2 * Derived from "arch/i386/kernel/process.c"
3 * Copyright (C) 1995 Linus Torvalds
5 * Updated and modified by Cort Dougan (cort@cs.nmt.edu) and
6 * Paul Mackerras (paulus@cs.anu.edu.au)
9 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * as published by the Free Software Foundation; either version
14 * 2 of the License, or (at your option) any later version.
17 #include <linux/errno.h>
18 #include <linux/sched.h>
19 #include <linux/kernel.h>
21 #include <linux/smp.h>
22 #include <linux/stddef.h>
23 #include <linux/unistd.h>
24 #include <linux/ptrace.h>
25 #include <linux/slab.h>
26 #include <linux/user.h>
27 #include <linux/elf.h>
28 #include <linux/prctl.h>
29 #include <linux/init_task.h>
30 #include <linux/export.h>
31 #include <linux/kallsyms.h>
32 #include <linux/mqueue.h>
33 #include <linux/hardirq.h>
34 #include <linux/utsname.h>
35 #include <linux/ftrace.h>
36 #include <linux/kernel_stat.h>
37 #include <linux/personality.h>
38 #include <linux/random.h>
39 #include <linux/hw_breakpoint.h>
40 #include <linux/uaccess.h>
42 #include <asm/pgtable.h>
44 #include <asm/processor.h>
47 #include <asm/machdep.h>
49 #include <asm/runlatch.h>
50 #include <asm/syscalls.h>
51 #include <asm/switch_to.h>
53 #include <asm/debug.h>
55 #include <asm/firmware.h>
57 #include <asm/code-patching.h>
58 #include <linux/kprobes.h>
59 #include <linux/kdebug.h>
61 /* Transactional Memory debug */
63 #define TM_DEBUG(x...) printk(KERN_INFO x)
65 #define TM_DEBUG(x...) do { } while(0)
68 extern unsigned long _get_SP(void);
71 struct task_struct
*last_task_used_math
= NULL
;
72 struct task_struct
*last_task_used_altivec
= NULL
;
73 struct task_struct
*last_task_used_vsx
= NULL
;
74 struct task_struct
*last_task_used_spe
= NULL
;
77 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
78 void giveup_fpu_maybe_transactional(struct task_struct
*tsk
)
81 * If we are saving the current thread's registers, and the
82 * thread is in a transactional state, set the TIF_RESTORE_TM
83 * bit so that we know to restore the registers before
84 * returning to userspace.
86 if (tsk
== current
&& tsk
->thread
.regs
&&
87 MSR_TM_ACTIVE(tsk
->thread
.regs
->msr
) &&
88 !test_thread_flag(TIF_RESTORE_TM
)) {
89 tsk
->thread
.ckpt_regs
.msr
= tsk
->thread
.regs
->msr
;
90 set_thread_flag(TIF_RESTORE_TM
);
96 void giveup_altivec_maybe_transactional(struct task_struct
*tsk
)
99 * If we are saving the current thread's registers, and the
100 * thread is in a transactional state, set the TIF_RESTORE_TM
101 * bit so that we know to restore the registers before
102 * returning to userspace.
104 if (tsk
== current
&& tsk
->thread
.regs
&&
105 MSR_TM_ACTIVE(tsk
->thread
.regs
->msr
) &&
106 !test_thread_flag(TIF_RESTORE_TM
)) {
107 tsk
->thread
.ckpt_regs
.msr
= tsk
->thread
.regs
->msr
;
108 set_thread_flag(TIF_RESTORE_TM
);
115 #define giveup_fpu_maybe_transactional(tsk) giveup_fpu(tsk)
116 #define giveup_altivec_maybe_transactional(tsk) giveup_altivec(tsk)
117 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
119 #ifdef CONFIG_PPC_FPU
121 * Make sure the floating-point register state in the
122 * the thread_struct is up to date for task tsk.
124 void flush_fp_to_thread(struct task_struct
*tsk
)
126 if (tsk
->thread
.regs
) {
128 * We need to disable preemption here because if we didn't,
129 * another process could get scheduled after the regs->msr
130 * test but before we have finished saving the FP registers
131 * to the thread_struct. That process could take over the
132 * FPU, and then when we get scheduled again we would store
133 * bogus values for the remaining FP registers.
136 if (tsk
->thread
.regs
->msr
& MSR_FP
) {
139 * This should only ever be called for current or
140 * for a stopped child process. Since we save away
141 * the FP register state on context switch on SMP,
142 * there is something wrong if a stopped child appears
143 * to still have its FP state in the CPU registers.
145 BUG_ON(tsk
!= current
);
147 giveup_fpu_maybe_transactional(tsk
);
152 EXPORT_SYMBOL_GPL(flush_fp_to_thread
);
153 #endif /* CONFIG_PPC_FPU */
155 void enable_kernel_fp(void)
157 WARN_ON(preemptible());
160 if (current
->thread
.regs
&& (current
->thread
.regs
->msr
& MSR_FP
))
161 giveup_fpu_maybe_transactional(current
);
163 giveup_fpu(NULL
); /* just enables FP for kernel */
165 giveup_fpu_maybe_transactional(last_task_used_math
);
166 #endif /* CONFIG_SMP */
168 EXPORT_SYMBOL(enable_kernel_fp
);
170 #ifdef CONFIG_ALTIVEC
171 void enable_kernel_altivec(void)
173 WARN_ON(preemptible());
176 if (current
->thread
.regs
&& (current
->thread
.regs
->msr
& MSR_VEC
))
177 giveup_altivec_maybe_transactional(current
);
179 giveup_altivec_notask();
181 giveup_altivec_maybe_transactional(last_task_used_altivec
);
182 #endif /* CONFIG_SMP */
184 EXPORT_SYMBOL(enable_kernel_altivec
);
187 * Make sure the VMX/Altivec register state in the
188 * the thread_struct is up to date for task tsk.
