PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / dma / pl330.c
blob73fa9b7a10ab36b05dbc54c2850325c1e1a0b566
1 /*
2 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
5 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6 * Jaswinder Singh <jassi.brar@samsung.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/scatterlist.h>
27 #include <linux/of.h>
28 #include <linux/of_dma.h>
29 #include <linux/err.h>
31 #include "dmaengine.h"
32 #define PL330_MAX_CHAN 8
33 #define PL330_MAX_IRQS 32
34 #define PL330_MAX_PERI 32
36 enum pl330_srccachectrl {
37 SCCTRL0, /* Noncacheable and nonbufferable */
38 SCCTRL1, /* Bufferable only */
39 SCCTRL2, /* Cacheable, but do not allocate */
40 SCCTRL3, /* Cacheable and bufferable, but do not allocate */
41 SINVALID1,
42 SINVALID2,
43 SCCTRL6, /* Cacheable write-through, allocate on reads only */
44 SCCTRL7, /* Cacheable write-back, allocate on reads only */
47 enum pl330_dstcachectrl {
48 DCCTRL0, /* Noncacheable and nonbufferable */
49 DCCTRL1, /* Bufferable only */
50 DCCTRL2, /* Cacheable, but do not allocate */
51 DCCTRL3, /* Cacheable and bufferable, but do not allocate */
52 DINVALID1, /* AWCACHE = 0x1000 */
53 DINVALID2,
54 DCCTRL6, /* Cacheable write-through, allocate on writes only */
55 DCCTRL7, /* Cacheable write-back, allocate on writes only */
58 enum pl330_byteswap {
59 SWAP_NO,
60 SWAP_2,
61 SWAP_4,
62 SWAP_8,
63 SWAP_16,
66 enum pl330_reqtype {
67 MEMTOMEM,
68 MEMTODEV,
69 DEVTOMEM,
70 DEVTODEV,
73 /* Register and Bit field Definitions */
74 #define DS 0x0
75 #define DS_ST_STOP 0x0
76 #define DS_ST_EXEC 0x1
77 #define DS_ST_CMISS 0x2
78 #define DS_ST_UPDTPC 0x3
79 #define DS_ST_WFE 0x4
80 #define DS_ST_ATBRR 0x5
81 #define DS_ST_QBUSY 0x6
82 #define DS_ST_WFP 0x7
83 #define DS_ST_KILL 0x8
84 #define DS_ST_CMPLT 0x9
85 #define DS_ST_FLTCMP 0xe
86 #define DS_ST_FAULT 0xf
88 #define DPC 0x4
89 #define INTEN 0x20
90 #define ES 0x24
91 #define INTSTATUS 0x28
92 #define INTCLR 0x2c
93 #define FSM 0x30
94 #define FSC 0x34
95 #define FTM 0x38
97 #define _FTC 0x40
98 #define FTC(n) (_FTC + (n)*0x4)
100 #define _CS 0x100
101 #define CS(n) (_CS + (n)*0x8)
102 #define CS_CNS (1 << 21)
104 #define _CPC 0x104
105 #define CPC(n) (_CPC + (n)*0x8)
107 #define _SA 0x400
108 #define SA(n) (_SA + (n)*0x20)
110 #define _DA 0x404
111 #define DA(n) (_DA + (n)*0x20)
113 #define _CC 0x408
114 #define CC(n) (_CC + (n)*0x20)
116 #define CC_SRCINC (1 << 0)
117 #define CC_DSTINC (1 << 14)
118 #define CC_SRCPRI (1 << 8)
119 #define CC_DSTPRI (1 << 22)
120 #define CC_SRCNS (1 << 9)
121 #define CC_DSTNS (1 << 23)
122 #define CC_SRCIA (1 << 10)
123 #define CC_DSTIA (1 << 24)
124 #define CC_SRCBRSTLEN_SHFT 4
125 #define CC_DSTBRSTLEN_SHFT 18
126 #define CC_SRCBRSTSIZE_SHFT 1
127 #define CC_DSTBRSTSIZE_SHFT 15
128 #define CC_SRCCCTRL_SHFT 11
129 #define CC_SRCCCTRL_MASK 0x7
130 #define CC_DSTCCTRL_SHFT 25
131 #define CC_DRCCCTRL_MASK 0x7
132 #define CC_SWAP_SHFT 28
134 #define _LC0 0x40c
135 #define LC0(n) (_LC0 + (n)*0x20)
137 #define _LC1 0x410
138 #define LC1(n) (_LC1 + (n)*0x20)
140 #define DBGSTATUS 0xd00
141 #define DBG_BUSY (1 << 0)
143 #define DBGCMD 0xd04
144 #define DBGINST0 0xd08
145 #define DBGINST1 0xd0c
147 #define CR0 0xe00
148 #define CR1 0xe04
149 #define CR2 0xe08
150 #define CR3 0xe0c
151 #define CR4 0xe10
152 #define CRD 0xe14
154 #define PERIPH_ID 0xfe0
155 #define PERIPH_REV_SHIFT 20
156 #define PERIPH_REV_MASK 0xf
157 #define PERIPH_REV_R0P0 0
158 #define PERIPH_REV_R1P0 1
159 #define PERIPH_REV_R1P1 2
161 #define CR0_PERIPH_REQ_SET (1 << 0)
162 #define CR0_BOOT_EN_SET (1 << 1)
163 #define CR0_BOOT_MAN_NS (1 << 2)
164 #define CR0_NUM_CHANS_SHIFT 4
165 #define CR0_NUM_CHANS_MASK 0x7
166 #define CR0_NUM_PERIPH_SHIFT 12
167 #define CR0_NUM_PERIPH_MASK 0x1f
168 #define CR0_NUM_EVENTS_SHIFT 17
169 #define CR0_NUM_EVENTS_MASK 0x1f
171 #define CR1_ICACHE_LEN_SHIFT 0
172 #define CR1_ICACHE_LEN_MASK 0x7
173 #define CR1_NUM_ICACHELINES_SHIFT 4
174 #define CR1_NUM_ICACHELINES_MASK 0xf
176 #define CRD_DATA_WIDTH_SHIFT 0
177 #define CRD_DATA_WIDTH_MASK 0x7
178 #define CRD_WR_CAP_SHIFT 4
179 #define CRD_WR_CAP_MASK 0x7
180 #define CRD_WR_Q_DEP_SHIFT 8
181 #define CRD_WR_Q_DEP_MASK 0xf
182 #define CRD_RD_CAP_SHIFT 12
183 #define CRD_RD_CAP_MASK 0x7
184 #define CRD_RD_Q_DEP_SHIFT 16
185 #define CRD_RD_Q_DEP_MASK 0xf
186 #define CRD_DATA_BUFF_SHIFT 20
187 #define CRD_DATA_BUFF_MASK 0x3ff
189 #define PART 0x330
190 #define DESIGNER 0x41
191 #define REVISION 0x0
192 #define INTEG_CFG 0x0
193 #define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
195 #define PL330_STATE_STOPPED (1 << 0)
196 #define PL330_STATE_EXECUTING (1 << 1)
197 #define PL330_STATE_WFE (1 << 2)
198 #define PL330_STATE_FAULTING (1 << 3)
199 #define PL330_STATE_COMPLETING (1 << 4)
200 #define PL330_STATE_WFP (1 << 5)
201 #define PL330_STATE_KILLING (1 << 6)
202 #define PL330_STATE_FAULT_COMPLETING (1 << 7)
203 #define PL330_STATE_CACHEMISS (1 << 8)
204 #define PL330_STATE_UPDTPC (1 << 9)
205 #define PL330_STATE_ATBARRIER (1 << 10)
206 #define PL330_STATE_QUEUEBUSY (1 << 11)
207 #define PL330_STATE_INVALID (1 << 15)
209 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
210 | PL330_STATE_WFE | PL330_STATE_FAULTING)
212 #define CMD_DMAADDH 0x54
213 #define CMD_DMAEND 0x00
214 #define CMD_DMAFLUSHP 0x35
215 #define CMD_DMAGO 0xa0
216 #define CMD_DMALD 0x04
217 #define CMD_DMALDP 0x25
218 #define CMD_DMALP 0x20
219 #define CMD_DMALPEND 0x28
220 #define CMD_DMAKILL 0x01
221 #define CMD_DMAMOV 0xbc
222 #define CMD_DMANOP 0x18
223 #define CMD_DMARMB 0x12
224 #define CMD_DMASEV 0x34
225 #define CMD_DMAST 0x08
226 #define CMD_DMASTP 0x29
227 #define CMD_DMASTZ 0x0c
228 #define CMD_DMAWFE 0x36
229 #define CMD_DMAWFP 0x30
230 #define CMD_DMAWMB 0x13
232 #define SZ_DMAADDH 3
233 #define SZ_DMAEND 1
234 #define SZ_DMAFLUSHP 2
235 #define SZ_DMALD 1
236 #define SZ_DMALDP 2
237 #define SZ_DMALP 2
238 #define SZ_DMALPEND 2
239 #define SZ_DMAKILL 1
240 #define SZ_DMAMOV 6
241 #define SZ_DMANOP 1
242 #define SZ_DMARMB 1
243 #define SZ_DMASEV 2
244 #define SZ_DMAST 1
245 #define SZ_DMASTP 2
246 #define SZ_DMASTZ 1
247 #define SZ_DMAWFE 2
248 #define SZ_DMAWFP 2
249 #define SZ_DMAWMB 1
250 #define SZ_DMAGO 6
252 #define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
253 #define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
255 #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
256 #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
259 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
260 * at 1byte/burst for P<->M and M<->M respectively.
261 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
262 * should be enough for P<->M and M<->M respectively.
264 #define MCODE_BUFF_PER_REQ 256
266 /* If the _pl330_req is available to the client */
267 #define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
269 /* Use this _only_ to wait on transient states */
270 #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
272 #ifdef PL330_DEBUG_MCGEN
273 static unsigned cmd_line;
274 #define PL330_DBGCMD_DUMP(off, x...) do { \
275 printk("%x:", cmd_line); \
276 printk(x); \
277 cmd_line += off; \
278 } while (0)
279 #define PL330_DBGMC_START(addr) (cmd_line = addr)
280 #else
281 #define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
282 #define PL330_DBGMC_START(addr) do {} while (0)
283 #endif
285 /* The number of default descriptors */
287 #define NR_DEFAULT_DESC 16
289 /* Populated by the PL330 core driver for DMA API driver's info */
290 struct pl330_config {
291 u32 periph_id;
292 #define DMAC_MODE_NS (1 << 0)
293 unsigned int mode;
294 unsigned int data_bus_width:10; /* In number of bits */
295 unsigned int data_buf_dep:10;
296 unsigned int num_chan:4;
297 unsigned int num_peri:6;
298 u32 peri_ns;
299 unsigned int num_events:6;
300 u32 irq_ns;
303 /* Handle to the DMAC provided to the PL330 core */
304 struct pl330_info {
305 /* Owning device */
306 struct device *dev;
307 /* Size of MicroCode buffers for each channel. */
308 unsigned mcbufsz;
309 /* ioremap'ed address of PL330 registers. */
310 void __iomem *base;
311 /* Client can freely use it. */
312 void *client_data;
313 /* PL330 core data, Client must not touch it. */
314 void *pl330_data;
315 /* Populated by the PL330 core driver during pl330_add */
316 struct pl330_config pcfg;
318 * If the DMAC has some reset mechanism, then the
319 * client may want to provide pointer to the method.
