ENUM
4576   BFD_RELOC_V850_32_GOTPCREL
4577 ENUMDOC
4578   DSO relocations.
4579 ENUM
4580   BFD_RELOC_V850_16_GOT
4581 ENUMDOC
4582   DSO relocations.
4583 ENUM
4584   BFD_RELOC_V850_32_GOT
4585 ENUMDOC
4586   DSO relocations.
4587 ENUM
4588   BFD_RELOC_V850_22_PLT_PCREL
4589 ENUMDOC
4590   DSO relocations.
4591 ENUM
4592   BFD_RELOC_V850_32_PLT_PCREL
4593 ENUMDOC
4594   DSO relocations.
4595 ENUM
4596   BFD_RELOC_V850_COPY
4597 ENUMDOC
4598   DSO relocations.
4599 ENUM
4600   BFD_RELOC_V850_GLOB_DAT
4601 ENUMDOC
4602   DSO relocations.
4603 ENUM
4604   BFD_RELOC_V850_JMP_SLOT
4605 ENUMDOC
4606   DSO relocations.
4607 ENUM
4608   BFD_RELOC_V850_RELATIVE
4609 ENUMDOC
4610   DSO relocations.
4611 ENUM
4612   BFD_RELOC_V850_16_GOTOFF
4613 ENUMDOC
4614   DSO relocations.
4615 ENUM
4616   BFD_RELOC_V850_32_GOTOFF
4617 ENUMDOC
4618   DSO relocations.
4619 ENUM
4620   BFD_RELOC_V850_CODE
4621 ENUMDOC
4622   start code.
4623 ENUM
4624   BFD_RELOC_V850_DATA
4625 ENUMDOC
4626   start data in text.
4627
4628 ENUM
4629   BFD_RELOC_TIC30_LDP
4630 ENUMDOC
4631   This is a 8bit DP reloc for the tms320c30, where the most
4632   significant 8 bits of a 24 bit word are placed into the least
4633   significant 8 bits of the opcode.
4634
4635 ENUM
4636   BFD_RELOC_TIC54X_PARTLS7
4637 ENUMDOC
4638   This is a 7bit reloc for the tms320c54x, where the least
4639   significant 7 bits of a 16 bit word are placed into the least
4640   significant 7 bits of the opcode.
4641
4642 ENUM
4643   BFD_RELOC_TIC54X_PARTMS9
4644 ENUMDOC
4645   This is a 9bit DP reloc for the tms320c54x, where the most
4646   significant 9 bits of a 16 bit word are placed into the least
4647   significant 9 bits of the opcode.
4648
4649 ENUM
4650   BFD_RELOC_TIC54X_23
4651 ENUMDOC
4652   This is an extended address 23-bit reloc for the tms320c54x.
4653
4654 ENUM
4655   BFD_RELOC_TIC54X_16_OF_23
4656 ENUMDOC
4657   This is a 16-bit reloc for the tms320c54x, where the least
4658   significant 16 bits of a 23-bit extended address are placed into
4659   the opcode.
4660
4661 ENUM
4662   BFD_RELOC_TIC54X_MS7_OF_23
4663 ENUMDOC
4664   This is a reloc for the tms320c54x, where the most
4665   significant 7 bits of a 23-bit extended address are placed into
4666   the opcode.
4667
4668 ENUM
4669   BFD_RELOC_C6000_PCR_S21
4670 ENUMX
4671   BFD_RELOC_C6000_PCR_S12
4672 ENUMX
4673   BFD_RELOC_C6000_PCR_S10
4674 ENUMX
4675   BFD_RELOC_C6000_PCR_S7
4676 ENUMX
4677   BFD_RELOC_C6000_ABS_S16
4678 ENUMX
4679   BFD_RELOC_C6000_ABS_L16
4680 ENUMX
4681   BFD_RELOC_C6000_ABS_H16
4682 ENUMX
4683   BFD_RELOC_C6000_SBR_U15_B
4684 ENUMX
4685   BFD_RELOC_C6000_SBR_U15_H
4686 ENUMX
4687   BFD_RELOC_C6000_SBR_U15_W
4688 ENUMX
4689   BFD_RELOC_C6000_SBR_S16
4690 ENUMX
4691   BFD_RELOC_C6000_SBR_L16_B
4692 ENUMX
4693   BFD_RELOC_C6000_SBR_L16_H
4694 ENUMX
4695   BFD_RELOC_C6000_SBR_L16_W
4696 ENUMX
4697   BFD_RELOC_C6000_SBR_H16_B
4698 ENUMX
4699   BFD_RELOC_C6000_SBR_H16_H
4700 ENUMX
4701   BFD_RELOC_C6000_SBR_H16_W
4702 ENUMX
4703   BFD_RELOC_C6000_SBR_GOT_U15_W
4704 ENUMX
4705   BFD_RELOC_C6000_SBR_GOT_L16_W
4706 ENUMX
4707   BFD_RELOC_C6000_SBR_GOT_H16_W
4708 ENUMX
4709   BFD_RELOC_C6000_DSBT_INDEX
4710 ENUMX
4711   BFD_RELOC_C6000_PREL31
4712 ENUMX
4713   BFD_RELOC_C6000_COPY
4714 ENUMX
4715   BFD_RELOC_C6000_JUMP_SLOT
4716 ENUMX
4717   BFD_RELOC_C6000_EHTYPE
4718 ENUMX
4719   BFD_RELOC_C6000_PCR_H16
4720 ENUMX
4721   BFD_RELOC_C6000_PCR_L16
4722 ENUMX
4723   BFD_RELOC_C6000_ALIGN
4724 ENUMX
4725   BFD_RELOC_C6000_FPHEAD
4726 ENUMX
4727   BFD_RELOC_C6000_NOCMP
4728 ENUMDOC
4729   TMS320C6000 relocations.
4730
4731 ENUM
4732   BFD_RELOC_FR30_48
4733 ENUMDOC
4734   This is a 48 bit reloc for the FR30 that stores 32 bits.
4735 ENUM
4736   BFD_RELOC_FR30_20
4737 ENUMDOC
4738   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4739   two sections.
4740 ENUM
4741   BFD_RELOC_FR30_6_IN_4
4742 ENUMDOC
4743   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4744   4 bits.
4745 ENUM
4746   BFD_RELOC_FR30_8_IN_8
4747 ENUMDOC
4748   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4749   into 8 bits.
4750 ENUM
4751   BFD_RELOC_FR30_9_IN_8
4752 ENUMDOC
4753   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4754   into 8 bits.
4755 ENUM
4756   BFD_RELOC_FR30_10_IN_8
4757 ENUMDOC
4758   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4759   into 8 bits.
4760 ENUM
4761   BFD_RELOC_FR30_9_PCREL
4762 ENUMDOC
4763   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4764   short offset into 8 bits.
4765 ENUM
4766   BFD_RELOC_FR30_12_PCREL
4767 ENUMDOC
4768   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4769   short offset into 11 bits.
4770
4771 ENUM
4772   BFD_RELOC_MCORE_PCREL_IMM8BY4
4773 ENUMX
4774   BFD_RELOC_MCORE_PCREL_IMM11BY2
4775 ENUMX
4776   BFD_RELOC_MCORE_PCREL_IMM4BY2
4777 ENUMX
4778   BFD_RELOC_MCORE_PCREL_32
4779 ENUMX
4780   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4781 ENUMX
4782   BFD_RELOC_MCORE_RVA
4783 ENUMDOC
4784   Motorola Mcore relocations.
4785
4786 ENUM
4787   BFD_RELOC_MEP_8
4788 ENUMX
4789   BFD_RELOC_MEP_16
4790 ENUMX
4791   BFD_RELOC_MEP_32
4792 ENUMX
4793   BFD_RELOC_MEP_PCREL8A2
4794 ENUMX
4795   BFD_RELOC_MEP_PCREL12A2
4796 ENUMX
4797   BFD_RELOC_MEP_PCREL17A2
4798 ENUMX
4799   BFD_RELOC_MEP_PCREL24A2
4800 ENUMX
4801   BFD_RELOC_MEP_PCABS24A2
4802 ENUMX
4803   BFD_RELOC_MEP_LOW16
4804 ENUMX
4805   BFD_RELOC_MEP_HI16U
4806 ENUMX
4807   BFD_RELOC_MEP_HI16S
4808 ENUMX
4809   BFD_RELOC_MEP_GPREL
4810 ENUMX
4811   BFD_RELOC_MEP_TPREL
4812 ENUMX
4813   BFD_RELOC_MEP_TPREL7
4814 ENUMX
4815   BFD_RELOC_MEP_TPREL7A2
4816 ENUMX
4817   BFD_RELOC_MEP_TPREL7A4
4818 ENUMX
4819   BFD_RELOC_MEP_UIMM24
4820 ENUMX
4821   BFD_RELOC_MEP_ADDR24A4
4822 ENUMX
4823   BFD_RELOC_MEP_GNU_VTINHERIT
4824 ENUMX
4825   BFD_RELOC_MEP_GNU_VTENTRY
4826 ENUMDOC
4827   Toshiba Media Processor Relocations.
4828 COMMENT
4829
4830 ENUM
4831   BFD_RELOC_METAG_HIADDR16
4832 ENUMX
4833   BFD_RELOC_METAG_LOADDR16
4834 ENUMX
4835   BFD_RELOC_METAG_RELBRANCH
4836 ENUMX
4837   BFD_RELOC_METAG_GETSETOFF
4838 ENUMX
4839   BFD_RELOC_METAG_HIOG
4840 ENUMX
4841   BFD_RELOC_METAG_LOOG
4842 ENUMX
4843   BFD_RELOC_METAG_REL8
4844 ENUMX
4845   BFD_RELOC_METAG_REL16
4846 ENUMX
4847   BFD_RELOC_METAG_HI16_GOTOFF
4848 ENUMX
4849   BFD_RELOC_METAG_LO16_GOTOFF
4850 ENUMX
4851   BFD_RELOC_METAG_GETSET_GOTOFF
4852 ENUMX
4853   BFD_RELOC_METAG_GETSET_GOT
4854 ENUMX
4855   BFD_RELOC_METAG_HI16_GOTPC
4856 ENUMX
4857   BFD_RELOC_METAG_LO16_GOTPC
4858 ENUMX
4859   BFD_RELOC_METAG_HI16_PLT
4860 ENUMX
4861   BFD_RELOC_METAG_LO16_PLT
4862 ENUMX
4863   BFD_RELOC_METAG_RELBRANCH_PLT
4864 ENUMX
4865   BFD_RELOC_METAG_GOTOFF
4866 ENUMX
4867   BFD_RELOC_METAG_PLT
4868 ENUMX
4869   BFD_RELOC_METAG_COPY
4870 ENUMX
4871   BFD_RELOC_METAG_JMP_SLOT
4872 ENUMX
4873   BFD_RELOC_METAG_RELATIVE
4874 ENUMX
4875   BFD_RELOC_METAG_GLOB_DAT
4876 ENUMX
4877   BFD_RELOC_METAG_TLS_GD
4878 ENUMX
4879   BFD_RELOC_METAG_TLS_LDM
4880 ENUMX
4881   BFD_RELOC_METAG_TLS_LDO_HI16
4882 ENUMX
4883   BFD_RELOC_METAG_TLS_LDO_LO16
4884 ENUMX
4885   BFD_RELOC_METAG_TLS_LDO
4886 ENUMX
4887   BFD_RELOC_METAG_TLS_IE
4888 ENUMX
4889   BFD_RELOC_METAG_TLS_IENONPIC
4890 ENUMX
4891   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4892 ENUMX
4893   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4894 ENUMX
4895   BFD_RELOC_METAG_TLS_TPOFF
4896 ENUMX
4897   BFD_RELOC_METAG_TLS_DTPMOD
4898 ENUMX
4899   BFD_RELOC_METAG_TLS_DTPOFF
4900 ENUMX
4901   BFD_RELOC_METAG_TLS_LE
4902 ENUMX
4903   BFD_RELOC_METAG_TLS_LE_HI16
4904 ENUMX
4905   BFD_RELOC_METAG_TLS_LE_LO16
4906 ENUMDOC
4907   Imagination Technologies Meta relocations.
4908
4909 ENUM
4910   BFD_RELOC_MMIX_GETA
4911 ENUMX
4912   BFD_RELOC_MMIX_GETA_1
4913 ENUMX
4914   BFD_RELOC_MMIX_GETA_2
4915 ENUMX
4916   BFD_RELOC_MMIX_GETA_3
4917 ENUMDOC
4918   These are relocations for the GETA instruction.
4919 ENUM
4920   BFD_RELOC_MMIX_CBRANCH
4921 ENUMX
4922   BFD_RELOC_MMIX_CBRANCH_J
4923 ENUMX
4924   BFD_RELOC_MMIX_CBRANCH_1
4925 ENUMX
4926   BFD_RELOC_MMIX_CBRANCH_2
4927 ENUMX
4928   BFD_RELOC_MMIX_CBRANCH_3
4929 ENUMDOC
4930   These are relocations for a conditional branch instruction.
4931 ENUM
4932   BFD_RELOC_MMIX_PUSHJ
4933 ENUMX
4934   BFD_RELOC_MMIX_PUSHJ_1
4935 ENUMX
4936   BFD_RELOC_MMIX_PUSHJ_2
4937 ENUMX
4938   BFD_RELOC_MMIX_PUSHJ_3
4939 ENUMX
4940   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4941 ENUMDOC
4942   These are relocations for the PUSHJ instruction.
4943 ENUM
4944   BFD_RELOC_MMIX_JMP
4945 ENUMX
4946   BFD_RELOC_MMIX_JMP_1
4947 ENUMX
4948   BFD_RELOC_MMIX_JMP_2
4949 ENUMX
4950   BFD_RELOC_MMIX_JMP_3
4951 ENUMDOC
4952   These are relocations for the JMP instruction.
4953 ENUM
4954   BFD_RELOC_MMIX_ADDR19
4955 ENUMDOC
4956   This is a relocation for a relative address as in a GETA instruction or
4957   a branch.
4958 ENUM
4959   BFD_RELOC_MMIX_ADDR27
4960 ENUMDOC
4961   This is a relocation for a relative address as in a JMP instruction.
4962 ENUM
4963   BFD_RELOC_MMIX_REG_OR_BYTE
4964 ENUMDOC
4965   This is a relocation for an instruction field that may be a general
4966   register or a value 0..255.
4967 ENUM
4968   BFD_RELOC_MMIX_REG
4969 ENUMDOC
4970   This is a relocation for an instruction field that may be a general
4971   register.
4972 ENUM
4973   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4974 ENUMDOC
4975   This is a relocation for two instruction fields holding a register and
4976   an offset, the equivalent of the relocation.
4977 ENUM
4978   BFD_RELOC_MMIX_LOCAL
4979 ENUMDOC
4980   This relocation is an assertion that the expression is not allocated as
4981   a global register.  It does not modify contents.
4982
4983 ENUM
4984   BFD_RELOC_AVR_7_PCREL
4985 ENUMDOC
4986   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4987   short offset into 7 bits.
4988 ENUM
4989   BFD_RELOC_AVR_13_PCREL
4990 ENUMDOC
4991   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4992   short offset into 12 bits.
4993 ENUM
4994   BFD_RELOC_AVR_16_PM
4995 ENUMDOC
4996   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4997   program memory address) into 16 bits.
4998 ENUM
4999   BFD_RELOC_AVR_LO8_LDI
5000 ENUMDOC
5001   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
5002   data memory address) into 8 bit immediate value of LDI insn.
5003 ENUM
5004   BFD_RELOC_AVR_HI8_LDI
5005 ENUMDOC
5006   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5007   of data memory address) into 8 bit immediate value of LDI insn.
5008 ENUM
5009   BFD_RELOC_AVR_HH8_LDI
5010 ENUMDOC
5011   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5012   of program memory address) into 8 bit immediate value of LDI insn.
5013 ENUM
5014   BFD_RELOC_AVR_MS8_LDI
5015 ENUMDOC
5016   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5017   of 32 bit value) into 8 bit immediate value of LDI insn.
5018 ENUM
5019   BFD_RELOC_AVR_LO8_LDI_NEG
5020 ENUMDOC
5021   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5022   (usually data memory address) into 8 bit immediate value of SUBI insn.
5023 ENUM
5024   BFD_RELOC_AVR_HI8_LDI_NEG
5025 ENUMDOC
5026   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5027   (high 8 bit of data memory address) into 8 bit immediate value of
5028   SUBI insn.
5029 ENUM
5030   BFD_RELOC_AVR_HH8_LDI_NEG
5031 ENUMDOC
5032   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5033   (most high 8 bit of program memory address) into 8 bit immediate value
5034   of LDI or SUBI insn.
5035 ENUM
5036   BFD_RELOC_AVR_MS8_LDI_NEG
5037 ENUMDOC
5038   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
5039   of 32 bit value) into 8 bit immediate value of LDI insn.
5040 ENUM
5041   BFD_RELOC_AVR_LO8_LDI_PM
5042 ENUMDOC
5043   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
5044   command address) into 8 bit immediate value of LDI insn.
5045 ENUM
5046   BFD_RELOC_AVR_LO8_LDI_GS
5047 ENUMDOC
5048   This is a 16 bit reloc for the AVR that stores 8 bit value
5049   (command address) into 8 bit immediate value of LDI insn. If the address
5050   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5051   in the lower 128k.
5052 ENUM
5053   BFD_RELOC_AVR_HI8_LDI_PM
5054 ENUMDOC
5055   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5056   of command address) into 8 bit immediate value of LDI insn.
5057 ENUM
5058   BFD_RELOC_AVR_HI8_LDI_GS
5059 ENUMDOC
5060   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5061   of command address) into 8 bit immediate value of LDI insn.  If the address
5062   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5063   below 128k.
5064 ENUM
5065   BFD_RELOC_AVR_HH8_LDI_PM
5066 ENUMDOC
5067   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5068   of command address) into 8 bit immediate value of LDI insn.
