?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Add linux-next specific files for 20110421
[linux-2.6/next.git] / drivers / usb / musb / tusb6010.c
blobc47aac4a1f98415d19a91c56c8d6deb4ebf9aeff
1 /*
2 * TUSB6010 USB 2.0 OTG Dual Role controller
3 *
4 * Copyright (C) 2006 Nokia Corporation
5 * Tony Lindgren <tony@atomide.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Notes:
12 * - Driver assumes that interface to external host (main CPU) is
13 * configured for NOR FLASH interface instead of VLYNQ serial
14 * interface.
15 */
16
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/errno.h>
20 #include <linux/init.h>
21 #include <linux/usb.h>
22 #include <linux/irq.h>
23 #include <linux/platform_device.h>
24 #include <linux/dma-mapping.h>
25
26 #include "musb_core.h"
27
28 struct tusb6010_glue {
29 struct device *dev;
30 struct platform_device *musb;
31 };
32
33 static void tusb_musb_set_vbus(struct musb *musb, int is_on);
34
35 #define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
36 #define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
37
38 /*
39 * Checks the revision. We need to use the DMA register as 3.0 does not
40 * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
41 */
42 u8 tusb_get_revision(struct musb *musb)
43 {
44 void __iomem *tbase = musb->ctrl_base;
45 u32 die_id;
46 u8 rev;
47
48 rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
49 if (TUSB_REV_MAJOR(rev) == 3) {
50 die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
51 TUSB_DIDR1_HI));
52 if (die_id >= TUSB_DIDR1_HI_REV_31)
53 rev |= 1;
54 }
55
56 return rev;
57 }
58
59 static int tusb_print_revision(struct musb *musb)
60 {
61 void __iomem *tbase = musb->ctrl_base;
62 u8 rev;
63
64 rev = tusb_get_revision(musb);
65
66 pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
67 "prcm",
68 TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
69 TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
70 "int",
71 TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
72 TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
73 "gpio",
74 TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
75 TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
76 "dma",
77 TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
78 TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
79 "dieid",
80 TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
81 "rev",
82 TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
83
84 return tusb_get_revision(musb);
85 }
86
87 #define WBUS_QUIRK_MASK (TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
88 | TUSB_PHY_OTG_CTRL_TESTM0)
89
90 /*
91 * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
92 * Disables power detection in PHY for the duration of idle.
93 */
94 static void tusb_wbus_quirk(struct musb *musb, int enabled)
95 {
96 void __iomem *tbase = musb->ctrl_base;
97 static u32 phy_otg_ctrl, phy_otg_ena;
98 u32 tmp;
99
100 if (enabled) {
101 phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
102 phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
103 tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
104 | phy_otg_ena | WBUS_QUIRK_MASK;
105 musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
106 tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
107 tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
108 musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
109 DBG(2, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
110 musb_readl(tbase, TUSB_PHY_OTG_CTRL),
111 musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
112 } else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
113 & TUSB_PHY_OTG_CTRL_TESTM2) {
114 tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
115 musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
116 tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
117 musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
118 DBG(2, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
119 musb_readl(tbase, TUSB_PHY_OTG_CTRL),
120 musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
121 phy_otg_ctrl = 0;
122 phy_otg_ena = 0;
123 }
124 }
125
126 /*
127 * TUSB 6010 may use a parallel bus that doesn't support byte ops;
128 * so both loading and unloading FIFOs need explicit byte counts.
