r8152: fix tx packets accounting
[linux/fpc-iii.git] / drivers / dma / pl330.c
blobfb2e7476d96b448d577d657940e32b1bd11e4282
1 /*
2 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
5 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6 * Jaswinder Singh <jassi.brar@samsung.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/scatterlist.h>
27 #include <linux/of.h>
28 #include <linux/of_dma.h>
29 #include <linux/err.h>
30 #include <linux/pm_runtime.h>
32 #include "dmaengine.h"
33 #define PL330_MAX_CHAN 8
34 #define PL330_MAX_IRQS 32
35 #define PL330_MAX_PERI 32
36 #define PL330_MAX_BURST 16
38 #define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
40 enum pl330_cachectrl {
41 CCTRL0, /* Noncacheable and nonbufferable */
42 CCTRL1, /* Bufferable only */
43 CCTRL2, /* Cacheable, but do not allocate */
44 CCTRL3, /* Cacheable and bufferable, but do not allocate */
45 INVALID1, /* AWCACHE = 0x1000 */
46 INVALID2,
47 CCTRL6, /* Cacheable write-through, allocate on writes only */
48 CCTRL7, /* Cacheable write-back, allocate on writes only */
51 enum pl330_byteswap {
52 SWAP_NO,
53 SWAP_2,
54 SWAP_4,
55 SWAP_8,
56 SWAP_16,
59 /* Register and Bit field Definitions */
60 #define DS 0x0
61 #define DS_ST_STOP 0x0
62 #define DS_ST_EXEC 0x1
63 #define DS_ST_CMISS 0x2
64 #define DS_ST_UPDTPC 0x3
65 #define DS_ST_WFE 0x4
66 #define DS_ST_ATBRR 0x5
67 #define DS_ST_QBUSY 0x6
68 #define DS_ST_WFP 0x7
69 #define DS_ST_KILL 0x8
70 #define DS_ST_CMPLT 0x9
71 #define DS_ST_FLTCMP 0xe
72 #define DS_ST_FAULT 0xf
74 #define DPC 0x4
75 #define INTEN 0x20
76 #define ES 0x24
77 #define INTSTATUS 0x28
78 #define INTCLR 0x2c
79 #define FSM 0x30
80 #define FSC 0x34
81 #define FTM 0x38
83 #define _FTC 0x40
84 #define FTC(n) (_FTC + (n)*0x4)
86 #define _CS 0x100
87 #define CS(n) (_CS + (n)*0x8)
88 #define CS_CNS (1 << 21)
90 #define _CPC 0x104
91 #define CPC(n) (_CPC + (n)*0x8)
93 #define _SA 0x400
94 #define SA(n) (_SA + (n)*0x20)
96 #define _DA 0x404
97 #define DA(n) (_DA + (n)*0x20)
99 #define _CC 0x408
100 #define CC(n) (_CC + (n)*0x20)
102 #define CC_SRCINC (1 << 0)
103 #define CC_DSTINC (1 << 14)
104 #define CC_SRCPRI (1 << 8)
105 #define CC_DSTPRI (1 << 22)
106 #define CC_SRCNS (1 << 9)
107 #define CC_DSTNS (1 << 23)
108 #define CC_SRCIA (1 << 10)
109 #define CC_DSTIA (1 << 24)
110 #define CC_SRCBRSTLEN_SHFT 4
111 #define CC_DSTBRSTLEN_SHFT 18
112 #define CC_SRCBRSTSIZE_SHFT 1
113 #define CC_DSTBRSTSIZE_SHFT 15
114 #define CC_SRCCCTRL_SHFT 11
115 #define CC_SRCCCTRL_MASK 0x7
116 #define CC_DSTCCTRL_SHFT 25
117 #define CC_DRCCCTRL_MASK 0x7
118 #define CC_SWAP_SHFT 28
120 #define _LC0 0x40c
121 #define LC0(n) (_LC0 + (n)*0x20)
123 #define _LC1 0x410
124 #define LC1(n) (_LC1 + (n)*0x20)
126 #define DBGSTATUS 0xd00
127 #define DBG_BUSY (1 << 0)
129 #define DBGCMD 0xd04
130 #define DBGINST0 0xd08
131 #define DBGINST1 0xd0c
133 #define CR0 0xe00
134 #define CR1 0xe04
135 #define CR2 0xe08
136 #define CR3 0xe0c
137 #define CR4 0xe10
138 #define CRD 0xe14
140 #define PERIPH_ID 0xfe0
141 #define PERIPH_REV_SHIFT 20
142 #define PERIPH_REV_MASK 0xf
143 #define PERIPH_REV_R0P0 0
144 #define PERIPH_REV_R1P0 1
145 #define PERIPH_REV_R1P1 2
147 #define CR0_PERIPH_REQ_SET (1 << 0)
148 #define CR0_BOOT_EN_SET (1 << 1)
149 #define CR0_BOOT_MAN_NS (1 << 2)
150 #define CR0_NUM_CHANS_SHIFT 4
151 #define CR0_NUM_CHANS_MASK 0x7
152 #define CR0_NUM_PERIPH_SHIFT 12
153 #define CR0_NUM_PERIPH_MASK 0x1f
154 #define CR0_NUM_EVENTS_SHIFT 17
155 #define CR0_NUM_EVENTS_MASK 0x1f
157 #define CR1_ICACHE_LEN_SHIFT 0
158 #define CR1_ICACHE_LEN_MASK 0x7
159 #define CR1_NUM_ICACHELINES_SHIFT 4
160 #define CR1_NUM_ICACHELINES_MASK 0xf
162 #define CRD_DATA_WIDTH_SHIFT 0
163 #define CRD_DATA_WIDTH_MASK 0x7
164 #define CRD_WR_CAP_SHIFT 4
165 #define CRD_WR_CAP_MASK 0x7
166 #define CRD_WR_Q_DEP_SHIFT 8
167 #define CRD_WR_Q_DEP_MASK 0xf
168 #define CRD_RD_CAP_SHIFT 12
169 #define CRD_RD_CAP_MASK 0x7
170 #define CRD_RD_Q_DEP_SHIFT 16
171 #define CRD_RD_Q_DEP_MASK 0xf
172 #define CRD_DATA_BUFF_SHIFT 20
173 #define CRD_DATA_BUFF_MASK 0x3ff
175 #define PART 0x330
176 #define DESIGNER 0x41
177 #define REVISION 0x0
178 #define INTEG_CFG 0x0
179 #define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
181 #define PL330_STATE_STOPPED (1 << 0)
182 #define PL330_STATE_EXECUTING (1 << 1)
183 #define PL330_STATE_WFE (1 << 2)
184 #define PL330_STATE_FAULTING (1 << 3)
185 #define PL330_STATE_COMPLETING (1 << 4)
186 #define PL330_STATE_WFP (1 << 5)
187 #define PL330_STATE_KILLING (1 << 6)
188 #define PL330_STATE_FAULT_COMPLETING (1 << 7)
189 #define PL330_STATE_CACHEMISS (1 << 8)
190 #define PL330_STATE_UPDTPC (1 << 9)
191 #define PL330_STATE_ATBARRIER (1 << 10)
192 #define PL330_STATE_QUEUEBUSY (1 << 11)
193 #define PL330_STATE_INVALID (1 << 15)
195 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
196 | PL330_STATE_WFE | PL330_STATE_FAULTING)
198 #define CMD_DMAADDH 0x54
199 #define CMD_DMAEND 0x00
200 #define CMD_DMAFLUSHP 0x35
201 #define CMD_DMAGO 0xa0
202 #define CMD_DMALD 0x04
203 #define CMD_DMALDP 0x25
204 #define CMD_DMALP 0x20
205 #define CMD_DMALPEND 0x28
206 #define CMD_DMAKILL 0x01
207 #define CMD_DMAMOV 0xbc
208 #define CMD_DMANOP 0x18
209 #define CMD_DMARMB 0x12
210 #define CMD_DMASEV 0x34
211 #define CMD_DMAST 0x08
212 #define CMD_DMASTP 0x29
213 #define CMD_DMASTZ 0x0c
214 #define CMD_DMAWFE 0x36
215 #define CMD_DMAWFP 0x30
216 #define CMD_DMAWMB 0x13
218 #define SZ_DMAADDH 3
219 #define SZ_DMAEND 1
220 #define SZ_DMAFLUSHP 2
221 #define SZ_DMALD 1
222 #define SZ_DMALDP 2
223 #define SZ_DMALP 2
224 #define SZ_DMALPEND 2
225 #define SZ_DMAKILL 1
226 #define SZ_DMAMOV 6
227 #define SZ_DMANOP 1
228 #define SZ_DMARMB 1
229 #define SZ_DMASEV 2
230 #define SZ_DMAST 1
231 #define SZ_DMASTP 2
232 #define SZ_DMASTZ 1
233 #define SZ_DMAWFE 2
234 #define SZ_DMAWFP 2
235 #define SZ_DMAWMB 1
236 #define SZ_DMAGO 6
238 #define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
239 #define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
241 #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
242 #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
245 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
246 * at 1byte/burst for P<->M and M<->M respectively.
247 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
248 * should be enough for P<->M and M<->M respectively.
250 #define MCODE_BUFF_PER_REQ 256
252 /* Use this _only_ to wait on transient states */
253 #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
255 #ifdef PL330_DEBUG_MCGEN
256 static unsigned cmd_line;
257 #define PL330_DBGCMD_DUMP(off, x...) do { \
258 printk("%x:", cmd_line); \
259 printk(x); \
260 cmd_line += off; \
261 } while (0)
262 #define PL330_DBGMC_START(addr) (cmd_line = addr)
263 #else
264 #define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
265 #define PL330_DBGMC_START(addr) do {} while (0)
266 #endif
268 /* The number of default descriptors */
270 #define NR_DEFAULT_DESC 16
272 /* Delay for runtime PM autosuspend, ms */
273 #define PL330_AUTOSUSPEND_DELAY 20
275 /* Populated by the PL330 core driver for DMA API driver's info */
276 struct pl330_config {
277 u32 periph_id;
278 #define DMAC_MODE_NS (1 << 0)
279 unsigned int mode;
280 unsigned int data_bus_width:10; /* In number of bits */
281 unsigned int data_buf_dep:11;
282 unsigned int num_chan:4;
283 unsigned int num_peri:6;
284 u32 peri_ns;
285 unsigned int num_events:6;
286 u32 irq_ns;
290 * Request Configuration.