5069 ENUM
5070   BFD_RELOC_AVR_LO8_LDI_PM_NEG
5071 ENUMDOC
5072   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5073   (usually command address) into 8 bit immediate value of SUBI insn.
5074 ENUM
5075   BFD_RELOC_AVR_HI8_LDI_PM_NEG
5076 ENUMDOC
5077   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5078   (high 8 bit of 16 bit command address) into 8 bit immediate value
5079   of SUBI insn.
5080 ENUM
5081   BFD_RELOC_AVR_HH8_LDI_PM_NEG
5082 ENUMDOC
5083   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5084   (high 6 bit of 22 bit command address) into 8 bit immediate
5085   value of SUBI insn.
5086 ENUM
5087   BFD_RELOC_AVR_CALL
5088 ENUMDOC
5089   This is a 32 bit reloc for the AVR that stores 23 bit value
5090   into 22 bits.
5091 ENUM
5092   BFD_RELOC_AVR_LDI
5093 ENUMDOC
5094   This is a 16 bit reloc for the AVR that stores all needed bits
5095   for absolute addressing with ldi with overflow check to linktime
5096 ENUM
5097   BFD_RELOC_AVR_6
5098 ENUMDOC
5099   This is a 6 bit reloc for the AVR that stores offset for ldd/std
5100   instructions
5101 ENUM
5102   BFD_RELOC_AVR_6_ADIW
5103 ENUMDOC
5104   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
5105   instructions
5106 ENUM
5107   BFD_RELOC_AVR_8_LO
5108 ENUMDOC
5109   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5110   in .byte lo8(symbol)
5111 ENUM
5112   BFD_RELOC_AVR_8_HI
5113 ENUMDOC
5114   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5115   in .byte hi8(symbol)
5116 ENUM
5117   BFD_RELOC_AVR_8_HLO
5118 ENUMDOC
5119   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5120   in .byte hlo8(symbol)
5121 ENUM
5122   BFD_RELOC_AVR_DIFF8
5123 ENUMX
5124   BFD_RELOC_AVR_DIFF16
5125 ENUMX
5126   BFD_RELOC_AVR_DIFF32
5127 ENUMDOC
5128   AVR relocations to mark the difference of two local symbols.
5129   These are only needed to support linker relaxation and can be ignored
5130   when not relaxing.  The field is set to the value of the difference
5131   assuming no relaxation.  The relocation encodes the position of the
5132   second symbol so the linker can determine whether to adjust the field
5133   value.
5134 ENUM
5135   BFD_RELOC_AVR_LDS_STS_16
5136 ENUMDOC
5137   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5138   lds and sts instructions supported only tiny core.
5139 ENUM
5140   BFD_RELOC_AVR_PORT6
5141 ENUMDOC
5142   This is a 6 bit reloc for the AVR that stores an I/O register
5143   number for the IN and OUT instructions
5144 ENUM
5145   BFD_RELOC_AVR_PORT5
5146 ENUMDOC
5147   This is a 5 bit reloc for the AVR that stores an I/O register
5148   number for the SBIC, SBIS, SBI and CBI instructions
5149
5150 ENUM
5151   BFD_RELOC_RISCV_HI20
5152 ENUMX
5153   BFD_RELOC_RISCV_PCREL_HI20
5154 ENUMX
5155   BFD_RELOC_RISCV_PCREL_LO12_I
5156 ENUMX
5157   BFD_RELOC_RISCV_PCREL_LO12_S
5158 ENUMX
5159   BFD_RELOC_RISCV_LO12_I
5160 ENUMX
5161   BFD_RELOC_RISCV_LO12_S
5162 ENUMX
5163   BFD_RELOC_RISCV_GPREL12_I
5164 ENUMX
5165   BFD_RELOC_RISCV_GPREL12_S
5166 ENUMX
5167   BFD_RELOC_RISCV_TPREL_HI20
5168 ENUMX
5169   BFD_RELOC_RISCV_TPREL_LO12_I
5170 ENUMX
5171   BFD_RELOC_RISCV_TPREL_LO12_S
5172 ENUMX
5173   BFD_RELOC_RISCV_TPREL_ADD
5174 ENUMX
5175   BFD_RELOC_RISCV_CALL
5176 ENUMX
5177   BFD_RELOC_RISCV_CALL_PLT
5178 ENUMX
5179   BFD_RELOC_RISCV_ADD8
5180 ENUMX
5181   BFD_RELOC_RISCV_ADD16
5182 ENUMX
5183   BFD_RELOC_RISCV_ADD32
5184 ENUMX
5185   BFD_RELOC_RISCV_ADD64
5186 ENUMX
5187   BFD_RELOC_RISCV_SUB8
5188 ENUMX
5189   BFD_RELOC_RISCV_SUB16
5190 ENUMX
5191   BFD_RELOC_RISCV_SUB32
5192 ENUMX
5193   BFD_RELOC_RISCV_SUB64
5194 ENUMX
5195   BFD_RELOC_RISCV_GOT_HI20
5196 ENUMX
5197   BFD_RELOC_RISCV_TLS_GOT_HI20
5198 ENUMX
5199   BFD_RELOC_RISCV_TLS_GD_HI20
5200 ENUMX
5201   BFD_RELOC_RISCV_JMP
5202 ENUMX
5203   BFD_RELOC_RISCV_TLS_DTPMOD32
5204 ENUMX
5205   BFD_RELOC_RISCV_TLS_DTPREL32
5206 ENUMX
5207   BFD_RELOC_RISCV_TLS_DTPMOD64
5208 ENUMX
5209   BFD_RELOC_RISCV_TLS_DTPREL64
5210 ENUMX
5211   BFD_RELOC_RISCV_TLS_TPREL32
5212 ENUMX
5213   BFD_RELOC_RISCV_TLS_TPREL64
5214 ENUMX
5215   BFD_RELOC_RISCV_ALIGN
5216 ENUMX
5217   BFD_RELOC_RISCV_RVC_BRANCH
5218 ENUMX
5219   BFD_RELOC_RISCV_RVC_JUMP
5220 ENUMX
5221   BFD_RELOC_RISCV_RVC_LUI
5222 ENUMX
5223   BFD_RELOC_RISCV_GPREL_I
5224 ENUMX
5225   BFD_RELOC_RISCV_GPREL_S
5226 ENUMX
5227   BFD_RELOC_RISCV_TPREL_I
5228 ENUMX
5229   BFD_RELOC_RISCV_TPREL_S
5230 ENUMX
5231   BFD_RELOC_RISCV_RELAX
5232 ENUMX
5233   BFD_RELOC_RISCV_CFA
5234 ENUMX
5235   BFD_RELOC_RISCV_SUB6
5236 ENUMX
5237   BFD_RELOC_RISCV_SET6
5238 ENUMX
5239   BFD_RELOC_RISCV_SET8
5240 ENUMX
5241   BFD_RELOC_RISCV_SET16
5242 ENUMX
5243   BFD_RELOC_RISCV_SET32
5244 ENUMX
5245   BFD_RELOC_RISCV_32_PCREL
5246 ENUMDOC
5247   RISC-V relocations.
5248
5249 ENUM
5250   BFD_RELOC_RL78_NEG8
5251 ENUMX
5252   BFD_RELOC_RL78_NEG16
5253 ENUMX
5254   BFD_RELOC_RL78_NEG24
5255 ENUMX
5256   BFD_RELOC_RL78_NEG32
5257 ENUMX
5258   BFD_RELOC_RL78_16_OP
5259 ENUMX
5260   BFD_RELOC_RL78_24_OP
5261 ENUMX
5262   BFD_RELOC_RL78_32_OP
5263 ENUMX
5264   BFD_RELOC_RL78_8U
5265 ENUMX
5266   BFD_RELOC_RL78_16U
5267 ENUMX
5268   BFD_RELOC_RL78_24U
5269 ENUMX
5270   BFD_RELOC_RL78_DIR3U_PCREL
5271 ENUMX
5272   BFD_RELOC_RL78_DIFF
5273 ENUMX
5274   BFD_RELOC_RL78_GPRELB
5275 ENUMX
5276   BFD_RELOC_RL78_GPRELW
5277 ENUMX
5278   BFD_RELOC_RL78_GPRELL
5279 ENUMX
5280   BFD_RELOC_RL78_SYM
5281 ENUMX
5282   BFD_RELOC_RL78_OP_SUBTRACT
5283 ENUMX
5284   BFD_RELOC_RL78_OP_NEG
5285 ENUMX
5286   BFD_RELOC_RL78_OP_AND
5287 ENUMX
5288   BFD_RELOC_RL78_OP_SHRA
5289 ENUMX
5290   BFD_RELOC_RL78_ABS8
5291 ENUMX
5292   BFD_RELOC_RL78_ABS16
5293 ENUMX
5294   BFD_RELOC_RL78_ABS16_REV
5295 ENUMX
5296   BFD_RELOC_RL78_ABS32
5297 ENUMX
5298   BFD_RELOC_RL78_ABS32_REV
5299 ENUMX
5300   BFD_RELOC_RL78_ABS16U
5301 ENUMX
5302   BFD_RELOC_RL78_ABS16UW
5303 ENUMX
5304   BFD_RELOC_RL78_ABS16UL
5305 ENUMX
5306   BFD_RELOC_RL78_RELAX
5307 ENUMX
5308   BFD_RELOC_RL78_HI16
5309 ENUMX
5310   BFD_RELOC_RL78_HI8
5311 ENUMX
5312   BFD_RELOC_RL78_LO16
5313 ENUMX
5314   BFD_RELOC_RL78_CODE
5315 ENUMX
5316   BFD_RELOC_RL78_SADDR
5317 ENUMDOC
5318   Renesas RL78 Relocations.
5319
5320 ENUM
5321   BFD_RELOC_RX_NEG8
5322 ENUMX
5323   BFD_RELOC_RX_NEG16
5324 ENUMX
5325   BFD_RELOC_RX_NEG24
5326 ENUMX
5327   BFD_RELOC_RX_NEG32
5328 ENUMX
5329   BFD_RELOC_RX_16_OP
5330 ENUMX
5331   BFD_RELOC_RX_24_OP
5332 ENUMX
5333   BFD_RELOC_RX_32_OP
5334 ENUMX
5335   BFD_RELOC_RX_8U
5336 ENUMX
5337   BFD_RELOC_RX_16U
5338 ENUMX
5339   BFD_RELOC_RX_24U
5340 ENUMX
5341   BFD_RELOC_RX_DIR3U_PCREL
5342 ENUMX
5343   BFD_RELOC_RX_DIFF
5344 ENUMX
5345   BFD_RELOC_RX_GPRELB
5346 ENUMX
5347   BFD_RELOC_RX_GPRELW
5348 ENUMX
5349   BFD_RELOC_RX_GPRELL
5350 ENUMX
5351   BFD_RELOC_RX_SYM
5352 ENUMX
5353   BFD_RELOC_RX_OP_SUBTRACT
5354 ENUMX
5355   BFD_RELOC_RX_OP_NEG
5356 ENUMX
5357   BFD_RELOC_RX_ABS8
5358 ENUMX
5359   BFD_RELOC_RX_ABS16
5360 ENUMX
5361   BFD_RELOC_RX_ABS16_REV
5362 ENUMX
5363   BFD_RELOC_RX_ABS32
5364 ENUMX
5365   BFD_RELOC_RX_ABS32_REV
5366 ENUMX
5367   BFD_RELOC_RX_ABS16U
5368 ENUMX
5369   BFD_RELOC_RX_ABS16UW
5370 ENUMX
5371   BFD_RELOC_RX_ABS16UL
5372 ENUMX
5373   BFD_RELOC_RX_RELAX
5374 ENUMDOC
5375   Renesas RX Relocations.
5376
5377 ENUM
5378   BFD_RELOC_390_12
5379 ENUMDOC
5380    Direct 12 bit.
5381 ENUM
5382   BFD_RELOC_390_GOT12
5383 ENUMDOC
5384   12 bit GOT offset.
5385 ENUM
5386   BFD_RELOC_390_PLT32
5387 ENUMDOC
5388   32 bit PC relative PLT address.
5389 ENUM
5390   BFD_RELOC_390_COPY
5391 ENUMDOC
5392   Copy symbol at runtime.
5393 ENUM
5394   BFD_RELOC_390_GLOB_DAT
5395 ENUMDOC
5396   Create GOT entry.
5397 ENUM
5398   BFD_RELOC_390_JMP_SLOT
5399 ENUMDOC
5400   Create PLT entry.
5401 ENUM
5402   BFD_RELOC_390_RELATIVE
5403 ENUMDOC
5404   Adjust by program base.
5405 ENUM
5406   BFD_RELOC_390_GOTPC
5407 ENUMDOC
5408   32 bit PC relative offset to GOT.
5409 ENUM
5410   BFD_RELOC_390_GOT16
5411 ENUMDOC
5412   16 bit GOT offset.
5413 ENUM
5414   BFD_RELOC_390_PC12DBL
5415 ENUMDOC
5416   PC relative 12 bit shifted by 1.
5417 ENUM
5418   BFD_RELOC_390_PLT12DBL
5419 ENUMDOC
5420   12 bit PC rel. PLT shifted by 1.
5421 ENUM
5422   BFD_RELOC_390_PC16DBL
5423 ENUMDOC
5424   PC relative 16 bit shifted by 1.
5425 ENUM
5426   BFD_RELOC_390_PLT16DBL
5427 ENUMDOC
5428   16 bit PC rel. PLT shifted by 1.
5429 ENUM
5430   BFD_RELOC_390_PC24DBL
5431 ENUMDOC
5432   PC relative 24 bit shifted by 1.
5433 ENUM
5434   BFD_RELOC_390_PLT24DBL
5435 ENUMDOC
5436   24 bit PC rel. PLT shifted by 1.
5437 ENUM
5438   BFD_RELOC_390_PC32DBL
5439 ENUMDOC
5440   PC relative 32 bit shifted by 1.
5441 ENUM
5442   BFD_RELOC_390_PLT32DBL
5443 ENUMDOC
5444   32 bit PC rel. PLT shifted by 1.
5445 ENUM
5446   BFD_RELOC_390_GOTPCDBL
5447 ENUMDOC
5448   32 bit PC rel. GOT shifted by 1.
5449 ENUM
5450   BFD_RELOC_390_GOT64
5451 ENUMDOC
5452   64 bit GOT offset.
5453 ENUM
5454   BFD_RELOC_390_PLT64
5455 ENUMDOC
5456   64 bit PC relative PLT address.
5457 ENUM
5458   BFD_RELOC_390_GOTENT
5459 ENUMDOC
5460   32 bit rel. offset to GOT entry.
5461 ENUM
5462   BFD_RELOC_390_GOTOFF64
5463 ENUMDOC
5464   64 bit offset to GOT.
5465 ENUM
5466   BFD_RELOC_390_GOTPLT12
5467 ENUMDOC
5468   12-bit offset to symbol-entry within GOT, with PLT handling.
5469 ENUM
5470   BFD_RELOC_390_GOTPLT16
5471 ENUMDOC
5472   16-bit offset to symbol-entry within GOT, with PLT handling.
5473 ENUM
5474   BFD_RELOC_390_GOTPLT32
5475 ENUMDOC
5476   32-bit offset to symbol-entry within GOT, with PLT handling.
5477 ENUM
5478   BFD_RELOC_390_GOTPLT64
5479 ENUMDOC
5480   64-bit offset to symbol-entry within GOT, with PLT handling.
5481 ENUM
5482   BFD_RELOC_390_GOTPLTENT
5483 ENUMDOC
5484   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5485 ENUM
5486   BFD_RELOC_390_PLTOFF16
5487 ENUMDOC
5488   16-bit rel. offset from the GOT to a PLT entry.
5489 ENUM
5490   BFD_RELOC_390_PLTOFF32
5491 ENUMDOC
5492   32-bit rel. offset from the GOT to a PLT entry.
5493 ENUM
5494   BFD_RELOC_390_PLTOFF64
5495 ENUMDOC
5496   64-bit rel. offset from the GOT to a PLT entry.
5497
5498 ENUM
5499   BFD_RELOC_390_TLS_LOAD
5500 ENUMX
5501   BFD_RELOC_390_TLS_GDCALL
5502 ENUMX
5503   BFD_RELOC_390_TLS_LDCALL
5504 ENUMX
5505   BFD_RELOC_390_TLS_GD32
5506 ENUMX
5507   BFD_RELOC_390_TLS_GD64
5508 ENUMX
5509   BFD_RELOC_390_TLS_GOTIE12
5510 ENUMX
5511   BFD_RELOC_390_TLS_GOTIE32
5512 ENUMX
5513   BFD_RELOC_390_TLS_GOTIE64
5514 ENUMX
5515   BFD_RELOC_390_TLS_LDM32
5516 ENUMX
5517   BFD_RELOC_390_TLS_LDM64
5518 ENUMX
5519   BFD_RELOC_390_TLS_IE32
5520 ENUMX
5521   BFD_RELOC_390_TLS_IE64
5522 ENUMX
5523   BFD_RELOC_390_TLS_IEENT
5524 ENUMX
5525   BFD_RELOC_390_TLS_LE32
5526 ENUMX
5527   BFD_RELOC_390_TLS_LE64
5528 ENUMX
5529   BFD_RELOC_390_TLS_LDO32
5530 ENUMX
5531   BFD_RELOC_390_TLS_LDO64
5532 ENUMX
5533   BFD_RELOC_390_TLS_DTPMOD
5534 ENUMX
5535   BFD_RELOC_390_TLS_DTPOFF
5536 ENUMX
5537   BFD_RELOC_390_TLS_TPOFF
5538 ENUMDOC
5539   s390 tls relocations.
