1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
31 #include "iwl-agn-calib.h"
32 #include "iwl-helpers.h"
33 #include "iwl-trans.h"
35 static int iwlagn_disable_bss(struct iwl_priv
*priv
,
36 struct iwl_rxon_context
*ctx
,
37 struct iwl_rxon_cmd
*send
)
39 __le32 old_filter
= send
->filter_flags
;
42 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
43 ret
= trans_send_cmd_pdu(&priv
->trans
, ctx
->rxon_cmd
,
44 CMD_SYNC
, sizeof(*send
), send
);
46 send
->filter_flags
= old_filter
;
49 IWL_ERR(priv
, "Error clearing ASSOC_MSK on BSS (%d)\n", ret
);
54 static int iwlagn_disable_pan(struct iwl_priv
*priv
,
55 struct iwl_rxon_context
*ctx
,
56 struct iwl_rxon_cmd
*send
)
58 struct iwl_notification_wait disable_wait
;
59 __le32 old_filter
= send
->filter_flags
;
60 u8 old_dev_type
= send
->dev_type
;
63 iwlagn_init_notification_wait(priv
, &disable_wait
,
64 REPLY_WIPAN_DEACTIVATION_COMPLETE
,
67 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
68 send
->dev_type
= RXON_DEV_TYPE_P2P
;
69 ret
= trans_send_cmd_pdu(&priv
->trans
, ctx
->rxon_cmd
,
70 CMD_SYNC
, sizeof(*send
), send
);
72 send
->filter_flags
= old_filter
;
73 send
->dev_type
= old_dev_type
;
76 IWL_ERR(priv
, "Error disabling PAN (%d)\n", ret
);
77 iwlagn_remove_notification(priv
, &disable_wait
);
79 ret
= iwlagn_wait_notification(priv
, &disable_wait
, HZ
);
81 IWL_ERR(priv
, "Timed out waiting for PAN disable\n");
87 static int iwlagn_disconn_pan(struct iwl_priv
*priv
,
88 struct iwl_rxon_context
*ctx
,
89 struct iwl_rxon_cmd
*send
)
91 __le32 old_filter
= send
->filter_flags
;
94 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
95 ret
= trans_send_cmd_pdu(&priv
->trans
, ctx
->rxon_cmd
, CMD_SYNC
,
98 send
->filter_flags
= old_filter
;
103 static void iwlagn_update_qos(struct iwl_priv
*priv
,
104 struct iwl_rxon_context
*ctx
)
111 ctx
->qos_data
.def_qos_parm
.qos_flags
= 0;
113 if (ctx
->qos_data
.qos_active
)
114 ctx
->qos_data
.def_qos_parm
.qos_flags
|=
115 QOS_PARAM_FLG_UPDATE_EDCA_MSK
;
118 ctx
->qos_data
.def_qos_parm
.qos_flags
|= QOS_PARAM_FLG_TGN_MSK
;
120 IWL_DEBUG_QOS(priv
, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
121 ctx
->qos_data
.qos_active
,
122 ctx
->qos_data
.def_qos_parm
.qos_flags
);
124 ret
= trans_send_cmd_pdu(&priv
->trans
, ctx
->qos_cmd
, CMD_SYNC
,
125 sizeof(struct iwl_qosparam_cmd
),
126 &ctx
->qos_data
.def_qos_parm
);
128 IWL_ERR(priv
, "Failed to update QoS\n");
131 static int iwlagn_update_beacon(struct iwl_priv
*priv
,
132 struct ieee80211_vif
*vif
)
134 lockdep_assert_held(&priv
->mutex
);
136 dev_kfree_skb(priv
->beacon_skb
);
