drivers/net/ethernet/intel/igbvf/vf.c

   1 /*******************************************************************************
   2
   3   Intel(R) 82576 Virtual Function Linux driver
   4   Copyright(c) 2009 - 2012 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  24   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  25
  26 *******************************************************************************/
  27
  28
  29 #include "vf.h"
  30
  31 static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
  32 static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
  33                                      u16 *duplex);
  34 static s32 e1000_init_hw_vf(struct e1000_hw *hw);
  35 static s32 e1000_reset_hw_vf(struct e1000_hw *hw);
  36
  37 static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *,
  38                                          u32, u32, u32);
  39 static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32);
  40 static s32 e1000_read_mac_addr_vf(struct e1000_hw *);
  41 static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool);
  42
  43 /**
  44  *  e1000_init_mac_params_vf - Inits MAC params
  45  *  @hw: pointer to the HW structure
  46  **/
  47 static s32 e1000_init_mac_params_vf(struct e1000_hw *hw)
  48 {
  49         struct e1000_mac_info *mac = &hw->mac;
  50
  51         /* VF's have no MTA Registers - PF feature only */
  52         mac->mta_reg_count = 128;
  53         /* VF's have no access to RAR entries  */
  54         mac->rar_entry_count = 1;
  55
  56         /* Function pointers */
  57         /* reset */
  58         mac->ops.reset_hw = e1000_reset_hw_vf;
  59         /* hw initialization */
  60         mac->ops.init_hw = e1000_init_hw_vf;
  61         /* check for link */
  62         mac->ops.check_for_link = e1000_check_for_link_vf;
  63         /* link info */
  64         mac->ops.get_link_up_info = e1000_get_link_up_info_vf;
  65         /* multicast address update */
  66         mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf;
  67         /* set mac address */
  68         mac->ops.rar_set = e1000_rar_set_vf;
  69         /* read mac address */
  70         mac->ops.read_mac_addr = e1000_read_mac_addr_vf;
  71         /* set vlan filter table array */
  72         mac->ops.set_vfta = e1000_set_vfta_vf;
  73
  74         return E1000_SUCCESS;
  75 }
  76
  77 /**
  78  *  e1000_init_function_pointers_vf - Inits function pointers
  79  *  @hw: pointer to the HW structure
  80  **/
  81 void e1000_init_function_pointers_vf(struct e1000_hw *hw)
  82 {
  83         hw->mac.ops.init_params = e1000_init_mac_params_vf;
  84         hw->mbx.ops.init_params = e1000_init_mbx_params_vf;
  85 }
  86
  87 /**
  88  *  e1000_get_link_up_info_vf - Gets link info.
  89  *  @hw: pointer to the HW structure
  90  *  @speed: pointer to 16 bit value to store link speed.
  91  *  @duplex: pointer to 16 bit value to store duplex.
  92  *
  93  *  Since we cannot read the PHY and get accurate link info, we must rely upon
  94  *  the status register's data which is often stale and inaccurate.
  95  **/
  96 static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
  97                                      u16 *duplex)
  98 {
  99         s32 status;
 100
 101         status = er32(STATUS);
 102         if (status & E1000_STATUS_SPEED_1000)
 103                 *speed = SPEED_1000;
 104         else if (status & E1000_STATUS_SPEED_100)
 105                 *speed = SPEED_100;
 106         else
 107                 *speed = SPEED_10;
 108
 109         if (status & E1000_STATUS_FD)
 110                 *duplex = FULL_DUPLEX;
 111         else
 112                 *duplex = HALF_DUPLEX;
 113
 114         return E1000_SUCCESS;
 115 }
 116
 117 /**
 118  *  e1000_reset_hw_vf - Resets the HW
 119  *  @hw: pointer to the HW structure
 120  *
 121  *  VF's provide a function level reset. This is done using bit 26 of ctrl_reg.
 122  *  This is all the reset we can perform on a VF.
