Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / imx51-babbage.dts
blob552196d8a60a73da762f8a06b578ecc1d67d14c2
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2011 Freescale Semiconductor, Inc.
4 // Copyright 2011 Linaro Ltd.
6 /dts-v1/;
7 #include "imx51.dtsi"
9 / {
10         model = "Freescale i.MX51 Babbage Board";
11         compatible = "fsl,imx51-babbage", "fsl,imx51";
13         chosen {
14                 stdout-path = &uart1;
15         };
17         memory@90000000 {
18                 device_type = "memory";
19                 reg = <0x90000000 0x20000000>;
20         };
22         ckih1 {
23                 clock-frequency = <22579200>;
24         };
26         clk_osc: clk-osc {
27                 compatible = "fixed-clock";
28                 #clock-cells = <0>;
29                 clock-frequency = <26000000>;
30         };
32         clk_osc_gate: clk-osc-gate {
33                 compatible = "gpio-gate-clock";
34                 pinctrl-names = "default";
35                 pinctrl-0 = <&pinctrl_clk26mhz_osc>;
36                 clocks = <&clk_osc>;
37                 #clock-cells = <0>;
38                 enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
39         };
41         clk_audio: clk-audio {
42                 compatible = "gpio-gate-clock";
43                 pinctrl-names = "default";
44                 pinctrl-0 = <&pinctrl_clk26mhz_audio>;
45                 clocks = <&clk_osc_gate>;
46                 #clock-cells = <0>;
47                 enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
48         };
50         clk_usb: clk-usb {
51                 compatible = "gpio-gate-clock";
52                 pinctrl-names = "default";
53                 pinctrl-0 = <&pinctrl_clk26mhz_usb>;
54                 clocks = <&clk_osc_gate>;
55                 #clock-cells = <0>;
56                 enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
57         };
59         display1: disp1 {
60                 compatible = "fsl,imx-parallel-display";
61                 #address-cells = <1>;
62                 #size-cells = <0>;
63                 interface-pix-fmt = "rgb24";
64                 pinctrl-names = "default";
65                 pinctrl-0 = <&pinctrl_ipu_disp1>;
67                 port@0 {
68                 reg = <0>;
70                         display0_in: endpoint {
71                                 remote-endpoint = <&ipu_di0_disp1>;
72                         };
73                 };
75                 port@1 {
76                         reg = <1>;
78                         parallel_display_out: endpoint {
79                                 remote-endpoint = <&tfp410_in>;
80                         };
81                 };
82         };
84         display2: disp2 {
85                 compatible = "fsl,imx-parallel-display";
86                 interface-pix-fmt = "rgb565";
87                 pinctrl-names = "default";
88                 pinctrl-0 = <&pinctrl_ipu_disp2>;
89                 status = "disabled";
90                 display-timings {
91                         native-mode = <&timing1>;
92                         timing1: claawvga {
93                                 clock-frequency = <27000000>;
94                                 hactive = <800>;
95                                 vactive = <480>;
96                                 hback-porch = <40>;
97                                 hfront-porch = <60>;
98                                 vback-porch = <10>;
99                                 vfront-porch = <10>;
100                                 hsync-len = <20>;
101                                 vsync-len = <10>;
102                                 hsync-active = <0>;
103                                 vsync-active = <0>;
104                                 de-active = <1>;
105                                 pixelclk-active = <0>;
106                         };
107                 };
109                 port {
110                         display1_in: endpoint {
111                                 remote-endpoint = <&ipu_di1_disp2>;
112                         };
113                 };
114         };
116         dvi-connector {
117                 compatible = "dvi-connector";
118                 digital;
120                 port {
121                         dvi_connector_in: endpoint {
122                                 remote-endpoint = <&tfp410_out>;
123                         };
