?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
V4L/DVB (6715): ivtv: Remove unnecessary register update
[linux-2.6/verdex.git] / drivers / mmc / host / sdhci.c
blob785bbdcf4a58212e4371fbdc024a1ef1919ffc88
1 /*
2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
3 *
4 * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 *
11 * Thanks to the following companies for their support:
12 *
13 * - JMicron (hardware and technical support)
14 */
15
16 #include <linux/delay.h>
17 #include <linux/highmem.h>
18 #include <linux/pci.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/scatterlist.h>
21
22 #include <linux/mmc/host.h>
23
24 #include "sdhci.h"
25
26 #define DRIVER_NAME "sdhci"
27
28 #define DBG(f, x...) \
29 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
30
31 static unsigned int debug_quirks = 0;
32
33 /*
34 * Different quirks to handle when the hardware deviates from a strict
35 * interpretation of the SDHCI specification.
36 */
37
38 /* Controller doesn't honor resets unless we touch the clock register */
39 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
40 /* Controller has bad caps bits, but really supports DMA */
41 #define SDHCI_QUIRK_FORCE_DMA (1<<1)
42 /* Controller doesn't like some resets when there is no card inserted. */
43 #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
44 /* Controller doesn't like clearing the power reg before a change */
45 #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
46 /* Controller has flaky internal state so reset it on each ios change */
47 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
48 /* Controller has an unusable DMA engine */
49 #define SDHCI_QUIRK_BROKEN_DMA (1<<5)
50 /* Controller can only DMA from 32-bit aligned addresses */
51 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6)
52 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
53 #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
54 /* Controller needs to be reset after each request to stay stable */
55 #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
56
57 static const struct pci_device_id pci_ids[] __devinitdata = {
58 {
59 .vendor = PCI_VENDOR_ID_RICOH,
60 .device = PCI_DEVICE_ID_RICOH_R5C822,
61 .subvendor = PCI_VENDOR_ID_IBM,
62 .subdevice = PCI_ANY_ID,
63 .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET |
64 SDHCI_QUIRK_FORCE_DMA,
65 },
66
67 {
68 .vendor = PCI_VENDOR_ID_RICOH,
69 .device = PCI_DEVICE_ID_RICOH_R5C822,
70 .subvendor = PCI_ANY_ID,
71 .subdevice = PCI_ANY_ID,
72 .driver_data = SDHCI_QUIRK_FORCE_DMA |
73 SDHCI_QUIRK_NO_CARD_NO_RESET,
74 },
75
76 {
77 .vendor = PCI_VENDOR_ID_TI,
78 .device = PCI_DEVICE_ID_TI_XX21_XX11_SD,
79 .subvendor = PCI_ANY_ID,
80 .subdevice = PCI_ANY_ID,
81 .driver_data = SDHCI_QUIRK_FORCE_DMA,
82 },
83
84 {
85 .vendor = PCI_VENDOR_ID_ENE,
86 .device = PCI_DEVICE_ID_ENE_CB712_SD,
87 .subvendor = PCI_ANY_ID,
88 .subdevice = PCI_ANY_ID,
89 .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
90 SDHCI_QUIRK_BROKEN_DMA,
91 },
92
93 {
94 .vendor = PCI_VENDOR_ID_ENE,
95 .device = PCI_DEVICE_ID_ENE_CB712_SD_2,
96 .subvendor = PCI_ANY_ID,
97 .subdevice = PCI_ANY_ID,
98 .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
99 SDHCI_QUIRK_BROKEN_DMA,
100 },
101
102 {
103 .vendor = PCI_VENDOR_ID_ENE,
104 .device = PCI_DEVICE_ID_ENE_CB714_SD,
105 .subvendor = PCI_ANY_ID,
106 .subdevice = PCI_ANY_ID,
107 .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
108 SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
109 },
110
111 {
112 .vendor = PCI_VENDOR_ID_ENE,
113 .device = PCI_DEVICE_ID_ENE_CB714_SD_2,
114 .subvendor = PCI_ANY_ID,
115 .subdevice = PCI_ANY_ID,
116 .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
117 SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
118 },
119
120 {
121 .vendor = PCI_VENDOR_ID_JMICRON,
122 .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
123 .subvendor = PCI_ANY_ID,
124 .subdevice = PCI_ANY_ID,
125 .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR |
126 SDHCI_QUIRK_32BIT_DMA_SIZE |
127 SDHCI_QUIRK_RESET_AFTER_REQUEST,
128 },
129
130 { /* Generic SD host controller */
131 PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
132 },
133
134 { /* end: all zeroes */ },
135 };
136
137 MODULE_DEVICE_TABLE(pci, pci_ids);
138
139 static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
140 static void sdhci_finish_data(struct sdhci_host *);
141
142 static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
143 static void sdhci_finish_command(struct sdhci_host *);
144
145 static void sdhci_dumpregs(struct sdhci_host *host)
146 {
147 printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
148
149 printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
150 readl(host->ioaddr + SDHCI_DMA_ADDRESS),
151 readw(host->ioaddr + SDHCI_HOST_VERSION));
152 printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
153 readw(host->ioaddr + SDHCI_BLOCK_SIZE),
154 readw(host->ioaddr + SDHCI_BLOCK_COUNT));
155 printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
156 readl(host->ioaddr + SDHCI_ARGUMENT),
157 readw(host->ioaddr + SDHCI_TRANSFER_MODE));
158 printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
159 readl(host->ioaddr + SDHCI_PRESENT_STATE),
160 readb(host->ioaddr + SDHCI_HOST_CONTROL));
161 printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
162 readb(host->ioaddr + SDHCI_POWER_CONTROL),
163 readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL));
164 printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
165 readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL),
166 readw(host->ioaddr + SDHCI_CLOCK_CONTROL));
167 printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
168 readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL),
169 readl(host->ioaddr + SDHCI_INT_STATUS));
170 printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
171 readl(host->ioaddr + SDHCI_INT_ENABLE),
172 readl(host->ioaddr + SDHCI_SIGNAL_ENABLE));
173 printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
