?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / ata / ahci_brcm.c
blobea430819c80b9793657652775edda0b7131c08ae
1 /*
2 * Broadcom SATA3 AHCI Controller Driver
3 *
4 * Copyright © 2009-2015 Broadcom Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2, or (at your option)
9 * any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17 #include <linux/ahci_platform.h>
18 #include <linux/compiler.h>
19 #include <linux/device.h>
20 #include <linux/init.h>
21 #include <linux/interrupt.h>
22 #include <linux/io.h>
23 #include <linux/kernel.h>
24 #include <linux/libata.h>
25 #include <linux/module.h>
26 #include <linux/of.h>
27 #include <linux/platform_device.h>
28 #include <linux/string.h>
29
30 #include "ahci.h"
31
32 #define DRV_NAME "brcm-ahci"
33
34 #define SATA_TOP_CTRL_VERSION 0x0
35 #define SATA_TOP_CTRL_BUS_CTRL 0x4
36 #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
37 #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
38 #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
39 #define PIODATA_ENDIAN_SHIFT 6
40 #define ENDIAN_SWAP_NONE 0
41 #define ENDIAN_SWAP_FULL 2
42 #define SATA_TOP_CTRL_TP_CTRL 0x8
43 #define SATA_TOP_CTRL_PHY_CTRL 0xc
44 #define SATA_TOP_CTRL_PHY_CTRL_1 0x0
45 #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
46 #define SATA_TOP_CTRL_PHY_CTRL_2 0x4
47 #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
48 #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
49 #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
50 #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
51 #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
52 #define SATA_TOP_CTRL_PHY_OFFS 0x8
53 #define SATA_TOP_MAX_PHYS 2
54
55 #define SATA_FIRST_PORT_CTRL 0x700
56 #define SATA_NEXT_PORT_CTRL_OFFSET 0x80
57 #define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18)
58
59 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */
60 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
61 #define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
62 #define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
63 #else
64 #define DATA_ENDIAN 0
65 #define MMIO_ENDIAN 0
66 #endif
67
68 #define BUS_CTRL_ENDIAN_CONF \
69 ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
70 (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
71 (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
72
73 #define BUS_CTRL_ENDIAN_NSP_CONF \
74 (0x02 << DMADATA_ENDIAN_SHIFT | 0x02 << DMADESC_ENDIAN_SHIFT)
75
76 #define BUS_CTRL_ENDIAN_CONF_MASK \
77 (0x3 << MMIO_ENDIAN_SHIFT | 0x3 << DMADESC_ENDIAN_SHIFT | \
78 0x3 << DMADATA_ENDIAN_SHIFT | 0x3 << PIODATA_ENDIAN_SHIFT)
79
80 enum brcm_ahci_version {
81 BRCM_SATA_BCM7425 = 1,
82 BRCM_SATA_BCM7445,
83 BRCM_SATA_NSP,
84 };
85
86 enum brcm_ahci_quirks {
87 BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
88 BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
89 };
90
91 struct brcm_ahci_priv {
92 struct device *dev;
93 void __iomem *top_ctrl;
94 u32 port_mask;
95 u32 quirks;
96 enum brcm_ahci_version version;
97 };
98
99 static inline u32 brcm_sata_readreg(void __iomem *addr)
100 {
101 /*
102 * MIPS endianness is configured by boot strap, which also reverses all
103 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
104 * endian I/O).
105 *
106 * Other architectures (e.g., ARM) either do not support big endian, or
107 * else leave I/O in little endian mode.
108 */
109 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
110 return __raw_readl(addr);
111 else
112 return readl_relaxed(addr);
113 }
114
115 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
116 {
117 /* See brcm_sata_readreg() comments */
118 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
119 __raw_writel(val, addr);
120 else
121 writel_relaxed(val, addr);
122 }
123
124 static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
125 {
126 struct brcm_ahci_priv *priv = hpriv->plat_data;
127 u32 port_ctrl, host_caps;
128 int i;
129
130 /* Enable support for ALPM */
131 host_caps = readl(hpriv->mmio + HOST_CAP);
132 if (!(host_caps & HOST_CAP_ALPM))
133 hpriv->flags |= AHCI_HFLAG_YES_ALPM;
134
135 /*
136 * Adjust timeout to allow PLL sufficient time to lock while waking
137 * up from slumber mode.
