drivers/gpu/drm/vc4/vc4_plane.c

   1 /*
   2  * Copyright (C) 2015 Broadcom
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /**
  10  * DOC: VC4 plane module
  11  *
  12  * Each DRM plane is a layer of pixels being scanned out by the HVS.
  13  *
  14  * At atomic modeset check time, we compute the HVS display element
  15  * state that would be necessary for displaying the plane (giving us a
  16  * chance to figure out if a plane configuration is invalid), then at
  17  * atomic flush time the CRTC will ask us to write our element state
  18  * into the region of the HVS that it has allocated for us.
  19  */
  20
  21 #include "vc4_drv.h"
  22 #include "vc4_regs.h"
  23 #include "drm_atomic_helper.h"
  24 #include "drm_fb_cma_helper.h"
  25 #include "drm_plane_helper.h"
  26
  27 enum vc4_scaling_mode {
  28         VC4_SCALING_NONE,
  29         VC4_SCALING_TPZ,
  30         VC4_SCALING_PPF,
  31 };
  32
  33 struct vc4_plane_state {
  34         struct drm_plane_state base;
  35         /* System memory copy of the display list for this element, computed
  36          * at atomic_check time.
  37          */
  38         u32 *dlist;
  39         u32 dlist_size; /* Number of dwords allocated for the display list */
  40         u32 dlist_count; /* Number of used dwords in the display list. */
  41
  42         /* Offset in the dlist to various words, for pageflip or
  43          * cursor updates.
  44          */
  45         u32 pos0_offset;
  46         u32 pos2_offset;
  47         u32 ptr0_offset;
  48
  49         /* Offset where the plane's dlist was last stored in the
  50          * hardware at vc4_crtc_atomic_flush() time.
  51          */
  52         u32 __iomem *hw_dlist;
  53
  54         /* Clipped coordinates of the plane on the display. */
  55         int crtc_x, crtc_y, crtc_w, crtc_h;
  56         /* Clipped area being scanned from in the FB. */
  57         u32 src_x, src_y;
  58
  59         u32 src_w[2], src_h[2];
  60
  61         /* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
  62         enum vc4_scaling_mode x_scaling[2], y_scaling[2];
  63         bool is_unity;
  64         bool is_yuv;
  65
  66         /* Offset to start scanning out from the start of the plane's
  67          * BO.
  68          */
  69         u32 offsets[3];
  70
  71         /* Our allocation in LBM for temporary storage during scaling. */
  72         struct drm_mm_node lbm;
  73 };
  74
  75 static inline struct vc4_plane_state *
  76 to_vc4_plane_state(struct drm_plane_state *state)
  77 {
  78         return (struct vc4_plane_state *)state;
  79 }
  80
  81 static const struct hvs_format {
  82         u32 drm; /* DRM_FORMAT_* */
  83         u32 hvs; /* HVS_FORMAT_* */
  84         u32 pixel_order;
  85         bool has_alpha;
  86         bool flip_cbcr;
  87 } hvs_formats[] = {
  88         {
  89                 .drm = DRM_FORMAT_XRGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  90                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
  91         },
  92         {
  93                 .drm = DRM_FORMAT_ARGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  94                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
  95         },
  96         {
  97                 .drm = DRM_FORMAT_ABGR8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  98                 .pixel_order = HVS_PIXEL_ORDER_ARGB, .has_alpha = true,
  99         },
 100         {
 101                 .drm = DRM_FORMAT_XBGR8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
 102                 .pixel_order = HVS_PIXEL_ORDER_ARGB, .has_alpha = false,
 103         },
 104         {
 105                 .drm = DRM_FORMAT_RGB565, .hvs = HVS_PIXEL_FORMAT_RGB565,
 106                 .pixel_order = HVS_PIXEL_ORDER_XRGB, .has_alpha = false,
 107         },
 108         {
 109                 .drm = DRM_FORMAT_BGR565, .hvs = HVS_PIXEL_FORMAT_RGB565,
 110                 .pixel_order = HVS_PIXEL_ORDER_XBGR, .has_alpha = false,
 111         },
 112         {
 113                 .drm = DRM_FORMAT_ARGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
 114                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
 115         },
 116         {
 117                 .drm = DRM_FORMAT_XRGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
 118                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
 119         },
 120         {
 121                 .drm = DRM_FORMAT_YUV422,
 122                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
 123         },
 124         {
 125                 .drm = DRM_FORMAT_YVU422,