137 priv
->beacon_skb
= ieee80211_beacon_get(priv
->hw
, vif
);
138 if (!priv
->beacon_skb
)
140 return iwlagn_send_beacon_cmd(priv
);
143 static int iwlagn_send_rxon_assoc(struct iwl_priv
*priv
,
144 struct iwl_rxon_context
*ctx
)
147 struct iwl_rxon_assoc_cmd rxon_assoc
;
148 const struct iwl_rxon_cmd
*rxon1
= &ctx
->staging
;
149 const struct iwl_rxon_cmd
*rxon2
= &ctx
->active
;
151 if ((rxon1
->flags
== rxon2
->flags
) &&
152 (rxon1
->filter_flags
== rxon2
->filter_flags
) &&
153 (rxon1
->cck_basic_rates
== rxon2
->cck_basic_rates
) &&
154 (rxon1
->ofdm_ht_single_stream_basic_rates
==
155 rxon2
->ofdm_ht_single_stream_basic_rates
) &&
156 (rxon1
->ofdm_ht_dual_stream_basic_rates
==
157 rxon2
->ofdm_ht_dual_stream_basic_rates
) &&
158 (rxon1
->ofdm_ht_triple_stream_basic_rates
==
159 rxon2
->ofdm_ht_triple_stream_basic_rates
) &&
160 (rxon1
->acquisition_data
== rxon2
->acquisition_data
) &&
161 (rxon1
->rx_chain
== rxon2
->rx_chain
) &&
162 (rxon1
->ofdm_basic_rates
== rxon2
->ofdm_basic_rates
)) {
163 IWL_DEBUG_INFO(priv
, "Using current RXON_ASSOC. Not resending.\n");
167 rxon_assoc
.flags
= ctx
->staging
.flags
;
168 rxon_assoc
.filter_flags
= ctx
->staging
.filter_flags
;
169 rxon_assoc
.ofdm_basic_rates
= ctx
->staging
.ofdm_basic_rates
;
170 rxon_assoc
.cck_basic_rates
= ctx
->staging
.cck_basic_rates
;
171 rxon_assoc
.reserved1
= 0;
172 rxon_assoc
.reserved2
= 0;
173 rxon_assoc
.reserved3
= 0;
174 rxon_assoc
.ofdm_ht_single_stream_basic_rates
=
175 ctx
->staging
.ofdm_ht_single_stream_basic_rates
;
176 rxon_assoc
.ofdm_ht_dual_stream_basic_rates
=
177 ctx
->staging
.ofdm_ht_dual_stream_basic_rates
;
178 rxon_assoc
.rx_chain_select_flags
= ctx
->staging
.rx_chain
;
179 rxon_assoc
.ofdm_ht_triple_stream_basic_rates
=
180 ctx
->staging
.ofdm_ht_triple_stream_basic_rates
;
181 rxon_assoc
.acquisition_data
= ctx
->staging
.acquisition_data
;
183 ret
= trans_send_cmd_pdu(&priv
->trans
, ctx
->rxon_assoc_cmd
,
184 CMD_ASYNC
, sizeof(rxon_assoc
), &rxon_assoc
);
188 static int iwlagn_rxon_disconn(struct iwl_priv
*priv
,
189 struct iwl_rxon_context
*ctx
)
192 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
194 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
) {
195 ret
= iwlagn_disable_bss(priv
, ctx
, &ctx
->staging
);
197 ret
= iwlagn_disable_pan(priv
, ctx
, &ctx
->staging
);
201 ret
= iwl_send_rxon_timing(priv
, ctx
);
203 IWL_ERR(priv
, "Failed to send timing (%d)!\n", ret
);
206 ret
= iwlagn_disconn_pan(priv
, ctx
, &ctx
->staging
);
213 * Un-assoc RXON clears the station table and WEP
214 * keys, so we have to restore those afterwards.
