arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 //
   3 // Device Tree file for LX2160ARDB
   4 //
   5 // Copyright 2018 NXP
   6
   7 /dts-v1/;
   8
   9 #include "fsl-lx2160a.dtsi"
  10
  11 / {
  12         model = "NXP Layerscape LX2160ARDB";
  13         compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
  14
  15         aliases {
  16                 crypto = &crypto;
  17                 serial0 = &uart0;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23
  24         sb_3v3: regulator-sb3v3 {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "MC34717-3.3VSB";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 regulator-boot-on;
  30                 regulator-always-on;
  31         };
  32 };
  33
  34 &crypto {
  35         status = "okay";
  36 };
  37
  38 &dpmac17 {
  39         phy-handle = <&rgmii_phy1>;
  40         phy-connection-type = "rgmii-id";
  41 };
  42
  43 &dpmac18 {
  44         phy-handle = <&rgmii_phy2>;
  45         phy-connection-type = "rgmii-id";
  46 };
  47
  48 &emdio1 {
  49         status = "okay";
  50
  51         rgmii_phy1: ethernet-phy@1 {
  52                 /* AR8035 PHY */
  53                 compatible = "ethernet-phy-id004d.d072";
  54                 reg = <0x1>;
  55                 eee-broken-1000t;
  56         };
  57
  58         rgmii_phy2: ethernet-phy@2 {
  59                 /* AR8035 PHY */
  60                 compatible = "ethernet-phy-id004d.d072";
  61                 reg = <0x2>;
  62                 eee-broken-1000t;
  63         };
  64 };
  65
  66 &esdhc0 {
  67         sd-uhs-sdr104;
  68         sd-uhs-sdr50;
  69         sd-uhs-sdr25;
  70         sd-uhs-sdr12;
  71         status = "okay";
  72 };
  73
  74 &esdhc1 {
  75         mmc-hs200-1_8v;
  76         mmc-hs400-1_8v;
  77         bus-width = <8>;
  78         status = "okay";
  79 };
  80
  81 &fspi {
  82         status = "okay";
  83
  84         mt35xu512aba0: flash@0 {
  85                 #address-cells = <1>;
  86                 #size-cells = <1>;
  87                 compatible = "jedec,spi-nor";
  88                 m25p,fast-read;
  89                 spi-max-frequency = <50000000>;
  90                 reg = <0>;
  91                 spi-rx-bus-width = <8>;
  92                 spi-tx-bus-width = <8>;
  93         };
  94
  95         mt35xu512aba1: flash@1 {
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98                 compatible = "jedec,spi-nor";
  99                 m25p,fast-read;
 100                 spi-max-frequency = <50000000>;
 101                 reg = <1>;
 102                 spi-rx-bus-width = <8>;
 103                 spi-tx-bus-width = <8>;
 104         };
 105 };
 106
 107 &i2c0 {
 108         status = "okay";
 109
 110         i2c-mux@77 {
 111                 compatible = "nxp,pca9547";
 112                 reg = <0x77>;
 113                 #address-cells = <1>;
 114                 #size-cells = <0>;
 115
 116                 i2c@2 {
 117                         #address-cells = <1>;
 118                         #size-cells = <0>;
 119                         reg = <0x2>;
 120
 121                         power-monitor@40 {
 122                                 compatible = "ti,ina220";
 123                                 reg = <0x40>;
 124                                 shunt-resistor = <1000>;
 125                         };
 126                 };
 127
 128                 i2c@3 {
 129                         #address-cells = <1>;
 130                         #size-cells = <0>;
 131                         reg = <0x3>;
 132
 133                         temperature-sensor@4c {
 134                                 compatible = "nxp,sa56004";
 135                                 reg = <0x4c>;
 136                                 vcc-supply = <&sb_3v3>;
 137                         };
 138
 139                         temperature-sensor@4d {
 140                                 compatible = "nxp,sa56004";
 141                                 reg = <0x4d>;
 142                                 vcc-supply = <&sb_3v3>;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &i2c4 {
 149         status = "okay";
 150
 151         rtc@51 {
 152                 compatible = "nxp,pcf2129";
 153                 reg = <0x51>;
 154                 // IRQ10_B
 155                 interrupts = <0 150 0x4>;
 156         };
 157 };
 158
 159 &sata0 {
 160         status = "okay";
 161 };
 162
 163 &sata1 {
 164         status = "okay";
 165 };
 166
 167 &sata2 {
 168         status = "okay";
 169 };
 170
 171 &sata3 {
 172         status = "okay";
 173 };
 174
 175 &uart0 {
 176         status = "okay";
 177 };
 178
 179 &uart1 {
 180         status = "okay";
 181 };
 182
 183 &usb0 {
 184         status = "okay";
 185 };
 186
 187 &usb1 {
 188         status = "okay";
 189 };