321 void (*dmac_reset)(struct pl330_info *pi);
325 * Request Configuration.
326 * The PL330 core does not modify this and uses the last
327 * working configuration if the request doesn't provide any.
329 * The Client may want to provide this info only for the
330 * first request and a request with new settings.
332 struct pl330_reqcfg {
333 /* Address Incrementing */
334 unsigned dst_inc:1;
335 unsigned src_inc:1;
338 * For now, the SRC & DST protection levels
339 * and burst size/length are assumed same.
341 bool nonsecure;
342 bool privileged;
343 bool insnaccess;
344 unsigned brst_len:5;
345 unsigned brst_size:3; /* in power of 2 */
347 enum pl330_dstcachectrl dcctl;
348 enum pl330_srccachectrl scctl;
349 enum pl330_byteswap swap;
350 struct pl330_config *pcfg;
354 * One cycle of DMAC operation.
355 * There may be more than one xfer in a request.
357 struct pl330_xfer {
358 u32 src_addr;
359 u32 dst_addr;
360 /* Size to xfer */
361 u32 bytes;
363 * Pointer to next xfer in the list.
364 * The last xfer in the req must point to NULL.
366 struct pl330_xfer *next;
369 /* The xfer callbacks are made with one of these arguments. */
370 enum pl330_op_err {
371 /* The all xfers in the request were success. */
372 PL330_ERR_NONE,
373 /* If req aborted due to global error. */
374 PL330_ERR_ABORT,
375 /* If req failed due to problem with Channel. */
376 PL330_ERR_FAIL,
379 /* A request defining Scatter-Gather List ending with NULL xfer. */
380 struct pl330_req {
381 enum pl330_reqtype rqtype;
382 /* Index of peripheral for the xfer. */
383 unsigned peri:5;
384 /* Unique token for this xfer, set by the client. */
385 void *token;
386 /* Callback to be called after xfer. */
387 void (*xfer_cb)(void *token, enum pl330_op_err err);
388 /* If NULL, req will be done at last set parameters. */
389 struct pl330_reqcfg *cfg;
390 /* Pointer to first xfer in the request. */
391 struct pl330_xfer *x;
392 /* Hook to attach to DMAC's list of reqs with due callback */
393 struct list_head rqd;
397 * To know the status of the channel and DMAC, the client
398 * provides a pointer to this structure. The PL330 core
399 * fills it with current information.
401 struct pl330_chanstatus {
403 * If the DMAC engine halted due to some error,
404 * the client should remove-add DMAC.
406 bool dmac_halted;
408 * If channel is halted due to some error,
409 * the client should ABORT/FLUSH and START the channel.
411 bool faulting;
412 /* Location of last load */
413 u32 src_addr;
414 /* Location of last store */
415 u32 dst_addr;
417 * Pointer to the currently active req, NULL if channel is
418 * inactive, even though the requests may be present.
420 struct pl330_req *top_req;
421 /* Pointer to req waiting second in the queue if any. */
422 struct pl330_req *wait_req;
425 enum pl330_chan_op {
426 /* Start the channel */
427 PL330_OP_START,
428 /* Abort the active xfer */
429 PL330_OP_ABORT,
430 /* Stop xfer and flush queue */
431 PL330_OP_FLUSH,
434 struct _xfer_spec {
435 u32 ccr;
436 struct pl330_req *r;
437 struct pl330_xfer *x;
440 enum dmamov_dst {
441 SAR = 0,
442 CCR,
443 DAR,
446 enum pl330_dst {
447 SRC = 0,
448 DST,
451 enum pl330_cond {
452 SINGLE,
453 BURST,
454 ALWAYS,
457 struct _pl330_req {
458 u32 mc_bus;
459 void *mc_cpu;
460 /* Number of bytes taken to setup MC for the req */
461 u32 mc_len;
462 struct pl330_req *r;
465 /* ToBeDone for tasklet */
466 struct _pl330_tbd {
467 bool reset_dmac;
468 bool reset_mngr;
469 u8 reset_chan;
472 /* A DMAC Thread */
473 struct pl330_thread {
474 u8 id;
475 int ev;
476 /* If the channel is not yet acquired by any client */
477 bool free;
478 /* Parent DMAC */
479 struct pl330_dmac *dmac;
480 /* Only two at a time */
481 struct _pl330_req req[2];
482 /* Index of the last enqueued request */
483 unsigned lstenq;
484 /* Index of the last submitted request or -1 if the DMA is stopped */
485 int req_running;
488 enum pl330_dmac_state {
489 UNINIT,
490 INIT,
491 DYING,
494 /* A DMAC */
495 struct pl330_dmac {
496 spinlock_t lock;
497 /* Holds list of reqs with due callbacks */
498 struct list_head req_done;
499 /* Pointer to platform specific stuff */
500 struct pl330_info *pinfo;
501 /* Maximum possible events/irqs */
502 int events[32];
503 /* BUS address of MicroCode buffer */
504 dma_addr_t mcode_bus;
505 /* CPU address of MicroCode buffer */
506 void *mcode_cpu;
507 /* List of all Channel threads */
508 struct pl330_thread *channels;
509 /* Pointer to the MANAGER thread */
510 struct pl330_thread *manager;
511 /* To handle bad news in interrupt */
512 struct tasklet_struct tasks;
513 struct _pl330_tbd dmac_tbd;
514 /* State of DMAC operation */
515 enum pl330_dmac_state state;
518 enum desc_status {
519 /* In the DMAC pool */
520 FREE,
522 * Allocated to some channel during prep_xxx
523 * Also may be sitting on the work_list.
525 PREP,
527 * Sitting on the work_list and already submitted
528 * to the PL330 core. Not more than two descriptors
529 * of a channel can be BUSY at any time.
531 BUSY,
533 * Sitting on the channel work_list but xfer done
534 * by PL330 core
536 DONE,
539 struct dma_pl330_chan {
540 /* Schedule desc completion */
541 struct tasklet_struct task;
543 /* DMA-Engine Channel */
544 struct dma_chan chan;
546 /* List of submitted descriptors */
547 struct list_head submitted_list;
548 /* List of issued descriptors */
549 struct list_head work_list;
550 /* List of completed descriptors */
551 struct list_head completed_list;
553 /* Pointer to the DMAC that manages this channel,
554 * NULL if the channel is available to be acquired.
555 * As the parent, this DMAC also provides descriptors
556 * to the channel.
558 struct dma_pl330_dmac *dmac;
560 /* To protect channel manipulation */
561 spinlock_t lock;
563 /* Token of a hardware channel thread of PL330 DMAC
564 * NULL if the channel is available to be acquired.
566 void *pl330_chid;
568 /* For D-to-M and M-to-D channels */
569 int burst_sz; /* the peripheral fifo width */
570 int burst_len; /* the number of burst */
571 dma_addr_t fifo_addr;
573 /* for cyclic capability */
574 bool cyclic;
577 struct dma_pl330_dmac {
578 struct pl330_info pif;
580 /* DMA-Engine Device */
581 struct dma_device ddma;
583 /* Holds info about sg limitations */
584 struct device_dma_parameters dma_parms;
586 /* Pool of descriptors available for the DMAC's channels */
587 struct list_head desc_pool;
588 /* To protect desc_pool manipulation */
589 spinlock_t pool_lock;
591 /* Peripheral channels connected to this DMAC */
592 unsigned int num_peripherals;
593 struct dma_pl330_chan *peripherals; /* keep at end */
596 struct dma_pl330_desc {
597 /* To attach to a queue as child */
598 struct list_head node;
600 /* Descriptor for the DMA Engine API */
601 struct dma_async_tx_descriptor txd;
603 /* Xfer for PL330 core */
604 struct pl330_xfer px;
606 struct pl330_reqcfg rqcfg;
607 struct pl330_req req;
609 enum desc_status status;
611 /* The channel which currently holds this desc */
612 struct dma_pl330_chan *pchan;
615 static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
617 if (r && r->xfer_cb)
618 r->xfer_cb(r->token, err);
621 static inline bool _queue_empty(struct pl330_thread *thrd)
623 return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
624 ? true : false;
627 static inline bool _queue_full(struct pl330_thread *thrd)
629 return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
630 ? false : true;
633 static inline bool is_manager(struct pl330_thread *thrd)
635 struct pl330_dmac *pl330 = thrd->dmac;
637 /* MANAGER is indexed at the end */
638 if (thrd->id == pl330->pinfo->pcfg.num_chan)
639 return true;
640 else
641 return false;
644 /* If manager of the thread is in Non-Secure mode */
645 static inline bool _manager_ns(struct pl330_thread *thrd)
647 struct pl330_dmac *pl330 = thrd->dmac;
649 return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
652 static inline u32 get_revision(u32 periph_id)
654 return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
657 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
658 enum pl330_dst da, u16 val)
660 if (dry_run)
661 return SZ_DMAADDH;
663 buf[0] = CMD_DMAADDH;
664 buf[0] |= (da << 1);
665 *((u16 *)&buf[1]) = val;
667 PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
668 da == 1 ? "DA" : "SA", val);
670 return SZ_DMAADDH;
673 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
675 if (dry_run)
676 return SZ_DMAEND;
678 buf[0] = CMD_DMAEND;
680 PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
682 return SZ_DMAEND;
685 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
687 if (dry_run)
688 return SZ_DMAFLUSHP;
690 buf[0] = CMD_DMAFLUSHP;
692 peri &= 0x1f;
693 peri <<= 3;
694 buf[1] = peri;
696 PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
698 return SZ_DMAFLUSHP;
701 static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
703 if (dry_run)
704 return SZ_DMALD;
706 buf[0] = CMD_DMALD;
708 if (cond == SINGLE)
709 buf[0] |= (0 << 1) | (1 << 0);
