arch/powerpc/include/asm/cell-regs.h

   1 /*
   2  * cbe_regs.h
   3  *
   4  * This file is intended to hold the various register definitions for CBE
   5  * on-chip system devices (memory controller, IO controller, etc...)
   6  *
   7  * (C) Copyright IBM Corporation 2001,2006
   8  *
   9  * Authors: Maximino Aguilar (maguilar@us.ibm.com)
  10  *          David J. Erb (djerb@us.ibm.com)
  11  *
  12  * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
  13  */
  14
  15 #ifndef CBE_REGS_H
  16 #define CBE_REGS_H
  17
  18 #include <asm/cell-pmu.h>
  19
  20 /*
  21  *
  22  * Some HID register definitions
  23  *
  24  */
  25
  26 /* CBE specific HID0 bits */
  27 #define HID0_CBE_THERM_WAKEUP   0x0000020000000000ul
  28 #define HID0_CBE_SYSERR_WAKEUP  0x0000008000000000ul
  29 #define HID0_CBE_THERM_INT_EN   0x0000000400000000ul
  30 #define HID0_CBE_SYSERR_INT_EN  0x0000000200000000ul
  31
  32 #define MAX_CBE         2
  33
  34 /*
  35  *
  36  * Pervasive unit register definitions
  37  *
  38  */
  39
  40 union spe_reg {
  41         u64 val;
  42         u8 spe[8];
  43 };
  44
  45 union ppe_spe_reg {
  46         u64 val;
  47         struct {
  48                 u32 ppe;
  49                 u32 spe;
  50         };
  51 };
  52
  53
  54 struct cbe_pmd_regs {
  55         /* Debug Bus Control */
  56         u64     pad_0x0000;                                     /* 0x0000 */
  57
  58         u64     group_control;                                  /* 0x0008 */
  59
  60         u8      pad_0x0010_0x00a8 [0x00a8 - 0x0010];            /* 0x0010 */
  61
  62         u64     debug_bus_control;                              /* 0x00a8 */
  63
  64         u8      pad_0x00b0_0x0100 [0x0100 - 0x00b0];            /* 0x00b0 */
  65
  66         u64     trace_aux_data;                                 /* 0x0100 */
  67         u64     trace_buffer_0_63;                              /* 0x0108 */
  68         u64     trace_buffer_64_127;                            /* 0x0110 */
  69         u64     trace_address;                                  /* 0x0118 */
  70         u64     ext_tr_timer;                                   /* 0x0120 */
  71
  72         u8      pad_0x0128_0x0400 [0x0400 - 0x0128];            /* 0x0128 */
  73
  74         /* Performance Monitor */
  75         u64     pm_status;                                      /* 0x0400 */
  76         u64     pm_control;                                     /* 0x0408 */
  77         u64     pm_interval;                                    /* 0x0410 */
  78         u64     pm_ctr[4];                                      /* 0x0418 */
  79         u64     pm_start_stop;                                  /* 0x0438 */
  80         u64     pm07_control[8];                                /* 0x0440 */
  81
  82         u8      pad_0x0480_0x0800 [0x0800 - 0x0480];            /* 0x0480 */
  83
  84         /* Thermal Sensor Registers */
  85         union   spe_reg ts_ctsr1;                               /* 0x0800 */
  86         u64     ts_ctsr2;                                       /* 0x0808 */
  87         union   spe_reg ts_mtsr1;                               /* 0x0810 */
  88         u64     ts_mtsr2;                                       /* 0x0818 */
  89         union   spe_reg ts_itr1;                                /* 0x0820 */
  90         u64     ts_itr2;                                        /* 0x0828 */
  91         u64     ts_gitr;                                        /* 0x0830 */
  92         u64     ts_isr;                                         /* 0x0838 */
