gdb/v850-tdep.c

   1 /* Target-dependent code for the NEC V850 for GDB, the GNU debugger.
   2
   3    Copyright (C) 1996-2015 Free Software Foundation, Inc.
   4
   5    This file is part of GDB.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  19
  20 #include "defs.h"
  21 #include "frame.h"
  22 #include "frame-base.h"
  23 #include "trad-frame.h"
  24 #include "frame-unwind.h"
  25 #include "dwarf2-frame.h"
  26 #include "gdbtypes.h"
  27 #include "inferior.h"
  28 #include "gdbcore.h"
  29 #include "arch-utils.h"
  30 #include "regcache.h"
  31 #include "dis-asm.h"
  32 #include "osabi.h"
  33 #include "elf-bfd.h"
  34 #include "elf/v850.h"
  35
  36 enum
  37   {
  38     /* General purpose registers.  */
  39     E_R0_REGNUM,
  40     E_R1_REGNUM,
  41     E_R2_REGNUM,
  42     E_R3_REGNUM, E_SP_REGNUM = E_R3_REGNUM,
  43     E_R4_REGNUM,
  44     E_R5_REGNUM,
  45     E_R6_REGNUM, E_ARG0_REGNUM = E_R6_REGNUM,
  46     E_R7_REGNUM,
  47     E_R8_REGNUM,
  48     E_R9_REGNUM, E_ARGLAST_REGNUM = E_R9_REGNUM,
  49     E_R10_REGNUM, E_V0_REGNUM = E_R10_REGNUM,
  50     E_R11_REGNUM, E_V1_REGNUM = E_R11_REGNUM,
  51     E_R12_REGNUM,
  52     E_R13_REGNUM,
  53     E_R14_REGNUM,
  54     E_R15_REGNUM,
  55     E_R16_REGNUM,
  56     E_R17_REGNUM,
  57     E_R18_REGNUM,
  58     E_R19_REGNUM,
  59     E_R20_REGNUM,
  60     E_R21_REGNUM,
  61     E_R22_REGNUM,
  62     E_R23_REGNUM,
  63     E_R24_REGNUM,
  64     E_R25_REGNUM,
  65     E_R26_REGNUM,
  66     E_R27_REGNUM,
  67     E_R28_REGNUM,
  68     E_R29_REGNUM, E_FP_REGNUM = E_R29_REGNUM,
  69     E_R30_REGNUM, E_EP_REGNUM = E_R30_REGNUM,
  70     E_R31_REGNUM, E_LP_REGNUM = E_R31_REGNUM,
  71
  72     /* System registers - main banks.  */
  73     E_R32_REGNUM, E_SR0_REGNUM = E_R32_REGNUM,
  74     E_R33_REGNUM,
  75     E_R34_REGNUM,
  76     E_R35_REGNUM,
  77     E_R36_REGNUM,
  78     E_R37_REGNUM, E_PS_REGNUM = E_R37_REGNUM,
  79     E_R38_REGNUM,
  80     E_R39_REGNUM,
  81     E_R40_REGNUM,
  82     E_R41_REGNUM,
  83     E_R42_REGNUM,
  84     E_R43_REGNUM,
  85     E_R44_REGNUM,
  86     E_R45_REGNUM,
  87     E_R46_REGNUM,
  88     E_R47_REGNUM,
  89     E_R48_REGNUM,
  90     E_R49_REGNUM,
  91     E_R50_REGNUM,
  92     E_R51_REGNUM,
  93     E_R52_REGNUM, E_CTBP_REGNUM = E_R52_REGNUM,
  94     E_R53_REGNUM,
  95     E_R54_REGNUM,
  96     E_R55_REGNUM,
  97     E_R56_REGNUM,
  98     E_R57_REGNUM,
  99     E_R58_REGNUM,
 100     E_R59_REGNUM,
 101     E_R60_REGNUM,
 102     E_R61_REGNUM,
 103     E_R62_REGNUM,
 104     E_R63_REGNUM,
 105
 106     /* PC.  */
 107     E_R64_REGNUM, E_PC_REGNUM = E_R64_REGNUM,
 108     E_R65_REGNUM,
 109     E_NUM_OF_V850_REGS,
 110     E_NUM_OF_V850E_REGS = E_NUM_OF_V850_REGS,
 111
 112     /* System registers - MPV (PROT00) bank.  */
 113     E_R66_REGNUM = E_NUM_OF_V850_REGS,
 114     E_R67_REGNUM,
 115     E_R68_REGNUM,
 116     E_R69_REGNUM,
 117     E_R70_REGNUM,
 118     E_R71_REGNUM,
 119     E_R72_REGNUM,
 120     E_R73_REGNUM,
 121     E_R74_REGNUM,
 122     E_R75_REGNUM,
 123     E_R76_REGNUM,
 124     E_R77_REGNUM,
 125     E_R78_REGNUM,
 126     E_R79_REGNUM,
 127     E_R80_REGNUM,
 128     E_R81_REGNUM,
 129     E_R82_REGNUM,
 130     E_R83_REGNUM,
 131     E_R84_REGNUM,
 132     E_R85_REGNUM,
 133     E_R86_REGNUM,
 134     E_R87_REGNUM,
 135     E_R88_REGNUM,
 136     E_R89_REGNUM,
 137     E_R90_REGNUM,
 138     E_R91_REGNUM,
 139     E_R92_REGNUM,
 140     E_R93_REGNUM,
 141
 142     /* System registers - MPU (PROT01) bank.  */
 143     E_R94_REGNUM,
 144     E_R95_REGNUM,
 145     E_R96_REGNUM,
 146     E_R97_REGNUM,
 147     E_R98_REGNUM,
 148     E_R99_REGNUM,
 149     E_R100_REGNUM,
 150     E_R101_REGNUM,
 151     E_R102_REGNUM,
 152     E_R103_REGNUM,
 153     E_R104_REGNUM,
 154     E_R105_REGNUM,
 155     E_R106_REGNUM,
 156     E_R107_REGNUM,
 157     E_R108_REGNUM,
 158     E_R109_REGNUM,
 159     E_R110_REGNUM,
 160     E_R111_REGNUM,
 161     E_R112_REGNUM,
 162     E_R113_REGNUM,
 163     E_R114_REGNUM,
 164     E_R115_REGNUM,
 165     E_R116_REGNUM,
 166     E_R117_REGNUM,
 167     E_R118_REGNUM,
 168     E_R119_REGNUM,
 169     E_R120_REGNUM,
 170     E_R121_REGNUM,
 171
 172     /* FPU system registers.  */
 173     E_R122_REGNUM,
 174     E_R123_REGNUM,
 175     E_R124_REGNUM,
 176     E_R125_REGNUM,
 177     E_R126_REGNUM,
 178     E_R127_REGNUM,
 179     E_R128_REGNUM, E_FPSR_REGNUM = E_R128_REGNUM,
 180     E_R129_REGNUM, E_FPEPC_REGNUM = E_R129_REGNUM,
 181     E_R130_REGNUM, E_FPST_REGNUM = E_R130_REGNUM,
 182     E_R131_REGNUM, E_FPCC_REGNUM = E_R131_REGNUM,
 183     E_R132_REGNUM, E_FPCFG_REGNUM = E_R132_REGNUM,
 184     E_R133_REGNUM,
 185     E_R134_REGNUM,
 186     E_R135_REGNUM,
 187     E_R136_REGNUM,
 188     E_R137_REGNUM,
 189     E_R138_REGNUM,
 190     E_R139_REGNUM,
 191     E_R140_REGNUM,
 192     E_R141_REGNUM,
 193     E_R142_REGNUM,
 194     E_R143_REGNUM,
 195     E_R144_REGNUM,
 196     E_R145_REGNUM,
 197     E_R146_REGNUM,
 198     E_R147_REGNUM,
 199     E_R148_REGNUM,
 200     E_R149_REGNUM,
 201     E_NUM_OF_V850E2_REGS,
 202
 203     /* v850e3v5 system registers, selID 1 thru 7.  */
 204     E_SELID_1_R0_REGNUM = E_NUM_OF_V850E2_REGS,
 205     E_SELID_1_R31_REGNUM = E_SELID_1_R0_REGNUM + 31,
 206
 207     E_SELID_2_R0_REGNUM,
 208     E_SELID_2_R31_REGNUM = E_SELID_2_R0_REGNUM + 31,
 209
 210     E_SELID_3_R0_REGNUM,
 211     E_SELID_3_R31_REGNUM = E_SELID_3_R0_REGNUM + 31,
 212
 213     E_SELID_4_R0_REGNUM,
 214     E_SELID_4_R31_REGNUM = E_SELID_4_R0_REGNUM + 31,
 215
 216     E_SELID_5_R0_REGNUM,
 217     E_SELID_5_R31_REGNUM = E_SELID_5_R0_REGNUM + 31,
 218
 219     E_SELID_6_R0_REGNUM,
 220     E_SELID_6_R31_REGNUM = E_SELID_6_R0_REGNUM + 31,
 221
 222     E_SELID_7_R0_REGNUM,
 223     E_SELID_7_R31_REGNUM = E_SELID_7_R0_REGNUM + 31,
 224
 225     /* v850e3v5 vector registers.  */
 226     E_VR0_REGNUM,
 227     E_VR31_REGNUM = E_VR0_REGNUM + 31,
 228
 229     E_NUM_OF_V850E3V5_REGS,
 230
 231     /* Total number of possible registers.  */
 232     E_NUM_REGS = E_NUM_OF_V850E3V5_REGS
 233   };
 234
 235 enum
 236 {
 237   v850_reg_size = 4
 238 };
 239
 240 /* Size of return datatype which fits into all return registers.  */
 241 enum
 242 {
 243   E_MAX_RETTYPE_SIZE_IN_REGS = 2 * v850_reg_size
 244 };
 245
 246 /* When v850 support was added to GCC in the late nineties, the intention
 247    was to follow the Green Hills ABI for v850.  In fact, the authors of