129 */
130
131 static inline void
132 tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
133 {
134 u32 val;
135 int i;
136
137 if (len > 4) {
138 for (i = 0; i < (len >> 2); i++) {
139 memcpy(&val, buf, 4);
140 musb_writel(fifo, 0, val);
141 buf += 4;
142 }
143 len %= 4;
144 }
145 if (len > 0) {
146 /* Write the rest 1 - 3 bytes to FIFO */
147 memcpy(&val, buf, len);
148 musb_writel(fifo, 0, val);
149 }
150 }
151
152 static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
153 void __iomem *buf, u16 len)
154 {
155 u32 val;
156 int i;
157
158 if (len > 4) {
159 for (i = 0; i < (len >> 2); i++) {
160 val = musb_readl(fifo, 0);
161 memcpy(buf, &val, 4);
162 buf += 4;
163 }
164 len %= 4;
165 }
166 if (len > 0) {
167 /* Read the rest 1 - 3 bytes from FIFO */
168 val = musb_readl(fifo, 0);
169 memcpy(buf, &val, len);
170 }
171 }
172
173 void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
174 {
175 void __iomem *ep_conf = hw_ep->conf;
176 void __iomem *fifo = hw_ep->fifo;
177 u8 epnum = hw_ep->epnum;
178
179 prefetch(buf);
180
181 DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
182 'T', epnum, fifo, len, buf);
183
184 if (epnum)
185 musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
186 TUSB_EP_CONFIG_XFR_SIZE(len));
187 else
188 musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
189 TUSB_EP0_CONFIG_XFR_SIZE(len));
190
191 if (likely((0x01 & (unsigned long) buf) == 0)) {
192
193 /* Best case is 32bit-aligned destination address */
194 if ((0x02 & (unsigned long) buf) == 0) {
195 if (len >= 4) {
196 writesl(fifo, buf, len >> 2);
197 buf += (len & ~0x03);
198 len &= 0x03;
199 }
200 } else {
201 if (len >= 2) {
202 u32 val;
203 int i;
204
205 /* Cannot use writesw, fifo is 32-bit */
206 for (i = 0; i < (len >> 2); i++) {
207 val = (u32)(*(u16 *)buf);
208 buf += 2;
209 val |= (*(u16 *)buf) << 16;
210 buf += 2;
211 musb_writel(fifo, 0, val);
212 }
213 len &= 0x03;
214 }
215 }
216 }
217
218 if (len > 0)
219 tusb_fifo_write_unaligned(fifo, buf, len);
220 }
221
222 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
223 {
224 void __iomem *ep_conf = hw_ep->conf;
225 void __iomem *fifo = hw_ep->fifo;
226 u8 epnum = hw_ep->epnum;
227
228 DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
229 'R', epnum, fifo, len, buf);
230
231 if (epnum)
232 musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
233 TUSB_EP_CONFIG_XFR_SIZE(len));
234 else
235 musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
236
237 if (likely((0x01 & (unsigned long) buf) == 0)) {
238
239 /* Best case is 32bit-aligned destination address */
240 if ((0x02 & (unsigned long) buf) == 0) {
241 if (len >= 4) {
242 readsl(fifo, buf, len >> 2);
243 buf += (len & ~0x03);
244 len &= 0x03;
245 }
246 } else {
247 if (len >= 2) {
248 u32 val;
249 int i;
250
251 /* Cannot use readsw, fifo is 32-bit */
252 for (i = 0; i < (len >> 2); i++) {
253 val = musb_readl(fifo, 0);
254 *(u16 *)buf = (u16)(val & 0xffff);
255 buf += 2;
256 *(u16 *)buf = (u16)(val >> 16);
257 buf += 2;
258 }
259 len &= 0x03;
260 }
261 }
262 }
263
264 if (len > 0)
265 tusb_fifo_read_unaligned(fifo, buf, len);
266 }
267
268 static struct musb *the_musb;
269
270 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
271
272 /* This is used by gadget drivers, and OTG transceiver logic, allowing
273 * at most mA current to be drawn from VBUS during a Default-B session
274 * (that is, while VBUS exceeds 4.4V). In Default-A (including pure host
275 * mode), or low power Default-B sessions, something else supplies power.
276 * Caller must take care of locking.
277 */
278 static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
279 {
280 struct musb *musb = the_musb;
281 void __iomem *tbase = musb->ctrl_base;
282 u32 reg;
283
284 /* tps65030 seems to consume max 100mA, with maybe 60mA available
285 * (measured on one board) for things other than tps and tusb.
286 *
287 * Boards sharing the CPU clock with CLKIN will need to prevent
288 * certain idle sleep states while the USB link is active.
289 *
290 * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
291 * The actual current usage would be very board-specific. For now,
292 * it's simpler to just use an aggregate (also board-specific).
293 */
294 if (x->default_a || mA < (musb->min_power << 1))
295 mA = 0;
296
297 reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
298 if (mA) {
299 musb->is_bus_powered = 1;
300 reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
301 } else {
302 musb->is_bus_powered = 0;
303 reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
304 }
305 musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
306
307 DBG(2, "draw max %d mA VBUS\n", mA);
308 return 0;
309 }
310
311 #else
312 #define tusb_draw_power NULL
313 #endif
314
315 /* workaround for issue 13: change clock during chip idle
316 * (to be fixed in rev3 silicon) ... symptoms include disconnect
317 * or looping suspend/resume cycles
318 */
319 static void tusb_set_clock_source(struct musb *musb, unsigned mode)
320 {
321 void __iomem *tbase = musb->ctrl_base;
322 u32 reg;
323
324 reg = musb_readl(tbase, TUSB_PRCM_CONF);
325 reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
326
327 /* 0 = refclk (clkin, XI)
328 * 1 = PHY 60 MHz (internal PLL)
329 * 2 = not supported
330 * 3 = what?
331 */
332 if (mode > 0)
333 reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
334
335 musb_writel(tbase, TUSB_PRCM_CONF, reg);
336
337 /* FIXME tusb6010_platform_retime(mode == 0); */
338 }
339
340 /*
341 * Idle TUSB6010 until next wake-up event; NOR access always wakes.
