drivers/net/wan/pci200syn.c

   1 /*
   2  * Goramo PCI200SYN synchronous serial card driver for Linux
   3  *
   4  * Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl>
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of version 2 of the GNU General Public License
   8  * as published by the Free Software Foundation.
   9  *
  10  * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
  11  *
  12  * Sources of information:
  13  *    Hitachi HD64572 SCA-II User's Manual
  14  *    PLX Technology Inc. PCI9052 Data Book
  15  */
  16
  17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  18
  19 #include <linux/module.h>
  20 #include <linux/kernel.h>
  21 #include <linux/capability.h>
  22 #include <linux/slab.h>
  23 #include <linux/types.h>
  24 #include <linux/fcntl.h>
  25 #include <linux/in.h>
  26 #include <linux/string.h>
  27 #include <linux/errno.h>
  28 #include <linux/init.h>
  29 #include <linux/ioport.h>
  30 #include <linux/moduleparam.h>
  31 #include <linux/netdevice.h>
  32 #include <linux/hdlc.h>
  33 #include <linux/pci.h>
  34 #include <linux/delay.h>
  35 #include <asm/io.h>
  36
  37 #include "hd64572.h"
  38
  39 #undef DEBUG_PKT
  40 #define DEBUG_RINGS
  41
  42 #define PCI200SYN_PLX_SIZE      0x80    /* PLX control window size (128b) */
  43 #define PCI200SYN_SCA_SIZE      0x400   /* SCA window size (1Kb) */
  44 #define MAX_TX_BUFFERS          10
  45
  46 static int pci_clock_freq = 33000000;
  47 #define CLOCK_BASE pci_clock_freq
  48
  49 /*
  50  *      PLX PCI9052 local configuration and shared runtime registers.
  51  *      This structure can be used to access 9052 registers (memory mapped).
  52  */
  53 typedef struct {
  54         u32 loc_addr_range[4];  /* 00-0Ch : Local Address Ranges */
  55         u32 loc_rom_range;      /* 10h : Local ROM Range */
  56         u32 loc_addr_base[4];   /* 14-20h : Local Address Base Addrs */
  57         u32 loc_rom_base;       /* 24h : Local ROM Base */
  58         u32 loc_bus_descr[4];   /* 28-34h : Local Bus Descriptors */
  59         u32 rom_bus_descr;      /* 38h : ROM Bus Descriptor */
  60         u32 cs_base[4];         /* 3C-48h : Chip Select Base Addrs */
  61         u32 intr_ctrl_stat;     /* 4Ch : Interrupt Control/Status */
  62         u32 init_ctrl;          /* 50h : EEPROM ctrl, Init Ctrl, etc */
  63 }plx9052;
  64
  65
  66
  67 typedef struct port_s {
  68         struct napi_struct napi;
  69         struct net_device *netdev;
  70         struct card_s *card;
  71         spinlock_t lock;        /* TX lock */
  72         sync_serial_settings settings;
  73         int rxpart;             /* partial frame received, next frame invalid*/
  74         unsigned short encoding;
  75         unsigned short parity;
  76         u16 rxin;               /* rx ring buffer 'in' pointer */
  77         u16 txin;               /* tx ring buffer 'in' and 'last' pointers */
  78         u16 txlast;
  79         u8 rxs, txs, tmc;       /* SCA registers */
  80         u8 chan;                /* physical port # - 0 or 1 */
  81 }port_t;
  82
  83
  84
  85 typedef struct card_s {
  86         u8 __iomem *rambase;    /* buffer memory base (virtual) */
  87         u8 __iomem *scabase;    /* SCA memory base (virtual) */
  88         plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */
  89         u16 rx_ring_buffers;    /* number of buffers in a ring */
  90         u16 tx_ring_buffers;
  91         u16 buff_offset;        /* offset of first buffer of first channel */
  92         u8 irq;                 /* interrupt request level */
  93
  94         port_t ports[2];
  95 }card_t;
  96
  97
  98 #define get_port(card, port)         (&card->ports[port])
  99 #define sca_flush(card)              (sca_in(IER0, card));
 100
 101 static inline void new_memcpy_toio(char __iomem *dest, char *src, int length)
 102 {
 103         int len;
 104         do {
 105                 len = length > 256 ? 256 : length;
 106                 memcpy_toio(dest, src, len);
 107                 dest += len;
 108                 src += len;
 109                 length -= len;
