| blob | db5c2cab8fda4251bb636aa5567afafe5cfdb406 |
1 comment "Processor Type"
3 # Select CPU types depending on the architecture selected. This selects
4 # which CPUs we support in the kernel image, and the compiler instruction
5 # optimiser behaviour.
7 # ARM7TDMI
8 config CPU_ARM7TDMI
9 bool "Support ARM7TDMI processor"
10 depends on !MMU
11 select CPU_32v4T
12 select CPU_ABRT_LV4T
13 select CPU_CACHE_V4
14 select CPU_PABRT_LEGACY
15 help
16 A 32-bit RISC microprocessor based on the ARM7 processor core
17 which has no memory control unit and cache.
19 Say Y if you want support for the ARM7TDMI processor.
20 Otherwise, say N.
22 # ARM720T
23 config CPU_ARM720T
24 bool "Support ARM720T processor" if ARCH_INTEGRATOR
25 select CPU_32v4T
26 select CPU_ABRT_LV4T
27 select CPU_CACHE_V4
28 select CPU_CACHE_VIVT
29 select CPU_COPY_V4WT if MMU
30 select CPU_CP15_MMU
31 select CPU_PABRT_LEGACY
32 select CPU_TLB_V4WT if MMU
33 help
34 A 32-bit RISC processor with 8kByte Cache, Write Buffer and
35 MMU built around an ARM7TDMI core.
37 Say Y if you want support for the ARM720T processor.
38 Otherwise, say N.
40 # ARM740T
41 config CPU_ARM740T
42 bool "Support ARM740T processor" if ARCH_INTEGRATOR
43 depends on !MMU
44 select CPU_32v4T
45 select CPU_ABRT_LV4T
46 select CPU_CACHE_V4
47 select CPU_CP15_MPU
48 select CPU_PABRT_LEGACY
49 help
50 A 32-bit RISC processor with 8KB cache or 4KB variants,
51 write buffer and MPU(Protection Unit) built around
52 an ARM7TDMI core.
54 Say Y if you want support for the ARM740T processor.
55 Otherwise, say N.
57 # ARM9TDMI
58 config CPU_ARM9TDMI
59 bool "Support ARM9TDMI processor"
60 depends on !MMU
61 select CPU_32v4T
62 select CPU_ABRT_NOMMU
63 select CPU_CACHE_V4
64 select CPU_PABRT_LEGACY
65 help
66 A 32-bit RISC microprocessor based on the ARM9 processor core
67 which has no memory control unit and cache.
69 Say Y if you want support for the ARM9TDMI processor.
70 Otherwise, say N.
72 # ARM920T
73 config CPU_ARM920T
74 bool "Support ARM920T processor" if ARCH_INTEGRATOR
75 select CPU_32v4T
76 select CPU_ABRT_EV4T
77 select CPU_CACHE_V4WT
78 select CPU_CACHE_VIVT
79 select CPU_COPY_V4WB if MMU
80 select CPU_CP15_MMU
81 select CPU_PABRT_LEGACY
82 select CPU_TLB_V4WBI if MMU
83 help
84 The ARM920T is licensed to be produced by numerous vendors,
85 and is used in the Cirrus EP93xx and the Samsung S3C2410.
87 Say Y if you want support for the ARM920T processor.
88 Otherwise, say N.
90 # ARM922T
91 config CPU_ARM922T
92 bool "Support ARM922T processor" if ARCH_INTEGRATOR
93 select CPU_32v4T
94 select CPU_ABRT_EV4T
95 select CPU_CACHE_V4WT
96 select CPU_CACHE_VIVT
97 select CPU_COPY_V4WB if MMU
98 select CPU_CP15_MMU
99 select CPU_PABRT_LEGACY
100 select CPU_TLB_V4WBI if MMU
101 help
102 The ARM922T is a version of the ARM920T, but with smaller
103 instruction and data caches. It is used in Altera's
104 Excalibur XA device family and Micrel's KS8695 Centaur.
106 Say Y if you want support for the ARM922T processor.
107 Otherwise, say N.
109 # ARM925T
110 config CPU_ARM925T
111 bool "Support ARM925T processor" if ARCH_OMAP1
112 select CPU_32v4T
113 select CPU_ABRT_EV4T
114 select CPU_CACHE_V4WT
115 select CPU_CACHE_VIVT
116 select CPU_COPY_V4WB if MMU
117 select CPU_CP15_MMU
118 select CPU_PABRT_LEGACY
119 select CPU_TLB_V4WBI if MMU
120 help
121 The ARM925T is a mix between the ARM920T and ARM926T, but with
122 different instruction and data caches. It is used in TI's OMAP
123 device family.