5540
5541 ENUM
5542   BFD_RELOC_390_20
5543 ENUMX
5544   BFD_RELOC_390_GOT20
5545 ENUMX
5546   BFD_RELOC_390_GOTPLT20
5547 ENUMX
5548   BFD_RELOC_390_TLS_GOTIE20
5549 ENUMDOC
5550   Long displacement extension.
5551
5552 ENUM
5553   BFD_RELOC_390_IRELATIVE
5554 ENUMDOC
5555   STT_GNU_IFUNC relocation.
5556
5557 ENUM
5558   BFD_RELOC_SCORE_GPREL15
5559 ENUMDOC
5560   Score relocations
5561   Low 16 bit for load/store
5562 ENUM
5563   BFD_RELOC_SCORE_DUMMY2
5564 ENUMX
5565   BFD_RELOC_SCORE_JMP
5566 ENUMDOC
5567   This is a 24-bit reloc with the right 1 bit assumed to be 0
5568 ENUM
5569   BFD_RELOC_SCORE_BRANCH
5570 ENUMDOC
5571   This is a 19-bit reloc with the right 1 bit assumed to be 0
5572 ENUM
5573   BFD_RELOC_SCORE_IMM30
5574 ENUMDOC
5575   This is a 32-bit reloc for 48-bit instructions.
5576 ENUM
5577   BFD_RELOC_SCORE_IMM32
5578 ENUMDOC
5579   This is a 32-bit reloc for 48-bit instructions.
5580 ENUM
5581   BFD_RELOC_SCORE16_JMP
5582 ENUMDOC
5583   This is a 11-bit reloc with the right 1 bit assumed to be 0
5584 ENUM
5585   BFD_RELOC_SCORE16_BRANCH
5586 ENUMDOC
5587   This is a 8-bit reloc with the right 1 bit assumed to be 0
5588 ENUM
5589   BFD_RELOC_SCORE_BCMP
5590 ENUMDOC
5591    This is a 9-bit reloc with the right 1 bit assumed to be 0
5592 ENUM
5593   BFD_RELOC_SCORE_GOT15
5594 ENUMX
5595   BFD_RELOC_SCORE_GOT_LO16
5596 ENUMX
5597   BFD_RELOC_SCORE_CALL15
5598 ENUMX
5599   BFD_RELOC_SCORE_DUMMY_HI16
5600 ENUMDOC
5601   Undocumented Score relocs
5602
5603 ENUM
5604   BFD_RELOC_IP2K_FR9
5605 ENUMDOC
5606   Scenix IP2K - 9-bit register number / data address
5607 ENUM
5608   BFD_RELOC_IP2K_BANK
5609 ENUMDOC
5610   Scenix IP2K - 4-bit register/data bank number
5611 ENUM
5612   BFD_RELOC_IP2K_ADDR16CJP
5613 ENUMDOC
5614   Scenix IP2K - low 13 bits of instruction word address
5615 ENUM
5616   BFD_RELOC_IP2K_PAGE3
5617 ENUMDOC
5618   Scenix IP2K - high 3 bits of instruction word address
5619 ENUM
5620   BFD_RELOC_IP2K_LO8DATA
5621 ENUMX
5622   BFD_RELOC_IP2K_HI8DATA
5623 ENUMX
5624   BFD_RELOC_IP2K_EX8DATA
5625 ENUMDOC
5626   Scenix IP2K - ext/low/high 8 bits of data address
5627 ENUM
5628   BFD_RELOC_IP2K_LO8INSN
5629 ENUMX
5630   BFD_RELOC_IP2K_HI8INSN
5631 ENUMDOC
5632   Scenix IP2K - low/high 8 bits of instruction word address
5633 ENUM
5634   BFD_RELOC_IP2K_PC_SKIP
5635 ENUMDOC
5636   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5637 ENUM
5638   BFD_RELOC_IP2K_TEXT
5639 ENUMDOC
5640   Scenix IP2K - 16 bit word address in text section.
5641 ENUM
5642   BFD_RELOC_IP2K_FR_OFFSET
5643 ENUMDOC
5644   Scenix IP2K - 7-bit sp or dp offset
5645 ENUM
5646   BFD_RELOC_VPE4KMATH_DATA
5647 ENUMX
5648   BFD_RELOC_VPE4KMATH_INSN
5649 ENUMDOC
5650   Scenix VPE4K coprocessor - data/insn-space addressing
5651
5652 ENUM
5653   BFD_RELOC_VTABLE_INHERIT
5654 ENUMX
5655   BFD_RELOC_VTABLE_ENTRY
5656 ENUMDOC
5657   These two relocations are used by the linker to determine which of
5658   the entries in a C++ virtual function table are actually used.  When
5659   the --gc-sections option is given, the linker will zero out the entries
5660   that are not used, so that the code for those functions need not be
5661   included in the output.
5662
5663   VTABLE_INHERIT is a zero-space relocation used to describe to the
5664   linker the inheritance tree of a C++ virtual function table.  The
5665   relocation's symbol should be the parent class' vtable, and the
5666   relocation should be located at the child vtable.
5667
5668   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5669   virtual function table entry.  The reloc's symbol should refer to the
5670   table of the class mentioned in the code.  Off of that base, an offset
5671   describes the entry that is being used.  For Rela hosts, this offset
5672   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5673   this offset in the reloc's section offset.
5674
5675 ENUM
5676   BFD_RELOC_IA64_IMM14
5677 ENUMX
5678   BFD_RELOC_IA64_IMM22
5679 ENUMX
5680   BFD_RELOC_IA64_IMM64
5681 ENUMX
5682   BFD_RELOC_IA64_DIR32MSB
5683 ENUMX
5684   BFD_RELOC_IA64_DIR32LSB
5685 ENUMX
5686   BFD_RELOC_IA64_DIR64MSB
5687 ENUMX
5688   BFD_RELOC_IA64_DIR64LSB
5689 ENUMX
5690   BFD_RELOC_IA64_GPREL22
5691 ENUMX
5692   BFD_RELOC_IA64_GPREL64I
5693 ENUMX
5694   BFD_RELOC_IA64_GPREL32MSB
5695 ENUMX
5696   BFD_RELOC_IA64_GPREL32LSB
5697 ENUMX
5698   BFD_RELOC_IA64_GPREL64MSB
5699 ENUMX
5700   BFD_RELOC_IA64_GPREL64LSB
5701 ENUMX
5702   BFD_RELOC_IA64_LTOFF22
5703 ENUMX
5704   BFD_RELOC_IA64_LTOFF64I
5705 ENUMX
5706   BFD_RELOC_IA64_PLTOFF22
5707 ENUMX
5708   BFD_RELOC_IA64_PLTOFF64I
5709 ENUMX
5710   BFD_RELOC_IA64_PLTOFF64MSB
5711 ENUMX
5712   BFD_RELOC_IA64_PLTOFF64LSB
5713 ENUMX
5714   BFD_RELOC_IA64_FPTR64I
5715 ENUMX
5716   BFD_RELOC_IA64_FPTR32MSB
5717 ENUMX
5718   BFD_RELOC_IA64_FPTR32LSB
5719 ENUMX
5720   BFD_RELOC_IA64_FPTR64MSB
5721 ENUMX
5722   BFD_RELOC_IA64_FPTR64LSB
5723 ENUMX
5724   BFD_RELOC_IA64_PCREL21B
5725 ENUMX
5726   BFD_RELOC_IA64_PCREL21BI
5727 ENUMX
5728   BFD_RELOC_IA64_PCREL21M
5729 ENUMX
5730   BFD_RELOC_IA64_PCREL21F
5731 ENUMX
5732   BFD_RELOC_IA64_PCREL22
5733 ENUMX
5734   BFD_RELOC_IA64_PCREL60B
5735 ENUMX
5736   BFD_RELOC_IA64_PCREL64I
5737 ENUMX
5738   BFD_RELOC_IA64_PCREL32MSB
5739 ENUMX
5740   BFD_RELOC_IA64_PCREL32LSB
5741 ENUMX
5742   BFD_RELOC_IA64_PCREL64MSB
5743 ENUMX
5744   BFD_RELOC_IA64_PCREL64LSB
5745 ENUMX
5746   BFD_RELOC_IA64_LTOFF_FPTR22
5747 ENUMX
5748   BFD_RELOC_IA64_LTOFF_FPTR64I
5749 ENUMX
5750   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5751 ENUMX
5752   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5753 ENUMX
5754   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5755 ENUMX
5756   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5757 ENUMX
5758   BFD_RELOC_IA64_SEGREL32MSB
5759 ENUMX
5760   BFD_RELOC_IA64_SEGREL32LSB
5761 ENUMX
5762   BFD_RELOC_IA64_SEGREL64MSB
5763 ENUMX
5764   BFD_RELOC_IA64_SEGREL64LSB
5765 ENUMX
5766   BFD_RELOC_IA64_SECREL32MSB
5767 ENUMX
5768   BFD_RELOC_IA64_SECREL32LSB
5769 ENUMX
5770   BFD_RELOC_IA64_SECREL64MSB
5771 ENUMX
5772   BFD_RELOC_IA64_SECREL64LSB
5773 ENUMX
5774   BFD_RELOC_IA64_REL32MSB
5775 ENUMX
5776   BFD_RELOC_IA64_REL32LSB
5777 ENUMX
5778   BFD_RELOC_IA64_REL64MSB
5779 ENUMX
5780   BFD_RELOC_IA64_REL64LSB
5781 ENUMX
5782   BFD_RELOC_IA64_LTV32MSB
5783 ENUMX
5784   BFD_RELOC_IA64_LTV32LSB
5785 ENUMX
5786   BFD_RELOC_IA64_LTV64MSB
5787 ENUMX
5788   BFD_RELOC_IA64_LTV64LSB
5789 ENUMX
5790   BFD_RELOC_IA64_IPLTMSB
5791 ENUMX
5792   BFD_RELOC_IA64_IPLTLSB
5793 ENUMX
5794   BFD_RELOC_IA64_COPY
5795 ENUMX
5796   BFD_RELOC_IA64_LTOFF22X
5797 ENUMX
5798   BFD_RELOC_IA64_LDXMOV
5799 ENUMX
5800   BFD_RELOC_IA64_TPREL14
5801 ENUMX
5802   BFD_RELOC_IA64_TPREL22
5803 ENUMX
5804   BFD_RELOC_IA64_TPREL64I
5805 ENUMX
5806   BFD_RELOC_IA64_TPREL64MSB
5807 ENUMX
5808   BFD_RELOC_IA64_TPREL64LSB
5809 ENUMX
5810   BFD_RELOC_IA64_LTOFF_TPREL22
5811 ENUMX
5812   BFD_RELOC_IA64_DTPMOD64MSB
5813 ENUMX
5814   BFD_RELOC_IA64_DTPMOD64LSB
5815 ENUMX
5816   BFD_RELOC_IA64_LTOFF_DTPMOD22
5817 ENUMX
5818   BFD_RELOC_IA64_DTPREL14
5819 ENUMX
5820   BFD_RELOC_IA64_DTPREL22
5821 ENUMX
5822   BFD_RELOC_IA64_DTPREL64I
5823 ENUMX
5824   BFD_RELOC_IA64_DTPREL32MSB
5825 ENUMX
5826   BFD_RELOC_IA64_DTPREL32LSB
5827 ENUMX
5828   BFD_RELOC_IA64_DTPREL64MSB
5829 ENUMX
5830   BFD_RELOC_IA64_DTPREL64LSB
5831 ENUMX
5832   BFD_RELOC_IA64_LTOFF_DTPREL22
5833 ENUMDOC
5834   Intel IA64 Relocations.
5835
5836 ENUM
5837   BFD_RELOC_M68HC11_HI8
5838 ENUMDOC
5839   Motorola 68HC11 reloc.
5840   This is the 8 bit high part of an absolute address.
5841 ENUM
5842   BFD_RELOC_M68HC11_LO8
5843 ENUMDOC
5844   Motorola 68HC11 reloc.
5845   This is the 8 bit low part of an absolute address.
5846 ENUM
5847   BFD_RELOC_M68HC11_3B
5848 ENUMDOC
5849   Motorola 68HC11 reloc.
5850   This is the 3 bit of a value.
5851 ENUM
5852   BFD_RELOC_M68HC11_RL_JUMP
5853 ENUMDOC
5854   Motorola 68HC11 reloc.
5855   This reloc marks the beginning of a jump/call instruction.
5856   It is used for linker relaxation to correctly identify beginning
5857   of instruction and change some branches to use PC-relative
5858   addressing mode.
5859 ENUM
5860   BFD_RELOC_M68HC11_RL_GROUP
5861 ENUMDOC
5862   Motorola 68HC11 reloc.
5863   This reloc marks a group of several instructions that gcc generates
5864   and for which the linker relaxation pass can modify and/or remove
5865   some of them.
5866 ENUM
5867   BFD_RELOC_M68HC11_LO16
5868 ENUMDOC
5869   Motorola 68HC11 reloc.
5870   This is the 16-bit lower part of an address.  It is used for 'call'
5871   instruction to specify the symbol address without any special
5872   transformation (due to memory bank window).
5873 ENUM
5874   BFD_RELOC_M68HC11_PAGE
5875 ENUMDOC
5876   Motorola 68HC11 reloc.
5877   This is a 8-bit reloc that specifies the page number of an address.
5878   It is used by 'call' instruction to specify the page number of
5879   the symbol.
5880 ENUM
5881   BFD_RELOC_M68HC11_24
5882 ENUMDOC
5883   Motorola 68HC11 reloc.
5884   This is a 24-bit reloc that represents the address with a 16-bit
5885   value and a 8-bit page number.  The symbol address is transformed
5886   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5887 ENUM
5888   BFD_RELOC_M68HC12_5B
5889 ENUMDOC
5890   Motorola 68HC12 reloc.
5891   This is the 5 bits of a value.
5892 ENUM
5893   BFD_RELOC_XGATE_RL_JUMP
5894 ENUMDOC
5895   Freescale XGATE reloc.
5896   This reloc marks the beginning of a bra/jal instruction.
5897 ENUM
5898   BFD_RELOC_XGATE_RL_GROUP
5899 ENUMDOC
5900   Freescale XGATE reloc.
5901   This reloc marks a group of several instructions that gcc generates
5902   and for which the linker relaxation pass can modify and/or remove
5903   some of them.
5904 ENUM
5905   BFD_RELOC_XGATE_LO16
5906 ENUMDOC
5907   Freescale XGATE reloc.
5908   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5909   instructions.
5910 ENUM
5911   BFD_RELOC_XGATE_GPAGE
5912 ENUMDOC
5913   Freescale XGATE reloc.
5914 ENUM
5915   BFD_RELOC_XGATE_24
5916 ENUMDOC
5917   Freescale XGATE reloc.
5918 ENUM
5919   BFD_RELOC_XGATE_PCREL_9
5920 ENUMDOC
5921   Freescale XGATE reloc.
5922   This is a 9-bit pc-relative reloc.
5923 ENUM
5924   BFD_RELOC_XGATE_PCREL_10
5925 ENUMDOC
5926   Freescale XGATE reloc.
5927   This is a 10-bit pc-relative reloc.
5928 ENUM
5929   BFD_RELOC_XGATE_IMM8_LO
5930 ENUMDOC
5931   Freescale XGATE reloc.
5932   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5933   instructions.
5934 ENUM
5935   BFD_RELOC_XGATE_IMM8_HI
5936 ENUMDOC
5937   Freescale XGATE reloc.
5938   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5939   instructions.
5940 ENUM
5941   BFD_RELOC_XGATE_IMM3
5942 ENUMDOC
5943   Freescale XGATE reloc.
5944   This is a 3-bit pc-relative reloc.
5945 ENUM
5946   BFD_RELOC_XGATE_IMM4
5947 ENUMDOC
5948   Freescale XGATE reloc.
5949   This is a 4-bit pc-relative reloc.
5950 ENUM
5951   BFD_RELOC_XGATE_IMM5
5952 ENUMDOC
5953   Freescale XGATE reloc.
5954   This is a 5-bit pc-relative reloc.
5955 ENUM
5956   BFD_RELOC_M68HC12_9B
5957 ENUMDOC
5958   Motorola 68HC12 reloc.
5959   This is the 9 bits of a value.
5960 ENUM
5961   BFD_RELOC_M68HC12_16B
5962 ENUMDOC
5963   Motorola 68HC12 reloc.
5964   This is the 16 bits of a value.
5965 ENUM
5966   BFD_RELOC_M68HC12_9_PCREL
5967 ENUMDOC
5968   Motorola 68HC12/XGATE reloc.
5969   This is a PCREL9 branch.
5970 ENUM
5971   BFD_RELOC_M68HC12_10_PCREL
5972 ENUMDOC
5973   Motorola 68HC12/XGATE reloc.
5974   This is a PCREL10 branch.
5975 ENUM
5976   BFD_RELOC_M68HC12_LO8XG
5977 ENUMDOC
5978   Motorola 68HC12/XGATE reloc.
5979   This is the 8 bit low part of an absolute address and immediately precedes
5980   a matching HI8XG part.
5981 ENUM
5982   BFD_RELOC_M68HC12_HI8XG
5983 ENUMDOC
5984   Motorola 68HC12/XGATE reloc.
5985   This is the 8 bit high part of an absolute address and immediately follows
5986   a matching LO8XG part.
5987 ENUM
5988   BFD_RELOC_S12Z_15_PCREL
5989 ENUMDOC
5990   Freescale S12Z reloc.
5991   This is a 15 bit relative address.  If the most significant bits are all zero
5992   then it may be truncated to 8 bits.