190 void flush_altivec_to_thread(struct task_struct
*tsk
)
192 if (tsk
->thread
.regs
) {
194 if (tsk
->thread
.regs
->msr
& MSR_VEC
) {
196 BUG_ON(tsk
!= current
);
198 giveup_altivec_maybe_transactional(tsk
);
203 EXPORT_SYMBOL_GPL(flush_altivec_to_thread
);
204 #endif /* CONFIG_ALTIVEC */
207 void enable_kernel_vsx(void)
209 WARN_ON(preemptible());
212 if (current
->thread
.regs
&& (current
->thread
.regs
->msr
& MSR_VSX
))
215 giveup_vsx(NULL
); /* just enable vsx for kernel - force */
217 giveup_vsx(last_task_used_vsx
);
218 #endif /* CONFIG_SMP */
220 EXPORT_SYMBOL(enable_kernel_vsx
);
222 void giveup_vsx(struct task_struct
*tsk
)
224 giveup_fpu_maybe_transactional(tsk
);
225 giveup_altivec_maybe_transactional(tsk
);
228 EXPORT_SYMBOL(giveup_vsx
);
230 void flush_vsx_to_thread(struct task_struct
*tsk
)
232 if (tsk
->thread
.regs
) {
234 if (tsk
->thread
.regs
->msr
& MSR_VSX
) {
236 BUG_ON(tsk
!= current
);
243 EXPORT_SYMBOL_GPL(flush_vsx_to_thread
);
244 #endif /* CONFIG_VSX */
248 void enable_kernel_spe(void)
250 WARN_ON(preemptible());
253 if (current
->thread
.regs
&& (current
->thread
.regs
->msr
& MSR_SPE
))
256 giveup_spe(NULL
); /* just enable SPE for kernel - force */
258 giveup_spe(last_task_used_spe
);
259 #endif /* __SMP __ */
261 EXPORT_SYMBOL(enable_kernel_spe
);
263 void flush_spe_to_thread(struct task_struct
*tsk
)
265 if (tsk
->thread
.regs
) {
267 if (tsk
->thread
.regs
->msr
& MSR_SPE
) {
269 BUG_ON(tsk
!= current
);
271 tsk
->thread
.spefscr
= mfspr(SPRN_SPEFSCR
);
277 #endif /* CONFIG_SPE */
281 * If we are doing lazy switching of CPU state (FP, altivec or SPE),
282 * and the current task has some state, discard it.
284 void discard_lazy_cpu_state(void)
287 if (last_task_used_math
== current
)
288 last_task_used_math
= NULL
;
289 #ifdef CONFIG_ALTIVEC
290 if (last_task_used_altivec
== current
)
291 last_task_used_altivec
= NULL
;
292 #endif /* CONFIG_ALTIVEC */
294 if (last_task_used_vsx
== current
)
295 last_task_used_vsx
= NULL
;
296 #endif /* CONFIG_VSX */
298 if (last_task_used_spe
== current
)
299 last_task_used_spe
= NULL
;
303 #endif /* CONFIG_SMP */
305 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
306 void do_send_trap(struct pt_regs
*regs
, unsigned long address
,
307 unsigned long error_code
, int signal_code
, int breakpt
)
311 current
->thread
.trap_nr
= signal_code
;
312 if (notify_die(DIE_DABR_MATCH
, "dabr_match", regs
, error_code
,
313 11, SIGSEGV
) == NOTIFY_STOP
)
316 /* Deliver the signal to userspace */
317 info
.si_signo
= SIGTRAP
;
318 info
.si_errno
= breakpt
; /* breakpoint or watchpoint id */
319 info
.si_code
= signal_code
;
320 info
.si_addr
= (void __user
*)address
;
321 force_sig_info(SIGTRAP
, &info
, current
);
323 #else /* !CONFIG_PPC_ADV_DEBUG_REGS */
324 void do_break (struct pt_regs
*regs
, unsigned long address
,
325 unsigned long error_code
)
329 current
->thread
.trap_nr
= TRAP_HWBKPT
;
330 if (notify_die(DIE_DABR_MATCH
, "dabr_match", regs
, error_code
,
331 11, SIGSEGV
) == NOTIFY_STOP
)
334 if (debugger_break_match(regs
))
337 /* Clear the breakpoint */
338 hw_breakpoint_disable();
340 /* Deliver the signal to userspace */
341 info
.si_signo
= SIGTRAP
;
343 info
.si_code
= TRAP_HWBKPT
;
344 info
.si_addr
= (void __user
*)address
;
345 force_sig_info(SIGTRAP
, &info
, current
);
347 #endif /* CONFIG_PPC_ADV_DEBUG_REGS */
349 static DEFINE_PER_CPU(struct arch_hw_breakpoint
, current_brk
);
351 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
353 * Set the debug registers back to their default "safe" values.
355 static void set_debug_reg_defaults(struct thread_struct
*thread
)
357 thread
->debug
.iac1
= thread
->debug
.iac2
= 0;
358 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
359 thread
->debug
.iac3
= thread
->debug
.iac4
= 0;
361 thread
->debug
.dac1
= thread
->debug
.dac2
= 0;
362 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
363 thread
->debug
.dvc1
= thread
->debug
.dvc2
= 0;
365 thread
->debug
.dbcr0
= 0;
368 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
370 thread
->debug
.dbcr1
= DBCR1_IAC1US
| DBCR1_IAC2US
|
371 DBCR1_IAC3US
| DBCR1_IAC4US
;
373 * Force Data Address Compare User/Supervisor bits to be User-only
374 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0.
376 thread
->debug
.dbcr2
= DBCR2_DAC1US
| DBCR2_DAC2US
;
378 thread
->debug
.dbcr1
= 0;
382 static void prime_debug_regs(struct debug_reg
*debug
)
385 * We could have inherited MSR_DE from userspace, since
386 * it doesn't get cleared on exception entry. Make sure
387 * MSR_DE is clear before we enable any debug events.
389 mtmsr(mfmsr() & ~MSR_DE
);
391 mtspr(SPRN_IAC1
, debug
->iac1
);
392 mtspr(SPRN_IAC2
, debug
->iac2
);
393 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
394 mtspr(SPRN_IAC3
, debug
->iac3
);
395 mtspr(SPRN_IAC4
, debug
->iac4
);
397 mtspr(SPRN_DAC1
, debug
->dac1
);
398 mtspr(SPRN_DAC2
, debug
->dac2
);
399 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
400 mtspr(SPRN_DVC1
, debug
->dvc1
);
401 mtspr(SPRN_DVC2
, debug
->dvc2
);
403 mtspr(SPRN_DBCR0
, debug
->dbcr0
);
404 mtspr(SPRN_DBCR1
, debug
->dbcr1
);
406 mtspr(SPRN_DBCR2
, debug
->dbcr2
);
410 * Unless neither the old or new thread are making use of the
411 * debug registers, set the debug registers from the values
412 * stored in the new thread.