138 */
139 for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
140 i < SATA_TOP_MAX_PHYS;
141 i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
142 if (priv->port_mask & BIT(i))
143 writel(0xff1003fc,
144 hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
145 }
146 }
147
148 static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
149 {
150 void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
151 (port * SATA_TOP_CTRL_PHY_OFFS);
152 void __iomem *p;
153 u32 reg;
154
155 if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
156 return;
157
158 /* clear PHY_DEFAULT_POWER_STATE */
159 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
160 reg = brcm_sata_readreg(p);
161 reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
162 brcm_sata_writereg(reg, p);
163
164 /* reset the PHY digital logic */
165 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
166 reg = brcm_sata_readreg(p);
167 reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
168 SATA_TOP_CTRL_2_SW_RST_RX);
169 reg |= SATA_TOP_CTRL_2_SW_RST_TX;
170 brcm_sata_writereg(reg, p);
171 reg = brcm_sata_readreg(p);
172 reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
173 brcm_sata_writereg(reg, p);
174 reg = brcm_sata_readreg(p);
175 reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
176 brcm_sata_writereg(reg, p);
177 (void)brcm_sata_readreg(p);
178 }
179
180 static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
181 {
182 void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
183 (port * SATA_TOP_CTRL_PHY_OFFS);
184 void __iomem *p;
185 u32 reg;
186
187 if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
188 return;
189
190 /* power-off the PHY digital logic */
191 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
192 reg = brcm_sata_readreg(p);
193 reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
194 SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
195 SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
196 brcm_sata_writereg(reg, p);
197
198 /* set PHY_DEFAULT_POWER_STATE */
199 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
200 reg = brcm_sata_readreg(p);
201 reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
202 brcm_sata_writereg(reg, p);
203 }
204
205 static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
206 {
207 int i;
208
209 for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
210 if (priv->port_mask & BIT(i))
211 brcm_sata_phy_enable(priv, i);
212 }
213
214 static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
215 {
216 int i;
217
218 for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
219 if (priv->port_mask & BIT(i))
220 brcm_sata_phy_disable(priv, i);
221 }
222
223 static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
224 struct brcm_ahci_priv *priv)
225 {
226 void __iomem *ahci;
227 struct resource *res;
228 u32 impl;
229
230 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
231 ahci = devm_ioremap_resource(&pdev->dev, res);
232 if (IS_ERR(ahci))
233 return 0;
234
235 impl = readl(ahci + HOST_PORTS_IMPL);
236
237 if (fls(impl) > SATA_TOP_MAX_PHYS)
238 dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
239 impl);
240 else if (!impl)
241 dev_info(priv->dev, "no ports found\n");
242
243 devm_iounmap(&pdev->dev, ahci);
244 devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
245
246 return impl;
247 }
248
249 static void brcm_sata_init(struct brcm_ahci_priv *priv)
250 {
251 void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
252 u32 data;
253
254 /* Configure endianness */
255 data = brcm_sata_readreg(ctrl);
256 data &= ~BUS_CTRL_ENDIAN_CONF_MASK;
257 if (priv->version == BRCM_SATA_NSP)
258 data |= BUS_CTRL_ENDIAN_NSP_CONF;
259 else
260 data |= BUS_CTRL_ENDIAN_CONF;
261 brcm_sata_writereg(data, ctrl);
262 }
263
264 static unsigned int brcm_ahci_read_id(struct ata_device *dev,
265 struct ata_taskfile *tf, u16 *id)
266 {
267 struct ata_port *ap = dev->link->ap;
268 struct ata_host *host = ap->host;
269 struct ahci_host_priv *hpriv = host->private_data;
270 struct brcm_ahci_priv *priv = hpriv->plat_data;
271 void __iomem *mmio = hpriv->mmio;
272 unsigned int err_mask;
273 unsigned long flags;
274 int i, rc;
275 u32 ctl;
276
277 /* Try to read the device ID and, if this fails, proceed with the
278 * recovery sequence below
279 */
280 err_mask = ata_do_dev_read_id(dev, tf, id);
281 if (likely(!err_mask))
282 return err_mask;
283
284 /* Disable host interrupts */
285 spin_lock_irqsave(&host->lock, flags);
286 ctl = readl(mmio + HOST_CTL);
287 ctl &= ~HOST_IRQ_EN;
288 writel(ctl, mmio + HOST_CTL);
289 readl(mmio + HOST_CTL); /* flush */
290 spin_unlock_irqrestore(&host->lock, flags);
291
292 /* Perform the SATA PHY reset sequence */
293 brcm_sata_phy_disable(priv, ap->port_no);
294
295 /* Bring the PHY back on */
296 brcm_sata_phy_enable(priv, ap->port_no);
297
298 /* Re-initialize and calibrate the PHY */
299 for (i = 0; i < hpriv->nports; i++) {
300 rc = phy_init(hpriv->phys[i]);
301 if (rc)
302 goto disable_phys;
303
