drivers/mmc/host/sdhci-pxav3.c

   1 /*
   2  * Copyright (C) 2010 Marvell International Ltd.
   3  *              Zhangfei Gao <zhangfei.gao@marvell.com>
   4  *              Kevin Wang <dwang4@marvell.com>
   5  *              Mingwei Wang <mwwang@marvell.com>
   6  *              Philip Rakity <prakity@marvell.com>
   7  *              Mark Brown <markb@marvell.com>
   8  *
   9  * This software is licensed under the terms of the GNU General Public
  10  * License version 2, as published by the Free Software Foundation, and
  11  * may be copied, distributed, and modified under those terms.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  */
  19 #include <linux/err.h>
  20 #include <linux/init.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/clk.h>
  23 #include <linux/io.h>
  24 #include <linux/gpio.h>
  25 #include <linux/mmc/card.h>
  26 #include <linux/mmc/host.h>
  27 #include <linux/platform_data/pxa_sdhci.h>
  28 #include <linux/slab.h>
  29 #include <linux/delay.h>
  30 #include <linux/module.h>
  31 #include "sdhci.h"
  32 #include "sdhci-pltfm.h"
  33
  34 #define SD_CLOCK_BURST_SIZE_SETUP               0x10A
  35 #define SDCLK_SEL       0x100
  36 #define SDCLK_DELAY_SHIFT       9
  37 #define SDCLK_DELAY_MASK        0x1f
  38
  39 #define SD_CFG_FIFO_PARAM       0x100
  40 #define SDCFG_GEN_PAD_CLK_ON    (1<<6)
  41 #define SDCFG_GEN_PAD_CLK_CNT_MASK      0xFF
  42 #define SDCFG_GEN_PAD_CLK_CNT_SHIFT     24
  43
  44 #define SD_SPI_MODE          0x108
  45 #define SD_CE_ATA_1          0x10C
  46
  47 #define SD_CE_ATA_2          0x10E
  48 #define SDCE_MISC_INT           (1<<2)
  49 #define SDCE_MISC_INT_EN        (1<<1)
  50
  51 static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask)
  52 {
  53         struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
  54         struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
  55
  56         if (mask == SDHCI_RESET_ALL) {
  57                 /*
  58                  * tune timing of read data/command when crc error happen
  59                  * no performance impact
  60                  */
  61                 if (pdata && 0 != pdata->clk_delay_cycles) {
  62                         u16 tmp;
  63
  64                         tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
  65                         tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
  66                                 << SDCLK_DELAY_SHIFT;
  67                         tmp |= SDCLK_SEL;
  68                         writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
  69                 }
  70         }
  71 }
  72
  73 #define MAX_WAIT_COUNT 5
  74 static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
  75 {
  76         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  77         struct sdhci_pxa *pxa = pltfm_host->priv;
  78         u16 tmp;
  79         int count;
  80
  81         if (pxa->power_mode == MMC_POWER_UP
  82                         && power_mode == MMC_POWER_ON) {
  83
  84                 dev_dbg(mmc_dev(host->mmc),
  85                                 "%s: slot->power_mode = %d,"
  86                                 "ios->power_mode = %d\n",
  87                                 __func__,
  88                                 pxa->power_mode,
  89                                 power_mode);
  90
  91                 /* set we want notice of when 74 clocks are sent */
  92                 tmp = readw(host->ioaddr + SD_CE_ATA_2);
  93                 tmp |= SDCE_MISC_INT_EN;
  94                 writew(tmp, host->ioaddr + SD_CE_ATA_2);
  95
  96                 /* start sending the 74 clocks */
  97                 tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
  98                 tmp |= SDCFG_GEN_PAD_CLK_ON;
  99                 writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
 100
 101                 /* slowest speed is about 100KHz or 10usec per clock */
 102                 udelay(740);
 103                 count = 0;
 104
 105                 while (count++ < MAX_WAIT_COUNT) {
 106                         if ((readw(host->ioaddr + SD_CE_ATA_2)
 107                                                 & SDCE_MISC_INT) == 0)
 108                                 break;
 109                         udelay(10);
 110                 }
 111
 112                 if (count == MAX_WAIT_COUNT)
 113                         dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
 114
 115                 /* clear the interrupt bit if posted */
 116                 tmp = readw(host->ioaddr + SD_CE_ATA_2);
 117                 tmp |= SDCE_MISC_INT;
 118                 writew(tmp, host->ioaddr + SD_CE_ATA_2);
 119         }
 120         pxa->power_mode = power_mode;
 121 }
 122
 123 static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 124 {
 125         u16 ctrl_2;
 126
 127         /*
 128          * Set V18_EN -- UHS modes do not work without this.