  93         u64     ts_imr;                                         /* 0x0840 */
  94         union   spe_reg tm_cr1;                                 /* 0x0848 */
  95         u64     tm_cr2;                                         /* 0x0850 */
  96         u64     tm_simr;                                        /* 0x0858 */
  97         union   ppe_spe_reg tm_tpr;                             /* 0x0860 */
  98         union   spe_reg tm_str1;                                /* 0x0868 */
  99         u64     tm_str2;                                        /* 0x0870 */
 100         union   ppe_spe_reg tm_tsr;                             /* 0x0878 */
 101
 102         /* Power Management */
 103         u64     pmcr;                                           /* 0x0880 */
 104 #define CBE_PMD_PAUSE_ZERO_CONTROL      0x10000
 105         u64     pmsr;                                           /* 0x0888 */
 106
 107         /* Time Base Register */
 108         u64     tbr;                                            /* 0x0890 */
 109
 110         u8      pad_0x0898_0x0c00 [0x0c00 - 0x0898];            /* 0x0898 */
 111
 112         /* Fault Isolation Registers */
 113         u64     checkstop_fir;                                  /* 0x0c00 */
 114         u64     recoverable_fir;                                /* 0x0c08 */
 115         u64     spec_att_mchk_fir;                              /* 0x0c10 */
 116         u32     fir_mode_reg;                                   /* 0x0c18 */
 117         u8      pad_0x0c1c_0x0c20 [4];                          /* 0x0c1c */
 118 #define CBE_PMD_FIR_MODE_M8             0x00800
 119         u64     fir_enable_mask;                                /* 0x0c20 */
 120
 121         u8      pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];            /* 0x0c28 */
 122         u64     ras_esc_0;                                      /* 0x0ca8 */
 123         u8      pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];            /* 0x0cb0 */
 124 };
 125
 126 extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
 127 extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
 128
 129 /*
 130  * PMU shadow registers
 131  *
 132  * Many of the registers in the performance monitoring unit are write-only,
 133  * so we need to save a copy of what we write to those registers.
 134  *
 135  * The actual data counters are read/write. However, writing to the counters
 136  * only takes effect if the PMU is enabled. Otherwise the value is stored in
 137  * a hardware latch until the next time the PMU is enabled. So we save a copy
 138  * of the counter values if we need to read them back while the PMU is
 139  * disabled. The counter_value_in_latch field is a bitmap indicating which
 140  * counters currently have a value waiting to be written.
 141  */
 142
 143 struct cbe_pmd_shadow_regs {
 144         u32 group_control;
 145         u32 debug_bus_control;
 146         u32 trace_address;
 147         u32 ext_tr_timer;
 148         u32 pm_status;
 149         u32 pm_control;
 150         u32 pm_interval;
 151         u32 pm_start_stop;
 152         u32 pm07_control[NR_CTRS];
 153
 154         u32 pm_ctr[NR_PHYS_CTRS];
 155         u32 counter_value_in_latch;
 156 };
 157
 158 extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
 159 extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
 160
 161 /*
 162  *
 163  * IIC unit register definitions
 164  *
 165  */
 166
 167 struct cbe_iic_pending_bits {
 168         u32 data;
 169         u8 flags;
 170         u8 class;
 171         u8 source;