174 readw(host->ioaddr + SDHCI_ACMD12_ERR),
175 readw(host->ioaddr + SDHCI_SLOT_INT_STATUS));
176 printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n",
177 readl(host->ioaddr + SDHCI_CAPABILITIES),
178 readl(host->ioaddr + SDHCI_MAX_CURRENT));
179
180 printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
181 }
182
183 /*****************************************************************************\
184 * *
185 * Low level functions *
186 * *
187 \*****************************************************************************/
188
189 static void sdhci_reset(struct sdhci_host *host, u8 mask)
190 {
191 unsigned long timeout;
192
193 if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
194 if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
195 SDHCI_CARD_PRESENT))
196 return;
197 }
198
199 writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
200
201 if (mask & SDHCI_RESET_ALL)
202 host->clock = 0;
203
204 /* Wait max 100 ms */
205 timeout = 100;
206
207 /* hw clears the bit when it's done */
208 while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
209 if (timeout == 0) {
210 printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
211 mmc_hostname(host->mmc), (int)mask);
212 sdhci_dumpregs(host);
213 return;
214 }
215 timeout--;
216 mdelay(1);
217 }
218 }
219
220 static void sdhci_init(struct sdhci_host *host)
221 {
222 u32 intmask;
223
224 sdhci_reset(host, SDHCI_RESET_ALL);
225
226 intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
227 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
228 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
229 SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
230 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
231 SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
232
233 writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
234 writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
235 }
236
237 static void sdhci_activate_led(struct sdhci_host *host)
238 {
239 u8 ctrl;
240
241 ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
242 ctrl |= SDHCI_CTRL_LED;
243 writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
244 }
245
246 static void sdhci_deactivate_led(struct sdhci_host *host)
247 {
248 u8 ctrl;
249
250 ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
251 ctrl &= ~SDHCI_CTRL_LED;
252 writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
253 }
254
255 /*****************************************************************************\
256 * *
257 * Core functions *
258 * *
259 \*****************************************************************************/
260
261 static inline char* sdhci_sg_to_buffer(struct sdhci_host* host)
262 {
263 return sg_virt(host->cur_sg);
264 }
265
266 static inline int sdhci_next_sg(struct sdhci_host* host)
267 {
268 /*
269 * Skip to next SG entry.
270 */
271 host->cur_sg++;
272 host->num_sg--;
273
274 /*
275 * Any entries left?
276 */
277 if (host->num_sg > 0) {
278 host->offset = 0;
279 host->remain = host->cur_sg->length;
280 }
281
282 return host->num_sg;
283 }
284
285 static void sdhci_read_block_pio(struct sdhci_host *host)
286 {
287 int blksize, chunk_remain;
288 u32 data;
289 char *buffer;
290 int size;
291
292 DBG("PIO reading\n");
293
294 blksize = host->data->blksz;
295 chunk_remain = 0;
296 data = 0;
297
298 buffer = sdhci_sg_to_buffer(host) + host->offset;
299
300 while (blksize) {
301 if (chunk_remain == 0) {
302 data = readl(host->ioaddr + SDHCI_BUFFER);
303 chunk_remain = min(blksize, 4);
304 }
305
306 size = min(host->remain, chunk_remain);
307
308 chunk_remain -= size;
309 blksize -= size;
310 host->offset += size;
311 host->remain -= size;
312
313 while (size) {
314 *buffer = data & 0xFF;
315 buffer++;
316 data >>= 8;
317 size--;
318 }
319
320 if (host->remain == 0) {
321 if (sdhci_next_sg(host) == 0) {
322 BUG_ON(blksize != 0);
323 return;
324 }
325 buffer = sdhci_sg_to_buffer(host);
326 }
327 }
328 }
329
330 static void sdhci_write_block_pio(struct sdhci_host *host)
331 {
332 int blksize, chunk_remain;
333 u32 data;
334 char *buffer;
335 int bytes, size;
336
337 DBG("PIO writing\n");
338
339 blksize = host->data->blksz;
340 chunk_remain = 4;
341 data = 0;
342
343 bytes = 0;
344 buffer = sdhci_sg_to_buffer(host) + host->offset;
345
346 while (blksize) {
347 size = min(host->remain, chunk_remain);
348
349 chunk_remain -= size;
350 blksize -= size;
351 host->offset += size;
352 host->remain -= size;
353
354 while (size) {
355 data >>= 8;
356 data |= (u32)*buffer << 24;
357 buffer++;
358 size--;
359 }
360
361 if (chunk_remain == 0) {
362 writel(data, host->ioaddr + SDHCI_BUFFER);
363 chunk_remain = min(blksize, 4);
364 }
365
366 if (host->remain == 0) {
367 if (sdhci_next_sg(host) == 0) {
368 BUG_ON(blksize != 0);
369 return;
370 }
371 buffer = sdhci_sg_to_buffer(host);
372 }
373 }
374 }
375
376 static void sdhci_transfer_pio(struct sdhci_host *host)
377 {
378 u32 mask;
379
380 BUG_ON(!host->data);
381
382 if (host->num_sg == 0)
383 return;
384
385 if (host->data->flags & MMC_DATA_READ)
386 mask = SDHCI_DATA_AVAILABLE;
387 else
388 mask = SDHCI_SPACE_AVAILABLE;
389
390 while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
391 if (host->data->flags & MMC_DATA_READ)
392 sdhci_read_block_pio(host);
393 else
394 sdhci_write_block_pio(host);
395
396 if (host->num_sg == 0)
397 break;
398 }
399
400 DBG("PIO transfer complete.\n");
401 }
402
403 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
404 {
405 u8 count;
406 unsigned target_timeout, current_timeout;
407
408 WARN_ON(host->data);
409
410 if (data == NULL)
411 return;
412
413 /* Sanity checks */
414 BUG_ON(data->blksz * data->blocks > 524288);
415 BUG_ON(data->blksz > host->mmc->max_blk_size);
416 BUG_ON(data->blocks > 65535);
417
418 host->data = data;
419 host->data_early = 0;
420
421 /* timeout in us */
422 target_timeout = data->timeout_ns / 1000 +
423 data->timeout_clks / host->clock;
424
425 /*
426 * Figure out needed cycles.
