tools, slub: Fix off-by-one buffer corruption after readlink() call
[linux-2.6/linux-mips.git] / arch / arm / mach-pxa / lpd270.c
blobc171d6ebee49805e1e529e6af8a4d664125cd68d
1 /*
2 * linux/arch/arm/mach-pxa/lpd270.c
4 * Support for the LogicPD PXA270 Card Engine.
5 * Derived from the mainstone code, which carries these notices:
7 * Author: Nicolas Pitre
8 * Created: Nov 05, 2002
9 * Copyright: MontaVista Software Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/syscore_ops.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/ioport.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/partitions.h>
26 #include <linux/pwm_backlight.h>
28 #include <asm/types.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <mach/hardware.h>
33 #include <asm/irq.h>
34 #include <asm/sizes.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
41 #include <mach/pxa27x.h>
42 #include <mach/gpio.h>
43 #include <mach/lpd270.h>
44 #include <mach/audio.h>
45 #include <mach/pxafb.h>
46 #include <mach/mmc.h>
47 #include <mach/irda.h>
48 #include <mach/ohci.h>
49 #include <mach/smemc.h>
51 #include "generic.h"
52 #include "devices.h"
54 static unsigned long lpd270_pin_config[] __initdata = {
55 /* Chip Selects */
56 GPIO15_nCS_1, /* Mainboard Flash */
57 GPIO78_nCS_2, /* CPLD + Ethernet */
59 /* LCD - 16bpp Active TFT */
60 GPIO58_LCD_LDD_0,
61 GPIO59_LCD_LDD_1,
62 GPIO60_LCD_LDD_2,
63 GPIO61_LCD_LDD_3,
64 GPIO62_LCD_LDD_4,
65 GPIO63_LCD_LDD_5,
66 GPIO64_LCD_LDD_6,
67 GPIO65_LCD_LDD_7,
68 GPIO66_LCD_LDD_8,
69 GPIO67_LCD_LDD_9,
70 GPIO68_LCD_LDD_10,
71 GPIO69_LCD_LDD_11,
72 GPIO70_LCD_LDD_12,
73 GPIO71_LCD_LDD_13,
74 GPIO72_LCD_LDD_14,
75 GPIO73_LCD_LDD_15,
76 GPIO74_LCD_FCLK,
77 GPIO75_LCD_LCLK,
78 GPIO76_LCD_PCLK,
79 GPIO77_LCD_BIAS,
80 GPIO16_PWM0_OUT, /* Backlight */
82 /* USB Host */
83 GPIO88_USBH1_PWR,
84 GPIO89_USBH1_PEN,
86 /* AC97 */
87 GPIO28_AC97_BITCLK,
88 GPIO29_AC97_SDATA_IN_0,
89 GPIO30_AC97_SDATA_OUT,
90 GPIO31_AC97_SYNC,
91 GPIO45_AC97_SYSCLK,
93 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
96 static unsigned int lpd270_irq_enabled;
98 static void lpd270_mask_irq(struct irq_data *d)
100 int lpd270_irq = d->irq - LPD270_IRQ(0);
102 __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
104 lpd270_irq_enabled &= ~(1 << lpd270_irq);
105 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
108 static void lpd270_unmask_irq(struct irq_data *d)
110 int lpd270_irq = d->irq - LPD270_IRQ(0);
112 lpd270_irq_enabled |= 1 << lpd270_irq;
113 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
116 static struct irq_chip lpd270_irq_chip = {
117 .name = "CPLD",
118 .irq_ack = lpd270_mask_irq,
119 .irq_mask = lpd270_mask_irq,
120 .irq_unmask = lpd270_unmask_irq,
123 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
125 unsigned long pending;
127 pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
128 do {
129 /* clear useless edge notification */
130 desc->irq_data.chip->irq_ack(&desc->irq_data);
131 if (likely(pending)) {
132 irq = LPD270_IRQ(0) + __ffs(pending);
133 generic_handle_irq(irq);
135 pending = __raw_readw(LPD270_INT_STATUS) &
136 lpd270_irq_enabled;
138 } while (pending);
141 static void __init lpd270_init_irq(void)
143 int irq;
145 pxa27x_init_irq();
147 __raw_writew(0, LPD270_INT_MASK);
148 __raw_writew(0, LPD270_INT_STATUS);
150 /* setup extra LogicPD PXA270 irqs */
151 for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
152 irq_set_chip_and_handler(irq, &lpd270_irq_chip,
153 handle_level_irq);
154 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
156 irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
157 irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
161 #ifdef CONFIG_PM
162 static void lpd270_irq_resume(void)
164 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
167 static struct syscore_ops lpd270_irq_syscore_ops = {
168 .resume = lpd270_irq_resume,
171 static int __init lpd270_irq_device_init(void)
173 if (machine_is_logicpd_pxa270()) {
174 register_syscore_ops(&lpd270_irq_syscore_ops);
175 return 0;
177 return -ENODEV;
180 device_initcall(lpd270_irq_device_init);
181 #endif