291 * The PL330 core does not modify this and uses the last
292 * working configuration if the request doesn't provide any.
294 * The Client may want to provide this info only for the
295 * first request and a request with new settings.
297 struct pl330_reqcfg {
298 /* Address Incrementing */
299 unsigned dst_inc:1;
300 unsigned src_inc:1;
303 * For now, the SRC & DST protection levels
304 * and burst size/length are assumed same.
306 bool nonsecure;
307 bool privileged;
308 bool insnaccess;
309 unsigned brst_len:5;
310 unsigned brst_size:3; /* in power of 2 */
312 enum pl330_cachectrl dcctl;
313 enum pl330_cachectrl scctl;
314 enum pl330_byteswap swap;
315 struct pl330_config *pcfg;
319 * One cycle of DMAC operation.
320 * There may be more than one xfer in a request.
322 struct pl330_xfer {
323 u32 src_addr;
324 u32 dst_addr;
325 /* Size to xfer */
326 u32 bytes;
329 /* The xfer callbacks are made with one of these arguments. */
330 enum pl330_op_err {
331 /* The all xfers in the request were success. */
332 PL330_ERR_NONE,
333 /* If req aborted due to global error. */
334 PL330_ERR_ABORT,
335 /* If req failed due to problem with Channel. */
336 PL330_ERR_FAIL,
339 enum dmamov_dst {
340 SAR = 0,
341 CCR,
342 DAR,
345 enum pl330_dst {
346 SRC = 0,
347 DST,
350 enum pl330_cond {
351 SINGLE,
352 BURST,
353 ALWAYS,
356 struct dma_pl330_desc;
358 struct _pl330_req {
359 u32 mc_bus;
360 void *mc_cpu;
361 struct dma_pl330_desc *desc;
364 /* ToBeDone for tasklet */
365 struct _pl330_tbd {
366 bool reset_dmac;
367 bool reset_mngr;
368 u8 reset_chan;
371 /* A DMAC Thread */
372 struct pl330_thread {
373 u8 id;
374 int ev;
375 /* If the channel is not yet acquired by any client */
376 bool free;
377 /* Parent DMAC */
378 struct pl330_dmac *dmac;
379 /* Only two at a time */
380 struct _pl330_req req[2];
381 /* Index of the last enqueued request */
382 unsigned lstenq;
383 /* Index of the last submitted request or -1 if the DMA is stopped */
384 int req_running;
387 enum pl330_dmac_state {
388 UNINIT,
389 INIT,
390 DYING,
393 enum desc_status {
394 /* In the DMAC pool */
395 FREE,
397 * Allocated to some channel during prep_xxx
398 * Also may be sitting on the work_list.
400 PREP,
402 * Sitting on the work_list and already submitted
403 * to the PL330 core. Not more than two descriptors
404 * of a channel can be BUSY at any time.
406 BUSY,
408 * Sitting on the channel work_list but xfer done
409 * by PL330 core
411 DONE,
414 struct dma_pl330_chan {
415 /* Schedule desc completion */
416 struct tasklet_struct task;
418 /* DMA-Engine Channel */
419 struct dma_chan chan;
421 /* List of submitted descriptors */
422 struct list_head submitted_list;
423 /* List of issued descriptors */
424 struct list_head work_list;
425 /* List of completed descriptors */
426 struct list_head completed_list;
428 /* Pointer to the DMAC that manages this channel,
429 * NULL if the channel is available to be acquired.
430 * As the parent, this DMAC also provides descriptors
431 * to the channel.
433 struct pl330_dmac *dmac;
435 /* To protect channel manipulation */
436 spinlock_t lock;
439 * Hardware channel thread of PL330 DMAC. NULL if the channel is
440 * available.
442 struct pl330_thread *thread;
444 /* For D-to-M and M-to-D channels */
445 int burst_sz; /* the peripheral fifo width */
446 int burst_len; /* the number of burst */
447 dma_addr_t fifo_addr;
449 /* for cyclic capability */
450 bool cyclic;
452 /* for runtime pm tracking */
453 bool active;
456 struct pl330_dmac {
457 /* DMA-Engine Device */
458 struct dma_device ddma;
460 /* Holds info about sg limitations */
461 struct device_dma_parameters dma_parms;
463 /* Pool of descriptors available for the DMAC's channels */
464 struct list_head desc_pool;
465 /* To protect desc_pool manipulation */
466 spinlock_t pool_lock;
468 /* Size of MicroCode buffers for each channel. */
469 unsigned mcbufsz;
470 /* ioremap'ed address of PL330 registers. */
471 void __iomem *base;
472 /* Populated by the PL330 core driver during pl330_add */
473 struct pl330_config pcfg;
475 spinlock_t lock;
476 /* Maximum possible events/irqs */
477 int events[32];
478 /* BUS address of MicroCode buffer */
479 dma_addr_t mcode_bus;
480 /* CPU address of MicroCode buffer */
481 void *mcode_cpu;
482 /* List of all Channel threads */
483 struct pl330_thread *channels;
484 /* Pointer to the MANAGER thread */
485 struct pl330_thread *manager;
486 /* To handle bad news in interrupt */
487 struct tasklet_struct tasks;
488 struct _pl330_tbd dmac_tbd;
489 /* State of DMAC operation */
490 enum pl330_dmac_state state;
491 /* Holds list of reqs with due callbacks */
492 struct list_head req_done;
494 /* Peripheral channels connected to this DMAC */
495 unsigned int num_peripherals;
496 struct dma_pl330_chan *peripherals; /* keep at end */
497 int quirks;
500 static struct pl330_of_quirks {
501 char *quirk;
502 int id;
503 } of_quirks[] = {
505 .quirk = "arm,pl330-broken-no-flushp",
506 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
510 struct dma_pl330_desc {
511 /* To attach to a queue as child */
512 struct list_head node;
514 /* Descriptor for the DMA Engine API */
515 struct dma_async_tx_descriptor txd;
517 /* Xfer for PL330 core */
518 struct pl330_xfer px;
520 struct pl330_reqcfg rqcfg;
522 enum desc_status status;
524 int bytes_requested;
525 bool last;
527 /* The channel which currently holds this desc */
528 struct dma_pl330_chan *pchan;
530 enum dma_transfer_direction rqtype;
531 /* Index of peripheral for the xfer. */
532 unsigned peri:5;
533 /* Hook to attach to DMAC's list of reqs with due callback */
534 struct list_head rqd;
537 struct _xfer_spec {
538 u32 ccr;
539 struct dma_pl330_desc *desc;
542 static inline bool _queue_empty(struct pl330_thread *thrd)
544 return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
547 static inline bool _queue_full(struct pl330_thread *thrd)
549 return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
552 static inline bool is_manager(struct pl330_thread *thrd)
554 return thrd->dmac->manager == thrd;
557 /* If manager of the thread is in Non-Secure mode */
558 static inline bool _manager_ns(struct pl330_thread *thrd)
560 return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
563 static inline u32 get_revision(u32 periph_id)
565 return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
568 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
569 enum pl330_dst da, u16 val)
571 if (dry_run)
572 return SZ_DMAADDH;
574 buf[0] = CMD_DMAADDH;
575 buf[0] |= (da << 1);
576 *((__le16 *)&buf[1]) = cpu_to_le16(val);
578 PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
579 da == 1 ? "DA" : "SA", val);
581 return SZ_DMAADDH;
584 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
586 if (dry_run)
587 return SZ_DMAEND;
589 buf[0] = CMD_DMAEND;
591 PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
593 return SZ_DMAEND;
596 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
598 if (dry_run)
599 return SZ_DMAFLUSHP;
601 buf[0] = CMD_DMAFLUSHP;
603 peri &= 0x1f;
604 peri <<= 3;
605 buf[1] = peri;
607 PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
609 return SZ_DMAFLUSHP;
612 static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
614 if (dry_run)
615 return SZ_DMALD;
617 buf[0] = CMD_DMALD;
619 if (cond == SINGLE)
620 buf[0] |= (0 << 1) | (1 << 0);
621 else if (cond == BURST)
622 buf[0] |= (1 << 1) | (1 << 0);
624 PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
625 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
627 return SZ_DMALD;
630 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
631 enum pl330_cond cond, u8 peri)
633 if (dry_run)
634 return SZ_DMALDP;
636 buf[0] = CMD_DMALDP;
638 if (cond == BURST)
639 buf[0] |= (1 << 1);
641 peri &= 0x1f;
642 peri <<= 3;
643 buf[1] = peri;
645 PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
646 cond == SINGLE ? 'S' : 'B', peri >> 3);
648 return SZ_DMALDP;
651 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
652 unsigned loop, u8 cnt)
654 if (dry_run)
655 return SZ_DMALP;
657 buf[0] = CMD_DMALP;
659 if (loop)
660 buf[0] |= (1 << 1);
662 cnt--; /* DMAC increments by 1 internally */
663 buf[1] = cnt;
665 PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
667 return SZ_DMALP;
670 struct _arg_LPEND {
671 enum pl330_cond cond;
672 bool forever;
673 unsigned loop;
674 u8 bjump;
677 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
678 const struct _arg_LPEND *arg)
680 enum pl330_cond cond = arg->cond;
681 bool forever = arg->forever;
682 unsigned loop = arg->loop;
683 u8 bjump = arg->bjump;
685 if (dry_run)
686 return SZ_DMALPEND;
688 buf[0] = CMD_DMALPEND;
690 if (loop)
691 buf[0] |= (1 << 2);
693 if (!forever)
694 buf[0] |= (1 << 4);
696 if (cond == SINGLE)
697 buf[0] |= (0 << 1) | (1 << 0);
698 else if (cond == BURST)
699 buf[0] |= (1 << 1) | (1 << 0);
701 buf[1] = bjump;
703 PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
704 forever ? "FE" : "END",
705 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
706 loop ? '1' : '0',
707 bjump);
709 return SZ_DMALPEND;
712 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
714 if (dry_run)
715 return SZ_DMAKILL;
717 buf[0] = CMD_DMAKILL;
719 return SZ_DMAKILL;
722 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
723 enum dmamov_dst dst, u32 val)
725 if (dry_run)
726 return SZ_DMAMOV;
728 buf[0] = CMD_DMAMOV;
729 buf[1] = dst;
730 *((__le32 *)&buf[2]) = cpu_to_le32(val);
732 PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
733 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
735 return SZ_DMAMOV;
738 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
740 if (dry_run)
741 return SZ_DMANOP;
743 buf[0] = CMD_DMANOP;
745 PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
747 return SZ_DMANOP;
750 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
752 if (dry_run)
753 return SZ_DMARMB;
755 buf[0] = CMD_DMARMB;
757 PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
759 return SZ_DMARMB;
762 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
764 if (dry_run)
765 return SZ_DMASEV;
767 buf[0] = CMD_DMASEV;
769 ev &= 0x1f;
770 ev <<= 3;
771 buf[1] = ev;
773 PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
775 return SZ_DMASEV;
778 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
780 if (dry_run)
781 return SZ_DMAST;
783 buf[0] = CMD_DMAST;
785 if (cond == SINGLE)
786 buf[0] |= (0 << 1) | (1 << 0);
787 else if (cond == BURST)
788 buf[0] |= (1 << 1) | (1 << 0);
790 PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