216 iwl_clear_ucode_stations(priv
, ctx
);
217 /* update -- might need P2P now */
218 iwl_update_bcast_station(priv
, ctx
);
219 iwl_restore_stations(priv
, ctx
);
220 ret
= iwl_restore_default_wep_keys(priv
, ctx
);
222 IWL_ERR(priv
, "Failed to restore WEP keys (%d)\n", ret
);
226 memcpy(active
, &ctx
->staging
, sizeof(*active
));
230 static int iwlagn_rxon_connect(struct iwl_priv
*priv
,
231 struct iwl_rxon_context
*ctx
)
234 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
236 /* RXON timing must be before associated RXON */
237 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
) {
238 ret
= iwl_send_rxon_timing(priv
, ctx
);
240 IWL_ERR(priv
, "Failed to send timing (%d)!\n", ret
);
244 /* QoS info may be cleared by previous un-assoc RXON */
245 iwlagn_update_qos(priv
, ctx
);
248 * We'll run into this code path when beaconing is
249 * enabled, but then we also need to send the beacon
252 if (ctx
->vif
&& (ctx
->vif
->type
== NL80211_IFTYPE_AP
)) {
253 ret
= iwlagn_update_beacon(priv
, ctx
->vif
);
256 "Error sending required beacon (%d)!\n",
262 priv
->start_calib
= 0;
264 * Apply the new configuration.
266 * Associated RXON doesn't clear the station table in uCode,
267 * so we don't need to restore stations etc. after this.
269 ret
= trans_send_cmd_pdu(&priv
->trans
, ctx
->rxon_cmd
, CMD_SYNC
,
270 sizeof(struct iwl_rxon_cmd
), &ctx
->staging
);
272 IWL_ERR(priv
, "Error setting new RXON (%d)\n", ret
);
275 memcpy(active
, &ctx
->staging
, sizeof(*active
));
277 iwl_reprogram_ap_sta(priv
, ctx
);
279 /* IBSS beacon needs to be sent after setting assoc */
280 if (ctx
->vif
&& (ctx
->vif
->type
== NL80211_IFTYPE_ADHOC
))
281 if (iwlagn_update_beacon(priv
, ctx
->vif
))
282 IWL_ERR(priv
, "Error sending IBSS beacon\n");
283 iwl_init_sensitivity(priv
);
286 * If we issue a new RXON command which required a tune then
287 * we must send a new TXPOWER command or we won't be able to
290 * It's expected we set power here if channel is changing.
292 ret
= iwl_set_tx_power(priv
, priv
->tx_power_next
, true);
294 IWL_ERR(priv
, "Error sending TX power (%d)\n", ret
);
298 if ((ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
) &&
299 priv
->cfg
->ht_params
->smps_mode
)
300 ieee80211_request_smps(ctx
->vif
,
301 priv
->cfg
->ht_params
->smps_mode
);
306 int iwlagn_set_pan_params(struct iwl_priv
*priv
)
308 struct iwl_wipan_params_cmd cmd
;
309 struct iwl_rxon_context
*ctx_bss
, *ctx_pan
;
310 int slot0
= 300, slot1
= 0;
313 if (priv
->valid_contexts
== BIT(IWL_RXON_CTX_BSS
))
316 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
318 lockdep_assert_held(&priv
->mutex
);
320 ctx_bss
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
321 ctx_pan
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
324 * If the PAN context is inactive, then we don't need
325 * to update the PAN parameters, the last thing we'll
326 * have done before it goes inactive is making the PAN
327 * parameters be WLAN-only.