414 void switch_booke_debug_regs(struct debug_reg
*new_debug
)
416 if ((current
->thread
.debug
.dbcr0
& DBCR0_IDM
)
417 || (new_debug
->dbcr0
& DBCR0_IDM
))
418 prime_debug_regs(new_debug
);
420 EXPORT_SYMBOL_GPL(switch_booke_debug_regs
);
421 #else /* !CONFIG_PPC_ADV_DEBUG_REGS */
422 #ifndef CONFIG_HAVE_HW_BREAKPOINT
423 static void set_debug_reg_defaults(struct thread_struct
*thread
)
425 thread
->hw_brk
.address
= 0;
426 thread
->hw_brk
.type
= 0;
427 set_breakpoint(&thread
->hw_brk
);
429 #endif /* !CONFIG_HAVE_HW_BREAKPOINT */
430 #endif /* CONFIG_PPC_ADV_DEBUG_REGS */
432 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
433 static inline int __set_dabr(unsigned long dabr
, unsigned long dabrx
)
435 mtspr(SPRN_DAC1
, dabr
);
436 #ifdef CONFIG_PPC_47x
441 #elif defined(CONFIG_PPC_BOOK3S)
442 static inline int __set_dabr(unsigned long dabr
, unsigned long dabrx
)
444 mtspr(SPRN_DABR
, dabr
);
445 if (cpu_has_feature(CPU_FTR_DABRX
))
446 mtspr(SPRN_DABRX
, dabrx
);
450 static inline int __set_dabr(unsigned long dabr
, unsigned long dabrx
)
456 static inline int set_dabr(struct arch_hw_breakpoint
*brk
)
458 unsigned long dabr
, dabrx
;
460 dabr
= brk
->address
| (brk
->type
& HW_BRK_TYPE_DABR
);
461 dabrx
= ((brk
->type
>> 3) & 0x7);
464 return ppc_md
.set_dabr(dabr
, dabrx
);
466 return __set_dabr(dabr
, dabrx
);
469 static inline int set_dawr(struct arch_hw_breakpoint
*brk
)
471 unsigned long dawr
, dawrx
, mrd
;
475 dawrx
= (brk
->type
& (HW_BRK_TYPE_READ
| HW_BRK_TYPE_WRITE
)) \
476 << (63 - 58); //* read/write bits */
477 dawrx
|= ((brk
->type
& (HW_BRK_TYPE_TRANSLATE
)) >> 2) \
478 << (63 - 59); //* translate */
479 dawrx
|= (brk
->type
& (HW_BRK_TYPE_PRIV_ALL
)) \
480 >> 3; //* PRIM bits */
481 /* dawr length is stored in field MDR bits 48:53. Matches range in
482 doublewords (64 bits) baised by -1 eg. 0b000000=1DW and
484 brk->len is in bytes.
485 This aligns up to double word size, shifts and does the bias.
487 mrd
= ((brk
->len
+ 7) >> 3) - 1;
488 dawrx
|= (mrd
& 0x3f) << (63 - 53);
491 return ppc_md
.set_dawr(dawr
, dawrx
);
492 mtspr(SPRN_DAWR
, dawr
);
493 mtspr(SPRN_DAWRX
, dawrx
);
497 void __set_breakpoint(struct arch_hw_breakpoint
*brk
)
499 memcpy(this_cpu_ptr(¤t_brk
), brk
, sizeof(*brk
));
501 if (cpu_has_feature(CPU_FTR_DAWR
))
507 void set_breakpoint(struct arch_hw_breakpoint
*brk
)
510 __set_breakpoint(brk
);
515 DEFINE_PER_CPU(struct cpu_usage
, cpu_usage_array
);
518 static inline bool hw_brk_match(struct arch_hw_breakpoint
*a
,
519 struct arch_hw_breakpoint
*b
)
521 if (a
->address
!= b
->address
)
523 if (a
->type
!= b
->type
)
525 if (a
->len
!= b
->len
)
530 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
531 static void tm_reclaim_thread(struct thread_struct
*thr
,
532 struct thread_info
*ti
, uint8_t cause
)
534 unsigned long msr_diff
= 0;
537 * If FP/VSX registers have been already saved to the
538 * thread_struct, move them to the transact_fp array.
539 * We clear the TIF_RESTORE_TM bit since after the reclaim
540 * the thread will no longer be transactional.
542 if (test_ti_thread_flag(ti
, TIF_RESTORE_TM
)) {
543 msr_diff
= thr
->ckpt_regs
.msr
& ~thr
->regs
->msr
;
544 if (msr_diff
& MSR_FP
)
545 memcpy(&thr
->transact_fp
, &thr
->fp_state
,
546 sizeof(struct thread_fp_state
));
547 if (msr_diff
& MSR_VEC
)
548 memcpy(&thr
->transact_vr
, &thr
->vr_state
,
549 sizeof(struct thread_vr_state
));
550 clear_ti_thread_flag(ti
, TIF_RESTORE_TM
);
551 msr_diff
&= MSR_FP
| MSR_VEC
| MSR_VSX
| MSR_FE0
| MSR_FE1
;
554 tm_reclaim(thr
, thr
->regs
->msr
, cause
);
556 /* Having done the reclaim, we now have the checkpointed
557 * FP/VSX values in the registers. These might be valid
558 * even if we have previously called enable_kernel_fp() or
559 * flush_fp_to_thread(), so update thr->regs->msr to
560 * indicate their current validity.
562 thr
->regs
->msr
|= msr_diff
;
565 void tm_reclaim_current(uint8_t cause
)
568 tm_reclaim_thread(¤t
->thread
, current_thread_info(), cause
);
571 static inline void tm_reclaim_task(struct task_struct
*tsk
)
573 /* We have to work out if we're switching from/to a task that's in the
574 * middle of a transaction.
576 * In switching we need to maintain a 2nd register state as
577 * oldtask->thread.ckpt_regs. We tm_reclaim(oldproc); this saves the
578 * checkpointed (tbegin) state in ckpt_regs and saves the transactional
579 * (current) FPRs into oldtask->thread.transact_fpr[].
581 * We also context switch (save) TFHAR/TEXASR/TFIAR in here.
583 struct thread_struct
*thr
= &tsk
->thread
;
588 if (!MSR_TM_ACTIVE(thr
->regs
->msr
))
589 goto out_and_saveregs
;
591 /* Stash the original thread MSR, as giveup_fpu et al will
592 * modify it. We hold onto it to see whether the task used
593 * FP & vector regs. If the TIF_RESTORE_TM flag is set,
594 * ckpt_regs.msr is already set.
596 if (!test_ti_thread_flag(task_thread_info(tsk
), TIF_RESTORE_TM
))
597 thr
->ckpt_regs
.msr
= thr
->regs
->msr
;
599 TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, "
600 "ccr=%lx, msr=%lx, trap=%lx)\n",
601 tsk
->pid
, thr
->regs
->nip
,
602 thr
->regs
->ccr
, thr
->regs
->msr
,
605 tm_reclaim_thread(thr
, task_thread_info(tsk
), TM_CAUSE_RESCHED
);
607 TM_DEBUG("--- tm_reclaim on pid %d complete\n",
611 /* Always save the regs here, even if a transaction's not active.