 110                 readb(dest);
 111         } while (len);
 112 }
 113
 114 #undef memcpy_toio
 115 #define memcpy_toio new_memcpy_toio
 116
 117 #include "hd64572.c"
 118
 119
 120 static void pci200_set_iface(port_t *port)
 121 {
 122         card_t *card = port->card;
 123         u16 msci = get_msci(port);
 124         u8 rxs = port->rxs & CLK_BRG_MASK;
 125         u8 txs = port->txs & CLK_BRG_MASK;
 126
 127         sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
 128                 port->card);
 129         switch(port->settings.clock_type) {
 130         case CLOCK_INT:
 131                 rxs |= CLK_BRG; /* BRG output */
 132                 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
 133                 break;
 134
 135         case CLOCK_TXINT:
 136                 rxs |= CLK_LINE; /* RXC input */
 137                 txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
 138                 break;
 139
 140         case CLOCK_TXFROMRX:
 141                 rxs |= CLK_LINE; /* RXC input */
 142                 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
 143                 break;
 144
 145         default:                /* EXTernal clock */
 146                 rxs |= CLK_LINE; /* RXC input */
 147                 txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
 148                 break;
 149         }
 150
 151         port->rxs = rxs;
 152         port->txs = txs;
 153         sca_out(rxs, msci + RXS, card);
 154         sca_out(txs, msci + TXS, card);
 155         sca_set_port(port);
 156 }
 157
 158
 159
 160 static int pci200_open(struct net_device *dev)
 161 {
 162         port_t *port = dev_to_port(dev);
 163
 164         int result = hdlc_open(dev);
 165         if (result)
 166                 return result;
 167
 168         sca_open(dev);
 169         pci200_set_iface(port);
 170         sca_flush(port->card);
 171         return 0;
 172 }
 173
 174
 175
 176 static int pci200_close(struct net_device *dev)
 177 {
 178         sca_close(dev);
 179         sca_flush(dev_to_port(dev)->card);
 180         hdlc_close(dev);
 181         return 0;
 182 }
 183
 184
 185
 186 static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 187 {
 188         const size_t size = sizeof(sync_serial_settings);
 189         sync_serial_settings new_line;
 190         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
 191         port_t *port = dev_to_port(dev);
 192
 193 #ifdef DEBUG_RINGS
 194         if (cmd == SIOCDEVPRIVATE) {
 195                 sca_dump_rings(dev);
 196                 return 0;
 197         }
 198 #endif
 199         if (cmd != SIOCWANDEV)
 200                 return hdlc_ioctl(dev, ifr, cmd);
 201
 202         switch(ifr->ifr_settings.type) {
 203         case IF_GET_IFACE:
 204                 ifr->ifr_settings.type = IF_IFACE_V35;
 205                 if (ifr->ifr_settings.size < size) {
 206                         ifr->ifr_settings.size = size; /* data size wanted */
 207                         return -ENOBUFS;
 208                 }
 209                 if (copy_to_user(line, &port->settings, size))
 210                         return -EFAULT;
 211                 return 0;
 212
 213         case IF_IFACE_V35:
 214         case IF_IFACE_SYNC_SERIAL:
 215                 if (!capable(CAP_NET_ADMIN))
 216                         return -EPERM;
 217
 218                 if (copy_from_user(&new_line, line, size))
 219                         return -EFAULT;
 220
 221                 if (new_line.clock_type != CLOCK_EXT &&
 222                     new_line.clock_type != CLOCK_TXFROMRX &&
 223                     new_line.clock_type != CLOCK_INT &&
 224                     new_line.clock_type != CLOCK_TXINT)
 225                         return -EINVAL; /* No such clock setting */
 226
 227                 if (new_line.loopback != 0 && new_line.loopback != 1)
 228                         return -EINVAL;
 229
 230                 memcpy(&port->settings, &new_line, size); /* Update settings */
 231                 pci200_set_iface(port);
 232                 sca_flush(port->card);