 126                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
 127                 .flip_cbcr = true,
 128         },
 129         {
 130                 .drm = DRM_FORMAT_YUV420,
 131                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
 132         },
 133         {
 134                 .drm = DRM_FORMAT_YVU420,
 135                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
 136                 .flip_cbcr = true,
 137         },
 138         {
 139                 .drm = DRM_FORMAT_NV12,
 140                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE,
 141         },
 142         {
 143                 .drm = DRM_FORMAT_NV16,
 144                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE,
 145         },
 146 };
 147
 148 static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
 149 {
 150         unsigned i;
 151
 152         for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
 153                 if (hvs_formats[i].drm == drm_format)
 154                         return &hvs_formats[i];
 155         }
 156
 157         return NULL;
 158 }
 159
 160 static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst)
 161 {
 162         if (dst > src)
 163                 return VC4_SCALING_PPF;
 164         else if (dst < src)
 165                 return VC4_SCALING_TPZ;
 166         else
 167                 return VC4_SCALING_NONE;
 168 }
 169
 170 static bool plane_enabled(struct drm_plane_state *state)
 171 {
 172         return state->fb && state->crtc;
 173 }
 174
 175 static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane)
 176 {
 177         struct vc4_plane_state *vc4_state;
 178
 179         if (WARN_ON(!plane->state))
 180                 return NULL;
 181
 182         vc4_state = kmemdup(plane->state, sizeof(*vc4_state), GFP_KERNEL);
 183         if (!vc4_state)
 184                 return NULL;
 185
 186         memset(&vc4_state->lbm, 0, sizeof(vc4_state->lbm));
 187
 188         __drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
 189
 190         if (vc4_state->dlist) {
 191                 vc4_state->dlist = kmemdup(vc4_state->dlist,
 192                                            vc4_state->dlist_count * 4,
 193                                            GFP_KERNEL);
 194                 if (!vc4_state->dlist) {
 195                         kfree(vc4_state);
 196                         return NULL;
 197                 }
 198                 vc4_state->dlist_size = vc4_state->dlist_count;
 199         }
 200
 201         return &vc4_state->base;
 202 }
 203
 204 static void vc4_plane_destroy_state(struct drm_plane *plane,
 205                                     struct drm_plane_state *state)
 206 {
 207         struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 208         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 209
 210         if (vc4_state->lbm.allocated) {
 211                 unsigned long irqflags;
 212
 213                 spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
 214                 drm_mm_remove_node(&vc4_state->lbm);
 215                 spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
 216         }
 217
 218         kfree(vc4_state->dlist);
 219         __drm_atomic_helper_plane_destroy_state(&vc4_state->base);
 220         kfree(state);
 221 }
 222
 223 /* Called during init to allocate the plane's atomic state. */
 224 static void vc4_plane_reset(struct drm_plane *plane)
 225 {
 226         struct vc4_plane_state *vc4_state;
 227
 228         WARN_ON(plane->state);
 229
 230         vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
 231         if (!vc4_state)
 232                 return;
 233
 234         plane->state = &vc4_state->base;
 235         vc4_state->base.plane = plane;
 236 }
 237
 238 static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
 239 {
 240         if (vc4_state->dlist_count == vc4_state->dlist_size) {
 241                 u32 new_size = max(4u, vc4_state->dlist_count * 2);
 242                 u32 *new_dlist = kmalloc(new_size * 4, GFP_KERNEL);
 243
 244                 if (!new_dlist)
 245                         return;
 246                 memcpy(new_dlist, vc4_state->dlist, vc4_state->dlist_count * 4);
 247
 248                 kfree(vc4_state->dlist);
 249                 vc4_state->dlist = new_dlist;
 250                 vc4_state->dlist_size = new_size;
 251         }
 252
 253         vc4_state->dlist[vc4_state->dlist_count++] = val;
 254 }
 255
 256 /* Returns the scl0/scl1 field based on whether the dimensions need to
 257  * be up/down/non-scaled.