427 * We do this in steps in order to fit inside a 32 bit int.
428 * The first step is the minimum timeout, which will have a
429 * minimum resolution of 6 bits:
430 * (1) 2^13*1000 > 2^22,
431 * (2) host->timeout_clk < 2^16
432 * =>
433 * (1) / (2) > 2^6
434 */
435 count = 0;
436 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
437 while (current_timeout < target_timeout) {
438 count++;
439 current_timeout <<= 1;
440 if (count >= 0xF)
441 break;
442 }
443
444 if (count >= 0xF) {
445 printk(KERN_WARNING "%s: Too large timeout requested!\n",
446 mmc_hostname(host->mmc));
447 count = 0xE;
448 }
449
450 writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
451
452 if (host->flags & SDHCI_USE_DMA)
453 host->flags |= SDHCI_REQ_USE_DMA;
454
455 if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
456 (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) &&
457 ((data->blksz * data->blocks) & 0x3))) {
458 DBG("Reverting to PIO because of transfer size (%d)\n",
459 data->blksz * data->blocks);
460 host->flags &= ~SDHCI_REQ_USE_DMA;
461 }
462
463 /*
464 * The assumption here being that alignment is the same after
465 * translation to device address space.
466 */
467 if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
468 (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
469 (data->sg->offset & 0x3))) {
470 DBG("Reverting to PIO because of bad alignment\n");
471 host->flags &= ~SDHCI_REQ_USE_DMA;
472 }
473
474 if (host->flags & SDHCI_REQ_USE_DMA) {
475 int count;
476
477 count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len,
478 (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
479 BUG_ON(count != 1);
480
481 writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS);
482 } else {
483 host->cur_sg = data->sg;
484 host->num_sg = data->sg_len;
485
486 host->offset = 0;
487 host->remain = host->cur_sg->length;
488 }
489
490 /* We do not handle DMA boundaries, so set it to max (512 KiB) */
491 writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
492 host->ioaddr + SDHCI_BLOCK_SIZE);
493 writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
494 }
495
496 static void sdhci_set_transfer_mode(struct sdhci_host *host,
497 struct mmc_data *data)
498 {
499 u16 mode;
500
501 if (data == NULL)
502 return;
503
504 WARN_ON(!host->data);
505
506 mode = SDHCI_TRNS_BLK_CNT_EN;
507 if (data->blocks > 1)
508 mode |= SDHCI_TRNS_MULTI;
509 if (data->flags & MMC_DATA_READ)
510 mode |= SDHCI_TRNS_READ;
511 if (host->flags & SDHCI_REQ_USE_DMA)
512 mode |= SDHCI_TRNS_DMA;
513
514 writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
515 }
516
517 static void sdhci_finish_data(struct sdhci_host *host)
518 {
519 struct mmc_data *data;
520 u16 blocks;
521
522 BUG_ON(!host->data);
523
524 data = host->data;
525 host->data = NULL;
526
527 if (host->flags & SDHCI_REQ_USE_DMA) {
528 pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
529 (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
530 }
531
532 /*
533 * Controller doesn't count down when in single block mode.
534 */
535 if (data->blocks == 1)
536 blocks = (data->error == 0) ? 0 : 1;
537 else
538 blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT);
539 data->bytes_xfered = data->blksz * (data->blocks - blocks);
540
541 if (!data->error && blocks) {
542 printk(KERN_ERR "%s: Controller signalled completion even "
543 "though there were blocks left.\n",
544 mmc_hostname(host->mmc));
545 data->error = -EIO;
546 }
547
548 if (data->stop) {
549 /*
550 * The controller needs a reset of internal state machines
551 * upon error conditions.
552 */
553 if (data->error) {
554 sdhci_reset(host, SDHCI_RESET_CMD);
555 sdhci_reset(host, SDHCI_RESET_DATA);
556 }
557
558 sdhci_send_command(host, data->stop);
559 } else
560 tasklet_schedule(&host->finish_tasklet);
561 }
562
563 static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
564 {
565 int flags;
566 u32 mask;
567 unsigned long timeout;
568
569 WARN_ON(host->cmd);
570
571 /* Wait max 10 ms */
572 timeout = 10;
573
574 mask = SDHCI_CMD_INHIBIT;
575 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
576 mask |= SDHCI_DATA_INHIBIT;
577
578 /* We shouldn't wait for data inihibit for stop commands, even
579 though they might use busy signaling */
580 if (host->mrq->data && (cmd == host->mrq->data->stop))
581 mask &= ~SDHCI_DATA_INHIBIT;
582
583 while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
584 if (timeout == 0) {
585 printk(KERN_ERR "%s: Controller never released "
586 "inhibit bit(s).\n", mmc_hostname(host->mmc));
587 sdhci_dumpregs(host);
588 cmd->error = -EIO;
589 tasklet_schedule(&host->finish_tasklet);
590 return;
591 }
592 timeout--;
593 mdelay(1);
594 }
595
596 mod_timer(&host->timer, jiffies + 10 * HZ);
597
598 host->cmd = cmd;
599
600 sdhci_prepare_data(host, cmd->data);
601
602 writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
603
604 sdhci_set_transfer_mode(host, cmd->data);
605
606 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
607 printk(KERN_ERR "%s: Unsupported response type!\n",
608 mmc_hostname(host->mmc));
609 cmd->error = -EINVAL;
610 tasklet_schedule(&host->finish_tasklet);
611 return;
612 }
613
614 if (!(cmd->flags & MMC_RSP_PRESENT))