 248    that support at the time thought that they were doing so.  As far as
 249    I can tell, the calling conventions are correct, but the return value
 250    conventions were not quite right.  Over time, the return value code
 251    in this file was modified to mostly reflect what GCC was actually
 252    doing instead of to actually follow the Green Hills ABI as it did
 253    when the code was first written.
 254
 255    Renesas defined the RH850 ABI which they use in their compiler.  It
 256    is similar to the original Green Hills ABI with some minor
 257    differences.  */
 258
 259 enum v850_abi
 260 {
 261   V850_ABI_GCC,
 262   V850_ABI_RH850
 263 };
 264
 265 /* Architecture specific data.  */
 266
 267 struct gdbarch_tdep
 268 {
 269   /* Fields from the ELF header.  */
 270   int e_flags;
 271   int e_machine;
 272
 273   /* Which ABI are we using?  */
 274   enum v850_abi abi;
 275   int eight_byte_align;
 276 };
 277
 278 struct v850_frame_cache
 279 {
 280   /* Base address.  */
 281   CORE_ADDR base;
 282   LONGEST sp_offset;
 283   CORE_ADDR pc;
 284
 285   /* Flag showing that a frame has been created in the prologue code.  */
 286   int uses_fp;
 287
 288   /* Saved registers.  */
 289   struct trad_frame_saved_reg *saved_regs;
 290 };
 291
 292 /* Info gleaned from scanning a function's prologue.  */
 293 struct pifsr            /* Info about one saved register.  */
 294 {
 295   int offset;           /* Offset from sp or fp.  */
 296   int cur_frameoffset;  /* Current frameoffset.  */
 297   int reg;              /* Saved register number.  */
 298 };
 299
 300 static const char *
 301 v850_register_name (struct gdbarch *gdbarch, int regnum)
 302 {
 303   static const char *v850_reg_names[] =
 304   { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
 305     "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
 306     "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
 307     "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
 308     "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
 309     "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
 310     "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23",
 311     "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
 312     "pc", "fp"
 313   };
 314   if (regnum < 0 || regnum > E_NUM_OF_V850_REGS)
 315     return NULL;
 316   return v850_reg_names[regnum];
 317 }
 318
 319 static const char *
 320 v850e_register_name (struct gdbarch *gdbarch, int regnum)
 321 {
 322   static const char *v850e_reg_names[] =
 323   {
 324     "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
 325     "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
 326     "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
 327     "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
 328     "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
 329     "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
 330     "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "sr21", "sr22", "sr23",
 331     "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
 332     "pc", "fp"
 333   };
 334   if (regnum < 0 || regnum > E_NUM_OF_V850E_REGS)
 335     return NULL;
 336   return v850e_reg_names[regnum];
 337 }
 338
 339 static const char *
 340 v850e2_register_name (struct gdbarch *gdbarch, int regnum)
 341 {
 342   static const char *v850e2_reg_names[] =
 343   {
 344     /* General purpose registers.  */
 345     "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
 346     "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
 347     "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
 348     "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
 349
 350     /* System registers - main banks.  */
 351     "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "pid", "cfg",
 352     "", "", "", "sccfg", "scbp", "eiic", "feic", "dbic",
 353     "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "dir", "", "",
 354     "", "", "", "", "eiwr", "fewr", "dbwr", "bsel",
 355
 356
 357     /* PC.  */
 358     "pc", "",
 359
 360     /* System registers - MPV (PROT00) bank.  */
 361     "vsecr", "vstid", "vsadr", "", "vmecr", "vmtid", "vmadr", "",
 362     "vpecr", "vptid", "vpadr", "", "", "", "", "",
 363     "", "", "", "", "", "", "", "",
 364     "mca", "mcs", "mcc", "mcr",
 365
 366     /* System registers - MPU (PROT01) bank.  */
 367     "mpm", "mpc", "tid", "", "", "", "ipa0l", "ipa0u",
 368     "ipa1l", "ipa1u", "ipa2l", "ipa2u", "ipa3l", "ipa3u", "ipa4l", "ipa4u",
 369     "dpa0l", "dpa0u", "dpa1l", "dpa1u", "dpa2l", "dpa2u", "dpa3l", "dpa3u",
 370     "dpa4l", "dpa4u", "dpa5l", "dpa5u",
 371
 372     /* FPU system registers.  */
 373     "", "", "", "", "", "", "fpsr", "fpepc",
 374     "fpst", "fpcc", "fpcfg", "fpec", "", "", "", "",
 375     "", "", "", "", "", "", "", "",
 376     "", "", "", "fpspc"
 377   };
 378   if (regnum < 0 || regnum >= E_NUM_OF_V850E2_REGS)
 379     return NULL;
 380   return v850e2_reg_names[regnum];
 381 }
 382
 383 /* Implement the "register_name" gdbarch method for v850e3v5.  */
 384
 385 static const char *
 386 v850e3v5_register_name (struct gdbarch *gdbarch, int regnum)
 387 {
 388   static const char *v850e3v5_reg_names[] =
 389   {
 390     /* General purpose registers.  */
 391     "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
 392     "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
 393     "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
 394     "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
 395
 396     /* selID 0, not including FPU registers.  The FPU registers are
 397        listed later on.  */
 398     "eipc", "eipsw", "fepc", "fepsw",
 399     "", "psw", "" /* fpsr */, "" /* fpepc */,
 400     "" /* fpst */, "" /* fpcc */, "" /* fpcfg */, "" /* fpec */,
 401     "sesr", "eiic", "feic", "",
 402     "ctpc", "ctpsw", "", "", "ctbp", "", "", "",
 403     "", "", "", "", "eiwr", "fewr", "", "bsel",
 404
 405
 406     /* PC.  */
 407     "pc", "",
 408
 409     /* v850e2 MPV bank.  */
 410     "", "", "", "", "", "", "", "",
 411     "", "", "", "", "", "", "", "",
 412     "", "", "", "", "", "", "", "",
 413     "", "", "", "",
 414
 415     /* Skip v850e2 MPU bank.  It's tempting to reuse these, but we need
 416        32 entries for this bank.  */
 417     "", "", "", "", "", "", "", "",
 418     "", "", "", "", "", "", "", "",