 258  *
 259  * This is a replication of a table from the spec.
 260  */
 261 static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
 262 {
 263         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 264
 265         switch (vc4_state->x_scaling[plane] << 2 | vc4_state->y_scaling[plane]) {
 266         case VC4_SCALING_PPF << 2 | VC4_SCALING_PPF:
 267                 return SCALER_CTL0_SCL_H_PPF_V_PPF;
 268         case VC4_SCALING_TPZ << 2 | VC4_SCALING_PPF:
 269                 return SCALER_CTL0_SCL_H_TPZ_V_PPF;
 270         case VC4_SCALING_PPF << 2 | VC4_SCALING_TPZ:
 271                 return SCALER_CTL0_SCL_H_PPF_V_TPZ;
 272         case VC4_SCALING_TPZ << 2 | VC4_SCALING_TPZ:
 273                 return SCALER_CTL0_SCL_H_TPZ_V_TPZ;
 274         case VC4_SCALING_PPF << 2 | VC4_SCALING_NONE:
 275                 return SCALER_CTL0_SCL_H_PPF_V_NONE;
 276         case VC4_SCALING_NONE << 2 | VC4_SCALING_PPF:
 277                 return SCALER_CTL0_SCL_H_NONE_V_PPF;
 278         case VC4_SCALING_NONE << 2 | VC4_SCALING_TPZ:
 279                 return SCALER_CTL0_SCL_H_NONE_V_TPZ;
 280         case VC4_SCALING_TPZ << 2 | VC4_SCALING_NONE:
 281                 return SCALER_CTL0_SCL_H_TPZ_V_NONE;
 282         default:
 283         case VC4_SCALING_NONE << 2 | VC4_SCALING_NONE:
 284                 /* The unity case is independently handled by
 285                  * SCALER_CTL0_UNITY.
 286                  */
 287                 return 0;
 288         }
 289 }
 290
 291 static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
 292 {
 293         struct drm_plane *plane = state->plane;
 294         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 295         struct drm_framebuffer *fb = state->fb;
 296         struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 297         u32 subpixel_src_mask = (1 << 16) - 1;
 298         u32 format = fb->format->format;
 299         int num_planes = fb->format->num_planes;
 300         u32 h_subsample = 1;
 301         u32 v_subsample = 1;
 302         int i;
 303
 304         for (i = 0; i < num_planes; i++)
 305                 vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
 306
 307         /* We don't support subpixel source positioning for scaling. */
 308         if ((state->src_x & subpixel_src_mask) ||
 309             (state->src_y & subpixel_src_mask) ||
 310             (state->src_w & subpixel_src_mask) ||
 311             (state->src_h & subpixel_src_mask)) {
 312                 return -EINVAL;
 313         }
 314
 315         vc4_state->src_x = state->src_x >> 16;
 316         vc4_state->src_y = state->src_y >> 16;
 317         vc4_state->src_w[0] = state->src_w >> 16;
 318         vc4_state->src_h[0] = state->src_h >> 16;
 319
 320         vc4_state->crtc_x = state->crtc_x;
 321         vc4_state->crtc_y = state->crtc_y;
 322         vc4_state->crtc_w = state->crtc_w;
 323         vc4_state->crtc_h = state->crtc_h;
 324
 325         vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
 326                                                        vc4_state->crtc_w);
 327         vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
 328                                                        vc4_state->crtc_h);
 329
 330         if (num_planes > 1) {
 331                 vc4_state->is_yuv = true;
 332
 333                 h_subsample = drm_format_horz_chroma_subsampling(format);
 334                 v_subsample = drm_format_vert_chroma_subsampling(format);
 335                 vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample;
 336                 vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;
 337
 338                 vc4_state->x_scaling[1] =
 339                         vc4_get_scaling_mode(vc4_state->src_w[1],
 340                                              vc4_state->crtc_w);
 341                 vc4_state->y_scaling[1] =
 342                         vc4_get_scaling_mode(vc4_state->src_h[1],
 343                                              vc4_state->crtc_h);
 344
 345                 /* YUV conversion requires that scaling be enabled,
 346                  * even on a plane that's otherwise 1:1.  Choose TPZ
 347                  * for simplicity.
