2 * Synopsys DesignWare I2C adapter driver (master only).
4 * Based on the TI DAVINCI I2C adapter driver.
6 * Copyright (C) 2006 Texas Instruments.
7 * Copyright (C) 2007 MontaVista Software Inc.
8 * Copyright (C) 2009 Provigent Ltd.
10 * ----------------------------------------------------------------------------
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 * ----------------------------------------------------------------------------
25 #include <linux/i2c.h>
27 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
28 I2C_FUNC_SMBUS_BYTE | \
29 I2C_FUNC_SMBUS_BYTE_DATA | \
30 I2C_FUNC_SMBUS_WORD_DATA | \
31 I2C_FUNC_SMBUS_BLOCK_DATA | \
32 I2C_FUNC_SMBUS_I2C_BLOCK)
34 #define DW_IC_CON_MASTER 0x1
35 #define DW_IC_CON_SPEED_STD 0x2
36 #define DW_IC_CON_SPEED_FAST 0x4
37 #define DW_IC_CON_SPEED_HIGH 0x6
38 #define DW_IC_CON_SPEED_MASK 0x6
39 #define DW_IC_CON_10BITADDR_MASTER 0x10
40 #define DW_IC_CON_RESTART_EN 0x20
41 #define DW_IC_CON_SLAVE_DISABLE 0x40
45 * struct dw_i2c_dev - private i2c-designware data
46 * @dev: driver model device node
47 * @base: IO registers pointer
48 * @cmd_complete: tx completion indicator
49 * @clk: input reference clock
50 * @cmd_err: run time hadware error code
51 * @msgs: points to an array of messages currently being transfered
52 * @msgs_num: the number of elements in msgs
53 * @msg_write_idx: the element index of the current tx message in the msgs
55 * @tx_buf_len: the length of the current tx buffer
56 * @tx_buf: the current tx buffer
57 * @msg_read_idx: the element index of the current rx message in the msgs
59 * @rx_buf_len: the length of the current rx buffer
60 * @rx_buf: the current rx buffer
61 * @msg_err: error status of the current transfer
62 * @status: i2c master status, one of STATUS_*
63 * @abort_source: copy of the TX_ABRT_SOURCE register
64 * @irq: interrupt number for the i2c master
65 * @adapter: i2c subsystem adapter node
66 * @tx_fifo_depth: depth of the hardware tx fifo
67 * @rx_fifo_depth: depth of the hardware rx fifo
68 * @rx_outstanding: current master-rx elements in tx fifo
69 * @clk_freq: bus clock frequency
70 * @ss_hcnt: standard speed HCNT value
71 * @ss_lcnt: standard speed LCNT value
72 * @fs_hcnt: fast speed HCNT value
73 * @fs_lcnt: fast speed LCNT value
74 * @fp_hcnt: fast plus HCNT value
75 * @fp_lcnt: fast plus LCNT value
76 * @hs_hcnt: high speed HCNT value
77 * @hs_lcnt: high speed LCNT value
78 * @acquire_lock: function to acquire a hardware lock on the bus
79 * @release_lock: function to release a hardware lock on the bus
80 * @pm_runtime_disabled: true if pm runtime is disabled
82 * HCNT and LCNT parameters can be used if the platform knows more accurate
83 * values than the one computed based only on the input clock frequency.
84 * Leave them to be %0 if not used.
89 struct completion cmd_complete
;
91 u32 (*get_clk_rate_khz
) (struct dw_i2c_dev
*dev
);
92 struct dw_pci_controller
*controller
;
107 struct i2c_adapter adapter
;
110 unsigned int tx_fifo_depth
;
111 unsigned int rx_fifo_depth
;
115 u32 sda_falling_time
;
116 u32 scl_falling_time
;
125 int (*acquire_lock
)(struct dw_i2c_dev
*dev
);
126 void (*release_lock
)(struct dw_i2c_dev
*dev
);
127 bool pm_runtime_disabled
;
128 bool dynamic_tar_update_enabled
;
131 #define ACCESS_SWAP 0x00000001
132 #define ACCESS_16BIT 0x00000002
133 #define ACCESS_INTR_MASK 0x00000004
135 extern int i2c_dw_init(struct dw_i2c_dev
*dev
);
136 extern void i2c_dw_disable(struct dw_i2c_dev
*dev
);
137 extern void i2c_dw_disable_int(struct dw_i2c_dev
*dev
);
138 extern u32
i2c_dw_read_comp_param(struct dw_i2c_dev
*dev
);
139 extern int i2c_dw_probe(struct dw_i2c_dev
*dev
);
141 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
142 extern int i2c_dw_eval_lock_support(struct dw_i2c_dev
*dev
);
144 static inline int i2c_dw_eval_lock_support(struct dw_i2c_dev
*dev
) { return 0; }