124                 };
125         };
127         dvi-encoder {
128                 compatible = "ti,tfp410";
130                 ports {
131                         #address-cells = <1>;
132                         #size-cells = <0>;
134                         port@0 {
135                                 reg = <0>;
137                                 tfp410_in: endpoint {
138                                         remote-endpoint = <&parallel_display_out>;
139                                 };
140                         };
142                         port@1 {
143                                 reg = <1>;
145                                 tfp410_out: endpoint {
146                                         remote-endpoint = <&dvi_connector_in>;
147                                 };
148                         };
149                 };
150         };
152         gpio-keys {
153                 compatible = "gpio-keys";
154                 pinctrl-names = "default";
155                 pinctrl-0 = <&pinctrl_gpio_keys>;
157                 power {
158                         label = "Power Button";
159                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
160                         linux,code = <KEY_POWER>;
161                         wakeup-source;
162                 };
163         };
165         leds {
166                 compatible = "gpio-leds";
167                 pinctrl-names = "default";
168                 pinctrl-0 = <&pinctrl_gpio_leds>;
170                 led-diagnostic {
171                         label = "diagnostic";
172                         gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
173                 };
174         };
176         regulators {
177                 compatible = "simple-bus";
178                 #address-cells = <1>;
179                 #size-cells = <0>;
181                 reg_hub_reset: regulator@0 {
182                         compatible = "regulator-fixed";
183                         pinctrl-names = "default";
184                         pinctrl-0 = <&pinctrl_usbotgreg>;
185                         reg = <0>;
186                         regulator-name = "hub_reset";
187                         regulator-min-microvolt = <5000000>;
188                         regulator-max-microvolt = <5000000>;
189                         gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
190                         enable-active-high;
191                 };
192         };
194         sound {
195                 compatible = "fsl,imx51-babbage-sgtl5000",
196                              "fsl,imx-audio-sgtl5000";
197                 model = "imx51-babbage-sgtl5000";
198                 ssi-controller = <&ssi2>;
199                 audio-codec = <&sgtl5000>;
200                 audio-routing =
201                         "MIC_IN", "Mic Jack",
202                         "Mic Jack", "Mic Bias",
203                         "Headphone Jack", "HP_OUT";
204                 mux-int-port = <2>;
205                 mux-ext-port = <3>;
206         };
208         usbphy1: usbphy1 {
209                 compatible = "usb-nop-xceiv";
210                 pinctrl-names = "default";
211                 pinctrl-0 = <&pinctrl_usbh1reg>;
212                 clocks = <&clk_usb>;
213                 clock-names = "main_clk";
214                 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
215                 vcc-supply = <&vusb_reg>;
216                 #phy-cells = <0>;
217         };
220 &audmux {
221         pinctrl-names = "default";
222         pinctrl-0 = <&pinctrl_audmux>;
223         status = "okay";
226 &ecspi1 {
227         pinctrl-names = "default";
228         pinctrl-0 = <&pinctrl_ecspi1>;
229         cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
230                    <&gpio4 25 GPIO_ACTIVE_LOW>;
231         status = "okay";
233         pmic: mc13892@0 {
234                 compatible = "fsl,mc13892";
235                 pinctrl-names = "default";
236                 pinctrl-0 = <&pinctrl_pmic>;
237                 spi-max-frequency = <6000000>;
238                 spi-cs-high;
239                 reg = <0>;
240                 interrupt-parent = <&gpio1>;
241                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
242                 fsl,mc13xxx-uses-adc;
243                 fsl,mc13xxx-uses-rtc;
245                 regulators {
246                         sw1_reg: sw1 {