342 * Other code ensures that we idle unless we're connected _and_ the
343 * USB link is not suspended ... and tells us the relevant wakeup
344 * events. SW_EN for voltage is handled separately.
345 */
346 static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
347 {
348 void __iomem *tbase = musb->ctrl_base;
349 u32 reg;
350
351 if ((wakeup_enables & TUSB_PRCM_WBUS)
352 && (tusb_get_revision(musb) == TUSB_REV_30))
353 tusb_wbus_quirk(musb, 1);
354
355 tusb_set_clock_source(musb, 0);
356
357 wakeup_enables |= TUSB_PRCM_WNORCS;
358 musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
359
360 /* REVISIT writeup of WID implies that if WID set and ID is grounded,
361 * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
362 * Presumably that's mostly to save power, hence WID is immaterial ...
363 */
364
365 reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
366 /* issue 4: when driving vbus, use hipower (vbus_det) comparator */
367 if (is_host_active(musb)) {
368 reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
369 reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
370 } else {
371 reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
372 reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
373 }
374 reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
375 musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
376
377 DBG(6, "idle, wake on %02x\n", wakeup_enables);
378 }
379
380 /*
381 * Updates cable VBUS status. Caller must take care of locking.
382 */
383 static int tusb_musb_vbus_status(struct musb *musb)
384 {
385 void __iomem *tbase = musb->ctrl_base;
386 u32 otg_stat, prcm_mngmt;
387 int ret = 0;
388
389 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
390 prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
391
392 /* Temporarily enable VBUS detection if it was disabled for
393 * suspend mode. Unless it's enabled otg_stat and devctl will
394 * not show correct VBUS state.
395 */
396 if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
397 u32 tmp = prcm_mngmt;
398 tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
399 musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
400 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
401 musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
402 }
403
404 if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
405 ret = 1;
406
407 return ret;
408 }
409
410 static struct timer_list musb_idle_timer;
411
412 static void musb_do_idle(unsigned long _musb)
413 {
414 struct musb *musb = (void *)_musb;
415 unsigned long flags;
416
417 spin_lock_irqsave(&musb->lock, flags);
418
419 switch (musb->xceiv->state) {
420 case OTG_STATE_A_WAIT_BCON:
421 if ((musb->a_wait_bcon != 0)
422 && (musb->idle_timeout == 0
423 || time_after(jiffies, musb->idle_timeout))) {
424 DBG(4, "Nothing connected %s, turning off VBUS\n",
425 otg_state_string(musb));
426 }
427 /* FALLTHROUGH */
428 case OTG_STATE_A_IDLE:
429 tusb_musb_set_vbus(musb, 0);
430 default:
431 break;
432 }
433
434 if (!musb->is_active) {
435 u32 wakeups;
436
437 /* wait until khubd handles port change status */
438 if (is_host_active(musb) && (musb->port1_status >> 16))
439 goto done;
440
441 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
442 if (is_peripheral_enabled(musb) && !musb->gadget_driver)
443 wakeups = 0;
444 else {
445 wakeups = TUSB_PRCM_WHOSTDISCON
446 | TUSB_PRCM_WBUS
447 | TUSB_PRCM_WVBUS;
448 if (is_otg_enabled(musb))
449 wakeups |= TUSB_PRCM_WID;
450 }
451 #else
452 wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
453 #endif
454 tusb_allow_idle(musb, wakeups);
455 }
456 done:
457 spin_unlock_irqrestore(&musb->lock, flags);
458 }
459
460 /*
461 * Maybe put TUSB6010 into idle mode mode depending on USB link status,
462 * like "disconnected" or "suspended". We'll be woken out of it by
463 * connect, resume, or disconnect.
464 *
465 * Needs to be called as the last function everywhere where there is
466 * register access to TUSB6010 because of NOR flash wake-up.
467 * Caller should own controller spinlock.
468 *
469 * Delay because peripheral enables D+ pullup 3msec after SE0, and
470 * we don't want to treat that full speed J as a wakeup event.
471 * ... peripherals must draw only suspend current after 10 msec.
