1 /* SPDX-License-Identifier: GPL-2.0-or-later */
4 #include <acpi/acpigen.h>
5 #include <baseboard/variants.h>
7 #include <console/console.h>
9 #include <device/device.h>
10 #include <drivers/tpm/cr50.h>
12 #include <security/tpm/tss.h>
13 #include <soc/soc_chip.h>
18 static void mainboard_update_soc_chip_config(void)
20 struct soc_intel_jasperlake_config
*cfg
= config_of_soc();
24 if (rc
!= TPM_SUCCESS
) {
25 printk(BIOS_ERR
, "tlcl_lib_init() failed: %#x\n", rc
);
29 if (!cr50_is_long_interrupt_pulse_enabled()) {
30 /* Disable GPIO PM to allow for shorter IRQ pulses */
31 printk(BIOS_INFO
, "Override GPIO PM\n");
32 cfg
->gpio_override_pm
= 1;
33 memset(cfg
->gpio_pm
, 0, sizeof(cfg
->gpio_pm
));
37 static bool any_hpd_ready(const gpio_t
*gpios
, size_t num_gpios
)
39 for (size_t i
= 0; i
< num_gpios
; i
++) {
40 if (gpio_get(gpios
[i
]))
47 static void mainboard_wait_for_hpd(void)
49 static const long display_timeout_ms
= 3000;
52 const gpio_t
*hpd_gpios
= variant_hpd_gpios(&num_gpios
);
55 printk(BIOS_WARNING
, "No HPD GPIOs, skip waiting\n");
59 printk(BIOS_INFO
, "Waiting for HPD\n");
61 /* Pins will be configured back by gpio_configure_pads. */
62 for (size_t i
= 0; i
< num_gpios
; i
++) {
63 gpio_input(hpd_gpios
[i
]);
66 stopwatch_init_msecs_expire(&sw
, display_timeout_ms
);
67 while (!any_hpd_ready(hpd_gpios
, num_gpios
)) {
68 if (stopwatch_expired(&sw
)) {
70 "HPD not ready after %ld ms. Abort.\n",
76 printk(BIOS_INFO
, "HPD ready after %lld ms\n",
77 stopwatch_duration_msecs(&sw
));
80 static void mainboard_init(void *chip_info
)
82 const struct pad_config
*base_pads
;
83 const struct pad_config
*override_pads
;
84 size_t base_num
, override_num
;
87 * For chromeboxes, wait for DP HPD to be asserted before
88 * entering FSP-S, otherwise display init may fail.
90 if (!CONFIG(SYSTEM_TYPE_LAPTOP
) && display_init_required())
91 mainboard_wait_for_hpd();
93 base_pads
= baseboard_gpio_table(&base_num
);
94 override_pads
= variant_override_gpio_table(&override_num
);
96 gpio_configure_pads_with_override(base_pads
, base_num
,
97 override_pads
, override_num
);
99 variant_devtree_update();
101 if (CONFIG(BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
))
102 mainboard_update_soc_chip_config();
105 void __weak
variant_devtree_update(void)
107 /* Override dev tree settings per board */
110 static void mainboard_dev_init(struct device
*dev
)
115 static unsigned long mainboard_write_acpi_tables(
116 const struct device
*device
, unsigned long current
, acpi_rsdp_t
*rsdp
)
121 static void mainboard_generate_s0ix_hook(void)
123 acpigen_write_if_lequal_op_int(ARG0_OP
, 1);
124 variant_generate_s0ix_hook(S0IX_ENTRY
);
125 acpigen_write_else();
126 variant_generate_s0ix_hook(S0IX_EXIT
);
127 acpigen_write_if_end();
130 static void mainboard_fill_ssdt(const struct device
*dev
)
132 acpigen_write_scope("\\_SB");
133 acpigen_write_method_serialized("MS0X", 1);
134 mainboard_generate_s0ix_hook();
135 acpigen_write_method_end(); /* Method */
136 acpigen_write_scope_end(); /* Scope */
139 void __weak
variant_generate_s0ix_hook(enum s0ix_entry entry
)
141 /* Add board-specific MS0X entries */
143 if (s0ix_entry == S0IX_ENTRY) {
144 implement variant operations here
146 if (s0ix_entry == S0IX_EXIT) {
147 implement variant operations here
153 static void mainboard_enable(struct device
*dev
)
155 dev
->ops
->init
= mainboard_dev_init
;
156 dev
->ops
->write_acpi_tables
= mainboard_write_acpi_tables
;
157 dev
->ops
->acpi_fill_ssdt
= mainboard_fill_ssdt
;
160 struct chip_operations mainboard_ops
= {
161 .init
= mainboard_init
,
162 .enable_dev
= mainboard_enable
,