247                                 regulator-min-microvolt = <600000>;
248                                 regulator-max-microvolt = <1375000>;
249                                 regulator-boot-on;
250                                 regulator-always-on;
251                         };
253                         sw2_reg: sw2 {
254                                 regulator-min-microvolt = <900000>;
255                                 regulator-max-microvolt = <1850000>;
256                                 regulator-boot-on;
257                                 regulator-always-on;
258                         };
260                         sw3_reg: sw3 {
261                                 regulator-min-microvolt = <1100000>;
262                                 regulator-max-microvolt = <1850000>;
263                                 regulator-boot-on;
264                                 regulator-always-on;
265                         };
267                         sw4_reg: sw4 {
268                                 regulator-min-microvolt = <1100000>;
269                                 regulator-max-microvolt = <1850000>;
270                                 regulator-boot-on;
271                                 regulator-always-on;
272                         };
274                         vpll_reg: vpll {
275                                 regulator-min-microvolt = <1050000>;
276                                 regulator-max-microvolt = <1800000>;
277                                 regulator-boot-on;
278                                 regulator-always-on;
279                         };
281                         vdig_reg: vdig {
282                                 regulator-min-microvolt = <1650000>;
283                                 regulator-max-microvolt = <1650000>;
284                                 regulator-boot-on;
285                         };
287                         vsd_reg: vsd {
288                                 regulator-min-microvolt = <1800000>;
289                                 regulator-max-microvolt = <3150000>;
290                         };
292                         vusb_reg: vusb {
293                                 regulator-boot-on;
294                         };
296                         vusb2_reg: vusb2 {
297                                 regulator-min-microvolt = <2400000>;
298                                 regulator-max-microvolt = <2775000>;
299                                 regulator-boot-on;
300                                 regulator-always-on;
301                         };
303                         vvideo_reg: vvideo {
304                                 regulator-min-microvolt = <2775000>;
305                                 regulator-max-microvolt = <2775000>;
306                         };
308                         vaudio_reg: vaudio {
309                                 regulator-min-microvolt = <2300000>;
310                                 regulator-max-microvolt = <3000000>;
311                         };
313                         vcam_reg: vcam {
314                                 regulator-min-microvolt = <2500000>;
315                                 regulator-max-microvolt = <3000000>;
316                         };
318                         vgen1_reg: vgen1 {
319                                 regulator-min-microvolt = <1200000>;
320                                 regulator-max-microvolt = <1200000>;
321                         };
323                         vgen2_reg: vgen2 {
324                                 regulator-min-microvolt = <1200000>;
325                                 regulator-max-microvolt = <3150000>;
326                                 regulator-always-on;
327                         };
329                         vgen3_reg: vgen3 {
330                                 regulator-min-microvolt = <1800000>;
331                                 regulator-max-microvolt = <2900000>;
332                                 regulator-always-on;
333                         };
334                 };
335         };
337         flash: at45db321d@1 {
338                 #address-cells = <1>;
339                 #size-cells = <1>;
340                 compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
341                 spi-max-frequency = <25000000>;
342                 reg = <1>;
344                 partition@0 {
345                         label = "U-Boot";
346                         reg = <0x0 0x40000>;