472 */
473 static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
474 {
475 unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
476 static unsigned long last_timer;
477
478 if (timeout == 0)
479 timeout = default_timeout;
480
481 /* Never idle if active, or when VBUS timeout is not set as host */
482 if (musb->is_active || ((musb->a_wait_bcon == 0)
483 && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
484 DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
485 del_timer(&musb_idle_timer);
486 last_timer = jiffies;
487 return;
488 }
489
490 if (time_after(last_timer, timeout)) {
491 if (!timer_pending(&musb_idle_timer))
492 last_timer = timeout;
493 else {
494 DBG(4, "Longer idle timer already pending, ignoring\n");
495 return;
496 }
497 }
498 last_timer = timeout;
499
500 DBG(4, "%s inactive, for idle timer for %lu ms\n",
501 otg_state_string(musb),
502 (unsigned long)jiffies_to_msecs(timeout - jiffies));
503 mod_timer(&musb_idle_timer, timeout);
504 }
505
506 /* ticks of 60 MHz clock */
507 #define DEVCLOCK 60000000
508 #define OTG_TIMER_MS(msecs) ((msecs) \
509 ? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
510 | TUSB_DEV_OTG_TIMER_ENABLE) \
511 : 0)
512
513 static void tusb_musb_set_vbus(struct musb *musb, int is_on)
514 {
515 void __iomem *tbase = musb->ctrl_base;
516 u32 conf, prcm, timer;
517 u8 devctl;
518
519 /* HDRC controls CPEN, but beware current surges during device
520 * connect. They can trigger transient overcurrent conditions
521 * that must be ignored.
522 */
523
524 prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
525 conf = musb_readl(tbase, TUSB_DEV_CONF);
526 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
527
528 if (is_on) {
529 timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
530 musb->xceiv->default_a = 1;
531 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
532 devctl |= MUSB_DEVCTL_SESSION;
533
534 conf |= TUSB_DEV_CONF_USB_HOST_MODE;
535 MUSB_HST_MODE(musb);
536 } else {
537 u32 otg_stat;
538
539 timer = 0;
540
541 /* If ID pin is grounded, we want to be a_idle */
542 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
543 if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
544 switch (musb->xceiv->state) {
545 case OTG_STATE_A_WAIT_VRISE:
546 case OTG_STATE_A_WAIT_BCON:
547 musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
548 break;
549 case OTG_STATE_A_WAIT_VFALL:
550 musb->xceiv->state = OTG_STATE_A_IDLE;
551 break;
552 default:
553 musb->xceiv->state = OTG_STATE_A_IDLE;
554 }
555 musb->is_active = 0;
556 musb->xceiv->default_a = 1;
557 MUSB_HST_MODE(musb);
558 } else {
559 musb->is_active = 0;
560 musb->xceiv->default_a = 0;
561 musb->xceiv->state = OTG_STATE_B_IDLE;
562 MUSB_DEV_MODE(musb);
563 }
564
565 devctl &= ~MUSB_DEVCTL_SESSION;
566 conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
567 }
568 prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
569
570 musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
571 musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
572 musb_writel(tbase, TUSB_DEV_CONF, conf);
573 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
574
575 DBG(1, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
576 otg_state_string(musb),
577 musb_readb(musb->mregs, MUSB_DEVCTL),
578 musb_readl(tbase, TUSB_DEV_OTG_STAT),
579 conf, prcm);
580 }
581
582 /*
583 * Sets the mode to OTG, peripheral or host by changing the ID detection.
584 * Caller must take care of locking.
585 *
586 * Note that if a mini-A cable is plugged in the ID line will stay down as
587 * the weak ID pull-up is not able to pull the ID up.
588 *
589 * REVISIT: It would be possible to add support for changing between host
590 * and peripheral modes in non-OTG configurations by reconfiguring hardware
591 * and then setting musb->board_mode. For now, only support OTG mode.
592 */
593 static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
594 {
595 void __iomem *tbase = musb->ctrl_base;
596 u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
597
598 if (musb->board_mode != MUSB_OTG) {
599 ERR("Changing mode currently only supported in OTG mode\n");
600 return -EINVAL;
601 }
602
603 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
604 phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
605 phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
606 dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
607
608 switch (musb_mode) {
609
610 #ifdef CONFIG_USB_MUSB_HDRC_HCD
611 case MUSB_HOST: /* Disable PHY ID detect, ground ID */
612 phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
613 phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
614 dev_conf |= TUSB_DEV_CONF_ID_SEL;
615 dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
616 break;
617 #endif
618
619 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
620 case MUSB_PERIPHERAL: /* Disable PHY ID detect, keep ID pull-up on */
621 phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
622 phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
623 dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
624 break;
625 #endif
626
627 #ifdef CONFIG_USB_MUSB_OTG