 348                  */
 349                 if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
 350                         vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
 351                 if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
 352                         vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
 353         }
 354
 355         vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
 356                                vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
 357                                vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
 358                                vc4_state->y_scaling[1] == VC4_SCALING_NONE);
 359
 360         /* No configuring scaling on the cursor plane, since it gets
 361            non-vblank-synced updates, and scaling requires requires
 362            LBM changes which have to be vblank-synced.
 363          */
 364         if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
 365                 return -EINVAL;
 366
 367         /* Clamp the on-screen start x/y to 0.  The hardware doesn't
 368          * support negative y, and negative x wastes bandwidth.
 369          */
 370         if (vc4_state->crtc_x < 0) {
 371                 for (i = 0; i < num_planes; i++) {
 372                         u32 cpp = fb->format->cpp[i];
 373                         u32 subs = ((i == 0) ? 1 : h_subsample);
 374
 375                         vc4_state->offsets[i] += (cpp *
 376                                                   (-vc4_state->crtc_x) / subs);
 377                 }
 378                 vc4_state->src_w[0] += vc4_state->crtc_x;
 379                 vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample;
 380                 vc4_state->crtc_x = 0;
 381         }
 382
 383         if (vc4_state->crtc_y < 0) {
 384                 for (i = 0; i < num_planes; i++) {
 385                         u32 subs = ((i == 0) ? 1 : v_subsample);
 386
 387                         vc4_state->offsets[i] += (fb->pitches[i] *
 388                                                   (-vc4_state->crtc_y) / subs);
 389                 }
 390                 vc4_state->src_h[0] += vc4_state->crtc_y;
 391                 vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample;
 392                 vc4_state->crtc_y = 0;
 393         }
 394
 395         return 0;
 396 }
 397
 398 static void vc4_write_tpz(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 399 {
 400         u32 scale, recip;
 401
 402         scale = (1 << 16) * src / dst;
 403
 404         /* The specs note that while the reciprocal would be defined
 405          * as (1<<32)/scale, ~0 is close enough.
 406          */
 407         recip = ~0 / scale;
 408
 409         vc4_dlist_write(vc4_state,
 410                         VC4_SET_FIELD(scale, SCALER_TPZ0_SCALE) |
 411                         VC4_SET_FIELD(0, SCALER_TPZ0_IPHASE));
 412         vc4_dlist_write(vc4_state,
 413                         VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP));
 414 }
 415
 416 static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 417 {
 418         u32 scale = (1 << 16) * src / dst;
 419
 420         vc4_dlist_write(vc4_state,
 421                         SCALER_PPF_AGC |
 422                         VC4_SET_FIELD(scale, SCALER_PPF_SCALE) |
 423                         VC4_SET_FIELD(0, SCALER_PPF_IPHASE));
 424 }
 425
 426 static u32 vc4_lbm_size(struct drm_plane_state *state)
 427 {
 428         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 429         /* This is the worst case number.  One of the two sizes will
 430          * be used depending on the scaling configuration.
 431          */
 432         u32 pix_per_line = max(vc4_state->src_w[0], (u32)vc4_state->crtc_w);
 433         u32 lbm;
 434
 435         if (!vc4_state->is_yuv) {
 436                 if (vc4_state->is_unity)
 437                         return 0;
 438                 else if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ)
 439                         lbm = pix_per_line * 8;
 440                 else {
 441                         /* In special cases, this multiplier might be 12. */
 442                         lbm = pix_per_line * 16;
 443                 }
 444         } else {
 445                 /* There are cases for this going down to a multiplier
 446                  * of 2, but according to the firmware source, the
 447                  * table in the docs is somewhat wrong.