347                         read-only;
348                 };
350                 partition@40000 {
351                         label = "Kernel";
352                         reg = <0x40000 0x3c0000>;
353                 };
354         };
357 &esdhc1 {
358         pinctrl-names = "default";
359         pinctrl-0 = <&pinctrl_esdhc1>;
360         cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
361         wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
362         status = "okay";
365 &esdhc2 {
366         pinctrl-names = "default";
367         pinctrl-0 = <&pinctrl_esdhc2>;
368         cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
369         wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
370         status = "okay";
373 &fec {
374         pinctrl-names = "default";
375         pinctrl-0 = <&pinctrl_fec>;
376         phy-mode = "mii";
377         phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
378         phy-reset-duration = <1>;
379         status = "okay";
382 &i2c1 {
383         pinctrl-names = "default";
384         pinctrl-0 = <&pinctrl_i2c1>;
385         status = "okay";
388 &i2c2 {
389         pinctrl-names = "default";
390         pinctrl-0 = <&pinctrl_i2c2>;
391         status = "okay";
393         sgtl5000: codec@a {
394                 compatible = "fsl,sgtl5000";
395                 reg = <0x0a>;
396                 #sound-dai-cells = <0>;
397                 clocks = <&clk_audio>;
398                 VDDA-supply = <&vdig_reg>;
399                 VDDIO-supply = <&vvideo_reg>;
400         };
403 &ipu_di0_disp1 {
404         remote-endpoint = <&display0_in>;
407 &ipu_di1_disp2 {
408         remote-endpoint = <&display1_in>;
411 &kpp {
412         pinctrl-names = "default";
413         pinctrl-0 = <&pinctrl_kpp>;
414         linux,keymap = <
415                 MATRIX_KEY(0, 0, KEY_UP)
416                 MATRIX_KEY(0, 1, KEY_DOWN)
417                 MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
418                 MATRIX_KEY(0, 3, KEY_HOME)
419                 MATRIX_KEY(1, 0, KEY_RIGHT)
420                 MATRIX_KEY(1, 1, KEY_LEFT)
421                 MATRIX_KEY(1, 2, KEY_ENTER)
422                 MATRIX_KEY(1, 3, KEY_VOLUMEUP)
423                 MATRIX_KEY(2, 0, KEY_F6)
424                 MATRIX_KEY(2, 1, KEY_F8)
425                 MATRIX_KEY(2, 2, KEY_F9)
426                 MATRIX_KEY(2, 3, KEY_F10)
427                 MATRIX_KEY(3, 0, KEY_F1)
428                 MATRIX_KEY(3, 1, KEY_F2)
429                 MATRIX_KEY(3, 2, KEY_F3)
430                 MATRIX_KEY(3, 3, KEY_POWER)
431         >;
432         status = "okay";
435 &pmu {
436         secure-reg-access;
439 &ssi2 {
440         status = "okay";
443 &uart1 {
444         pinctrl-names = "default";
445         pinctrl-0 = <&pinctrl_uart1>;
446         uart-has-rtscts;
447         status = "okay";
450 &uart2 {
451         pinctrl-names = "default";
452         pinctrl-0 = <&pinctrl_uart2>;
453         status = "okay";
456 &uart3 {
457         pinctrl-names = "default";
458         pinctrl-0 = <&pinctrl_uart3>;
459         uart-has-rtscts;
460         status = "okay";
463 &usbh1 {
464         pinctrl-names = "default";
465         pinctrl-0 = <&pinctrl_usbh1>;
466         vbus-supply = <&reg_hub_reset>;
467         fsl,usbphy = <&usbphy1>;
468         phy_type = "ulpi";
469         status = "okay";
472 &usbphy0 {
473         vcc-supply = <&vusb_reg>;
476 &usbotg {
477         dr_mode = "otg";
478         disable-over-current;
479         phy_type = "utmi_wide";
480         status = "okay";
483 &iomuxc {
484         imx51-babbage {
485                 pinctrl_audmux: audmuxgrp {
486                         fsl,pins = <
487                                 MX51_PAD_AUD3_BB_TXD__AUD3_TXD          0x80000000
488                                 MX51_PAD_AUD3_BB_RXD__AUD3_RXD          0x80000000
489                                 MX51_PAD_AUD3_BB_CK__AUD3_TXC           0x80000000
490                                 MX51_PAD_AUD3_BB_FS__AUD3_TXFS          0x80000000
491                         >;
492                 };
494                 pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
495                         fsl,pins = <
496                                 MX51_PAD_CSPI1_RDY__GPIO4_26            0x85
497                         >;
498                 };
500                 pinctrl_clk26mhz_osc: clk26mhzoscgrp {
501                         fsl,pins = <