 419     "", "", "", "", "", "", "", "",
 420     "", "", "", "",
 421
 422     /* FPU system registers.  These are actually in selID 0, but
 423        are placed here to preserve register numbering compatibility
 424        with previous architectures.  */
 425     "", "", "", "", "", "", "fpsr", "fpepc",
 426     "fpst", "fpcc", "fpcfg", "fpec", "", "", "", "",
 427     "", "", "", "", "", "", "", "",
 428     "", "", "", "",
 429
 430     /* selID 1.  */
 431     "mcfg0", "mcfg1", "rbase", "ebase", "intbp", "mctl", "pid", "fpipr",
 432     "", "", "tcsel", "sccfg", "scbp", "hvccfg", "hvcbp", "vsel",
 433     "vmprt0", "vmprt1", "vmprt2", "", "", "", "", "vmscctl",
 434     "vmsctbl0", "vmsctbl1", "vmsctbl2", "vmsctbl3", "", "", "", "",
 435
 436     /* selID 2.  */
 437     "htcfg0", "", "", "", "", "htctl", "mea", "asid",
 438     "mei", "ispr", "pmr", "icsr", "intcfg", "", "", "",
 439     "tlbsch", "", "", "", "", "", "", "htscctl",
 440     "htsctbl0", "htsctbl1", "htsctbl2", "htsctbl3",
 441     "htsctbl4", "htsctbl5", "htsctbl6", "htsctbl7",
 442
 443     /* selID 3.  */
 444     "", "", "", "", "", "", "", "",
 445     "", "", "", "", "", "", "", "",
 446     "", "", "", "", "", "", "", "",
 447     "", "", "", "", "", "", "", "",
 448
 449     /* selID 4.  */
 450     "tlbidx", "", "", "", "telo0", "telo1", "tehi0", "tehi1",
 451     "", "", "tlbcfg", "", "bwerrl", "bwerrh", "brerrl", "brerrh",
 452     "ictagl", "ictagh", "icdatl", "icdath",
 453     "dctagl", "dctagh", "dcdatl", "dcdath",
 454     "icctrl", "dcctrl", "iccfg", "dccfg", "icerr", "dcerr", "", "",
 455
 456     /* selID 5.  */
 457     "mpm", "mprc", "", "", "mpbrgn", "mptrgn", "", "",
 458     "mca", "mcs", "mcc", "mcr", "", "", "", "",
 459     "", "", "", "", "mpprt0", "mpprt1", "mpprt2", "",
 460     "", "", "", "", "", "", "", "",
 461
 462     /* selID 6.  */
 463     "mpla0", "mpua0", "mpat0", "", "mpla1", "mpua1", "mpat1", "",
 464     "mpla2", "mpua2", "mpat2", "", "mpla3", "mpua3", "mpat3", "",
 465     "mpla4", "mpua4", "mpat4", "", "mpla5", "mpua5", "mpat5", "",
 466     "mpla6", "mpua6", "mpat6", "", "mpla7", "mpua7", "mpat7", "",
 467
 468     /* selID 7.  */
 469     "mpla8", "mpua8", "mpat8", "", "mpla9", "mpua9", "mpat9", "",
 470     "mpla10", "mpua10", "mpat10", "", "mpla11", "mpua11", "mpat11", "",
 471     "mpla12", "mpua12", "mpat12", "", "mpla13", "mpua13", "mpat13", "",
 472     "mpla14", "mpua14", "mpat14", "", "mpla15", "mpua15", "mpat15", "",
 473
 474     /* Vector Registers */
 475     "vr0", "vr1", "vr2", "vr3", "vr4", "vr5", "vr6", "vr7",
 476     "vr8", "vr9", "vr10", "vr11", "vr12", "vr13", "vr14", "vr15",
 477     "vr16", "vr17", "vr18", "vr19", "vr20", "vr21", "vr22", "vr23",
 478     "vr24", "vr25", "vr26", "vr27", "vr28", "vr29", "vr30", "vr31",
 479   };
 480
 481   if (regnum < 0 || regnum >= E_NUM_OF_V850E3V5_REGS)
 482     return NULL;
 483   return v850e3v5_reg_names[regnum];
 484 }
 485
 486 /* Returns the default type for register N.  */
 487
 488 static struct type *
 489 v850_register_type (struct gdbarch *gdbarch, int regnum)
 490 {
 491   if (regnum == E_PC_REGNUM)
 492     return builtin_type (gdbarch)->builtin_func_ptr;
 493   else if (E_VR0_REGNUM <= regnum && regnum <= E_VR31_REGNUM)
 494     return builtin_type (gdbarch)->builtin_uint64;
 495   return builtin_type (gdbarch)->builtin_int32;
 496 }
 497
 498 static int
 499 v850_type_is_scalar (struct type *t)
 500 {
 501   return (TYPE_CODE (t) != TYPE_CODE_STRUCT
 502           && TYPE_CODE (t) != TYPE_CODE_UNION
 503           && TYPE_CODE (t) != TYPE_CODE_ARRAY);
 504 }
 505
 506 /* Should call_function allocate stack space for a struct return?  */
 507
 508 static int
 509 v850_use_struct_convention (struct gdbarch *gdbarch, struct type *type)
 510 {
 511   int i;
 512   struct type *fld_type, *tgt_type;
 513
 514   if (gdbarch_tdep (gdbarch)->abi == V850_ABI_RH850)
 515     {
 516       if (v850_type_is_scalar (type) && TYPE_LENGTH(type) <= 8)
 517         return 0;
 518
 519       /* Structs are never returned in registers for this ABI.  */
 520       return 1;
 521     }
 522   /* 1. The value is greater than 8 bytes -> returned by copying.  */
 523   if (TYPE_LENGTH (type) > 8)
 524     return 1;
 525
 526   /* 2. The value is a single basic type -> returned in register.  */
 527   if (v850_type_is_scalar (type))
 528     return 0;
 529
 530   /* The value is a structure or union with a single element and that
 531      element is either a single basic type or an array of a single basic
 532      type whose size is greater than or equal to 4 -> returned in register.  */
 533   if ((TYPE_CODE (type) == TYPE_CODE_STRUCT
 534        || TYPE_CODE (type) == TYPE_CODE_UNION)
 535        && TYPE_NFIELDS (type) == 1)
 536     {
 537       fld_type = TYPE_FIELD_TYPE (type, 0);
 538       if (v850_type_is_scalar (fld_type) && TYPE_LENGTH (fld_type) >= 4)
 539         return 0;
 540
 541       if (TYPE_CODE (fld_type) == TYPE_CODE_ARRAY)
 542         {
 543           tgt_type = TYPE_TARGET_TYPE (fld_type);
 544           if (v850_type_is_scalar (tgt_type) && TYPE_LENGTH (tgt_type) >= 4)
 545             return 0;
 546         }
 547     }
 548
 549   /* The value is a structure whose first element is an integer or a float,
 550      and which contains no arrays of more than two elements -> returned in
 551      register.  */
 552   if (TYPE_CODE (type) == TYPE_CODE_STRUCT
 553       && v850_type_is_scalar (TYPE_FIELD_TYPE (type, 0))
 554       && TYPE_LENGTH (TYPE_FIELD_TYPE (type, 0)) == 4)
 555     {
 556       for (i = 1; i < TYPE_NFIELDS (type); ++i)
 557         {
 558           fld_type = TYPE_FIELD_TYPE (type, 0);
 559           if (TYPE_CODE (fld_type) == TYPE_CODE_ARRAY)
 560             {
 561               tgt_type = TYPE_TARGET_TYPE (fld_type);
 562               if (TYPE_LENGTH (fld_type) >= 0 && TYPE_LENGTH (tgt_type) >= 0
 563                   && TYPE_LENGTH (fld_type) / TYPE_LENGTH (tgt_type) > 2)
 564                 return 1;
 565             }
 566         }
 567       return 0;
 568     }
 569
 570   /* The value is a union which contains at least one field which
 571      would be returned in registers according to these rules ->
 572      returned in register.  */
 573   if (TYPE_CODE (type) == TYPE_CODE_UNION)
 574     {
 575       for (i = 0; i < TYPE_NFIELDS (type); ++i)
 576         {
 577           fld_type = TYPE_FIELD_TYPE (type, 0);