612 * This context-switches a thread's TM info SPRs. We do it here to
613 * be consistent with the restore path (in recheckpoint) which
614 * cannot happen later in _switch().
619 extern void __tm_recheckpoint(struct thread_struct
*thread
,
620 unsigned long orig_msr
);
622 void tm_recheckpoint(struct thread_struct
*thread
,
623 unsigned long orig_msr
)
627 /* We really can't be interrupted here as the TEXASR registers can't
628 * change and later in the trecheckpoint code, we have a userspace R1.
629 * So let's hard disable over this region.
631 local_irq_save(flags
);
634 /* The TM SPRs are restored here, so that TEXASR.FS can be set
635 * before the trecheckpoint and no explosion occurs.
637 tm_restore_sprs(thread
);
639 __tm_recheckpoint(thread
, orig_msr
);
641 local_irq_restore(flags
);
644 static inline void tm_recheckpoint_new_task(struct task_struct
*new)
648 if (!cpu_has_feature(CPU_FTR_TM
))
651 /* Recheckpoint the registers of the thread we're about to switch to.
653 * If the task was using FP, we non-lazily reload both the original and
654 * the speculative FP register states. This is because the kernel
655 * doesn't see if/when a TM rollback occurs, so if we take an FP
656 * unavoidable later, we are unable to determine which set of FP regs
657 * need to be restored.
659 if (!new->thread
.regs
)
662 if (!MSR_TM_ACTIVE(new->thread
.regs
->msr
)){
663 tm_restore_sprs(&new->thread
);
666 msr
= new->thread
.ckpt_regs
.msr
;
667 /* Recheckpoint to restore original checkpointed register state. */
668 TM_DEBUG("*** tm_recheckpoint of pid %d "
669 "(new->msr 0x%lx, new->origmsr 0x%lx)\n",
670 new->pid
, new->thread
.regs
->msr
, msr
);
672 /* This loads the checkpointed FP/VEC state, if used */
673 tm_recheckpoint(&new->thread
, msr
);
675 /* This loads the speculative FP/VEC state, if used */
677 do_load_up_transact_fpu(&new->thread
);
678 new->thread
.regs
->msr
|=
679 (MSR_FP
| new->thread
.fpexc_mode
);
681 #ifdef CONFIG_ALTIVEC
683 do_load_up_transact_altivec(&new->thread
);
684 new->thread
.regs
->msr
|= MSR_VEC
;
687 /* We may as well turn on VSX too since all the state is restored now */
689 new->thread
.regs
->msr
|= MSR_VSX
;
691 TM_DEBUG("*** tm_recheckpoint of pid %d complete "
692 "(kernel msr 0x%lx)\n",
696 static inline void __switch_to_tm(struct task_struct
*prev
)
698 if (cpu_has_feature(CPU_FTR_TM
)) {
700 tm_reclaim_task(prev
);
705 * This is called if we are on the way out to userspace and the
706 * TIF_RESTORE_TM flag is set. It checks if we need to reload
707 * FP and/or vector state and does so if necessary.
708 * If userspace is inside a transaction (whether active or
709 * suspended) and FP/VMX/VSX instructions have ever been enabled
710 * inside that transaction, then we have to keep them enabled
711 * and keep the FP/VMX/VSX state loaded while ever the transaction
712 * continues. The reason is that if we didn't, and subsequently
713 * got a FP/VMX/VSX unavailable interrupt inside a transaction,
714 * we don't know whether it's the same transaction, and thus we
715 * don't know which of the checkpointed state and the transactional
718 void restore_tm_state(struct pt_regs
*regs
)
720 unsigned long msr_diff
;
722 clear_thread_flag(TIF_RESTORE_TM
);
723 if (!MSR_TM_ACTIVE(regs
->msr
))
726 msr_diff
= current
->thread
.ckpt_regs
.msr
& ~regs
->msr
;
727 msr_diff
&= MSR_FP
| MSR_VEC
| MSR_VSX
;
728 if (msr_diff
& MSR_FP
) {
730 load_fp_state(¤t
->thread
.fp_state
);
731 regs
->msr
|= current
->thread
.fpexc_mode
;
733 if (msr_diff
& MSR_VEC
) {
735 load_vr_state(¤t
->thread
.vr_state
);
737 regs
->msr
|= msr_diff
;
741 #define tm_recheckpoint_new_task(new)
742 #define __switch_to_tm(prev)
743 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
745 struct task_struct
*__switch_to(struct task_struct
*prev
,
746 struct task_struct
*new)
748 struct thread_struct
*new_thread
, *old_thread
;
749 struct task_struct
*last
;
750 #ifdef CONFIG_PPC_BOOK3S_64
751 struct ppc64_tlb_batch
*batch
;
754 WARN_ON(!irqs_disabled());
756 /* Back up the TAR and DSCR across context switches.
757 * Note that the TAR is not available for use in the kernel. (To
758 * provide this, the TAR should be backed up/restored on exception
759 * entry/exit instead, and be in pt_regs. FIXME, this should be in
760 * pt_regs anyway (for debug).)
761 * Save the TAR and DSCR here before we do treclaim/trecheckpoint as
762 * these will change them.
764 save_early_sprs(&prev
->thread
);
766 __switch_to_tm(prev
);
769 /* avoid complexity of lazy save/restore of fpu
770 * by just saving it every time we switch out if
771 * this task used the fpu during the last quantum.
773 * If it tries to use the fpu again, it'll trap and
774 * reload its fp regs. So we don't have to do a restore
775 * every switch, just a save.
778 if (prev
->thread
.regs
&& (prev
->thread
.regs
->msr
& MSR_FP
))
780 #ifdef CONFIG_ALTIVEC
782 * If the previous thread used altivec in the last quantum
783 * (thus changing altivec regs) then save them.
784 * We used to check the VRSAVE register but not all apps
785 * set it, so we don't rely on it now (and in fact we need
786 * to save & restore VSCR even if VRSAVE == 0). -- paulus
788 * On SMP we always save/restore altivec regs just to avoid the
789 * complexity of changing processors.
792 if (prev
->thread
.regs
&& (prev
->thread
.regs
->msr
& MSR_VEC
))
793 giveup_altivec(prev
);
794 #endif /* CONFIG_ALTIVEC */
796 if (prev
->thread
.regs
&& (prev
->thread
.regs
->msr
& MSR_VSX
))
797 /* VMX and FPU registers are already save here */
799 #endif /* CONFIG_VSX */
802 * If the previous thread used spe in the last quantum
803 * (thus changing spe regs) then save them.
805 * On SMP we always save/restore spe regs just to avoid the
806 * complexity of changing processors.