615 flags = SDHCI_CMD_RESP_NONE;
616 else if (cmd->flags & MMC_RSP_136)
617 flags = SDHCI_CMD_RESP_LONG;
618 else if (cmd->flags & MMC_RSP_BUSY)
619 flags = SDHCI_CMD_RESP_SHORT_BUSY;
620 else
621 flags = SDHCI_CMD_RESP_SHORT;
622
623 if (cmd->flags & MMC_RSP_CRC)
624 flags |= SDHCI_CMD_CRC;
625 if (cmd->flags & MMC_RSP_OPCODE)
626 flags |= SDHCI_CMD_INDEX;
627 if (cmd->data)
628 flags |= SDHCI_CMD_DATA;
629
630 writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
631 host->ioaddr + SDHCI_COMMAND);
632 }
633
634 static void sdhci_finish_command(struct sdhci_host *host)
635 {
636 int i;
637
638 BUG_ON(host->cmd == NULL);
639
640 if (host->cmd->flags & MMC_RSP_PRESENT) {
641 if (host->cmd->flags & MMC_RSP_136) {
642 /* CRC is stripped so we need to do some shifting. */
643 for (i = 0;i < 4;i++) {
644 host->cmd->resp[i] = readl(host->ioaddr +
645 SDHCI_RESPONSE + (3-i)*4) << 8;
646 if (i != 3)
647 host->cmd->resp[i] |=
648 readb(host->ioaddr +
649 SDHCI_RESPONSE + (3-i)*4-1);
650 }
651 } else {
652 host->cmd->resp[0] = readl(host->ioaddr + SDHCI_RESPONSE);
653 }
654 }
655
656 host->cmd->error = 0;
657
658 if (host->data && host->data_early)
659 sdhci_finish_data(host);
660
661 if (!host->cmd->data)
662 tasklet_schedule(&host->finish_tasklet);
663
664 host->cmd = NULL;
665 }
666
667 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
668 {
669 int div;
670 u16 clk;
671 unsigned long timeout;
672
673 if (clock == host->clock)
674 return;
675
676 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
677
678 if (clock == 0)
679 goto out;
680
681 for (div = 1;div < 256;div *= 2) {
682 if ((host->max_clk / div) <= clock)
683 break;
684 }
685 div >>= 1;
686
687 clk = div << SDHCI_DIVIDER_SHIFT;
688 clk |= SDHCI_CLOCK_INT_EN;
689 writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
690
691 /* Wait max 10 ms */
692 timeout = 10;
693 while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
694 & SDHCI_CLOCK_INT_STABLE)) {
695 if (timeout == 0) {
696 printk(KERN_ERR "%s: Internal clock never "
697 "stabilised.\n", mmc_hostname(host->mmc));
698 sdhci_dumpregs(host);
699 return;
700 }
701 timeout--;
702 mdelay(1);
703 }
704
705 clk |= SDHCI_CLOCK_CARD_EN;
706 writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
707
708 out:
709 host->clock = clock;
710 }
711
712 static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
713 {
714 u8 pwr;
715
716 if (host->power == power)
717 return;
718
719 if (power == (unsigned short)-1) {
720 writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
721 goto out;
722 }
723
724 /*
725 * Spec says that we should clear the power reg before setting
726 * a new value. Some controllers don't seem to like this though.
727 */
728 if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
729 writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
730
731 pwr = SDHCI_POWER_ON;
732
733 switch (1 << power) {
734 case MMC_VDD_165_195:
735 pwr |= SDHCI_POWER_180;
736 break;
737 case MMC_VDD_29_30:
738 case MMC_VDD_30_31:
739 pwr |= SDHCI_POWER_300;
740 break;
741 case MMC_VDD_32_33:
742 case MMC_VDD_33_34:
743 pwr |= SDHCI_POWER_330;
744 break;
745 default:
746 BUG();
747 }
748
749 writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
750
751 out:
752 host->power = power;
753 }
754
755 /*****************************************************************************\
756 * *
757 * MMC callbacks *
758 * *
759 \*****************************************************************************/
760
761 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
762 {
763 struct sdhci_host *host;
764 unsigned long flags;
765
766 host = mmc_priv(mmc);
767
768 spin_lock_irqsave(&host->lock, flags);
769
770 WARN_ON(host->mrq != NULL);
771
772 sdhci_activate_led(host);
773
774 host->mrq = mrq;
775
776 if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
777 host->mrq->cmd->error = -ENOMEDIUM;
778 tasklet_schedule(&host->finish_tasklet);
779 } else
780 sdhci_send_command(host, mrq->cmd);
781
782 mmiowb();
783 spin_unlock_irqrestore(&host->lock, flags);
784 }
785
786 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
787 {
788 struct sdhci_host *host;
789 unsigned long flags;
790 u8 ctrl;
791
792 host = mmc_priv(mmc);
793
794 spin_lock_irqsave(&host->lock, flags);
795
796 /*
797 * Reset the chip on each power off.
798 * Should clear out any weird states.
799 */
800 if (ios->power_mode == MMC_POWER_OFF) {
801 writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
802 sdhci_init(host);
803 }
804
805 sdhci_set_clock(host, ios->clock);
806
807 if (ios->power_mode == MMC_POWER_OFF)
808 sdhci_set_power(host, -1);
809 else
810 sdhci_set_power(host, ios->vdd);
811
812 ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
813
814 if (ios->bus_width == MMC_BUS_WIDTH_4)
815 ctrl |= SDHCI_CTRL_4BITBUS;
816 else
817 ctrl &= ~SDHCI_CTRL_4BITBUS;
818
819 if (ios->timing == MMC_TIMING_SD_HS)
820 ctrl |= SDHCI_CTRL_HISPD;
821 else
822 ctrl &= ~SDHCI_CTRL_HISPD;
823
824 writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
825
826 /*
827 * Some (ENE) controllers go apeshit on some ios operation,
828 * signalling timeout and CRC errors even on CMD0. Resetting
829 * it on each ios seems to solve the problem.