 578           if (!v850_use_struct_convention (gdbarch, fld_type))
 579             return 0;
 580         }
 581     }
 582
 583   return 1;
 584 }
 585
 586 /* Structure for mapping bits in register lists to register numbers.  */
 587
 588 struct reg_list
 589 {
 590   long mask;
 591   int regno;
 592 };
 593
 594 /* Helper function for v850_scan_prologue to handle prepare instruction.  */
 595
 596 static void
 597 v850_handle_prepare (int insn, int insn2, CORE_ADDR * current_pc_ptr,
 598                      struct v850_frame_cache *pi, struct pifsr **pifsr_ptr)
 599 {
 600   CORE_ADDR current_pc = *current_pc_ptr;
 601   struct pifsr *pifsr = *pifsr_ptr;
 602   long next = insn2 & 0xffff;
 603   long list12 = ((insn & 1) << 16) + (next & 0xffe0);
 604   long offset = (insn & 0x3e) << 1;
 605   static struct reg_list reg_table[] =
 606   {
 607     {0x00800, 20},              /* r20 */
 608     {0x00400, 21},              /* r21 */
 609     {0x00200, 22},              /* r22 */
 610     {0x00100, 23},              /* r23 */
 611     {0x08000, 24},              /* r24 */
 612     {0x04000, 25},              /* r25 */
 613     {0x02000, 26},              /* r26 */
 614     {0x01000, 27},              /* r27 */
 615     {0x00080, 28},              /* r28 */
 616     {0x00040, 29},              /* r29 */
 617     {0x10000, 30},              /* ep */
 618     {0x00020, 31},              /* lp */
 619     {0, 0}                      /* end of table */
 620   };
 621   int i;
 622
 623   if ((next & 0x1f) == 0x0b)            /* skip imm16 argument */
 624     current_pc += 2;
 625   else if ((next & 0x1f) == 0x13)       /* skip imm16 argument */
 626     current_pc += 2;
 627   else if ((next & 0x1f) == 0x1b)       /* skip imm32 argument */
 628     current_pc += 4;
 629
 630   /* Calculate the total size of the saved registers, and add it to the
 631      immediate value used to adjust SP.  */
 632   for (i = 0; reg_table[i].mask != 0; i++)
 633     if (list12 & reg_table[i].mask)
 634       offset += v850_reg_size;
 635   pi->sp_offset -= offset;
 636
 637   /* Calculate the offsets of the registers relative to the value the SP
 638      will have after the registers have been pushed and the imm5 value has
 639      been subtracted from it.  */
 640   if (pifsr)
 641     {
 642       for (i = 0; reg_table[i].mask != 0; i++)
 643         {
 644           if (list12 & reg_table[i].mask)
 645             {
 646               int reg = reg_table[i].regno;
 647               offset -= v850_reg_size;
 648               pifsr->reg = reg;
 649               pifsr->offset = offset;
 650               pifsr->cur_frameoffset = pi->sp_offset;
 651               pifsr++;
 652             }
 653         }
 654     }
 655
 656   /* Set result parameters.  */
 657   *current_pc_ptr = current_pc;
 658   *pifsr_ptr = pifsr;
 659 }
 660
 661
 662 /* Helper function for v850_scan_prologue to handle pushm/pushl instructions.
 663    The SR bit of the register list is not supported.  gcc does not generate
 664    this bit.  */
 665
 666 static void
 667 v850_handle_pushm (int insn, int insn2, struct v850_frame_cache *pi,
 668                    struct pifsr **pifsr_ptr)
 669 {
 670   struct pifsr *pifsr = *pifsr_ptr;
 671   long list12 = ((insn & 0x0f) << 16) + (insn2 & 0xfff0);
 672   long offset = 0;
 673   static struct reg_list pushml_reg_table[] =
 674   {
 675     {0x80000, E_PS_REGNUM},     /* PSW */
 676     {0x40000, 1},               /* r1 */
 677     {0x20000, 2},               /* r2 */
 678     {0x10000, 3},               /* r3 */
 679     {0x00800, 4},               /* r4 */
 680     {0x00400, 5},               /* r5 */
 681     {0x00200, 6},               /* r6 */
 682     {0x00100, 7},               /* r7 */
 683     {0x08000, 8},               /* r8 */
 684     {0x04000, 9},               /* r9 */
 685     {0x02000, 10},              /* r10 */
 686     {0x01000, 11},              /* r11 */
 687     {0x00080, 12},              /* r12 */
 688     {0x00040, 13},              /* r13 */
 689     {0x00020, 14},              /* r14 */
 690     {0x00010, 15},              /* r15 */
 691     {0, 0}                      /* end of table */
 692   };
 693   static struct reg_list pushmh_reg_table[] =
 694   {
 695     {0x80000, 16},              /* r16 */
 696     {0x40000, 17},              /* r17 */
 697     {0x20000, 18},              /* r18 */
 698     {0x10000, 19},              /* r19 */
 699     {0x00800, 20},              /* r20 */
 700     {0x00400, 21},              /* r21 */
 701     {0x00200, 22},              /* r22 */
 702     {0x00100, 23},              /* r23 */
 703     {0x08000, 24},              /* r24 */
 704     {0x04000, 25},              /* r25 */
 705     {0x02000, 26},              /* r26 */
 706     {0x01000, 27},              /* r27 */
 707     {0x00080, 28},              /* r28 */
 708     {0x00040, 29},              /* r29 */
 709     {0x00010, 30},              /* r30 */
 710     {0x00020, 31},              /* r31 */
 711     {0, 0}                      /* end of table */
 712   };
 713   struct reg_list *reg_table;
 714   int i;
 715
 716   /* Is this a pushml or a pushmh?  */
 717   if ((insn2 & 7) == 1)
 718     reg_table = pushml_reg_table;
 719   else
 720     reg_table = pushmh_reg_table;
 721
 722   /* Calculate the total size of the saved registers, and add it to the
 723      immediate value used to adjust SP.  */
 724   for (i = 0; reg_table[i].mask != 0; i++)
 725     if (list12 & reg_table[i].mask)
 726       offset += v850_reg_size;
 727   pi->sp_offset -= offset;
 728
 729   /* Calculate the offsets of the registers relative to the value the SP
 730      will have after the registers have been pushed and the imm5 value is
 731      subtracted from it.  */
 732   if (pifsr)
 733     {
 734       for (i = 0; reg_table[i].mask != 0; i++)
 735         {
 736           if (list12 & reg_table[i].mask)
 737             {
 738               int reg = reg_table[i].regno;
 739               offset -= v850_reg_size;
 740               pifsr->reg = reg;
 741               pifsr->offset = offset;
 742               pifsr->cur_frameoffset = pi->sp_offset;
 743               pifsr++;
 744             }
 745         }
 746     }
 747
 748   /* Set result parameters.  */
 749   *pifsr_ptr = pifsr;
 750 }
 751
 752 /* Helper function to evaluate if register is one of the "save" registers.