 123  **/
 124 static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
 125 {
 126         struct e1000_mbx_info *mbx = &hw->mbx;
 127         u32 timeout = E1000_VF_INIT_TIMEOUT;
 128         u32 ret_val = -E1000_ERR_MAC_INIT;
 129         u32 msgbuf[3];
 130         u8 *addr = (u8 *)(&msgbuf[1]);
 131         u32 ctrl;
 132
 133         /* assert vf queue/interrupt reset */
 134         ctrl = er32(CTRL);
 135         ew32(CTRL, ctrl | E1000_CTRL_RST);
 136
 137         /* we cannot initialize while the RSTI / RSTD bits are asserted */
 138         while (!mbx->ops.check_for_rst(hw) && timeout) {
 139                 timeout--;
 140                 udelay(5);
 141         }
 142
 143         if (timeout) {
 144                 /* mailbox timeout can now become active */
 145                 mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
 146
 147                 /* notify pf of vf reset completion */
 148                 msgbuf[0] = E1000_VF_RESET;
 149                 mbx->ops.write_posted(hw, msgbuf, 1);
 150
 151                 msleep(10);
 152
 153                 /* set our "perm_addr" based on info provided by PF */
 154                 ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
 155                 if (!ret_val) {
 156                         if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK))
 157                                 memcpy(hw->mac.perm_addr, addr, 6);
 158                         else
 159                                 ret_val = -E1000_ERR_MAC_INIT;
 160                 }
 161         }
 162
 163         return ret_val;
 164 }
 165
 166 /**
 167  *  e1000_init_hw_vf - Inits the HW
 168  *  @hw: pointer to the HW structure
 169  *
 170  *  Not much to do here except clear the PF Reset indication if there is one.
 171  **/
 172 static s32 e1000_init_hw_vf(struct e1000_hw *hw)
 173 {
 174         /* attempt to set and restore our mac address */
 175         e1000_rar_set_vf(hw, hw->mac.addr, 0);
 176
 177         return E1000_SUCCESS;
 178 }
 179
 180 /**
 181  *  e1000_hash_mc_addr_vf - Generate a multicast hash value
 182  *  @hw: pointer to the HW structure
 183  *  @mc_addr: pointer to a multicast address
 184  *
 185  *  Generates a multicast address hash value which is used to determine
 186  *  the multicast filter table array address and new table value.  See
 187  *  e1000_mta_set_generic()
 188  **/
 189 static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
 190 {
 191         u32 hash_value, hash_mask;
 192         u8 bit_shift = 0;
 193
 194         /* Register count multiplied by bits per register */
 195         hash_mask = (hw->mac.mta_reg_count * 32) - 1;
 196
 197         /*
 198          * The bit_shift is the number of left-shifts
 199          * where 0xFF would still fall within the hash mask.
 200          */
 201         while (hash_mask >> bit_shift != 0xFF)
 202                 bit_shift++;
 203
 204         hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
 205                                   (((u16) mc_addr[5]) << bit_shift)));
 206
 207         return hash_value;
 208 }
 209
 210 /**
 211  *  e1000_update_mc_addr_list_vf - Update Multicast addresses
 212  *  @hw: pointer to the HW structure
 213  *  @mc_addr_list: array of multicast addresses to program
 214  *  @mc_addr_count: number of multicast addresses to program
 215  *  @rar_used_count: the first RAR register free to program
 216  *  @rar_count: total number of supported Receive Address Registers
 217  *
 218  *  Updates the Receive Address Registers and Multicast Table Array.
 219  *  The caller must have a packed mc_addr_list of multicast addresses.
 220  *  The parameter rar_count will usually be hw->mac.rar_entry_count
 221  *  unless there are workarounds that change this.
 222  **/
 223 static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
 224                                   u8 *mc_addr_list, u32 mc_addr_count,
 225                                   u32 rar_used_count, u32 rar_count)
 226 {
 227         struct e1000_mbx_info *mbx = &hw->mbx;
 228         u32 msgbuf[E1000_VFMAILBOX_SIZE];
 229         u16 *hash_list = (u16 *)&msgbuf[1];
 230         u32 hash_value;
 231         u32 cnt, i;
 232
 233         /* Each entry in the list uses 1 16 bit word.  We have 30
 234          * 16 bit words available in our HW msg buffer (minus 1 for the
 235          * msg type).  That's 30 hash values if we pack 'em right.  If
 236          * there are more than 30 MC addresses to add then punt the
 237          * extras for now and then add code to handle more than 30 later.
 238          * It would be unusual for a server to request that many multi-cast
 239          * addresses except for in large enterprise network environments.