5993
5994 ENUM
5995   BFD_RELOC_CR16_NUM8
5996 ENUMX
5997   BFD_RELOC_CR16_NUM16
5998 ENUMX
5999   BFD_RELOC_CR16_NUM32
6000 ENUMX
6001   BFD_RELOC_CR16_NUM32a
6002 ENUMX
6003   BFD_RELOC_CR16_REGREL0
6004 ENUMX
6005   BFD_RELOC_CR16_REGREL4
6006 ENUMX
6007   BFD_RELOC_CR16_REGREL4a
6008 ENUMX
6009   BFD_RELOC_CR16_REGREL14
6010 ENUMX
6011   BFD_RELOC_CR16_REGREL14a
6012 ENUMX
6013   BFD_RELOC_CR16_REGREL16
6014 ENUMX
6015   BFD_RELOC_CR16_REGREL20
6016 ENUMX
6017   BFD_RELOC_CR16_REGREL20a
6018 ENUMX
6019   BFD_RELOC_CR16_ABS20
6020 ENUMX
6021   BFD_RELOC_CR16_ABS24
6022 ENUMX
6023   BFD_RELOC_CR16_IMM4
6024 ENUMX
6025   BFD_RELOC_CR16_IMM8
6026 ENUMX
6027   BFD_RELOC_CR16_IMM16
6028 ENUMX
6029   BFD_RELOC_CR16_IMM20
6030 ENUMX
6031   BFD_RELOC_CR16_IMM24
6032 ENUMX
6033   BFD_RELOC_CR16_IMM32
6034 ENUMX
6035   BFD_RELOC_CR16_IMM32a
6036 ENUMX
6037   BFD_RELOC_CR16_DISP4
6038 ENUMX
6039   BFD_RELOC_CR16_DISP8
6040 ENUMX
6041   BFD_RELOC_CR16_DISP16
6042 ENUMX
6043   BFD_RELOC_CR16_DISP20
6044 ENUMX
6045   BFD_RELOC_CR16_DISP24
6046 ENUMX
6047   BFD_RELOC_CR16_DISP24a
6048 ENUMX
6049   BFD_RELOC_CR16_SWITCH8
6050 ENUMX
6051   BFD_RELOC_CR16_SWITCH16
6052 ENUMX
6053   BFD_RELOC_CR16_SWITCH32
6054 ENUMX
6055   BFD_RELOC_CR16_GOT_REGREL20
6056 ENUMX
6057   BFD_RELOC_CR16_GOTC_REGREL20
6058 ENUMX
6059   BFD_RELOC_CR16_GLOB_DAT
6060 ENUMDOC
6061   NS CR16 Relocations.
6062
6063 ENUM
6064   BFD_RELOC_CRX_REL4
6065 ENUMX
6066   BFD_RELOC_CRX_REL8
6067 ENUMX
6068   BFD_RELOC_CRX_REL8_CMP
6069 ENUMX
6070   BFD_RELOC_CRX_REL16
6071 ENUMX
6072   BFD_RELOC_CRX_REL24
6073 ENUMX
6074   BFD_RELOC_CRX_REL32
6075 ENUMX
6076   BFD_RELOC_CRX_REGREL12
6077 ENUMX
6078   BFD_RELOC_CRX_REGREL22
6079 ENUMX
6080   BFD_RELOC_CRX_REGREL28
6081 ENUMX
6082   BFD_RELOC_CRX_REGREL32
6083 ENUMX
6084   BFD_RELOC_CRX_ABS16
6085 ENUMX
6086   BFD_RELOC_CRX_ABS32
6087 ENUMX
6088   BFD_RELOC_CRX_NUM8
6089 ENUMX
6090   BFD_RELOC_CRX_NUM16
6091 ENUMX
6092   BFD_RELOC_CRX_NUM32
6093 ENUMX
6094   BFD_RELOC_CRX_IMM16
6095 ENUMX
6096   BFD_RELOC_CRX_IMM32
6097 ENUMX
6098   BFD_RELOC_CRX_SWITCH8
6099 ENUMX
6100   BFD_RELOC_CRX_SWITCH16
6101 ENUMX
6102   BFD_RELOC_CRX_SWITCH32
6103 ENUMDOC
6104   NS CRX Relocations.
6105
6106 ENUM
6107   BFD_RELOC_CRIS_BDISP8
6108 ENUMX
6109   BFD_RELOC_CRIS_UNSIGNED_5
6110 ENUMX
6111   BFD_RELOC_CRIS_SIGNED_6
6112 ENUMX
6113   BFD_RELOC_CRIS_UNSIGNED_6
6114 ENUMX
6115   BFD_RELOC_CRIS_SIGNED_8
6116 ENUMX
6117   BFD_RELOC_CRIS_UNSIGNED_8
6118 ENUMX
6119   BFD_RELOC_CRIS_SIGNED_16
6120 ENUMX
6121   BFD_RELOC_CRIS_UNSIGNED_16
6122 ENUMX
6123   BFD_RELOC_CRIS_LAPCQ_OFFSET
6124 ENUMX
6125   BFD_RELOC_CRIS_UNSIGNED_4
6126 ENUMDOC
6127   These relocs are only used within the CRIS assembler.  They are not
6128   (at present) written to any object files.
6129 ENUM
6130   BFD_RELOC_CRIS_COPY
6131 ENUMX
6132   BFD_RELOC_CRIS_GLOB_DAT
6133 ENUMX
6134   BFD_RELOC_CRIS_JUMP_SLOT
6135 ENUMX
6136   BFD_RELOC_CRIS_RELATIVE
6137 ENUMDOC
6138   Relocs used in ELF shared libraries for CRIS.
6139 ENUM
6140   BFD_RELOC_CRIS_32_GOT
6141 ENUMDOC
6142   32-bit offset to symbol-entry within GOT.
6143 ENUM
6144   BFD_RELOC_CRIS_16_GOT
6145 ENUMDOC
6146   16-bit offset to symbol-entry within GOT.
6147 ENUM
6148   BFD_RELOC_CRIS_32_GOTPLT
6149 ENUMDOC
6150   32-bit offset to symbol-entry within GOT, with PLT handling.
6151 ENUM
6152   BFD_RELOC_CRIS_16_GOTPLT
6153 ENUMDOC
6154   16-bit offset to symbol-entry within GOT, with PLT handling.
6155 ENUM
6156   BFD_RELOC_CRIS_32_GOTREL
6157 ENUMDOC
6158   32-bit offset to symbol, relative to GOT.
6159 ENUM
6160   BFD_RELOC_CRIS_32_PLT_GOTREL
6161 ENUMDOC
6162   32-bit offset to symbol with PLT entry, relative to GOT.
6163 ENUM
6164   BFD_RELOC_CRIS_32_PLT_PCREL
6165 ENUMDOC
6166   32-bit offset to symbol with PLT entry, relative to this relocation.
6167
6168 ENUM
6169   BFD_RELOC_CRIS_32_GOT_GD
6170 ENUMX
6171   BFD_RELOC_CRIS_16_GOT_GD
6172 ENUMX
6173   BFD_RELOC_CRIS_32_GD
6174 ENUMX
6175   BFD_RELOC_CRIS_DTP
6176 ENUMX
6177   BFD_RELOC_CRIS_32_DTPREL
6178 ENUMX
6179   BFD_RELOC_CRIS_16_DTPREL
6180 ENUMX
6181   BFD_RELOC_CRIS_32_GOT_TPREL
6182 ENUMX
6183   BFD_RELOC_CRIS_16_GOT_TPREL
6184 ENUMX
6185   BFD_RELOC_CRIS_32_TPREL
6186 ENUMX
6187   BFD_RELOC_CRIS_16_TPREL
6188 ENUMX
6189   BFD_RELOC_CRIS_DTPMOD
6190 ENUMX
6191   BFD_RELOC_CRIS_32_IE
6192 ENUMDOC
6193   Relocs used in TLS code for CRIS.
6194
6195 ENUM
6196   BFD_RELOC_OR1K_REL_26
6197 ENUMX
6198   BFD_RELOC_OR1K_SLO16
6199 ENUMX
6200   BFD_RELOC_OR1K_PCREL_PG21
6201 ENUMX
6202   BFD_RELOC_OR1K_LO13
6203 ENUMX
6204   BFD_RELOC_OR1K_SLO13
6205 ENUMX
6206   BFD_RELOC_OR1K_GOTPC_HI16
6207 ENUMX
6208   BFD_RELOC_OR1K_GOTPC_LO16
6209 ENUMX
6210   BFD_RELOC_OR1K_GOT_AHI16
6211 ENUMX
6212   BFD_RELOC_OR1K_GOT16
6213 ENUMX
6214   BFD_RELOC_OR1K_GOT_PG21
6215 ENUMX
6216   BFD_RELOC_OR1K_GOT_LO13
6217 ENUMX
6218   BFD_RELOC_OR1K_PLT26
6219 ENUMX
6220   BFD_RELOC_OR1K_PLTA26
6221 ENUMX
6222   BFD_RELOC_OR1K_GOTOFF_SLO16
6223 ENUMX
6224   BFD_RELOC_OR1K_COPY
6225 ENUMX
6226   BFD_RELOC_OR1K_GLOB_DAT
6227 ENUMX
6228   BFD_RELOC_OR1K_JMP_SLOT
6229 ENUMX
6230   BFD_RELOC_OR1K_RELATIVE
6231 ENUMX
6232   BFD_RELOC_OR1K_TLS_GD_HI16
6233 ENUMX
6234   BFD_RELOC_OR1K_TLS_GD_LO16
6235 ENUMX
6236   BFD_RELOC_OR1K_TLS_GD_PG21
6237 ENUMX
6238   BFD_RELOC_OR1K_TLS_GD_LO13
6239 ENUMX
6240   BFD_RELOC_OR1K_TLS_LDM_HI16
6241 ENUMX
6242   BFD_RELOC_OR1K_TLS_LDM_LO16
6243 ENUMX
6244   BFD_RELOC_OR1K_TLS_LDM_PG21
6245 ENUMX
6246   BFD_RELOC_OR1K_TLS_LDM_LO13
6247 ENUMX
6248   BFD_RELOC_OR1K_TLS_LDO_HI16
6249 ENUMX
6250   BFD_RELOC_OR1K_TLS_LDO_LO16
6251 ENUMX
6252   BFD_RELOC_OR1K_TLS_IE_HI16
6253 ENUMX
6254   BFD_RELOC_OR1K_TLS_IE_AHI16
6255 ENUMX
6256   BFD_RELOC_OR1K_TLS_IE_LO16
6257 ENUMX
6258   BFD_RELOC_OR1K_TLS_IE_PG21
6259 ENUMX
6260   BFD_RELOC_OR1K_TLS_IE_LO13
6261 ENUMX
6262   BFD_RELOC_OR1K_TLS_LE_HI16
6263 ENUMX
6264   BFD_RELOC_OR1K_TLS_LE_AHI16
6265 ENUMX
6266   BFD_RELOC_OR1K_TLS_LE_LO16
6267 ENUMX
6268   BFD_RELOC_OR1K_TLS_LE_SLO16
6269 ENUMX
6270   BFD_RELOC_OR1K_TLS_TPOFF
6271 ENUMX
6272   BFD_RELOC_OR1K_TLS_DTPOFF
6273 ENUMX
6274   BFD_RELOC_OR1K_TLS_DTPMOD
6275 ENUMDOC
6276   OpenRISC 1000 Relocations.
6277
6278 ENUM
6279   BFD_RELOC_H8_DIR16A8
6280 ENUMX
6281   BFD_RELOC_H8_DIR16R8
6282 ENUMX
6283   BFD_RELOC_H8_DIR24A8
6284 ENUMX
6285   BFD_RELOC_H8_DIR24R8
6286 ENUMX
6287   BFD_RELOC_H8_DIR32A16
6288 ENUMX
6289   BFD_RELOC_H8_DISP32A16
6290 ENUMDOC
6291   H8 elf Relocations.
6292
6293 ENUM
6294   BFD_RELOC_XSTORMY16_REL_12
6295 ENUMX
6296   BFD_RELOC_XSTORMY16_12
6297 ENUMX
6298   BFD_RELOC_XSTORMY16_24
6299 ENUMX
6300   BFD_RELOC_XSTORMY16_FPTR16
6301 ENUMDOC
6302   Sony Xstormy16 Relocations.
6303
6304 ENUM
6305   BFD_RELOC_RELC
6306 ENUMDOC
6307   Self-describing complex relocations.
6308 COMMENT
6309
6310 ENUM
6311   BFD_RELOC_XC16X_PAG
6312 ENUMX
6313   BFD_RELOC_XC16X_POF
6314 ENUMX
6315   BFD_RELOC_XC16X_SEG
6316 ENUMX
6317   BFD_RELOC_XC16X_SOF
6318 ENUMDOC
6319   Infineon Relocations.
6320
6321 ENUM
6322   BFD_RELOC_VAX_GLOB_DAT
6323 ENUMX
6324   BFD_RELOC_VAX_JMP_SLOT
6325 ENUMX
6326   BFD_RELOC_VAX_RELATIVE
6327 ENUMDOC
6328   Relocations used by VAX ELF.
6329
6330 ENUM
6331   BFD_RELOC_MT_PC16
6332 ENUMDOC
6333   Morpho MT - 16 bit immediate relocation.
6334 ENUM
6335   BFD_RELOC_MT_HI16
6336 ENUMDOC
6337   Morpho MT - Hi 16 bits of an address.
6338 ENUM
6339   BFD_RELOC_MT_LO16
6340 ENUMDOC
6341   Morpho MT - Low 16 bits of an address.
6342 ENUM
6343   BFD_RELOC_MT_GNU_VTINHERIT
6344 ENUMDOC
6345   Morpho MT - Used to tell the linker which vtable entries are used.
6346 ENUM
6347   BFD_RELOC_MT_GNU_VTENTRY
6348 ENUMDOC
6349   Morpho MT - Used to tell the linker which vtable entries are used.
6350 ENUM
6351   BFD_RELOC_MT_PCINSN8
6352 ENUMDOC
6353   Morpho MT - 8 bit immediate relocation.
6354
6355 ENUM
6356   BFD_RELOC_MSP430_10_PCREL
6357 ENUMX
6358   BFD_RELOC_MSP430_16_PCREL
6359 ENUMX
6360   BFD_RELOC_MSP430_16
6361 ENUMX
6362   BFD_RELOC_MSP430_16_PCREL_BYTE
6363 ENUMX
6364   BFD_RELOC_MSP430_16_BYTE
6365 ENUMX
6366   BFD_RELOC_MSP430_2X_PCREL
6367 ENUMX
6368   BFD_RELOC_MSP430_RL_PCREL
6369 ENUMX
6370   BFD_RELOC_MSP430_ABS8
6371 ENUMX
6372   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6373 ENUMX
6374   BFD_RELOC_MSP430X_PCR20_EXT_DST
6375 ENUMX
6376   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6377 ENUMX
6378   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6379 ENUMX
6380   BFD_RELOC_MSP430X_ABS20_EXT_DST
6381 ENUMX
6382   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6383 ENUMX
6384   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6385 ENUMX
6386   BFD_RELOC_MSP430X_ABS20_ADR_DST
6387 ENUMX
6388   BFD_RELOC_MSP430X_PCR16
6389 ENUMX
6390   BFD_RELOC_MSP430X_PCR20_CALL
6391 ENUMX
6392   BFD_RELOC_MSP430X_ABS16
6393 ENUMX
6394   BFD_RELOC_MSP430_ABS_HI16
6395 ENUMX
6396   BFD_RELOC_MSP430_PREL31
6397 ENUMX
6398   BFD_RELOC_MSP430_SYM_DIFF
6399 ENUMX
6400   BFD_RELOC_MSP430_SET_ULEB128
6401 ENUMX
6402   BFD_RELOC_MSP430_SUB_ULEB128
6403
6404 ENUMDOC
6405   msp430 specific relocation codes
6406
6407 ENUM
6408   BFD_RELOC_NIOS2_S16
6409 ENUMX
6410   BFD_RELOC_NIOS2_U16
6411 ENUMX
6412   BFD_RELOC_NIOS2_CALL26
6413 ENUMX
6414   BFD_RELOC_NIOS2_IMM5
6415 ENUMX
6416   BFD_RELOC_NIOS2_CACHE_OPX
6417 ENUMX
6418   BFD_RELOC_NIOS2_IMM6
6419 ENUMX
6420   BFD_RELOC_NIOS2_IMM8
6421 ENUMX
6422   BFD_RELOC_NIOS2_HI16
6423 ENUMX
6424   BFD_RELOC_NIOS2_LO16
6425 ENUMX
6426   BFD_RELOC_NIOS2_HIADJ16
6427 ENUMX
6428   BFD_RELOC_NIOS2_GPREL
6429 ENUMX
6430   BFD_RELOC_NIOS2_UJMP
6431 ENUMX
6432   BFD_RELOC_NIOS2_CJMP
6433 ENUMX
6434   BFD_RELOC_NIOS2_CALLR
6435 ENUMX
6436   BFD_RELOC_NIOS2_ALIGN
6437 ENUMX
6438   BFD_RELOC_NIOS2_GOT16
6439 ENUMX
6440   BFD_RELOC_NIOS2_CALL16
6441 ENUMX
6442   BFD_RELOC_NIOS2_GOTOFF_LO
6443 ENUMX
6444   BFD_RELOC_NIOS2_GOTOFF_HA
6445 ENUMX
6446   BFD_RELOC_NIOS2_PCREL_LO
6447 ENUMX
6448   BFD_RELOC_NIOS2_PCREL_HA
6449 ENUMX
6450   BFD_RELOC_NIOS2_TLS_GD16
6451 ENUMX
6452   BFD_RELOC_NIOS2_TLS_LDM16
6453 ENUMX
6454   BFD_RELOC_NIOS2_TLS_LDO16
6455 ENUMX
6456   BFD_RELOC_NIOS2_TLS_IE16
6457 ENUMX
6458   BFD_RELOC_NIOS2_TLS_LE16
6459 ENUMX
6460   BFD_RELOC_NIOS2_TLS_DTPMOD
6461 ENUMX
6462   BFD_RELOC_NIOS2_TLS_DTPREL
6463 ENUMX
6464   BFD_RELOC_NIOS2_TLS_TPREL
6465 ENUMX
6466   BFD_RELOC_NIOS2_COPY
6467 ENUMX
6468   BFD_RELOC_NIOS2_GLOB_DAT
6469 ENUMX
6470   BFD_RELOC_NIOS2_JUMP_SLOT
6471 ENUMX
6472   BFD_RELOC_NIOS2_RELATIVE
6473 ENUMX
6474   BFD_RELOC_NIOS2_GOTOFF
6475 ENUMX
6476   BFD_RELOC_NIOS2_CALL26_NOAT
6477 ENUMX
6478   BFD_RELOC_NIOS2_GOT_LO
6479 ENUMX
6480   BFD_RELOC_NIOS2_GOT_HA
6481 ENUMX
6482   BFD_RELOC_NIOS2_CALL_LO
6483 ENUMX
6484   BFD_RELOC_NIOS2_CALL_HA
6485 ENUMX
6486   BFD_RELOC_NIOS2_R2_S12
6487 ENUMX
6488   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6489 ENUMX
6490   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6491 ENUMX
6492   BFD_RELOC_NIOS2_R2_T1I7_2
6493 ENUMX
6494   BFD_RELOC_NIOS2_R2_T2I4
6495 ENUMX
6496   BFD_RELOC_NIOS2_R2_T2I4_1
6497 ENUMX
6498   BFD_RELOC_NIOS2_R2_T2I4_2
6499 ENUMX
6500   BFD_RELOC_NIOS2_R2_X1I7_2
6501 ENUMX
6502   BFD_RELOC_NIOS2_R2_X2L5
6503 ENUMX
6504   BFD_RELOC_NIOS2_R2_F1I5_2
6505 ENUMX
6506   BFD_RELOC_NIOS2_R2_L5I4X1
6507 ENUMX
6508   BFD_RELOC_NIOS2_R2_T1X1I6
6509 ENUMX
6510   BFD_RELOC_NIOS2_R2_T1X1I6_2
6511 ENUMDOC
6512   Relocations used by the Altera Nios II core.
6513
6514 ENUM
6515   BFD_RELOC_PRU_U16
6516 ENUMDOC
6517   PRU LDI 16-bit unsigned data-memory relocation.
6518 ENUM
6519   BFD_RELOC_PRU_U16_PMEMIMM
6520 ENUMDOC
6521   PRU LDI 16-bit unsigned instruction-memory relocation.
6522 ENUM
6523   BFD_RELOC_PRU_LDI32
6524 ENUMDOC
6525   PRU relocation for two consecutive LDI load instructions that load a
6526   32 bit value into a register. If the higher bits are all zero, then
6527   the second instruction may be relaxed.