628 case MUSB_OTG: /* Use PHY ID detection */
629 phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
630 phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
631 dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
632 break;
633 #endif
634
635 default:
636 DBG(2, "Trying to set mode %i\n", musb_mode);
637 return -EINVAL;
638 }
639
640 musb_writel(tbase, TUSB_PHY_OTG_CTRL,
641 TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
642 musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
643 TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
644 musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
645
646 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
647 if ((musb_mode == MUSB_PERIPHERAL) &&
648 !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
649 INFO("Cannot be peripheral with mini-A cable "
650 "otg_stat: %08x\n", otg_stat);
651
652 return 0;
653 }
654
655 static inline unsigned long
656 tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
657 {
658 u32 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
659 unsigned long idle_timeout = 0;
660
661 /* ID pin */
662 if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
663 int default_a;
664
665 if (is_otg_enabled(musb))
666 default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
667 else
668 default_a = is_host_enabled(musb);
669 DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
670 musb->xceiv->default_a = default_a;
671 tusb_musb_set_vbus(musb, default_a);
672
673 /* Don't allow idling immediately */
674 if (default_a)
675 idle_timeout = jiffies + (HZ * 3);
676 }
677
678 /* VBUS state change */
679 if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
680
681 /* B-dev state machine: no vbus ~= disconnect */
682 if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
683 || !is_host_enabled(musb)) {
684 #ifdef CONFIG_USB_MUSB_HDRC_HCD
685 /* ? musb_root_disconnect(musb); */
686 musb->port1_status &=
687 ~(USB_PORT_STAT_CONNECTION
688 | USB_PORT_STAT_ENABLE
689 | USB_PORT_STAT_LOW_SPEED
690 | USB_PORT_STAT_HIGH_SPEED
691 | USB_PORT_STAT_TEST
692 );
693 #endif
694
695 if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
696 DBG(1, "Forcing disconnect (no interrupt)\n");
697 if (musb->xceiv->state != OTG_STATE_B_IDLE) {
698 /* INTR_DISCONNECT can hide... */
699 musb->xceiv->state = OTG_STATE_B_IDLE;
700 musb->int_usb |= MUSB_INTR_DISCONNECT;
701 }
702 musb->is_active = 0;
703 }
704 DBG(2, "vbus change, %s, otg %03x\n",
705 otg_state_string(musb), otg_stat);
706 idle_timeout = jiffies + (1 * HZ);
707 schedule_work(&musb->irq_work);
708
709 } else /* A-dev state machine */ {
710 DBG(2, "vbus change, %s, otg %03x\n",
711 otg_state_string(musb), otg_stat);
712
713 switch (musb->xceiv->state) {
714 case OTG_STATE_A_IDLE:
715 DBG(2, "Got SRP, turning on VBUS\n");
716 musb_platform_set_vbus(musb, 1);
717
718 /* CONNECT can wake if a_wait_bcon is set */
719 if (musb->a_wait_bcon != 0)
720 musb->is_active = 0;
721 else
722 musb->is_active = 1;
723
724 /*
725 * OPT FS A TD.4.6 needs few seconds for
726 * A_WAIT_VRISE
727 */
728 idle_timeout = jiffies + (2 * HZ);
729
730 break;
731 case OTG_STATE_A_WAIT_VRISE:
732 /* ignore; A-session-valid < VBUS_VALID/2,
733 * we monitor this with the timer
734 */
735 break;
736 case OTG_STATE_A_WAIT_VFALL:
737 /* REVISIT this irq triggers during short
738 * spikes caused by enumeration ...
739 */
740 if (musb->vbuserr_retry) {
741 musb->vbuserr_retry--;
742 tusb_musb_set_vbus(musb, 1);
743 } else {
744 musb->vbuserr_retry
745 = VBUSERR_RETRY_COUNT;
746 tusb_musb_set_vbus(musb, 0);
747 }
748 break;
749 default:
750 break;
751 }
752 }
753 }
754
755 /* OTG timer expiration */
756 if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
757 u8 devctl;
758
759 DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
760
761 switch (musb->xceiv->state) {
762 case OTG_STATE_A_WAIT_VRISE:
763 /* VBUS has probably been valid for a while now,
764 * but may well have bounced out of range a bit
765 */
766 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
767 if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
768 if ((devctl & MUSB_DEVCTL_VBUS)
769 != MUSB_DEVCTL_VBUS) {
770 DBG(2, "devctl %02x\n", devctl);
771 break;
772 }
773 musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
774 musb->is_active = 0;
775 idle_timeout = jiffies
776 + msecs_to_jiffies(musb->a_wait_bcon);
777 } else {
778 /* REVISIT report overcurrent to hub? */
779 ERR("vbus too slow, devctl %02x\n", devctl);
780 tusb_musb_set_vbus(musb, 0);
781 }
782 break;
783 case OTG_STATE_A_WAIT_BCON:
784 if (musb->a_wait_bcon != 0)
785 idle_timeout = jiffies
786 + msecs_to_jiffies(musb->a_wait_bcon);
787 break;
788 case OTG_STATE_A_SUSPEND:
789 break;
790 case OTG_STATE_B_WAIT_ACON:
791 break;
792 default:
793 break;
794 }
795 }
796 schedule_work(&musb->irq_work);
797
798 return idle_timeout;
799 }
800
801 static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
802 {
803 struct musb *musb = __hci;
804 void __iomem *tbase = musb->ctrl_base;
805 unsigned long flags, idle_timeout = 0;
806 u32 int_mask, int_src;
807