329 if (!ctx_pan
->is_active
)
332 memset(&cmd
, 0, sizeof(cmd
));
334 /* only 2 slots are currently allowed */
337 cmd
.slots
[0].type
= 0; /* BSS */
338 cmd
.slots
[1].type
= 1; /* PAN */
340 if (priv
->hw_roc_channel
) {
341 /* both contexts must be used for this to happen */
342 slot1
= priv
->hw_roc_duration
;
343 slot0
= IWL_MIN_SLOT_TIME
;
344 } else if (ctx_bss
->vif
&& ctx_pan
->vif
) {
345 int bcnint
= ctx_pan
->beacon_int
;
346 int dtim
= ctx_pan
->vif
->bss_conf
.dtim_period
?: 1;
348 /* should be set, but seems unused?? */
349 cmd
.flags
|= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE
);
351 if (ctx_pan
->vif
->type
== NL80211_IFTYPE_AP
&&
353 bcnint
!= ctx_bss
->beacon_int
) {
355 "beacon intervals don't match (%d, %d)\n",
356 ctx_bss
->beacon_int
, ctx_pan
->beacon_int
);
358 bcnint
= max_t(int, bcnint
,
359 ctx_bss
->beacon_int
);
361 bcnint
= DEFAULT_BEACON_INTERVAL
;
363 slot1
= bcnint
- slot0
;
365 if (test_bit(STATUS_SCAN_HW
, &priv
->status
) ||
366 (!ctx_bss
->vif
->bss_conf
.idle
&&
367 !ctx_bss
->vif
->bss_conf
.assoc
)) {
368 slot0
= dtim
* bcnint
* 3 - IWL_MIN_SLOT_TIME
;
369 slot1
= IWL_MIN_SLOT_TIME
;
370 } else if (!ctx_pan
->vif
->bss_conf
.idle
&&
371 !ctx_pan
->vif
->bss_conf
.assoc
) {
372 slot1
= bcnint
* 3 - IWL_MIN_SLOT_TIME
;
373 slot0
= IWL_MIN_SLOT_TIME
;
375 } else if (ctx_pan
->vif
) {
377 slot1
= max_t(int, 1, ctx_pan
->vif
->bss_conf
.dtim_period
) *
379 slot1
= max_t(int, DEFAULT_BEACON_INTERVAL
, slot1
);
381 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
382 slot0
= slot1
* 3 - IWL_MIN_SLOT_TIME
;
383 slot1
= IWL_MIN_SLOT_TIME
;
387 cmd
.slots
[0].width
= cpu_to_le16(slot0
);
388 cmd
.slots
[1].width
= cpu_to_le16(slot1
);
390 ret
= trans_send_cmd_pdu(&priv
->trans
, REPLY_WIPAN_PARAMS
, CMD_SYNC
,
393 IWL_ERR(priv
, "Error setting PAN parameters (%d)\n", ret
);
399 * iwlagn_commit_rxon - commit staging_rxon to hardware
401 * The RXON command in staging_rxon is committed to the hardware and
402 * the active_rxon structure is updated with the new data. This
403 * function correctly transitions out of the RXON_ASSOC_MSK state if
404 * a HW tune is required based on the RXON structure changes.
406 * The connect/disconnect flow should be as the following:
408 * 1. make sure send RXON command with association bit unset if not connect
409 * this should include the channel and the band for the candidate
411 * 2. Add Station before RXON association with the AP
412 * 3. RXON_timing has to send before RXON for connection
413 * 4. full RXON command - associated bit set
414 * 5. use RXON_ASSOC command to update any flags changes
416 int iwlagn_commit_rxon(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
418 /* cast away the const for active_rxon in this function */
419 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
420 bool new_assoc
= !!(ctx
->staging
.filter_flags
& RXON_FILTER_ASSOC_MSK
);
423 lockdep_assert_held(&priv
->mutex
);
425 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
428 if (!iwl_is_alive(priv
))
431 /* This function hardcodes a bunch of dual-mode assumptions */
432 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
437 /* always get timestamp with Rx frame */
438 ctx
->staging
.flags
|= RXON_FLG_TSF2HOST_MSK
;
440 if (ctx
->ctxid
== IWL_RXON_CTX_PAN
&& priv
->hw_roc_channel
) {
441 struct ieee80211_channel
*chan
= priv
->hw_roc_channel
;
443 iwl_set_rxon_channel(priv
, chan
, ctx
);
444 iwl_set_flags_for_band(priv
, ctx
, chan
->band
, NULL
);
445 ctx
->staging
.filter_flags
|=
446 RXON_FILTER_ASSOC_MSK
|
447 RXON_FILTER_PROMISC_MSK
|
448 RXON_FILTER_CTL2HOST_MSK
;
449 ctx
->staging
.dev_type
= RXON_DEV_TYPE_P2P
;
452 if (memcmp(&ctx
->staging
, &ctx
->active
,
453 sizeof(ctx
->staging
)) == 0)
458 * force CTS-to-self frames protection if RTS-CTS is not preferred
459 * one aggregation protection method
461 if (!(priv
->cfg
->ht_params
&&
462 priv
->cfg
->ht_params
->use_rts_for_aggregation
))
463 ctx
->staging
.flags
|= RXON_FLG_SELF_CTS_EN
;
465 if ((ctx
->vif
&& ctx
->vif
->bss_conf
.use_short_slot
) ||
466 !(ctx
->staging
.flags
& RXON_FLG_BAND_24G_MSK
))
467 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
469 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
471 iwl_print_rx_config_cmd(priv
, ctx
);
472 ret
= iwl_check_rxon_cmd(priv
, ctx
);
474 IWL_ERR(priv
, "Invalid RXON configuration. Not committing.\n");
479 * receive commit_rxon request
480 * abort any previous channel switch if still in process
482 if (test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
) &&
483 (priv
->switch_channel
!= ctx
->staging
.channel
)) {
484 IWL_DEBUG_11H(priv
, "abort channel switch on %d\n",
485 le16_to_cpu(priv
->switch_channel
));
486 iwl_chswitch_done(priv
, false);
490 * If we don't need to send a full RXON, we can use
491 * iwl_rxon_assoc_cmd which is used to reconfigure filter
492 * and other flags for the current radio configuration.