6528 ENUM
6529   BFD_RELOC_PRU_S10_PCREL
6530 ENUMDOC
6531   PRU QBBx 10-bit signed PC-relative relocation.
6532 ENUM
6533   BFD_RELOC_PRU_U8_PCREL
6534 ENUMDOC
6535   PRU 8-bit unsigned relocation used for the LOOP instruction.
6536 ENUM
6537   BFD_RELOC_PRU_32_PMEM
6538 ENUMX
6539   BFD_RELOC_PRU_16_PMEM
6540 ENUMDOC
6541   PRU Program Memory relocations.  Used to convert from byte addressing to
6542   32-bit word addressing.
6543 ENUM
6544   BFD_RELOC_PRU_GNU_DIFF8
6545 ENUMX
6546   BFD_RELOC_PRU_GNU_DIFF16
6547 ENUMX
6548   BFD_RELOC_PRU_GNU_DIFF32
6549 ENUMX
6550   BFD_RELOC_PRU_GNU_DIFF16_PMEM
6551 ENUMX
6552   BFD_RELOC_PRU_GNU_DIFF32_PMEM
6553 ENUMDOC
6554   PRU relocations to mark the difference of two local symbols.
6555   These are only needed to support linker relaxation and can be ignored
6556   when not relaxing.  The field is set to the value of the difference
6557   assuming no relaxation.  The relocation encodes the position of the
6558   second symbol so the linker can determine whether to adjust the field
6559   value. The PMEM variants encode the word difference, instead of byte
6560   difference between symbols.
6561
6562 ENUM
6563   BFD_RELOC_IQ2000_OFFSET_16
6564 ENUMX
6565   BFD_RELOC_IQ2000_OFFSET_21
6566 ENUMX
6567   BFD_RELOC_IQ2000_UHI16
6568 ENUMDOC
6569   IQ2000 Relocations.
6570
6571 ENUM
6572   BFD_RELOC_XTENSA_RTLD
6573 ENUMDOC
6574   Special Xtensa relocation used only by PLT entries in ELF shared
6575   objects to indicate that the runtime linker should set the value
6576   to one of its own internal functions or data structures.
6577 ENUM
6578   BFD_RELOC_XTENSA_GLOB_DAT
6579 ENUMX
6580   BFD_RELOC_XTENSA_JMP_SLOT
6581 ENUMX
6582   BFD_RELOC_XTENSA_RELATIVE
6583 ENUMDOC
6584   Xtensa relocations for ELF shared objects.
6585 ENUM
6586   BFD_RELOC_XTENSA_PLT
6587 ENUMDOC
6588   Xtensa relocation used in ELF object files for symbols that may require
6589   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6590 ENUM
6591   BFD_RELOC_XTENSA_DIFF8
6592 ENUMX
6593   BFD_RELOC_XTENSA_DIFF16
6594 ENUMX
6595   BFD_RELOC_XTENSA_DIFF32
6596 ENUMDOC
6597   Xtensa relocations for backward compatibility.  These have been replaced
6598   by BFD_RELOC_XTENSA_PDIFF and BFD_RELOC_XTENSA_NDIFF.
6599   Xtensa relocations to mark the difference of two local symbols.
6600   These are only needed to support linker relaxation and can be ignored
6601   when not relaxing.  The field is set to the value of the difference
6602   assuming no relaxation.  The relocation encodes the position of the
6603   first symbol so the linker can determine whether to adjust the field
6604   value.
6605 ENUM
6606   BFD_RELOC_XTENSA_SLOT0_OP
6607 ENUMX
6608   BFD_RELOC_XTENSA_SLOT1_OP
6609 ENUMX
6610   BFD_RELOC_XTENSA_SLOT2_OP
6611 ENUMX
6612   BFD_RELOC_XTENSA_SLOT3_OP
6613 ENUMX
6614   BFD_RELOC_XTENSA_SLOT4_OP
6615 ENUMX
6616   BFD_RELOC_XTENSA_SLOT5_OP
6617 ENUMX
6618   BFD_RELOC_XTENSA_SLOT6_OP
6619 ENUMX
6620   BFD_RELOC_XTENSA_SLOT7_OP
6621 ENUMX
6622   BFD_RELOC_XTENSA_SLOT8_OP
6623 ENUMX
6624   BFD_RELOC_XTENSA_SLOT9_OP
6625 ENUMX
6626   BFD_RELOC_XTENSA_SLOT10_OP
6627 ENUMX
6628   BFD_RELOC_XTENSA_SLOT11_OP
6629 ENUMX
6630   BFD_RELOC_XTENSA_SLOT12_OP
6631 ENUMX
6632   BFD_RELOC_XTENSA_SLOT13_OP
6633 ENUMX
6634   BFD_RELOC_XTENSA_SLOT14_OP
6635 ENUMDOC
6636   Generic Xtensa relocations for instruction operands.  Only the slot
6637   number is encoded in the relocation.  The relocation applies to the
6638   last PC-relative immediate operand, or if there are no PC-relative
6639   immediates, to the last immediate operand.
6640 ENUM
6641   BFD_RELOC_XTENSA_SLOT0_ALT
6642 ENUMX
6643   BFD_RELOC_XTENSA_SLOT1_ALT
6644 ENUMX
6645   BFD_RELOC_XTENSA_SLOT2_ALT
6646 ENUMX
6647   BFD_RELOC_XTENSA_SLOT3_ALT
6648 ENUMX
6649   BFD_RELOC_XTENSA_SLOT4_ALT
6650 ENUMX
6651   BFD_RELOC_XTENSA_SLOT5_ALT
6652 ENUMX
6653   BFD_RELOC_XTENSA_SLOT6_ALT
6654 ENUMX
6655   BFD_RELOC_XTENSA_SLOT7_ALT
6656 ENUMX
6657   BFD_RELOC_XTENSA_SLOT8_ALT
6658 ENUMX
6659   BFD_RELOC_XTENSA_SLOT9_ALT
6660 ENUMX
6661   BFD_RELOC_XTENSA_SLOT10_ALT
6662 ENUMX
6663   BFD_RELOC_XTENSA_SLOT11_ALT
6664 ENUMX
6665   BFD_RELOC_XTENSA_SLOT12_ALT
6666 ENUMX
6667   BFD_RELOC_XTENSA_SLOT13_ALT
6668 ENUMX
6669   BFD_RELOC_XTENSA_SLOT14_ALT
6670 ENUMDOC
6671   Alternate Xtensa relocations.  Only the slot is encoded in the
6672   relocation.  The meaning of these relocations is opcode-specific.
6673 ENUM
6674   BFD_RELOC_XTENSA_OP0
6675 ENUMX
6676   BFD_RELOC_XTENSA_OP1
6677 ENUMX
6678   BFD_RELOC_XTENSA_OP2
6679 ENUMDOC
6680   Xtensa relocations for backward compatibility.  These have all been
6681   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6682 ENUM
6683   BFD_RELOC_XTENSA_ASM_EXPAND
6684 ENUMDOC
6685   Xtensa relocation to mark that the assembler expanded the
6686   instructions from an original target.  The expansion size is
6687   encoded in the reloc size.
6688 ENUM
6689   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6690 ENUMDOC
6691   Xtensa relocation to mark that the linker should simplify
6692   assembler-expanded instructions.  This is commonly used
6693   internally by the linker after analysis of a
6694   BFD_RELOC_XTENSA_ASM_EXPAND.
6695 ENUM
6696   BFD_RELOC_XTENSA_TLSDESC_FN
6697 ENUMX
6698   BFD_RELOC_XTENSA_TLSDESC_ARG
6699 ENUMX
6700   BFD_RELOC_XTENSA_TLS_DTPOFF
6701 ENUMX
6702   BFD_RELOC_XTENSA_TLS_TPOFF
6703 ENUMX
6704   BFD_RELOC_XTENSA_TLS_FUNC
6705 ENUMX
6706   BFD_RELOC_XTENSA_TLS_ARG
6707 ENUMX
6708   BFD_RELOC_XTENSA_TLS_CALL
6709 ENUMDOC
6710   Xtensa TLS relocations.
6711 ENUM
6712   BFD_RELOC_XTENSA_PDIFF8
6713 ENUMX
6714   BFD_RELOC_XTENSA_PDIFF16
6715 ENUMX
6716   BFD_RELOC_XTENSA_PDIFF32
6717 ENUMX
6718   BFD_RELOC_XTENSA_NDIFF8
6719 ENUMX
6720   BFD_RELOC_XTENSA_NDIFF16
6721 ENUMX
6722   BFD_RELOC_XTENSA_NDIFF32
6723 ENUMDOC
6724   Xtensa relocations to mark the difference of two local symbols.
6725   These are only needed to support linker relaxation and can be ignored
6726   when not relaxing.  The field is set to the value of the difference
6727   assuming no relaxation.  The relocation encodes the position of the
6728   subtracted symbol so the linker can determine whether to adjust the field
6729   value.  PDIFF relocations are used for positive differences, NDIFF
6730   relocations are used for negative differences.  The difference value
6731   is treated as unsigned with these relocation types, giving full
6732   8/16 value ranges.
6733
6734 ENUM
6735   BFD_RELOC_Z80_DISP8
6736 ENUMDOC
6737   8 bit signed offset in (ix+d) or (iy+d).
6738 ENUM
6739   BFD_RELOC_Z80_BYTE0
6740 ENUMDOC
6741   First 8 bits of multibyte (32, 24 or 16 bit) value.
6742 ENUM
6743   BFD_RELOC_Z80_BYTE1
6744 ENUMDOC
6745   Second 8 bits of multibyte (32, 24 or 16 bit) value.
6746 ENUM
6747   BFD_RELOC_Z80_BYTE2
6748 ENUMDOC
6749   Third 8 bits of multibyte (32 or 24 bit) value.
6750 ENUM
6751   BFD_RELOC_Z80_BYTE3
6752 ENUMDOC
6753   Fourth 8 bits of multibyte (32 bit) value.
6754 ENUM
6755   BFD_RELOC_Z80_WORD0
6756 ENUMDOC
6757   Lowest 16 bits of multibyte (32 or 24 bit) value.
6758 ENUM
6759   BFD_RELOC_Z80_WORD1
6760 ENUMDOC
6761   Highest 16 bits of multibyte (32 or 24 bit) value.
6762 ENUM
6763   BFD_RELOC_Z80_16_BE
6764 ENUMDOC
6765   Like BFD_RELOC_16 but big-endian.
6766
6767 ENUM
6768   BFD_RELOC_Z8K_DISP7
6769 ENUMDOC
6770   DJNZ offset.
6771 ENUM
6772   BFD_RELOC_Z8K_CALLR
6773 ENUMDOC
6774   CALR offset.
6775 ENUM
6776   BFD_RELOC_Z8K_IMM4L
6777 ENUMDOC
6778   4 bit value.
6779
6780 ENUM
6781    BFD_RELOC_LM32_CALL
6782 ENUMX
6783    BFD_RELOC_LM32_BRANCH
6784 ENUMX
6785    BFD_RELOC_LM32_16_GOT
6786 ENUMX
6787    BFD_RELOC_LM32_GOTOFF_HI16
6788 ENUMX
6789    BFD_RELOC_LM32_GOTOFF_LO16
6790 ENUMX
6791    BFD_RELOC_LM32_COPY
6792 ENUMX
6793    BFD_RELOC_LM32_GLOB_DAT
6794 ENUMX
6795    BFD_RELOC_LM32_JMP_SLOT
6796 ENUMX
6797    BFD_RELOC_LM32_RELATIVE
6798 ENUMDOC
6799  Lattice Mico32 relocations.
6800
6801 ENUM
6802   BFD_RELOC_MACH_O_SECTDIFF
6803 ENUMDOC
6804   Difference between two section addreses.  Must be followed by a
6805   BFD_RELOC_MACH_O_PAIR.
6806 ENUM
6807   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6808 ENUMDOC
6809   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6810 ENUM
6811   BFD_RELOC_MACH_O_PAIR
6812 ENUMDOC
6813   Pair of relocation.  Contains the first symbol.
6814 ENUM
6815   BFD_RELOC_MACH_O_SUBTRACTOR32
6816 ENUMDOC
6817   Symbol will be substracted.  Must be followed by a BFD_RELOC_32.
6818 ENUM
6819   BFD_RELOC_MACH_O_SUBTRACTOR64
6820 ENUMDOC
6821   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6822
6823 ENUM
6824   BFD_RELOC_MACH_O_X86_64_BRANCH32
6825 ENUMX
6826   BFD_RELOC_MACH_O_X86_64_BRANCH8
6827 ENUMDOC
6828   PCREL relocations.  They are marked as branch to create PLT entry if
6829   required.
6830 ENUM
6831   BFD_RELOC_MACH_O_X86_64_GOT
6832 ENUMDOC
6833   Used when referencing a GOT entry.
6834 ENUM
6835   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6836 ENUMDOC
6837   Used when loading a GOT entry with movq.  It is specially marked so that
6838   the linker could optimize the movq to a leaq if possible.
6839 ENUM
6840   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6841 ENUMDOC
6842   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6843 ENUM
6844   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6845 ENUMDOC
6846   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6847 ENUM
6848   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6849 ENUMDOC
6850   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6851 ENUM
6852   BFD_RELOC_MACH_O_X86_64_TLV
6853 ENUMDOC
6854   Used when referencing a TLV entry.
6855
6856
6857 ENUM
6858   BFD_RELOC_MACH_O_ARM64_ADDEND
6859 ENUMDOC
6860   Addend for PAGE or PAGEOFF.
6861 ENUM
6862   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6863 ENUMDOC
6864   Relative offset to page of GOT slot.
6865 ENUM
6866   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6867 ENUMDOC
6868   Relative offset within page of GOT slot.
6869 ENUM
6870   BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6871 ENUMDOC
6872   Address of a GOT entry.
6873
6874 ENUM
6875   BFD_RELOC_MICROBLAZE_32_LO
6876 ENUMDOC
6877   This is a 32 bit reloc for the microblaze that stores the
6878   low 16 bits of a value
6879 ENUM
6880   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6881 ENUMDOC
6882   This is a 32 bit pc-relative reloc for the microblaze that
6883   stores the low 16 bits of a value
6884 ENUM
6885   BFD_RELOC_MICROBLAZE_32_ROSDA
6886 ENUMDOC
6887   This is a 32 bit reloc for the microblaze that stores a
6888   value relative to the read-only small data area anchor
6889 ENUM
6890   BFD_RELOC_MICROBLAZE_32_RWSDA
6891 ENUMDOC
6892   This is a 32 bit reloc for the microblaze that stores a
6893   value relative to the read-write small data area anchor
6894 ENUM
6895   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6896 ENUMDOC
6897   This is a 32 bit reloc for the microblaze to handle
6898   expressions of the form "Symbol Op Symbol"
6899 ENUM
6900   BFD_RELOC_MICROBLAZE_64_NONE
6901 ENUMDOC
6902   This is a 64 bit reloc that stores the 32 bit pc relative
6903   value in two words (with an imm instruction).  No relocation is
6904   done here - only used for relaxing
6905 ENUM
6906   BFD_RELOC_MICROBLAZE_64_GOTPC
6907 ENUMDOC
6908   This is a 64 bit reloc that stores the 32 bit pc relative
6909   value in two words (with an imm instruction).  The relocation is
6910   PC-relative GOT offset
6911 ENUM
6912   BFD_RELOC_MICROBLAZE_64_GOT
6913 ENUMDOC
6914   This is a 64 bit reloc that stores the 32 bit pc relative
6915   value in two words (with an imm instruction).  The relocation is
6916   GOT offset
6917 ENUM
6918   BFD_RELOC_MICROBLAZE_64_PLT
6919 ENUMDOC
6920   This is a 64 bit reloc that stores the 32 bit pc relative
6921   value in two words (with an imm instruction).  The relocation is
6922   PC-relative offset into PLT
6923 ENUM
6924   BFD_RELOC_MICROBLAZE_64_GOTOFF
6925 ENUMDOC
6926   This is a 64 bit reloc that stores the 32 bit GOT relative
6927   value in two words (with an imm instruction).  The relocation is
6928   relative offset from _GLOBAL_OFFSET_TABLE_
6929 ENUM
6930   BFD_RELOC_MICROBLAZE_32_GOTOFF
6931 ENUMDOC
6932   This is a 32 bit reloc that stores the 32 bit GOT relative
6933   value in a word.  The relocation is relative offset from
6934   _GLOBAL_OFFSET_TABLE_
6935 ENUM
6936   BFD_RELOC_MICROBLAZE_COPY
6937 ENUMDOC
6938   This is used to tell the dynamic linker to copy the value out of
6939   the dynamic object into the runtime process image.