184 static struct resource smc91x_resources[] = {
185 [0] = {
186 .start = LPD270_ETH_PHYS,
187 .end = (LPD270_ETH_PHYS + 0xfffff),
188 .flags = IORESOURCE_MEM,
190 [1] = {
191 .start = LPD270_ETHERNET_IRQ,
192 .end = LPD270_ETHERNET_IRQ,
193 .flags = IORESOURCE_IRQ,
197 static struct platform_device smc91x_device = {
198 .name = "smc91x",
199 .id = 0,
200 .num_resources = ARRAY_SIZE(smc91x_resources),
201 .resource = smc91x_resources,
204 static struct resource lpd270_flash_resources[] = {
205 [0] = {
206 .start = PXA_CS0_PHYS,
207 .end = PXA_CS0_PHYS + SZ_64M - 1,
208 .flags = IORESOURCE_MEM,
210 [1] = {
211 .start = PXA_CS1_PHYS,
212 .end = PXA_CS1_PHYS + SZ_64M - 1,
213 .flags = IORESOURCE_MEM,
217 static struct mtd_partition lpd270_flash0_partitions[] = {
219 .name = "Bootloader",
220 .size = 0x00040000,
221 .offset = 0,
222 .mask_flags = MTD_WRITEABLE /* force read-only */
223 }, {
224 .name = "Kernel",
225 .size = 0x00400000,
226 .offset = 0x00040000,
227 }, {
228 .name = "Filesystem",
229 .size = MTDPART_SIZ_FULL,
230 .offset = 0x00440000
234 static struct flash_platform_data lpd270_flash_data[2] = {
236 .name = "processor-flash",
237 .map_name = "cfi_probe",
238 .parts = lpd270_flash0_partitions,
239 .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
240 }, {
241 .name = "mainboard-flash",
242 .map_name = "cfi_probe",
243 .parts = NULL,
244 .nr_parts = 0,
248 static struct platform_device lpd270_flash_device[2] = {
250 .name = "pxa2xx-flash",
251 .id = 0,
252 .dev = {
253 .platform_data = &lpd270_flash_data[0],
255 .resource = &lpd270_flash_resources[0],
256 .num_resources = 1,
257 }, {
258 .name = "pxa2xx-flash",
259 .id = 1,
260 .dev = {
261 .platform_data = &lpd270_flash_data[1],
263 .resource = &lpd270_flash_resources[1],
264 .num_resources = 1,
268 static struct platform_pwm_backlight_data lpd270_backlight_data = {
269 .pwm_id = 0,
270 .max_brightness = 1,
271 .dft_brightness = 1,
272 .pwm_period_ns = 78770,
275 static struct platform_device lpd270_backlight_device = {
276 .name = "pwm-backlight",
277 .dev = {
278 .parent = &pxa27x_device_pwm0.dev,
279 .platform_data = &lpd270_backlight_data,
283 /* 5.7" TFT QVGA (LoLo display number 1) */
284 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
285 .pixclock = 150000,
286 .xres = 320,
287 .yres = 240,
288 .bpp = 16,
289 .hsync_len = 0x14,
290 .left_margin = 0x28,
291 .right_margin = 0x0a,
292 .vsync_len = 0x02,
293 .upper_margin = 0x08,
294 .lower_margin = 0x14,
295 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
298 static struct pxafb_mach_info sharp_lq057q3dc02 = {
299 .modes = &sharp_lq057q3dc02_mode,
300 .num_modes = 1,
301 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
302 LCD_ALTERNATE_MAPPING,
305 /* 12.1" TFT SVGA (LoLo display number 2) */
306 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
307 .pixclock = 50000,
308 .xres = 800,
309 .yres = 600,
310 .bpp = 16,
311 .hsync_len = 0x05,
312 .left_margin = 0x52,
313 .right_margin = 0x05,
314 .vsync_len = 0x04,
315 .upper_margin = 0x14,
316 .lower_margin = 0x0a,
317 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
320 static struct pxafb_mach_info sharp_lq121s1dg31 = {
321 .modes = &sharp_lq121s1dg31_mode,
322 .num_modes = 1,
323 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
324 LCD_ALTERNATE_MAPPING,
327 /* 3.6" TFT QVGA (LoLo display number 3) */
328 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
329 .pixclock = 150000,
330 .xres = 320,
331 .yres = 240,
332 .bpp = 16,
333 .hsync_len = 0x0e,
334 .left_margin = 0x04,
335 .right_margin = 0x0a,
336 .vsync_len = 0x03,
337 .upper_margin = 0x03,
338 .lower_margin = 0x03,
339 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
342 static struct pxafb_mach_info sharp_lq036q1da01 = {
343 .modes = &sharp_lq036q1da01_mode,
344 .num_modes = 1,
345 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
346 LCD_ALTERNATE_MAPPING,
349 /* 6.4" TFT VGA (LoLo display number 5) */
350 static struct pxafb_mode_info sharp_lq64d343_mode = {
351 .pixclock = 25000,
352 .xres = 640,
353 .yres = 480,
354 .bpp = 16,