808 if ((prev
->thread
.regs
&& (prev
->thread
.regs
->msr
& MSR_SPE
)))
810 #endif /* CONFIG_SPE */
812 #else /* CONFIG_SMP */
813 #ifdef CONFIG_ALTIVEC
814 /* Avoid the trap. On smp this this never happens since
815 * we don't set last_task_used_altivec -- Cort
817 if (new->thread
.regs
&& last_task_used_altivec
== new)
818 new->thread
.regs
->msr
|= MSR_VEC
;
819 #endif /* CONFIG_ALTIVEC */
821 if (new->thread
.regs
&& last_task_used_vsx
== new)
822 new->thread
.regs
->msr
|= MSR_VSX
;
823 #endif /* CONFIG_VSX */
825 /* Avoid the trap. On smp this this never happens since
826 * we don't set last_task_used_spe
828 if (new->thread
.regs
&& last_task_used_spe
== new)
829 new->thread
.regs
->msr
|= MSR_SPE
;
830 #endif /* CONFIG_SPE */
832 #endif /* CONFIG_SMP */
834 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
835 switch_booke_debug_regs(&new->thread
.debug
);
838 * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
841 #ifndef CONFIG_HAVE_HW_BREAKPOINT
842 if (unlikely(!hw_brk_match(this_cpu_ptr(¤t_brk
), &new->thread
.hw_brk
)))
843 __set_breakpoint(&new->thread
.hw_brk
);
844 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
848 new_thread
= &new->thread
;
849 old_thread
= ¤t
->thread
;
853 * Collect processor utilization data per process
855 if (firmware_has_feature(FW_FEATURE_SPLPAR
)) {
856 struct cpu_usage
*cu
= this_cpu_ptr(&cpu_usage_array
);
857 long unsigned start_tb
, current_tb
;
858 start_tb
= old_thread
->start_tb
;
859 cu
->current_tb
= current_tb
= mfspr(SPRN_PURR
);
860 old_thread
->accum_tb
+= (current_tb
- start_tb
);
861 new_thread
->start_tb
= current_tb
;
863 #endif /* CONFIG_PPC64 */
865 #ifdef CONFIG_PPC_BOOK3S_64
866 batch
= this_cpu_ptr(&ppc64_tlb_batch
);
868 current_thread_info()->local_flags
|= _TLF_LAZY_MMU
;
870 __flush_tlb_pending(batch
);
873 #endif /* CONFIG_PPC_BOOK3S_64 */
876 * We can't take a PMU exception inside _switch() since there is a
877 * window where the kernel stack SLB and the kernel stack are out
878 * of sync. Hard disable here.
882 tm_recheckpoint_new_task(new);
884 last
= _switch(old_thread
, new_thread
);
886 #ifdef CONFIG_PPC_BOOK3S_64
887 if (current_thread_info()->local_flags
& _TLF_LAZY_MMU
) {
888 current_thread_info()->local_flags
&= ~_TLF_LAZY_MMU
;
889 batch
= this_cpu_ptr(&ppc64_tlb_batch
);
892 #endif /* CONFIG_PPC_BOOK3S_64 */
897 static int instructions_to_print
= 16;
899 static void show_instructions(struct pt_regs
*regs
)
902 unsigned long pc
= regs
->nip
- (instructions_to_print
* 3 / 4 *
905 printk("Instruction dump:");
907 for (i
= 0; i
< instructions_to_print
; i
++) {
913 #if !defined(CONFIG_BOOKE)
914 /* If executing with the IMMU off, adjust pc rather
915 * than print XXXXXXXX.
917 if (!(regs
->msr
& MSR_IR
))
918 pc
= (unsigned long)phys_to_virt(pc
);
921 if (!__kernel_text_address(pc
) ||
922 probe_kernel_address((unsigned int __user
*)pc
, instr
)) {
923 printk(KERN_CONT
"XXXXXXXX ");
926 printk(KERN_CONT
"<%08x> ", instr
);
928 printk(KERN_CONT
"%08x ", instr
);
937 static struct regbit
{
941 #if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE)
970 static void printbits(unsigned long val
, struct regbit
*bits
)
972 const char *sep
= "";
975 for (; bits
->bit
; ++bits
)
976 if (val
& bits
->bit
) {
977 printk("%s%s", sep
, bits
->name
);
985 #define REGS_PER_LINE 4
986 #define LAST_VOLATILE 13
989 #define REGS_PER_LINE 8
990 #define LAST_VOLATILE 12
993 void show_regs(struct pt_regs
* regs
)
997 show_regs_print_info(KERN_DEFAULT
);
999 printk("NIP: "REG
" LR: "REG
" CTR: "REG
"\n",
1000 regs
->nip
, regs
->link
, regs
->ctr
);
1001 printk("REGS: %p TRAP: %04lx %s (%s)\n",
1002 regs
, regs
->trap
, print_tainted(), init_utsname()->release
);
1003 printk("MSR: "REG
" ", regs
->msr
);
1004 printbits(regs
->msr
, msr_bits
);
1005 printk(" CR: %08lx XER: %08lx\n", regs
->ccr
, regs
->xer
);
1007 if ((regs
->trap
!= 0xc00) && cpu_has_feature(CPU_FTR_CFAR
))
1008 printk("CFAR: "REG
" ", regs
->orig_gpr3
);
1009 if (trap
== 0x200 || trap
== 0x300 || trap
== 0x600)
1010 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
1011 printk("DEAR: "REG
" ESR: "REG
" ", regs
->dar
, regs
->dsisr
);
1013 printk("DAR: "REG
" DSISR: %08lx ", regs
->dar
, regs
->dsisr
);
1016 printk("SOFTE: %ld ", regs
->softe
);
1018 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1019 if (MSR_TM_ACTIVE(regs
->msr
))
1020 printk("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch
);
1023 for (i
= 0; i
< 32; i
++) {
1024 if ((i
% REGS_PER_LINE
) == 0)
1025 printk("\nGPR%02d: ", i
);
1026 printk(REG
" ", regs
->gpr
[i
]);
1027 if (i
== LAST_VOLATILE
&& !FULL_REGS(regs
))
1031 #ifdef CONFIG_KALLSYMS
1033 * Lookup NIP late so we have the best change of getting the
1034 * above info out without failing
1036 printk("NIP ["REG
"] %pS\n", regs
->nip
, (void *)regs
->nip
);
1037 printk("LR ["REG
"] %pS\n", regs
->link
, (void *)regs
->link
);
1039 show_stack(current
, (unsigned long *) regs
->gpr
[1]);
1040 if (!user_mode(regs
))
1041 show_instructions(regs
);
1044 void exit_thread(void)
1046 discard_lazy_cpu_state();
1049 void flush_thread(void)
1051 discard_lazy_cpu_state();
1053 #ifdef CONFIG_HAVE_HW_BREAKPOINT
1054 flush_ptrace_hw_breakpoint(current
);
1055 #else /* CONFIG_HAVE_HW_BREAKPOINT */
1056 set_debug_reg_defaults(¤t
->thread
);
1057 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
1061 release_thread(struct task_struct
*t
)
1066 * this gets called so that we can store coprocessor state into memory and
1067 * copy the current task into the new thread.