 172         u8 prio;
 173 };
 174
 175 #define CBE_IIC_IRQ_VALID       0x80
 176 #define CBE_IIC_IRQ_IPI         0x40
 177
 178 struct cbe_iic_thread_regs {
 179         struct cbe_iic_pending_bits pending;
 180         struct cbe_iic_pending_bits pending_destr;
 181         u64 generate;
 182         u64 prio;
 183 };
 184
 185 struct cbe_iic_regs {
 186         u8      pad_0x0000_0x0400[0x0400 - 0x0000];             /* 0x0000 */
 187
 188         /* IIC interrupt registers */
 189         struct  cbe_iic_thread_regs thread[2];                  /* 0x0400 */
 190
 191         u64     iic_ir;                                         /* 0x0440 */
 192 #define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
 193 #define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
 194 #define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
 195 #define CBE_IIC_IR_IOC_0        0x0
 196 #define CBE_IIC_IR_IOC_1S       0xb
 197 #define CBE_IIC_IR_PT_0         0xe
 198 #define CBE_IIC_IR_PT_1         0xf
 199
 200         u64     iic_is;                                         /* 0x0448 */
 201 #define CBE_IIC_IS_PMI          0x2
 202
 203         u8      pad_0x0450_0x0500[0x0500 - 0x0450];             /* 0x0450 */
 204
 205         /* IOC FIR */
 206         u64     ioc_fir_reset;                                  /* 0x0500 */
 207         u64     ioc_fir_set;                                    /* 0x0508 */
 208         u64     ioc_checkstop_enable;                           /* 0x0510 */
 209         u64     ioc_fir_error_mask;                             /* 0x0518 */
 210         u64     ioc_syserr_enable;                              /* 0x0520 */
 211         u64     ioc_fir;                                        /* 0x0528 */
 212
 213         u8      pad_0x0530_0x1000[0x1000 - 0x0530];             /* 0x0530 */
 214 };
 215
 216 extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
 217 extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
 218
 219
 220 struct cbe_mic_tm_regs {
 221         u8      pad_0x0000_0x0040[0x0040 - 0x0000];             /* 0x0000 */
 222
 223         u64     mic_ctl_cnfg2;                                  /* 0x0040 */
 224 #define CBE_MIC_ENABLE_AUX_TRC          0x8000000000000000LL
 225 #define CBE_MIC_DISABLE_PWR_SAV_2       0x0200000000000000LL
 226 #define CBE_MIC_DISABLE_AUX_TRC_WRAP    0x0100000000000000LL
 227 #define CBE_MIC_ENABLE_AUX_TRC_INT      0x0080000000000000LL
 228
 229         u64     pad_0x0048;                                     /* 0x0048 */
 230
 231         u64     mic_aux_trc_base;                               /* 0x0050 */
 232         u64     mic_aux_trc_max_addr;                           /* 0x0058 */
 233         u64     mic_aux_trc_cur_addr;                           /* 0x0060 */
 234         u64     mic_aux_trc_grf_addr;                           /* 0x0068 */
 235         u64     mic_aux_trc_grf_data;                           /* 0x0070 */
 236
 237         u64     pad_0x0078;                                     /* 0x0078 */
 238
 239         u64     mic_ctl_cnfg_0;                                 /* 0x0080 */
 240 #define CBE_MIC_DISABLE_PWR_SAV_0       0x8000000000000000LL
 241
 242         u64     pad_0x0088;                                     /* 0x0088 */
 243
 244         u64     slow_fast_timer_0;                              /* 0x0090 */
 245         u64     slow_next_timer_0;                              /* 0x0098 */
 246
 247         u8      pad_0x00a0_0x00f8[0x00f8 - 0x00a0];             /* 0x00a0 */
 248         u64     mic_df_ecc_address_0;                           /* 0x00f8 */
