drivers/regulator/anatop-regulator.c

   1 /*
   2  * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
   3  */
   4
   5 /*
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15
  16  * You should have received a copy of the GNU General Public License along
  17  * with this program; if not, write to the Free Software Foundation, Inc.,
  18  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  19  */
  20
  21 #include <linux/slab.h>
  22 #include <linux/device.h>
  23 #include <linux/module.h>
  24 #include <linux/mfd/syscon.h>
  25 #include <linux/err.h>
  26 #include <linux/io.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/of.h>
  29 #include <linux/of_address.h>
  30 #include <linux/regmap.h>
  31 #include <linux/regulator/driver.h>
  32 #include <linux/regulator/of_regulator.h>
  33 #include <linux/regulator/machine.h>
  34
  35 #define LDO_RAMP_UP_UNIT_IN_CYCLES      64 /* 64 cycles per step */
  36 #define LDO_RAMP_UP_FREQ_IN_MHZ         24 /* cycle based on 24M OSC */
  37
  38 #define LDO_POWER_GATE                  0x00
  39 #define LDO_FET_FULL_ON                 0x1f
  40
  41 struct anatop_regulator {
  42         u32 control_reg;
  43         struct regmap *anatop;
  44         int vol_bit_shift;
  45         int vol_bit_width;
  46         u32 delay_reg;
  47         int delay_bit_shift;
  48         int delay_bit_width;
  49         int min_bit_val;
  50         int min_voltage;
  51         int max_voltage;
  52         struct regulator_desc rdesc;
  53         struct regulator_init_data *initdata;
  54         bool bypass;
  55         int sel;
  56 };
  57
  58 static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg,
  59         unsigned int old_sel,
  60         unsigned int new_sel)
  61 {
  62         struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
  63         u32 val;
  64         int ret = 0;
  65
  66         /* check whether need to care about LDO ramp up speed */
  67         if (anatop_reg->delay_bit_width && new_sel > old_sel) {
  68                 /*
  69                  * the delay for LDO ramp up time is
  70                  * based on the register setting, we need
  71                  * to calculate how many steps LDO need to
  72                  * ramp up, and how much delay needed. (us)
  73                  */
  74                 regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val);
  75                 val = (val >> anatop_reg->delay_bit_shift) &
  76                         ((1 << anatop_reg->delay_bit_width) - 1);
  77                 ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES <<
  78                         val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1;
  79         }
  80
  81         return ret;
  82 }
  83
  84 static int anatop_regmap_enable(struct regulator_dev *reg)
  85 {
  86         struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
  87         int sel;
  88
  89         sel = anatop_reg->bypass ? LDO_FET_FULL_ON : anatop_reg->sel;
  90         return regulator_set_voltage_sel_regmap(reg, sel);
  91 }
  92
  93 static int anatop_regmap_disable(struct regulator_dev *reg)
  94 {
  95         return regulator_set_voltage_sel_regmap(reg, LDO_POWER_GATE);
  96 }
  97
  98 static int anatop_regmap_is_enabled(struct regulator_dev *reg)
  99 {
 100         return regulator_get_voltage_sel_regmap(reg) != LDO_POWER_GATE;
 101 }
 102
 103 static int anatop_regmap_core_set_voltage_sel(struct regulator_dev *reg,
 104                                               unsigned selector)
 105 {
 106         struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
 107         int ret;
 108
 109         if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) {
 110                 anatop_reg->sel = selector;
 111                 return 0;
 112         }
 113
 114         ret = regulator_set_voltage_sel_regmap(reg, selector);
 115         if (!ret)
 116                 anatop_reg->sel = selector;
 117         return ret;
 118 }
 119
 120 static int anatop_regmap_core_get_voltage_sel(struct regulator_dev *reg)
 121 {
 122         struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
 123
 124         if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg))
 125                 return anatop_reg->sel;
 126
 127         return regulator_get_voltage_sel_regmap(reg);
 128 }
 129
 130 static int anatop_regmap_get_bypass(struct regulator_dev *reg, bool *enable)
 131 {
 132         struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
 133         int sel;
 134
 135         sel = regulator_get_voltage_sel_regmap(reg);
 136         if (sel == LDO_FET_FULL_ON)
 137                 WARN_ON(!anatop_reg->bypass);
 138         else if (sel != LDO_POWER_GATE)
 139                 WARN_ON(anatop_reg->bypass);