1069 int arch_dup_task_struct(struct task_struct
*dst
, struct task_struct
*src
)
1071 flush_fp_to_thread(src
);
1072 flush_altivec_to_thread(src
);
1073 flush_vsx_to_thread(src
);
1074 flush_spe_to_thread(src
);
1076 * Flush TM state out so we can copy it. __switch_to_tm() does this
1077 * flush but it removes the checkpointed state from the current CPU and
1078 * transitions the CPU out of TM mode. Hence we need to call
1079 * tm_recheckpoint_new_task() (on the same task) to restore the
1080 * checkpointed state back and the TM mode.
1082 __switch_to_tm(src
);
1083 tm_recheckpoint_new_task(src
);
1087 clear_task_ebb(dst
);
1092 static void setup_ksp_vsid(struct task_struct
*p
, unsigned long sp
)
1094 #ifdef CONFIG_PPC_STD_MMU_64
1095 unsigned long sp_vsid
;
1096 unsigned long llp
= mmu_psize_defs
[mmu_linear_psize
].sllp
;
1098 if (mmu_has_feature(MMU_FTR_1T_SEGMENT
))
1099 sp_vsid
= get_kernel_vsid(sp
, MMU_SEGSIZE_1T
)
1100 << SLB_VSID_SHIFT_1T
;
1102 sp_vsid
= get_kernel_vsid(sp
, MMU_SEGSIZE_256M
)
1104 sp_vsid
|= SLB_VSID_KERNEL
| llp
;
1105 p
->thread
.ksp_vsid
= sp_vsid
;
1114 * Copy architecture-specific thread state
1116 int copy_thread(unsigned long clone_flags
, unsigned long usp
,
1117 unsigned long kthread_arg
, struct task_struct
*p
)
1119 struct pt_regs
*childregs
, *kregs
;
1120 extern void ret_from_fork(void);
1121 extern void ret_from_kernel_thread(void);
1123 unsigned long sp
= (unsigned long)task_stack_page(p
) + THREAD_SIZE
;
1125 /* Copy registers */
1126 sp
-= sizeof(struct pt_regs
);
1127 childregs
= (struct pt_regs
*) sp
;
1128 if (unlikely(p
->flags
& PF_KTHREAD
)) {
1130 struct thread_info
*ti
= (void *)task_stack_page(p
);
1131 memset(childregs
, 0, sizeof(struct pt_regs
));
1132 childregs
->gpr
[1] = sp
+ sizeof(struct pt_regs
);
1135 childregs
->gpr
[14] = ppc_function_entry((void *)usp
);
1137 clear_tsk_thread_flag(p
, TIF_32BIT
);
1138 childregs
->softe
= 1;
1140 childregs
->gpr
[15] = kthread_arg
;
1141 p
->thread
.regs
= NULL
; /* no user register state */
1142 ti
->flags
|= _TIF_RESTOREALL
;
1143 f
= ret_from_kernel_thread
;
1146 struct pt_regs
*regs
= current_pt_regs();
1147 CHECK_FULL_REGS(regs
);
1150 childregs
->gpr
[1] = usp
;
1151 p
->thread
.regs
= childregs
;
1152 childregs
->gpr
[3] = 0; /* Result from fork() */
1153 if (clone_flags
& CLONE_SETTLS
) {
1155 if (!is_32bit_task())
1156 childregs
->gpr
[13] = childregs
->gpr
[6];
1159 childregs
->gpr
[2] = childregs
->gpr
[6];
1164 sp
-= STACK_FRAME_OVERHEAD
;
1167 * The way this works is that at some point in the future
1168 * some task will call _switch to switch to the new task.
1169 * That will pop off the stack frame created below and start
1170 * the new task running at ret_from_fork. The new task will
1171 * do some house keeping and then return from the fork or clone
1172 * system call, using the stack frame created above.
1174 ((unsigned long *)sp
)[0] = 0;
1175 sp
-= sizeof(struct pt_regs
);
1176 kregs
= (struct pt_regs
*) sp
;
1177 sp
-= STACK_FRAME_OVERHEAD
;
1180 p
->thread
.ksp_limit
= (unsigned long)task_stack_page(p
) +
1181 _ALIGN_UP(sizeof(struct thread_info
), 16);
1183 #ifdef CONFIG_HAVE_HW_BREAKPOINT
1184 p
->thread
.ptrace_bps
[0] = NULL
;
1187 p
->thread
.fp_save_area
= NULL
;
1188 #ifdef CONFIG_ALTIVEC
1189 p
->thread
.vr_save_area
= NULL
;
1192 setup_ksp_vsid(p
, sp
);
1195 if (cpu_has_feature(CPU_FTR_DSCR
)) {
1196 p
->thread
.dscr_inherit
= current
->thread
.dscr_inherit
;
1197 p
->thread
.dscr
= current
->thread
.dscr
;
1199 if (cpu_has_feature(CPU_FTR_HAS_PPR
))
1200 p
->thread
.ppr
= INIT_PPR
;
1202 kregs
->nip
= ppc_function_entry(f
);
1207 * Set up a thread for executing a new program
1209 void start_thread(struct pt_regs
*regs
, unsigned long start
, unsigned long sp
)
1212 unsigned long load_addr
= regs
->gpr
[2]; /* saved by ELF_PLAT_INIT */
1216 * If we exec out of a kernel thread then thread.regs will not be
1219 if (!current
->thread
.regs
) {
1220 struct pt_regs
*regs
= task_stack_page(current
) + THREAD_SIZE
;
1221 current
->thread
.regs
= regs
- 1;
1224 memset(regs
->gpr
, 0, sizeof(regs
->gpr
));
1232 * We have just cleared all the nonvolatile GPRs, so make
1233 * FULL_REGS(regs) return true. This is necessary to allow
1234 * ptrace to examine the thread immediately after exec.
1241 regs
->msr
= MSR_USER
;
1243 if (!is_32bit_task()) {
1244 unsigned long entry
;
1246 if (is_elf2_task()) {
1247 /* Look ma, no function descriptors! */
1252 * The latest iteration of the ABI requires that when
1253 * calling a function (at its global entry point),
1254 * the caller must ensure r12 holds the entry point
1255 * address (so that the function can quickly
1256 * establish addressability).