355 .hsync_len = 0x31,
356 .left_margin = 0x89,
357 .right_margin = 0x19,
358 .vsync_len = 0x12,
359 .upper_margin = 0x22,
360 .lower_margin = 0x00,
361 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
364 static struct pxafb_mach_info sharp_lq64d343 = {
365 .modes = &sharp_lq64d343_mode,
366 .num_modes = 1,
367 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
368 LCD_ALTERNATE_MAPPING,
371 /* 10.4" TFT VGA (LoLo display number 7) */
372 static struct pxafb_mode_info sharp_lq10d368_mode = {
373 .pixclock = 25000,
374 .xres = 640,
375 .yres = 480,
376 .bpp = 16,
377 .hsync_len = 0x31,
378 .left_margin = 0x89,
379 .right_margin = 0x19,
380 .vsync_len = 0x12,
381 .upper_margin = 0x22,
382 .lower_margin = 0x00,
383 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
386 static struct pxafb_mach_info sharp_lq10d368 = {
387 .modes = &sharp_lq10d368_mode,
388 .num_modes = 1,
389 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
390 LCD_ALTERNATE_MAPPING,
393 /* 3.5" TFT QVGA (LoLo display number 8) */
394 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
395 .pixclock = 150000,
396 .xres = 240,
397 .yres = 320,
398 .bpp = 16,
399 .hsync_len = 0x0e,
400 .left_margin = 0x0a,
401 .right_margin = 0x0a,
402 .vsync_len = 0x03,
403 .upper_margin = 0x05,
404 .lower_margin = 0x14,
405 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
408 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
409 .modes = &sharp_lq035q7db02_20_mode,
410 .num_modes = 1,
411 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
412 LCD_ALTERNATE_MAPPING,
415 static struct pxafb_mach_info *lpd270_lcd_to_use;
417 static int __init lpd270_set_lcd(char *str)
419 if (!strnicmp(str, "lq057q3dc02", 11)) {
420 lpd270_lcd_to_use = &sharp_lq057q3dc02;
421 } else if (!strnicmp(str, "lq121s1dg31", 11)) {
422 lpd270_lcd_to_use = &sharp_lq121s1dg31;
423 } else if (!strnicmp(str, "lq036q1da01", 11)) {
424 lpd270_lcd_to_use = &sharp_lq036q1da01;
425 } else if (!strnicmp(str, "lq64d343", 8)) {
426 lpd270_lcd_to_use = &sharp_lq64d343;
427 } else if (!strnicmp(str, "lq10d368", 8)) {
428 lpd270_lcd_to_use = &sharp_lq10d368;
429 } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
430 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
431 } else {
432 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
435 return 1;
438 __setup("lcd=", lpd270_set_lcd);
440 static struct platform_device *platform_devices[] __initdata = {
441 &smc91x_device,
442 &lpd270_backlight_device,
443 &lpd270_flash_device[0],
444 &lpd270_flash_device[1],
447 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
448 .port_mode = PMM_PERPORT_MODE,
449 .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
452 static void __init lpd270_init(void)
454 pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
456 pxa_set_ffuart_info(NULL);
457 pxa_set_btuart_info(NULL);
458 pxa_set_stuart_info(NULL);
460 lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
461 lpd270_flash_data[1].width = 4;
464 * System bus arbiter setting:
465 * - Core_Park
466 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
468 ARB_CNTRL = ARB_CORE_PARK | 0x234;
470 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
472 pxa_set_ac97_info(NULL);
474 if (lpd270_lcd_to_use != NULL)
475 pxa_set_fb_info(NULL, lpd270_lcd_to_use);
477 pxa_set_ohci_info(&lpd270_ohci_platform_data);
481 static struct map_desc lpd270_io_desc[] __initdata = {
483 .virtual = LPD270_CPLD_VIRT,
484 .pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
485 .length = LPD270_CPLD_SIZE,
486 .type = MT_DEVICE,
490 static void __init lpd270_map_io(void)
492 pxa27x_map_io();
493 iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
495 /* for use I SRAM as framebuffer. */
496 PSLR |= 0x00000F04;
497 PCFR = 0x00000066;
500 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
501 /* Maintainer: Peter Barada */
502 .boot_params = 0xa0000100,
503 .map_io = lpd270_map_io,
504 .nr_irqs = LPD270_NR_IRQS,
505 .init_irq = lpd270_init_irq,
506 .handle_irq = pxa27x_handle_irq,
507 .timer = &pxa_timer,
508 .init_machine = lpd270_init,
509 MACHINE_END