808 spin_lock_irqsave(&musb->lock, flags);
809
810 /* Mask all interrupts to allow using both edge and level GPIO irq */
811 int_mask = musb_readl(tbase, TUSB_INT_MASK);
812 musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
813
814 int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
815 DBG(3, "TUSB IRQ %08x\n", int_src);
816
817 musb->int_usb = (u8) int_src;
818
819 /* Acknowledge wake-up source interrupts */
820 if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
821 u32 reg;
822 u32 i;
823
824 if (tusb_get_revision(musb) == TUSB_REV_30)
825 tusb_wbus_quirk(musb, 0);
826
827 /* there are issues re-locking the PLL on wakeup ... */
828
829 /* work around issue 8 */
830 for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
831 musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
832 musb_writel(tbase, TUSB_SCRATCH_PAD, i);
833 reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
834 if (reg == i)
835 break;
836 DBG(6, "TUSB NOR not ready\n");
837 }
838
839 /* work around issue 13 (2nd half) */
840 tusb_set_clock_source(musb, 1);
841
842 reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
843 musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
844 if (reg & ~TUSB_PRCM_WNORCS) {
845 musb->is_active = 1;
846 schedule_work(&musb->irq_work);
847 }
848 DBG(3, "wake %sactive %02x\n",
849 musb->is_active ? "" : "in", reg);
850
851 /* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
852 }
853
854 if (int_src & TUSB_INT_SRC_USB_IP_CONN)
855 del_timer(&musb_idle_timer);
856
857 /* OTG state change reports (annoyingly) not issued by Mentor core */
858 if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
859 | TUSB_INT_SRC_OTG_TIMEOUT
860 | TUSB_INT_SRC_ID_STATUS_CHNG))
861 idle_timeout = tusb_otg_ints(musb, int_src, tbase);
862
863 /* TX dma callback must be handled here, RX dma callback is
864 * handled in tusb_omap_dma_cb.
865 */
866 if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
867 u32 dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
868 u32 real_dma_src = musb_readl(tbase, TUSB_DMA_INT_MASK);
869
870 DBG(3, "DMA IRQ %08x\n", dma_src);
871 real_dma_src = ~real_dma_src & dma_src;
872 if (tusb_dma_omap() && real_dma_src) {
873 int tx_source = (real_dma_src & 0xffff);
874 int i;
875
876 for (i = 1; i <= 15; i++) {
877 if (tx_source & (1 << i)) {
878 DBG(3, "completing ep%i %s\n", i, "tx");
879 musb_dma_completion(musb, i, 1);
880 }
881 }
882 }
883 musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
884 }
885
886 /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
887 if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
888 u32 musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
889
890 musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
891 musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
892 musb->int_tx = (musb_src & 0xffff);
893 } else {
894 musb->int_rx = 0;
895 musb->int_tx = 0;
896 }
897
898 if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
899 musb_interrupt(musb);
900
901 /* Acknowledge TUSB interrupts. Clear only non-reserved bits */
902 musb_writel(tbase, TUSB_INT_SRC_CLEAR,
903 int_src & ~TUSB_INT_MASK_RESERVED_BITS);
904
905 tusb_musb_try_idle(musb, idle_timeout);
906
907 musb_writel(tbase, TUSB_INT_MASK, int_mask);
908 spin_unlock_irqrestore(&musb->lock, flags);
909
910 return IRQ_HANDLED;
911 }
912
913 static int dma_off;
914
915 /*
916 * Enables TUSB6010. Caller must take care of locking.
917 * REVISIT:
918 * - Check what is unnecessary in MGC_HdrcStart()
919 */
920 static void tusb_musb_enable(struct musb *musb)
921 {
922 void __iomem *tbase = musb->ctrl_base;
923
924 /* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
925 * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
926 musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
927
928 /* Setup TUSB interrupt, disable DMA and GPIO interrupts */
929 musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
930 musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
931 musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
932
933 /* Clear all subsystem interrups */
934 musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
935 musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
936 musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
937
938 /* Acknowledge pending interrupt(s) */
939 musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
940
941 /* Only 0 clock cycles for minimum interrupt de-assertion time and
942 * interrupt polarity active low seems to work reliably here */
943 musb_writel(tbase, TUSB_INT_CTRL_CONF,
944 TUSB_INT_CTRL_CONF_INT_RELCYC(0));
945
946 irq_set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
947
948 /* maybe force into the Default-A OTG state machine */
949 if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
950 & TUSB_DEV_OTG_STAT_ID_STATUS))
951 musb_writel(tbase, TUSB_INT_SRC_SET,
952 TUSB_INT_SRC_ID_STATUS_CHNG);
953
954 if (is_dma_capable() && dma_off)
955 printk(KERN_WARNING "%s %s: dma not reactivated\n",
956 __FILE__, __func__);
957 else
958 dma_off = 1;
959 }
960
961 /*
962 * Disables TUSB6010. Caller must take care of locking.
