1 // SPDX-License-Identifier: GPL-2.0
3 * linux/arch/alpha/kernel/sys_rx164.c
5 * Copyright (C) 1995 David A Rusling
6 * Copyright (C) 1996 Jay A Estabrook
7 * Copyright (C) 1998, 1999 Richard Henderson
9 * Code supporting the RX164 (PCA56+POLARIS).
12 #include <linux/kernel.h>
13 #include <linux/types.h>
15 #include <linux/sched.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/bitops.h>
20 #include <asm/ptrace.h>
23 #include <asm/mmu_context.h>
25 #include <asm/pgtable.h>
26 #include <asm/core_polaris.h>
27 #include <asm/tlbflush.h>
32 #include "machvec_impl.h"
35 /* Note mask bit is true for ENABLED irqs. */
36 static unsigned long cached_irq_mask
;
39 rx164_update_irq_hw(unsigned long mask
)
41 volatile unsigned int *irq_mask
;
43 irq_mask
= (void *)(POLARIS_DENSE_CONFIG_BASE
+ 0x74);
50 rx164_enable_irq(struct irq_data
*d
)
52 rx164_update_irq_hw(cached_irq_mask
|= 1UL << (d
->irq
- 16));
56 rx164_disable_irq(struct irq_data
*d
)
58 rx164_update_irq_hw(cached_irq_mask
&= ~(1UL << (d
->irq
- 16)));
61 static struct irq_chip rx164_irq_type
= {
63 .irq_unmask
= rx164_enable_irq
,
64 .irq_mask
= rx164_disable_irq
,
65 .irq_mask_ack
= rx164_disable_irq
,
69 rx164_device_interrupt(unsigned long vector
)
72 volatile unsigned int *dirr
;
75 /* Read the interrupt summary register. On Polaris, this is
76 the DIRR register in PCI config space (offset 0x84). */
77 dirr
= (void *)(POLARIS_DENSE_CONFIG_BASE
+ 0x84);
81 * Now for every possible bit set, work through them and call
82 * the appropriate interrupt handler.
86 pld
&= pld
- 1; /* clear least bit set */
88 isa_no_iack_sc_device_interrupt(vector
);
100 rx164_update_irq_hw(0);
101 for (i
= 16; i
< 40; ++i
) {
102 irq_set_chip_and_handler(i
, &rx164_irq_type
, handle_level_irq
);
103 irq_set_status_flags(i
, IRQ_LEVEL
);
107 common_init_isa_dma();
109 setup_irq(16+20, &isa_cascade_irqaction
);
114 * The RX164 changed its interrupt routing between pass1 and pass2...
118 * Slot IDSEL INTA INTB INTC INTD
126 * Slot IDSEL INTA INTB INTC INTD
137 * 5 32 bit PCI option slot 0
138 * 6 64 bit PCI option slot 1
140 * 7 64 bit PCI option slot 2
141 * 9 32 bit PCI option slot 3
147 rx164_map_irq(const struct pci_dev
*dev
, u8 slot
, u8 pin
)
150 static char irq_tab_pass1
[6][5] __initdata
= {
151 /*INT INTA INTB INTC INTD */
152 { 16+3, 16+3, 16+8, 16+13, 16+18}, /* IdSel 5, slot 2 */
153 { 16+5, 16+5, 16+10, 16+15, 16+20}, /* IdSel 6, slot 0 */
154 { 16+4, 16+4, 16+9, 16+14, 16+19}, /* IdSel 7, slot 1 */
155 { -1, -1, -1, -1, -1}, /* IdSel 8, PCI/ISA bridge */
156 { 16+2, 16+2, 16+7, 16+12, 16+17}, /* IdSel 9, slot 3 */
157 { 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */
160 static char irq_tab
[6][5] = {
161 /*INT INTA INTB INTC INTD */
162 { 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */
163 { 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */
164 { -1, -1, -1, -1, -1}, /* IdSel 7, PCI/ISA bridge */
165 { 16+2, 16+2, 16+8, 16+13, 16+18}, /* IdSel 8, slot 2 */
166 { 16+3, 16+3, 16+9, 16+14, 16+19}, /* IdSel 9, slot 3 */
167 { 16+4, 16+4, 16+10, 16+15, 16+5}, /* IdSel 10, PCI-PCI */
170 const long min_idsel
= 5, max_idsel
= 10, irqs_per_slot
= 5;
172 /* JRP - Need to figure out how to distinguish pass1 from pass2,
173 and use the correct table. */
174 return COMMON_TABLE_LOOKUP
;
182 struct alpha_machine_vector rx164_mv __initmv
= {
183 .vector_name
= "RX164",
187 .machine_check
= polaris_machine_check
,
188 .max_isa_dma_address
= ALPHA_MAX_ISA_DMA_ADDRESS
,
189 .min_io_address
= DEFAULT_IO_BASE
,
190 .min_mem_address
= DEFAULT_MEM_BASE
,
193 .device_interrupt
= rx164_device_interrupt
,
195 .init_arch
= polaris_init_arch
,
196 .init_irq
= rx164_init_irq
,
197 .init_rtc
= common_init_rtc
,
198 .init_pci
= common_init_pci
,
200 .pci_map_irq
= rx164_map_irq
,
201 .pci_swizzle
= common_swizzle
,