791 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
793 return SZ_DMAST;
796 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
797 enum pl330_cond cond, u8 peri)
799 if (dry_run)
800 return SZ_DMASTP;
802 buf[0] = CMD_DMASTP;
804 if (cond == BURST)
805 buf[0] |= (1 << 1);
807 peri &= 0x1f;
808 peri <<= 3;
809 buf[1] = peri;
811 PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
812 cond == SINGLE ? 'S' : 'B', peri >> 3);
814 return SZ_DMASTP;
817 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
819 if (dry_run)
820 return SZ_DMASTZ;
822 buf[0] = CMD_DMASTZ;
824 PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
826 return SZ_DMASTZ;
829 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
830 unsigned invalidate)
832 if (dry_run)
833 return SZ_DMAWFE;
835 buf[0] = CMD_DMAWFE;
837 ev &= 0x1f;
838 ev <<= 3;
839 buf[1] = ev;
841 if (invalidate)
842 buf[1] |= (1 << 1);
844 PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
845 ev >> 3, invalidate ? ", I" : "");
847 return SZ_DMAWFE;
850 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
851 enum pl330_cond cond, u8 peri)
853 if (dry_run)
854 return SZ_DMAWFP;
856 buf[0] = CMD_DMAWFP;
858 if (cond == SINGLE)
859 buf[0] |= (0 << 1) | (0 << 0);
860 else if (cond == BURST)
861 buf[0] |= (1 << 1) | (0 << 0);
862 else
863 buf[0] |= (0 << 1) | (1 << 0);
865 peri &= 0x1f;
866 peri <<= 3;
867 buf[1] = peri;
869 PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
870 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
872 return SZ_DMAWFP;
875 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
877 if (dry_run)
878 return SZ_DMAWMB;
880 buf[0] = CMD_DMAWMB;
882 PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
884 return SZ_DMAWMB;
887 struct _arg_GO {
888 u8 chan;
889 u32 addr;
890 unsigned ns;
893 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
894 const struct _arg_GO *arg)
896 u8 chan = arg->chan;
897 u32 addr = arg->addr;
898 unsigned ns = arg->ns;
900 if (dry_run)
901 return SZ_DMAGO;
903 buf[0] = CMD_DMAGO;
904 buf[0] |= (ns << 1);
906 buf[1] = chan & 0x7;
908 *((__le32 *)&buf[2]) = cpu_to_le32(addr);
910 return SZ_DMAGO;
913 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
915 /* Returns Time-Out */
916 static bool _until_dmac_idle(struct pl330_thread *thrd)
918 void __iomem *regs = thrd->dmac->base;
919 unsigned long loops = msecs_to_loops(5);
921 do {
922 /* Until Manager is Idle */
923 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
924 break;
926 cpu_relax();
927 } while (--loops);
929 if (!loops)
930 return true;
932 return false;
935 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
936 u8 insn[], bool as_manager)
938 void __iomem *regs = thrd->dmac->base;
939 u32 val;
941 val = (insn[0] << 16) | (insn[1] << 24);
942 if (!as_manager) {
943 val |= (1 << 0);
944 val |= (thrd->id << 8); /* Channel Number */
946 writel(val, regs + DBGINST0);
948 val = le32_to_cpu(*((__le32 *)&insn[2]));
949 writel(val, regs + DBGINST1);
951 /* If timed out due to halted state-machine */
952 if (_until_dmac_idle(thrd)) {
953 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
954 return;
957 /* Get going */
958 writel(0, regs + DBGCMD);
961 static inline u32 _state(struct pl330_thread *thrd)
963 void __iomem *regs = thrd->dmac->base;
964 u32 val;
966 if (is_manager(thrd))
967 val = readl(regs + DS) & 0xf;
968 else
969 val = readl(regs + CS(thrd->id)) & 0xf;
971 switch (val) {
972 case DS_ST_STOP:
973 return PL330_STATE_STOPPED;
974 case DS_ST_EXEC:
975 return PL330_STATE_EXECUTING;
976 case DS_ST_CMISS:
977 return PL330_STATE_CACHEMISS;
978 case DS_ST_UPDTPC:
979 return PL330_STATE_UPDTPC;
980 case DS_ST_WFE:
981 return PL330_STATE_WFE;
982 case DS_ST_FAULT:
983 return PL330_STATE_FAULTING;
984 case DS_ST_ATBRR:
985 if (is_manager(thrd))
986 return PL330_STATE_INVALID;
987 else
988 return PL330_STATE_ATBARRIER;
989 case DS_ST_QBUSY:
990 if (is_manager(thrd))
991 return PL330_STATE_INVALID;
992 else
993 return PL330_STATE_QUEUEBUSY;
994 case DS_ST_WFP:
995 if (is_manager(thrd))
996 return PL330_STATE_INVALID;
997 else
998 return PL330_STATE_WFP;
999 case DS_ST_KILL:
1000 if (is_manager(thrd))
1001 return PL330_STATE_INVALID;
1002 else
1003 return PL330_STATE_KILLING;
1004 case DS_ST_CMPLT:
1005 if (is_manager(thrd))
1006 return PL330_STATE_INVALID;
1007 else
1008 return PL330_STATE_COMPLETING;
1009 case DS_ST_FLTCMP:
1010 if (is_manager(thrd))
1011 return PL330_STATE_INVALID;
1012 else
1013 return PL330_STATE_FAULT_COMPLETING;
1014 default:
1015 return PL330_STATE_INVALID;
1019 static void _stop(struct pl330_thread *thrd)
1021 void __iomem *regs = thrd->dmac->base;
1022 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1024 if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1025 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1027 /* Return if nothing needs to be done */
1028 if (_state(thrd) == PL330_STATE_COMPLETING
1029 || _state(thrd) == PL330_STATE_KILLING
1030 || _state(thrd) == PL330_STATE_STOPPED)
1031 return;
1033 _emit_KILL(0, insn);
1035 /* Stop generating interrupts for SEV */
1036 writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1038 _execute_DBGINSN(thrd, insn, is_manager(thrd));
1041 /* Start doing req 'idx' of thread 'thrd' */
1042 static bool _trigger(struct pl330_thread *thrd)
1044 void __iomem *regs = thrd->dmac->base;
1045 struct _pl330_req *req;
1046 struct dma_pl330_desc *desc;
1047 struct _arg_GO go;
1048 unsigned ns;
1049 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1050 int idx;
1052 /* Return if already ACTIVE */
1053 if (_state(thrd) != PL330_STATE_STOPPED)
1054 return true;
1056 idx = 1 - thrd->lstenq;
1057 if (thrd->req[idx].desc != NULL) {
1058 req = &thrd->req[idx];
1059 } else {
1060 idx = thrd->lstenq;
1061 if (thrd->req[idx].desc != NULL)
1062 req = &thrd->req[idx];
1063 else
1064 req = NULL;
1067 /* Return if no request */
1068 if (!req)
1069 return true;
1071 /* Return if req is running */
1072 if (idx == thrd->req_running)
1073 return true;
1075 desc = req->desc;
1077 ns = desc->rqcfg.nonsecure ? 1 : 0;
1079 /* See 'Abort Sources' point-4 at Page 2-25 */
1080 if (_manager_ns(thrd) && !ns)
1081 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1082 __func__, __LINE__);
1084 go.chan = thrd->id;
1085 go.addr = req->mc_bus;
1086 go.ns = ns;
1087 _emit_GO(0, insn, &go);
1089 /* Set to generate interrupts for SEV */
1090 writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1092 /* Only manager can execute GO */
1093 _execute_DBGINSN(thrd, insn, true);
1095 thrd->req_running = idx;
1097 return true;
1100 static bool _start(struct pl330_thread *thrd)
1102 switch (_state(thrd)) {
1103 case PL330_STATE_FAULT_COMPLETING:
1104 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1106 if (_state(thrd) == PL330_STATE_KILLING)
1107 UNTIL(thrd, PL330_STATE_STOPPED)
1109 case PL330_STATE_FAULTING:
1110 _stop(thrd);
1112 case PL330_STATE_KILLING:
1113 case PL330_STATE_COMPLETING:
1114 UNTIL(thrd, PL330_STATE_STOPPED)
1116 case PL330_STATE_STOPPED:
1117 return _trigger(thrd);
1119 case PL330_STATE_WFP:
1120 case PL330_STATE_QUEUEBUSY:
1121 case PL330_STATE_ATBARRIER:
1122 case PL330_STATE_UPDTPC:
1123 case PL330_STATE_CACHEMISS:
1124 case PL330_STATE_EXECUTING:
1125 return true;
1127 case PL330_STATE_WFE: /* For RESUME, nothing yet */
1128 default:
1129 return false;
1133 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1134 const struct _xfer_spec *pxs, int cyc)
1136 int off = 0;
1137 struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1139 /* check lock-up free version */
1140 if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1141 while (cyc--) {
1142 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1143 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1145 } else {
1146 while (cyc--) {
1147 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1148 off += _emit_RMB(dry_run, &buf[off]);
1149 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1150 off += _emit_WMB(dry_run, &buf[off]);
1154 return off;
1157 static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
1158 u8 buf[], const struct _xfer_spec *pxs,
1159 int cyc)
1161 int off = 0;
1162 enum pl330_cond cond;
1164 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1165 cond = BURST;
1166 else
1167 cond = SINGLE;
1169 while (cyc--) {
1170 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1171 off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
1172 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1174 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1175 off += _emit_FLUSHP(dry_run, &buf[off],
1176 pxs->desc->peri);
1179 return off;
1182 static inline int _ldst_memtodev(struct pl330_dmac *pl330,
1183 unsigned dry_run, u8 buf[],
1184 const struct _xfer_spec *pxs, int cyc)
1186 int off = 0;
1187 enum pl330_cond cond;
1189 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1190 cond = BURST;
1191 else
1192 cond = SINGLE;
1194 while (cyc--) {
1195 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1196 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1197 off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
1199 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1200 off += _emit_FLUSHP(dry_run, &buf[off],
1201 pxs->desc->peri);
1204 return off;
1207 static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1208 const struct _xfer_spec *pxs, int cyc)
1210 int off = 0;
1212 switch (pxs->desc->rqtype) {
1213 case DMA_MEM_TO_DEV:
1214 off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
1215 break;
1216 case DMA_DEV_TO_MEM:
1217 off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
1218 break;
1219 case DMA_MEM_TO_MEM:
1220 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1221 break;
1222 default:
1223 off += 0x40000000; /* Scare off the Client */
1224 break;
1227 return off;
1230 /* Returns bytes consumed and updates bursts */
1231 static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1232 unsigned long *bursts, const struct _xfer_spec *pxs)
1234 int cyc, cycmax, szlp, szlpend, szbrst, off;
1235 unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1236 struct _arg_LPEND lpend;
1238 if (*bursts == 1)
1239 return _bursts(pl330, dry_run, buf, pxs, 1);
1241 /* Max iterations possible in DMALP is 256 */
1242 if (*bursts >= 256*256) {
1243 lcnt1 = 256;
1244 lcnt0 = 256;
1245 cyc = *bursts / lcnt1 / lcnt0;
1246 } else if (*bursts > 256) {
1247 lcnt1 = 256;
1248 lcnt0 = *bursts / lcnt1;
1249 cyc = 1;
1250 } else {
1251 lcnt1 = *bursts;