830 */
831 if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
832 sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
833
834 mmiowb();
835 spin_unlock_irqrestore(&host->lock, flags);
836 }
837
838 static int sdhci_get_ro(struct mmc_host *mmc)
839 {
840 struct sdhci_host *host;
841 unsigned long flags;
842 int present;
843
844 host = mmc_priv(mmc);
845
846 spin_lock_irqsave(&host->lock, flags);
847
848 present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
849
850 spin_unlock_irqrestore(&host->lock, flags);
851
852 return !(present & SDHCI_WRITE_PROTECT);
853 }
854
855 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
856 {
857 struct sdhci_host *host;
858 unsigned long flags;
859 u32 ier;
860
861 host = mmc_priv(mmc);
862
863 spin_lock_irqsave(&host->lock, flags);
864
865 ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
866
867 ier &= ~SDHCI_INT_CARD_INT;
868 if (enable)
869 ier |= SDHCI_INT_CARD_INT;
870
871 writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
872 writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
873
874 mmiowb();
875
876 spin_unlock_irqrestore(&host->lock, flags);
877 }
878
879 static const struct mmc_host_ops sdhci_ops = {
880 .request = sdhci_request,
881 .set_ios = sdhci_set_ios,
882 .get_ro = sdhci_get_ro,
883 .enable_sdio_irq = sdhci_enable_sdio_irq,
884 };
885
886 /*****************************************************************************\
887 * *
888 * Tasklets *
889 * *
890 \*****************************************************************************/
891
892 static void sdhci_tasklet_card(unsigned long param)
893 {
894 struct sdhci_host *host;
895 unsigned long flags;
896
897 host = (struct sdhci_host*)param;
898
899 spin_lock_irqsave(&host->lock, flags);
900
901 if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
902 if (host->mrq) {
903 printk(KERN_ERR "%s: Card removed during transfer!\n",
904 mmc_hostname(host->mmc));
905 printk(KERN_ERR "%s: Resetting controller.\n",
906 mmc_hostname(host->mmc));
907
908 sdhci_reset(host, SDHCI_RESET_CMD);
909 sdhci_reset(host, SDHCI_RESET_DATA);
910
911 host->mrq->cmd->error = -ENOMEDIUM;
912 tasklet_schedule(&host->finish_tasklet);
913 }
914 }
915
916 spin_unlock_irqrestore(&host->lock, flags);
917
918 mmc_detect_change(host->mmc, msecs_to_jiffies(500));
919 }
920
921 static void sdhci_tasklet_finish(unsigned long param)
922 {
923 struct sdhci_host *host;
924 unsigned long flags;
925 struct mmc_request *mrq;
926
927 host = (struct sdhci_host*)param;
928
929 spin_lock_irqsave(&host->lock, flags);
930
931 del_timer(&host->timer);
932
933 mrq = host->mrq;
934
935 /*
936 * The controller needs a reset of internal state machines
937 * upon error conditions.
938 */
939 if (mrq->cmd->error ||
940 (mrq->data && (mrq->data->error ||
941 (mrq->data->stop && mrq->data->stop->error))) ||
942 (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) {
943
944 /* Some controllers need this kick or reset won't work here */
945 if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
946 unsigned int clock;
947
948 /* This is to force an update */
949 clock = host->clock;
950 host->clock = 0;
951 sdhci_set_clock(host, clock);
952 }
953
954 /* Spec says we should do both at the same time, but Ricoh
955 controllers do not like that. */
956 sdhci_reset(host, SDHCI_RESET_CMD);
957 sdhci_reset(host, SDHCI_RESET_DATA);
958 }
959
960 host->mrq = NULL;
961 host->cmd = NULL;
962 host->data = NULL;
963
964 sdhci_deactivate_led(host);
965
966 mmiowb();
967 spin_unlock_irqrestore(&host->lock, flags);
968
969 mmc_request_done(host->mmc, mrq);
970 }
971
972 static void sdhci_timeout_timer(unsigned long data)
973 {
974 struct sdhci_host *host;
975 unsigned long flags;
976
977 host = (struct sdhci_host*)data;
978
979 spin_lock_irqsave(&host->lock, flags);
980
981 if (host->mrq) {
982 printk(KERN_ERR "%s: Timeout waiting for hardware "
983 "interrupt.\n", mmc_hostname(host->mmc));
984 sdhci_dumpregs(host);
985
986 if (host->data) {
987 host->data->error = -ETIMEDOUT;
988 sdhci_finish_data(host);
989 } else {
990 if (host->cmd)
991 host->cmd->error = -ETIMEDOUT;
992 else
993 host->mrq->cmd->error = -ETIMEDOUT;
994
995 tasklet_schedule(&host->finish_tasklet);
996 }
997 }
998
999 mmiowb();
1000 spin_unlock_irqrestore(&host->lock, flags);
1001 }
1002
1003 /*****************************************************************************\
1004 * *
1005 * Interrupt handling *
1006 * *
1007 \*****************************************************************************/
1008
1009 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
1010 {
1011 BUG_ON(intmask == 0);
1012
1013 if (!host->cmd) {
1014 printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
1015 "though no command operation was in progress.\n",
1016 mmc_hostname(host->mmc), (unsigned)intmask);
1017 sdhci_dumpregs(host);
1018 return;
1019 }
1020
1021 if (intmask & SDHCI_INT_TIMEOUT)
1022 host->cmd->error = -ETIMEDOUT;
1023 else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
1024 SDHCI_INT_INDEX))
1025 host->cmd->error = -EILSEQ;
1026
1027 if (host->cmd->error)
1028 tasklet_schedule(&host->finish_tasklet);
1029 else if (intmask & SDHCI_INT_RESPONSE)
1030 sdhci_finish_command(host);
1031 }
1032
1033 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
1034 {
1035 BUG_ON(intmask == 0);
1036
1037 if (!host->data) {
1038 /*
1039 * A data end interrupt is sent together with the response
1040 * for the stop command.
1041 */
1042 if (intmask & SDHCI_INT_DATA_END)
1043 return;
1044
1045 printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
1046 "though no data operation was in progress.\n",
1047 mmc_hostname(host->mmc), (unsigned)intmask);
1048 sdhci_dumpregs(host);
1049
1050 return;
1051 }
1052
1053 if (intmask & SDHCI_INT_DATA_TIMEOUT)
1054 host->data->error = -ETIMEDOUT;
1055 else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
1056 host->data->error = -EILSEQ;
1057
1058 if (host->data->error)
1059 sdhci_finish_data(host);
1060 else {
1061 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
1062 sdhci_transfer_pio(host);
1063
1064 /*
1065 * We currently don't do anything fancy with DMA
1066 * boundaries, but as we can't disable the feature
1067 * we need to at least restart the transfer.