710 else if (cond == BURST)
711 buf[0] |= (1 << 1) | (1 << 0);
713 PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
714 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
716 return SZ_DMALD;
719 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
720 enum pl330_cond cond, u8 peri)
722 if (dry_run)
723 return SZ_DMALDP;
725 buf[0] = CMD_DMALDP;
727 if (cond == BURST)
728 buf[0] |= (1 << 1);
730 peri &= 0x1f;
731 peri <<= 3;
732 buf[1] = peri;
734 PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
735 cond == SINGLE ? 'S' : 'B', peri >> 3);
737 return SZ_DMALDP;
740 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
741 unsigned loop, u8 cnt)
743 if (dry_run)
744 return SZ_DMALP;
746 buf[0] = CMD_DMALP;
748 if (loop)
749 buf[0] |= (1 << 1);
751 cnt--; /* DMAC increments by 1 internally */
752 buf[1] = cnt;
754 PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
756 return SZ_DMALP;
759 struct _arg_LPEND {
760 enum pl330_cond cond;
761 bool forever;
762 unsigned loop;
763 u8 bjump;
766 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
767 const struct _arg_LPEND *arg)
769 enum pl330_cond cond = arg->cond;
770 bool forever = arg->forever;
771 unsigned loop = arg->loop;
772 u8 bjump = arg->bjump;
774 if (dry_run)
775 return SZ_DMALPEND;
777 buf[0] = CMD_DMALPEND;
779 if (loop)
780 buf[0] |= (1 << 2);
782 if (!forever)
783 buf[0] |= (1 << 4);
785 if (cond == SINGLE)
786 buf[0] |= (0 << 1) | (1 << 0);
787 else if (cond == BURST)
788 buf[0] |= (1 << 1) | (1 << 0);
790 buf[1] = bjump;
792 PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
793 forever ? "FE" : "END",
794 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
795 loop ? '1' : '0',
796 bjump);
798 return SZ_DMALPEND;
801 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
803 if (dry_run)
804 return SZ_DMAKILL;
806 buf[0] = CMD_DMAKILL;
808 return SZ_DMAKILL;
811 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
812 enum dmamov_dst dst, u32 val)
814 if (dry_run)
815 return SZ_DMAMOV;
817 buf[0] = CMD_DMAMOV;
818 buf[1] = dst;
819 *((u32 *)&buf[2]) = val;
821 PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
822 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
824 return SZ_DMAMOV;
827 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
829 if (dry_run)
830 return SZ_DMANOP;
832 buf[0] = CMD_DMANOP;
834 PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
836 return SZ_DMANOP;
839 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
841 if (dry_run)
842 return SZ_DMARMB;
844 buf[0] = CMD_DMARMB;
846 PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
848 return SZ_DMARMB;
851 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
853 if (dry_run)
854 return SZ_DMASEV;
856 buf[0] = CMD_DMASEV;
858 ev &= 0x1f;
859 ev <<= 3;
860 buf[1] = ev;
862 PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
864 return SZ_DMASEV;
867 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
869 if (dry_run)
870 return SZ_DMAST;
872 buf[0] = CMD_DMAST;
874 if (cond == SINGLE)
875 buf[0] |= (0 << 1) | (1 << 0);
876 else if (cond == BURST)
877 buf[0] |= (1 << 1) | (1 << 0);
879 PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
880 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
882 return SZ_DMAST;
885 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
886 enum pl330_cond cond, u8 peri)
888 if (dry_run)
889 return SZ_DMASTP;
891 buf[0] = CMD_DMASTP;
893 if (cond == BURST)
894 buf[0] |= (1 << 1);
896 peri &= 0x1f;
897 peri <<= 3;
898 buf[1] = peri;
900 PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
901 cond == SINGLE ? 'S' : 'B', peri >> 3);
903 return SZ_DMASTP;
906 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
908 if (dry_run)
909 return SZ_DMASTZ;
911 buf[0] = CMD_DMASTZ;
913 PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
915 return SZ_DMASTZ;
918 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
919 unsigned invalidate)
921 if (dry_run)
922 return SZ_DMAWFE;
924 buf[0] = CMD_DMAWFE;
926 ev &= 0x1f;
927 ev <<= 3;
928 buf[1] = ev;
930 if (invalidate)
931 buf[1] |= (1 << 1);
933 PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
934 ev >> 3, invalidate ? ", I" : "");
936 return SZ_DMAWFE;
939 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
940 enum pl330_cond cond, u8 peri)
942 if (dry_run)
943 return SZ_DMAWFP;
945 buf[0] = CMD_DMAWFP;
947 if (cond == SINGLE)
948 buf[0] |= (0 << 1) | (0 << 0);
949 else if (cond == BURST)
950 buf[0] |= (1 << 1) | (0 << 0);
951 else
952 buf[0] |= (0 << 1) | (1 << 0);
954 peri &= 0x1f;
955 peri <<= 3;
956 buf[1] = peri;
958 PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
959 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
961 return SZ_DMAWFP;
964 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
966 if (dry_run)
967 return SZ_DMAWMB;
969 buf[0] = CMD_DMAWMB;
971 PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
973 return SZ_DMAWMB;
976 struct _arg_GO {
977 u8 chan;
978 u32 addr;
979 unsigned ns;
982 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
983 const struct _arg_GO *arg)
985 u8 chan = arg->chan;
986 u32 addr = arg->addr;
987 unsigned ns = arg->ns;
989 if (dry_run)
990 return SZ_DMAGO;
992 buf[0] = CMD_DMAGO;
993 buf[0] |= (ns << 1);
995 buf[1] = chan & 0x7;
997 *((u32 *)&buf[2]) = addr;
999 return SZ_DMAGO;
1002 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
1004 /* Returns Time-Out */
1005 static bool _until_dmac_idle(struct pl330_thread *thrd)
1007 void __iomem *regs = thrd->dmac->pinfo->base;
1008 unsigned long loops = msecs_to_loops(5);
1010 do {
1011 /* Until Manager is Idle */
1012 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
1013 break;
1015 cpu_relax();
1016 } while (--loops);
1018 if (!loops)
1019 return true;
1021 return false;
1024 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
1025 u8 insn[], bool as_manager)
1027 void __iomem *regs = thrd->dmac->pinfo->base;
1028 u32 val;
1030 val = (insn[0] << 16) | (insn[1] << 24);
1031 if (!as_manager) {
1032 val |= (1 << 0);
1033 val |= (thrd->id << 8); /* Channel Number */
1035 writel(val, regs + DBGINST0);
1037 val = *((u32 *)&insn[2]);
1038 writel(val, regs + DBGINST1);
1040 /* If timed out due to halted state-machine */
1041 if (_until_dmac_idle(thrd)) {
1042 dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
1043 return;
1046 /* Get going */
1047 writel(0, regs + DBGCMD);
1051 * Mark a _pl330_req as free.
1052 * We do it by writing DMAEND as the first instruction
1053 * because no valid request is going to have DMAEND as
1054 * its first instruction to execute.
1056 static void mark_free(struct pl330_thread *thrd, int idx)
1058 struct _pl330_req *req = &thrd->req[idx];
1060 _emit_END(0, req->mc_cpu);
1061 req->mc_len = 0;
1063 thrd->req_running = -1;
1066 static inline u32 _state(struct pl330_thread *thrd)
1068 void __iomem *regs = thrd->dmac->pinfo->base;
1069 u32 val;
1071 if (is_manager(thrd))
1072 val = readl(regs + DS) & 0xf;
1073 else
1074 val = readl(regs + CS(thrd->id)) & 0xf;
1076 switch (val) {
1077 case DS_ST_STOP:
1078 return PL330_STATE_STOPPED;
1079 case DS_ST_EXEC:
1080 return PL330_STATE_EXECUTING;
1081 case DS_ST_CMISS:
1082 return PL330_STATE_CACHEMISS;
1083 case DS_ST_UPDTPC:
1084 return PL330_STATE_UPDTPC;
1085 case DS_ST_WFE:
1086 return PL330_STATE_WFE;
1087 case DS_ST_FAULT:
1088 return PL330_STATE_FAULTING;
1089 case DS_ST_ATBRR:
1090 if (is_manager(thrd))
1091 return PL330_STATE_INVALID;
1092 else
1093 return PL330_STATE_ATBARRIER;
1094 case DS_ST_QBUSY:
1095 if (is_manager(thrd))
1096 return PL330_STATE_INVALID;
1097 else
1098 return PL330_STATE_QUEUEBUSY;
1099 case DS_ST_WFP:
1100 if (is_manager(thrd))
1101 return PL330_STATE_INVALID;
1102 else
1103 return PL330_STATE_WFP;
1104 case DS_ST_KILL:
1105 if (is_manager(thrd))
1106 return PL330_STATE_INVALID;
1107 else
1108 return PL330_STATE_KILLING;
1109 case DS_ST_CMPLT:
1110 if (is_manager(thrd))
1111 return PL330_STATE_INVALID;
1112 else
1113 return PL330_STATE_COMPLETING;
1114 case DS_ST_FLTCMP:
1115 if (is_manager(thrd))
1116 return PL330_STATE_INVALID;
1117 else
1118 return PL330_STATE_FAULT_COMPLETING;
1119 default:
1120 return PL330_STATE_INVALID;
1124 static void _stop(struct pl330_thread *thrd)
1126 void __iomem *regs = thrd->dmac->pinfo->base;
1127 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1129 if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1130 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1132 /* Return if nothing needs to be done */
1133 if (_state(thrd) == PL330_STATE_COMPLETING
1134 || _state(thrd) == PL330_STATE_KILLING
1135 || _state(thrd) == PL330_STATE_STOPPED)
1136 return;
1138 _emit_KILL(0, insn);
1140 /* Stop generating interrupts for SEV */
1141 writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1143 _execute_DBGINSN(thrd, insn, is_manager(thrd));
1146 /* Start doing req 'idx' of thread 'thrd' */
1147 static bool _trigger(struct pl330_thread *thrd)