 753    This allows to simplify conditionals in v850_analyze_prologue a lot.  */
 754
 755 static int
 756 v850_is_save_register (int reg)
 757 {
 758  /* The caller-save registers are R2, R20 - R29 and R31.  All other
 759     registers are either special purpose (PC, SP), argument registers,
 760     or just considered free for use in the caller.  */
 761  return reg == E_R2_REGNUM
 762         || (reg >= E_R20_REGNUM && reg <= E_R29_REGNUM)
 763         || reg == E_R31_REGNUM;
 764 }
 765
 766 /* Scan the prologue of the function that contains PC, and record what
 767    we find in PI.  Returns the pc after the prologue.  Note that the
 768    addresses saved in frame->saved_regs are just frame relative (negative
 769    offsets from the frame pointer).  This is because we don't know the
 770    actual value of the frame pointer yet.  In some circumstances, the
 771    frame pointer can't be determined till after we have scanned the
 772    prologue.  */
 773
 774 static CORE_ADDR
 775 v850_analyze_prologue (struct gdbarch *gdbarch,
 776                        CORE_ADDR func_addr, CORE_ADDR pc,
 777                        struct v850_frame_cache *pi, ULONGEST ctbp)
 778 {
 779   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
 780   CORE_ADDR prologue_end, current_pc;
 781   struct pifsr pifsrs[E_NUM_REGS + 1];
 782   struct pifsr *pifsr, *pifsr_tmp;
 783   int ep_used;
 784   int reg;
 785   CORE_ADDR save_pc, save_end;
 786   int regsave_func_p;
 787   int r12_tmp;
 788
 789   memset (&pifsrs, 0, sizeof pifsrs);
 790   pifsr = &pifsrs[0];
 791
 792   prologue_end = pc;
 793
 794   /* Now, search the prologue looking for instructions that setup fp, save
 795      rp, adjust sp and such.  We also record the frame offset of any saved
 796      registers.  */
 797
 798   pi->sp_offset = 0;
 799   pi->uses_fp = 0;
 800   ep_used = 0;
 801   regsave_func_p = 0;
 802   save_pc = 0;
 803   save_end = 0;
 804   r12_tmp = 0;
 805
 806   for (current_pc = func_addr; current_pc < prologue_end;)
 807     {
 808       int insn;
 809       int insn2 = -1; /* dummy value */
 810
 811       insn = read_memory_integer (current_pc, 2, byte_order);
 812       current_pc += 2;
 813       if ((insn & 0x0780) >= 0x0600)    /* Four byte instruction?  */
 814         {
 815           insn2 = read_memory_integer (current_pc, 2, byte_order);
 816           current_pc += 2;
 817         }
 818
 819       if ((insn & 0xffc0) == ((10 << 11) | 0x0780) && !regsave_func_p)
 820         {                       /* jarl <func>,10 */
 821           long low_disp = insn2 & ~(long) 1;
 822           long disp = (((((insn & 0x3f) << 16) + low_disp)
 823                         & ~(long) 1) ^ 0x00200000) - 0x00200000;
 824
 825           save_pc = current_pc;
 826           save_end = prologue_end;
 827           regsave_func_p = 1;
 828           current_pc += disp - 4;
 829           prologue_end = (current_pc
 830                           + (2 * 3)     /* moves to/from ep */
 831                           + 4           /* addi <const>,sp,sp */
 832                           + 2           /* jmp [r10] */
 833                           + (2 * 12)    /* sst.w to save r2, r20-r29, r31 */
 834                           + 20);        /* slop area */
 835         }
 836       else if ((insn & 0xffc0) == 0x0200 && !regsave_func_p)
 837         {                       /* callt <imm6> */
 838           long adr = ctbp + ((insn & 0x3f) << 1);
 839
 840           save_pc = current_pc;
 841           save_end = prologue_end;
 842           regsave_func_p = 1;
 843           current_pc = ctbp + (read_memory_unsigned_integer (adr, 2, byte_order)
 844                                & 0xffff);
 845           prologue_end = (current_pc
 846                           + (2 * 3)     /* prepare list2,imm5,sp/imm */
 847                           + 4           /* ctret */
 848                           + 20);        /* slop area */
 849           continue;
 850         }
 851       else if ((insn & 0xffc0) == 0x0780)       /* prepare list2,imm5 */
 852         {
 853           v850_handle_prepare (insn, insn2, &current_pc, pi, &pifsr);
 854           continue;
 855         }
 856       else if (insn == 0x07e0 && regsave_func_p && insn2 == 0x0144)
 857         {                       /* ctret after processing register save.  */
 858           current_pc = save_pc;
 859           prologue_end = save_end;
 860           regsave_func_p = 0;
 861           continue;
 862         }
 863       else if ((insn & 0xfff0) == 0x07e0 && (insn2 & 5) == 1)
 864         {                       /* pushml, pushmh */
 865           v850_handle_pushm (insn, insn2, pi, &pifsr);
 866           continue;
 867         }
 868       else if ((insn & 0xffe0) == 0x0060 && regsave_func_p)
 869         {                       /* jmp after processing register save.  */
 870           current_pc = save_pc;
 871           prologue_end = save_end;
 872           regsave_func_p = 0;
 873           continue;
 874         }
 875       else if ((insn & 0x07c0) == 0x0780        /* jarl or jr */
 876                || (insn & 0xffe0) == 0x0060     /* jmp */
 877                || (insn & 0x0780) == 0x0580)    /* branch */
 878         {
 879           break;                /* Ran into end of prologue.  */
 880         }
 881
 882       else if ((insn & 0xffe0) == ((E_SP_REGNUM << 11) | 0x0240))
 883         /* add <imm>,sp */