1068 */
1069 if (intmask & SDHCI_INT_DMA_END)
1070 writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS),
1071 host->ioaddr + SDHCI_DMA_ADDRESS);
1072
1073 if (intmask & SDHCI_INT_DATA_END) {
1074 if (host->cmd) {
1075 /*
1076 * Data managed to finish before the
1077 * command completed. Make sure we do
1078 * things in the proper order.
1079 */
1080 host->data_early = 1;
1081 } else {
1082 sdhci_finish_data(host);
1083 }
1084 }
1085 }
1086 }
1087
1088 static irqreturn_t sdhci_irq(int irq, void *dev_id)
1089 {
1090 irqreturn_t result;
1091 struct sdhci_host* host = dev_id;
1092 u32 intmask;
1093 int cardint = 0;
1094
1095 spin_lock(&host->lock);
1096
1097 intmask = readl(host->ioaddr + SDHCI_INT_STATUS);
1098
1099 if (!intmask || intmask == 0xffffffff) {
1100 result = IRQ_NONE;
1101 goto out;
1102 }
1103
1104 DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
1105
1106 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
1107 writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
1108 host->ioaddr + SDHCI_INT_STATUS);
1109 tasklet_schedule(&host->card_tasklet);
1110 }
1111
1112 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
1113
1114 if (intmask & SDHCI_INT_CMD_MASK) {
1115 writel(intmask & SDHCI_INT_CMD_MASK,
1116 host->ioaddr + SDHCI_INT_STATUS);
1117 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
1118 }
1119
1120 if (intmask & SDHCI_INT_DATA_MASK) {
1121 writel(intmask & SDHCI_INT_DATA_MASK,
1122 host->ioaddr + SDHCI_INT_STATUS);
1123 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
1124 }
1125
1126 intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
1127
1128 intmask &= ~SDHCI_INT_ERROR;
1129
1130 if (intmask & SDHCI_INT_BUS_POWER) {
1131 printk(KERN_ERR "%s: Card is consuming too much power!\n",
1132 mmc_hostname(host->mmc));
1133 writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
1134 }
1135
1136 intmask &= ~SDHCI_INT_BUS_POWER;
1137
1138 if (intmask & SDHCI_INT_CARD_INT)
1139 cardint = 1;
1140
1141 intmask &= ~SDHCI_INT_CARD_INT;
1142
1143 if (intmask) {
1144 printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
1145 mmc_hostname(host->mmc), intmask);
1146 sdhci_dumpregs(host);
1147
1148 writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
1149 }
1150
1151 result = IRQ_HANDLED;
1152
1153 mmiowb();
1154 out:
1155 spin_unlock(&host->lock);
1156
1157 /*
1158 * We have to delay this as it calls back into the driver.
1159 */
1160 if (cardint)
1161 mmc_signal_sdio_irq(host->mmc);
1162
1163 return result;
1164 }
1165
1166 /*****************************************************************************\
1167 * *
1168 * Suspend/resume *
1169 * *
1170 \*****************************************************************************/
1171
1172 #ifdef CONFIG_PM
1173
1174 static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state)
1175 {
1176 struct sdhci_chip *chip;
1177 int i, ret;
1178
1179 chip = pci_get_drvdata(pdev);
1180 if (!chip)
1181 return 0;
1182
1183 DBG("Suspending...\n");
1184
1185 for (i = 0;i < chip->num_slots;i++) {
1186 if (!chip->hosts[i])
1187 continue;
1188 ret = mmc_suspend_host(chip->hosts[i]->mmc, state);
1189 if (ret) {
1190 for (i--;i >= 0;i--)
1191 mmc_resume_host(chip->hosts[i]->mmc);
1192 return ret;
1193 }
1194 }
1195
1196 pci_save_state(pdev);
1197 pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
1198
1199 for (i = 0;i < chip->num_slots;i++) {
1200 if (!chip->hosts[i])
1201 continue;
1202 free_irq(chip->hosts[i]->irq, chip->hosts[i]);
1203 }
1204
1205 pci_disable_device(pdev);
1206 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1207
1208 return 0;
1209 }
1210
1211 static int sdhci_resume (struct pci_dev *pdev)
1212 {
1213 struct sdhci_chip *chip;
1214 int i, ret;
1215
1216 chip = pci_get_drvdata(pdev);
1217 if (!chip)
1218 return 0;
1219
1220 DBG("Resuming...\n");
1221
1222 pci_set_power_state(pdev, PCI_D0);
1223 pci_restore_state(pdev);
1224 ret = pci_enable_device(pdev);
1225 if (ret)
1226 return ret;
1227
1228 for (i = 0;i < chip->num_slots;i++) {
1229 if (!chip->hosts[i])
1230 continue;
1231 if (chip->hosts[i]->flags & SDHCI_USE_DMA)
1232 pci_set_master(pdev);
1233 ret = request_irq(chip->hosts[i]->irq, sdhci_irq,
1234 IRQF_SHARED, chip->hosts[i]->slot_descr,
1235 chip->hosts[i]);
1236 if (ret)
1237 return ret;
1238 sdhci_init(chip->hosts[i]);
1239 mmiowb();
1240 ret = mmc_resume_host(chip->hosts[i]->mmc);
1241 if (ret)
1242 return ret;
1243 }
1244
1245 return 0;
1246 }
1247
1248 #else /* CONFIG_PM */
1249
1250 #define sdhci_suspend NULL
1251 #define sdhci_resume NULL
1252
1253 #endif /* CONFIG_PM */
1254
1255 /*****************************************************************************\
1256 * *
1257 * Device probing/removal *
1258 * *
1259 \*****************************************************************************/
1260
1261 static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
1262 {
1263 int ret;
1264 unsigned int version;
1265 struct sdhci_chip *chip;
1266 struct mmc_host *mmc;
1267 struct sdhci_host *host;
1268
1269 u8 first_bar;
1270 unsigned int caps;
1271
1272 chip = pci_get_drvdata(pdev);
1273 BUG_ON(!chip);
1274
1275 ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
1276 if (ret)
1277 return ret;
1278