502                                 MX51_PAD_DI1_PIN12__GPIO3_1             0x85
503                         >;
504                 };
506                 pinctrl_clk26mhz_usb: clk26mhzusbgrp {
507                         fsl,pins = <
508                                 MX51_PAD_EIM_D17__GPIO2_1               0x85
509                         >;
510                 };
512                 pinctrl_ecspi1: ecspi1grp {
513                         fsl,pins = <
514                                 MX51_PAD_CSPI1_MISO__ECSPI1_MISO        0x185
515                                 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI        0x185
516                                 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK        0x185
517                                 MX51_PAD_CSPI1_SS0__GPIO4_24            0x85 /* CS0 */
518                                 MX51_PAD_CSPI1_SS1__GPIO4_25            0x85 /* CS1 */
519                         >;
520                 };
522                 pinctrl_esdhc1: esdhc1grp {
523                         fsl,pins = <
524                                 MX51_PAD_SD1_CMD__SD1_CMD               0x400020d5
525                                 MX51_PAD_SD1_CLK__SD1_CLK               0x20d5
526                                 MX51_PAD_SD1_DATA0__SD1_DATA0           0x20d5
527                                 MX51_PAD_SD1_DATA1__SD1_DATA1           0x20d5
528                                 MX51_PAD_SD1_DATA2__SD1_DATA2           0x20d5
529                                 MX51_PAD_SD1_DATA3__SD1_DATA3           0x20d5
530                                 MX51_PAD_GPIO1_0__GPIO1_0               0x100
531                                 MX51_PAD_GPIO1_1__GPIO1_1               0x100
532                         >;
533                 };
535                 pinctrl_esdhc2: esdhc2grp {
536                         fsl,pins = <
537                                 MX51_PAD_SD2_CMD__SD2_CMD               0x400020d5
538                                 MX51_PAD_SD2_CLK__SD2_CLK               0x20d5
539                                 MX51_PAD_SD2_DATA0__SD2_DATA0           0x20d5
540                                 MX51_PAD_SD2_DATA1__SD2_DATA1           0x20d5
541                                 MX51_PAD_SD2_DATA2__SD2_DATA2           0x20d5
542                                 MX51_PAD_SD2_DATA3__SD2_DATA3           0x20d5
543                                 MX51_PAD_GPIO1_5__GPIO1_5               0x100 /* WP */
544                                 MX51_PAD_GPIO1_6__GPIO1_6               0x100 /* CD */
545                         >;
546                 };
548                 pinctrl_fec: fecgrp {
549                         fsl,pins = <
550                                 MX51_PAD_EIM_EB2__FEC_MDIO              0x000001f5
551                                 MX51_PAD_EIM_EB3__FEC_RDATA1            0x00000085
552                                 MX51_PAD_EIM_CS2__FEC_RDATA2            0x00000085
553                                 MX51_PAD_EIM_CS3__FEC_RDATA3            0x00000085
554                                 MX51_PAD_EIM_CS4__FEC_RX_ER             0x00000180
555                                 MX51_PAD_EIM_CS5__FEC_CRS               0x00000180
556                                 MX51_PAD_NANDF_RB2__FEC_COL             0x00000180
557                                 MX51_PAD_NANDF_RB3__FEC_RX_CLK          0x00000180
558                                 MX51_PAD_NANDF_D9__FEC_RDATA0           0x00002180
559                                 MX51_PAD_NANDF_D8__FEC_TDATA0           0x00002004
560                                 MX51_PAD_NANDF_CS2__FEC_TX_ER           0x00002004
561                                 MX51_PAD_NANDF_CS3__FEC_MDC             0x00002004
562                                 MX51_PAD_NANDF_CS4__FEC_TDATA1          0x00002004
563                                 MX51_PAD_NANDF_CS5__FEC_TDATA2          0x00002004
564                                 MX51_PAD_NANDF_CS6__FEC_TDATA3          0x00002004
565                                 MX51_PAD_NANDF_CS7__FEC_TX_EN           0x00002004
566                                 MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK      0x00002180
567                                 MX51_PAD_NANDF_D11__FEC_RX_DV           0x000020a4
568                                 MX51_PAD_EIM_A20__GPIO2_14              0x00000085 /* Phy Reset */
569                         >;
570                 };