 448                  */
 449                 lbm = pix_per_line * 16;
 450         }
 451
 452         lbm = roundup(lbm, 32);
 453
 454         return lbm;
 455 }
 456
 457 static void vc4_write_scaling_parameters(struct drm_plane_state *state,
 458                                          int channel)
 459 {
 460         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 461
 462         /* Ch0 H-PPF Word 0: Scaling Parameters */
 463         if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) {
 464                 vc4_write_ppf(vc4_state,
 465                               vc4_state->src_w[channel], vc4_state->crtc_w);
 466         }
 467
 468         /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */
 469         if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) {
 470                 vc4_write_ppf(vc4_state,
 471                               vc4_state->src_h[channel], vc4_state->crtc_h);
 472                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 473         }
 474
 475         /* Ch0 H-TPZ Words 0-1: Scaling Parameters, Recip */
 476         if (vc4_state->x_scaling[channel] == VC4_SCALING_TPZ) {
 477                 vc4_write_tpz(vc4_state,
 478                               vc4_state->src_w[channel], vc4_state->crtc_w);
 479         }
 480
 481         /* Ch0 V-TPZ Words 0-2: Scaling Parameters, Recip, Context */
 482         if (vc4_state->y_scaling[channel] == VC4_SCALING_TPZ) {
 483                 vc4_write_tpz(vc4_state,
 484                               vc4_state->src_h[channel], vc4_state->crtc_h);
 485                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 486         }
 487 }
 488
 489 /* Writes out a full display list for an active plane to the plane's
 490  * private dlist state.
 491  */
 492 static int vc4_plane_mode_set(struct drm_plane *plane,
 493                               struct drm_plane_state *state)
 494 {
 495         struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 496         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 497         struct drm_framebuffer *fb = state->fb;
 498         u32 ctl0_offset = vc4_state->dlist_count;
 499         const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
 500         int num_planes = drm_format_num_planes(format->drm);
 501         u32 scl0, scl1;
 502         u32 lbm_size;
 503         unsigned long irqflags;
 504         int ret, i;
 505
 506         ret = vc4_plane_setup_clipping_and_scaling(state);
 507         if (ret)
 508                 return ret;
 509
 510         /* Allocate the LBM memory that the HVS will use for temporary
 511          * storage due to our scaling/format conversion.
 512          */
 513         lbm_size = vc4_lbm_size(state);
 514         if (lbm_size) {
 515                 if (!vc4_state->lbm.allocated) {
 516                         spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
 517                         ret = drm_mm_insert_node(&vc4->hvs->lbm_mm,
 518                                                  &vc4_state->lbm,
 519                                                  lbm_size, 32, 0);
 520                         spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
 521                 } else {
 522                         WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
 523                 }
 524         }
 525
 526         if (ret)
 527                 return ret;
 528
 529         /* SCL1 is used for Cb/Cr scaling of planar formats.  For RGB
 530          * and 4:4:4, scl1 should be set to scl0 so both channels of
 531          * the scaler do the same thing.  For YUV, the Y plane needs
 532          * to be put in channel 1 and Cb/Cr in channel 0, so we swap
 533          * the scl fields here.
 534          */
 535         if (num_planes == 1) {
 536                 scl0 = vc4_get_scl_field(state, 1);
 537                 scl1 = scl0;
 538         } else {
 539                 scl0 = vc4_get_scl_field(state, 1);
 540                 scl1 = vc4_get_scl_field(state, 0);
 541         }
 542
 543         /* Control word */
 544         vc4_dlist_write(vc4_state,
 545                         SCALER_CTL0_VALID |
 546                         (format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
 547                         (format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
 548                         (vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
 549                         VC4_SET_FIELD(scl0, SCALER_CTL0_SCL0) |
 550                         VC4_SET_FIELD(scl1, SCALER_CTL0_SCL1));
 551
 552         /* Position Word 0: Image Positions and Alpha Value */
 553         vc4_state->pos0_offset = vc4_state->dlist_count;
 554         vc4_dlist_write(vc4_state,
 555                         VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
 556                         VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
 557                         VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
 558
 559         /* Position Word 1: Scaled Image Dimensions. */
 560         if (!vc4_state->is_unity) {
 561                 vc4_dlist_write(vc4_state,
 562                                 VC4_SET_FIELD(vc4_state->crtc_w,
 563                                               SCALER_POS1_SCL_WIDTH) |
 564                                 VC4_SET_FIELD(vc4_state->crtc_h,
 565                                               SCALER_POS1_SCL_HEIGHT));
 566         }
 567
 568         /* Position Word 2: Source Image Size, Alpha Mode */
 569         vc4_state->pos2_offset = vc4_state->dlist_count;