1258 regs
->gpr
[12] = start
;
1259 /* Make sure that's restored on entry to userspace. */
1260 set_thread_flag(TIF_RESTOREALL
);
1264 /* start is a relocated pointer to the function
1265 * descriptor for the elf _start routine. The first
1266 * entry in the function descriptor is the entry
1267 * address of _start and the second entry is the TOC
1268 * value we need to use.
1270 __get_user(entry
, (unsigned long __user
*)start
);
1271 __get_user(toc
, (unsigned long __user
*)start
+1);
1273 /* Check whether the e_entry function descriptor entries
1274 * need to be relocated before we can use them.
1276 if (load_addr
!= 0) {
1283 regs
->msr
= MSR_USER64
;
1287 regs
->msr
= MSR_USER32
;
1290 discard_lazy_cpu_state();
1292 current
->thread
.used_vsr
= 0;
1294 memset(¤t
->thread
.fp_state
, 0, sizeof(current
->thread
.fp_state
));
1295 current
->thread
.fp_save_area
= NULL
;
1296 #ifdef CONFIG_ALTIVEC
1297 memset(¤t
->thread
.vr_state
, 0, sizeof(current
->thread
.vr_state
));
1298 current
->thread
.vr_state
.vscr
.u
[3] = 0x00010000; /* Java mode disabled */
1299 current
->thread
.vr_save_area
= NULL
;
1300 current
->thread
.vrsave
= 0;
1301 current
->thread
.used_vr
= 0;
1302 #endif /* CONFIG_ALTIVEC */
1304 memset(current
->thread
.evr
, 0, sizeof(current
->thread
.evr
));
1305 current
->thread
.acc
= 0;
1306 current
->thread
.spefscr
= 0;
1307 current
->thread
.used_spe
= 0;
1308 #endif /* CONFIG_SPE */
1309 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1310 if (cpu_has_feature(CPU_FTR_TM
))
1311 regs
->msr
|= MSR_TM
;
1312 current
->thread
.tm_tfhar
= 0;
1313 current
->thread
.tm_texasr
= 0;
1314 current
->thread
.tm_tfiar
= 0;
1315 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
1317 EXPORT_SYMBOL(start_thread
);
1319 #define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \
1320 | PR_FP_EXC_RES | PR_FP_EXC_INV)
1322 int set_fpexc_mode(struct task_struct
*tsk
, unsigned int val
)
1324 struct pt_regs
*regs
= tsk
->thread
.regs
;
1326 /* This is a bit hairy. If we are an SPE enabled processor
1327 * (have embedded fp) we store the IEEE exception enable flags in
1328 * fpexc_mode. fpexc_mode is also used for setting FP exception
1329 * mode (asyn, precise, disabled) for 'Classic' FP. */
1330 if (val
& PR_FP_EXC_SW_ENABLE
) {
1332 if (cpu_has_feature(CPU_FTR_SPE
)) {
1334 * When the sticky exception bits are set
1335 * directly by userspace, it must call prctl
1336 * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
1337 * in the existing prctl settings) or
1338 * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
1339 * the bits being set). <fenv.h> functions
1340 * saving and restoring the whole
1341 * floating-point environment need to do so
1342 * anyway to restore the prctl settings from
1343 * the saved environment.
1345 tsk
->thread
.spefscr_last
= mfspr(SPRN_SPEFSCR
);
1346 tsk
->thread
.fpexc_mode
= val
&
1347 (PR_FP_EXC_SW_ENABLE
| PR_FP_ALL_EXCEPT
);
1357 /* on a CONFIG_SPE this does not hurt us. The bits that
1358 * __pack_fe01 use do not overlap with bits used for
1359 * PR_FP_EXC_SW_ENABLE. Additionally, the MSR[FE0,FE1] bits
1360 * on CONFIG_SPE implementations are reserved so writing to
1361 * them does not change anything */
1362 if (val
> PR_FP_EXC_PRECISE
)
1364 tsk
->thread
.fpexc_mode
= __pack_fe01(val
);
1365 if (regs
!= NULL
&& (regs
->msr
& MSR_FP
) != 0)
1366 regs
->msr
= (regs
->msr
& ~(MSR_FE0
|MSR_FE1
))
1367 | tsk
->thread
.fpexc_mode
;
1371 int get_fpexc_mode(struct task_struct
*tsk
, unsigned long adr
)
1375 if (tsk
->thread
.fpexc_mode
& PR_FP_EXC_SW_ENABLE
)
1377 if (cpu_has_feature(CPU_FTR_SPE
)) {
1379 * When the sticky exception bits are set
1380 * directly by userspace, it must call prctl
1381 * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
1382 * in the existing prctl settings) or
1383 * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
1384 * the bits being set). <fenv.h> functions
1385 * saving and restoring the whole
1386 * floating-point environment need to do so
1387 * anyway to restore the prctl settings from
1388 * the saved environment.
1390 tsk
->thread
.spefscr_last
= mfspr(SPRN_SPEFSCR
);
1391 val
= tsk
->thread
.fpexc_mode
;
1398 val
= __unpack_fe01(tsk
->thread
.fpexc_mode
);
1399 return put_user(val
, (unsigned int __user
*) adr
);
1402 int set_endian(struct task_struct
*tsk
, unsigned int val
)
1404 struct pt_regs
*regs
= tsk
->thread
.regs
;
1406 if ((val
== PR_ENDIAN_LITTLE
&& !cpu_has_feature(CPU_FTR_REAL_LE
)) ||
1407 (val
== PR_ENDIAN_PPC_LITTLE
&& !cpu_has_feature(CPU_FTR_PPC_LE
)))
1413 if (val
== PR_ENDIAN_BIG
)
1414 regs
->msr
&= ~MSR_LE
;
1415 else if (val
== PR_ENDIAN_LITTLE
|| val
== PR_ENDIAN_PPC_LITTLE
)
1416 regs
->msr
|= MSR_LE
;
1423 int get_endian(struct task_struct
*tsk
, unsigned long adr
)
1425 struct pt_regs
*regs
= tsk
->thread
.regs
;
1428 if (!cpu_has_feature(CPU_FTR_PPC_LE
) &&
1429 !cpu_has_feature(CPU_FTR_REAL_LE
))
1435 if (regs
->msr
& MSR_LE
) {
1436 if (cpu_has_feature(CPU_FTR_REAL_LE
))
1437 val
= PR_ENDIAN_LITTLE
;
1439 val
= PR_ENDIAN_PPC_LITTLE
;
1441 val
= PR_ENDIAN_BIG
;
1443 return put_user(val
, (unsigned int __user
*)adr
);
1446 int set_unalign_ctl(struct task_struct
*tsk
, unsigned int val
)
1448 tsk
->thread
.align_ctl
= val
;
1452 int get_unalign_ctl(struct task_struct
*tsk
, unsigned long adr
)
1454 return put_user(tsk
->thread
.align_ctl
, (unsigned int __user
*)adr
);
1457 static inline int valid_irq_stack(unsigned long sp
, struct task_struct
*p
,
1458 unsigned long nbytes
)
1460 unsigned long stack_page
;
1461 unsigned long cpu
= task_cpu(p
);
1464 * Avoid crashing if the stack has overflowed and corrupted
1465 * task_cpu(p), which is in the thread_info struct.