1252 lcnt0 = 0;
1253 cyc = 1;
1256 szlp = _emit_LP(1, buf, 0, 0);
1257 szbrst = _bursts(pl330, 1, buf, pxs, 1);
1259 lpend.cond = ALWAYS;
1260 lpend.forever = false;
1261 lpend.loop = 0;
1262 lpend.bjump = 0;
1263 szlpend = _emit_LPEND(1, buf, &lpend);
1265 if (lcnt0) {
1266 szlp *= 2;
1267 szlpend *= 2;
1271 * Max bursts that we can unroll due to limit on the
1272 * size of backward jump that can be encoded in DMALPEND
1273 * which is 8-bits and hence 255
1275 cycmax = (255 - (szlp + szlpend)) / szbrst;
1277 cyc = (cycmax < cyc) ? cycmax : cyc;
1279 off = 0;
1281 if (lcnt0) {
1282 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1283 ljmp0 = off;
1286 off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1287 ljmp1 = off;
1289 off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1291 lpend.cond = ALWAYS;
1292 lpend.forever = false;
1293 lpend.loop = 1;
1294 lpend.bjump = off - ljmp1;
1295 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1297 if (lcnt0) {
1298 lpend.cond = ALWAYS;
1299 lpend.forever = false;
1300 lpend.loop = 0;
1301 lpend.bjump = off - ljmp0;
1302 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1305 *bursts = lcnt1 * cyc;
1306 if (lcnt0)
1307 *bursts *= lcnt0;
1309 return off;
1312 static inline int _setup_loops(struct pl330_dmac *pl330,
1313 unsigned dry_run, u8 buf[],
1314 const struct _xfer_spec *pxs)
1316 struct pl330_xfer *x = &pxs->desc->px;
1317 u32 ccr = pxs->ccr;
1318 unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1319 int off = 0;
1321 while (bursts) {
1322 c = bursts;
1323 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1324 bursts -= c;
1327 return off;
1330 static inline int _setup_xfer(struct pl330_dmac *pl330,
1331 unsigned dry_run, u8 buf[],
1332 const struct _xfer_spec *pxs)
1334 struct pl330_xfer *x = &pxs->desc->px;
1335 int off = 0;
1337 /* DMAMOV SAR, x->src_addr */
1338 off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1339 /* DMAMOV DAR, x->dst_addr */
1340 off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1342 /* Setup Loop(s) */
1343 off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1345 return off;
1349 * A req is a sequence of one or more xfer units.
1350 * Returns the number of bytes taken to setup the MC for the req.
1352 static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1353 struct pl330_thread *thrd, unsigned index,
1354 struct _xfer_spec *pxs)
1356 struct _pl330_req *req = &thrd->req[index];
1357 struct pl330_xfer *x;
1358 u8 *buf = req->mc_cpu;
1359 int off = 0;
1361 PL330_DBGMC_START(req->mc_bus);
1363 /* DMAMOV CCR, ccr */
1364 off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1366 x = &pxs->desc->px;
1367 /* Error if xfer length is not aligned at burst size */
1368 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1369 return -EINVAL;
1371 off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1373 /* DMASEV peripheral/event */
1374 off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1375 /* DMAEND */
1376 off += _emit_END(dry_run, &buf[off]);
1378 return off;
1381 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1383 u32 ccr = 0;
1385 if (rqc->src_inc)
1386 ccr |= CC_SRCINC;
1388 if (rqc->dst_inc)
1389 ccr |= CC_DSTINC;
1391 /* We set same protection levels for Src and DST for now */
1392 if (rqc->privileged)
1393 ccr |= CC_SRCPRI | CC_DSTPRI;
1394 if (rqc->nonsecure)
1395 ccr |= CC_SRCNS | CC_DSTNS;
1396 if (rqc->insnaccess)
1397 ccr |= CC_SRCIA | CC_DSTIA;
1399 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1400 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1402 ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1403 ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1405 ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1406 ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1408 ccr |= (rqc->swap << CC_SWAP_SHFT);
1410 return ccr;
1414 * Submit a list of xfers after which the client wants notification.
1415 * Client is not notified after each xfer unit, just once after all
1416 * xfer units are done or some error occurs.
1418 static int pl330_submit_req(struct pl330_thread *thrd,
1419 struct dma_pl330_desc *desc)
1421 struct pl330_dmac *pl330 = thrd->dmac;
1422 struct _xfer_spec xs;
1423 unsigned long flags;
1424 unsigned idx;
1425 u32 ccr;
1426 int ret = 0;
1428 if (pl330->state == DYING
1429 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1430 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1431 __func__, __LINE__);
1432 return -EAGAIN;
1435 /* If request for non-existing peripheral */
1436 if (desc->rqtype != DMA_MEM_TO_MEM &&
1437 desc->peri >= pl330->pcfg.num_peri) {
1438 dev_info(thrd->dmac->ddma.dev,
1439 "%s:%d Invalid peripheral(%u)!\n",
1440 __func__, __LINE__, desc->peri);
1441 return -EINVAL;
1444 spin_lock_irqsave(&pl330->lock, flags);
1446 if (_queue_full(thrd)) {
1447 ret = -EAGAIN;
1448 goto xfer_exit;
1451 /* Prefer Secure Channel */
1452 if (!_manager_ns(thrd))
1453 desc->rqcfg.nonsecure = 0;
1454 else
1455 desc->rqcfg.nonsecure = 1;
1457 ccr = _prepare_ccr(&desc->rqcfg);
1459 idx = thrd->req[0].desc == NULL ? 0 : 1;
1461 xs.ccr = ccr;
1462 xs.desc = desc;
1464 /* First dry run to check if req is acceptable */
1465 ret = _setup_req(pl330, 1, thrd, idx, &xs);
1466 if (ret < 0)
1467 goto xfer_exit;
1469 if (ret > pl330->mcbufsz / 2) {
1470 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1471 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1472 ret = -ENOMEM;
1473 goto xfer_exit;
1476 /* Hook the request */
1477 thrd->lstenq = idx;
1478 thrd->req[idx].desc = desc;
1479 _setup_req(pl330, 0, thrd, idx, &xs);
1481 ret = 0;
1483 xfer_exit:
1484 spin_unlock_irqrestore(&pl330->lock, flags);
1486 return ret;
1489 static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1491 struct dma_pl330_chan *pch;
1492 unsigned long flags;
1494 if (!desc)
1495 return;
1497 pch = desc->pchan;
1499 /* If desc aborted */
1500 if (!pch)
1501 return;
1503 spin_lock_irqsave(&pch->lock, flags);
1505 desc->status = DONE;
1507 spin_unlock_irqrestore(&pch->lock, flags);
1509 tasklet_schedule(&pch->task);
1512 static void pl330_dotask(unsigned long data)
1514 struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1515 unsigned long flags;
1516 int i;
1518 spin_lock_irqsave(&pl330->lock, flags);
1520 /* The DMAC itself gone nuts */
1521 if (pl330->dmac_tbd.reset_dmac) {
1522 pl330->state = DYING;
1523 /* Reset the manager too */
1524 pl330->dmac_tbd.reset_mngr = true;
1525 /* Clear the reset flag */
1526 pl330->dmac_tbd.reset_dmac = false;
1529 if (pl330->dmac_tbd.reset_mngr) {
1530 _stop(pl330->manager);
1531 /* Reset all channels */
1532 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1533 /* Clear the reset flag */
1534 pl330->dmac_tbd.reset_mngr = false;
1537 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1539 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1540 struct pl330_thread *thrd = &pl330->channels[i];
1541 void __iomem *regs = pl330->base;
1542 enum pl330_op_err err;
1544 _stop(thrd);
1546 if (readl(regs + FSC) & (1 << thrd->id))
1547 err = PL330_ERR_FAIL;
1548 else
1549 err = PL330_ERR_ABORT;
1551 spin_unlock_irqrestore(&pl330->lock, flags);
1552 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1553 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1554 spin_lock_irqsave(&pl330->lock, flags);
1556 thrd->req[0].desc = NULL;
1557 thrd->req[1].desc = NULL;
1558 thrd->req_running = -1;
1560 /* Clear the reset flag */
1561 pl330->dmac_tbd.reset_chan &= ~(1 << i);
1565 spin_unlock_irqrestore(&pl330->lock, flags);
1567 return;
1570 /* Returns 1 if state was updated, 0 otherwise */
1571 static int pl330_update(struct pl330_dmac *pl330)
1573 struct dma_pl330_desc *descdone, *tmp;
1574 unsigned long flags;
1575 void __iomem *regs;
1576 u32 val;
1577 int id, ev, ret = 0;
1579 regs = pl330->base;
1581 spin_lock_irqsave(&pl330->lock, flags);
1583 val = readl(regs + FSM) & 0x1;
1584 if (val)
1585 pl330->dmac_tbd.reset_mngr = true;
1586 else
1587 pl330->dmac_tbd.reset_mngr = false;
1589 val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1590 pl330->dmac_tbd.reset_chan |= val;
1591 if (val) {
1592 int i = 0;
1593 while (i < pl330->pcfg.num_chan) {
1594 if (val & (1 << i)) {
1595 dev_info(pl330->ddma.dev,
1596 "Reset Channel-%d\t CS-%x FTC-%x\n",
1597 i, readl(regs + CS(i)),
1598 readl(regs + FTC(i)));
1599 _stop(&pl330->channels[i]);
1601 i++;
1605 /* Check which event happened i.e, thread notified */
1606 val = readl(regs + ES);
1607 if (pl330->pcfg.num_events < 32
1608 && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1609 pl330->dmac_tbd.reset_dmac = true;
1610 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1611 __LINE__);
1612 ret = 1;
1613 goto updt_exit;
1616 for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1617 if (val & (1 << ev)) { /* Event occurred */
1618 struct pl330_thread *thrd;
1619 u32 inten = readl(regs + INTEN);
1620 int active;
1622 /* Clear the event */
1623 if (inten & (1 << ev))
1624 writel(1 << ev, regs + INTCLR);
1626 ret = 1;
1628 id = pl330->events[ev];
1630 thrd = &pl330->channels[id];
1632 active = thrd->req_running;
1633 if (active == -1) /* Aborted */
1634 continue;
1636 /* Detach the req */
1637 descdone = thrd->req[active].desc;
1638 thrd->req[active].desc = NULL;
1640 thrd->req_running = -1;
1642 /* Get going again ASAP */
1643 _start(thrd);
1645 /* For now, just make a list of callbacks to be done */
1646 list_add_tail(&descdone->rqd, &pl330->req_done);
1650 /* Now that we are in no hurry, do the callbacks */
1651 list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
1652 list_del(&descdone->rqd);
1653 spin_unlock_irqrestore(&pl330->lock, flags);
1654 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1655 spin_lock_irqsave(&pl330->lock, flags);
1658 updt_exit:
1659 spin_unlock_irqrestore(&pl330->lock, flags);
1661 if (pl330->dmac_tbd.reset_dmac
1662 || pl330->dmac_tbd.reset_mngr
1663 || pl330->dmac_tbd.reset_chan) {
1664 ret = 1;
1665 tasklet_schedule(&pl330->tasks);
1668 return ret;
1671 /* Reserve an event */
1672 static inline int _alloc_event(struct pl330_thread *thrd)
1674 struct pl330_dmac *pl330 = thrd->dmac;
1675 int ev;
1677 for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1678 if (pl330->events[ev] == -1) {
1679 pl330->events[ev] = thrd->id;
1680 return ev;
1683 return -1;
1686 static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1688 return pl330->pcfg.irq_ns & (1 << i);
1691 /* Upon success, returns IdentityToken for the
1692 * allocated channel, NULL otherwise.