 570         vc4_dlist_write(vc4_state,
 571                         VC4_SET_FIELD(format->has_alpha ?
 572                                       SCALER_POS2_ALPHA_MODE_PIPELINE :
 573                                       SCALER_POS2_ALPHA_MODE_FIXED,
 574                                       SCALER_POS2_ALPHA_MODE) |
 575                         VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
 576                         VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
 577
 578         /* Position Word 3: Context.  Written by the HVS. */
 579         vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 580
 581
 582         /* Pointer Word 0/1/2: RGB / Y / Cb / Cr Pointers
 583          *
 584          * The pointers may be any byte address.
 585          */
 586         vc4_state->ptr0_offset = vc4_state->dlist_count;
 587         if (!format->flip_cbcr) {
 588                 for (i = 0; i < num_planes; i++)
 589                         vc4_dlist_write(vc4_state, vc4_state->offsets[i]);
 590         } else {
 591                 WARN_ON_ONCE(num_planes != 3);
 592                 vc4_dlist_write(vc4_state, vc4_state->offsets[0]);
 593                 vc4_dlist_write(vc4_state, vc4_state->offsets[2]);
 594                 vc4_dlist_write(vc4_state, vc4_state->offsets[1]);
 595         }
 596
 597         /* Pointer Context Word 0/1/2: Written by the HVS */
 598         for (i = 0; i < num_planes; i++)
 599                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 600
 601         /* Pitch word 0/1/2 */
 602         for (i = 0; i < num_planes; i++) {
 603                 vc4_dlist_write(vc4_state,
 604                                 VC4_SET_FIELD(fb->pitches[i], SCALER_SRC_PITCH));
 605         }
 606
 607         /* Colorspace conversion words */
 608         if (vc4_state->is_yuv) {
 609                 vc4_dlist_write(vc4_state, SCALER_CSC0_ITR_R_601_5);
 610                 vc4_dlist_write(vc4_state, SCALER_CSC1_ITR_R_601_5);
 611                 vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
 612         }
 613
 614         if (!vc4_state->is_unity) {
 615                 /* LBM Base Address. */
 616                 if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
 617                     vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
 618                         vc4_dlist_write(vc4_state, vc4_state->lbm.start);
 619                 }
 620
 621                 if (num_planes > 1) {
 622                         /* Emit Cb/Cr as channel 0 and Y as channel
 623                          * 1. This matches how we set up scl0/scl1
 624                          * above.
 625                          */
 626                         vc4_write_scaling_parameters(state, 1);
 627                 }
 628                 vc4_write_scaling_parameters(state, 0);
 629
 630                 /* If any PPF setup was done, then all the kernel
 631                  * pointers get uploaded.
 632                  */
 633                 if (vc4_state->x_scaling[0] == VC4_SCALING_PPF ||
 634                     vc4_state->y_scaling[0] == VC4_SCALING_PPF ||
 635                     vc4_state->x_scaling[1] == VC4_SCALING_PPF ||
 636                     vc4_state->y_scaling[1] == VC4_SCALING_PPF) {
 637                         u32 kernel = VC4_SET_FIELD(vc4->hvs->mitchell_netravali_filter.start,
 638                                                    SCALER_PPF_KERNEL_OFFSET);
 639
 640                         /* HPPF plane 0 */
 641                         vc4_dlist_write(vc4_state, kernel);
 642                         /* VPPF plane 0 */
 643                         vc4_dlist_write(vc4_state, kernel);
 644                         /* HPPF plane 1 */
 645                         vc4_dlist_write(vc4_state, kernel);
 646                         /* VPPF plane 1 */
 647                         vc4_dlist_write(vc4_state, kernel);
 648                 }
 649         }
 650
 651         vc4_state->dlist[ctl0_offset] |=
 652                 VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
 653
 654         return 0;
 655 }
 656
 657 /* If a modeset involves changing the setup of a plane, the atomic
 658  * infrastructure will call this to validate a proposed plane setup.