 884         pi->sp_offset += ((insn & 0x1f) ^ 0x10) - 0x10;
 885       else if (insn == ((E_SP_REGNUM << 11) | 0x0600 | E_SP_REGNUM))
 886         /* addi <imm>,sp,sp */
 887         pi->sp_offset += insn2;
 888       else if (insn == ((E_FP_REGNUM << 11) | 0x0000 | E_SP_REGNUM))
 889         /* mov sp,fp */
 890         pi->uses_fp = 1;
 891       else if (insn == ((E_R12_REGNUM << 11) | 0x0640 | E_R0_REGNUM))
 892         /* movhi hi(const),r0,r12 */
 893         r12_tmp = insn2 << 16;
 894       else if (insn == ((E_R12_REGNUM << 11) | 0x0620 | E_R12_REGNUM))
 895         /* movea lo(const),r12,r12 */
 896         r12_tmp += insn2;
 897       else if (insn == ((E_SP_REGNUM << 11) | 0x01c0 | E_R12_REGNUM) && r12_tmp)
 898         /* add r12,sp */
 899         pi->sp_offset += r12_tmp;
 900       else if (insn == ((E_EP_REGNUM << 11) | 0x0000 | E_SP_REGNUM))
 901         /* mov sp,ep */
 902         ep_used = 1;
 903       else if (insn == ((E_EP_REGNUM << 11) | 0x0000 | E_R1_REGNUM))
 904         /* mov r1,ep */
 905         ep_used = 0;
 906       else if (((insn & 0x07ff) == (0x0760 | E_SP_REGNUM)
 907                 || (pi->uses_fp
 908                     && (insn & 0x07ff) == (0x0760 | E_FP_REGNUM)))
 909                && pifsr
 910                && v850_is_save_register (reg = (insn >> 11) & 0x1f))
 911         {
 912           /* st.w <reg>,<offset>[sp] or st.w <reg>,<offset>[fp] */
 913           pifsr->reg = reg;
 914           pifsr->offset = insn2 & ~1;
 915           pifsr->cur_frameoffset = pi->sp_offset;
 916           pifsr++;
 917         }
 918       else if (ep_used
 919                && ((insn & 0x0781) == 0x0501)
 920                && pifsr
 921                && v850_is_save_register (reg = (insn >> 11) & 0x1f))
 922         {
 923           /* sst.w <reg>,<offset>[ep] */
 924           pifsr->reg = reg;
 925           pifsr->offset = (insn & 0x007e) << 1;
 926           pifsr->cur_frameoffset = pi->sp_offset;
 927           pifsr++;
 928         }
 929     }
 930
 931   /* Fix up any offsets to the final offset.  If a frame pointer was created,
 932      use it instead of the stack pointer.  */
 933   for (pifsr_tmp = pifsrs; pifsr_tmp != pifsr; pifsr_tmp++)
 934     {
 935       pifsr_tmp->offset -= pi->sp_offset - pifsr_tmp->cur_frameoffset;
 936       pi->saved_regs[pifsr_tmp->reg].addr = pifsr_tmp->offset;
 937     }
 938
 939   return current_pc;
 940 }
 941
 942 /* Return the address of the first code past the prologue of the function.  */
 943
 944 static CORE_ADDR
 945 v850_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
 946 {
 947   CORE_ADDR func_addr, func_end;
 948
 949   /* See what the symbol table says.  */
 950
 951   if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
 952     {
 953       struct symtab_and_line sal;
 954
 955       sal = find_pc_line (func_addr, 0);
 956       if (sal.line != 0 && sal.end < func_end)
 957         return sal.end;
 958
 959       /* Either there's no line info, or the line after the prologue is after
 960          the end of the function.  In this case, there probably isn't a
 961          prologue.  */
 962       return pc;
 963     }
 964
 965   /* We can't find the start of this function, so there's nothing we
 966      can do.  */
 967   return pc;
 968 }
 969
 970 /* Return 1 if the data structure has any 8-byte fields that'll require
 971    the entire data structure to be aligned.  Otherwise, return 0.  */
 972
 973 static int
 974 v850_eight_byte_align_p (struct type *type)
 975 {
 976   type = check_typedef (type);
 977
 978   if (v850_type_is_scalar (type))
 979     return (TYPE_LENGTH (type) == 8);
 980   else
 981     {
 982       int i;
 983
 984       for (i = 0; i < TYPE_NFIELDS (type); i++)
 985         {
 986           if (v850_eight_byte_align_p (TYPE_FIELD_TYPE (type, i)))
 987             return 1;
 988         }
 989     }
 990   return 0;
 991 }
 992
 993 static CORE_ADDR
 994 v850_frame_align (struct gdbarch *ignore, CORE_ADDR sp)
 995 {
 996   return sp & ~3;
 997 }
 998
 999 /* Setup arguments and LP for a call to the target.  First four args
1000    go in R6->R9, subsequent args go into sp + 16 -> sp + ...  Structs
1001    are passed by reference.  64 bit quantities (doubles and long longs)
1002    may be split between the regs and the stack.  When calling a function
1003    that returns a struct, a pointer to the struct is passed in as a secret
1004    first argument (always in R6).
1005
1006    Stack space for the args has NOT been allocated: that job is up to us.  */
1007
1008 static CORE_ADDR
1009 v850_push_dummy_call (struct gdbarch *gdbarch,
1010                       struct value *function,
1011                       struct regcache *regcache,
1012                       CORE_ADDR bp_addr,
1013                       int nargs,
1014                       struct value **args,
1015                       CORE_ADDR sp,
1016                       int struct_return,
1017                       CORE_ADDR struct_addr)
1018 {
1019   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1020   int argreg;
1021   int argnum;
1022   int len = 0;
1023   int stack_offset;
1024
1025   if (gdbarch_tdep (gdbarch)->abi == V850_ABI_RH850)
1026     stack_offset = 0;
1027   else
1028   /* The offset onto the stack at which we will start copying parameters
1029      (after the registers are used up) begins at 16 rather than at zero.