1149 void __iomem *regs = thrd->dmac->pinfo->base;
1150 struct _pl330_req *req;
1151 struct pl330_req *r;
1152 struct _arg_GO go;
1153 unsigned ns;
1154 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1155 int idx;
1157 /* Return if already ACTIVE */
1158 if (_state(thrd) != PL330_STATE_STOPPED)
1159 return true;
1161 idx = 1 - thrd->lstenq;
1162 if (!IS_FREE(&thrd->req[idx]))
1163 req = &thrd->req[idx];
1164 else {
1165 idx = thrd->lstenq;
1166 if (!IS_FREE(&thrd->req[idx]))
1167 req = &thrd->req[idx];
1168 else
1169 req = NULL;
1172 /* Return if no request */
1173 if (!req || !req->r)
1174 return true;
1176 r = req->r;
1178 if (r->cfg)
1179 ns = r->cfg->nonsecure ? 1 : 0;
1180 else if (readl(regs + CS(thrd->id)) & CS_CNS)
1181 ns = 1;
1182 else
1183 ns = 0;
1185 /* See 'Abort Sources' point-4 at Page 2-25 */
1186 if (_manager_ns(thrd) && !ns)
1187 dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
1188 __func__, __LINE__);
1190 go.chan = thrd->id;
1191 go.addr = req->mc_bus;
1192 go.ns = ns;
1193 _emit_GO(0, insn, &go);
1195 /* Set to generate interrupts for SEV */
1196 writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1198 /* Only manager can execute GO */
1199 _execute_DBGINSN(thrd, insn, true);
1201 thrd->req_running = idx;
1203 return true;
1206 static bool _start(struct pl330_thread *thrd)
1208 switch (_state(thrd)) {
1209 case PL330_STATE_FAULT_COMPLETING:
1210 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1212 if (_state(thrd) == PL330_STATE_KILLING)
1213 UNTIL(thrd, PL330_STATE_STOPPED)
1215 case PL330_STATE_FAULTING:
1216 _stop(thrd);
1218 case PL330_STATE_KILLING:
1219 case PL330_STATE_COMPLETING:
1220 UNTIL(thrd, PL330_STATE_STOPPED)
1222 case PL330_STATE_STOPPED:
1223 return _trigger(thrd);
1225 case PL330_STATE_WFP:
1226 case PL330_STATE_QUEUEBUSY:
1227 case PL330_STATE_ATBARRIER:
1228 case PL330_STATE_UPDTPC:
1229 case PL330_STATE_CACHEMISS:
1230 case PL330_STATE_EXECUTING:
1231 return true;
1233 case PL330_STATE_WFE: /* For RESUME, nothing yet */
1234 default:
1235 return false;
1239 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1240 const struct _xfer_spec *pxs, int cyc)
1242 int off = 0;
1243 struct pl330_config *pcfg = pxs->r->cfg->pcfg;
1245 /* check lock-up free version */
1246 if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1247 while (cyc--) {
1248 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1249 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1251 } else {
1252 while (cyc--) {
1253 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1254 off += _emit_RMB(dry_run, &buf[off]);
1255 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1256 off += _emit_WMB(dry_run, &buf[off]);
1260 return off;
1263 static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
1264 const struct _xfer_spec *pxs, int cyc)
1266 int off = 0;
1268 while (cyc--) {
1269 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1270 off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1271 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1272 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1275 return off;
1278 static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
1279 const struct _xfer_spec *pxs, int cyc)
1281 int off = 0;
1283 while (cyc--) {
1284 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1285 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1286 off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1287 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1290 return off;
1293 static int _bursts(unsigned dry_run, u8 buf[],
1294 const struct _xfer_spec *pxs, int cyc)
1296 int off = 0;
1298 switch (pxs->r->rqtype) {
1299 case MEMTODEV:
1300 off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
1301 break;
1302 case DEVTOMEM:
1303 off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
1304 break;
1305 case MEMTOMEM:
1306 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1307 break;
1308 default:
1309 off += 0x40000000; /* Scare off the Client */
1310 break;
1313 return off;
1316 /* Returns bytes consumed and updates bursts */
1317 static inline int _loop(unsigned dry_run, u8 buf[],
1318 unsigned long *bursts, const struct _xfer_spec *pxs)
1320 int cyc, cycmax, szlp, szlpend, szbrst, off;
1321 unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1322 struct _arg_LPEND lpend;
1324 /* Max iterations possible in DMALP is 256 */
1325 if (*bursts >= 256*256) {
1326 lcnt1 = 256;
1327 lcnt0 = 256;
1328 cyc = *bursts / lcnt1 / lcnt0;
1329 } else if (*bursts > 256) {
1330 lcnt1 = 256;
1331 lcnt0 = *bursts / lcnt1;
1332 cyc = 1;
1333 } else {
1334 lcnt1 = *bursts;
1335 lcnt0 = 0;
1336 cyc = 1;
1339 szlp = _emit_LP(1, buf, 0, 0);
1340 szbrst = _bursts(1, buf, pxs, 1);
1342 lpend.cond = ALWAYS;
1343 lpend.forever = false;
1344 lpend.loop = 0;
1345 lpend.bjump = 0;
1346 szlpend = _emit_LPEND(1, buf, &lpend);
1348 if (lcnt0) {
1349 szlp *= 2;
1350 szlpend *= 2;
1354 * Max bursts that we can unroll due to limit on the
1355 * size of backward jump that can be encoded in DMALPEND
1356 * which is 8-bits and hence 255
1358 cycmax = (255 - (szlp + szlpend)) / szbrst;
1360 cyc = (cycmax < cyc) ? cycmax : cyc;
1362 off = 0;
1364 if (lcnt0) {
1365 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1366 ljmp0 = off;
1369 off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1370 ljmp1 = off;
1372 off += _bursts(dry_run, &buf[off], pxs, cyc);
1374 lpend.cond = ALWAYS;
1375 lpend.forever = false;
1376 lpend.loop = 1;
1377 lpend.bjump = off - ljmp1;
1378 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1380 if (lcnt0) {
1381 lpend.cond = ALWAYS;
1382 lpend.forever = false;
1383 lpend.loop = 0;
1384 lpend.bjump = off - ljmp0;
1385 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1388 *bursts = lcnt1 * cyc;
1389 if (lcnt0)
1390 *bursts *= lcnt0;
1392 return off;
1395 static inline int _setup_loops(unsigned dry_run, u8 buf[],
1396 const struct _xfer_spec *pxs)
1398 struct pl330_xfer *x = pxs->x;
1399 u32 ccr = pxs->ccr;
1400 unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1401 int off = 0;
1403 while (bursts) {
1404 c = bursts;
1405 off += _loop(dry_run, &buf[off], &c, pxs);
1406 bursts -= c;
1409 return off;
1412 static inline int _setup_xfer(unsigned dry_run, u8 buf[],
1413 const struct _xfer_spec *pxs)
1415 struct pl330_xfer *x = pxs->x;
1416 int off = 0;
1418 /* DMAMOV SAR, x->src_addr */
1419 off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1420 /* DMAMOV DAR, x->dst_addr */
1421 off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1423 /* Setup Loop(s) */
1424 off += _setup_loops(dry_run, &buf[off], pxs);
1426 return off;
1430 * A req is a sequence of one or more xfer units.
1431 * Returns the number of bytes taken to setup the MC for the req.
1433 static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
1434 unsigned index, struct _xfer_spec *pxs)
1436 struct _pl330_req *req = &thrd->req[index];
1437 struct pl330_xfer *x;
1438 u8 *buf = req->mc_cpu;
1439 int off = 0;
1441 PL330_DBGMC_START(req->mc_bus);
1443 /* DMAMOV CCR, ccr */
1444 off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1446 x = pxs->r->x;
1447 do {
1448 /* Error if xfer length is not aligned at burst size */
1449 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1450 return -EINVAL;
1452 pxs->x = x;
1453 off += _setup_xfer(dry_run, &buf[off], pxs);
1455 x = x->next;
1456 } while (x);
1458 /* DMASEV peripheral/event */
1459 off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1460 /* DMAEND */
1461 off += _emit_END(dry_run, &buf[off]);
1463 return off;
1466 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1468 u32 ccr = 0;
1470 if (rqc->src_inc)
1471 ccr |= CC_SRCINC;
1473 if (rqc->dst_inc)
1474 ccr |= CC_DSTINC;
1476 /* We set same protection levels for Src and DST for now */
1477 if (rqc->privileged)
1478 ccr |= CC_SRCPRI | CC_DSTPRI;
1479 if (rqc->nonsecure)
1480 ccr |= CC_SRCNS | CC_DSTNS;
1481 if (rqc->insnaccess)
1482 ccr |= CC_SRCIA | CC_DSTIA;
1484 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1485 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1487 ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1488 ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1490 ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1491 ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1493 ccr |= (rqc->swap << CC_SWAP_SHFT);
1495 return ccr;
1498 static inline bool _is_valid(u32 ccr)
1500 enum pl330_dstcachectrl dcctl;
1501 enum pl330_srccachectrl scctl;
1503 dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
1504 scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
1506 if (dcctl == DINVALID1 || dcctl == DINVALID2
1507 || scctl == SINVALID1 || scctl == SINVALID2)
1508 return false;
1509 else
1510 return true;
1514 * Submit a list of xfers after which the client wants notification.
1515 * Client is not notified after each xfer unit, just once after all
1516 * xfer units are done or some error occurs.