1694 static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1696 struct pl330_thread *thrd = NULL;
1697 int chans, i;
1699 if (pl330->state == DYING)
1700 return NULL;
1702 chans = pl330->pcfg.num_chan;
1704 for (i = 0; i < chans; i++) {
1705 thrd = &pl330->channels[i];
1706 if ((thrd->free) && (!_manager_ns(thrd) ||
1707 _chan_ns(pl330, i))) {
1708 thrd->ev = _alloc_event(thrd);
1709 if (thrd->ev >= 0) {
1710 thrd->free = false;
1711 thrd->lstenq = 1;
1712 thrd->req[0].desc = NULL;
1713 thrd->req[1].desc = NULL;
1714 thrd->req_running = -1;
1715 break;
1718 thrd = NULL;
1721 return thrd;
1724 /* Release an event */
1725 static inline void _free_event(struct pl330_thread *thrd, int ev)
1727 struct pl330_dmac *pl330 = thrd->dmac;
1729 /* If the event is valid and was held by the thread */
1730 if (ev >= 0 && ev < pl330->pcfg.num_events
1731 && pl330->events[ev] == thrd->id)
1732 pl330->events[ev] = -1;
1735 static void pl330_release_channel(struct pl330_thread *thrd)
1737 struct pl330_dmac *pl330;
1739 if (!thrd || thrd->free)
1740 return;
1742 _stop(thrd);
1744 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1745 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1747 pl330 = thrd->dmac;
1749 _free_event(thrd, thrd->ev);
1750 thrd->free = true;
1753 /* Initialize the structure for PL330 configuration, that can be used
1754 * by the client driver the make best use of the DMAC
1756 static void read_dmac_config(struct pl330_dmac *pl330)
1758 void __iomem *regs = pl330->base;
1759 u32 val;
1761 val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1762 val &= CRD_DATA_WIDTH_MASK;
1763 pl330->pcfg.data_bus_width = 8 * (1 << val);
1765 val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1766 val &= CRD_DATA_BUFF_MASK;
1767 pl330->pcfg.data_buf_dep = val + 1;
1769 val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1770 val &= CR0_NUM_CHANS_MASK;
1771 val += 1;
1772 pl330->pcfg.num_chan = val;
1774 val = readl(regs + CR0);
1775 if (val & CR0_PERIPH_REQ_SET) {
1776 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1777 val += 1;
1778 pl330->pcfg.num_peri = val;
1779 pl330->pcfg.peri_ns = readl(regs + CR4);
1780 } else {
1781 pl330->pcfg.num_peri = 0;
1784 val = readl(regs + CR0);
1785 if (val & CR0_BOOT_MAN_NS)
1786 pl330->pcfg.mode |= DMAC_MODE_NS;
1787 else
1788 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1790 val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1791 val &= CR0_NUM_EVENTS_MASK;
1792 val += 1;
1793 pl330->pcfg.num_events = val;
1795 pl330->pcfg.irq_ns = readl(regs + CR3);
1798 static inline void _reset_thread(struct pl330_thread *thrd)
1800 struct pl330_dmac *pl330 = thrd->dmac;
1802 thrd->req[0].mc_cpu = pl330->mcode_cpu
1803 + (thrd->id * pl330->mcbufsz);
1804 thrd->req[0].mc_bus = pl330->mcode_bus
1805 + (thrd->id * pl330->mcbufsz);
1806 thrd->req[0].desc = NULL;
1808 thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1809 + pl330->mcbufsz / 2;
1810 thrd->req[1].mc_bus = thrd->req[0].mc_bus
1811 + pl330->mcbufsz / 2;
1812 thrd->req[1].desc = NULL;
1814 thrd->req_running = -1;
1817 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1819 int chans = pl330->pcfg.num_chan;
1820 struct pl330_thread *thrd;
1821 int i;
1823 /* Allocate 1 Manager and 'chans' Channel threads */
1824 pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1825 GFP_KERNEL);
1826 if (!pl330->channels)
1827 return -ENOMEM;
1829 /* Init Channel threads */
1830 for (i = 0; i < chans; i++) {
1831 thrd = &pl330->channels[i];
1832 thrd->id = i;
1833 thrd->dmac = pl330;
1834 _reset_thread(thrd);
1835 thrd->free = true;
1838 /* MANAGER is indexed at the end */
1839 thrd = &pl330->channels[chans];
1840 thrd->id = chans;
1841 thrd->dmac = pl330;
1842 thrd->free = false;
1843 pl330->manager = thrd;
1845 return 0;
1848 static int dmac_alloc_resources(struct pl330_dmac *pl330)
1850 int chans = pl330->pcfg.num_chan;
1851 int ret;
1854 * Alloc MicroCode buffer for 'chans' Channel threads.