6940 ENUM
6941   BFD_RELOC_MICROBLAZE_64_TLS
6942 ENUMDOC
6943   Unused Reloc
6944 ENUM
6945   BFD_RELOC_MICROBLAZE_64_TLSGD
6946 ENUMDOC
6947   This is a 64 bit reloc that stores the 32 bit GOT relative value
6948   of the GOT TLS GD info entry in two words (with an imm instruction). The
6949   relocation is GOT offset.
6950 ENUM
6951   BFD_RELOC_MICROBLAZE_64_TLSLD
6952 ENUMDOC
6953   This is a 64 bit reloc that stores the 32 bit GOT relative value
6954   of the GOT TLS LD info entry in two words (with an imm instruction). The
6955   relocation is GOT offset.
6956 ENUM
6957   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6958 ENUMDOC
6959   This is a 32 bit reloc that stores the Module ID to GOT(n).
6960 ENUM
6961   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6962 ENUMDOC
6963   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6964 ENUM
6965   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6966 ENUMDOC
6967   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6968   instruction)
6969 ENUM
6970   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6971 ENUMDOC
6972   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6973   to two words (uses imm instruction).
6974 ENUM
6975   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6976 ENUMDOC
6977   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6978   to two words (uses imm instruction).
6979 ENUM
6980   BFD_RELOC_MICROBLAZE_64_TEXTPCREL
6981 ENUMDOC
6982   This is a 64 bit reloc that stores the 32 bit pc relative
6983   value in two words (with an imm instruction).  The relocation is
6984   PC-relative offset from start of TEXT.
6985 ENUM
6986   BFD_RELOC_MICROBLAZE_64_TEXTREL
6987 ENUMDOC
6988   This is a 64 bit reloc that stores the 32 bit offset
6989   value in two words (with an imm instruction).  The relocation is
6990   relative offset from start of TEXT.
6991
6992 ENUM
6993   BFD_RELOC_AARCH64_RELOC_START
6994 ENUMDOC
6995   AArch64 pseudo relocation code to mark the start of the AArch64
6996   relocation enumerators.  N.B. the order of the enumerators is
6997   important as several tables in the AArch64 bfd backend are indexed
6998   by these enumerators; make sure they are all synced.
6999 ENUM
7000   BFD_RELOC_AARCH64_NULL
7001 ENUMDOC
7002   Deprecated AArch64 null relocation code.
7003 ENUM
7004   BFD_RELOC_AARCH64_NONE
7005 ENUMDOC
7006   AArch64 null relocation code.
7007 ENUM
7008   BFD_RELOC_AARCH64_64
7009 ENUMX
7010   BFD_RELOC_AARCH64_32
7011 ENUMX
7012   BFD_RELOC_AARCH64_16
7013 ENUMDOC
7014   Basic absolute relocations of N bits.  These are equivalent to
7015 BFD_RELOC_N and they were added to assist the indexing of the howto
7016 table.
7017 ENUM
7018   BFD_RELOC_AARCH64_64_PCREL
7019 ENUMX
7020   BFD_RELOC_AARCH64_32_PCREL
7021 ENUMX
7022   BFD_RELOC_AARCH64_16_PCREL
7023 ENUMDOC
7024   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
7025 and they were added to assist the indexing of the howto table.
7026 ENUM
7027   BFD_RELOC_AARCH64_MOVW_G0
7028 ENUMDOC
7029   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
7030   of an unsigned address/value.
7031 ENUM
7032   BFD_RELOC_AARCH64_MOVW_G0_NC
7033 ENUMDOC
7034   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
7035   an address/value.  No overflow checking.
7036 ENUM
7037   BFD_RELOC_AARCH64_MOVW_G1
7038 ENUMDOC
7039   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
7040   of an unsigned address/value.
7041 ENUM
7042   BFD_RELOC_AARCH64_MOVW_G1_NC
7043 ENUMDOC
7044   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
7045   of an address/value.  No overflow checking.
7046 ENUM
7047   BFD_RELOC_AARCH64_MOVW_G2
7048 ENUMDOC
7049   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
7050   of an unsigned address/value.
7051 ENUM
7052   BFD_RELOC_AARCH64_MOVW_G2_NC
7053 ENUMDOC
7054   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
7055   of an address/value.  No overflow checking.
7056 ENUM
7057   BFD_RELOC_AARCH64_MOVW_G3
7058 ENUMDOC
7059   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
7060   of a signed or unsigned address/value.
7061 ENUM
7062   BFD_RELOC_AARCH64_MOVW_G0_S
7063 ENUMDOC
7064   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7065   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7066   value's sign.
7067 ENUM
7068   BFD_RELOC_AARCH64_MOVW_G1_S
7069 ENUMDOC
7070   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
7071   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7072   value's sign.
7073 ENUM
7074   BFD_RELOC_AARCH64_MOVW_G2_S
7075 ENUMDOC
7076   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
7077   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7078   value's sign.
7079 ENUM
7080   BFD_RELOC_AARCH64_MOVW_PREL_G0
7081 ENUMDOC
7082   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7083   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7084   value's sign.
7085 ENUM
7086   BFD_RELOC_AARCH64_MOVW_PREL_G0_NC
7087 ENUMDOC
7088   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7089   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7090   value's sign.
7091 ENUM
7092   BFD_RELOC_AARCH64_MOVW_PREL_G1
7093 ENUMDOC
7094   AArch64 MOVK instruction with most significant bits 16 to 31
7095   of a signed value.
7096 ENUM
7097   BFD_RELOC_AARCH64_MOVW_PREL_G1_NC
7098 ENUMDOC
7099   AArch64 MOVK instruction with most significant bits 16 to 31
7100   of a signed value.
7101 ENUM
7102   BFD_RELOC_AARCH64_MOVW_PREL_G2
7103 ENUMDOC
7104   AArch64 MOVK instruction with most significant bits 32 to 47
7105   of a signed value.
7106 ENUM
7107   BFD_RELOC_AARCH64_MOVW_PREL_G2_NC
7108 ENUMDOC
7109   AArch64 MOVK instruction with most significant bits 32 to 47
7110   of a signed value.
7111 ENUM
7112   BFD_RELOC_AARCH64_MOVW_PREL_G3
7113 ENUMDOC
7114   AArch64 MOVK instruction with most significant bits 47 to 63
7115   of a signed value.
7116 ENUM
7117   BFD_RELOC_AARCH64_LD_LO19_PCREL
7118 ENUMDOC
7119   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
7120   offset.  The lowest two bits must be zero and are not stored in the
7121   instruction, giving a 21 bit signed byte offset.
7122 ENUM
7123   BFD_RELOC_AARCH64_ADR_LO21_PCREL
7124 ENUMDOC
7125   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
7126 ENUM
7127   BFD_RELOC_AARCH64_ADR_HI21_PCREL
7128 ENUMDOC
7129   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7130   offset, giving a 4KB aligned page base address.
7131 ENUM
7132   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
7133 ENUMDOC
7134   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7135   offset, giving a 4KB aligned page base address, but with no overflow
7136   checking.
7137 ENUM
7138   BFD_RELOC_AARCH64_ADD_LO12
7139 ENUMDOC
7140   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
7141   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7142 ENUM
7143   BFD_RELOC_AARCH64_LDST8_LO12
7144 ENUMDOC
7145   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
7146   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7147 ENUM
7148   BFD_RELOC_AARCH64_TSTBR14
7149 ENUMDOC
7150   AArch64 14 bit pc-relative test bit and branch.
7151   The lowest two bits must be zero and are not stored in the instruction,
7152   giving a 16 bit signed byte offset.
7153 ENUM
7154   BFD_RELOC_AARCH64_BRANCH19
7155 ENUMDOC
7156   AArch64 19 bit pc-relative conditional branch and compare & branch.
7157   The lowest two bits must be zero and are not stored in the instruction,
7158   giving a 21 bit signed byte offset.
7159 ENUM
7160   BFD_RELOC_AARCH64_JUMP26
7161 ENUMDOC
7162   AArch64 26 bit pc-relative unconditional branch.
7163   The lowest two bits must be zero and are not stored in the instruction,
7164   giving a 28 bit signed byte offset.
7165 ENUM
7166   BFD_RELOC_AARCH64_CALL26
7167 ENUMDOC
7168   AArch64 26 bit pc-relative unconditional branch and link.
7169   The lowest two bits must be zero and are not stored in the instruction,
7170   giving a 28 bit signed byte offset.
7171 ENUM
7172   BFD_RELOC_AARCH64_LDST16_LO12
7173 ENUMDOC
7174   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
7175   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7176 ENUM
7177   BFD_RELOC_AARCH64_LDST32_LO12
7178 ENUMDOC
7179   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
7180   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7181 ENUM
7182   BFD_RELOC_AARCH64_LDST64_LO12
7183 ENUMDOC
7184   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
7185   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7186 ENUM
7187   BFD_RELOC_AARCH64_LDST128_LO12
7188 ENUMDOC
7189   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
7190   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7191 ENUM
7192   BFD_RELOC_AARCH64_GOT_LD_PREL19
7193 ENUMDOC
7194   AArch64 Load Literal instruction, holding a 19 bit PC relative word
7195   offset of the global offset table entry for a symbol.  The lowest two
7196   bits must be zero and are not stored in the instruction, giving a 21
7197   bit signed byte offset.  This relocation type requires signed overflow
7198   checking.
7199 ENUM
7200   BFD_RELOC_AARCH64_ADR_GOT_PAGE
7201 ENUMDOC
7202   Get to the page base of the global offset table entry for a symbol as
7203   part of an ADRP instruction using a 21 bit PC relative value.Used in
7204   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
7205 ENUM
7206   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
7207 ENUMDOC
7208   Unsigned 12 bit byte offset for 64 bit load/store from the page of
7209   the GOT entry for this symbol.  Used in conjunction with
7210   BFD_RELOC_AARCH64_ADR_GOT_PAGE.  Valid in LP64 ABI only.
7211 ENUM
7212   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
7213 ENUMDOC
7214   Unsigned 12 bit byte offset for 32 bit load/store from the page of
7215   the GOT entry for this symbol.  Used in conjunction with
7216   BFD_RELOC_AARCH64_ADR_GOT_PAGE.  Valid in ILP32 ABI only.
7217  ENUM
7218   BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
7219 ENUMDOC
7220   Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
7221   for this symbol.  Valid in LP64 ABI only.
7222 ENUM
7223   BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
7224 ENUMDOC
7225   Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
7226   for this symbol.  Valid in LP64 ABI only.
7227 ENUM
7228   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
7229 ENUMDOC
7230   Unsigned 15 bit byte offset for 64 bit load/store from the page of
7231   the GOT entry for this symbol.  Valid in LP64 ABI only.
7232 ENUM
7233   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
7234 ENUMDOC
7235   Scaled 14 bit byte offset to the page base of the global offset table.
7236 ENUM
7237   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
7238 ENUMDOC
7239   Scaled 15 bit byte offset to the page base of the global offset table.
7240 ENUM
7241   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
7242 ENUMDOC
7243   Get to the page base of the global offset table entry for a symbols
7244   tls_index structure as part of an adrp instruction using a 21 bit PC
7245   relative value.  Used in conjunction with
7246   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
7247 ENUM
7248   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
7249 ENUMDOC
7250   AArch64 TLS General Dynamic
7251 ENUM
7252   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7253 ENUMDOC
7254   Unsigned 12 bit byte offset to global offset table entry for a symbols
7255   tls_index structure.  Used in conjunction with
7256   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7257 ENUM
7258   BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7259 ENUMDOC
7260   AArch64 TLS General Dynamic relocation.
7261 ENUM
7262   BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7263 ENUMDOC
7264   AArch64 TLS General Dynamic relocation.
7265 ENUM
7266   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7267 ENUMDOC
7268   AArch64 TLS INITIAL EXEC relocation.
7269 ENUM
7270   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7271 ENUMDOC
7272   AArch64 TLS INITIAL EXEC relocation.
7273 ENUM
7274   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7275 ENUMDOC
7276   AArch64 TLS INITIAL EXEC relocation.
7277 ENUM
7278   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7279 ENUMDOC
7280   AArch64 TLS INITIAL EXEC relocation.
7281 ENUM
7282   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7283 ENUMDOC
7284   AArch64 TLS INITIAL EXEC relocation.
7285 ENUM
7286   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7287 ENUMDOC
7288   AArch64 TLS INITIAL EXEC relocation.
7289 ENUM
7290   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7291 ENUMDOC
7292   bit[23:12] of byte offset to module TLS base address.
7293 ENUM
7294   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7295 ENUMDOC
7296   Unsigned 12 bit byte offset to module TLS base address.
7297 ENUM
7298   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7299 ENUMDOC
7300   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7301 ENUM
7302   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7303 ENUMDOC
7304   Unsigned 12 bit byte offset to global offset table entry for a symbols
7305   tls_index structure.  Used in conjunction with
7306   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7307 ENUM
7308   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7309 ENUMDOC
7310   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7311   instruction.
7312 ENUM
7313   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7314 ENUMDOC
7315   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7316 ENUM
7317   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7318 ENUMDOC
7319   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7320   instructions.
7321 ENUM
7322   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7323 ENUMDOC
7324   Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7325 ENUM
7326   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7327 ENUMDOC
7328   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7329   instructions.
7330 ENUM
7331   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7332 ENUMDOC
7333   Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7334 ENUM
7335   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7336 ENUMDOC
7337   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7338   instructions.
7339 ENUM
7340   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7341 ENUMDOC
7342   Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7343 ENUM
7344   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7345 ENUMDOC
7346   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7347   instructions.
7348 ENUM
7349   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7350 ENUMDOC
7351   Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7352 ENUM
7353   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7354 ENUMDOC
7355   bit[15:0] of byte offset to module TLS base address.
7356 ENUM
7357   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7358 ENUMDOC
7359   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7360 ENUM
7361   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7362 ENUMDOC
7363   bit[31:16] of byte offset to module TLS base address.
7364 ENUM
7365   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7366 ENUMDOC
7367   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7368 ENUM
7369   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7370 ENUMDOC
7371   bit[47:32] of byte offset to module TLS base address.
7372 ENUM
7373   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7374 ENUMDOC
7375   AArch64 TLS LOCAL EXEC relocation.
7376 ENUM
7377   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7378 ENUMDOC
7379   AArch64 TLS LOCAL EXEC relocation.
7380 ENUM
7381   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7382 ENUMDOC
7383   AArch64 TLS LOCAL EXEC relocation.
7384 ENUM
7385   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7386 ENUMDOC
7387   AArch64 TLS LOCAL EXEC relocation.
7388 ENUM
7389   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7390 ENUMDOC
7391   AArch64 TLS LOCAL EXEC relocation.
7392 ENUM
7393   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7394 ENUMDOC
7395   AArch64 TLS LOCAL EXEC relocation.
7396 ENUM
7397   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7398 ENUMDOC
7399   AArch64 TLS LOCAL EXEC relocation.
7400 ENUM
7401   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7402 ENUMDOC
7403   AArch64 TLS LOCAL EXEC relocation.
7404 ENUM
7405   BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12
7406 ENUMDOC
7407   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7408   instructions.
7409 ENUM
7410   BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC
7411 ENUMDOC
7412   Similar as BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, but no overflow check.
7413 ENUM
7414   BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12
7415 ENUMDOC
7416   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7417   instructions.
7418 ENUM
7419   BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC
7420 ENUMDOC
7421   Similar as BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, but no overflow check.
7422 ENUM
7423   BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12
7424 ENUMDOC
7425   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7426   instructions.
7427 ENUM
7428   BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC
7429 ENUMDOC
7430   Similar as BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, but no overflow check.
7431 ENUM
7432   BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12
7433 ENUMDOC
7434   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7435   instructions.
7436 ENUM
7437   BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC
7438 ENUMDOC
7439   Similar as BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, but no overflow check.
7440 ENUM
7441   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7442 ENUMDOC
7443   AArch64 TLS DESC relocation.
7444 ENUM
7445   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7446 ENUMDOC
7447   AArch64 TLS DESC relocation.
7448 ENUM
7449   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7450 ENUMDOC
7451   AArch64 TLS DESC relocation.
7452 ENUM
7453   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12
7454 ENUMDOC
7455   AArch64 TLS DESC relocation.
7456 ENUM
7457   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7458 ENUMDOC
7459   AArch64 TLS DESC relocation.
7460 ENUM
7461   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12
7462 ENUMDOC
7463   AArch64 TLS DESC relocation.
7464 ENUM
7465   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7466 ENUMDOC
7467   AArch64 TLS DESC relocation.
7468 ENUM
7469   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7470 ENUMDOC
7471   AArch64 TLS DESC relocation.
7472 ENUM
7473   BFD_RELOC_AARCH64_TLSDESC_LDR
7474 ENUMDOC
7475   AArch64 TLS DESC relocation.
7476 ENUM
7477   BFD_RELOC_AARCH64_TLSDESC_ADD
7478 ENUMDOC
7479   AArch64 TLS DESC relocation.
7480 ENUM
7481   BFD_RELOC_AARCH64_TLSDESC_CALL
7482 ENUMDOC
7483   AArch64 TLS DESC relocation.
7484 ENUM
7485   BFD_RELOC_AARCH64_COPY
7486 ENUMDOC
7487   AArch64 TLS relocation.
7488 ENUM
7489   BFD_RELOC_AARCH64_GLOB_DAT
7490 ENUMDOC
7491   AArch64 TLS relocation.
7492 ENUM
7493   BFD_RELOC_AARCH64_JUMP_SLOT
7494 ENUMDOC
7495   AArch64 TLS relocation.
7496 ENUM
7497   BFD_RELOC_AARCH64_RELATIVE
7498 ENUMDOC
7499   AArch64 TLS relocation.
7500 ENUM
7501   BFD_RELOC_AARCH64_TLS_DTPMOD
7502 ENUMDOC
7503   AArch64 TLS relocation.
7504 ENUM
7505   BFD_RELOC_AARCH64_TLS_DTPREL
7506 ENUMDOC
7507   AArch64 TLS relocation.
7508 ENUM
7509   BFD_RELOC_AARCH64_TLS_TPREL
7510 ENUMDOC
7511   AArch64 TLS relocation.
7512 ENUM
7513   BFD_RELOC_AARCH64_TLSDESC
7514 ENUMDOC
7515   AArch64 TLS relocation.
7516 ENUM
7517   BFD_RELOC_AARCH64_IRELATIVE
7518 ENUMDOC
7519   AArch64 support for STT_GNU_IFUNC.
7520 ENUM
7521   BFD_RELOC_AARCH64_RELOC_END
7522 ENUMDOC
7523   AArch64 pseudo relocation code to mark the end of the AArch64
7524   relocation enumerators that have direct mapping to ELF reloc codes.