1467 if (cpu
< NR_CPUS
&& cpu_possible(cpu
)) {
1468 stack_page
= (unsigned long) hardirq_ctx
[cpu
];
1469 if (sp
>= stack_page
+ sizeof(struct thread_struct
)
1470 && sp
<= stack_page
+ THREAD_SIZE
- nbytes
)
1473 stack_page
= (unsigned long) softirq_ctx
[cpu
];
1474 if (sp
>= stack_page
+ sizeof(struct thread_struct
)
1475 && sp
<= stack_page
+ THREAD_SIZE
- nbytes
)
1481 int validate_sp(unsigned long sp
, struct task_struct
*p
,
1482 unsigned long nbytes
)
1484 unsigned long stack_page
= (unsigned long)task_stack_page(p
);
1486 if (sp
>= stack_page
+ sizeof(struct thread_struct
)
1487 && sp
<= stack_page
+ THREAD_SIZE
- nbytes
)
1490 return valid_irq_stack(sp
, p
, nbytes
);
1493 EXPORT_SYMBOL(validate_sp
);
1495 unsigned long get_wchan(struct task_struct
*p
)
1497 unsigned long ip
, sp
;
1500 if (!p
|| p
== current
|| p
->state
== TASK_RUNNING
)
1504 if (!validate_sp(sp
, p
, STACK_FRAME_OVERHEAD
))
1508 sp
= *(unsigned long *)sp
;
1509 if (!validate_sp(sp
, p
, STACK_FRAME_OVERHEAD
))
1512 ip
= ((unsigned long *)sp
)[STACK_FRAME_LR_SAVE
];
1513 if (!in_sched_functions(ip
))
1516 } while (count
++ < 16);
1520 static int kstack_depth_to_print
= CONFIG_PRINT_STACK_DEPTH
;
1522 void show_stack(struct task_struct
*tsk
, unsigned long *stack
)
1524 unsigned long sp
, ip
, lr
, newsp
;
1527 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
1528 int curr_frame
= current
->curr_ret_stack
;
1529 extern void return_to_handler(void);
1530 unsigned long rth
= (unsigned long)return_to_handler
;
1533 sp
= (unsigned long) stack
;
1538 sp
= current_stack_pointer();
1540 sp
= tsk
->thread
.ksp
;
1544 printk("Call Trace:\n");
1546 if (!validate_sp(sp
, tsk
, STACK_FRAME_OVERHEAD
))
1549 stack
= (unsigned long *) sp
;
1551 ip
= stack
[STACK_FRAME_LR_SAVE
];
1552 if (!firstframe
|| ip
!= lr
) {
1553 printk("["REG
"] ["REG
"] %pS", sp
, ip
, (void *)ip
);
1554 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
1555 if ((ip
== rth
) && curr_frame
>= 0) {
1557 (void *)current
->ret_stack
[curr_frame
].ret
);
1562 printk(" (unreliable)");
1568 * See if this is an exception frame.
1569 * We look for the "regshere" marker in the current frame.
1571 if (validate_sp(sp
, tsk
, STACK_INT_FRAME_SIZE
)
1572 && stack
[STACK_FRAME_MARKER
] == STACK_FRAME_REGS_MARKER
) {
1573 struct pt_regs
*regs
= (struct pt_regs
*)
1574 (sp
+ STACK_FRAME_OVERHEAD
);
1576 printk("--- interrupt: %lx at %pS\n LR = %pS\n",
1577 regs
->trap
, (void *)regs
->nip
, (void *)lr
);
1582 } while (count
++ < kstack_depth_to_print
);
1586 /* Called with hard IRQs off */
1587 void notrace
__ppc64_runlatch_on(void)
1589 struct thread_info
*ti
= current_thread_info();
1592 ctrl
= mfspr(SPRN_CTRLF
);
1593 ctrl
|= CTRL_RUNLATCH
;
1594 mtspr(SPRN_CTRLT
, ctrl
);
1596 ti
->local_flags
|= _TLF_RUNLATCH
;
1599 /* Called with hard IRQs off */
1600 void notrace
__ppc64_runlatch_off(void)
1602 struct thread_info
*ti
= current_thread_info();
1605 ti
->local_flags
&= ~_TLF_RUNLATCH
;
1607 ctrl
= mfspr(SPRN_CTRLF
);
1608 ctrl
&= ~CTRL_RUNLATCH
;
1609 mtspr(SPRN_CTRLT
, ctrl
);
1611 #endif /* CONFIG_PPC64 */
1613 unsigned long arch_align_stack(unsigned long sp
)
1615 if (!(current
->personality
& ADDR_NO_RANDOMIZE
) && randomize_va_space
)
1616 sp
-= get_random_int() & ~PAGE_MASK
;
1620 static inline unsigned long brk_rnd(void)
1622 unsigned long rnd
= 0;
1624 /* 8MB for 32bit, 1GB for 64bit */
1625 if (is_32bit_task())
1626 rnd
= (long)(get_random_int() % (1<<(23-PAGE_SHIFT
)));
1628 rnd
= (long)(get_random_int() % (1<<(30-PAGE_SHIFT
)));
1630 return rnd
<< PAGE_SHIFT
;
1633 unsigned long arch_randomize_brk(struct mm_struct
*mm
)
1635 unsigned long base
= mm
->brk
;
1638 #ifdef CONFIG_PPC_STD_MMU_64
1640 * If we are using 1TB segments and we are allowed to randomise
1641 * the heap, we can put it above 1TB so it is backed by a 1TB
1642 * segment. Otherwise the heap will be in the bottom 1TB
1643 * which always uses 256MB segments and this may result in a
1644 * performance penalty.
1646 if (!is_32bit_task() && (mmu_highuser_ssize
== MMU_SEGSIZE_1T
))
1647 base
= max_t(unsigned long, mm
->brk
, 1UL << SID_SHIFT_1T
);
1650 ret
= PAGE_ALIGN(base
+ brk_rnd());