 659  * However, if a plane isn't getting updated, this (and the
 660  * corresponding vc4_plane_atomic_update) won't get called.  Thus, we
 661  * compute the dlist here and have all active plane dlists get updated
 662  * in the CRTC's flush.
 663  */
 664 static int vc4_plane_atomic_check(struct drm_plane *plane,
 665                                   struct drm_plane_state *state)
 666 {
 667         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 668
 669         vc4_state->dlist_count = 0;
 670
 671         if (plane_enabled(state))
 672                 return vc4_plane_mode_set(plane, state);
 673         else
 674                 return 0;
 675 }
 676
 677 static void vc4_plane_atomic_update(struct drm_plane *plane,
 678                                     struct drm_plane_state *old_state)
 679 {
 680         /* No contents here.  Since we don't know where in the CRTC's
 681          * dlist we should be stored, our dlist is uploaded to the
 682          * hardware with vc4_plane_write_dlist() at CRTC atomic_flush
 683          * time.
 684          */
 685 }
 686
 687 u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
 688 {
 689         struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 690         int i;
 691
 692         vc4_state->hw_dlist = dlist;
 693
 694         /* Can't memcpy_toio() because it needs to be 32-bit writes. */
 695         for (i = 0; i < vc4_state->dlist_count; i++)
 696                 writel(vc4_state->dlist[i], &dlist[i]);
 697
 698         return vc4_state->dlist_count;
 699 }
 700
 701 u32 vc4_plane_dlist_size(const struct drm_plane_state *state)
 702 {
 703         const struct vc4_plane_state *vc4_state =
 704                 container_of(state, typeof(*vc4_state), base);
 705
 706         return vc4_state->dlist_count;
 707 }
 708
 709 /* Updates the plane to immediately (well, once the FIFO needs
 710  * refilling) scan out from at a new framebuffer.
 711  */
 712 void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 713 {
 714         struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 715         struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 716         uint32_t addr;
 717
 718         /* We're skipping the address adjustment for negative origin,
 719          * because this is only called on the primary plane.
 720          */
 721         WARN_ON_ONCE(plane->state->crtc_x < 0 || plane->state->crtc_y < 0);
 722         addr = bo->paddr + fb->offsets[0];
 723
 724         /* Write the new address into the hardware immediately.  The
 725          * scanout will start from this address as soon as the FIFO
 726          * needs to refill with pixels.
 727          */
 728         writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 729
 730         /* Also update the CPU-side dlist copy, so that any later
 731          * atomic updates that don't do a new modeset on our plane
 732          * also use our updated address.
 733          */
 734         vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 735 }
 736
 737 static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
 738         .atomic_check = vc4_plane_atomic_check,
 739         .atomic_update = vc4_plane_atomic_update,
 740 };
 741
 742 static void vc4_plane_destroy(struct drm_plane *plane)
 743 {
 744         drm_plane_helper_disable(plane);
 745         drm_plane_cleanup(plane);
 746 }
 747
 748 /* Implements immediate (non-vblank-synced) updates of the cursor
 749  * position, or falls back to the atomic helper otherwise.
 750  */
 751 static int
 752 vc4_update_plane(struct drm_plane *plane,
 753                  struct drm_crtc *crtc,
 754                  struct drm_framebuffer *fb,
 755                  int crtc_x, int crtc_y,
 756                  unsigned int crtc_w, unsigned int crtc_h,
 757                  uint32_t src_x, uint32_t src_y,
 758                  uint32_t src_w, uint32_t src_h)
 759 {
 760         struct drm_plane_state *plane_state;
 761         struct vc4_plane_state *vc4_state;
 762
 763         if (plane != crtc->cursor)
 764                 goto out;
 765
 766         plane_state = plane->state;
 767         vc4_state = to_vc4_plane_state(plane_state);
 768
 769         if (!plane_state)
 770                 goto out;
 771
 772         /* If we're changing the cursor contents, do that in the
 773          * normal vblank-synced atomic path.