7525   There are a few more enumerators after this one; those are mainly
7526   used by the AArch64 assembler for the internal fixup or to select
7527   one of the above enumerators.
7528 ENUM
7529   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7530 ENUMDOC
7531   AArch64 pseudo relocation code to be used internally by the AArch64
7532   assembler and not (currently) written to any object files.
7533 ENUM
7534   BFD_RELOC_AARCH64_LDST_LO12
7535 ENUMDOC
7536   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7537   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7538 ENUM
7539   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7540 ENUMDOC
7541   AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be
7542   used internally by the AArch64 assembler and not (currently) written to
7543   any object files.
7544 ENUM
7545   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7546 ENUMDOC
7547   Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7548 ENUM
7549   BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12
7550 ENUMDOC
7551   AArch64 pseudo relocation code for TLS local exec mode.  It's to be
7552   used internally by the AArch64 assembler and not (currently) written to
7553   any object files.
7554 ENUM
7555   BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC
7556 ENUMDOC
7557   Similar as BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12, but no overflow check.
7558 ENUM
7559   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7560 ENUMDOC
7561   AArch64 pseudo relocation code to be used internally by the AArch64
7562   assembler and not (currently) written to any object files.
7563 ENUM
7564   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7565 ENUMDOC
7566   AArch64 pseudo relocation code to be used internally by the AArch64
7567   assembler and not (currently) written to any object files.
7568 ENUM
7569   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7570 ENUMDOC
7571   AArch64 pseudo relocation code to be used internally by the AArch64
7572   assembler and not (currently) written to any object files.