572                 pinctrl_gpio_keys: gpiokeysgrp {
573                         fsl,pins = <
574                                 MX51_PAD_EIM_A27__GPIO2_21              0x5
575                         >;
576                 };
578                 pinctrl_gpio_leds: gpioledsgrp {
579                         fsl,pins = <
580                                 MX51_PAD_EIM_D22__GPIO2_6               0x80000000
581                         >;
582                 };
584                 pinctrl_i2c1: i2c1grp {
585                         fsl,pins = <
586                                 MX51_PAD_EIM_D19__I2C1_SCL              0x400001ed
587                                 MX51_PAD_EIM_D16__I2C1_SDA              0x400001ed
588                         >;
589                 };
591                 pinctrl_i2c2: i2c2grp {
592                         fsl,pins = <
593                                 MX51_PAD_KEY_COL4__I2C2_SCL             0x400001ed
594                                 MX51_PAD_KEY_COL5__I2C2_SDA             0x400001ed
595                         >;
596                 };
598                 pinctrl_ipu_disp1: ipudisp1grp {
599                         fsl,pins = <
600                                 MX51_PAD_DISP1_DAT0__DISP1_DAT0         0x5
601                                 MX51_PAD_DISP1_DAT1__DISP1_DAT1         0x5
602                                 MX51_PAD_DISP1_DAT2__DISP1_DAT2         0x5
603                                 MX51_PAD_DISP1_DAT3__DISP1_DAT3         0x5
604                                 MX51_PAD_DISP1_DAT4__DISP1_DAT4         0x5
605                                 MX51_PAD_DISP1_DAT5__DISP1_DAT5         0x5
606                                 MX51_PAD_DISP1_DAT6__DISP1_DAT6         0x5
607                                 MX51_PAD_DISP1_DAT7__DISP1_DAT7         0x5
608                                 MX51_PAD_DISP1_DAT8__DISP1_DAT8         0x5
609                                 MX51_PAD_DISP1_DAT9__DISP1_DAT9         0x5
610                                 MX51_PAD_DISP1_DAT10__DISP1_DAT10       0x5
611                                 MX51_PAD_DISP1_DAT11__DISP1_DAT11       0x5
612                                 MX51_PAD_DISP1_DAT12__DISP1_DAT12       0x5
613                                 MX51_PAD_DISP1_DAT13__DISP1_DAT13       0x5
614                                 MX51_PAD_DISP1_DAT14__DISP1_DAT14       0x5
615                                 MX51_PAD_DISP1_DAT15__DISP1_DAT15       0x5
616                                 MX51_PAD_DISP1_DAT16__DISP1_DAT16       0x5
617                                 MX51_PAD_DISP1_DAT17__DISP1_DAT17       0x5
618                                 MX51_PAD_DISP1_DAT18__DISP1_DAT18       0x5
619                                 MX51_PAD_DISP1_DAT19__DISP1_DAT19       0x5
620                                 MX51_PAD_DISP1_DAT20__DISP1_DAT20       0x5
621                                 MX51_PAD_DISP1_DAT21__DISP1_DAT21       0x5
622                                 MX51_PAD_DISP1_DAT22__DISP1_DAT22       0x5
623                                 MX51_PAD_DISP1_DAT23__DISP1_DAT23       0x5
624                                 MX51_PAD_DI1_PIN2__DI1_PIN2             0x5
625                                 MX51_PAD_DI1_PIN3__DI1_PIN3             0x5
626                         >;
627                 };
629                 pinctrl_ipu_disp2: ipudisp2grp {
630                         fsl,pins = <
631                                 MX51_PAD_DISP2_DAT0__DISP2_DAT0         0x5
632                                 MX51_PAD_DISP2_DAT1__DISP2_DAT1         0x5
633                                 MX51_PAD_DISP2_DAT2__DISP2_DAT2         0x5
634                                 MX51_PAD_DISP2_DAT3__DISP2_DAT3         0x5
635                                 MX51_PAD_DISP2_DAT4__DISP2_DAT4         0x5
636                                 MX51_PAD_DISP2_DAT5__DISP2_DAT5         0x5
637                                 MX51_PAD_DISP2_DAT6__DISP2_DAT6         0x5
638                                 MX51_PAD_DISP2_DAT7__DISP2_DAT7         0x5
639                                 MX51_PAD_DISP2_DAT8__DISP2_DAT8         0x5
640                                 MX51_PAD_DISP2_DAT9__DISP2_DAT9         0x5
641                                 MX51_PAD_DISP2_DAT10__DISP2_DAT10       0x5
642                                 MX51_PAD_DISP2_DAT11__DISP2_DAT11       0x5
643                                 MX51_PAD_DISP2_DAT12__DISP2_DAT12       0x5