1518 static int pl330_submit_req(void *ch_id, struct pl330_req *r)
1520 struct pl330_thread *thrd = ch_id;
1521 struct pl330_dmac *pl330;
1522 struct pl330_info *pi;
1523 struct _xfer_spec xs;
1524 unsigned long flags;
1525 void __iomem *regs;
1526 unsigned idx;
1527 u32 ccr;
1528 int ret = 0;
1530 /* No Req or Unacquired Channel or DMAC */
1531 if (!r || !thrd || thrd->free)
1532 return -EINVAL;
1534 pl330 = thrd->dmac;
1535 pi = pl330->pinfo;
1536 regs = pi->base;
1538 if (pl330->state == DYING
1539 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1540 dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
1541 __func__, __LINE__);
1542 return -EAGAIN;
1545 /* If request for non-existing peripheral */
1546 if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
1547 dev_info(thrd->dmac->pinfo->dev,
1548 "%s:%d Invalid peripheral(%u)!\n",
1549 __func__, __LINE__, r->peri);
1550 return -EINVAL;
1553 spin_lock_irqsave(&pl330->lock, flags);
1555 if (_queue_full(thrd)) {
1556 ret = -EAGAIN;
1557 goto xfer_exit;
1561 /* Use last settings, if not provided */
1562 if (r->cfg) {
1563 /* Prefer Secure Channel */
1564 if (!_manager_ns(thrd))
1565 r->cfg->nonsecure = 0;
1566 else
1567 r->cfg->nonsecure = 1;
1569 ccr = _prepare_ccr(r->cfg);
1570 } else {
1571 ccr = readl(regs + CC(thrd->id));
1574 /* If this req doesn't have valid xfer settings */
1575 if (!_is_valid(ccr)) {
1576 ret = -EINVAL;
1577 dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
1578 __func__, __LINE__, ccr);
1579 goto xfer_exit;
1582 idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
1584 xs.ccr = ccr;
1585 xs.r = r;
1587 /* First dry run to check if req is acceptable */
1588 ret = _setup_req(1, thrd, idx, &xs);
1589 if (ret < 0)
1590 goto xfer_exit;
1592 if (ret > pi->mcbufsz / 2) {
1593 dev_info(thrd->dmac->pinfo->dev,
1594 "%s:%d Trying increasing mcbufsz\n",
1595 __func__, __LINE__);
1596 ret = -ENOMEM;
1597 goto xfer_exit;
1600 /* Hook the request */
1601 thrd->lstenq = idx;
1602 thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
1603 thrd->req[idx].r = r;
1605 ret = 0;
1607 xfer_exit:
1608 spin_unlock_irqrestore(&pl330->lock, flags);
1610 return ret;
1613 static void pl330_dotask(unsigned long data)
1615 struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1616 struct pl330_info *pi = pl330->pinfo;
1617 unsigned long flags;
1618 int i;
1620 spin_lock_irqsave(&pl330->lock, flags);
1622 /* The DMAC itself gone nuts */
1623 if (pl330->dmac_tbd.reset_dmac) {
1624 pl330->state = DYING;
1625 /* Reset the manager too */
1626 pl330->dmac_tbd.reset_mngr = true;
1627 /* Clear the reset flag */
1628 pl330->dmac_tbd.reset_dmac = false;
1631 if (pl330->dmac_tbd.reset_mngr) {
1632 _stop(pl330->manager);
1633 /* Reset all channels */
1634 pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
1635 /* Clear the reset flag */
1636 pl330->dmac_tbd.reset_mngr = false;
1639 for (i = 0; i < pi->pcfg.num_chan; i++) {
1641 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1642 struct pl330_thread *thrd = &pl330->channels[i];
1643 void __iomem *regs = pi->base;
1644 enum pl330_op_err err;
1646 _stop(thrd);
1648 if (readl(regs + FSC) & (1 << thrd->id))
1649 err = PL330_ERR_FAIL;
1650 else
1651 err = PL330_ERR_ABORT;
1653 spin_unlock_irqrestore(&pl330->lock, flags);
1655 _callback(thrd->req[1 - thrd->lstenq].r, err);
1656 _callback(thrd->req[thrd->lstenq].r, err);
1658 spin_lock_irqsave(&pl330->lock, flags);
1660 thrd->req[0].r = NULL;
1661 thrd->req[1].r = NULL;
1662 mark_free(thrd, 0);
1663 mark_free(thrd, 1);
1665 /* Clear the reset flag */
1666 pl330->dmac_tbd.reset_chan &= ~(1 << i);
1670 spin_unlock_irqrestore(&pl330->lock, flags);
1672 return;
1675 /* Returns 1 if state was updated, 0 otherwise */
1676 static int pl330_update(const struct pl330_info *pi)
1678 struct pl330_req *rqdone, *tmp;
1679 struct pl330_dmac *pl330;
1680 unsigned long flags;
1681 void __iomem *regs;
1682 u32 val;
1683 int id, ev, ret = 0;
1685 if (!pi || !pi->pl330_data)
1686 return 0;
1688 regs = pi->base;
1689 pl330 = pi->pl330_data;
1691 spin_lock_irqsave(&pl330->lock, flags);
1693 val = readl(regs + FSM) & 0x1;
1694 if (val)
1695 pl330->dmac_tbd.reset_mngr = true;
1696 else
1697 pl330->dmac_tbd.reset_mngr = false;
1699 val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
1700 pl330->dmac_tbd.reset_chan |= val;
1701 if (val) {
1702 int i = 0;
1703 while (i < pi->pcfg.num_chan) {
1704 if (val & (1 << i)) {
1705 dev_info(pi->dev,
1706 "Reset Channel-%d\t CS-%x FTC-%x\n",
1707 i, readl(regs + CS(i)),
1708 readl(regs + FTC(i)));
1709 _stop(&pl330->channels[i]);
1711 i++;
1715 /* Check which event happened i.e, thread notified */
1716 val = readl(regs + ES);
1717 if (pi->pcfg.num_events < 32
1718 && val & ~((1 << pi->pcfg.num_events) - 1)) {
1719 pl330->dmac_tbd.reset_dmac = true;
1720 dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
1721 ret = 1;
1722 goto updt_exit;
1725 for (ev = 0; ev < pi->pcfg.num_events; ev++) {
1726 if (val & (1 << ev)) { /* Event occurred */
1727 struct pl330_thread *thrd;
1728 u32 inten = readl(regs + INTEN);
1729 int active;
1731 /* Clear the event */
1732 if (inten & (1 << ev))
1733 writel(1 << ev, regs + INTCLR);
1735 ret = 1;
1737 id = pl330->events[ev];
1739 thrd = &pl330->channels[id];
1741 active = thrd->req_running;
1742 if (active == -1) /* Aborted */
1743 continue;
1745 /* Detach the req */
1746 rqdone = thrd->req[active].r;
1747 thrd->req[active].r = NULL;
1749 mark_free(thrd, active);
1751 /* Get going again ASAP */
1752 _start(thrd);
1754 /* For now, just make a list of callbacks to be done */
1755 list_add_tail(&rqdone->rqd, &pl330->req_done);
1759 /* Now that we are in no hurry, do the callbacks */
1760 list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
1761 list_del(&rqdone->rqd);
1763 spin_unlock_irqrestore(&pl330->lock, flags);
1764 _callback(rqdone, PL330_ERR_NONE);
1765 spin_lock_irqsave(&pl330->lock, flags);
1768 updt_exit:
1769 spin_unlock_irqrestore(&pl330->lock, flags);
1771 if (pl330->dmac_tbd.reset_dmac
1772 || pl330->dmac_tbd.reset_mngr
1773 || pl330->dmac_tbd.reset_chan) {
1774 ret = 1;
1775 tasklet_schedule(&pl330->tasks);
1778 return ret;
1781 static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
1783 struct pl330_thread *thrd = ch_id;
1784 struct pl330_dmac *pl330;
1785 unsigned long flags;
1786 int ret = 0, active;
1788 if (!thrd || thrd->free || thrd->dmac->state == DYING)
1789 return -EINVAL;
1791 pl330 = thrd->dmac;
1792 active = thrd->req_running;
1794 spin_lock_irqsave(&pl330->lock, flags);
1796 switch (op) {
1797 case PL330_OP_FLUSH:
1798 /* Make sure the channel is stopped */
1799 _stop(thrd);
1801 thrd->req[0].r = NULL;
1802 thrd->req[1].r = NULL;
1803 mark_free(thrd, 0);
1804 mark_free(thrd, 1);
1805 break;
1807 case PL330_OP_ABORT:
1808 /* Make sure the channel is stopped */
1809 _stop(thrd);
1811 /* ABORT is only for the active req */
1812 if (active == -1)
1813 break;
1815 thrd->req[active].r = NULL;
1816 mark_free(thrd, active);
1818 /* Start the next */
1819 case PL330_OP_START:
1820 if ((active == -1) && !_start(thrd))
1821 ret = -EIO;
1822 break;
1824 default:
1825 ret = -EINVAL;
1828 spin_unlock_irqrestore(&pl330->lock, flags);
1829 return ret;
1832 /* Reserve an event */
1833 static inline int _alloc_event(struct pl330_thread *thrd)
1835 struct pl330_dmac *pl330 = thrd->dmac;
1836 struct pl330_info *pi = pl330->pinfo;
1837 int ev;
1839 for (ev = 0; ev < pi->pcfg.num_events; ev++)
1840 if (pl330->events[ev] == -1) {
1841 pl330->events[ev] = thrd->id;
1842 return ev;
1845 return -1;
1848 static bool _chan_ns(const struct pl330_info *pi, int i)
1850 return pi->pcfg.irq_ns & (1 << i);
1853 /* Upon success, returns IdentityToken for the
1854 * allocated channel, NULL otherwise.
1856 static void *pl330_request_channel(const struct pl330_info *pi)
1858 struct pl330_thread *thrd = NULL;
1859 struct pl330_dmac *pl330;
1860 unsigned long flags;
1861 int chans, i;
1863 if (!pi || !pi->pl330_data)
1864 return NULL;
1866 pl330 = pi->pl330_data;
1868 if (pl330->state == DYING)
1869 return NULL;
1871 chans = pi->pcfg.num_chan;
1873 spin_lock_irqsave(&pl330->lock, flags);
1875 for (i = 0; i < chans; i++) {
1876 thrd = &pl330->channels[i];
1877 if ((thrd->free) && (!_manager_ns(thrd) ||
1878 _chan_ns(pi, i))) {
1879 thrd->ev = _alloc_event(thrd);
1880 if (thrd->ev >= 0) {
1881 thrd->free = false;
1882 thrd->lstenq = 1;
1883 thrd->req[0].r = NULL;
1884 mark_free(thrd, 0);
1885 thrd->req[1].r = NULL;
1886 mark_free(thrd, 1);
1887 break;
1890 thrd = NULL;
1893 spin_unlock_irqrestore(&pl330->lock, flags);
1895 return thrd;
1898 /* Release an event */
1899 static inline void _free_event(struct pl330_thread *thrd, int ev)
1901 struct pl330_dmac *pl330 = thrd->dmac;
1902 struct pl330_info *pi = pl330->pinfo;
1904 /* If the event is valid and was held by the thread */
1905 if (ev >= 0 && ev < pi->pcfg.num_events
1906 && pl330->events[ev] == thrd->id)
1907 pl330->events[ev] = -1;
1910 static void pl330_release_channel(void *ch_id)
1912 struct pl330_thread *thrd = ch_id;
1913 struct pl330_dmac *pl330;
1914 unsigned long flags;
1916 if (!thrd || thrd->free)
1917 return;
1919 _stop(thrd);
1921 _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
1922 _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
1924 pl330 = thrd->dmac;
1926 spin_lock_irqsave(&pl330->lock, flags);
1927 _free_event(thrd, thrd->ev);
1928 thrd->free = true;
1929 spin_unlock_irqrestore(&pl330->lock, flags);
1932 /* Initialize the structure for PL330 configuration, that can be used
1933 * by the client driver the make best use of the DMAC
1935 static void read_dmac_config(struct pl330_info *pi)
1937 void __iomem *regs = pi->base;
1938 u32 val;
1940 val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1941 val &= CRD_DATA_WIDTH_MASK;
1942 pi->pcfg.data_bus_width = 8 * (1 << val);
1944 val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1945 val &= CRD_DATA_BUFF_MASK;
1946 pi->pcfg.data_buf_dep = val + 1;
1948 val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1949 val &= CR0_NUM_CHANS_MASK;
1950 val += 1;
1951 pi->pcfg.num_chan = val;
1953 val = readl(regs + CR0);
1954 if (val & CR0_PERIPH_REQ_SET) {
1955 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1956 val += 1;
1957 pi->pcfg.num_peri = val;
1958 pi->pcfg.peri_ns = readl(regs + CR4);
1959 } else {
1960 pi->pcfg.num_peri = 0;
1963 val = readl(regs + CR0);
1964 if (val & CR0_BOOT_MAN_NS)
1965 pi->pcfg.mode |= DMAC_MODE_NS;
1966 else
1967 pi->pcfg.mode &= ~DMAC_MODE_NS;
1969 val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1970 val &= CR0_NUM_EVENTS_MASK;
1971 val += 1;
1972 pi->pcfg.num_events = val;
1974 pi->pcfg.irq_ns = readl(regs + CR3);
1977 static inline void _reset_thread(struct pl330_thread *thrd)
1979 struct pl330_dmac *pl330 = thrd->dmac;
1980 struct pl330_info *pi = pl330->pinfo;
1982 thrd->req[0].mc_cpu = pl330->mcode_cpu
1983 + (thrd->id * pi->mcbufsz);
1984 thrd->req[0].mc_bus = pl330->mcode_bus
1985 + (thrd->id * pi->mcbufsz);
1986 thrd->req[0].r = NULL;
1987 mark_free(thrd, 0);
1989 thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1990 + pi->mcbufsz / 2;
1991 thrd->req[1].mc_bus = thrd->req[0].mc_bus
1992 + pi->mcbufsz / 2;
1993 thrd->req[1].r = NULL;
1994 mark_free(thrd, 1);
1997 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1999 struct pl330_info *pi = pl330->pinfo;
2000 int chans = pi->pcfg.num_chan;
2001 struct pl330_thread *thrd;
2002 int i;
2004 /* Allocate 1 Manager and 'chans' Channel threads */
2005 pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
2006 GFP_KERNEL);
2007 if (!pl330->channels)
2008 return -ENOMEM;
2010 /* Init Channel threads */
2011 for (i = 0; i < chans; i++) {
2012 thrd = &pl330->channels[i];
2013 thrd->id = i;
2014 thrd->dmac = pl330;
2015 _reset_thread(thrd);
2016 thrd->free = true;
2019 /* MANAGER is indexed at the end */
2020 thrd = &pl330->channels[chans];
2021 thrd->id = chans;
2022 thrd->dmac = pl330;
2023 thrd->free = false;
2024 pl330->manager = thrd;
2026 return 0;
2029 static int dmac_alloc_resources(struct pl330_dmac *pl330)
2031 struct pl330_info *pi = pl330->pinfo;
2032 int chans = pi->pcfg.num_chan;
2033 int ret;
2036 * Alloc MicroCode buffer for 'chans' Channel threads.