125 Say Y if you want support for the ARM925T processor.
126 Otherwise, say N.
128 # ARM926T
129 config CPU_ARM926T
130 bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
131 select CPU_32v5
132 select CPU_ABRT_EV5TJ
133 select CPU_CACHE_VIVT
134 select CPU_COPY_V4WB if MMU
135 select CPU_CP15_MMU
136 select CPU_PABRT_LEGACY
137 select CPU_TLB_V4WBI if MMU
138 help
139 This is a variant of the ARM920. It has slightly different
140 instruction sequences for cache and TLB operations. Curiously,
141 there is no documentation on it at the ARM corporate website.
143 Say Y if you want support for the ARM926T processor.
144 Otherwise, say N.
146 # FA526
147 config CPU_FA526
148 bool
149 select CPU_32v4
150 select CPU_ABRT_EV4
151 select CPU_CACHE_FA
152 select CPU_CACHE_VIVT
153 select CPU_COPY_FA if MMU
154 select CPU_CP15_MMU
155 select CPU_PABRT_LEGACY
156 select CPU_TLB_FA if MMU
157 help
158 The FA526 is a version of the ARMv4 compatible processor with
159 Branch Target Buffer, Unified TLB and cache line size 16.
161 Say Y if you want support for the FA526 processor.
162 Otherwise, say N.
164 # ARM940T
165 config CPU_ARM940T
166 bool "Support ARM940T processor" if ARCH_INTEGRATOR
167 depends on !MMU
168 select CPU_32v4T
169 select CPU_ABRT_NOMMU
170 select CPU_CACHE_VIVT
171 select CPU_CP15_MPU
172 select CPU_PABRT_LEGACY
173 help
174 ARM940T is a member of the ARM9TDMI family of general-
175 purpose microprocessors with MPU and separate 4KB
176 instruction and 4KB data cases, each with a 4-word line
177 length.
179 Say Y if you want support for the ARM940T processor.
180 Otherwise, say N.
182 # ARM946E-S
183 config CPU_ARM946E
184 bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
185 depends on !MMU
186 select CPU_32v5
187 select CPU_ABRT_NOMMU
188 select CPU_CACHE_VIVT
189 select CPU_CP15_MPU
190 select CPU_PABRT_LEGACY
191 help
192 ARM946E-S is a member of the ARM9E-S family of high-
193 performance, 32-bit system-on-chip processor solutions.
194 The TCM and ARMv5TE 32-bit instruction set is supported.
196 Say Y if you want support for the ARM946E-S processor.
197 Otherwise, say N.
199 # ARM1020 - needs validating
200 config CPU_ARM1020
201 bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
202 select CPU_32v5
203 select CPU_ABRT_EV4T
204 select CPU_CACHE_V4WT
205 select CPU_CACHE_VIVT
206 select CPU_COPY_V4WB if MMU
207 select CPU_CP15_MMU
208 select CPU_PABRT_LEGACY
209 select CPU_TLB_V4WBI if MMU
210 help
211 The ARM1020 is the 32K cached version of the ARM10 processor,
212 with an addition of a floating-point unit.
214 Say Y if you want support for the ARM1020 processor.
215 Otherwise, say N.
217 # ARM1020E - needs validating
218 config CPU_ARM1020E
219 bool "Support ARM1020E processor" if ARCH_INTEGRATOR
220 depends on n
221 select CPU_32v5
222 select CPU_ABRT_EV4T
223 select CPU_CACHE_V4WT
224 select CPU_CACHE_VIVT
225 select CPU_COPY_V4WB if MMU
226 select CPU_CP15_MMU
227 select CPU_PABRT_LEGACY
228 select CPU_TLB_V4WBI if MMU
230 # ARM1022E
231 config CPU_ARM1022
232 bool "Support ARM1022E processor" if ARCH_INTEGRATOR
233 select CPU_32v5
234 select CPU_ABRT_EV4T
235 select CPU_CACHE_VIVT
236 select CPU_COPY_V4WB if MMU # can probably do better
237 select CPU_CP15_MMU
238 select CPU_PABRT_LEGACY
239 select CPU_TLB_V4WBI if MMU
240 help
241 The ARM1022E is an implementation of the ARMv5TE architecture
242 based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
243 embedded trace macrocell, and a floating-point unit.