1279 first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
1280
1281 if (first_bar > 5) {
1282 printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n");
1283 return -ENODEV;
1284 }
1285
1286 if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) {
1287 printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n");
1288 return -ENODEV;
1289 }
1290
1291 if (pci_resource_len(pdev, first_bar + slot) != 0x100) {
1292 printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. "
1293 "You may experience problems.\n");
1294 }
1295
1296 if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
1297 printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
1298 return -ENODEV;
1299 }
1300
1301 if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
1302 printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
1303 return -ENODEV;
1304 }
1305
1306 mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
1307 if (!mmc)
1308 return -ENOMEM;
1309
1310 host = mmc_priv(mmc);
1311 host->mmc = mmc;
1312
1313 host->chip = chip;
1314 chip->hosts[slot] = host;
1315
1316 host->bar = first_bar + slot;
1317
1318 host->addr = pci_resource_start(pdev, host->bar);
1319 host->irq = pdev->irq;
1320
1321 DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq);
1322
1323 snprintf(host->slot_descr, 20, "sdhci:slot%d", slot);
1324
1325 ret = pci_request_region(pdev, host->bar, host->slot_descr);
1326 if (ret)
1327 goto free;
1328
1329 host->ioaddr = ioremap_nocache(host->addr,
1330 pci_resource_len(pdev, host->bar));
1331 if (!host->ioaddr) {
1332 ret = -ENOMEM;
1333 goto release;
1334 }
1335
1336 sdhci_reset(host, SDHCI_RESET_ALL);
1337
1338 version = readw(host->ioaddr + SDHCI_HOST_VERSION);
1339 version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
1340 if (version > 1) {
1341 printk(KERN_ERR "%s: Unknown controller version (%d). "
1342 "You may experience problems.\n", host->slot_descr,
1343 version);
1344 }
1345
1346 caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
1347
1348 if (chip->quirks & SDHCI_QUIRK_FORCE_DMA)
1349 host->flags |= SDHCI_USE_DMA;
1350 else if (!(caps & SDHCI_CAN_DO_DMA))
1351 DBG("Controller doesn't have DMA capability\n");
1352 else
1353 host->flags |= SDHCI_USE_DMA;
1354
1355 if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
1356 (host->flags & SDHCI_USE_DMA)) {
1357 DBG("Disabling DMA as it is marked broken\n");
1358 host->flags &= ~SDHCI_USE_DMA;
1359 }
1360
1361 if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
1362 (host->flags & SDHCI_USE_DMA)) {
1363 printk(KERN_WARNING "%s: Will use DMA "
1364 "mode even though HW doesn't fully "
1365 "claim to support it.\n", host->slot_descr);
1366 }
1367
1368 if (host->flags & SDHCI_USE_DMA) {
1369 if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
1370 printk(KERN_WARNING "%s: No suitable DMA available. "
1371 "Falling back to PIO.\n", host->slot_descr);
1372 host->flags &= ~SDHCI_USE_DMA;
1373 }
1374 }
1375
1376 if (host->flags & SDHCI_USE_DMA)
1377 pci_set_master(pdev);
1378 else /* XXX: Hack to get MMC layer to avoid highmem */
1379 pdev->dma_mask = 0;
1380
1381 host->max_clk =
1382 (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
1383 if (host->max_clk == 0) {
1384 printk(KERN_ERR "%s: Hardware doesn't specify base clock "
1385 "frequency.\n", host->slot_descr);
1386 ret = -ENODEV;
1387 goto unmap;
1388 }
1389 host->max_clk *= 1000000;
1390
1391 host->timeout_clk =
1392 (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
1393 if (host->timeout_clk == 0) {
1394 printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
1395 "frequency.\n", host->slot_descr);
1396 ret = -ENODEV;
1397 goto unmap;
1398 }
1399 if (caps & SDHCI_TIMEOUT_CLK_UNIT)
1400 host->timeout_clk *= 1000;
1401
1402 /*
1403 * Set host parameters.
1404 */
1405 mmc->ops = &sdhci_ops;
1406 mmc->f_min = host->max_clk / 256;
1407 mmc->f_max = host->max_clk;
1408 mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ;
1409
1410 if (caps & SDHCI_CAN_DO_HISPD)
1411 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
1412
1413 mmc->ocr_avail = 0;
1414 if (caps & SDHCI_CAN_VDD_330)
1415 mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
1416 if (caps & SDHCI_CAN_VDD_300)
1417 mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
1418 if (caps & SDHCI_CAN_VDD_180)
1419 mmc->ocr_avail |= MMC_VDD_165_195;
1420
1421 if (mmc->ocr_avail == 0) {
1422 printk(KERN_ERR "%s: Hardware doesn't report any "
1423 "support voltages.\n", host->slot_descr);
1424 ret = -ENODEV;
1425 goto unmap;
1426 }
1427
1428 spin_lock_init(&host->lock);
1429
1430 /*
1431 * Maximum number of segments. Hardware cannot do scatter lists.
1432 */
1433 if (host->flags & SDHCI_USE_DMA)
1434 mmc->max_hw_segs = 1;
1435 else
1436 mmc->max_hw_segs = 16;
1437 mmc->max_phys_segs = 16;
1438
1439 /*
1440 * Maximum number of sectors in one transfer. Limited by DMA boundary
1441 * size (512KiB).
1442 */
1443 mmc->max_req_size = 524288;
1444
1445 /*
1446 * Maximum segment size. Could be one segment with the maximum number
1447 * of bytes.
1448 */
1449 mmc->max_seg_size = mmc->max_req_size;
1450
1451 /*
1452 * Maximum block size. This varies from controller to controller and
1453 * is specified in the capabilities register.