 240          */
 241
 242         cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
 243         msgbuf[0] = E1000_VF_SET_MULTICAST;
 244         msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT;
 245
 246         for (i = 0; i < cnt; i++) {
 247                 hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list);
 248                 hash_list[i] = hash_value & 0x0FFFF;
 249                 mc_addr_list += ETH_ADDR_LEN;
 250         }
 251
 252         mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE);
 253 }
 254
 255 /**
 256  *  e1000_set_vfta_vf - Set/Unset vlan filter table address
 257  *  @hw: pointer to the HW structure
 258  *  @vid: determines the vfta register and bit to set/unset
 259  *  @set: if true then set bit, else clear bit
 260  **/
 261 static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
 262 {
 263         struct e1000_mbx_info *mbx = &hw->mbx;
 264         u32 msgbuf[2];
 265         s32 err;
 266
 267         msgbuf[0] = E1000_VF_SET_VLAN;
 268         msgbuf[1] = vid;
 269         /* Setting the 8 bit field MSG INFO to true indicates "add" */
 270         if (set)
 271                 msgbuf[0] |= 1 << E1000_VT_MSGINFO_SHIFT;
 272
 273         mbx->ops.write_posted(hw, msgbuf, 2);
 274
 275         err = mbx->ops.read_posted(hw, msgbuf, 2);
 276
 277         msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
 278
 279         /* if nacked the vlan was rejected */
 280         if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
 281                 err = -E1000_ERR_MAC_INIT;
 282
 283         return err;
 284 }
 285
 286 /** e1000_rlpml_set_vf - Set the maximum receive packet length
 287  *  @hw: pointer to the HW structure
 288  *  @max_size: value to assign to max frame size
 289  **/
 290 void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size)
 291 {
 292         struct e1000_mbx_info *mbx = &hw->mbx;
 293         u32 msgbuf[2];
 294
 295         msgbuf[0] = E1000_VF_SET_LPE;
 296         msgbuf[1] = max_size;
 297
 298         mbx->ops.write_posted(hw, msgbuf, 2);
 299 }
 300
 301 /**
 302  *  e1000_rar_set_vf - set device MAC address
 303  *  @hw: pointer to the HW structure
 304  *  @addr: pointer to the receive address
 305  *  @index receive address array register
 306  **/
 307 static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
 308 {
 309         struct e1000_mbx_info *mbx = &hw->mbx;
 310         u32 msgbuf[3];
 311         u8 *msg_addr = (u8 *)(&msgbuf[1]);
 312         s32 ret_val;
 313
 314         memset(msgbuf, 0, 12);
 315         msgbuf[0] = E1000_VF_SET_MAC_ADDR;
 316         memcpy(msg_addr, addr, 6);
 317         ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
 318
 319         if (!ret_val)
 320                 ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
 321
 322         msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
 323
 324         /* if nacked the address was rejected, use "perm_addr" */
 325         if (!ret_val &&
 326             (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
 327                 e1000_read_mac_addr_vf(hw);
 328 }
 329
 330 /**
 331  *  e1000_read_mac_addr_vf - Read device MAC address
 332  *  @hw: pointer to the HW structure
 333  **/
 334 static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw)
 335 {
 336         int i;
 337
 338         for (i = 0; i < ETH_ADDR_LEN; i++)
 339                 hw->mac.addr[i] = hw->mac.perm_addr[i];
 340
 341         return E1000_SUCCESS;
 342 }
 343
 344 /**
 345  *  e1000_check_for_link_vf - Check for link for a virtual interface
 346  *  @hw: pointer to the HW structure
 347  *
 348  *  Checks to see if the underlying PF is still talking to the VF and
 349  *  if it is then it reports the link state to the hardware, otherwise
 350  *  it reports link down and returns an error.
 351  **/
 352 static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
 353 {
 354         struct e1000_mbx_info *mbx = &hw->mbx;
 355         struct e1000_mac_info *mac = &hw->mac;
 356         s32 ret_val = E1000_SUCCESS;
 357         u32 in_msg = 0;
 358
 359         /*
 360          * We only want to run this if there has been a rst asserted.
 361          * in this case that could mean a link change, device reset,
 362          * or a virtual function reset
 363          */
 364
 365         /* If we were hit with a reset or timeout drop the link */
 366         if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
 367                 mac->get_link_status = true;
 368
 369         if (!mac->get_link_status)
 370                 goto out;
 371
 372         /* if link status is down no point in checking to see if pf is up */
 373         if (!(er32(STATUS) & E1000_STATUS_LU))
 374                 goto out;
 375
 376         /* if the read failed it could just be a mailbox collision, best wait
 377          * until we are called again and don't report an error */
 378         if (mbx->ops.read(hw, &in_msg, 1))
 379                 goto out;
 380
 381         /* if incoming message isn't clear to send we are waiting on response */
 382         if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
 383                 /* message is not CTS and is NACK we must have lost CTS status */
 384                 if (in_msg & E1000_VT_MSGTYPE_NACK)
 385                         ret_val = -E1000_ERR_MAC_INIT;
 386                 goto out;
 387         }
 388
 389         /* the pf is talking, if we timed out in the past we reinit */
 390         if (!mbx->timeout) {
 391                 ret_val = -E1000_ERR_MAC_INIT;
 392                 goto out;
 393         }
 394
 395         /* if we passed all the tests above then the link is up and we no
 396          * longer need to check for link */
 397         mac->get_link_status = false;
 398
 399 out:
 400         return ret_val;
 401 }
 402