2037 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
2039 pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
2040 chans * pi->mcbufsz,
2041 &pl330->mcode_bus, GFP_KERNEL);
2042 if (!pl330->mcode_cpu) {
2043 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2044 __func__, __LINE__);
2045 return -ENOMEM;
2048 ret = dmac_alloc_threads(pl330);
2049 if (ret) {
2050 dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
2051 __func__, __LINE__);
2052 dma_free_coherent(pi->dev,
2053 chans * pi->mcbufsz,
2054 pl330->mcode_cpu, pl330->mcode_bus);
2055 return ret;
2058 return 0;
2061 static int pl330_add(struct pl330_info *pi)
2063 struct pl330_dmac *pl330;
2064 void __iomem *regs;
2065 int i, ret;
2067 if (!pi || !pi->dev)
2068 return -EINVAL;
2070 /* If already added */
2071 if (pi->pl330_data)
2072 return -EINVAL;
2075 * If the SoC can perform reset on the DMAC, then do it
2076 * before reading its configuration.
2078 if (pi->dmac_reset)
2079 pi->dmac_reset(pi);
2081 regs = pi->base;
2083 /* Check if we can handle this DMAC */
2084 if ((pi->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
2085 dev_err(pi->dev, "PERIPH_ID 0x%x !\n", pi->pcfg.periph_id);
2086 return -EINVAL;
2089 /* Read the configuration of the DMAC */
2090 read_dmac_config(pi);
2092 if (pi->pcfg.num_events == 0) {
2093 dev_err(pi->dev, "%s:%d Can't work without events!\n",
2094 __func__, __LINE__);
2095 return -EINVAL;
2098 pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
2099 if (!pl330) {
2100 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2101 __func__, __LINE__);
2102 return -ENOMEM;
2105 /* Assign the info structure and private data */
2106 pl330->pinfo = pi;
2107 pi->pl330_data = pl330;
2109 spin_lock_init(&pl330->lock);
2111 INIT_LIST_HEAD(&pl330->req_done);
2113 /* Use default MC buffer size if not provided */
2114 if (!pi->mcbufsz)
2115 pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
2117 /* Mark all events as free */
2118 for (i = 0; i < pi->pcfg.num_events; i++)
2119 pl330->events[i] = -1;
2121 /* Allocate resources needed by the DMAC */
2122 ret = dmac_alloc_resources(pl330);
2123 if (ret) {
2124 dev_err(pi->dev, "Unable to create channels for DMAC\n");
2125 kfree(pl330);
2126 return ret;
2129 tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
2131 pl330->state = INIT;
2133 return 0;
2136 static int dmac_free_threads(struct pl330_dmac *pl330)
2138 struct pl330_info *pi = pl330->pinfo;
2139 int chans = pi->pcfg.num_chan;
2140 struct pl330_thread *thrd;
2141 int i;
2143 /* Release Channel threads */
2144 for (i = 0; i < chans; i++) {
2145 thrd = &pl330->channels[i];
2146 pl330_release_channel((void *)thrd);
2149 /* Free memory */
2150 kfree(pl330->channels);
2152 return 0;
2155 static void dmac_free_resources(struct pl330_dmac *pl330)
2157 struct pl330_info *pi = pl330->pinfo;
2158 int chans = pi->pcfg.num_chan;
2160 dmac_free_threads(pl330);
2162 dma_free_coherent(pi->dev, chans * pi->mcbufsz,
2163 pl330->mcode_cpu, pl330->mcode_bus);
2166 static void pl330_del(struct pl330_info *pi)
2168 struct pl330_dmac *pl330;
2170 if (!pi || !pi->pl330_data)
2171 return;
2173 pl330 = pi->pl330_data;
2175 pl330->state = UNINIT;
2177 tasklet_kill(&pl330->tasks);
2179 /* Free DMAC resources */
2180 dmac_free_resources(pl330);
2182 kfree(pl330);
2183 pi->pl330_data = NULL;
2186 /* forward declaration */
2187 static struct amba_driver pl330_driver;
2189 static inline struct dma_pl330_chan *
2190 to_pchan(struct dma_chan *ch)
2192 if (!ch)
2193 return NULL;
2195 return container_of(ch, struct dma_pl330_chan, chan);
2198 static inline struct dma_pl330_desc *
2199 to_desc(struct dma_async_tx_descriptor *tx)
2201 return container_of(tx, struct dma_pl330_desc, txd);
2204 static inline void fill_queue(struct dma_pl330_chan *pch)
2206 struct dma_pl330_desc *desc;
2207 int ret;
2209 list_for_each_entry(desc, &pch->work_list, node) {
2211 /* If already submitted */
2212 if (desc->status == BUSY)
2213 continue;
2215 ret = pl330_submit_req(pch->pl330_chid,
2216 &desc->req);
2217 if (!ret) {
2218 desc->status = BUSY;
2219 } else if (ret == -EAGAIN) {
2220 /* QFull or DMAC Dying */
2221 break;
2222 } else {
2223 /* Unacceptable request */
2224 desc->status = DONE;
2225 dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n",
2226 __func__, __LINE__, desc->txd.cookie);
2227 tasklet_schedule(&pch->task);
2232 static void pl330_tasklet(unsigned long data)
2234 struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2235 struct dma_pl330_desc *desc, *_dt;
2236 unsigned long flags;
2238 spin_lock_irqsave(&pch->lock, flags);
2240 /* Pick up ripe tomatoes */
2241 list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2242 if (desc->status == DONE) {
2243 if (!pch->cyclic)
2244 dma_cookie_complete(&desc->txd);
2245 list_move_tail(&desc->node, &pch->completed_list);
2248 /* Try to submit a req imm. next to the last completed cookie */
2249 fill_queue(pch);
2251 /* Make sure the PL330 Channel thread is active */
2252 pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START);
2254 while (!list_empty(&pch->completed_list)) {
2255 dma_async_tx_callback callback;
2256 void *callback_param;
2258 desc = list_first_entry(&pch->completed_list,
2259 struct dma_pl330_desc, node);
2261 callback = desc->txd.callback;
2262 callback_param = desc->txd.callback_param;
2264 if (pch->cyclic) {
2265 desc->status = PREP;
2266 list_move_tail(&desc->node, &pch->work_list);
2267 } else {
2268 desc->status = FREE;
2269 list_move_tail(&desc->node, &pch->dmac->desc_pool);
2272 dma_descriptor_unmap(&desc->txd);
2274 if (callback) {
2275 spin_unlock_irqrestore(&pch->lock, flags);
2276 callback(callback_param);
2277 spin_lock_irqsave(&pch->lock, flags);
2280 spin_unlock_irqrestore(&pch->lock, flags);
2283 static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
2285 struct dma_pl330_desc *desc = token;
2286 struct dma_pl330_chan *pch = desc->pchan;
2287 unsigned long flags;
2289 /* If desc aborted */
2290 if (!pch)
2291 return;
2293 spin_lock_irqsave(&pch->lock, flags);
2295 desc->status = DONE;
2297 spin_unlock_irqrestore(&pch->lock, flags);
2299 tasklet_schedule(&pch->task);
2302 bool pl330_filter(struct dma_chan *chan, void *param)
2304 u8 *peri_id;
2306 if (chan->device->dev->driver != &pl330_driver.drv)
2307 return false;
2309 peri_id = chan->private;
2310 return *peri_id == (unsigned long)param;
2312 EXPORT_SYMBOL(pl330_filter);
2314 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2315 struct of_dma *ofdma)
2317 int count = dma_spec->args_count;
2318 struct dma_pl330_dmac *pdmac = ofdma->of_dma_data;
2319 unsigned int chan_id;
2321 if (count != 1)
2322 return NULL;
2324 chan_id = dma_spec->args[0];
2325 if (chan_id >= pdmac->num_peripherals)
2326 return NULL;
2328 return dma_get_slave_channel(&pdmac->peripherals[chan_id].chan);
2331 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2333 struct dma_pl330_chan *pch = to_pchan(chan);
2334 struct dma_pl330_dmac *pdmac = pch->dmac;
2335 unsigned long flags;
2337 spin_lock_irqsave(&pch->lock, flags);
2339 dma_cookie_init(chan);
2340 pch->cyclic = false;
2342 pch->pl330_chid = pl330_request_channel(&pdmac->pif);
2343 if (!pch->pl330_chid) {
2344 spin_unlock_irqrestore(&pch->lock, flags);
2345 return -ENOMEM;
2348 tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2350 spin_unlock_irqrestore(&pch->lock, flags);
2352 return 1;
2355 static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
2357 struct dma_pl330_chan *pch = to_pchan(chan);
2358 struct dma_pl330_desc *desc;
2359 unsigned long flags;
2360 struct dma_pl330_dmac *pdmac = pch->dmac;
2361 struct dma_slave_config *slave_config;
2362 LIST_HEAD(list);
2364 switch (cmd) {
2365 case DMA_TERMINATE_ALL:
2366 spin_lock_irqsave(&pch->lock, flags);
2368 /* FLUSH the PL330 Channel thread */
2369 pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
2371 /* Mark all desc done */
2372 list_for_each_entry(desc, &pch->submitted_list, node) {
2373 desc->status = FREE;
2374 dma_cookie_complete(&desc->txd);
2377 list_for_each_entry(desc, &pch->work_list , node) {
2378 desc->status = FREE;
2379 dma_cookie_complete(&desc->txd);
2382 list_for_each_entry(desc, &pch->completed_list , node) {
2383 desc->status = FREE;
2384 dma_cookie_complete(&desc->txd);
2387 list_splice_tail_init(&pch->submitted_list, &pdmac->desc_pool);
2388 list_splice_tail_init(&pch->work_list, &pdmac->desc_pool);
2389 list_splice_tail_init(&pch->completed_list, &pdmac->desc_pool);
2390 spin_unlock_irqrestore(&pch->lock, flags);
2391 break;
2392 case DMA_SLAVE_CONFIG:
2393 slave_config = (struct dma_slave_config *)arg;
2395 if (slave_config->direction == DMA_MEM_TO_DEV) {
2396 if (slave_config->dst_addr)
2397 pch->fifo_addr = slave_config->dst_addr;
2398 if (slave_config->dst_addr_width)
2399 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2400 if (slave_config->dst_maxburst)
2401 pch->burst_len = slave_config->dst_maxburst;
2402 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2403 if (slave_config->src_addr)
2404 pch->fifo_addr = slave_config->src_addr;
2405 if (slave_config->src_addr_width)
2406 pch->burst_sz = __ffs(slave_config->src_addr_width);
2407 if (slave_config->src_maxburst)
2408 pch->burst_len = slave_config->src_maxburst;
2410 break;
2411 default:
2412 dev_err(pch->dmac->pif.dev, "Not supported command.\n");
2413 return -ENXIO;
2416 return 0;
2419 static void pl330_free_chan_resources(struct dma_chan *chan)
2421 struct dma_pl330_chan *pch = to_pchan(chan);
2422 unsigned long flags;
2424 tasklet_kill(&pch->task);
2426 spin_lock_irqsave(&pch->lock, flags);
2428 pl330_release_channel(pch->pl330_chid);
2429 pch->pl330_chid = NULL;
2431 if (pch->cyclic)
2432 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2434 spin_unlock_irqrestore(&pch->lock, flags);
2437 static enum dma_status
2438 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2439 struct dma_tx_state *txstate)
2441 return dma_cookie_status(chan, cookie, txstate);
2444 static void pl330_issue_pending(struct dma_chan *chan)
2446 struct dma_pl330_chan *pch = to_pchan(chan);
2447 unsigned long flags;
2449 spin_lock_irqsave(&pch->lock, flags);
2450 list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2451 spin_unlock_irqrestore(&pch->lock, flags);
2453 pl330_tasklet((unsigned long)pch);
2457 * We returned the last one of the circular list of descriptor(s)
2458 * from prep_xxx, so the argument to submit corresponds to the last
2459 * descriptor of the list.