644                                 MX51_PAD_DISP2_DAT13__DISP2_DAT13       0x5
645                                 MX51_PAD_DISP2_DAT14__DISP2_DAT14       0x5
646                                 MX51_PAD_DISP2_DAT15__DISP2_DAT15       0x5
647                                 MX51_PAD_DI2_PIN2__DI2_PIN2             0x5
648                                 MX51_PAD_DI2_PIN3__DI2_PIN3             0x5
649                                 MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK     0x5
650                                 MX51_PAD_DI_GP4__DI2_PIN15              0x5
651                         >;
652                 };
654                 pinctrl_kpp: kppgrp {
655                         fsl,pins = <
656                                 MX51_PAD_KEY_ROW0__KEY_ROW0             0xe0
657                                 MX51_PAD_KEY_ROW1__KEY_ROW1             0xe0
658                                 MX51_PAD_KEY_ROW2__KEY_ROW2             0xe0
659                                 MX51_PAD_KEY_ROW3__KEY_ROW3             0xe0
660                                 MX51_PAD_KEY_COL0__KEY_COL0             0xe8
661                                 MX51_PAD_KEY_COL1__KEY_COL1             0xe8
662                                 MX51_PAD_KEY_COL2__KEY_COL2             0xe8
663                                 MX51_PAD_KEY_COL3__KEY_COL3             0xe8
664                         >;
665                 };
667                 pinctrl_pmic: pmicgrp {
668                         fsl,pins = <
669                                 MX51_PAD_GPIO1_8__GPIO1_8               0xe5 /* IRQ */
670                         >;
671                 };
673                 pinctrl_uart1: uart1grp {
674                         fsl,pins = <
675                                 MX51_PAD_UART1_RXD__UART1_RXD           0x1c5
676                                 MX51_PAD_UART1_TXD__UART1_TXD           0x1c5
677                                 MX51_PAD_UART1_RTS__UART1_RTS           0x1c5
678                                 MX51_PAD_UART1_CTS__UART1_CTS           0x1c5
679                         >;
680                 };
682                 pinctrl_uart2: uart2grp {
683                         fsl,pins = <
684                                 MX51_PAD_UART2_RXD__UART2_RXD           0x1c5
685                                 MX51_PAD_UART2_TXD__UART2_TXD           0x1c5
686                         >;
687                 };
689                 pinctrl_uart3: uart3grp {
690                         fsl,pins = <
691                                 MX51_PAD_EIM_D25__UART3_RXD             0x1c5
692                                 MX51_PAD_EIM_D26__UART3_TXD             0x1c5
693                                 MX51_PAD_EIM_D27__UART3_RTS             0x1c5
694                                 MX51_PAD_EIM_D24__UART3_CTS             0x1c5
695                         >;
696                 };
698                 pinctrl_usbh1: usbh1grp {
699                         fsl,pins = <
700                                 MX51_PAD_USBH1_CLK__USBH1_CLK           0x80000000
701                                 MX51_PAD_USBH1_DIR__USBH1_DIR           0x80000000
702                                 MX51_PAD_USBH1_NXT__USBH1_NXT           0x80000000
703                                 MX51_PAD_USBH1_DATA0__USBH1_DATA0       0x80000000
704                                 MX51_PAD_USBH1_DATA1__USBH1_DATA1       0x80000000
705                                 MX51_PAD_USBH1_DATA2__USBH1_DATA2       0x80000000
706                                 MX51_PAD_USBH1_DATA3__USBH1_DATA3       0x80000000
707                                 MX51_PAD_USBH1_DATA4__USBH1_DATA4       0x80000000
708                                 MX51_PAD_USBH1_DATA5__USBH1_DATA5       0x80000000
709                                 MX51_PAD_USBH1_DATA6__USBH1_DATA6       0x80000000
710                                 MX51_PAD_USBH1_DATA7__USBH1_DATA7       0x80000000
711                         >;
712                 };
714                 pinctrl_usbh1reg: usbh1reggrp {
715                         fsl,pins = <
716                                 MX51_PAD_EIM_D21__GPIO2_5               0x85
717                         >;
718                 };
720                 pinctrl_usbotgreg: usbotgreggrp {
721                         fsl,pins = <
722                                 MX51_PAD_GPIO1_7__GPIO1_7               0x85
723                         >;
724                 };
725         };