245 Say Y if you want support for the ARM1022E processor.
246 Otherwise, say N.
248 # ARM1026EJ-S
249 config CPU_ARM1026
250 bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
251 select CPU_32v5
252 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
253 select CPU_CACHE_VIVT
254 select CPU_COPY_V4WB if MMU # can probably do better
255 select CPU_CP15_MMU
256 select CPU_PABRT_LEGACY
257 select CPU_TLB_V4WBI if MMU
258 help
259 The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
260 based upon the ARM10 integer core.
262 Say Y if you want support for the ARM1026EJ-S processor.
263 Otherwise, say N.
265 # SA110
266 config CPU_SA110
267 bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
268 select CPU_32v3 if ARCH_RPC
269 select CPU_32v4 if !ARCH_RPC
270 select CPU_ABRT_EV4
271 select CPU_CACHE_V4WB
272 select CPU_CACHE_VIVT
273 select CPU_COPY_V4WB if MMU
274 select CPU_CP15_MMU
275 select CPU_PABRT_LEGACY
276 select CPU_TLB_V4WB if MMU
277 help
278 The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
279 is available at five speeds ranging from 100 MHz to 233 MHz.
280 More information is available at
281 <http://developer.intel.com/design/strong/sa110.htm>.
283 Say Y if you want support for the SA-110 processor.
284 Otherwise, say N.
286 # SA1100
287 config CPU_SA1100
288 bool
289 select CPU_32v4
290 select CPU_ABRT_EV4
291 select CPU_CACHE_V4WB
292 select CPU_CACHE_VIVT
293 select CPU_CP15_MMU
294 select CPU_PABRT_LEGACY
295 select CPU_TLB_V4WB if MMU
297 # XScale
298 config CPU_XSCALE
299 bool
300 select CPU_32v5
301 select CPU_ABRT_EV5T
302 select CPU_CACHE_VIVT
303 select CPU_CP15_MMU
304 select CPU_PABRT_LEGACY
305 select CPU_TLB_V4WBI if MMU
307 # XScale Core Version 3
308 config CPU_XSC3
309 bool
310 select CPU_32v5
311 select CPU_ABRT_EV5T
312 select CPU_CACHE_VIVT
313 select CPU_CP15_MMU
314 select CPU_PABRT_LEGACY
315 select CPU_TLB_V4WBI if MMU
316 select IO_36
318 # Marvell PJ1 (Mohawk)
319 config CPU_MOHAWK
320 bool
321 select CPU_32v5
322 select CPU_ABRT_EV5T
323 select CPU_CACHE_VIVT
324 select CPU_COPY_V4WB if MMU
325 select CPU_CP15_MMU
326 select CPU_PABRT_LEGACY
327 select CPU_TLB_V4WBI if MMU
329 # Feroceon
330 config CPU_FEROCEON
331 bool
332 select CPU_32v5
333 select CPU_ABRT_EV5T
334 select CPU_CACHE_VIVT
335 select CPU_COPY_FEROCEON if MMU
336 select CPU_CP15_MMU
337 select CPU_PABRT_LEGACY
338 select CPU_TLB_FEROCEON if MMU
340 config CPU_FEROCEON_OLD_ID
341 bool "Accept early Feroceon cores with an ARM926 ID"
342 depends on CPU_FEROCEON && !CPU_ARM926T
343 default y
344 help
345 This enables the usage of some old Feroceon cores
346 for which the CPU ID is equal to the ARM926 ID.