 233                 return 0;
 234
 235         default:
 236                 return hdlc_ioctl(dev, ifr, cmd);
 237         }
 238 }
 239
 240
 241
 242 static void pci200_pci_remove_one(struct pci_dev *pdev)
 243 {
 244         int i;
 245         card_t *card = pci_get_drvdata(pdev);
 246
 247         for (i = 0; i < 2; i++)
 248                 if (card->ports[i].card)
 249                         unregister_hdlc_device(card->ports[i].netdev);
 250
 251         if (card->irq)
 252                 free_irq(card->irq, card);
 253
 254         if (card->rambase)
 255                 iounmap(card->rambase);
 256         if (card->scabase)
 257                 iounmap(card->scabase);
 258         if (card->plxbase)
 259                 iounmap(card->plxbase);
 260
 261         pci_release_regions(pdev);
 262         pci_disable_device(pdev);
 263         if (card->ports[0].netdev)
 264                 free_netdev(card->ports[0].netdev);
 265         if (card->ports[1].netdev)
 266                 free_netdev(card->ports[1].netdev);
 267         kfree(card);
 268 }
 269
 270 static const struct net_device_ops pci200_ops = {
 271         .ndo_open       = pci200_open,
 272         .ndo_stop       = pci200_close,
 273         .ndo_start_xmit = hdlc_start_xmit,
 274         .ndo_do_ioctl   = pci200_ioctl,
 275 };
 276
 277 static int pci200_pci_init_one(struct pci_dev *pdev,
 278                                const struct pci_device_id *ent)
 279 {
 280         card_t *card;
 281         u32 __iomem *p;
 282         int i;
 283         u32 ramsize;
 284         u32 ramphys;            /* buffer memory base */
 285         u32 scaphys;            /* SCA memory base */
 286         u32 plxphys;            /* PLX registers memory base */
 287
 288         i = pci_enable_device(pdev);
 289         if (i)
 290                 return i;
 291
 292         i = pci_request_regions(pdev, "PCI200SYN");
 293         if (i) {
 294                 pci_disable_device(pdev);
 295                 return i;
 296         }
 297
 298         card = kzalloc(sizeof(card_t), GFP_KERNEL);
 299         if (card == NULL) {
 300                 pci_release_regions(pdev);
 301                 pci_disable_device(pdev);
 302                 return -ENOBUFS;
 303         }
 304         pci_set_drvdata(pdev, card);
 305         card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
 306         card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
 307         if (!card->ports[0].netdev || !card->ports[1].netdev) {
 308                 pr_err("unable to allocate memory\n");
 309                 pci200_pci_remove_one(pdev);
 310                 return -ENOMEM;
 311         }
 312
 313         if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
 314             pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
 315             pci_resource_len(pdev, 3) < 16384) {
 316                 pr_err("invalid card EEPROM parameters\n");
 317                 pci200_pci_remove_one(pdev);
 318                 return -EFAULT;
 319         }
 320
 321         plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
 322         card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);
 323
 324         scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
 325         card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
 326
 327         ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
 328         card->rambase = pci_ioremap_bar(pdev, 3);
 329
 330         if (card->plxbase == NULL ||
 331             card->scabase == NULL ||
 332             card->rambase == NULL) {
 333                 pr_err("ioremap() failed\n");
 334                 pci200_pci_remove_one(pdev);
 335                 return -EFAULT;
 336         }
 337
 338         /* Reset PLX */
 339         p = &card->plxbase->init_ctrl;
 340         writel(readl(p) | 0x40000000, p);
 341         readl(p);               /* Flush the write - do not use sca_flush */
 342         udelay(1);
 343
 344         writel(readl(p) & ~0x40000000, p);
 345         readl(p);               /* Flush the write - do not use sca_flush */
