kvm tools, setup: Create private directory
[linux-2.6/next.git] / arch / mips / include / asm / irqflags.h
blob309cbcd6909cd808b92941e53deea0e3e3a5a756
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
7 * Copyright (C) 1996 by Paul M. Antoine
8 * Copyright (C) 1999 Silicon Graphics
9 * Copyright (C) 2000 MIPS Technologies, Inc.
11 #ifndef _ASM_IRQFLAGS_H
12 #define _ASM_IRQFLAGS_H
14 #ifndef __ASSEMBLY__
16 #include <linux/compiler.h>
17 #include <asm/hazards.h>
19 __asm__(
20 " .macro arch_local_irq_enable \n"
21 " .set push \n"
22 " .set reorder \n"
23 " .set noat \n"
24 #ifdef CONFIG_MIPS_MT_SMTC
25 " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
26 " ori $1, 0x400 \n"
27 " xori $1, 0x400 \n"
28 " mtc0 $1, $2, 1 \n"
29 #elif defined(CONFIG_CPU_MIPSR2)
30 " ei \n"
31 #else
32 " mfc0 $1,$12 \n"
33 " ori $1,0x1f \n"
34 " xori $1,0x1e \n"
35 " mtc0 $1,$12 \n"
36 #endif
37 " irq_enable_hazard \n"
38 " .set pop \n"
39 " .endm");
41 extern void smtc_ipi_replay(void);
43 static inline void arch_local_irq_enable(void)
45 #ifdef CONFIG_MIPS_MT_SMTC
47 * SMTC kernel needs to do a software replay of queued
48 * IPIs, at the cost of call overhead on each local_irq_enable()
50 smtc_ipi_replay();
51 #endif
52 __asm__ __volatile__(
53 "arch_local_irq_enable"
54 : /* no outputs */
55 : /* no inputs */
56 : "memory");
61 * For cli() we have to insert nops to make sure that the new value
62 * has actually arrived in the status register before the end of this
63 * macro.
64 * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
65 * no nops at all.
68 * For TX49, operating only IE bit is not enough.
70 * If mfc0 $12 follows store and the mfc0 is last instruction of a
71 * page and fetching the next instruction causes TLB miss, the result
72 * of the mfc0 might wrongly contain EXL bit.
74 * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
76 * Workaround: mask EXL bit of the result or place a nop before mfc0.
78 __asm__(
79 " .macro arch_local_irq_disable\n"
80 " .set push \n"
81 " .set noat \n"
82 #ifdef CONFIG_MIPS_MT_SMTC
83 " mfc0 $1, $2, 1 \n"
84 " ori $1, 0x400 \n"
85 " .set noreorder \n"
86 " mtc0 $1, $2, 1 \n"
87 #elif defined(CONFIG_CPU_MIPSR2)
88 " di \n"
89 #else
90 " mfc0 $1,$12 \n"
91 " ori $1,0x1f \n"
92 " xori $1,0x1f \n"
93 " .set noreorder \n"
94 " mtc0 $1,$12 \n"
95 #endif
96 " irq_disable_hazard \n"
97 " .set pop \n"
98 " .endm \n");
100 static inline void arch_local_irq_disable(void)
102 __asm__ __volatile__(
103 "arch_local_irq_disable"
104 : /* no outputs */
105 : /* no inputs */
106 : "memory");
109 __asm__(
110 " .macro arch_local_save_flags flags \n"
111 " .set push \n"
112 " .set reorder \n"
113 #ifdef CONFIG_MIPS_MT_SMTC
114 " mfc0 \\flags, $2, 1 \n"
115 #else
116 " mfc0 \\flags, $12 \n"
117 #endif
118 " .set pop \n"
119 " .endm \n");
121 static inline unsigned long arch_local_save_flags(void)
123 unsigned long flags;
124 asm volatile("arch_local_save_flags %0" : "=r" (flags));
125 return flags;
128 __asm__(
129 " .macro arch_local_irq_save result \n"
130 " .set push \n"
131 " .set reorder \n"
132 " .set noat \n"
133 #ifdef CONFIG_MIPS_MT_SMTC
134 " mfc0 \\result, $2, 1 \n"
135 " ori $1, \\result, 0x400 \n"
136 " .set noreorder \n"
137 " mtc0 $1, $2, 1 \n"
138 " andi \\result, \\result, 0x400 \n"
139 #elif defined(CONFIG_CPU_MIPSR2)
140 " di \\result \n"
141 " andi \\result, 1 \n"
142 #else
143 " mfc0 \\result, $12 \n"
144 " ori $1, \\result, 0x1f \n"
145 " xori $1, 0x1f \n"
146 " .set noreorder \n"
147 " mtc0 $1, $12 \n"
148 #endif
149 " irq_disable_hazard \n"
150 " .set pop \n"
151 " .endm \n");
153 static inline unsigned long arch_local_irq_save(void)
155 unsigned long flags;
156 asm volatile("arch_local_irq_save\t%0"
157 : "=r" (flags)
158 : /* no inputs */
159 : "memory");
160 return flags;
163 __asm__(
164 " .macro arch_local_irq_restore flags \n"
165 " .set push \n"
166 " .set noreorder \n"
167 " .set noat \n"
168 #ifdef CONFIG_MIPS_MT_SMTC
169 "mfc0 $1, $2, 1 \n"
170 "andi \\flags, 0x400 \n"
171 "ori $1, 0x400 \n"
172 "xori $1, 0x400 \n"
173 "or \\flags, $1 \n"
174 "mtc0 \\flags, $2, 1 \n"
175 #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
177 * Slow, but doesn't suffer from a relatively unlikely race
178 * condition we're having since days 1.