347 Relevant for Feroceon-1850 and early Feroceon-2850.
349 # Marvell PJ4
350 config CPU_PJ4
351 bool
352 select ARM_THUMBEE
353 select CPU_V7
355 config CPU_PJ4B
356 bool
357 select CPU_V7
359 # ARMv6
360 config CPU_V6
361 bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
362 select CPU_32v6
363 select CPU_ABRT_EV6
364 select CPU_CACHE_V6
365 select CPU_CACHE_VIPT
366 select CPU_COPY_V6 if MMU
367 select CPU_CP15_MMU
368 select CPU_HAS_ASID if MMU
369 select CPU_PABRT_V6
370 select CPU_TLB_V6 if MMU
372 # ARMv6k
373 config CPU_V6K
374 bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
375 select CPU_32v6
376 select CPU_32v6K
377 select CPU_ABRT_EV6
378 select CPU_CACHE_V6
379 select CPU_CACHE_VIPT
380 select CPU_COPY_V6 if MMU
381 select CPU_CP15_MMU
382 select CPU_HAS_ASID if MMU
383 select CPU_PABRT_V6
384 select CPU_TLB_V6 if MMU
386 # ARMv7
387 config CPU_V7
388 bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
389 select CPU_32v6K
390 select CPU_32v7
391 select CPU_ABRT_EV7
392 select CPU_CACHE_V7
393 select CPU_CACHE_VIPT
394 select CPU_COPY_V6 if MMU
395 select CPU_CP15_MMU if MMU
396 select CPU_CP15_MPU if !MMU
397 select CPU_HAS_ASID if MMU
398 select CPU_PABRT_V7
399 select CPU_TLB_V7 if MMU
401 # ARMv7M
402 config CPU_V7M
403 bool
404 select CPU_32v7M
405 select CPU_ABRT_NOMMU
406 select CPU_CACHE_NOP
407 select CPU_PABRT_LEGACY
408 select CPU_THUMBONLY
410 config CPU_THUMBONLY
411 bool
412 # There are no CPUs available with MMU that don't implement an ARM ISA:
413 depends on !MMU
414 help
415 Select this if your CPU doesn't support the 32 bit ARM instructions.
417 # Figure out what processor architecture version we should be using.
418 # This defines the compiler instruction set which depends on the machine type.
419 config CPU_32v3
420 bool
421 select CPU_USE_DOMAINS if MMU
422 select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
423 select TLS_REG_EMUL if SMP || !MMU
424 select NEED_KUSER_HELPERS
426 config CPU_32v4
427 bool
428 select CPU_USE_DOMAINS if MMU
429 select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
430 select TLS_REG_EMUL if SMP || !MMU
431 select NEED_KUSER_HELPERS
433 config CPU_32v4T
434 bool
435 select CPU_USE_DOMAINS if MMU
436 select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
437 select TLS_REG_EMUL if SMP || !MMU
438 select NEED_KUSER_HELPERS
440 config CPU_32v5
441 bool
442 select CPU_USE_DOMAINS if MMU
443 select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
444 select TLS_REG_EMUL if SMP || !MMU
445 select NEED_KUSER_HELPERS
447 config CPU_32v6
448 bool
449 select CPU_USE_DOMAINS if CPU_V6 && MMU
450 select TLS_REG_EMUL if !CPU_32v6K && !MMU
452 config CPU_32v6K
453 bool
455 config CPU_32v7
456 bool
458 config CPU_32v7M
459 bool
461 # The abort model
462 config CPU_ABRT_NOMMU
463 bool
465 config CPU_ABRT_EV4
466 bool
468 config CPU_ABRT_EV4T
469 bool
471 config CPU_ABRT_LV4T
472 bool
474 config CPU_ABRT_EV5T
475 bool
477 config CPU_ABRT_EV5TJ
478 bool
480 config CPU_ABRT_EV6
481 bool
483 config CPU_ABRT_EV7
484 bool
486 config CPU_PABRT_LEGACY
487 bool
489 config CPU_PABRT_V6
490 bool
492 config CPU_PABRT_V7
493 bool
495 # The cache model
496 config CPU_CACHE_V4
497 bool
499 config CPU_CACHE_V4WT
500 bool
502 config CPU_CACHE_V4WB
503 bool
505 config CPU_CACHE_V6
506 bool
508 config CPU_CACHE_V7
509 bool
511 config CPU_CACHE_NOP
512 bool
514 config CPU_CACHE_VIVT
515 bool
517 config CPU_CACHE_VIPT
518 bool
520 config CPU_CACHE_FA
521 bool
523 if MMU
524 # The copy-page model
525 config CPU_COPY_V4WT
526 bool
528 config CPU_COPY_V4WB
529 bool
531 config CPU_COPY_FEROCEON
532 bool
534 config CPU_COPY_FA
535 bool
537 config CPU_COPY_V6
538 bool
540 # This selects the TLB model
541 config CPU_TLB_V4WT
542 bool
543 help
544 ARM Architecture Version 4 TLB with writethrough cache.
546 config CPU_TLB_V4WB
547 bool
548 help
549 ARM Architecture Version 4 TLB with writeback cache.
551 config CPU_TLB_V4WBI
552 bool
553 help
554 ARM Architecture Version 4 TLB with writeback cache and invalidate
555 instruction cache entry.