 129          * does not change signaling voltage
 130          */
 131         ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 132
 133         /* Select Bus Speed Mode for host */
 134         ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
 135         switch (uhs) {
 136         case MMC_TIMING_UHS_SDR12:
 137                 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
 138                 break;
 139         case MMC_TIMING_UHS_SDR25:
 140                 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
 141                 break;
 142         case MMC_TIMING_UHS_SDR50:
 143                 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
 144                 break;
 145         case MMC_TIMING_UHS_SDR104:
 146                 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
 147                 break;
 148         case MMC_TIMING_UHS_DDR50:
 149                 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
 150                 break;
 151         }
 152
 153         sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
 154         dev_dbg(mmc_dev(host->mmc),
 155                 "%s uhs = %d, ctrl_2 = %04X\n",
 156                 __func__, uhs, ctrl_2);
 157
 158         return 0;
 159 }
 160
 161 static struct sdhci_ops pxav3_sdhci_ops = {
 162         .platform_reset_exit = pxav3_set_private_registers,
 163         .set_uhs_signaling = pxav3_set_uhs_signaling,
 164         .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 165 };
 166
 167 static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 168 {
 169         struct sdhci_pltfm_host *pltfm_host;
 170         struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 171         struct device *dev = &pdev->dev;
 172         struct sdhci_host *host = NULL;
 173         struct sdhci_pxa *pxa = NULL;
 174         int ret;
 175         struct clk *clk;
 176
 177         pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
 178         if (!pxa)
 179                 return -ENOMEM;
 180
 181         host = sdhci_pltfm_init(pdev, NULL);
 182         if (IS_ERR(host)) {
 183                 kfree(pxa);
 184                 return PTR_ERR(host);
 185         }
 186         pltfm_host = sdhci_priv(host);
 187         pltfm_host->priv = pxa;
 188
 189         clk = clk_get(dev, "PXA-SDHCLK");
 190         if (IS_ERR(clk)) {
 191                 dev_err(dev, "failed to get io clock\n");
 192                 ret = PTR_ERR(clk);
 193                 goto err_clk_get;
 194         }
 195         pltfm_host->clk = clk;
 196         clk_enable(clk);
 197
 198         host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
 199                 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
 200                 | SDHCI_QUIRK_32BIT_ADMA_SIZE;
 201
 202         /* enable 1/8V DDR capable */
 203         host->mmc->caps |= MMC_CAP_1_8V_DDR;
 204
 205         if (pdata) {
 206                 if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
 207                         /* on-chip device */
 208                         host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 209                         host->mmc->caps |= MMC_CAP_NONREMOVABLE;
 210                 }
 211
 212                 /* If slot design supports 8 bit data, indicate this to MMC. */
 213                 if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
 214                         host->mmc->caps |= MMC_CAP_8_BIT_DATA;
 215
 216                 if (pdata->quirks)
 217                         host->quirks |= pdata->quirks;
 218                 if (pdata->host_caps)
 219                         host->mmc->caps |= pdata->host_caps;
 220                 if (pdata->pm_caps)
 221                         host->mmc->pm_caps |= pdata->pm_caps;
 222         }
 223
 224         host->ops = &pxav3_sdhci_ops;
 225
 226         ret = sdhci_add_host(host);
 227         if (ret) {
 228                 dev_err(&pdev->dev, "failed to add host\n");
 229                 goto err_add_host;
 230         }
 231
 232         platform_set_drvdata(pdev, host);
 233
 234         return 0;
 235
 236 err_add_host:
 237         clk_disable(clk);
 238         clk_put(clk);
 239 err_clk_get:
 240         sdhci_pltfm_free(pdev);
 241         kfree(pxa);
 242         return ret;
 243 }
 244
 245 static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
 246 {
 247         struct sdhci_host *host = platform_get_drvdata(pdev);
 248         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 249         struct sdhci_pxa *pxa = pltfm_host->priv;
 250
 251         sdhci_remove_host(host, 1);
 252
 253         clk_disable(pltfm_host->clk);
 254         clk_put(pltfm_host->clk);
 255         sdhci_pltfm_free(pdev);
 256         kfree(pxa);
 257
 258         platform_set_drvdata(pdev, NULL);
 259
 260         return 0;
 261 }
 262
 263 static struct platform_driver sdhci_pxav3_driver = {
 264         .driver         = {
 265                 .name   = "sdhci-pxav3",
 266                 .owner  = THIS_MODULE,
 267         },
 268         .probe          = sdhci_pxav3_probe,
 269         .remove         = __devexit_p(sdhci_pxav3_remove),
 270 #ifdef CONFIG_PM
 271         .suspend        = sdhci_pltfm_suspend,
 272         .resume         = sdhci_pltfm_resume,
 273 #endif
 274 };
 275 static int __init sdhci_pxav3_init(void)
 276 {
 277         return platform_driver_register(&sdhci_pxav3_driver);
 278 }
 279
 280 static void __exit sdhci_pxav3_exit(void)
 281 {
 282         platform_driver_unregister(&sdhci_pxav3_driver);
 283 }
 284
 285 module_init(sdhci_pxav3_init);
 286 module_exit(sdhci_pxav3_exit);
 287
 288 MODULE_DESCRIPTION("SDHCI driver for pxav3");
 289 MODULE_AUTHOR("Marvell International Ltd.");
 290 MODULE_LICENSE("GPL v2");
 291