494 if (!iwl_full_rxon_required(priv
, ctx
)) {
495 ret
= iwlagn_send_rxon_assoc(priv
, ctx
);
497 IWL_ERR(priv
, "Error setting RXON_ASSOC (%d)\n", ret
);
501 memcpy(active
, &ctx
->staging
, sizeof(*active
));
503 * We do not commit tx power settings while channel changing,
504 * do it now if after settings changed.
506 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
508 /* make sure we are in the right PS state */
509 iwl_power_update_mode(priv
, true);
514 iwl_set_rxon_hwcrypto(priv
, ctx
, !iwlagn_mod_params
.sw_crypto
);
517 "Going to commit RXON\n"
518 " * with%s RXON_FILTER_ASSOC_MSK\n"
521 (new_assoc
? "" : "out"),
522 le16_to_cpu(ctx
->staging
.channel
),
523 ctx
->staging
.bssid_addr
);
526 * Always clear associated first, but with the correct config.
527 * This is required as for example station addition for the
528 * AP station must be done after the BSSID is set to correctly
529 * set up filters in the device.
531 ret
= iwlagn_rxon_disconn(priv
, ctx
);
535 ret
= iwlagn_set_pan_params(priv
);
540 return iwlagn_rxon_connect(priv
, ctx
);
545 int iwlagn_mac_config(struct ieee80211_hw
*hw
, u32 changed
)
547 struct iwl_priv
*priv
= hw
->priv
;
548 struct iwl_rxon_context
*ctx
;
549 struct ieee80211_conf
*conf
= &hw
->conf
;
550 struct ieee80211_channel
*channel
= conf
->channel
;
551 const struct iwl_channel_info
*ch_info
;
554 IWL_DEBUG_MAC80211(priv
, "changed %#x", changed
);
556 mutex_lock(&priv
->mutex
);
558 if (unlikely(test_bit(STATUS_SCANNING
, &priv
->status
))) {
559 IWL_DEBUG_MAC80211(priv
, "leave - scanning\n");
563 if (!iwl_is_ready(priv
)) {
564 IWL_DEBUG_MAC80211(priv
, "leave - not ready\n");
568 if (changed
& (IEEE80211_CONF_CHANGE_SMPS
|
569 IEEE80211_CONF_CHANGE_CHANNEL
)) {
570 /* mac80211 uses static for non-HT which is what we want */
571 priv
->current_ht_config
.smps
= conf
->smps_mode
;
574 * Recalculate chain counts.