557 config CPU_TLB_FEROCEON
558 bool
559 help
560 Feroceon TLB (v4wbi with non-outer-cachable page table walks).
562 config CPU_TLB_FA
563 bool
564 help
565 Faraday ARM FA526 architecture, unified TLB with writeback cache
566 and invalidate instruction cache entry. Branch target buffer is
567 also supported.
569 config CPU_TLB_V6
570 bool
572 config CPU_TLB_V7
573 bool
575 config VERIFY_PERMISSION_FAULT
576 bool
577 endif
579 config CPU_HAS_ASID
580 bool
581 help
582 This indicates whether the CPU has the ASID register; used to
583 tag TLB and possibly cache entries.
585 config CPU_CP15
586 bool
587 help
588 Processor has the CP15 register.
590 config CPU_CP15_MMU
591 bool
592 select CPU_CP15
593 help
594 Processor has the CP15 register, which has MMU related registers.
596 config CPU_CP15_MPU
597 bool
598 select CPU_CP15
599 help
600 Processor has the CP15 register, which has MPU related registers.
602 config CPU_USE_DOMAINS
603 bool
604 help
605 This option enables or disables the use of domain switching
606 via the set_fs() function.
608 #
609 # CPU supports 36-bit I/O
610 #
611 config IO_36
612 bool
614 comment "Processor Features"
616 config ARM_LPAE
617 bool "Support for the Large Physical Address Extension"
618 depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
619 !CPU_32v4 && !CPU_32v3
620 help
621 Say Y if you have an ARMv7 processor supporting the LPAE page
622 table format and you would like to access memory beyond the
623 4GB limit. The resulting kernel image will not run on
624 processors without the LPA extension.
626 If unsure, say N.
628 config ARCH_PHYS_ADDR_T_64BIT
629 def_bool ARM_LPAE
631 config ARCH_DMA_ADDR_T_64BIT
632 bool
634 config ARM_THUMB
635 bool "Support Thumb user binaries" if !CPU_THUMBONLY
636 depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || \
637 CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || \
638 CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
639 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || \
640 CPU_V7 || CPU_FEROCEON || CPU_V7M
641 default y
642 help
643 Say Y if you want to include kernel support for running user space
644 Thumb binaries.
646 The Thumb instruction set is a compressed form of the standard ARM
647 instruction set resulting in smaller binaries at the expense of
648 slightly less efficient code.
650 If you don't know what this all is, saying Y is a safe choice.
652 config ARM_THUMBEE
653 bool "Enable ThumbEE CPU extension"
654 depends on CPU_V7
655 help
656 Say Y here if you have a CPU with the ThumbEE extension and code to
657 make use of it. Say N for code that can run on CPUs without ThumbEE.
659 config ARM_VIRT_EXT
660 bool
661 depends on MMU
662 default y if CPU_V7
663 help
664 Enable the kernel to make use of the ARM Virtualization
665 Extensions to install hypervisors without run-time firmware
666 assistance.
668 A compliant bootloader is required in order to make maximum
669 use of this feature. Refer to Documentation/arm/Booting for
670 details.
672 config SWP_EMULATE
673 bool "Emulate SWP/SWPB instructions"
674 depends on !CPU_USE_DOMAINS && CPU_V7
675 default y if SMP
676 select HAVE_PROC_CPU if PROC_FS
677 help
678 ARMv6 architecture deprecates use of the SWP/SWPB instructions.
679 ARMv7 multiprocessing extensions introduce the ability to disable
680 these instructions, triggering an undefined instruction exception
681 when executed. Say Y here to enable software emulation of these
682 instructions for userspace (not kernel) using LDREX/STREX.
683 Also creates /proc/cpu/swp_emulation for statistics.
685 In some older versions of glibc [<=2.8] SWP is used during futex
686 trylock() operations with the assumption that the code will not
687 be preempted. This invalid assumption may be more likely to fail
688 with SWP emulation enabled, leading to deadlock of the user
689 application.
691 NOTE: when accessing uncached shared regions, LDREX/STREX rely
692 on an external transaction monitoring block called a global
693 monitor to maintain update atomicity. If your system does not
694 implement a global monitor, this option can cause programs that
695 perform SWP operations to uncached memory to deadlock.