180 " beqz \\flags, 1f \n"
181 " di \n"
182 " ei \n"
183 "1: \n"
184 #elif defined(CONFIG_CPU_MIPSR2)
186 * Fast, dangerous. Life is fun, life is good.
188 " mfc0 $1, $12 \n"
189 " ins $1, \\flags, 0, 1 \n"
190 " mtc0 $1, $12 \n"
191 #else
192 " mfc0 $1, $12 \n"
193 " andi \\flags, 1 \n"
194 " ori $1, 0x1f \n"
195 " xori $1, 0x1f \n"
196 " or \\flags, $1 \n"
197 " mtc0 \\flags, $12 \n"
198 #endif
199 " irq_disable_hazard \n"
200 " .set pop \n"
201 " .endm \n");
204 static inline void arch_local_irq_restore(unsigned long flags)
206 unsigned long __tmp1;
208 #ifdef CONFIG_MIPS_MT_SMTC
210 * SMTC kernel needs to do a software replay of queued
211 * IPIs, at the cost of branch and call overhead on each
212 * local_irq_restore()
214 if (unlikely(!(flags & 0x0400)))
215 smtc_ipi_replay();
216 #endif
218 __asm__ __volatile__(
219 "arch_local_irq_restore\t%0"
220 : "=r" (__tmp1)
221 : "0" (flags)
222 : "memory");
225 static inline void __arch_local_irq_restore(unsigned long flags)
227 unsigned long __tmp1;
229 __asm__ __volatile__(
230 "arch_local_irq_restore\t%0"
231 : "=r" (__tmp1)
232 : "0" (flags)
233 : "memory");
236 static inline int arch_irqs_disabled_flags(unsigned long flags)
238 #ifdef CONFIG_MIPS_MT_SMTC
240 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
242 return flags & 0x400;
243 #else
244 return !(flags & 1);
245 #endif
248 #endif
251 * Do the CPU's IRQ-state tracing from assembly code.
253 #ifdef CONFIG_TRACE_IRQFLAGS
254 /* Reload some registers clobbered by trace_hardirqs_on */
255 #ifdef CONFIG_64BIT
256 # define TRACE_IRQS_RELOAD_REGS \
257 LONG_L $11, PT_R11(sp); \
258 LONG_L $10, PT_R10(sp); \
259 LONG_L $9, PT_R9(sp); \
260 LONG_L $8, PT_R8(sp); \
261 LONG_L $7, PT_R7(sp); \
262 LONG_L $6, PT_R6(sp); \
263 LONG_L $5, PT_R5(sp); \
264 LONG_L $4, PT_R4(sp); \
265 LONG_L $2, PT_R2(sp)
266 #else
267 # define TRACE_IRQS_RELOAD_REGS \
268 LONG_L $7, PT_R7(sp); \
269 LONG_L $6, PT_R6(sp); \
270 LONG_L $5, PT_R5(sp); \
271 LONG_L $4, PT_R4(sp); \
272 LONG_L $2, PT_R2(sp)
273 #endif
274 # define TRACE_IRQS_ON \
275 CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \
276 jal trace_hardirqs_on
277 # define TRACE_IRQS_ON_RELOAD \
278 TRACE_IRQS_ON; \
279 TRACE_IRQS_RELOAD_REGS
280 # define TRACE_IRQS_OFF \
281 jal trace_hardirqs_off
282 #else
283 # define TRACE_IRQS_ON
284 # define TRACE_IRQS_ON_RELOAD
285 # define TRACE_IRQS_OFF
286 #endif
288 #endif /* _ASM_IRQFLAGS_H */