576 * If monitor mode is enabled then mac80211 will
577 * set up the SM PS mode to OFF if an HT channel is
580 for_each_context(priv
, ctx
)
581 iwlagn_set_rxon_chain(priv
, ctx
);
584 if (changed
& IEEE80211_CONF_CHANGE_CHANNEL
) {
587 ch_info
= iwl_get_channel_info(priv
, channel
->band
,
589 if (!is_channel_valid(ch_info
)) {
590 IWL_DEBUG_MAC80211(priv
, "leave - invalid channel\n");
595 spin_lock_irqsave(&priv
->lock
, flags
);
597 for_each_context(priv
, ctx
) {
598 /* Configure HT40 channels */
599 if (ctx
->ht
.enabled
!= conf_is_ht(conf
))
600 ctx
->ht
.enabled
= conf_is_ht(conf
);
602 if (ctx
->ht
.enabled
) {
603 if (conf_is_ht40_minus(conf
)) {
604 ctx
->ht
.extension_chan_offset
=
605 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
606 ctx
->ht
.is_40mhz
= true;
607 } else if (conf_is_ht40_plus(conf
)) {
608 ctx
->ht
.extension_chan_offset
=
609 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
610 ctx
->ht
.is_40mhz
= true;
612 ctx
->ht
.extension_chan_offset
=
613 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
614 ctx
->ht
.is_40mhz
= false;
617 ctx
->ht
.is_40mhz
= false;
620 * Default to no protection. Protection mode will
621 * later be set from BSS config in iwl_ht_conf
623 ctx
->ht
.protection
= IEEE80211_HT_OP_MODE_PROTECTION_NONE
;
625 /* if we are switching from ht to 2.4 clear flags
626 * from any ht related info since 2.4 does not
628 if (le16_to_cpu(ctx
->staging
.channel
) !=
630 ctx
->staging
.flags
= 0;
632 iwl_set_rxon_channel(priv
, channel
, ctx
);
633 iwl_set_rxon_ht(priv
, &priv
->current_ht_config
);
635 iwl_set_flags_for_band(priv
, ctx
, channel
->band
,
639 spin_unlock_irqrestore(&priv
->lock
, flags
);
641 iwl_update_bcast_stations(priv
);
644 * The list of supported rates and rate mask can be different
645 * for each band; since the band may have changed, reset
646 * the rate mask to what mac80211 lists.
651 if (changed
& (IEEE80211_CONF_CHANGE_PS
|
652 IEEE80211_CONF_CHANGE_IDLE
)) {
653 ret
= iwl_power_update_mode(priv
, false);
655 IWL_DEBUG_MAC80211(priv
, "Error setting sleep level\n");
658 if (changed
& IEEE80211_CONF_CHANGE_POWER
) {
659 IWL_DEBUG_MAC80211(priv
, "TX Power old=%d new=%d\n",
660 priv
->tx_power_user_lmt
, conf
->power_level
);
662 iwl_set_tx_power(priv
, conf
->power_level
, false);
665 for_each_context(priv
, ctx
) {
666 if (!memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
668 iwlagn_commit_rxon(priv
, ctx
);
671 mutex_unlock(&priv
->mutex
);
675 static void iwlagn_check_needed_chains(struct iwl_priv
*priv
,
676 struct iwl_rxon_context
*ctx
,
677 struct ieee80211_bss_conf
*bss_conf
)
679 struct ieee80211_vif
*vif
= ctx
->vif
;
680 struct iwl_rxon_context
*tmp
;
681 struct ieee80211_sta
*sta
;
682 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
683 struct ieee80211_sta_ht_cap
*ht_cap
;
686 lockdep_assert_held(&priv
->mutex
);
689 case NL80211_IFTYPE_STATION
:
691 sta
= ieee80211_find_sta(vif
, bss_conf
->bssid
);
694 * If at all, this can only happen through a race
695 * when the AP disconnects us while we're still
696 * setting up the connection, in that case mac80211
697 * will soon tell us about that.
699 need_multiple
= false;
704 ht_cap
= &sta
->ht_cap
;
706 need_multiple
= true;
709 * If the peer advertises no support for receiving 2 and 3
710 * stream MCS rates, it can't be transmitting them either.
