1 // SPDX-License-Identifier: GPL-2.0
3 // Copyright (C) 2015 Freescale Semiconductor, Inc.
5 #include "imx6sx-sdb.dtsi"
8 model = "Freescale i.MX6 SoloX SDB RevA Board";
12 clock-frequency = <100000>;
13 pinctrl-names = "default";
14 pinctrl-0 = <&pinctrl_i2c1>;
18 compatible = "fsl,pfuze100";
23 regulator-min-microvolt = <300000>;
24 regulator-max-microvolt = <1875000>;
27 regulator-ramp-delay = <6250>;
31 regulator-min-microvolt = <300000>;
32 regulator-max-microvolt = <1875000>;
35 regulator-ramp-delay = <6250>;
39 regulator-min-microvolt = <800000>;
40 regulator-max-microvolt = <3300000>;
46 regulator-min-microvolt = <400000>;
47 regulator-max-microvolt = <1975000>;
53 regulator-min-microvolt = <400000>;
54 regulator-max-microvolt = <1975000>;
60 regulator-min-microvolt = <800000>;
61 regulator-max-microvolt = <3300000>;
66 regulator-min-microvolt = <5000000>;
67 regulator-max-microvolt = <5150000>;
71 regulator-min-microvolt = <1000000>;
72 regulator-max-microvolt = <3000000>;
83 regulator-min-microvolt = <800000>;
84 regulator-max-microvolt = <1550000>;
89 regulator-min-microvolt = <800000>;
90 regulator-max-microvolt = <1550000>;
94 regulator-min-microvolt = <1800000>;
95 regulator-max-microvolt = <3300000>;
100 regulator-min-microvolt = <1800000>;
101 regulator-max-microvolt = <3300000>;
106 regulator-min-microvolt = <1800000>;
107 regulator-max-microvolt = <3300000>;
112 regulator-min-microvolt = <1800000>;
113 regulator-max-microvolt = <3300000>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pinctrl_qspi2>;
125 flash0: s25fl128s@0 {
127 #address-cells = <1>;
129 compatible = "spansion,s25fl128s", "jedec,spi-nor";
130 spi-max-frequency = <66000000>;
131 spi-rx-bus-width = <4>;
132 spi-tx-bus-width = <4>;
135 flash1: s25fl128s@2 {
137 #address-cells = <1>;
139 compatible = "spansion,s25fl128s", "jedec,spi-nor";
140 spi-max-frequency = <66000000>;
141 spi-rx-bus-width = <4>;
142 spi-tx-bus-width = <4>;
147 /* Transceiver EN/STBY is active high on RevA board */
148 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
153 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
155 vin-supply = <®_can_en>;
159 vin-supply = <&vgen6_reg>;
163 vin-supply = <&vgen6_reg>;