1855 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1857 pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
1858 chans * pl330->mcbufsz,
1859 &pl330->mcode_bus, GFP_KERNEL);
1860 if (!pl330->mcode_cpu) {
1861 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1862 __func__, __LINE__);
1863 return -ENOMEM;
1866 ret = dmac_alloc_threads(pl330);
1867 if (ret) {
1868 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1869 __func__, __LINE__);
1870 dma_free_coherent(pl330->ddma.dev,
1871 chans * pl330->mcbufsz,
1872 pl330->mcode_cpu, pl330->mcode_bus);
1873 return ret;
1876 return 0;
1879 static int pl330_add(struct pl330_dmac *pl330)
1881 void __iomem *regs;
1882 int i, ret;
1884 regs = pl330->base;
1886 /* Check if we can handle this DMAC */
1887 if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1888 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1889 pl330->pcfg.periph_id);
1890 return -EINVAL;
1893 /* Read the configuration of the DMAC */
1894 read_dmac_config(pl330);
1896 if (pl330->pcfg.num_events == 0) {
1897 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1898 __func__, __LINE__);
1899 return -EINVAL;
1902 spin_lock_init(&pl330->lock);
1904 INIT_LIST_HEAD(&pl330->req_done);
1906 /* Use default MC buffer size if not provided */
1907 if (!pl330->mcbufsz)
1908 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1910 /* Mark all events as free */
1911 for (i = 0; i < pl330->pcfg.num_events; i++)
1912 pl330->events[i] = -1;
1914 /* Allocate resources needed by the DMAC */
1915 ret = dmac_alloc_resources(pl330);
1916 if (ret) {
1917 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1918 return ret;
1921 tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1923 pl330->state = INIT;
1925 return 0;
1928 static int dmac_free_threads(struct pl330_dmac *pl330)
1930 struct pl330_thread *thrd;
1931 int i;
1933 /* Release Channel threads */
1934 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1935 thrd = &pl330->channels[i];
1936 pl330_release_channel(thrd);
1939 /* Free memory */
1940 kfree(pl330->channels);
1942 return 0;
1945 static void pl330_del(struct pl330_dmac *pl330)
1947 pl330->state = UNINIT;
1949 tasklet_kill(&pl330->tasks);
1951 /* Free DMAC resources */
1952 dmac_free_threads(pl330);
1954 dma_free_coherent(pl330->ddma.dev,
1955 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1956 pl330->mcode_bus);
1959 /* forward declaration */
1960 static struct amba_driver pl330_driver;
1962 static inline struct dma_pl330_chan *
1963 to_pchan(struct dma_chan *ch)
1965 if (!ch)
1966 return NULL;
1968 return container_of(ch, struct dma_pl330_chan, chan);
1971 static inline struct dma_pl330_desc *
1972 to_desc(struct dma_async_tx_descriptor *tx)
1974 return container_of(tx, struct dma_pl330_desc, txd);
1977 static inline void fill_queue(struct dma_pl330_chan *pch)
1979 struct dma_pl330_desc *desc;
1980 int ret;
1982 list_for_each_entry(desc, &pch->work_list, node) {
1984 /* If already submitted */
1985 if (desc->status == BUSY)
1986 continue;
1988 ret = pl330_submit_req(pch->thread, desc);
1989 if (!ret) {
1990 desc->status = BUSY;
1991 } else if (ret == -EAGAIN) {
1992 /* QFull or DMAC Dying */
1993 break;
1994 } else {
1995 /* Unacceptable request */
1996 desc->status = DONE;
1997 dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
1998 __func__, __LINE__, desc->txd.cookie);
1999 tasklet_schedule(&pch->task);
2004 static void pl330_tasklet(unsigned long data)
2006 struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2007 struct dma_pl330_desc *desc, *_dt;
2008 unsigned long flags;
2009 bool power_down = false;
2011 spin_lock_irqsave(&pch->lock, flags);
2013 /* Pick up ripe tomatoes */
2014 list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2015 if (desc->status == DONE) {
2016 if (!pch->cyclic)
2017 dma_cookie_complete(&desc->txd);
2018 list_move_tail(&desc->node, &pch->completed_list);
2021 /* Try to submit a req imm. next to the last completed cookie */
2022 fill_queue(pch);
2024 if (list_empty(&pch->work_list)) {
2025 spin_lock(&pch->thread->dmac->lock);
2026 _stop(pch->thread);
2027 spin_unlock(&pch->thread->dmac->lock);
2028 power_down = true;
2029 pch->active = false;
2030 } else {
2031 /* Make sure the PL330 Channel thread is active */
2032 spin_lock(&pch->thread->dmac->lock);
2033 _start(pch->thread);
2034 spin_unlock(&pch->thread->dmac->lock);
2037 while (!list_empty(&pch->completed_list)) {
2038 struct dmaengine_desc_callback cb;
2040 desc = list_first_entry(&pch->completed_list,
2041 struct dma_pl330_desc, node);
2043 dmaengine_desc_get_callback(&desc->txd, &cb);
2045 if (pch->cyclic) {
2046 desc->status = PREP;
2047 list_move_tail(&desc->node, &pch->work_list);
2048 if (power_down) {
2049 pch->active = true;
2050 spin_lock(&pch->thread->dmac->lock);
2051 _start(pch->thread);
2052 spin_unlock(&pch->thread->dmac->lock);
2053 power_down = false;
2055 } else {
2056 desc->status = FREE;
2057 list_move_tail(&desc->node, &pch->dmac->desc_pool);
2060 dma_descriptor_unmap(&desc->txd);
2062 if (dmaengine_desc_callback_valid(&cb)) {
2063 spin_unlock_irqrestore(&pch->lock, flags);
2064 dmaengine_desc_callback_invoke(&cb, NULL);
2065 spin_lock_irqsave(&pch->lock, flags);
2068 spin_unlock_irqrestore(&pch->lock, flags);
2070 /* If work list empty, power down */
2071 if (power_down) {
2072 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2073 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2077 bool pl330_filter(struct dma_chan *chan, void *param)
2079 u8 *peri_id;
2081 if (chan->device->dev->driver != &pl330_driver.drv)
2082 return false;
2084 peri_id = chan->private;
2085 return *peri_id == (unsigned long)param;
2087 EXPORT_SYMBOL(pl330_filter);
2089 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2090 struct of_dma *ofdma)
2092 int count = dma_spec->args_count;
2093 struct pl330_dmac *pl330 = ofdma->of_dma_data;
2094 unsigned int chan_id;
2096 if (!pl330)
2097 return NULL;
2099 if (count != 1)
2100 return NULL;
2102 chan_id = dma_spec->args[0];
2103 if (chan_id >= pl330->num_peripherals)
2104 return NULL;
2106 return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2109 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2111 struct dma_pl330_chan *pch = to_pchan(chan);
2112 struct pl330_dmac *pl330 = pch->dmac;
2113 unsigned long flags;
2115 spin_lock_irqsave(&pl330->lock, flags);
2117 dma_cookie_init(chan);
2118 pch->cyclic = false;
2120 pch->thread = pl330_request_channel(pl330);
2121 if (!pch->thread) {
2122 spin_unlock_irqrestore(&pl330->lock, flags);
2123 return -ENOMEM;
2126 tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2128 spin_unlock_irqrestore(&pl330->lock, flags);
2130 return 1;
2133 static int pl330_config(struct dma_chan *chan,
2134 struct dma_slave_config *slave_config)
2136 struct dma_pl330_chan *pch = to_pchan(chan);
2138 if (slave_config->direction == DMA_MEM_TO_DEV) {
2139 if (slave_config->dst_addr)
2140 pch->fifo_addr = slave_config->dst_addr;
2141 if (slave_config->dst_addr_width)
2142 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2143 if (slave_config->dst_maxburst)
2144 pch->burst_len = slave_config->dst_maxburst;
2145 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2146 if (slave_config->src_addr)
2147 pch->fifo_addr = slave_config->src_addr;
2148 if (slave_config->src_addr_width)
2149 pch->burst_sz = __ffs(slave_config->src_addr_width);
2150 if (slave_config->src_maxburst)
2151 pch->burst_len = slave_config->src_maxburst;
2154 return 0;
2157 static int pl330_terminate_all(struct dma_chan *chan)
2159 struct dma_pl330_chan *pch = to_pchan(chan);
2160 struct dma_pl330_desc *desc;
2161 unsigned long flags;
2162 struct pl330_dmac *pl330 = pch->dmac;
2163 LIST_HEAD(list);
2164 bool power_down = false;
2166 pm_runtime_get_sync(pl330->ddma.dev);
2167 spin_lock_irqsave(&pch->lock, flags);
2168 spin_lock(&pl330->lock);
2169 _stop(pch->thread);
2170 spin_unlock(&pl330->lock);
2172 pch->thread->req[0].desc = NULL;
2173 pch->thread->req[1].desc = NULL;
2174 pch->thread->req_running = -1;
2175 power_down = pch->active;
2176 pch->active = false;
2178 /* Mark all desc done */
2179 list_for_each_entry(desc, &pch->submitted_list, node) {
2180 desc->status = FREE;
2181 dma_cookie_complete(&desc->txd);
2184 list_for_each_entry(desc, &pch->work_list , node) {
2185 desc->status = FREE;
2186 dma_cookie_complete(&desc->txd);
2189 list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2190 list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2191 list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2192 spin_unlock_irqrestore(&pch->lock, flags);
2193 pm_runtime_mark_last_busy(pl330->ddma.dev);
2194 if (power_down)
2195 pm_runtime_put_autosuspend(pl330->ddma.dev);
2196 pm_runtime_put_autosuspend(pl330->ddma.dev);
2198 return 0;
2202 * We don't support DMA_RESUME command because of hardware
2203 * limitations, so after pausing the channel we cannot restore
2204 * it to active state. We have to terminate channel and setup
2205 * DMA transfer again. This pause feature was implemented to
2206 * allow safely read residue before channel termination.
2208 static int pl330_pause(struct dma_chan *chan)
2210 struct dma_pl330_chan *pch = to_pchan(chan);
2211 struct pl330_dmac *pl330 = pch->dmac;
2212 unsigned long flags;
2214 pm_runtime_get_sync(pl330->ddma.dev);
2215 spin_lock_irqsave(&pch->lock, flags);
2217 spin_lock(&pl330->lock);
2218 _stop(pch->thread);
2219 spin_unlock(&pl330->lock);
2221 spin_unlock_irqrestore(&pch->lock, flags);
2222 pm_runtime_mark_last_busy(pl330->ddma.dev);
2223 pm_runtime_put_autosuspend(pl330->ddma.dev);
2225 return 0;
2228 static void pl330_free_chan_resources(struct dma_chan *chan)
2230 struct dma_pl330_chan *pch = to_pchan(chan);
2231 struct pl330_dmac *pl330 = pch->dmac;
2232 unsigned long flags;
2234 tasklet_kill(&pch->task);
2236 pm_runtime_get_sync(pch->dmac->ddma.dev);
2237 spin_lock_irqsave(&pl330->lock, flags);
2239 pl330_release_channel(pch->thread);
2240 pch->thread = NULL;
2242 if (pch->cyclic)
2243 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2245 spin_unlock_irqrestore(&pl330->lock, flags);
2246 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2247 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2250 static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2251 struct dma_pl330_desc *desc)
2253 struct pl330_thread *thrd = pch->thread;
2254 struct pl330_dmac *pl330 = pch->dmac;
2255 void __iomem *regs = thrd->dmac->base;
2256 u32 val, addr;
2258 pm_runtime_get_sync(pl330->ddma.dev);
2259 val = addr = 0;
2260 if (desc->rqcfg.src_inc) {
2261 val = readl(regs + SA(thrd->id));
2262 addr = desc->px.src_addr;
2263 } else {
2264 val = readl(regs + DA(thrd->id));
2265 addr = desc->px.dst_addr;
2267 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2268 pm_runtime_put_autosuspend(pl330->ddma.dev);
2269 return val - addr;
2272 static enum dma_status
2273 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2274 struct dma_tx_state *txstate)
2276 enum dma_status ret;
2277 unsigned long flags;
2278 struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2279 struct dma_pl330_chan *pch = to_pchan(chan);
2280 unsigned int transferred, residual = 0;
2282 ret = dma_cookie_status(chan, cookie, txstate);
2284 if (!txstate)
2285 return ret;
2287 if (ret == DMA_COMPLETE)
2288 goto out;
2290 spin_lock_irqsave(&pch->lock, flags);
2291 spin_lock(&pch->thread->dmac->lock);
2293 if (pch->thread->req_running != -1)
2294 running = pch->thread->req[pch->thread->req_running].desc;
2296 last_enq = pch->thread->req[pch->thread->lstenq].desc;
2298 /* Check in pending list */
2299 list_for_each_entry(desc, &pch->work_list, node) {
2300 if (desc->status == DONE)
2301 transferred = desc->bytes_requested;
2302 else if (running && desc == running)
2303 transferred =
2304 pl330_get_current_xferred_count(pch, desc);
2305 else if (desc->status == BUSY)
2307 * Busy but not running means either just enqueued,
2308 * or finished and not yet marked done
2310 if (desc == last_enq)
2311 transferred = 0;
2312 else
2313 transferred = desc->bytes_requested;
2314 else
2315 transferred = 0;
2316 residual += desc->bytes_requested - transferred;
2317 if (desc->txd.cookie == cookie) {
2318 switch (desc->status) {
2319 case DONE:
2320 ret = DMA_COMPLETE;
2321 break;
2322 case PREP:
2323 case BUSY:
2324 ret = DMA_IN_PROGRESS;
2325 break;
2326 default:
2327 WARN_ON(1);
2329 break;
2331 if (desc->last)
2332 residual = 0;
2334 spin_unlock(&pch->thread->dmac->lock);
2335 spin_unlock_irqrestore(&pch->lock, flags);
2337 out:
2338 dma_set_residue(txstate, residual);
2340 return ret;
2343 static void pl330_issue_pending(struct dma_chan *chan)
2345 struct dma_pl330_chan *pch = to_pchan(chan);
2346 unsigned long flags;
2348 spin_lock_irqsave(&pch->lock, flags);
2349 if (list_empty(&pch->work_list)) {
2351 * Warn on nothing pending. Empty submitted_list may
2352 * break our pm_runtime usage counter as it is
2353 * updated on work_list emptiness status.