7573 ENUM
7574   BFD_RELOC_TILEPRO_COPY
7575 ENUMX
7576   BFD_RELOC_TILEPRO_GLOB_DAT
7577 ENUMX
7578   BFD_RELOC_TILEPRO_JMP_SLOT
7579 ENUMX
7580   BFD_RELOC_TILEPRO_RELATIVE
7581 ENUMX
7582   BFD_RELOC_TILEPRO_BROFF_X1
7583 ENUMX
7584   BFD_RELOC_TILEPRO_JOFFLONG_X1
7585 ENUMX
7586   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7587 ENUMX
7588   BFD_RELOC_TILEPRO_IMM8_X0
7589 ENUMX
7590   BFD_RELOC_TILEPRO_IMM8_Y0
7591 ENUMX
7592   BFD_RELOC_TILEPRO_IMM8_X1
7593 ENUMX
7594   BFD_RELOC_TILEPRO_IMM8_Y1
7595 ENUMX
7596   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7597 ENUMX
7598   BFD_RELOC_TILEPRO_MT_IMM15_X1
7599 ENUMX
7600   BFD_RELOC_TILEPRO_MF_IMM15_X1
7601 ENUMX
7602   BFD_RELOC_TILEPRO_IMM16_X0
7603 ENUMX
7604   BFD_RELOC_TILEPRO_IMM16_X1
7605 ENUMX
7606   BFD_RELOC_TILEPRO_IMM16_X0_LO
7607 ENUMX
7608   BFD_RELOC_TILEPRO_IMM16_X1_LO
7609 ENUMX
7610   BFD_RELOC_TILEPRO_IMM16_X0_HI
7611 ENUMX
7612   BFD_RELOC_TILEPRO_IMM16_X1_HI
7613 ENUMX
7614   BFD_RELOC_TILEPRO_IMM16_X0_HA
7615 ENUMX
7616   BFD_RELOC_TILEPRO_IMM16_X1_HA
7617 ENUMX
7618   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7619 ENUMX
7620   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7621 ENUMX
7622   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7623 ENUMX
7624   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7625 ENUMX
7626   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7627 ENUMX
7628   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7629 ENUMX
7630   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7631 ENUMX
7632   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7633 ENUMX
7634   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7635 ENUMX
7636   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7637 ENUMX
7638   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7639 ENUMX
7640   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7641 ENUMX
7642   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7643 ENUMX
7644   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7645 ENUMX
7646   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7647 ENUMX
7648   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7649 ENUMX
7650   BFD_RELOC_TILEPRO_MMSTART_X0
7651 ENUMX
7652   BFD_RELOC_TILEPRO_MMEND_X0
7653 ENUMX
7654   BFD_RELOC_TILEPRO_MMSTART_X1
7655 ENUMX
7656   BFD_RELOC_TILEPRO_MMEND_X1
7657 ENUMX
7658   BFD_RELOC_TILEPRO_SHAMT_X0
7659 ENUMX
7660   BFD_RELOC_TILEPRO_SHAMT_X1
7661 ENUMX
7662   BFD_RELOC_TILEPRO_SHAMT_Y0
7663 ENUMX
7664   BFD_RELOC_TILEPRO_SHAMT_Y1
7665 ENUMX
7666   BFD_RELOC_TILEPRO_TLS_GD_CALL
7667 ENUMX
7668   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7669 ENUMX
7670   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7671 ENUMX
7672   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7673 ENUMX
7674   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7675 ENUMX
7676   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7677 ENUMX
7678   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7679 ENUMX
7680   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7681 ENUMX
7682   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7683 ENUMX
7684   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7685 ENUMX
7686   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7687 ENUMX
7688   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7689 ENUMX
7690   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7691 ENUMX
7692   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7693 ENUMX
7694   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7695 ENUMX
7696   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7697 ENUMX
7698   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7699 ENUMX
7700   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7701 ENUMX
7702   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7703 ENUMX
7704   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7705 ENUMX
7706   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7707 ENUMX
7708   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7709 ENUMX
7710   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7711 ENUMX
7712   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7713 ENUMX
7714   BFD_RELOC_TILEPRO_TLS_TPOFF32
7715 ENUMX
7716   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7717 ENUMX
7718   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7719 ENUMX
7720   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7721 ENUMX
7722   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7723 ENUMX
7724   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7725 ENUMX
7726   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7727 ENUMX
7728   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7729 ENUMX
7730   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7731 ENUMDOC
7732   Tilera TILEPro Relocations.
7733 ENUM
7734   BFD_RELOC_TILEGX_HW0
7735 ENUMX
7736   BFD_RELOC_TILEGX_HW1
7737 ENUMX
7738   BFD_RELOC_TILEGX_HW2
7739 ENUMX
7740   BFD_RELOC_TILEGX_HW3
7741 ENUMX
7742   BFD_RELOC_TILEGX_HW0_LAST
7743 ENUMX
7744   BFD_RELOC_TILEGX_HW1_LAST
7745 ENUMX
7746   BFD_RELOC_TILEGX_HW2_LAST
7747 ENUMX
7748   BFD_RELOC_TILEGX_COPY
7749 ENUMX
7750   BFD_RELOC_TILEGX_GLOB_DAT
7751 ENUMX
7752   BFD_RELOC_TILEGX_JMP_SLOT
7753 ENUMX
7754   BFD_RELOC_TILEGX_RELATIVE
7755 ENUMX
7756   BFD_RELOC_TILEGX_BROFF_X1
7757 ENUMX
7758   BFD_RELOC_TILEGX_JUMPOFF_X1
7759 ENUMX
7760   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7761 ENUMX
7762   BFD_RELOC_TILEGX_IMM8_X0
7763 ENUMX
7764   BFD_RELOC_TILEGX_IMM8_Y0
7765 ENUMX
7766   BFD_RELOC_TILEGX_IMM8_X1
7767 ENUMX
7768   BFD_RELOC_TILEGX_IMM8_Y1
7769 ENUMX
7770   BFD_RELOC_TILEGX_DEST_IMM8_X1
7771 ENUMX
7772   BFD_RELOC_TILEGX_MT_IMM14_X1
7773 ENUMX
7774   BFD_RELOC_TILEGX_MF_IMM14_X1
7775 ENUMX
7776   BFD_RELOC_TILEGX_MMSTART_X0
7777 ENUMX
7778   BFD_RELOC_TILEGX_MMEND_X0
7779 ENUMX
7780   BFD_RELOC_TILEGX_SHAMT_X0
7781 ENUMX
7782   BFD_RELOC_TILEGX_SHAMT_X1
7783 ENUMX
7784   BFD_RELOC_TILEGX_SHAMT_Y0
7785 ENUMX
7786   BFD_RELOC_TILEGX_SHAMT_Y1
7787 ENUMX
7788   BFD_RELOC_TILEGX_IMM16_X0_HW0
7789 ENUMX
7790   BFD_RELOC_TILEGX_IMM16_X1_HW0
7791 ENUMX
7792   BFD_RELOC_TILEGX_IMM16_X0_HW1
7793 ENUMX
7794   BFD_RELOC_TILEGX_IMM16_X1_HW1
7795 ENUMX
7796   BFD_RELOC_TILEGX_IMM16_X0_HW2
7797 ENUMX
7798   BFD_RELOC_TILEGX_IMM16_X1_HW2
7799 ENUMX
7800   BFD_RELOC_TILEGX_IMM16_X0_HW3
7801 ENUMX
7802   BFD_RELOC_TILEGX_IMM16_X1_HW3
7803 ENUMX
7804   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7805 ENUMX
7806   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7807 ENUMX
7808   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7809 ENUMX
7810   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7811 ENUMX
7812   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7813 ENUMX
7814   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7815 ENUMX
7816   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7817 ENUMX
7818   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7819 ENUMX
7820   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7821 ENUMX
7822   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7823 ENUMX
7824   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7825 ENUMX
7826   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7827 ENUMX
7828   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7829 ENUMX
7830   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7831 ENUMX
7832   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7833 ENUMX
7834   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7835 ENUMX
7836   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7837 ENUMX
7838   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7839 ENUMX
7840   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7841 ENUMX
7842   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7843 ENUMX
7844   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7845 ENUMX
7846   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7847 ENUMX
7848   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7849 ENUMX
7850   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7851 ENUMX
7852   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7853 ENUMX
7854   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7855 ENUMX
7856   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7857 ENUMX
7858   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7859 ENUMX
7860   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7861 ENUMX
7862   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7863 ENUMX
7864   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7865 ENUMX
7866   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7867 ENUMX
7868   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7869 ENUMX
7870   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7871 ENUMX
7872   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7873 ENUMX
7874   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7875 ENUMX
7876   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7877 ENUMX
7878   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7879 ENUMX
7880   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7881 ENUMX
7882   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7883 ENUMX
7884   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7885 ENUMX
7886   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7887 ENUMX
7888   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7889 ENUMX
7890   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7891 ENUMX
7892   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7893 ENUMX
7894   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7895 ENUMX
7896   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7897 ENUMX
7898   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7899 ENUMX
7900   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7901 ENUMX
7902   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7903 ENUMX
7904   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7905 ENUMX
7906   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7907 ENUMX
7908   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7909 ENUMX
7910   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7911 ENUMX
7912   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7913 ENUMX
7914   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7915 ENUMX
7916   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7917 ENUMX
7918   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7919 ENUMX
7920   BFD_RELOC_TILEGX_TLS_DTPMOD64
7921 ENUMX
7922   BFD_RELOC_TILEGX_TLS_DTPOFF64
7923 ENUMX
7924   BFD_RELOC_TILEGX_TLS_TPOFF64
7925 ENUMX
7926   BFD_RELOC_TILEGX_TLS_DTPMOD32
7927 ENUMX
7928   BFD_RELOC_TILEGX_TLS_DTPOFF32
7929 ENUMX
7930   BFD_RELOC_TILEGX_TLS_TPOFF32
7931 ENUMX
7932   BFD_RELOC_TILEGX_TLS_GD_CALL
7933 ENUMX
7934   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7935 ENUMX
7936   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7937 ENUMX
7938   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7939 ENUMX
7940   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7941 ENUMX
7942   BFD_RELOC_TILEGX_TLS_IE_LOAD
7943 ENUMX
7944   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7945 ENUMX
7946   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7947 ENUMX
7948   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7949 ENUMX
7950   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7951 ENUMDOC
7952   Tilera TILE-Gx Relocations.
7953
7954 ENUM
7955   BFD_RELOC_BPF_64
7956 ENUMX
7957   BFD_RELOC_BPF_32
7958 ENUMX
7959   BFD_RELOC_BPF_16
7960 ENUMX
7961   BFD_RELOC_BPF_DISP16
7962 ENUMX
7963   BFD_RELOC_BPF_DISP32
7964 ENUMDOC
7965   Linux eBPF relocations.
7966
7967 ENUM
7968   BFD_RELOC_EPIPHANY_SIMM8
7969 ENUMDOC
7970   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7971 ENUM
7972   BFD_RELOC_EPIPHANY_SIMM24
7973 ENUMDOC
7974   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7975 ENUM
7976   BFD_RELOC_EPIPHANY_HIGH
7977 ENUMDOC
7978   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7979 ENUM
7980   BFD_RELOC_EPIPHANY_LOW
7981 ENUMDOC
7982   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7983 ENUM
7984   BFD_RELOC_EPIPHANY_SIMM11
7985 ENUMDOC
7986   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7987 ENUM
7988   BFD_RELOC_EPIPHANY_IMM11
7989 ENUMDOC
7990   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7991 ENUM
7992   BFD_RELOC_EPIPHANY_IMM8
7993 ENUMDOC
7994   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7995
7996 ENUM
7997   BFD_RELOC_VISIUM_HI16
7998 ENUMX
7999   BFD_RELOC_VISIUM_LO16
8000 ENUMX
8001   BFD_RELOC_VISIUM_IM16
8002 ENUMX
8003   BFD_RELOC_VISIUM_REL16
8004 ENUMX
8005   BFD_RELOC_VISIUM_HI16_PCREL
8006 ENUMX
8007   BFD_RELOC_VISIUM_LO16_PCREL
8008 ENUMX
8009   BFD_RELOC_VISIUM_IM16_PCREL
8010 ENUMDOC
8011   Visium Relocations.
8012
8013 ENUM
8014   BFD_RELOC_WASM32_LEB128
8015 ENUMX
8016   BFD_RELOC_WASM32_LEB128_GOT
8017 ENUMX
8018   BFD_RELOC_WASM32_LEB128_GOT_CODE
8019 ENUMX
8020   BFD_RELOC_WASM32_LEB128_PLT
8021 ENUMX
8022   BFD_RELOC_WASM32_PLT_INDEX
8023 ENUMX
8024   BFD_RELOC_WASM32_ABS32_CODE
8025 ENUMX
8026   BFD_RELOC_WASM32_COPY
8027 ENUMX
8028   BFD_RELOC_WASM32_CODE_POINTER
8029 ENUMX
8030   BFD_RELOC_WASM32_INDEX
8031 ENUMX
8032   BFD_RELOC_WASM32_PLT_SIG
8033 ENUMDOC
8034   WebAssembly relocations.
8035
8036 ENUM
8037   BFD_RELOC_CKCORE_NONE
8038 ENUMX
8039   BFD_RELOC_CKCORE_ADDR32
8040 ENUMX
8041   BFD_RELOC_CKCORE_PCREL_IMM8BY4
8042 ENUMX
8043   BFD_RELOC_CKCORE_PCREL_IMM11BY2
8044 ENUMX
8045   BFD_RELOC_CKCORE_PCREL_IMM4BY2
8046 ENUMX
8047   BFD_RELOC_CKCORE_PCREL32
8048 ENUMX
8049   BFD_RELOC_CKCORE_PCREL_JSR_IMM11BY2
8050 ENUMX
8051   BFD_RELOC_CKCORE_GNU_VTINHERIT
8052 ENUMX
8053   BFD_RELOC_CKCORE_GNU_VTENTRY
8054 ENUMX
8055   BFD_RELOC_CKCORE_RELATIVE
8056 ENUMX
8057   BFD_RELOC_CKCORE_COPY
8058 ENUMX
8059   BFD_RELOC_CKCORE_GLOB_DAT
8060 ENUMX
8061   BFD_RELOC_CKCORE_JUMP_SLOT
8062 ENUMX
8063   BFD_RELOC_CKCORE_GOTOFF
8064 ENUMX
8065   BFD_RELOC_CKCORE_GOTPC
8066 ENUMX
8067   BFD_RELOC_CKCORE_GOT32
8068 ENUMX
8069   BFD_RELOC_CKCORE_PLT32
8070 ENUMX
8071   BFD_RELOC_CKCORE_ADDRGOT
8072 ENUMX
8073   BFD_RELOC_CKCORE_ADDRPLT
8074 ENUMX
8075   BFD_RELOC_CKCORE_PCREL_IMM26BY2
8076 ENUMX
8077   BFD_RELOC_CKCORE_PCREL_IMM16BY2
8078 ENUMX
8079   BFD_RELOC_CKCORE_PCREL_IMM16BY4
8080 ENUMX
8081   BFD_RELOC_CKCORE_PCREL_IMM10BY2
8082 ENUMX
8083   BFD_RELOC_CKCORE_PCREL_IMM10BY4
8084 ENUMX
8085   BFD_RELOC_CKCORE_ADDR_HI16
8086 ENUMX
8087   BFD_RELOC_CKCORE_ADDR_LO16
8088 ENUMX
8089   BFD_RELOC_CKCORE_GOTPC_HI16
8090 ENUMX
8091   BFD_RELOC_CKCORE_GOTPC_LO16
8092 ENUMX
8093   BFD_RELOC_CKCORE_GOTOFF_HI16
8094 ENUMX
8095   BFD_RELOC_CKCORE_GOTOFF_LO16
8096 ENUMX
8097   BFD_RELOC_CKCORE_GOT12
8098 ENUMX
8099   BFD_RELOC_CKCORE_GOT_HI16
8100 ENUMX
8101   BFD_RELOC_CKCORE_GOT_LO16
8102 ENUMX
8103   BFD_RELOC_CKCORE_PLT12
8104 ENUMX
8105   BFD_RELOC_CKCORE_PLT_HI16
8106 ENUMX
8107   BFD_RELOC_CKCORE_PLT_LO16
8108 ENUMX
8109   BFD_RELOC_CKCORE_ADDRGOT_HI16
8110 ENUMX
8111   BFD_RELOC_CKCORE_ADDRGOT_LO16
8112 ENUMX
8113   BFD_RELOC_CKCORE_ADDRPLT_HI16
8114 ENUMX
8115   BFD_RELOC_CKCORE_ADDRPLT_LO16
8116 ENUMX
8117   BFD_RELOC_CKCORE_PCREL_JSR_IMM26BY2
8118 ENUMX
8119   BFD_RELOC_CKCORE_TOFFSET_LO16
8120 ENUMX
8121   BFD_RELOC_CKCORE_DOFFSET_LO16
8122 ENUMX
8123   BFD_RELOC_CKCORE_PCREL_IMM18BY2
8124 ENUMX
8125   BFD_RELOC_CKCORE_DOFFSET_IMM18
8126 ENUMX
8127   BFD_RELOC_CKCORE_DOFFSET_IMM18BY2
8128 ENUMX
8129   BFD_RELOC_CKCORE_DOFFSET_IMM18BY4
8130 ENUMX
8131   BFD_RELOC_CKCORE_GOTOFF_IMM18
8132 ENUMX
8133   BFD_RELOC_CKCORE_GOT_IMM18BY4
8134 ENUMX
8135   BFD_RELOC_CKCORE_PLT_IMM18BY4
8136 ENUMX
8137   BFD_RELOC_CKCORE_PCREL_IMM7BY4
8138 ENUMX
8139   BFD_RELOC_CKCORE_TLS_LE32
8140 ENUMX
8141   BFD_RELOC_CKCORE_TLS_IE32
8142 ENUMX
8143   BFD_RELOC_CKCORE_TLS_GD32
8144 ENUMX
8145   BFD_RELOC_CKCORE_TLS_LDM32
8146 ENUMX
8147   BFD_RELOC_CKCORE_TLS_LDO32
8148 ENUMX
8149   BFD_RELOC_CKCORE_TLS_DTPMOD32
8150 ENUMX
8151   BFD_RELOC_CKCORE_TLS_DTPOFF32
8152 ENUMX
8153   BFD_RELOC_CKCORE_TLS_TPOFF32
8154 ENUMX
8155   BFD_RELOC_CKCORE_PCREL_FLRW_IMM8BY4
8156 ENUMX
8157   BFD_RELOC_CKCORE_NOJSRI
8158 ENUMX
8159   BFD_RELOC_CKCORE_CALLGRAPH
8160 ENUMX
8161   BFD_RELOC_CKCORE_IRELATIVE
8162 ENUMX
8163   BFD_RELOC_CKCORE_PCREL_BLOOP_IMM4BY4
8164 ENUMX
8165   BFD_RELOC_CKCORE_PCREL_BLOOP_IMM12BY4
8166 ENUMDOC
8167   C-SKY relocations.
8168
8169 ENUM
8170   BFD_RELOC_S12Z_OPR
8171 ENUMDOC
8172   S12Z relocations.
8173
8174 ENDSENUM
8175   BFD_RELOC_UNUSED
8176 CODE_FRAGMENT
8177 .
8178 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
8179 */
8180
8181 /*
8182 FUNCTION
8183         bfd_reloc_type_lookup
8184         bfd_reloc_name_lookup
8185
8186 SYNOPSIS
8187         reloc_howto_type *bfd_reloc_type_lookup
8188           (bfd *abfd, bfd_reloc_code_real_type code);
8189         reloc_howto_type *bfd_reloc_name_lookup
8190           (bfd *abfd, const char *reloc_name);
8191
8192 DESCRIPTION
8193         Return a pointer to a howto structure which, when
8194         invoked, will perform the relocation @var{code} on data from the
8195         architecture noted.
8196
8197 */
8198
8199 reloc_howto_type *
8200 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8201 {
8202   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
8203 }
8204
8205 reloc_howto_type *
8206 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
8207 {
8208   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
8209 }
8210
8211 static reloc_howto_type bfd_howto_32 =
8212 HOWTO (0, 00, 2, 32, false, 0, complain_overflow_dont, 0, "VRT32", false, 0xffffffff, 0xffffffff, true);
8213
8214 /*
8215 INTERNAL_FUNCTION
8216         bfd_default_reloc_type_lookup
8217
8218 SYNOPSIS
8219         reloc_howto_type *bfd_default_reloc_type_lookup
8220           (bfd *abfd, bfd_reloc_code_real_type  code);
8221
8222 DESCRIPTION
8223         Provides a default relocation lookup routine for any architecture.
8224
8225 */
8226
8227 reloc_howto_type *
8228 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8229 {
8230   /* Very limited support is provided for relocs in generic targets
8231      such as elf32-little.  FIXME: Should we always return NULL?  */
8232   if (code == BFD_RELOC_CTOR
8233       && bfd_arch_bits_per_address (abfd) == 32)
8234     return &bfd_howto_32;
8235   return NULL;
8236 }
8237
8238 /*
8239 FUNCTION
8240         bfd_get_reloc_code_name
8241
8242 SYNOPSIS
8243         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
8244
8245 DESCRIPTION
8246         Provides a printable name for the supplied relocation code.
8247         Useful mainly for printing error messages.
8248 */
8249
8250 const char *
8251 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
8252 {
8253   if (code > BFD_RELOC_UNUSED)
8254     return 0;
8255   return bfd_reloc_code_real_names[code];
8256 }
8257
8258 /*
8259 INTERNAL_FUNCTION
8260         bfd_generic_relax_section
8261
8262 SYNOPSIS
8263         bool bfd_generic_relax_section
8264           (bfd *abfd,
8265            asection *section,
8266            struct bfd_link_info *,
8267            bool *);
8268
8269 DESCRIPTION
8270         Provides default handling for relaxing for back ends which
8271         don't do relaxing.
8272 */
8273
8274 bool
8275 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
8276                            asection *section ATTRIBUTE_UNUSED,
8277                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
8278                            bool *again)
8279 {
8280   if (bfd_link_relocatable (link_info))
8281     (*link_info->callbacks->einfo)
8282       (_("%P%F: --relax and -r may not be used together\n"));
8283
8284   *again = false;
8285   return true;
8286 }
8287
8288 /*
8289 INTERNAL_FUNCTION
8290         bfd_generic_gc_sections
8291
8292 SYNOPSIS
8293         bool bfd_generic_gc_sections
8294           (bfd *, struct bfd_link_info *);
8295
8296 DESCRIPTION
8297         Provides default handling for relaxing for back ends which
8298         don't do section gc -- i.e., does nothing.
8299 */
8300
8301 bool
8302 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
8303                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
8304 {
8305   return true;
8306 }
8307
8308 /*
8309 INTERNAL_FUNCTION
8310         bfd_generic_lookup_section_flags
8311
8312 SYNOPSIS
8313         bool bfd_generic_lookup_section_flags
8314           (struct bfd_link_info *, struct flag_info *, asection *);
8315
8316 DESCRIPTION
8317         Provides default handling for section flags lookup
8318         -- i.e., does nothing.
8319         Returns FALSE if the section should be omitted, otherwise TRUE.
8320 */
8321
8322 bool
8323 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
8324                                   struct flag_info *flaginfo,
8325                                   asection *section ATTRIBUTE_UNUSED)
8326 {
8327   if (flaginfo != NULL)
8328     {
8329       _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported"));
8330       return false;
8331     }
8332   return true;
8333 }
8334
8335 /*
8336 INTERNAL_FUNCTION
8337         bfd_generic_merge_sections
8338
8339 SYNOPSIS
8340         bool bfd_generic_merge_sections
8341           (bfd *, struct bfd_link_info *);
8342
8343 DESCRIPTION
8344         Provides default handling for SEC_MERGE section merging for back ends
8345         which don't have SEC_MERGE support -- i.e., does nothing.
8346 */
8347
8348 bool
8349 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
8350                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
8351 {
8352   return true;
8353 }
8354
8355 /*
8356 INTERNAL_FUNCTION
8357         bfd_generic_get_relocated_section_contents
8358
8359 SYNOPSIS
8360         bfd_byte *bfd_generic_get_relocated_section_contents
8361           (bfd *abfd,
8362            struct bfd_link_info *link_info,
8363            struct bfd_link_order *link_order,
8364            bfd_byte *data,
8365            bool relocatable,
8366            asymbol **symbols);
8367
8368 DESCRIPTION
8369         Provides default handling of relocation effort for back ends
8370         which can't be bothered to do it efficiently.
8371
8372 */
8373
8374 bfd_byte *
8375 bfd_generic_get_relocated_section_contents (bfd *abfd,
8376                                             struct bfd_link_info *link_info,
8377                                             struct bfd_link_order *link_order,
8378                                             bfd_byte *data,
8379                                             bool relocatable,
8380                                             asymbol **symbols)
8381 {
8382   bfd *input_bfd = link_order->u.indirect.section->owner;
8383   asection *input_section = link_order->u.indirect.section;
8384   long reloc_size;
8385   arelent **reloc_vector;
8386   long reloc_count;
8387
8388   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
8389   if (reloc_size < 0)
8390     return NULL;
8391
8392   /* Read in the section.  */
8393   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
8394     return NULL;
8395
8396   if (data == NULL)
8397     return NULL;
8398
8399   if (reloc_size == 0)
8400     return data;
8401
8402   reloc_vector = (arelent **) bfd_malloc (reloc_size);
8403   if (reloc_vector == NULL)
8404     return NULL;
8405
8406   reloc_count = bfd_canonicalize_reloc (input_bfd,
8407                                         input_section,
8408                                         reloc_vector,
8409                                         symbols);
8410   if (reloc_count < 0)
8411     goto error_return;
8412
8413   if (reloc_count > 0)
8414     {
8415       arelent **parent;
8416
8417       for (parent = reloc_vector; *parent != NULL; parent++)
8418         {
8419           char *error_message = NULL;
8420           asymbol *symbol;
8421           bfd_reloc_status_type r;
8422
8423           symbol = *(*parent)->sym_ptr_ptr;
8424           /* PR ld/19628: A specially crafted input file
8425              can result in a NULL symbol pointer here.  */
8426           if (symbol == NULL)
8427             {
8428               link_info->callbacks->einfo
8429                 /* xgettext:c-format */
8430                 (_("%X%P: %pB(%pA): error: relocation for offset %V has no value\n"),
8431                  abfd, input_section, (* parent)->address);
8432               goto error_return;
8433             }
8434
8435           /* Zap reloc field when the symbol is from a discarded
8436              section, ignoring any addend.  Do the same when called
8437              from bfd_simple_get_relocated_section_contents for
8438              undefined symbols in debug sections.  This is to keep
8439              debug info reasonably sane, in particular so that
8440              DW_FORM_ref_addr to another file's .debug_info isn't
8441              confused with an offset into the current file's
8442              .debug_info.  */
8443           if ((symbol->section != NULL && discarded_section (symbol->section))
8444               || (symbol->section == bfd_und_section_ptr
8445                   && (input_section->flags & SEC_DEBUGGING) != 0
8446                   && link_info->input_bfds == link_info->output_bfd))
8447             {
8448               bfd_vma off;
8449               static reloc_howto_type none_howto
8450                 = HOWTO (0, 0, 0, 0, false, 0, complain_overflow_dont, NULL,
8451                          "unused", false, 0, 0, false);
8452
8453               off = ((*parent)->address
8454                      * bfd_octets_per_byte (input_bfd, input_section));
8455               _bfd_clear_contents ((*parent)->howto, input_bfd,
8456                                    input_section, data, off);
8457               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
8458               (*parent)->addend = 0;
8459               (*parent)->howto = &none_howto;
8460               r = bfd_reloc_ok;
8461             }
8462           else
8463             r = bfd_perform_relocation (input_bfd,
8464                                         *parent,
8465                                         data,
8466                                         input_section,
8467                                         relocatable ? abfd : NULL,
8468                                         &error_message);
8469
8470           if (relocatable)
8471             {
8472               asection *os = input_section->output_section;
8473
8474               /* A partial link, so keep the relocs.  */
8475               os->orelocation[os->reloc_count] = *parent;
8476               os->reloc_count++;
8477             }
8478
8479           if (r != bfd_reloc_ok)
8480             {
8481               switch (r)
8482                 {
8483                 case bfd_reloc_undefined:
8484                   (*link_info->callbacks->undefined_symbol)
8485                     (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8486                      input_bfd, input_section, (*parent)->address, true);
8487                   break;
8488                 case bfd_reloc_dangerous:
8489                   BFD_ASSERT (error_message != NULL);
8490                   (*link_info->callbacks->reloc_dangerous)
8491                     (link_info, error_message,
8492                      input_bfd, input_section, (*parent)->address);
8493                   break;
8494                 case bfd_reloc_overflow:
8495                   (*link_info->callbacks->reloc_overflow)
8496                     (link_info, NULL,
8497                      bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8498                      (*parent)->howto->name, (*parent)->addend,
8499                      input_bfd, input_section, (*parent)->address);
8500                   break;
8501                 case bfd_reloc_outofrange:
8502                   /* PR ld/13730:
8503                      This error can result when processing some partially
8504                      complete binaries.  Do not abort, but issue an error
8505                      message instead.  */
8506                   link_info->callbacks->einfo
8507                     /* xgettext:c-format */
8508                     (_("%X%P: %pB(%pA): relocation \"%pR\" goes out of range\n"),
8509                      abfd, input_section, * parent);
8510                   goto error_return;
8511
8512                 case bfd_reloc_notsupported:
8513                   /* PR ld/17512
8514                      This error can result when processing a corrupt binary.
8515                      Do not abort.  Issue an error message instead.  */
8516                   link_info->callbacks->einfo
8517                     /* xgettext:c-format */
8518                     (_("%X%P: %pB(%pA): relocation \"%pR\" is not supported\n"),
8519                      abfd, input_section, * parent);
8520                   goto error_return;
8521
8522                 default:
8523                   /* PR 17512; file: 90c2a92e.
8524                      Report unexpected results, without aborting.  */
8525                   link_info->callbacks->einfo
8526                     /* xgettext:c-format */
8527                     (_("%X%P: %pB(%pA): relocation \"%pR\" returns an unrecognized value %x\n"),
8528                      abfd, input_section, * parent, r);
8529                   break;
8530                 }
8531
8532             }
8533         }
8534     }
8535
8536   free (reloc_vector);
8537   return data;
8538
8539  error_return:
8540   free (reloc_vector);
8541   return NULL;
8542 }
8543
8544 /*
8545 INTERNAL_FUNCTION
8546         _bfd_generic_set_reloc
8547
8548 SYNOPSIS
8549         void _bfd_generic_set_reloc
8550           (bfd *abfd,
8551            sec_ptr section,
8552            arelent **relptr,
8553            unsigned int count);
8554
8555 DESCRIPTION
8556         Installs a new set of internal relocations in SECTION.
8557 */
8558
8559 void
8560 _bfd_generic_set_reloc (bfd *abfd ATTRIBUTE_UNUSED,
8561                         sec_ptr section,
8562                         arelent **relptr,
8563                         unsigned int count)
8564 {
8565   section->orelocation = relptr;
8566   section->reloc_count = count;
8567 }
8568
8569 /*
8570 INTERNAL_FUNCTION
8571         _bfd_unrecognized_reloc
8572
8573 SYNOPSIS
8574         bool _bfd_unrecognized_reloc
8575           (bfd * abfd,
8576            sec_ptr section,
8577            unsigned int r_type);
8578
8579 DESCRIPTION
8580         Reports an unrecognized reloc.
8581         Written as a function in order to reduce code duplication.
8582         Returns FALSE so that it can be called from a return statement.
8583 */
8584
8585 bool
8586 _bfd_unrecognized_reloc (bfd * abfd, sec_ptr section, unsigned int r_type)
8587 {
8588    /* xgettext:c-format */
8589   _bfd_error_handler (_("%pB: unrecognized relocation type %#x in section `%pA'"),
8590                       abfd, r_type, section);
8591
8592   /* PR 21803: Suggest the most likely cause of this error.  */
8593   _bfd_error_handler (_("is this version of the linker - %s - out of date ?"),
8594                       BFD_VERSION_STRING);
8595
8596   bfd_set_error (bfd_error_bad_value);
8597   return false;
8598 }
8599
8600 reloc_howto_type *
8601 _bfd_norelocs_bfd_reloc_type_lookup
8602     (bfd *abfd,
8603      bfd_reloc_code_real_type code ATTRIBUTE_UNUSED)
8604 {
8605   return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8606 }
8607
8608 reloc_howto_type *
8609 _bfd_norelocs_bfd_reloc_name_lookup (bfd *abfd,
8610                                      const char *reloc_name ATTRIBUTE_UNUSED)
8611 {
8612   return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8613 }
8614
8615 long
8616 _bfd_nodynamic_canonicalize_dynamic_reloc (bfd *abfd,
8617                                            arelent **relp ATTRIBUTE_UNUSED,
8618                                            asymbol **symp ATTRIBUTE_UNUSED)
8619 {
8620   return _bfd_long_bfd_n1_error (abfd);
8621 }