arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm / mach-omap2 / clkt2xxx_dpllcore.c
blob8a9983cb4733dfb184e509452232605b43a24790
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * DPLL + CORE_CLK composite clock functions
5 * Copyright (C) 2005-2008 Texas Instruments, Inc.
6 * Copyright (C) 2004-2010 Nokia Corporation
8 * Contacts:
9 * Richard Woodruff <r-woodruff2@ti.com>
10 * Paul Walmsley
12 * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
13 * Gordon McNutt and RidgeRun, Inc.
15 * XXX The DPLL and CORE clocks should be split into two separate clock
16 * types.
18 #undef DEBUG
20 #include <linux/kernel.h>
21 #include <linux/errno.h>
22 #include <linux/clk.h>
23 #include <linux/io.h>
25 #include "clock.h"
26 #include "clock2xxx.h"
27 #include "opp2xxx.h"
28 #include "cm2xxx.h"
29 #include "cm-regbits-24xx.h"
30 #include "sdrc.h"
31 #include "sram.h"
33 /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
36 * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
37 * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
38 * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
40 static struct clk_hw_omap *dpll_core_ck;
42 /**
43 * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
45 * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
46 * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
47 * (the latter is unusual). This currently should be called with
48 * struct clk *dpll_ck, which is a composite clock of dpll_ck and
49 * core_ck.
51 unsigned long omap2xxx_clk_get_core_rate(void)
53 long long core_clk;
54 u32 v;
56 WARN_ON(!dpll_core_ck);
58 core_clk = omap2_get_dpll_rate(dpll_core_ck);
60 v = omap2xxx_cm_get_core_clk_src();
62 if (v == CORE_CLK_SRC_32K)
63 core_clk = 32768;
64 else
65 core_clk *= v;
67 return core_clk;
71 * Uses the current prcm set to tell if a rate is valid.
72 * You can go slower, but not faster within a given rate set.
74 static long omap2_dpllcore_round_rate(unsigned long target_rate)
76 u32 high, low, core_clk_src;
78 core_clk_src = omap2xxx_cm_get_core_clk_src();
80 if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
81 high = curr_prcm_set->dpll_speed * 2;
82 low = curr_prcm_set->dpll_speed;
83 } else { /* DPLL clockout x 2 */
84 high = curr_prcm_set->dpll_speed;
85 low = curr_prcm_set->dpll_speed / 2;
88 #ifdef DOWN_VARIABLE_DPLL
89 if (target_rate > high)
90 return high;
91 else
92 return target_rate;
93 #else
94 if (target_rate > low)
95 return high;
96 else
97 return low;
98 #endif
102 unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
103 unsigned long parent_rate)
105 return omap2xxx_clk_get_core_rate();
108 int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
109 unsigned long parent_rate)
111 struct clk_hw_omap *clk = to_clk_hw_omap(hw);
112 u32 cur_rate, low, mult, div, valid_rate, done_rate;
113 u32 bypass = 0;
114 struct prcm_config tmpset;
115 const struct dpll_data *dd;
117 cur_rate = omap2xxx_clk_get_core_rate();
118 mult = omap2xxx_cm_get_core_clk_src();
120 if ((rate == (cur_rate / 2)) && (mult == 2)) {
121 omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
122 } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
123 omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
124 } else if (rate != cur_rate) {
125 valid_rate = omap2_dpllcore_round_rate(rate);
126 if (valid_rate != rate)
127 return -EINVAL;
129 if (mult == 1)
130 low = curr_prcm_set->dpll_speed;
131 else
132 low = curr_prcm_set->dpll_speed / 2;
134 dd = clk->dpll_data;
135 if (!dd)
136 return -EINVAL;
138 tmpset.cm_clksel1_pll =
139 omap_clk_ll_ops.clk_readl(&dd->mult_div1_reg);
140 tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
141 dd->div1_mask);
142 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
143 tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
144 tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
145 if (rate > low) {
146 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
147 mult = ((rate / 2) / 1000000);
148 done_rate = CORE_CLK_SRC_DPLL_X2;
149 } else {
150 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
151 mult = (rate / 1000000);
152 done_rate = CORE_CLK_SRC_DPLL;
154 tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
155 tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
157 /* Worst case */
158 tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
160 if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
161 bypass = 1;
163 /* For omap2xxx_sdrc_init_params() */
164 omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
166 /* Force dll lock mode */
167 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
168 bypass);
170 /* Errata: ret dll entry state */
171 omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
172 omap2xxx_sdrc_reprogram(done_rate, 0);
175 return 0;
179 * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
180 * @clk: struct clk *dpll_ck
182 * Store a local copy of @clk in dpll_core_ck so other code can query
183 * the core rate without having to clk_get(), which can sleep. Must
184 * only be called once. No return value. XXX If the clock
185 * registration process is ever changed such that dpll_ck is no longer
186 * statically defined, this code may need to change to increment some
187 * kind of use count on dpll_ck.
189 void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
191 WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
192 dpll_core_ck = to_clk_hw_omap(hw);