697 If unsure, say Y.
699 config CPU_BIG_ENDIAN
700 bool "Build big-endian kernel"
701 depends on ARCH_SUPPORTS_BIG_ENDIAN
702 help
703 Say Y if you plan on running a kernel in big-endian mode.
704 Note that your board must be properly built and your board
705 port must properly enable any big-endian related features
706 of your chipset/board/processor.
708 config CPU_ENDIAN_BE8
709 bool
710 depends on CPU_BIG_ENDIAN
711 default CPU_V6 || CPU_V6K || CPU_V7
712 help
713 Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
715 config CPU_ENDIAN_BE32
716 bool
717 depends on CPU_BIG_ENDIAN
718 default !CPU_ENDIAN_BE8
719 help
720 Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
722 config CPU_HIGH_VECTOR
723 depends on !MMU && CPU_CP15 && !CPU_ARM740T
724 bool "Select the High exception vector"
725 help
726 Say Y here to select high exception vector(0xFFFF0000~).
727 The exception vector can vary depending on the platform
728 design in nommu mode. If your platform needs to select
729 high exception vector, say Y.
730 Otherwise or if you are unsure, say N, and the low exception
731 vector (0x00000000~) will be used.
733 config CPU_ICACHE_DISABLE
734 bool "Disable I-Cache (I-bit)"
735 depends on CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
736 help
737 Say Y here to disable the processor instruction cache. Unless
738 you have a reason not to or are unsure, say N.
740 config CPU_DCACHE_DISABLE
741 bool "Disable D-Cache (C-bit)"
742 depends on CPU_CP15
743 help
744 Say Y here to disable the processor data cache. Unless
745 you have a reason not to or are unsure, say N.
747 config CPU_DCACHE_SIZE
748 hex
749 depends on CPU_ARM740T || CPU_ARM946E
750 default 0x00001000 if CPU_ARM740T
751 default 0x00002000 # default size for ARM946E-S
752 help
753 Some cores are synthesizable to have various sized cache. For
754 ARM946E-S case, it can vary from 0KB to 1MB.
755 To support such cache operations, it is efficient to know the size
756 before compile time.
757 If your SoC is configured to have a different size, define the value
758 here with proper conditions.
760 config CPU_DCACHE_WRITETHROUGH
761 bool "Force write through D-cache"
762 depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
763 default y if CPU_ARM925T
764 help
765 Say Y here to use the data cache in writethrough mode. Unless you
766 specifically require this or are unsure, say N.
768 config CPU_CACHE_ROUND_ROBIN
769 bool "Round robin I and D cache replacement algorithm"
770 depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
771 help
772 Say Y here to use the predictable round-robin cache replacement
773 policy. Unless you specifically require this or are unsure, say N.
775 config CPU_BPREDICT_DISABLE
776 bool "Disable branch prediction"
777 depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
778 help
779 Say Y here to disable branch prediction. If unsure, say N.
781 config TLS_REG_EMUL
782 bool
783 select NEED_KUSER_HELPERS
784 help
785 An SMP system using a pre-ARMv6 processor (there are apparently
786 a few prototypes like that in existence) and therefore access to
787 that required register must be emulated.
789 config NEEDS_SYSCALL_FOR_CMPXCHG
790 bool
791 select NEED_KUSER_HELPERS
792 help
793 SMP on a pre-ARMv6 processor? Well OK then.
794 Forget about fast user space cmpxchg support.
795 It is just not possible.
797 config NEED_KUSER_HELPERS
798 bool
800 config KUSER_HELPERS
801 bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
802 default y
803 help
804 Warning: disabling this option may break user programs.
806 Provide kuser helpers in the vector page. The kernel provides
807 helper code to userspace in read only form at a fixed location
808 in the high vector page to allow userspace to be independent of
809 the CPU type fitted to the system. This permits binaries to be
810 run on ARMv4 through to ARMv7 without modification.
812 However, the fixed address nature of these helpers can be used
813 by ROP (return orientated programming) authors when creating
814 exploits.
816 If all of the binaries and libraries which run on your platform
817 are built specifically for your platform, and make no use of
818 these helpers, then you can turn this option off. However,
819 when such an binary or library is run, it will receive a SIGILL
820 signal, which will terminate the program.
822 Say N here only if you are absolutely certain that you do not
823 need these helpers; otherwise, the safe option is to say Y.