963 */
964 static void tusb_musb_disable(struct musb *musb)
965 {
966 void __iomem *tbase = musb->ctrl_base;
967
968 /* FIXME stop DMA, IRQs, timers, ... */
969
970 /* disable all IRQs */
971 musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
972 musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
973 musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
974 musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
975
976 del_timer(&musb_idle_timer);
977
978 if (is_dma_capable() && !dma_off) {
979 printk(KERN_WARNING "%s %s: dma still active\n",
980 __FILE__, __func__);
981 dma_off = 1;
982 }
983 }
984
985 /*
986 * Sets up TUSB6010 CPU interface specific signals and registers
987 * Note: Settings optimized for OMAP24xx
988 */
989 static void tusb_setup_cpu_interface(struct musb *musb)
990 {
991 void __iomem *tbase = musb->ctrl_base;
992
993 /*
994 * Disable GPIO[5:0] pullups (used as output DMA requests)
995 * Don't disable GPIO[7:6] as they are needed for wake-up.
996 */
997 musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
998
999 /* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
1000 musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
1001
1002 /* Turn GPIO[5:0] to DMAREQ[5:0] signals */
1003 musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
1004
1005 /* Burst size 16x16 bits, all six DMA requests enabled, DMA request
1006 * de-assertion time 2 system clocks p 62 */
1007 musb_writel(tbase, TUSB_DMA_REQ_CONF,
1008 TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
1009 TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
1010 TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
1011
1012 /* Set 0 wait count for synchronous burst access */
1013 musb_writel(tbase, TUSB_WAIT_COUNT, 1);
1014 }
1015
1016 static int tusb_musb_start(struct musb *musb)
1017 {
1018 void __iomem *tbase = musb->ctrl_base;
1019 int ret = 0;
1020 unsigned long flags;
1021 u32 reg;
1022
1023 if (musb->board_set_power)
1024 ret = musb->board_set_power(1);
1025 if (ret != 0) {
1026 printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
1027 return ret;
1028 }
1029
1030 spin_lock_irqsave(&musb->lock, flags);
1031
1032 if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
1033 TUSB_PROD_TEST_RESET_VAL) {
1034 printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
1035 goto err;
1036 }
1037
1038 ret = tusb_print_revision(musb);
1039 if (ret < 2) {
1040 printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
1041 ret);
1042 goto err;
1043 }
1044
1045 /* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
1046 * NOR FLASH interface is used */
1047 musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
1048
1049 /* Select PHY free running 60MHz as a system clock */
1050 tusb_set_clock_source(musb, 1);
1051
1052 /* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
1053 * power saving, enable VBus detect and session end comparators,
1054 * enable IDpullup, enable VBus charging */
1055 musb_writel(tbase, TUSB_PRCM_MNGMT,
1056 TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
1057 TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
1058 TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
1059 TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
1060 TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
1061 tusb_setup_cpu_interface(musb);
1062
1063 /* simplify: always sense/pullup ID pins, as if in OTG mode */
1064 reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
1065 reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
1066 musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
1067
1068 reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
1069 reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
1070 musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
1071
1072 spin_unlock_irqrestore(&musb->lock, flags);
1073
1074 return 0;
1075
1076 err:
1077 spin_unlock_irqrestore(&musb->lock, flags);
1078
1079 if (musb->board_set_power)
1080 musb->board_set_power(0);
1081
1082 return -ENODEV;
1083 }
1084
1085 static int tusb_musb_init(struct musb *musb)
1086 {
1087 struct platform_device *pdev;
1088 struct resource *mem;
1089 void __iomem *sync = NULL;
1090 int ret;
1091
1092 usb_nop_xceiv_register();
1093 musb->xceiv = otg_get_transceiver();
1094 if (!musb->xceiv)
1095 return -ENODEV;
1096
1097 pdev = to_platform_device(musb->controller);