1454 */
1455 mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
1456 if (mmc->max_blk_size >= 3) {
1457 printk(KERN_WARNING "%s: Invalid maximum block size, assuming 512\n",
1458 host->slot_descr);
1459 mmc->max_blk_size = 512;
1460 } else
1461 mmc->max_blk_size = 512 << mmc->max_blk_size;
1462
1463 /*
1464 * Maximum block count.
1465 */
1466 mmc->max_blk_count = 65535;
1467
1468 /*
1469 * Init tasklets.
1470 */
1471 tasklet_init(&host->card_tasklet,
1472 sdhci_tasklet_card, (unsigned long)host);
1473 tasklet_init(&host->finish_tasklet,
1474 sdhci_tasklet_finish, (unsigned long)host);
1475
1476 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
1477
1478 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1479 host->slot_descr, host);
1480 if (ret)
1481 goto untasklet;
1482
1483 sdhci_init(host);
1484
1485 #ifdef CONFIG_MMC_DEBUG
1486 sdhci_dumpregs(host);
1487 #endif
1488
1489 mmiowb();
1490
1491 mmc_add_host(mmc);
1492
1493 printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n", mmc_hostname(mmc),
1494 host->addr, host->irq,
1495 (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
1496
1497 return 0;
1498
1499 untasklet:
1500 tasklet_kill(&host->card_tasklet);
1501 tasklet_kill(&host->finish_tasklet);
1502 unmap:
1503 iounmap(host->ioaddr);
1504 release:
1505 pci_release_region(pdev, host->bar);
1506 free:
1507 mmc_free_host(mmc);
1508
1509 return ret;
1510 }
1511
1512 static void sdhci_remove_slot(struct pci_dev *pdev, int slot)
1513 {
1514 struct sdhci_chip *chip;
1515 struct mmc_host *mmc;
1516 struct sdhci_host *host;
1517
1518 chip = pci_get_drvdata(pdev);
1519 host = chip->hosts[slot];
1520 mmc = host->mmc;
1521
1522 chip->hosts[slot] = NULL;
1523
1524 mmc_remove_host(mmc);
1525
1526 sdhci_reset(host, SDHCI_RESET_ALL);
1527
1528 free_irq(host->irq, host);
1529
1530 del_timer_sync(&host->timer);
1531
1532 tasklet_kill(&host->card_tasklet);
1533 tasklet_kill(&host->finish_tasklet);
1534
1535 iounmap(host->ioaddr);
1536
1537 pci_release_region(pdev, host->bar);
1538
1539 mmc_free_host(mmc);
1540 }
1541
1542 static int __devinit sdhci_probe(struct pci_dev *pdev,
1543 const struct pci_device_id *ent)
1544 {
1545 int ret, i;
1546 u8 slots, rev;
1547 struct sdhci_chip *chip;
1548
1549 BUG_ON(pdev == NULL);
1550 BUG_ON(ent == NULL);
1551
1552 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
1553
1554 printk(KERN_INFO DRIVER_NAME
1555 ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n",
1556 pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
1557 (int)rev);
1558
1559 ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
1560 if (ret)
1561 return ret;
1562
1563 slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
1564 DBG("found %d slot(s)\n", slots);
1565 if (slots == 0)
1566 return -ENODEV;
1567
1568 ret = pci_enable_device(pdev);
1569 if (ret)
1570 return ret;
1571
1572 chip = kzalloc(sizeof(struct sdhci_chip) +
1573 sizeof(struct sdhci_host*) * slots, GFP_KERNEL);
1574 if (!chip) {
1575 ret = -ENOMEM;
1576 goto err;
1577 }
1578
1579 chip->pdev = pdev;
1580 chip->quirks = ent->driver_data;
1581
1582 if (debug_quirks)
1583 chip->quirks = debug_quirks;
1584
1585 chip->num_slots = slots;
1586 pci_set_drvdata(pdev, chip);
1587
1588 for (i = 0;i < slots;i++) {
1589 ret = sdhci_probe_slot(pdev, i);
1590 if (ret) {
1591 for (i--;i >= 0;i--)
1592 sdhci_remove_slot(pdev, i);
1593 goto free;
1594 }
1595 }
1596
1597 return 0;
1598
1599 free:
1600 pci_set_drvdata(pdev, NULL);
1601 kfree(chip);
1602
1603 err:
1604 pci_disable_device(pdev);
1605 return ret;
1606 }
1607
1608 static void __devexit sdhci_remove(struct pci_dev *pdev)
1609 {
1610 int i;
1611 struct sdhci_chip *chip;
1612
1613 chip = pci_get_drvdata(pdev);
1614
1615 if (chip) {
1616 for (i = 0;i < chip->num_slots;i++)
1617 sdhci_remove_slot(pdev, i);
1618
1619 pci_set_drvdata(pdev, NULL);
1620
1621 kfree(chip);
1622 }
1623
1624 pci_disable_device(pdev);
1625 }
1626
1627 static struct pci_driver sdhci_driver = {
1628 .name = DRIVER_NAME,
1629 .id_table = pci_ids,
1630 .probe = sdhci_probe,
1631 .remove = __devexit_p(sdhci_remove),
1632 .suspend = sdhci_suspend,
1633 .resume = sdhci_resume,
1634 };
1635
1636 /*****************************************************************************\
1637 * *
1638 * Driver init/exit *
1639 * *
1640 \*****************************************************************************/
1641
1642 static int __init sdhci_drv_init(void)
1643 {
1644 printk(KERN_INFO DRIVER_NAME
1645 ": Secure Digital Host Controller Interface driver\n");
1646 printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
1647
1648 return pci_register_driver(&sdhci_driver);
1649 }
1650
1651 static void __exit sdhci_drv_exit(void)
1652 {
1653 DBG("Exiting\n");
1654
1655 pci_unregister_driver(&sdhci_driver);
1656 }
1657
1658 module_init(sdhci_drv_init);
1659 module_exit(sdhci_drv_exit);
1660
1661 module_param(debug_quirks, uint, 0444);
1662
1663 MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
1664 MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
1665 MODULE_LICENSE("GPL");
1666
1667 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
Verdex Pro support