 140
 141         *enable = anatop_reg->bypass;
 142         return 0;
 143 }
 144
 145 static int anatop_regmap_set_bypass(struct regulator_dev *reg, bool enable)
 146 {
 147         struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
 148         int sel;
 149
 150         if (enable == anatop_reg->bypass)
 151                 return 0;
 152
 153         sel = enable ? LDO_FET_FULL_ON : anatop_reg->sel;
 154         anatop_reg->bypass = enable;
 155
 156         return regulator_set_voltage_sel_regmap(reg, sel);
 157 }
 158
 159 static struct regulator_ops anatop_rops = {
 160         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 161         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 162         .list_voltage = regulator_list_voltage_linear,
 163         .map_voltage = regulator_map_voltage_linear,
 164 };
 165
 166 static struct regulator_ops anatop_core_rops = {
 167         .enable = anatop_regmap_enable,
 168         .disable = anatop_regmap_disable,
 169         .is_enabled = anatop_regmap_is_enabled,
 170         .set_voltage_sel = anatop_regmap_core_set_voltage_sel,
 171         .set_voltage_time_sel = anatop_regmap_set_voltage_time_sel,
 172         .get_voltage_sel = anatop_regmap_core_get_voltage_sel,
 173         .list_voltage = regulator_list_voltage_linear,
 174         .map_voltage = regulator_map_voltage_linear,
 175         .get_bypass = anatop_regmap_get_bypass,
 176         .set_bypass = anatop_regmap_set_bypass,
 177 };
 178
 179 static int anatop_regulator_probe(struct platform_device *pdev)
 180 {
 181         struct device *dev = &pdev->dev;
 182         struct device_node *np = dev->of_node;
 183         struct device_node *anatop_np;
 184         struct regulator_desc *rdesc;
 185         struct regulator_dev *rdev;
 186         struct anatop_regulator *sreg;
 187         struct regulator_init_data *initdata;
 188         struct regulator_config config = { };
 189         int ret = 0;
 190         u32 val;
 191
 192         sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
 193         if (!sreg)
 194                 return -ENOMEM;
 195
 196         rdesc = &sreg->rdesc;
 197         rdesc->type = REGULATOR_VOLTAGE;
 198         rdesc->owner = THIS_MODULE;
 199
 200         of_property_read_string(np, "regulator-name", &rdesc->name);
 201         if (!rdesc->name) {
 202                 dev_err(dev, "failed to get a regulator-name\n");
 203                 return -EINVAL;
 204         }
 205
 206         initdata = of_get_regulator_init_data(dev, np, rdesc);
 207         if (!initdata)
 208                 return -ENOMEM;
 209
 210         initdata->supply_regulator = "vin";
 211         sreg->initdata = initdata;
 212
 213         anatop_np = of_get_parent(np);
 214         if (!anatop_np)
 215                 return -ENODEV;
 216         sreg->anatop = syscon_node_to_regmap(anatop_np);
 217         of_node_put(anatop_np);
 218         if (IS_ERR(sreg->anatop))
 219                 return PTR_ERR(sreg->anatop);
 220
 221         ret = of_property_read_u32(np, "anatop-reg-offset",
 222                                    &sreg->control_reg);
 223         if (ret) {
 224                 dev_err(dev, "no anatop-reg-offset property set\n");
 225                 return ret;
 226         }
 227         ret = of_property_read_u32(np, "anatop-vol-bit-width",
 228                                    &sreg->vol_bit_width);
 229         if (ret) {
 230                 dev_err(dev, "no anatop-vol-bit-width property set\n");
 231                 return ret;
 232         }
 233         ret = of_property_read_u32(np, "anatop-vol-bit-shift",
 234                                    &sreg->vol_bit_shift);
 235         if (ret) {
 236                 dev_err(dev, "no anatop-vol-bit-shift property set\n");
 237                 return ret;
 238         }
 239         ret = of_property_read_u32(np, "anatop-min-bit-val",
 240                                    &sreg->min_bit_val);
 241         if (ret) {
 242                 dev_err(dev, "no anatop-min-bit-val property set\n");
 243                 return ret;
 244         }
 245         ret = of_property_read_u32(np, "anatop-min-voltage",
 246                                    &sreg->min_voltage);
 247         if (ret) {
 248                 dev_err(dev, "no anatop-min-voltage property set\n");
 249                 return ret;
 250         }
 251         ret = of_property_read_u32(np, "anatop-max-voltage",
 252                                    &sreg->max_voltage);
 253         if (ret) {
 254                 dev_err(dev, "no anatop-max-voltage property set\n");
 255                 return ret;
 256         }
 257
 258         /* read LDO ramp up setting, only for core reg */