825 config DMA_CACHE_RWFO
826 bool "Enable read/write for ownership DMA cache maintenance"
827 depends on CPU_V6K && SMP
828 default y
829 help
830 The Snoop Control Unit on ARM11MPCore does not detect the
831 cache maintenance operations and the dma_{map,unmap}_area()
832 functions may leave stale cache entries on other CPUs. By
833 enabling this option, Read or Write For Ownership in the ARMv6
834 DMA cache maintenance functions is performed. These LDR/STR
835 instructions change the cache line state to shared or modified
836 so that the cache operation has the desired effect.
838 Note that the workaround is only valid on processors that do
839 not perform speculative loads into the D-cache. For such
840 processors, if cache maintenance operations are not broadcast
841 in hardware, other workarounds are needed (e.g. cache
842 maintenance broadcasting in software via FIQ).
844 config OUTER_CACHE
845 bool
847 config OUTER_CACHE_SYNC
848 bool
849 help
850 The outer cache has a outer_cache_fns.sync function pointer
851 that can be used to drain the write buffer of the outer cache.
853 config CACHE_FEROCEON_L2
854 bool "Enable the Feroceon L2 cache controller"
855 depends on ARCH_KIRKWOOD || ARCH_MV78XX0
856 default y
857 select OUTER_CACHE
858 help
859 This option enables the Feroceon L2 cache controller.
861 config CACHE_FEROCEON_L2_WRITETHROUGH
862 bool "Force Feroceon L2 cache write through"
863 depends on CACHE_FEROCEON_L2
864 help
865 Say Y here to use the Feroceon L2 cache in writethrough mode.
866 Unless you specifically require this, say N for writeback mode.
868 config MIGHT_HAVE_CACHE_L2X0
869 bool
870 help
871 This option should be selected by machines which have a L2x0
872 or PL310 cache controller, but where its use is optional.
874 The only effect of this option is to make CACHE_L2X0 and
875 related options available to the user for configuration.
877 Boards or SoCs which always require the cache controller
878 support to be present should select CACHE_L2X0 directly
879 instead of this option, thus preventing the user from
880 inadvertently configuring a broken kernel.
882 config CACHE_L2X0
883 bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
884 default MIGHT_HAVE_CACHE_L2X0
885 select OUTER_CACHE
886 select OUTER_CACHE_SYNC
887 help
888 This option enables the L2x0 PrimeCell.
890 config CACHE_PL310
891 bool
892 depends on CACHE_L2X0
893 default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
894 help
895 This option enables optimisations for the PL310 cache
896 controller.
898 config CACHE_TAUROS2
899 bool "Enable the Tauros2 L2 cache controller"
900 depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
901 default y
902 select OUTER_CACHE
903 help
904 This option enables the Tauros2 L2 cache controller (as
905 found on PJ1/PJ4).
907 config CACHE_XSC3L2
908 bool "Enable the L2 cache on XScale3"
909 depends on CPU_XSC3
910 default y
911 select OUTER_CACHE
912 help
913 This option enables the L2 cache on XScale3.
915 config ARM_L1_CACHE_SHIFT_6
916 bool
917 default y if CPU_V7
918 help
919 Setting ARM L1 cache line size to 64 Bytes.
921 config ARM_L1_CACHE_SHIFT
922 int
923 default 6 if ARM_L1_CACHE_SHIFT_6
924 default 5
926 config ARM_DMA_MEM_BUFFERABLE
927 bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
928 depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
929 MACH_REALVIEW_PB11MP)
930 default y if CPU_V6 || CPU_V6K || CPU_V7
931 help
932 Historically, the kernel has used strongly ordered mappings to
933 provide DMA coherent memory. With the advent of ARMv7, mapping
934 memory with differing types results in unpredictable behaviour,
935 so on these CPUs, this option is forced on.
937 Multiple mappings with differing attributes is also unpredictable
938 on ARMv6 CPUs, but since they do not have aggressive speculative
939 prefetch, no harm appears to occur.
941 However, drivers may be missing the necessary barriers for ARMv6,
942 and therefore turning this on may result in unpredictable driver
943 behaviour. Therefore, we offer this as an option.
945 You are recommended say 'Y' here and debug any affected drivers.
947 config ARCH_HAS_BARRIERS
948 bool
949 help
950 This option allows the use of custom mandatory barriers
951 included via the mach/barriers.h file.