 774          */
 775         if (fb != plane_state->fb)
 776                 goto out;
 777
 778         /* No configuring new scaling in the fast path. */
 779         if (crtc_w != plane_state->crtc_w ||
 780             crtc_h != plane_state->crtc_h ||
 781             src_w != plane_state->src_w ||
 782             src_h != plane_state->src_h) {
 783                 goto out;
 784         }
 785
 786         /* Set the cursor's position on the screen.  This is the
 787          * expected change from the drm_mode_cursor_universal()
 788          * helper.
 789          */
 790         plane_state->crtc_x = crtc_x;
 791         plane_state->crtc_y = crtc_y;
 792
 793         /* Allow changing the start position within the cursor BO, if
 794          * that matters.
 795          */
 796         plane_state->src_x = src_x;
 797         plane_state->src_y = src_y;
 798
 799         /* Update the display list based on the new crtc_x/y. */
 800         vc4_plane_atomic_check(plane, plane_state);
 801
 802         /* Note that we can't just call vc4_plane_write_dlist()
 803          * because that would smash the context data that the HVS is
 804          * currently using.
 805          */
 806         writel(vc4_state->dlist[vc4_state->pos0_offset],
 807                &vc4_state->hw_dlist[vc4_state->pos0_offset]);
 808         writel(vc4_state->dlist[vc4_state->pos2_offset],
 809                &vc4_state->hw_dlist[vc4_state->pos2_offset]);
 810         writel(vc4_state->dlist[vc4_state->ptr0_offset],
 811                &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 812
 813         return 0;
 814
 815 out:
 816         return drm_atomic_helper_update_plane(plane, crtc, fb,
 817                                               crtc_x, crtc_y,
 818                                               crtc_w, crtc_h,
 819                                               src_x, src_y,
 820                                               src_w, src_h);
 821 }
 822
 823 static const struct drm_plane_funcs vc4_plane_funcs = {
 824         .update_plane = vc4_update_plane,
 825         .disable_plane = drm_atomic_helper_disable_plane,
 826         .destroy = vc4_plane_destroy,
 827         .set_property = NULL,
 828         .reset = vc4_plane_reset,
 829         .atomic_duplicate_state = vc4_plane_duplicate_state,
 830         .atomic_destroy_state = vc4_plane_destroy_state,
 831 };
 832
 833 struct drm_plane *vc4_plane_init(struct drm_device *dev,
 834                                  enum drm_plane_type type)
 835 {
 836         struct drm_plane *plane = NULL;
 837         struct vc4_plane *vc4_plane;
 838         u32 formats[ARRAY_SIZE(hvs_formats)];
 839         u32 num_formats = 0;
 840         int ret = 0;
 841         unsigned i;
 842
 843         vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane),
 844                                  GFP_KERNEL);
 845         if (!vc4_plane) {
 846                 ret = -ENOMEM;
 847                 goto fail;
 848         }
 849
 850         for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
 851                 /* Don't allow YUV in cursor planes, since that means
 852                  * tuning on the scaler, which we don't allow for the
 853                  * cursor.
 854                  */
 855                 if (type != DRM_PLANE_TYPE_CURSOR ||
 856                     hvs_formats[i].hvs < HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE) {
 857                         formats[num_formats++] = hvs_formats[i].drm;
 858                 }
 859         }
 860         plane = &vc4_plane->base;
 861         ret = drm_universal_plane_init(dev, plane, 0xff,
 862                                        &vc4_plane_funcs,
 863                                        formats, num_formats,
 864                                        type, NULL);
 865
 866         drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
 867
 868         return plane;
 869 fail:
 870         if (plane)
 871                 vc4_plane_destroy(plane);
 872
 873         return ERR_PTR(ret);
 874 }