 259         of_property_read_u32(np, "anatop-delay-reg-offset",
 260                              &sreg->delay_reg);
 261         of_property_read_u32(np, "anatop-delay-bit-width",
 262                              &sreg->delay_bit_width);
 263         of_property_read_u32(np, "anatop-delay-bit-shift",
 264                              &sreg->delay_bit_shift);
 265
 266         rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
 267                             + sreg->min_bit_val;
 268         rdesc->min_uV = sreg->min_voltage;
 269         rdesc->uV_step = 25000;
 270         rdesc->linear_min_sel = sreg->min_bit_val;
 271         rdesc->vsel_reg = sreg->control_reg;
 272         rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
 273                            sreg->vol_bit_shift;
 274         rdesc->min_dropout_uV = 125000;
 275
 276         config.dev = &pdev->dev;
 277         config.init_data = initdata;
 278         config.driver_data = sreg;
 279         config.of_node = pdev->dev.of_node;
 280         config.regmap = sreg->anatop;
 281
 282         /* Only core regulators have the ramp up delay configuration. */
 283         if (sreg->control_reg && sreg->delay_bit_width) {
 284                 rdesc->ops = &anatop_core_rops;
 285
 286                 ret = regmap_read(config.regmap, rdesc->vsel_reg, &val);
 287                 if (ret) {
 288                         dev_err(dev, "failed to read initial state\n");
 289                         return ret;
 290                 }
 291
 292                 sreg->sel = (val & rdesc->vsel_mask) >> sreg->vol_bit_shift;
 293                 if (sreg->sel == LDO_FET_FULL_ON) {
 294                         sreg->sel = 0;
 295                         sreg->bypass = true;
 296                 }
 297
 298                 /*
 299                  * In case vddpu was disabled by the bootloader, we need to set
 300                  * a sane default until imx6-cpufreq was probed and changes the
 301                  * voltage to the correct value. In this case we set 1.25V.
 302                  */
 303                 if (!sreg->sel && !strcmp(rdesc->name, "vddpu"))
 304                         sreg->sel = 22;
 305
 306                 /* set the default voltage of the pcie phy to be 1.100v */
 307                 if (!sreg->sel && !strcmp(rdesc->name, "vddpcie"))
 308                         sreg->sel = 0x10;
 309
 310                 if (!sreg->bypass && !sreg->sel) {
 311                         dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 312                         return -EINVAL;
 313                 }
 314         } else {
 315                 u32 enable_bit;
 316
 317                 rdesc->ops = &anatop_rops;
 318
 319                 if (!of_property_read_u32(np, "anatop-enable-bit",
 320                                           &enable_bit)) {
 321                         anatop_rops.enable  = regulator_enable_regmap;
 322                         anatop_rops.disable = regulator_disable_regmap;
 323                         anatop_rops.is_enabled = regulator_is_enabled_regmap;
 324
 325                         rdesc->enable_reg = sreg->control_reg;
 326                         rdesc->enable_mask = BIT(enable_bit);
 327                 }
 328         }
 329
 330         /* register regulator */
 331         rdev = devm_regulator_register(dev, rdesc, &config);
 332         if (IS_ERR(rdev)) {
 333                 dev_err(dev, "failed to register %s\n",
 334                         rdesc->name);
 335                 return PTR_ERR(rdev);
 336         }
 337
 338         platform_set_drvdata(pdev, rdev);
 339
 340         return 0;
 341 }
 342
 343 static const struct of_device_id of_anatop_regulator_match_tbl[] = {
 344         { .compatible = "fsl,anatop-regulator", },
 345         { /* end */ }
 346 };
 347 MODULE_DEVICE_TABLE(of, of_anatop_regulator_match_tbl);
 348
 349 static struct platform_driver anatop_regulator_driver = {
 350         .driver = {
 351                 .name   = "anatop_regulator",
 352                 .of_match_table = of_anatop_regulator_match_tbl,
 353         },
 354         .probe  = anatop_regulator_probe,
 355 };
 356
 357 static int __init anatop_regulator_init(void)
 358 {
 359         return platform_driver_register(&anatop_regulator_driver);
 360 }
 361 postcore_initcall(anatop_regulator_init);
 362
 363 static void __exit anatop_regulator_exit(void)
 364 {
 365         platform_driver_unregister(&anatop_regulator_driver);
 366 }
 367 module_exit(anatop_regulator_exit);
 368
 369 MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>");
 370 MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
 371 MODULE_DESCRIPTION("ANATOP Regulator driver");
 372 MODULE_LICENSE("GPL v2");
 373 MODULE_ALIAS("platform:anatop_regulator");