 249
 250         u8      pad_0x0100_0x01b8[0x01b8 - 0x0100];             /* 0x0100 */
 251         u64     mic_df_ecc_address_1;                           /* 0x01b8 */
 252
 253         u64     mic_ctl_cnfg_1;                                 /* 0x01c0 */
 254 #define CBE_MIC_DISABLE_PWR_SAV_1       0x8000000000000000LL
 255
 256         u64     pad_0x01c8;                                     /* 0x01c8 */
 257
 258         u64     slow_fast_timer_1;                              /* 0x01d0 */
 259         u64     slow_next_timer_1;                              /* 0x01d8 */
 260
 261         u8      pad_0x01e0_0x0208[0x0208 - 0x01e0];             /* 0x01e0 */
 262         u64     mic_exc;                                        /* 0x0208 */
 263 #define CBE_MIC_EXC_BLOCK_SCRUB         0x0800000000000000ULL
 264 #define CBE_MIC_EXC_FAST_SCRUB          0x0100000000000000ULL
 265
 266         u64     mic_mnt_cfg;                                    /* 0x0210 */
 267 #define CBE_MIC_MNT_CFG_CHAN_0_POP      0x0002000000000000ULL
 268 #define CBE_MIC_MNT_CFG_CHAN_1_POP      0x0004000000000000ULL
 269
 270         u64     mic_df_config;                                  /* 0x0218 */
 271 #define CBE_MIC_ECC_DISABLE_0           0x4000000000000000ULL
 272 #define CBE_MIC_ECC_REP_SINGLE_0        0x2000000000000000ULL
 273 #define CBE_MIC_ECC_DISABLE_1           0x0080000000000000ULL
 274 #define CBE_MIC_ECC_REP_SINGLE_1        0x0040000000000000ULL
 275
 276         u8      pad_0x0220_0x0230[0x0230 - 0x0220];             /* 0x0220 */
 277         u64     mic_fir;                                        /* 0x0230 */
 278 #define CBE_MIC_FIR_ECC_SINGLE_0_ERR    0x0200000000000000ULL
 279 #define CBE_MIC_FIR_ECC_MULTI_0_ERR     0x0100000000000000ULL
 280 #define CBE_MIC_FIR_ECC_SINGLE_1_ERR    0x0080000000000000ULL
 281 #define CBE_MIC_FIR_ECC_MULTI_1_ERR     0x0040000000000000ULL
 282 #define CBE_MIC_FIR_ECC_ERR_MASK        0xffff000000000000ULL
 283 #define CBE_MIC_FIR_ECC_SINGLE_0_CTE    0x0000020000000000ULL
 284 #define CBE_MIC_FIR_ECC_MULTI_0_CTE     0x0000010000000000ULL
 285 #define CBE_MIC_FIR_ECC_SINGLE_1_CTE    0x0000008000000000ULL
 286 #define CBE_MIC_FIR_ECC_MULTI_1_CTE     0x0000004000000000ULL
 287 #define CBE_MIC_FIR_ECC_CTE_MASK        0x0000ffff00000000ULL
 288 #define CBE_MIC_FIR_ECC_SINGLE_0_RESET  0x0000000002000000ULL
 289 #define CBE_MIC_FIR_ECC_MULTI_0_RESET   0x0000000001000000ULL
 290 #define CBE_MIC_FIR_ECC_SINGLE_1_RESET  0x0000000000800000ULL
 291 #define CBE_MIC_FIR_ECC_MULTI_1_RESET   0x0000000000400000ULL
 292 #define CBE_MIC_FIR_ECC_RESET_MASK      0x00000000ffff0000ULL
 293 #define CBE_MIC_FIR_ECC_SINGLE_0_SET    0x0000000000000200ULL
 294 #define CBE_MIC_FIR_ECC_MULTI_0_SET     0x0000000000000100ULL
 295 #define CBE_MIC_FIR_ECC_SINGLE_1_SET    0x0000000000000080ULL
 296 #define CBE_MIC_FIR_ECC_MULTI_1_SET     0x0000000000000040ULL
 297 #define CBE_MIC_FIR_ECC_SET_MASK        0x000000000000ffffULL
 298         u64     mic_fir_debug;                                  /* 0x0238 */
 299
 300         u8      pad_0x0240_0x1000[0x1000 - 0x0240];             /* 0x0240 */
 301 };
 302
 303 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
 304 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
 305
 306 /* some utility functions to deal with SMT */
 307 extern u32 cbe_get_hw_thread_id(int cpu);
 308 extern u32 cbe_cpu_to_node(int cpu);
 309 extern u32 cbe_node_to_cpu(int node);
 310
 311 /* Init this module early */
 312 extern void cbe_regs_init(void);
 313
 314
 315 #endif /* CBE_REGS_H */