2355 WARN_ON(list_empty(&pch->submitted_list));
2356 pch->active = true;
2357 pm_runtime_get_sync(pch->dmac->ddma.dev);
2359 list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2360 spin_unlock_irqrestore(&pch->lock, flags);
2362 pl330_tasklet((unsigned long)pch);
2366 * We returned the last one of the circular list of descriptor(s)
2367 * from prep_xxx, so the argument to submit corresponds to the last
2368 * descriptor of the list.
2370 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2372 struct dma_pl330_desc *desc, *last = to_desc(tx);
2373 struct dma_pl330_chan *pch = to_pchan(tx->chan);
2374 dma_cookie_t cookie;
2375 unsigned long flags;
2377 spin_lock_irqsave(&pch->lock, flags);
2379 /* Assign cookies to all nodes */
2380 while (!list_empty(&last->node)) {
2381 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2382 if (pch->cyclic) {
2383 desc->txd.callback = last->txd.callback;
2384 desc->txd.callback_param = last->txd.callback_param;
2386 desc->last = false;
2388 dma_cookie_assign(&desc->txd);
2390 list_move_tail(&desc->node, &pch->submitted_list);
2393 last->last = true;
2394 cookie = dma_cookie_assign(&last->txd);
2395 list_add_tail(&last->node, &pch->submitted_list);
2396 spin_unlock_irqrestore(&pch->lock, flags);
2398 return cookie;
2401 static inline void _init_desc(struct dma_pl330_desc *desc)
2403 desc->rqcfg.swap = SWAP_NO;
2404 desc->rqcfg.scctl = CCTRL0;
2405 desc->rqcfg.dcctl = CCTRL0;
2406 desc->txd.tx_submit = pl330_tx_submit;
2408 INIT_LIST_HEAD(&desc->node);
2411 /* Returns the number of descriptors added to the DMAC pool */
2412 static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
2414 struct dma_pl330_desc *desc;
2415 unsigned long flags;
2416 int i;
2418 desc = kcalloc(count, sizeof(*desc), flg);
2419 if (!desc)
2420 return 0;
2422 spin_lock_irqsave(&pl330->pool_lock, flags);
2424 for (i = 0; i < count; i++) {
2425 _init_desc(&desc[i]);
2426 list_add_tail(&desc[i].node, &pl330->desc_pool);
2429 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2431 return count;
2434 static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
2436 struct dma_pl330_desc *desc = NULL;
2437 unsigned long flags;
2439 spin_lock_irqsave(&pl330->pool_lock, flags);
2441 if (!list_empty(&pl330->desc_pool)) {
2442 desc = list_entry(pl330->desc_pool.next,
2443 struct dma_pl330_desc, node);
2445 list_del_init(&desc->node);
2447 desc->status = PREP;
2448 desc->txd.callback = NULL;
2451 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2453 return desc;
2456 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2458 struct pl330_dmac *pl330 = pch->dmac;
2459 u8 *peri_id = pch->chan.private;
2460 struct dma_pl330_desc *desc;
2462 /* Pluck one desc from the pool of DMAC */
2463 desc = pluck_desc(pl330);
2465 /* If the DMAC pool is empty, alloc new */
2466 if (!desc) {
2467 if (!add_desc(pl330, GFP_ATOMIC, 1))
2468 return NULL;
2470 /* Try again */
2471 desc = pluck_desc(pl330);
2472 if (!desc) {
2473 dev_err(pch->dmac->ddma.dev,
2474 "%s:%d ALERT!\n", __func__, __LINE__);
2475 return NULL;
2479 /* Initialize the descriptor */
2480 desc->pchan = pch;
2481 desc->txd.cookie = 0;
2482 async_tx_ack(&desc->txd);
2484 desc->peri = peri_id ? pch->chan.chan_id : 0;
2485 desc->rqcfg.pcfg = &pch->dmac->pcfg;
2487 dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2489 return desc;
2492 static inline void fill_px(struct pl330_xfer *px,
2493 dma_addr_t dst, dma_addr_t src, size_t len)
2495 px->bytes = len;
2496 px->dst_addr = dst;
2497 px->src_addr = src;
2500 static struct dma_pl330_desc *
2501 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2502 dma_addr_t src, size_t len)
2504 struct dma_pl330_desc *desc = pl330_get_desc(pch);
2506 if (!desc) {
2507 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2508 __func__, __LINE__);
2509 return NULL;
2513 * Ideally we should lookout for reqs bigger than
2514 * those that can be programmed with 256 bytes of
2515 * MC buffer, but considering a req size is seldom
2516 * going to be word-unaligned and more than 200MB,
2517 * we take it easy.
2518 * Also, should the limit is reached we'd rather
2519 * have the platform increase MC buffer size than
2520 * complicating this API driver.
2522 fill_px(&desc->px, dst, src, len);
2524 return desc;
2527 /* Call after fixing burst size */
2528 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2530 struct dma_pl330_chan *pch = desc->pchan;
2531 struct pl330_dmac *pl330 = pch->dmac;
2532 int burst_len;
2534 burst_len = pl330->pcfg.data_bus_width / 8;
2535 burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2536 burst_len >>= desc->rqcfg.brst_size;
2538 /* src/dst_burst_len can't be more than 16 */
2539 if (burst_len > 16)
2540 burst_len = 16;
2542 while (burst_len > 1) {
2543 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2544 break;
2545 burst_len--;
2548 return burst_len;
2551 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2552 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2553 size_t period_len, enum dma_transfer_direction direction,
2554 unsigned long flags)
2556 struct dma_pl330_desc *desc = NULL, *first = NULL;
2557 struct dma_pl330_chan *pch = to_pchan(chan);
2558 struct pl330_dmac *pl330 = pch->dmac;
2559 unsigned int i;
2560 dma_addr_t dst;
2561 dma_addr_t src;
2563 if (len % period_len != 0)
2564 return NULL;
2566 if (!is_slave_direction(direction)) {
2567 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2568 __func__, __LINE__);
2569 return NULL;
2572 for (i = 0; i < len / period_len; i++) {
2573 desc = pl330_get_desc(pch);
2574 if (!desc) {
2575 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2576 __func__, __LINE__);
2578 if (!first)
2579 return NULL;
2581 spin_lock_irqsave(&pl330->pool_lock, flags);
2583 while (!list_empty(&first->node)) {
2584 desc = list_entry(first->node.next,
2585 struct dma_pl330_desc, node);
2586 list_move_tail(&desc->node, &pl330->desc_pool);
2589 list_move_tail(&first->node, &pl330->desc_pool);
2591 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2593 return NULL;
2596 switch (direction) {
2597 case DMA_MEM_TO_DEV:
2598 desc->rqcfg.src_inc = 1;
2599 desc->rqcfg.dst_inc = 0;
2600 src = dma_addr;
2601 dst = pch->fifo_addr;
2602 break;
2603 case DMA_DEV_TO_MEM:
2604 desc->rqcfg.src_inc = 0;
2605 desc->rqcfg.dst_inc = 1;
2606 src = pch->fifo_addr;
2607 dst = dma_addr;
2608 break;
2609 default:
2610 break;
2613 desc->rqtype = direction;
2614 desc->rqcfg.brst_size = pch->burst_sz;
2615 desc->rqcfg.brst_len = 1;
2616 desc->bytes_requested = period_len;
2617 fill_px(&desc->px, dst, src, period_len);
2619 if (!first)
2620 first = desc;
2621 else
2622 list_add_tail(&desc->node, &first->node);
2624 dma_addr += period_len;
2627 if (!desc)
2628 return NULL;
2630 pch->cyclic = true;
2631 desc->txd.flags = flags;
2633 return &desc->txd;
2636 static struct dma_async_tx_descriptor *
2637 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2638 dma_addr_t src, size_t len, unsigned long flags)
2640 struct dma_pl330_desc *desc;
2641 struct dma_pl330_chan *pch = to_pchan(chan);
2642 struct pl330_dmac *pl330;
2643 int burst;
2645 if (unlikely(!pch || !len))
2646 return NULL;
2648 pl330 = pch->dmac;
2650 desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2651 if (!desc)
2652 return NULL;
2654 desc->rqcfg.src_inc = 1;
2655 desc->rqcfg.dst_inc = 1;
2656 desc->rqtype = DMA_MEM_TO_MEM;
2658 /* Select max possible burst size */
2659 burst = pl330->pcfg.data_bus_width / 8;
2662 * Make sure we use a burst size that aligns with all the memcpy
2663 * parameters because our DMA programming algorithm doesn't cope with
2664 * transfers which straddle an entry in the DMA device's MFIFO.
2666 while ((src | dst | len) & (burst - 1))
2667 burst /= 2;
2669 desc->rqcfg.brst_size = 0;
2670 while (burst != (1 << desc->rqcfg.brst_size))
2671 desc->rqcfg.brst_size++;
2674 * If burst size is smaller than bus width then make sure we only
2675 * transfer one at a time to avoid a burst stradling an MFIFO entry.