1098
1099 /* dma address for async dma */
1100 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1101 musb->async = mem->start;
1102
1103 /* dma address for sync dma */
1104 mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
1105 if (!mem) {
1106 pr_debug("no sync dma resource?\n");
1107 ret = -ENODEV;
1108 goto done;
1109 }
1110 musb->sync = mem->start;
1111
1112 sync = ioremap(mem->start, resource_size(mem));
1113 if (!sync) {
1114 pr_debug("ioremap for sync failed\n");
1115 ret = -ENOMEM;
1116 goto done;
1117 }
1118 musb->sync_va = sync;
1119
1120 /* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
1121 * FIFOs at 0x600, TUSB at 0x800
1122 */
1123 musb->mregs += TUSB_BASE_OFFSET;
1124
1125 ret = tusb_musb_start(musb);
1126 if (ret) {
1127 printk(KERN_ERR "Could not start tusb6010 (%d)\n",
1128 ret);
1129 goto done;
1130 }
1131 musb->isr = tusb_musb_interrupt;
1132
1133 if (is_peripheral_enabled(musb)) {
1134 musb->xceiv->set_power = tusb_draw_power;
1135 the_musb = musb;
1136 }
1137
1138 setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
1139
1140 done:
1141 if (ret < 0) {
1142 if (sync)
1143 iounmap(sync);
1144
1145 otg_put_transceiver(musb->xceiv);
1146 usb_nop_xceiv_unregister();
1147 }
1148 return ret;
1149 }
1150
1151 static int tusb_musb_exit(struct musb *musb)
1152 {
1153 del_timer_sync(&musb_idle_timer);
1154 the_musb = NULL;
1155
1156 if (musb->board_set_power)
1157 musb->board_set_power(0);
1158
1159 iounmap(musb->sync_va);
1160
1161 otg_put_transceiver(musb->xceiv);
1162 usb_nop_xceiv_unregister();
1163 return 0;
1164 }
1165
1166 static const struct musb_platform_ops tusb_ops = {
1167 .init = tusb_musb_init,
1168 .exit = tusb_musb_exit,
1169
1170 .enable = tusb_musb_enable,
1171 .disable = tusb_musb_disable,
1172
1173 .set_mode = tusb_musb_set_mode,
1174 .try_idle = tusb_musb_try_idle,
1175
1176 .vbus_status = tusb_musb_vbus_status,
1177 .set_vbus = tusb_musb_set_vbus,
1178 };
1179
1180 static u64 tusb_dmamask = DMA_BIT_MASK(32);
1181
1182 static int __init tusb_probe(struct platform_device *pdev)
1183 {
1184 struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
1185 struct platform_device *musb;
1186 struct tusb6010_glue *glue;
1187
1188 int ret = -ENOMEM;
1189
1190 glue = kzalloc(sizeof(*glue), GFP_KERNEL);
1191 if (!glue) {
1192 dev_err(&pdev->dev, "failed to allocate glue context\n");
1193 goto err0;
1194 }
1195
1196 musb = platform_device_alloc("musb-hdrc", -1);
1197 if (!musb) {
1198 dev_err(&pdev->dev, "failed to allocate musb device\n");
1199 goto err1;
1200 }
1201
1202 musb->dev.parent = &pdev->dev;
1203 musb->dev.dma_mask = &tusb_dmamask;
1204 musb->dev.coherent_dma_mask = tusb_dmamask;
1205
1206 glue->dev = &pdev->dev;
1207 glue->musb = musb;
1208
1209 pdata->platform_ops = &tusb_ops;
1210
1211 platform_set_drvdata(pdev, glue);
1212
1213 ret = platform_device_add_resources(musb, pdev->resource,
1214 pdev->num_resources);
1215 if (ret) {
1216 dev_err(&pdev->dev, "failed to add resources\n");
1217 goto err2;
1218 }
1219
1220 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
1221 if (ret) {
1222 dev_err(&pdev->dev, "failed to add platform_data\n");
1223 goto err2;
1224 }
1225
1226 ret = platform_device_add(musb);
1227 if (ret) {
1228 dev_err(&pdev->dev, "failed to register musb device\n");
1229 goto err1;
1230 }
1231
1232 return 0;
1233
1234 err2:
1235 platform_device_put(musb);
1236
1237 err1:
1238 kfree(glue);
1239
1240 err0:
1241 return ret;
1242 }
1243
1244 static int __exit tusb_remove(struct platform_device *pdev)
1245 {
1246 struct tusb6010_glue *glue = platform_get_drvdata(pdev);
1247
1248 platform_device_del(glue->musb);
1249 platform_device_put(glue->musb);
1250 kfree(glue);
1251
1252 return 0;
1253 }
1254
1255 static struct platform_driver tusb_driver = {
1256 .remove = __exit_p(tusb_remove),
1257 .driver = {
1258 .name = "musb-tusb",
1259 },
1260 };
1261
1262 MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
1263 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
1264 MODULE_LICENSE("GPL v2");
1265
1266 static int __init tusb_init(void)
1267 {
1268 return platform_driver_probe(&tusb_driver, tusb_probe);
1269 }
1270 subsys_initcall(tusb_init);
1271
1272 static void __exit tusb_exit(void)
1273 {
1274 platform_driver_unregister(&tusb_driver);
1275 }
1276 module_exit(tusb_exit);
linux-next