 346         udelay(1);
 347
 348         ramsize = sca_detect_ram(card, card->rambase,
 349                                  pci_resource_len(pdev, 3));
 350
 351         /* number of TX + RX buffers for one port - this is dual port card */
 352         i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU));
 353         card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
 354         card->rx_ring_buffers = i - card->tx_ring_buffers;
 355
 356         card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
 357                                                     card->rx_ring_buffers);
 358
 359         pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
 360                 ramsize / 1024, ramphys,
 361                 pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
 362
 363         if (card->tx_ring_buffers < 1) {
 364                 pr_err("RAM test failed\n");
 365                 pci200_pci_remove_one(pdev);
 366                 return -EFAULT;
 367         }
 368
 369         /* Enable interrupts on the PCI bridge */
 370         p = &card->plxbase->intr_ctrl_stat;
 371         writew(readw(p) | 0x0040, p);
 372
 373         /* Allocate IRQ */
 374         if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
 375                 pr_warn("could not allocate IRQ%d\n", pdev->irq);
 376                 pci200_pci_remove_one(pdev);
 377                 return -EBUSY;
 378         }
 379         card->irq = pdev->irq;
 380
 381         sca_init(card, 0);
 382
 383         for (i = 0; i < 2; i++) {
 384                 port_t *port = &card->ports[i];
 385                 struct net_device *dev = port->netdev;
 386                 hdlc_device *hdlc = dev_to_hdlc(dev);
 387                 port->chan = i;
 388
 389                 spin_lock_init(&port->lock);
 390                 dev->irq = card->irq;
 391                 dev->mem_start = ramphys;
 392                 dev->mem_end = ramphys + ramsize - 1;
 393                 dev->tx_queue_len = 50;
 394                 dev->netdev_ops = &pci200_ops;
 395                 hdlc->attach = sca_attach;
 396                 hdlc->xmit = sca_xmit;
 397                 port->settings.clock_type = CLOCK_EXT;
 398                 port->card = card;
 399                 sca_init_port(port);
 400                 if (register_hdlc_device(dev)) {
 401                         pr_err("unable to register hdlc device\n");
 402                         port->card = NULL;
 403                         pci200_pci_remove_one(pdev);
 404                         return -ENOBUFS;
 405                 }
 406
 407                 netdev_info(dev, "PCI200SYN channel %d\n", port->chan);
 408         }
 409
 410         sca_flush(card);
 411         return 0;
 412 }
 413
 414
 415
 416 static const struct pci_device_id pci200_pci_tbl[] = {
 417         { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
 418           PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
 419         { 0, }
 420 };
 421
 422
 423 static struct pci_driver pci200_pci_driver = {
 424         .name           = "PCI200SYN",
 425         .id_table       = pci200_pci_tbl,
 426         .probe          = pci200_pci_init_one,
 427         .remove         = pci200_pci_remove_one,
 428 };
 429
 430
 431 static int __init pci200_init_module(void)
 432 {
 433         if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
 434                 pr_err("Invalid PCI clock frequency\n");
 435                 return -EINVAL;
 436         }
 437         return pci_register_driver(&pci200_pci_driver);
 438 }
 439
 440
 441
 442 static void __exit pci200_cleanup_module(void)
 443 {
 444         pci_unregister_driver(&pci200_pci_driver);
 445 }
 446
 447 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
 448 MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver");
 449 MODULE_LICENSE("GPL v2");
 450 MODULE_DEVICE_TABLE(pci, pci200_pci_tbl);
 451 module_param(pci_clock_freq, int, 0444);
 452 MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
 453 module_init(pci200_init_module);
 454 module_exit(pci200_cleanup_module);