712 if (ht_cap
->mcs
.rx_mask
[1] == 0 &&
713 ht_cap
->mcs
.rx_mask
[2] == 0) {
714 need_multiple
= false;
715 } else if (!(ht_cap
->mcs
.tx_params
&
716 IEEE80211_HT_MCS_TX_DEFINED
)) {
717 /* If it can't TX MCS at all ... */
718 need_multiple
= false;
719 } else if (ht_cap
->mcs
.tx_params
&
720 IEEE80211_HT_MCS_TX_RX_DIFF
) {
724 * But if it can receive them, it might still not
725 * be able to transmit them, which is what we need
726 * to check here -- so check the number of streams
727 * it advertises for TX (if different from RX).
730 maxstreams
= (ht_cap
->mcs
.tx_params
&
731 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK
);
733 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT
;
737 need_multiple
= false;
742 case NL80211_IFTYPE_ADHOC
:
744 need_multiple
= false;
748 need_multiple
= true;
752 ctx
->ht_need_multiple_chains
= need_multiple
;
754 if (!need_multiple
) {
755 /* check all contexts */
756 for_each_context(priv
, tmp
) {
759 if (tmp
->ht_need_multiple_chains
) {
760 need_multiple
= true;
766 ht_conf
->single_chain_sufficient
= !need_multiple
;
769 static void iwlagn_chain_noise_reset(struct iwl_priv
*priv
)
771 struct iwl_chain_noise_data
*data
= &priv
->chain_noise_data
;
774 if ((data
->state
== IWL_CHAIN_NOISE_ALIVE
) &&
775 iwl_is_any_associated(priv
)) {
776 struct iwl_calib_chain_noise_reset_cmd cmd
;
778 /* clear data for chain noise calibration algorithm */
779 data
->chain_noise_a
= 0;
780 data
->chain_noise_b
= 0;
781 data
->chain_noise_c
= 0;
782 data
->chain_signal_a
= 0;
783 data
->chain_signal_b
= 0;
784 data
->chain_signal_c
= 0;
785 data
->beacon_count
= 0;
787 memset(&cmd
, 0, sizeof(cmd
));
788 iwl_set_calib_hdr(&cmd
.hdr
,
789 priv
->phy_calib_chain_noise_reset_cmd
);
790 ret
= trans_send_cmd_pdu(&priv
->trans
,
791 REPLY_PHY_CALIBRATION_CMD
,
792 CMD_SYNC
, sizeof(cmd
), &cmd
);
795 "Could not send REPLY_PHY_CALIBRATION_CMD\n");
796 data
->state
= IWL_CHAIN_NOISE_ACCUMULATE
;
797 IWL_DEBUG_CALIB(priv
, "Run chain_noise_calibrate\n");
801 void iwlagn_bss_info_changed(struct ieee80211_hw
*hw
,
802 struct ieee80211_vif
*vif
,
803 struct ieee80211_bss_conf
*bss_conf
,
806 struct iwl_priv
*priv
= hw
->priv
;
807 struct iwl_rxon_context
*ctx
= iwl_rxon_ctx_from_vif(vif
);
811 mutex_lock(&priv
->mutex
);
813 if (unlikely(!iwl_is_ready(priv
))) {
814 IWL_DEBUG_MAC80211(priv
, "leave - not ready\n");
815 mutex_unlock(&priv
->mutex
);
819 if (unlikely(!ctx
->vif
)) {
820 IWL_DEBUG_MAC80211(priv
, "leave - vif is NULL\n");
821 mutex_unlock(&priv
->mutex
);
825 if (changes
& BSS_CHANGED_BEACON_INT
)
828 if (changes
& BSS_CHANGED_QOS
) {
829 ctx
->qos_data
.qos_active
= bss_conf
->qos
;
830 iwlagn_update_qos(priv
, ctx
);
833 ctx
->staging
.assoc_id
= cpu_to_le16(vif
->bss_conf
.aid
);
834 if (vif
->bss_conf
.use_short_preamble
)
835 ctx
->staging
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
837 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
839 if (changes
& BSS_CHANGED_ASSOC
) {
840 if (bss_conf
->assoc
) {
841 priv
->timestamp
= bss_conf
->timestamp
;
842 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
845 * If we disassociate while there are pending
846 * frames, just wake up the queues and let the
847 * frames "escape" ... This shouldn't really
848 * be happening to start with, but we should
849 * not get stuck in this case either since it
850 * can happen if userspace gets confused.
