arch/powerpc/boot/dts/pcm030.dts

   1 /*
   2  * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
   3  *
   4  * Copyright 2006 Pengutronix
   5  * Sascha Hauer <s.hauer@pengutronix.de>
   6  * Copyright 2007 Pengutronix
   7  * Juergen Beisert <j.beisert@pengutronix.de>
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 /include/ "mpc5200b.dtsi"
  16
  17 &gpt0 { fsl,has-wdt; };
  18 &gpt2 { gpio-controller; };
  19 &gpt3 { gpio-controller; };
  20 &gpt4 { gpio-controller; };
  21 &gpt5 { gpio-controller; };
  22 &gpt6 { gpio-controller; };
  23 &gpt7 { gpio-controller; };
  24
  25 / {
  26         model = "phytec,pcm030";
  27         compatible = "phytec,pcm030";
  28
  29         soc5200@f0000000 {
  30                 audioplatform: psc@2000 { /* PSC1 in ac97 mode */
  31                         compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
  32                         cell-index = <0>;
  33                 };
  34
  35                 /* PSC2 port is used by CAN1/2 */
  36                 psc@2200 {
  37                         status = "disabled";
  38                 };
  39
  40                 psc@2400 { /* PSC3 in UART mode */
  41                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  42                 };
  43
  44                 /* PSC4 is ??? */
  45                 psc@2600 {
  46                         status = "disabled";
  47                 };
  48
  49                 /* PSC5 is ??? */
  50                 psc@2800 {
  51                         status = "disabled";
  52                 };
  53
  54                 psc@2c00 { /* PSC6 in UART mode */
  55                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  56                 };
  57
  58                 ethernet@3000 {
  59                         phy-handle = <&phy0>;
  60                 };
  61
  62                 mdio@3000 {
  63                         phy0: ethernet-phy@0 {
  64                                 reg = <0>;
  65                         };
  66                 };
  67
  68                 i2c@3d40 {
  69                         rtc@51 {
  70                                 compatible = "nxp,pcf8563";
  71                                 reg = <0x51>;
  72                         };
  73                         eeprom@52 {
  74                                 compatible = "catalyst,24c32", "atmel,24c32";
  75                                 reg = <0x52>;
  76                                 pagesize = <32>;
  77                         };
  78                 };
  79
  80                 sram@8000 {
  81                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
  82                         reg = <0x8000 0x4000>;
  83                 };
  84         };
  85
  86         pci@f0000d00 {
  87                 interrupt-map-mask = <0xf800 0 0 7>;
  88                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
  89                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
  90                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
  91                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
  92
  93                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
  94                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
  95                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
  96                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
  97                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
  98                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
  99                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 100         };
 101
 102         localbus {
 103                 status = "disabled";
 104         };
 105
 106         sound {
 107                 compatible = "phytec,pcm030-audio-fabric";
 108                 asoc-platform = <&audioplatform>;
 109         };
 110 };