2461 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2463 struct dma_pl330_desc *desc, *last = to_desc(tx);
2464 struct dma_pl330_chan *pch = to_pchan(tx->chan);
2465 dma_cookie_t cookie;
2466 unsigned long flags;
2468 spin_lock_irqsave(&pch->lock, flags);
2470 /* Assign cookies to all nodes */
2471 while (!list_empty(&last->node)) {
2472 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2473 if (pch->cyclic) {
2474 desc->txd.callback = last->txd.callback;
2475 desc->txd.callback_param = last->txd.callback_param;
2478 dma_cookie_assign(&desc->txd);
2480 list_move_tail(&desc->node, &pch->submitted_list);
2483 cookie = dma_cookie_assign(&last->txd);
2484 list_add_tail(&last->node, &pch->submitted_list);
2485 spin_unlock_irqrestore(&pch->lock, flags);
2487 return cookie;
2490 static inline void _init_desc(struct dma_pl330_desc *desc)
2492 desc->req.x = &desc->px;
2493 desc->req.token = desc;
2494 desc->rqcfg.swap = SWAP_NO;
2495 desc->rqcfg.scctl = SCCTRL0;
2496 desc->rqcfg.dcctl = DCCTRL0;
2497 desc->req.cfg = &desc->rqcfg;
2498 desc->req.xfer_cb = dma_pl330_rqcb;
2499 desc->txd.tx_submit = pl330_tx_submit;
2501 INIT_LIST_HEAD(&desc->node);
2504 /* Returns the number of descriptors added to the DMAC pool */
2505 static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
2507 struct dma_pl330_desc *desc;
2508 unsigned long flags;
2509 int i;
2511 if (!pdmac)
2512 return 0;
2514 desc = kcalloc(count, sizeof(*desc), flg);
2515 if (!desc)
2516 return 0;
2518 spin_lock_irqsave(&pdmac->pool_lock, flags);
2520 for (i = 0; i < count; i++) {
2521 _init_desc(&desc[i]);
2522 list_add_tail(&desc[i].node, &pdmac->desc_pool);
2525 spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2527 return count;
2530 static struct dma_pl330_desc *
2531 pluck_desc(struct dma_pl330_dmac *pdmac)
2533 struct dma_pl330_desc *desc = NULL;
2534 unsigned long flags;
2536 if (!pdmac)
2537 return NULL;
2539 spin_lock_irqsave(&pdmac->pool_lock, flags);
2541 if (!list_empty(&pdmac->desc_pool)) {
2542 desc = list_entry(pdmac->desc_pool.next,
2543 struct dma_pl330_desc, node);
2545 list_del_init(&desc->node);
2547 desc->status = PREP;
2548 desc->txd.callback = NULL;
2551 spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2553 return desc;
2556 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2558 struct dma_pl330_dmac *pdmac = pch->dmac;
2559 u8 *peri_id = pch->chan.private;
2560 struct dma_pl330_desc *desc;
2562 /* Pluck one desc from the pool of DMAC */
2563 desc = pluck_desc(pdmac);
2565 /* If the DMAC pool is empty, alloc new */
2566 if (!desc) {
2567 if (!add_desc(pdmac, GFP_ATOMIC, 1))
2568 return NULL;
2570 /* Try again */
2571 desc = pluck_desc(pdmac);
2572 if (!desc) {
2573 dev_err(pch->dmac->pif.dev,
2574 "%s:%d ALERT!\n", __func__, __LINE__);
2575 return NULL;
2579 /* Initialize the descriptor */
2580 desc->pchan = pch;
2581 desc->txd.cookie = 0;
2582 async_tx_ack(&desc->txd);
2584 desc->req.peri = peri_id ? pch->chan.chan_id : 0;
2585 desc->rqcfg.pcfg = &pch->dmac->pif.pcfg;
2587 dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2589 return desc;
2592 static inline void fill_px(struct pl330_xfer *px,
2593 dma_addr_t dst, dma_addr_t src, size_t len)
2595 px->next = NULL;
2596 px->bytes = len;
2597 px->dst_addr = dst;
2598 px->src_addr = src;
2601 static struct dma_pl330_desc *
2602 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2603 dma_addr_t src, size_t len)
2605 struct dma_pl330_desc *desc = pl330_get_desc(pch);
2607 if (!desc) {
2608 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2609 __func__, __LINE__);
2610 return NULL;
2614 * Ideally we should lookout for reqs bigger than
2615 * those that can be programmed with 256 bytes of
2616 * MC buffer, but considering a req size is seldom
2617 * going to be word-unaligned and more than 200MB,
2618 * we take it easy.
2619 * Also, should the limit is reached we'd rather
2620 * have the platform increase MC buffer size than
2621 * complicating this API driver.
2623 fill_px(&desc->px, dst, src, len);
2625 return desc;
2628 /* Call after fixing burst size */
2629 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2631 struct dma_pl330_chan *pch = desc->pchan;
2632 struct pl330_info *pi = &pch->dmac->pif;
2633 int burst_len;
2635 burst_len = pi->pcfg.data_bus_width / 8;
2636 burst_len *= pi->pcfg.data_buf_dep;
2637 burst_len >>= desc->rqcfg.brst_size;
2639 /* src/dst_burst_len can't be more than 16 */
2640 if (burst_len > 16)
2641 burst_len = 16;
2643 while (burst_len > 1) {
2644 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2645 break;
2646 burst_len--;
2649 return burst_len;
2652 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2653 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2654 size_t period_len, enum dma_transfer_direction direction,
2655 unsigned long flags, void *context)
2657 struct dma_pl330_desc *desc = NULL, *first = NULL;
2658 struct dma_pl330_chan *pch = to_pchan(chan);
2659 struct dma_pl330_dmac *pdmac = pch->dmac;
2660 unsigned int i;
2661 dma_addr_t dst;
2662 dma_addr_t src;
2664 if (len % period_len != 0)
2665 return NULL;
2667 if (!is_slave_direction(direction)) {
2668 dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
2669 __func__, __LINE__);
2670 return NULL;
2673 for (i = 0; i < len / period_len; i++) {
2674 desc = pl330_get_desc(pch);
2675 if (!desc) {
2676 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2677 __func__, __LINE__);
2679 if (!first)
2680 return NULL;
2682 spin_lock_irqsave(&pdmac->pool_lock, flags);
2684 while (!list_empty(&first->node)) {
2685 desc = list_entry(first->node.next,
2686 struct dma_pl330_desc, node);
2687 list_move_tail(&desc->node, &pdmac->desc_pool);
2690 list_move_tail(&first->node, &pdmac->desc_pool);
2692 spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2694 return NULL;
2697 switch (direction) {
2698 case DMA_MEM_TO_DEV:
2699 desc->rqcfg.src_inc = 1;
2700 desc->rqcfg.dst_inc = 0;
2701 desc->req.rqtype = MEMTODEV;
2702 src = dma_addr;
2703 dst = pch->fifo_addr;
2704 break;
2705 case DMA_DEV_TO_MEM:
2706 desc->rqcfg.src_inc = 0;
2707 desc->rqcfg.dst_inc = 1;
2708 desc->req.rqtype = DEVTOMEM;
2709 src = pch->fifo_addr;
2710 dst = dma_addr;
2711 break;
2712 default:
2713 break;
2716 desc->rqcfg.brst_size = pch->burst_sz;
2717 desc->rqcfg.brst_len = 1;
2718 fill_px(&desc->px, dst, src, period_len);
2720 if (!first)
2721 first = desc;
2722 else
2723 list_add_tail(&desc->node, &first->node);
2725 dma_addr += period_len;
2728 if (!desc)
2729 return NULL;
2731 pch->cyclic = true;
2732 desc->txd.flags = flags;
2734 return &desc->txd;
2737 static struct dma_async_tx_descriptor *
2738 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2739 dma_addr_t src, size_t len, unsigned long flags)
2741 struct dma_pl330_desc *desc;
2742 struct dma_pl330_chan *pch = to_pchan(chan);
2743 struct pl330_info *pi;
2744 int burst;
2746 if (unlikely(!pch || !len))
2747 return NULL;
2749 pi = &pch->dmac->pif;
2751 desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2752 if (!desc)
2753 return NULL;
2755 desc->rqcfg.src_inc = 1;
2756 desc->rqcfg.dst_inc = 1;
2757 desc->req.rqtype = MEMTOMEM;
2759 /* Select max possible burst size */
2760 burst = pi->pcfg.data_bus_width / 8;
2762 while (burst > 1) {
2763 if (!(len % burst))
2764 break;
2765 burst /= 2;
2768 desc->rqcfg.brst_size = 0;
2769 while (burst != (1 << desc->rqcfg.brst_size))
2770 desc->rqcfg.brst_size++;
2772 desc->rqcfg.brst_len = get_burst_len(desc, len);
2774 desc->txd.flags = flags;
2776 return &desc->txd;
2779 static void __pl330_giveback_desc(struct dma_pl330_dmac *pdmac,
2780 struct dma_pl330_desc *first)
2782 unsigned long flags;
2783 struct dma_pl330_desc *desc;
2785 if (!first)
2786 return;
2788 spin_lock_irqsave(&pdmac->pool_lock, flags);
2790 while (!list_empty(&first->node)) {
2791 desc = list_entry(first->node.next,
2792 struct dma_pl330_desc, node);
2793 list_move_tail(&desc->node, &pdmac->desc_pool);
2796 list_move_tail(&first->node, &pdmac->desc_pool);
2798 spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2801 static struct dma_async_tx_descriptor *
2802 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2803 unsigned int sg_len, enum dma_transfer_direction direction,