852 if (ctx
->last_tx_rejected
) {
853 ctx
->last_tx_rejected
= false;
854 iwl_wake_any_queue(priv
, ctx
);
856 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
858 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
)
859 priv
->have_rekey_data
= false;
862 iwlagn_bt_coex_rssi_monitor(priv
);
865 if (ctx
->ht
.enabled
) {
866 ctx
->ht
.protection
= bss_conf
->ht_operation_mode
&
867 IEEE80211_HT_OP_MODE_PROTECTION
;
868 ctx
->ht
.non_gf_sta_present
= !!(bss_conf
->ht_operation_mode
&
869 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT
);
870 iwlagn_check_needed_chains(priv
, ctx
, bss_conf
);
871 iwl_set_rxon_ht(priv
, &priv
->current_ht_config
);
874 iwlagn_set_rxon_chain(priv
, ctx
);
876 if (bss_conf
->use_cts_prot
&& (priv
->band
!= IEEE80211_BAND_5GHZ
))
877 ctx
->staging
.flags
|= RXON_FLG_TGG_PROTECT_MSK
;
879 ctx
->staging
.flags
&= ~RXON_FLG_TGG_PROTECT_MSK
;
881 if (bss_conf
->use_cts_prot
)
882 ctx
->staging
.flags
|= RXON_FLG_SELF_CTS_EN
;
884 ctx
->staging
.flags
&= ~RXON_FLG_SELF_CTS_EN
;
886 memcpy(ctx
->staging
.bssid_addr
, bss_conf
->bssid
, ETH_ALEN
);
888 if (vif
->type
== NL80211_IFTYPE_AP
||
889 vif
->type
== NL80211_IFTYPE_ADHOC
) {
890 if (vif
->bss_conf
.enable_beacon
) {
891 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
892 priv
->beacon_ctx
= ctx
;
894 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
895 priv
->beacon_ctx
= NULL
;
899 if (force
|| memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
900 iwlagn_commit_rxon(priv
, ctx
);
902 if (changes
& BSS_CHANGED_ASSOC
&& bss_conf
->assoc
) {
904 * The chain noise calibration will enable PM upon
905 * completion. If calibration has already been run
906 * then we need to enable power management here.
908 if (priv
->chain_noise_data
.state
== IWL_CHAIN_NOISE_DONE
)
909 iwl_power_update_mode(priv
, false);
911 /* Enable RX differential gain and sensitivity calibrations */
912 if (!priv
->disable_chain_noise_cal
)
913 iwlagn_chain_noise_reset(priv
);
914 priv
->start_calib
= 1;
917 if (changes
& BSS_CHANGED_IBSS
) {
918 ret
= iwlagn_manage_ibss_station(priv
, vif
,
919 bss_conf
->ibss_joined
);
921 IWL_ERR(priv
, "failed to %s IBSS station %pM\n",
922 bss_conf
->ibss_joined
? "add" : "remove",
926 if (changes
& BSS_CHANGED_BEACON
&& vif
->type
== NL80211_IFTYPE_ADHOC
&&
928 if (iwlagn_update_beacon(priv
, vif
))
929 IWL_ERR(priv
, "Error sending IBSS beacon\n");
932 mutex_unlock(&priv
->mutex
);
935 void iwlagn_post_scan(struct iwl_priv
*priv
)
937 struct iwl_rxon_context
*ctx
;
940 * We do not commit power settings while scan is pending,
941 * do it now if the settings changed.
943 iwl_power_set_mode(priv
, &priv
->power_data
.sleep_cmd_next
, false);
944 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
947 * Since setting the RXON may have been deferred while
948 * performing the scan, fire one off if needed
950 for_each_context(priv
, ctx
)
951 if (memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
952 iwlagn_commit_rxon(priv
, ctx
);
954 iwlagn_set_pan_params(priv
);