1030      That's how the ABI is defined, though there's no indication that these
1031      16 bytes are used for anything, not even for saving incoming
1032      argument registers.  */
1033   stack_offset = 16;
1034
1035   /* Now make space on the stack for the args.  */
1036   for (argnum = 0; argnum < nargs; argnum++)
1037     len += ((TYPE_LENGTH (value_type (args[argnum])) + 3) & ~3);
1038   sp -= len + stack_offset;
1039
1040   argreg = E_ARG0_REGNUM;
1041   /* The struct_return pointer occupies the first parameter register.  */
1042   if (struct_return)
1043     regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
1044
1045   /* Now load as many as possible of the first arguments into
1046      registers, and push the rest onto the stack.  There are 16 bytes
1047      in four registers available.  Loop thru args from first to last.  */
1048   for (argnum = 0; argnum < nargs; argnum++)
1049     {
1050       int len;
1051       gdb_byte *val;
1052       gdb_byte valbuf[v850_reg_size];
1053
1054       if (!v850_type_is_scalar (value_type (*args))
1055          && gdbarch_tdep (gdbarch)->abi == V850_ABI_GCC
1056           && TYPE_LENGTH (value_type (*args)) > E_MAX_RETTYPE_SIZE_IN_REGS)
1057         {
1058           store_unsigned_integer (valbuf, 4, byte_order,
1059                                   value_address (*args));
1060           len = 4;
1061           val = valbuf;
1062         }
1063       else
1064         {
1065           len = TYPE_LENGTH (value_type (*args));
1066           val = (gdb_byte *) value_contents (*args);
1067         }
1068
1069       if (gdbarch_tdep (gdbarch)->eight_byte_align
1070           && v850_eight_byte_align_p (value_type (*args)))
1071         {
1072           if (argreg <= E_ARGLAST_REGNUM && (argreg & 1))
1073             argreg++;
1074           else if (stack_offset & 0x4)
1075             stack_offset += 4;
1076         }
1077
1078       while (len > 0)
1079         if (argreg <= E_ARGLAST_REGNUM)
1080           {
1081             CORE_ADDR regval;
1082
1083             regval = extract_unsigned_integer (val, v850_reg_size, byte_order);
1084             regcache_cooked_write_unsigned (regcache, argreg, regval);
1085
1086             len -= v850_reg_size;
1087             val += v850_reg_size;
1088             argreg++;
1089           }
1090         else
1091           {
1092             write_memory (sp + stack_offset, val, 4);
1093
1094             len -= 4;
1095             val += 4;
1096             stack_offset += 4;
1097           }
1098       args++;
1099     }
1100
1101   /* Store return address.  */
1102   regcache_cooked_write_unsigned (regcache, E_LP_REGNUM, bp_addr);
1103
1104   /* Update stack pointer.  */
1105   regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
1106
1107   return sp;
1108 }
1109
1110 static void
1111 v850_extract_return_value (struct type *type, struct regcache *regcache,
1112                            gdb_byte *valbuf)
1113 {
1114   struct gdbarch *gdbarch = get_regcache_arch (regcache);
1115   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1116   int len = TYPE_LENGTH (type);
1117
1118   if (len <= v850_reg_size)
1119     {
1120       ULONGEST val;
1121
1122       regcache_cooked_read_unsigned (regcache, E_V0_REGNUM, &val);
1123       store_unsigned_integer (valbuf, len, byte_order, val);
1124     }
1125   else if (len <= 2 * v850_reg_size)
1126     {
1127       int i, regnum = E_V0_REGNUM;
1128       gdb_byte buf[v850_reg_size];
1129       for (i = 0; len > 0; i += 4, len -= 4)
1130         {
1131           regcache_raw_read (regcache, regnum++, buf);
1132           memcpy (valbuf + i, buf, len > 4 ? 4 : len);
1133         }
1134     }
1135 }
1136
1137 static void
1138 v850_store_return_value (struct type *type, struct regcache *regcache,
1139                          const gdb_byte *valbuf)
1140 {
1141   struct gdbarch *gdbarch = get_regcache_arch (regcache);
1142   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1143   int len = TYPE_LENGTH (type);
1144
1145   if (len <= v850_reg_size)
1146       regcache_cooked_write_unsigned
1147         (regcache, E_V0_REGNUM,
1148          extract_unsigned_integer (valbuf, len, byte_order));
1149   else if (len <= 2 * v850_reg_size)
1150     {
1151       int i, regnum = E_V0_REGNUM;
1152       for (i = 0; i < len; i += 4)
1153         regcache_raw_write (regcache, regnum++, valbuf + i);
1154     }
1155 }
1156
1157 static enum return_value_convention
1158 v850_return_value (struct gdbarch *gdbarch, struct value *function,
1159                    struct type *type, struct regcache *regcache,
1160                    gdb_byte *readbuf, const gdb_byte *writebuf)
1161 {
1162   if (v850_use_struct_convention (gdbarch, type))
1163     return RETURN_VALUE_STRUCT_CONVENTION;
1164   if (writebuf)
1165     v850_store_return_value (type, regcache, writebuf);
1166   else if (readbuf)
1167     v850_extract_return_value (type, regcache, readbuf);
1168   return RETURN_VALUE_REGISTER_CONVENTION;
1169 }
1170
1171 static const unsigned char *
1172 v850_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr,
1173                          int *lenptr)
1174 {
1175   static unsigned char breakpoint[] = { 0x85, 0x05 };
1176
1177   *lenptr = sizeof (breakpoint);
1178   return breakpoint;
1179 }
1180
1181 /* Implement software breakpoints by using the dbtrap instruction.
1182    Older architectures had no such instruction.  For those, an
1183    unconditional branch to self instruction is used.  */
1184
1185 static const unsigned char *
1186 v850_dbtrap_breakpoint_from_pc (struct gdbarch *gdbarch,
1187                                 CORE_ADDR *pcptr, int *lenptr)
1188 {
1189   static unsigned char breakpoint[] = { 0x40, 0xf8 };
1190
1191   *lenptr = sizeof (breakpoint);
1192   return breakpoint;
1193 }
1194
1195 static struct v850_frame_cache *
1196 v850_alloc_frame_cache (struct frame_info *this_frame)
1197 {
1198   struct v850_frame_cache *cache;
1199
1200   cache = FRAME_OBSTACK_ZALLOC (struct v850_frame_cache);
1201   cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1202
1203   /* Base address.  */
1204   cache->base = 0;
1205   cache->sp_offset = 0;
1206   cache->pc = 0;
1207
1208   /* Frameless until proven otherwise.  */
1209   cache->uses_fp = 0;
1210
1211   return cache;
1212 }
1213
1214 static struct v850_frame_cache *
1215 v850_frame_cache (struct frame_info *this_frame, void **this_cache)
1216 {
1217   struct gdbarch *gdbarch = get_frame_arch (this_frame);
1218   struct v850_frame_cache *cache;
1219   CORE_ADDR current_pc;
1220   int i;
1221
1222   if (*this_cache)
1223     return *this_cache;
1224
1225   cache = v850_alloc_frame_cache (this_frame);
1226   *this_cache = cache;
1227
1228   /* In principle, for normal frames, fp holds the frame pointer,
1229      which holds the base address for the current stack frame.
1230      However, for functions that don't need it, the frame pointer is
1231      optional.  For these "frameless" functions the frame pointer is
1232      actually the frame pointer of the calling frame.  */
1233   cache->base = get_frame_register_unsigned (this_frame, E_FP_REGNUM);
1234   if (cache->base == 0)
1235     return cache;
1236
1237   cache->pc = get_frame_func (this_frame);
1238   current_pc = get_frame_pc (this_frame);
1239   if (cache->pc != 0)
1240     {
1241       ULONGEST ctbp;
1242       ctbp = get_frame_register_unsigned (this_frame, E_CTBP_REGNUM);
1243       v850_analyze_prologue (gdbarch, cache->pc, current_pc, cache, ctbp);
1244     }
1245
1246   if (!cache->uses_fp)
1247     {
1248       /* We didn't find a valid frame, which means that CACHE->base
1249          currently holds the frame pointer for our calling frame.  If
1250          we're at the start of a function, or somewhere half-way its
1251          prologue, the function's frame probably hasn't been fully
1252          setup yet.  Try to reconstruct the base address for the stack
1253          frame by looking at the stack pointer.  For truly "frameless"
1254          functions this might work too.  */
1255       cache->base = get_frame_register_unsigned (this_frame, E_SP_REGNUM);
1256     }
1257
1258   /* Now that we have the base address for the stack frame we can
1259      calculate the value of sp in the calling frame.  */
1260   trad_frame_set_value (cache->saved_regs, E_SP_REGNUM,
1261                         cache->base - cache->sp_offset);
1262
1263   /* Adjust all the saved registers such that they contain addresses
1264      instead of offsets.  */
1265   for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
1266     if (trad_frame_addr_p (cache->saved_regs, i))
1267       cache->saved_regs[i].addr += cache->base;
1268
1269   /* The call instruction moves the caller's PC in the callee's LP.