2804 unsigned long flg, void *context)
2806 struct dma_pl330_desc *first, *desc = NULL;
2807 struct dma_pl330_chan *pch = to_pchan(chan);
2808 struct scatterlist *sg;
2809 int i;
2810 dma_addr_t addr;
2812 if (unlikely(!pch || !sgl || !sg_len))
2813 return NULL;
2815 addr = pch->fifo_addr;
2817 first = NULL;
2819 for_each_sg(sgl, sg, sg_len, i) {
2821 desc = pl330_get_desc(pch);
2822 if (!desc) {
2823 struct dma_pl330_dmac *pdmac = pch->dmac;
2825 dev_err(pch->dmac->pif.dev,
2826 "%s:%d Unable to fetch desc\n",
2827 __func__, __LINE__);
2828 __pl330_giveback_desc(pdmac, first);
2830 return NULL;
2833 if (!first)
2834 first = desc;
2835 else
2836 list_add_tail(&desc->node, &first->node);
2838 if (direction == DMA_MEM_TO_DEV) {
2839 desc->rqcfg.src_inc = 1;
2840 desc->rqcfg.dst_inc = 0;
2841 desc->req.rqtype = MEMTODEV;
2842 fill_px(&desc->px,
2843 addr, sg_dma_address(sg), sg_dma_len(sg));
2844 } else {
2845 desc->rqcfg.src_inc = 0;
2846 desc->rqcfg.dst_inc = 1;
2847 desc->req.rqtype = DEVTOMEM;
2848 fill_px(&desc->px,
2849 sg_dma_address(sg), addr, sg_dma_len(sg));
2852 desc->rqcfg.brst_size = pch->burst_sz;
2853 desc->rqcfg.brst_len = 1;
2856 /* Return the last desc in the chain */
2857 desc->txd.flags = flg;
2858 return &desc->txd;
2861 static irqreturn_t pl330_irq_handler(int irq, void *data)
2863 if (pl330_update(data))
2864 return IRQ_HANDLED;
2865 else
2866 return IRQ_NONE;
2869 #define PL330_DMA_BUSWIDTHS \
2870 BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2871 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2872 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2873 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2874 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2876 static int pl330_dma_device_slave_caps(struct dma_chan *dchan,
2877 struct dma_slave_caps *caps)
2879 caps->src_addr_widths = PL330_DMA_BUSWIDTHS;
2880 caps->dstn_addr_widths = PL330_DMA_BUSWIDTHS;
2881 caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2882 caps->cmd_pause = false;
2883 caps->cmd_terminate = true;
2884 caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
2886 return 0;
2889 static int
2890 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2892 struct dma_pl330_platdata *pdat;
2893 struct dma_pl330_dmac *pdmac;
2894 struct dma_pl330_chan *pch, *_p;
2895 struct pl330_info *pi;
2896 struct dma_device *pd;
2897 struct resource *res;
2898 int i, ret, irq;
2899 int num_chan;
2901 pdat = dev_get_platdata(&adev->dev);
2903 ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2904 if (ret)
2905 return ret;
2907 /* Allocate a new DMAC and its Channels */
2908 pdmac = devm_kzalloc(&adev->dev, sizeof(*pdmac), GFP_KERNEL);
2909 if (!pdmac) {
2910 dev_err(&adev->dev, "unable to allocate mem\n");
2911 return -ENOMEM;
2914 pi = &pdmac->pif;
2915 pi->dev = &adev->dev;
2916 pi->pl330_data = NULL;
2917 pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2919 res = &adev->res;
2920 pi->base = devm_ioremap_resource(&adev->dev, res);
2921 if (IS_ERR(pi->base))
2922 return PTR_ERR(pi->base);
2924 amba_set_drvdata(adev, pdmac);
2926 for (i = 0; i < AMBA_NR_IRQS; i++) {
2927 irq = adev->irq[i];
2928 if (irq) {
2929 ret = devm_request_irq(&adev->dev, irq,
2930 pl330_irq_handler, 0,
2931 dev_name(&adev->dev), pi);
2932 if (ret)
2933 return ret;
2934 } else {
2935 break;
2939 pi->pcfg.periph_id = adev->periphid;
2940 ret = pl330_add(pi);
2941 if (ret)
2942 return ret;
2944 INIT_LIST_HEAD(&pdmac->desc_pool);
2945 spin_lock_init(&pdmac->pool_lock);
2947 /* Create a descriptor pool of default size */
2948 if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC))
2949 dev_warn(&adev->dev, "unable to allocate desc\n");
2951 pd = &pdmac->ddma;
2952 INIT_LIST_HEAD(&pd->channels);
2954 /* Initialize channel parameters */
2955 if (pdat)
2956 num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan);
2957 else
2958 num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan);
2960 pdmac->num_peripherals = num_chan;
2962 pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2963 if (!pdmac->peripherals) {
2964 ret = -ENOMEM;
2965 dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n");
2966 goto probe_err2;
2969 for (i = 0; i < num_chan; i++) {
2970 pch = &pdmac->peripherals[i];
2971 if (!adev->dev.of_node)
2972 pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2973 else
2974 pch->chan.private = adev->dev.of_node;
2976 INIT_LIST_HEAD(&pch->submitted_list);
2977 INIT_LIST_HEAD(&pch->work_list);
2978 INIT_LIST_HEAD(&pch->completed_list);
2979 spin_lock_init(&pch->lock);
2980 pch->pl330_chid = NULL;
2981 pch->chan.device = pd;
2982 pch->dmac = pdmac;
2984 /* Add the channel to the DMAC list */
2985 list_add_tail(&pch->chan.device_node, &pd->channels);
2988 pd->dev = &adev->dev;
2989 if (pdat) {
2990 pd->cap_mask = pdat->cap_mask;
2991 } else {
2992 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2993 if (pi->pcfg.num_peri) {
2994 dma_cap_set(DMA_SLAVE, pd->cap_mask);
2995 dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2996 dma_cap_set(DMA_PRIVATE, pd->cap_mask);
3000 pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
3001 pd->device_free_chan_resources = pl330_free_chan_resources;
3002 pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
3003 pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
3004 pd->device_tx_status = pl330_tx_status;
3005 pd->device_prep_slave_sg = pl330_prep_slave_sg;
3006 pd->device_control = pl330_control;
3007 pd->device_issue_pending = pl330_issue_pending;
3008 pd->device_slave_caps = pl330_dma_device_slave_caps;
3010 ret = dma_async_device_register(pd);
3011 if (ret) {
3012 dev_err(&adev->dev, "unable to register DMAC\n");
3013 goto probe_err3;
3016 if (adev->dev.of_node) {
3017 ret = of_dma_controller_register(adev->dev.of_node,
3018 of_dma_pl330_xlate, pdmac);
3019 if (ret) {
3020 dev_err(&adev->dev,
3021 "unable to register DMA to the generic DT DMA helpers\n");
3025 adev->dev.dma_parms = &pdmac->dma_parms;
3028 * This is the limit for transfers with a buswidth of 1, larger
3029 * buswidths will have larger limits.
3031 ret = dma_set_max_seg_size(&adev->dev, 1900800);
3032 if (ret)
3033 dev_err(&adev->dev, "unable to set the seg size\n");
3036 dev_info(&adev->dev,
3037 "Loaded driver for PL330 DMAC-%d\n", adev->periphid);
3038 dev_info(&adev->dev,
3039 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
3040 pi->pcfg.data_buf_dep,
3041 pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
3042 pi->pcfg.num_peri, pi->pcfg.num_events);
3044 return 0;
3045 probe_err3:
3046 /* Idle the DMAC */
3047 list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
3048 chan.device_node) {
3050 /* Remove the channel */
3051 list_del(&pch->chan.device_node);
3053 /* Flush the channel */
3054 pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
3055 pl330_free_chan_resources(&pch->chan);
3057 probe_err2:
3058 pl330_del(pi);
3060 return ret;
3063 static int pl330_remove(struct amba_device *adev)
3065 struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev);
3066 struct dma_pl330_chan *pch, *_p;
3067 struct pl330_info *pi;
3069 if (!pdmac)
3070 return 0;
3072 if (adev->dev.of_node)
3073 of_dma_controller_free(adev->dev.of_node);
3075 dma_async_device_unregister(&pdmac->ddma);
3077 /* Idle the DMAC */
3078 list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
3079 chan.device_node) {
3081 /* Remove the channel */
3082 list_del(&pch->chan.device_node);
3084 /* Flush the channel */
3085 pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
3086 pl330_free_chan_resources(&pch->chan);
3089 pi = &pdmac->pif;
3091 pl330_del(pi);
3093 return 0;
3096 static struct amba_id pl330_ids[] = {
3098 .id = 0x00041330,
3099 .mask = 0x000fffff,
3101 { 0, 0 },
3104 MODULE_DEVICE_TABLE(amba, pl330_ids);
3106 static struct amba_driver pl330_driver = {
3107 .drv = {
3108 .owner = THIS_MODULE,
3109 .name = "dma-pl330",
3111 .id_table = pl330_ids,
3112 .probe = pl330_probe,
3113 .remove = pl330_remove,
3116 module_amba_driver(pl330_driver);
3118 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
3119 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3120 MODULE_LICENSE("GPL");