304 rc = phy_calibrate(hpriv->phys[i]);
305 if (rc) {
306 phy_exit(hpriv->phys[i]);
307 goto disable_phys;
308 }
309 }
310
311 /* Re-enable host interrupts */
312 spin_lock_irqsave(&host->lock, flags);
313 ctl = readl(mmio + HOST_CTL);
314 ctl |= HOST_IRQ_EN;
315 writel(ctl, mmio + HOST_CTL);
316 readl(mmio + HOST_CTL); /* flush */
317 spin_unlock_irqrestore(&host->lock, flags);
318
319 return ata_do_dev_read_id(dev, tf, id);
320
321 disable_phys:
322 while (--i >= 0) {
323 phy_power_off(hpriv->phys[i]);
324 phy_exit(hpriv->phys[i]);
325 }
326
327 return AC_ERR_OTHER;
328 }
329
330 static void brcm_ahci_host_stop(struct ata_host *host)
331 {
332 struct ahci_host_priv *hpriv = host->private_data;
333
334 ahci_platform_disable_resources(hpriv);
335 }
336
337 static struct ata_port_operations ahci_brcm_platform_ops = {
338 .inherits = &ahci_ops,
339 .host_stop = brcm_ahci_host_stop,
340 .read_id = brcm_ahci_read_id,
341 };
342
343 static const struct ata_port_info ahci_brcm_port_info = {
344 .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
345 .link_flags = ATA_LFLAG_NO_DB_DELAY,
346 .pio_mask = ATA_PIO4,
347 .udma_mask = ATA_UDMA6,
348 .port_ops = &ahci_brcm_platform_ops,
349 };
350
351 #ifdef CONFIG_PM_SLEEP
352 static int brcm_ahci_suspend(struct device *dev)
353 {
354 struct ata_host *host = dev_get_drvdata(dev);
355 struct ahci_host_priv *hpriv = host->private_data;
356 struct brcm_ahci_priv *priv = hpriv->plat_data;
357 int ret;
358
359 ret = ahci_platform_suspend(dev);
360 brcm_sata_phys_disable(priv);
361 return ret;
362 }
363
364 static int brcm_ahci_resume(struct device *dev)
365 {
366 struct ata_host *host = dev_get_drvdata(dev);
367 struct ahci_host_priv *hpriv = host->private_data;
368 struct brcm_ahci_priv *priv = hpriv->plat_data;
369
370 brcm_sata_init(priv);
371 brcm_sata_phys_enable(priv);
372 brcm_sata_alpm_init(hpriv);
373 return ahci_platform_resume(dev);
374 }
375 #endif
376
377 static struct scsi_host_template ahci_platform_sht = {
378 AHCI_SHT(DRV_NAME),
379 };
380
381 static const struct of_device_id ahci_of_match[] = {
382 {.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
383 {.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
384 {.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
385 {},
386 };
387 MODULE_DEVICE_TABLE(of, ahci_of_match);
388
389 static int brcm_ahci_probe(struct platform_device *pdev)
390 {
391 const struct of_device_id *of_id;
392 struct device *dev = &pdev->dev;
393 struct brcm_ahci_priv *priv;
394 struct ahci_host_priv *hpriv;
395 struct resource *res;
396 int ret;
397
398 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
399 if (!priv)
400 return -ENOMEM;
401
402 of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
403 if (!of_id)
404 return -ENODEV;
405
406 priv->version = (enum brcm_ahci_version)of_id->data;
407 priv->dev = dev;
408
409 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
410 priv->top_ctrl = devm_ioremap_resource(dev, res);
411 if (IS_ERR(priv->top_ctrl))
412 return PTR_ERR(priv->top_ctrl);
413
414 if ((priv->version == BRCM_SATA_BCM7425) ||
415 (priv->version == BRCM_SATA_NSP)) {
416 priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
417 priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
418 }
419
420 brcm_sata_init(priv);
421
422 priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
423 if (!priv->port_mask)
424 return -ENODEV;
425
426 brcm_sata_phys_enable(priv);
427
428 hpriv = ahci_platform_get_resources(pdev);
429 if (IS_ERR(hpriv))
430 return PTR_ERR(hpriv);
431 hpriv->plat_data = priv;
432 hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
433
434 brcm_sata_alpm_init(hpriv);
435
436 ret = ahci_platform_enable_resources(hpriv);
437 if (ret)
438 return ret;
439
440 if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
441 hpriv->flags |= AHCI_HFLAG_NO_NCQ;
442 hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
443
444 ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
445 &ahci_platform_sht);
446 if (ret)
447 return ret;
448
449 dev_info(dev, "Broadcom AHCI SATA3 registered\n");
450
451 return 0;
452 }
453
454 static int brcm_ahci_remove(struct platform_device *pdev)
455 {
456 struct ata_host *host = dev_get_drvdata(&pdev->dev);
457 struct ahci_host_priv *hpriv = host->private_data;
458 struct brcm_ahci_priv *priv = hpriv->plat_data;
459 int ret;
460
461 ret = ata_platform_remove_one(pdev);
462 if (ret)
463 return ret;
464
465 brcm_sata_phys_disable(priv);
466
467 return 0;
468 }
469
470 static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
471
472 static struct platform_driver brcm_ahci_driver = {
473 .probe = brcm_ahci_probe,
474 .remove = brcm_ahci_remove,
475 .driver = {
476 .name = DRV_NAME,
477 .of_match_table = ahci_of_match,
478 .pm = &ahci_brcm_pm_ops,
479 },
480 };
481 module_platform_driver(brcm_ahci_driver);
482
483 MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
484 MODULE_AUTHOR("Brian Norris");
485 MODULE_LICENSE("GPL");
486 MODULE_ALIAS("platform:sata-brcmstb");
Linux with added FPC-III support