1270      Since this is an unwind, do the reverse.  Copy the location of LP
1271      into PC (the address / regnum) so that a request for PC will be
1272      converted into a request for the LP.  */
1273
1274   cache->saved_regs[E_PC_REGNUM] = cache->saved_regs[E_LP_REGNUM];
1275
1276   return cache;
1277 }
1278
1279
1280 static struct value *
1281 v850_frame_prev_register (struct frame_info *this_frame,
1282                           void **this_cache, int regnum)
1283 {
1284   struct v850_frame_cache *cache = v850_frame_cache (this_frame, this_cache);
1285
1286   gdb_assert (regnum >= 0);
1287
1288   return trad_frame_get_prev_register (this_frame, cache->saved_regs, regnum);
1289 }
1290
1291 static void
1292 v850_frame_this_id (struct frame_info *this_frame, void **this_cache,
1293                     struct frame_id *this_id)
1294 {
1295   struct v850_frame_cache *cache = v850_frame_cache (this_frame, this_cache);
1296
1297   /* This marks the outermost frame.  */
1298   if (cache->base == 0)
1299     return;
1300
1301   *this_id = frame_id_build (cache->saved_regs[E_SP_REGNUM].addr, cache->pc);
1302 }
1303
1304 static const struct frame_unwind v850_frame_unwind = {
1305   NORMAL_FRAME,
1306   default_frame_unwind_stop_reason,
1307   v850_frame_this_id,
1308   v850_frame_prev_register,
1309   NULL,
1310   default_frame_sniffer
1311 };
1312
1313 static CORE_ADDR
1314 v850_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
1315 {
1316   return frame_unwind_register_unsigned (next_frame,
1317                                          gdbarch_sp_regnum (gdbarch));
1318 }
1319
1320 static CORE_ADDR
1321 v850_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
1322 {
1323   return frame_unwind_register_unsigned (next_frame,
1324                                          gdbarch_pc_regnum (gdbarch));
1325 }
1326
1327 static struct frame_id
1328 v850_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
1329 {
1330   CORE_ADDR sp = get_frame_register_unsigned (this_frame,
1331                                               gdbarch_sp_regnum (gdbarch));
1332   return frame_id_build (sp, get_frame_pc (this_frame));
1333 }
1334
1335 static CORE_ADDR
1336 v850_frame_base_address (struct frame_info *this_frame, void **this_cache)
1337 {
1338   struct v850_frame_cache *cache = v850_frame_cache (this_frame, this_cache);
1339
1340   return cache->base;
1341 }
1342
1343 static const struct frame_base v850_frame_base = {
1344   &v850_frame_unwind,
1345   v850_frame_base_address,
1346   v850_frame_base_address,
1347   v850_frame_base_address
1348 };
1349
1350 static struct gdbarch *
1351 v850_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
1352 {
1353   struct gdbarch *gdbarch;
1354   struct gdbarch_tdep *tdep;
1355   int e_flags, e_machine;
1356
1357   /* Extract the elf_flags if available.  */
1358   if (info.abfd != NULL
1359       && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
1360     {
1361       e_flags = elf_elfheader (info.abfd)->e_flags;
1362       e_machine = elf_elfheader (info.abfd)->e_machine;
1363     }
1364   else
1365     {
1366       e_flags = 0;
1367       e_machine = 0;
1368     }
1369
1370
1371   /* Try to find the architecture in the list of already defined
1372      architectures.  */
1373   for (arches = gdbarch_list_lookup_by_info (arches, &info);
1374        arches != NULL;
1375        arches = gdbarch_list_lookup_by_info (arches->next, &info))
1376     {
1377       if (gdbarch_tdep (arches->gdbarch)->e_flags != e_flags
1378           || gdbarch_tdep (arches->gdbarch)->e_machine != e_machine)
1379         continue;
1380
1381       return arches->gdbarch;
1382     }
1383   tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
1384   tdep->e_flags = e_flags;
1385   tdep->e_machine = e_machine;
1386
1387   switch (tdep->e_machine)
1388     {
1389     case EM_V800:
1390       tdep->abi = V850_ABI_RH850;
1391       break;
1392     default:
1393       tdep->abi = V850_ABI_GCC;
1394       break;
1395     }
1396
1397   tdep->eight_byte_align = (tdep->e_flags & EF_RH850_DATA_ALIGN8) ? 1 : 0;
1398   gdbarch = gdbarch_alloc (&info, tdep);
1399
1400   switch (info.bfd_arch_info->mach)
1401     {
1402     case bfd_mach_v850:
1403       set_gdbarch_register_name (gdbarch, v850_register_name);
1404       set_gdbarch_num_regs (gdbarch, E_NUM_OF_V850_REGS);
1405       break;
1406     case bfd_mach_v850e:
1407     case bfd_mach_v850e1:
1408       set_gdbarch_register_name (gdbarch, v850e_register_name);
1409       set_gdbarch_num_regs (gdbarch, E_NUM_OF_V850E_REGS);
1410       break;
1411     case bfd_mach_v850e2:
1412     case bfd_mach_v850e2v3:
1413       set_gdbarch_register_name (gdbarch, v850e2_register_name);
1414       set_gdbarch_num_regs (gdbarch, E_NUM_REGS);
1415       break;
1416     case bfd_mach_v850e3v5:
1417       set_gdbarch_register_name (gdbarch, v850e3v5_register_name);
1418       set_gdbarch_num_regs (gdbarch, E_NUM_OF_V850E3V5_REGS);
1419       break;
1420     }
1421
1422   set_gdbarch_num_pseudo_regs (gdbarch, 0);
1423   set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
1424   set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
1425   set_gdbarch_fp0_regnum (gdbarch, -1);
1426
1427   set_gdbarch_register_type (gdbarch, v850_register_type);
1428
1429   set_gdbarch_char_signed (gdbarch, 1);
1430   set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
1431   set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1432   set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1433   set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
1434
1435   set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1436   set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
1437   set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
1438
1439   set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1440   set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1441
1442   set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
1443   switch (info.bfd_arch_info->mach)
1444     {
1445     case bfd_mach_v850e2:
1446     case bfd_mach_v850e2v3:
1447     case bfd_mach_v850e3v5:
1448       set_gdbarch_breakpoint_from_pc (gdbarch, v850_dbtrap_breakpoint_from_pc);
1449       break;
1450     default:
1451       set_gdbarch_breakpoint_from_pc (gdbarch, v850_breakpoint_from_pc);
1452       break;
1453     }
1454
1455   set_gdbarch_return_value (gdbarch, v850_return_value);
1456   set_gdbarch_push_dummy_call (gdbarch, v850_push_dummy_call);
1457   set_gdbarch_skip_prologue (gdbarch, v850_skip_prologue);
1458
1459   set_gdbarch_print_insn (gdbarch, print_insn_v850);
1460
1461   set_gdbarch_frame_align (gdbarch, v850_frame_align);
1462   set_gdbarch_unwind_sp (gdbarch, v850_unwind_sp);
1463   set_gdbarch_unwind_pc (gdbarch, v850_unwind_pc);
1464   set_gdbarch_dummy_id (gdbarch, v850_dummy_id);
1465   frame_base_set_default (gdbarch, &v850_frame_base);
1466
1467   /* Hook in ABI-specific overrides, if they have been registered.  */
1468   gdbarch_init_osabi (info, gdbarch);
1469
1470   dwarf2_append_unwinders (gdbarch);
1471   frame_unwind_append_unwinder (gdbarch, &v850_frame_unwind);
1472
1473   return gdbarch;
1474 }
1475
1476 extern initialize_file_ftype _initialize_v850_tdep; /* -Wmissing-prototypes */
1477
1478 void
1479 _initialize_v850_tdep (void)
1480 {
1481   register_gdbarch_init (bfd_arch_v850, v850_gdbarch_init);
1482   register_gdbarch_init (bfd_arch_v850_rh850, v850_gdbarch_init);
1483 }