2677 if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2678 desc->rqcfg.brst_len = 1;
2680 desc->rqcfg.brst_len = get_burst_len(desc, len);
2681 desc->bytes_requested = len;
2683 desc->txd.flags = flags;
2685 return &desc->txd;
2688 static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2689 struct dma_pl330_desc *first)
2691 unsigned long flags;
2692 struct dma_pl330_desc *desc;
2694 if (!first)
2695 return;
2697 spin_lock_irqsave(&pl330->pool_lock, flags);
2699 while (!list_empty(&first->node)) {
2700 desc = list_entry(first->node.next,
2701 struct dma_pl330_desc, node);
2702 list_move_tail(&desc->node, &pl330->desc_pool);
2705 list_move_tail(&first->node, &pl330->desc_pool);
2707 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2710 static struct dma_async_tx_descriptor *
2711 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2712 unsigned int sg_len, enum dma_transfer_direction direction,
2713 unsigned long flg, void *context)
2715 struct dma_pl330_desc *first, *desc = NULL;
2716 struct dma_pl330_chan *pch = to_pchan(chan);
2717 struct scatterlist *sg;
2718 int i;
2719 dma_addr_t addr;
2721 if (unlikely(!pch || !sgl || !sg_len))
2722 return NULL;
2724 addr = pch->fifo_addr;
2726 first = NULL;
2728 for_each_sg(sgl, sg, sg_len, i) {
2730 desc = pl330_get_desc(pch);
2731 if (!desc) {
2732 struct pl330_dmac *pl330 = pch->dmac;
2734 dev_err(pch->dmac->ddma.dev,
2735 "%s:%d Unable to fetch desc\n",
2736 __func__, __LINE__);
2737 __pl330_giveback_desc(pl330, first);
2739 return NULL;
2742 if (!first)
2743 first = desc;
2744 else
2745 list_add_tail(&desc->node, &first->node);
2747 if (direction == DMA_MEM_TO_DEV) {
2748 desc->rqcfg.src_inc = 1;
2749 desc->rqcfg.dst_inc = 0;
2750 fill_px(&desc->px,
2751 addr, sg_dma_address(sg), sg_dma_len(sg));
2752 } else {
2753 desc->rqcfg.src_inc = 0;
2754 desc->rqcfg.dst_inc = 1;
2755 fill_px(&desc->px,
2756 sg_dma_address(sg), addr, sg_dma_len(sg));
2759 desc->rqcfg.brst_size = pch->burst_sz;
2760 desc->rqcfg.brst_len = 1;
2761 desc->rqtype = direction;
2762 desc->bytes_requested = sg_dma_len(sg);
2765 /* Return the last desc in the chain */
2766 desc->txd.flags = flg;
2767 return &desc->txd;
2770 static irqreturn_t pl330_irq_handler(int irq, void *data)
2772 if (pl330_update(data))
2773 return IRQ_HANDLED;
2774 else
2775 return IRQ_NONE;
2778 #define PL330_DMA_BUSWIDTHS \
2779 BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2780 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2781 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2782 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2783 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2786 * Runtime PM callbacks are provided by amba/bus.c driver.
2788 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2789 * bus driver will only disable/enable the clock in runtime PM callbacks.
2791 static int __maybe_unused pl330_suspend(struct device *dev)
2793 struct amba_device *pcdev = to_amba_device(dev);
2795 pm_runtime_disable(dev);
2797 if (!pm_runtime_status_suspended(dev)) {
2798 /* amba did not disable the clock */
2799 amba_pclk_disable(pcdev);
2801 amba_pclk_unprepare(pcdev);
2803 return 0;
2806 static int __maybe_unused pl330_resume(struct device *dev)
2808 struct amba_device *pcdev = to_amba_device(dev);
2809 int ret;
2811 ret = amba_pclk_prepare(pcdev);
2812 if (ret)
2813 return ret;
2815 if (!pm_runtime_status_suspended(dev))
2816 ret = amba_pclk_enable(pcdev);
2818 pm_runtime_enable(dev);
2820 return ret;
2823 static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2825 static int
2826 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2828 struct dma_pl330_platdata *pdat;
2829 struct pl330_config *pcfg;
2830 struct pl330_dmac *pl330;
2831 struct dma_pl330_chan *pch, *_p;
2832 struct dma_device *pd;
2833 struct resource *res;
2834 int i, ret, irq;
2835 int num_chan;
2836 struct device_node *np = adev->dev.of_node;
2838 pdat = dev_get_platdata(&adev->dev);
2840 ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2841 if (ret)
2842 return ret;
2844 /* Allocate a new DMAC and its Channels */
2845 pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2846 if (!pl330)
2847 return -ENOMEM;
2849 pd = &pl330->ddma;
2850 pd->dev = &adev->dev;
2852 pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2854 /* get quirk */
2855 for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2856 if (of_property_read_bool(np, of_quirks[i].quirk))
2857 pl330->quirks |= of_quirks[i].id;
2859 res = &adev->res;
2860 pl330->base = devm_ioremap_resource(&adev->dev, res);
2861 if (IS_ERR(pl330->base))
2862 return PTR_ERR(pl330->base);
2864 amba_set_drvdata(adev, pl330);
2866 for (i = 0; i < AMBA_NR_IRQS; i++) {
2867 irq = adev->irq[i];
2868 if (irq) {
2869 ret = devm_request_irq(&adev->dev, irq,
2870 pl330_irq_handler, 0,
2871 dev_name(&adev->dev), pl330);
2872 if (ret)
2873 return ret;
2874 } else {
2875 break;
2879 pcfg = &pl330->pcfg;
2881 pcfg->periph_id = adev->periphid;
2882 ret = pl330_add(pl330);
2883 if (ret)
2884 return ret;
2886 INIT_LIST_HEAD(&pl330->desc_pool);
2887 spin_lock_init(&pl330->pool_lock);
2889 /* Create a descriptor pool of default size */
2890 if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
2891 dev_warn(&adev->dev, "unable to allocate desc\n");
2893 INIT_LIST_HEAD(&pd->channels);
2895 /* Initialize channel parameters */
2896 if (pdat)
2897 num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
2898 else
2899 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2901 pl330->num_peripherals = num_chan;
2903 pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2904 if (!pl330->peripherals) {
2905 ret = -ENOMEM;
2906 goto probe_err2;
2909 for (i = 0; i < num_chan; i++) {
2910 pch = &pl330->peripherals[i];
2911 if (!adev->dev.of_node)
2912 pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2913 else
2914 pch->chan.private = adev->dev.of_node;
2916 INIT_LIST_HEAD(&pch->submitted_list);
2917 INIT_LIST_HEAD(&pch->work_list);
2918 INIT_LIST_HEAD(&pch->completed_list);
2919 spin_lock_init(&pch->lock);
2920 pch->thread = NULL;
2921 pch->chan.device = pd;
2922 pch->dmac = pl330;
2924 /* Add the channel to the DMAC list */
2925 list_add_tail(&pch->chan.device_node, &pd->channels);
2928 if (pdat) {
2929 pd->cap_mask = pdat->cap_mask;
2930 } else {
2931 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2932 if (pcfg->num_peri) {
2933 dma_cap_set(DMA_SLAVE, pd->cap_mask);
2934 dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2935 dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2939 pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2940 pd->device_free_chan_resources = pl330_free_chan_resources;
2941 pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2942 pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2943 pd->device_tx_status = pl330_tx_status;
2944 pd->device_prep_slave_sg = pl330_prep_slave_sg;
2945 pd->device_config = pl330_config;
2946 pd->device_pause = pl330_pause;
2947 pd->device_terminate_all = pl330_terminate_all;
2948 pd->device_issue_pending = pl330_issue_pending;
2949 pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
2950 pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
2951 pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2952 pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
2953 pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
2954 1 : PL330_MAX_BURST);
2956 ret = dma_async_device_register(pd);
2957 if (ret) {
2958 dev_err(&adev->dev, "unable to register DMAC\n");
2959 goto probe_err3;
2962 if (adev->dev.of_node) {
2963 ret = of_dma_controller_register(adev->dev.of_node,
2964 of_dma_pl330_xlate, pl330);
2965 if (ret) {
2966 dev_err(&adev->dev,
2967 "unable to register DMA to the generic DT DMA helpers\n");
2971 adev->dev.dma_parms = &pl330->dma_parms;
2974 * This is the limit for transfers with a buswidth of 1, larger
2975 * buswidths will have larger limits.
2977 ret = dma_set_max_seg_size(&adev->dev, 1900800);
2978 if (ret)
2979 dev_err(&adev->dev, "unable to set the seg size\n");
2982 dev_info(&adev->dev,
2983 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
2984 dev_info(&adev->dev,
2985 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2986 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
2987 pcfg->num_peri, pcfg->num_events);
2989 pm_runtime_irq_safe(&adev->dev);
2990 pm_runtime_use_autosuspend(&adev->dev);
2991 pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
2992 pm_runtime_mark_last_busy(&adev->dev);
2993 pm_runtime_put_autosuspend(&adev->dev);
2995 return 0;
2996 probe_err3:
2997 /* Idle the DMAC */
2998 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
2999 chan.device_node) {
3001 /* Remove the channel */
3002 list_del(&pch->chan.device_node);
3004 /* Flush the channel */
3005 if (pch->thread) {
3006 pl330_terminate_all(&pch->chan);
3007 pl330_free_chan_resources(&pch->chan);
3010 probe_err2:
3011 pl330_del(pl330);
3013 return ret;
3016 static int pl330_remove(struct amba_device *adev)
3018 struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3019 struct dma_pl330_chan *pch, *_p;
3020 int i, irq;
3022 pm_runtime_get_noresume(pl330->ddma.dev);
3024 if (adev->dev.of_node)
3025 of_dma_controller_free(adev->dev.of_node);
3027 for (i = 0; i < AMBA_NR_IRQS; i++) {
3028 irq = adev->irq[i];
3029 devm_free_irq(&adev->dev, irq, pl330);
3032 dma_async_device_unregister(&pl330->ddma);
3034 /* Idle the DMAC */
3035 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3036 chan.device_node) {
3038 /* Remove the channel */
3039 list_del(&pch->chan.device_node);
3041 /* Flush the channel */
3042 if (pch->thread) {
3043 pl330_terminate_all(&pch->chan);
3044 pl330_free_chan_resources(&pch->chan);
3048 pl330_del(pl330);
3050 return 0;
3053 static struct amba_id pl330_ids[] = {
3055 .id = 0x00041330,
3056 .mask = 0x000fffff,
3058 { 0, 0 },
3061 MODULE_DEVICE_TABLE(amba, pl330_ids);
3063 static struct amba_driver pl330_driver = {
3064 .drv = {
3065 .owner = THIS_MODULE,
3066 .name = "dma-pl330",
3067 .pm = &pl330_pm,
3069 .id_table = pl330_ids,
3070 .probe = pl330_probe,
3071 .remove = pl330_remove,
3074 module_amba_driver(pl330_driver);
3076 MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3077 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3078 MODULE_LICENSE("GPL");