2 * Synopsys DesignWare I2C adapter driver (master only).
4 * Based on the TI DAVINCI I2C adapter driver.
6 * Copyright (C) 2006 Texas Instruments.
7 * Copyright (C) 2007 MontaVista Software Inc.
8 * Copyright (C) 2009 Provigent Ltd.
10 * ----------------------------------------------------------------------------
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 * ----------------------------------------------------------------------------
30 #define DW_IC_CON_MASTER 0x1
31 #define DW_IC_CON_SPEED_STD 0x2
32 #define DW_IC_CON_SPEED_FAST 0x4
33 #define DW_IC_CON_10BITADDR_MASTER 0x10
34 #define DW_IC_CON_RESTART_EN 0x20
35 #define DW_IC_CON_SLAVE_DISABLE 0x40
39 * struct dw_i2c_dev - private i2c-designware data
40 * @dev: driver model device node
41 * @base: IO registers pointer
42 * @cmd_complete: tx completion indicator
43 * @lock: protect this struct and IO registers
44 * @clk: input reference clock
45 * @cmd_err: run time hadware error code
46 * @msgs: points to an array of messages currently being transfered
47 * @msgs_num: the number of elements in msgs
48 * @msg_write_idx: the element index of the current tx message in the msgs
50 * @tx_buf_len: the length of the current tx buffer
51 * @tx_buf: the current tx buffer
52 * @msg_read_idx: the element index of the current rx message in the msgs
54 * @rx_buf_len: the length of the current rx buffer
55 * @rx_buf: the current rx buffer
56 * @msg_err: error status of the current transfer
57 * @status: i2c master status, one of STATUS_*
58 * @abort_source: copy of the TX_ABRT_SOURCE register
59 * @irq: interrupt number for the i2c master
60 * @adapter: i2c subsystem adapter node
61 * @tx_fifo_depth: depth of the hardware tx fifo
62 * @rx_fifo_depth: depth of the hardware rx fifo
63 * @rx_outstanding: current master-rx elements in tx fifo
64 * @ss_hcnt: standard speed HCNT value
65 * @ss_lcnt: standard speed LCNT value
66 * @fs_hcnt: fast speed HCNT value
67 * @fs_lcnt: fast speed LCNT value
69 * HCNT and LCNT parameters can be used if the platform knows more accurate
70 * values than the one computed based only on the input clock frequency.
71 * Leave them to be %0 if not used.
76 struct completion cmd_complete
;
79 u32 (*get_clk_rate_khz
) (struct dw_i2c_dev
*dev
);
80 struct dw_pci_controller
*controller
;
95 struct i2c_adapter adapter
;
98 unsigned int tx_fifo_depth
;
99 unsigned int rx_fifo_depth
;
108 #define ACCESS_SWAP 0x00000001
109 #define ACCESS_16BIT 0x00000002
111 extern u32
dw_readl(struct dw_i2c_dev
*dev
, int offset
);
112 extern void dw_writel(struct dw_i2c_dev
*dev
, u32 b
, int offset
);
113 extern int i2c_dw_init(struct dw_i2c_dev
*dev
);
114 extern int i2c_dw_xfer(struct i2c_adapter
*adap
, struct i2c_msg msgs
[],
116 extern u32
i2c_dw_func(struct i2c_adapter
*adap
);
117 extern irqreturn_t
i2c_dw_isr(int this_irq
, void *dev_id
);
118 extern void i2c_dw_enable(struct dw_i2c_dev
*dev
);
119 extern u32
i2c_dw_is_enabled(struct dw_i2c_dev
*dev
);
120 extern void i2c_dw_disable(struct dw_i2c_dev
*dev
);
121 extern void i2c_dw_clear_int(struct dw_i2c_dev
*dev
);
122 extern void i2c_dw_disable_int(struct dw_i2c_dev
*dev
);
123 extern u32
i2c_dw_read_comp_param(struct dw_i2c_dev
*dev
);