arch/arm/boot/dts/omap5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   4  *
   5  * Based on "omap4.dtsi"
   6  */
   7
   8 #include <dt-bindings/bus/ti-sysc.h>
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/pinctrl/omap.h>
  12 #include <dt-bindings/clock/omap5.h>
  13
  14 / {
  15         #address-cells = <2>;
  16         #size-cells = <2>;
  17
  18         compatible = "ti,omap5";
  19         interrupt-parent = <&wakeupgen>;
  20         chosen { };
  21
  22         aliases {
  23                 i2c0 = &i2c1;
  24                 i2c1 = &i2c2;
  25                 i2c2 = &i2c3;
  26                 i2c3 = &i2c4;
  27                 i2c4 = &i2c5;
  28                 serial0 = &uart1;
  29                 serial1 = &uart2;
  30                 serial2 = &uart3;
  31                 serial3 = &uart4;
  32                 serial4 = &uart5;
  33                 serial5 = &uart6;
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39
  40                 cpu0: cpu@0 {
  41                         device_type = "cpu";
  42                         compatible = "arm,cortex-a15";
  43                         reg = <0x0>;
  44
  45                         operating-points = <
  46                                 /* kHz    uV */
  47                                 1000000 1060000
  48                                 1500000 1250000
  49                         >;
  50
  51                         clocks = <&dpll_mpu_ck>;
  52                         clock-names = "cpu";
  53
  54                         clock-latency = <300000>; /* From omap-cpufreq driver */
  55
  56                         /* cooling options */
  57                         #cooling-cells = <2>; /* min followed by max */
  58                 };
  59                 cpu@1 {
  60                         device_type = "cpu";
  61                         compatible = "arm,cortex-a15";
  62                         reg = <0x1>;
  63
  64                         operating-points = <
  65                                 /* kHz    uV */
  66                                 1000000 1060000
  67                                 1500000 1250000
  68                         >;
  69
  70                         clocks = <&dpll_mpu_ck>;
  71                         clock-names = "cpu";
  72
  73                         clock-latency = <300000>; /* From omap-cpufreq driver */
  74
  75                         /* cooling options */
  76                         #cooling-cells = <2>; /* min followed by max */
  77                 };
  78         };
  79
  80         thermal-zones {
  81                 #include "omap4-cpu-thermal.dtsi"
  82                 #include "omap5-gpu-thermal.dtsi"
  83                 #include "omap5-core-thermal.dtsi"
  84         };
  85
  86         timer {
  87                 compatible = "arm,armv7-timer";
  88                 /* PPI secure/nonsecure IRQ */
  89                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  90                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  91                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  92                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
  93                 interrupt-parent = <&gic>;
  94         };
  95
  96         pmu {
  97                 compatible = "arm,cortex-a15-pmu";
  98                 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
  99                              <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 100         };
 101
 102         gic: interrupt-controller@48211000 {
 103                 compatible = "arm,cortex-a15-gic";
 104                 interrupt-controller;
 105                 #interrupt-cells = <3>;
 106                 reg = <0 0x48211000 0 0x1000>,
 107                       <0 0x48212000 0 0x2000>,
 108                       <0 0x48214000 0 0x2000>,
 109                       <0 0x48216000 0 0x2000>;
 110                 interrupt-parent = <&gic>;
 111         };
 112
 113         wakeupgen: interrupt-controller@48281000 {
 114                 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 115                 interrupt-controller;
 116                 #interrupt-cells = <3>;
 117                 reg = <0 0x48281000 0 0x1000>;
 118                 interrupt-parent = <&gic>;
 119         };
 120
 121         /*
 122          * The soc node represents the soc top level view. It is used for IPs
 123          * that are not memory mapped in the MPU view or for the MPU itself.
 124          */
 125         soc {
 126                 compatible = "ti,omap-infra";
 127                 mpu {
 128                         compatible = "ti,omap4-mpu";
 129                         ti,hwmods = "mpu";
 130                         sram = <&ocmcram>;
 131                 };
 132         };
 133
 134         /*
 135          * XXX: Use a flat representation of the OMAP3 interconnect.
 136          * The real OMAP interconnect network is quite complex.
 137          * Since it will not bring real advantage to represent that in DT for
 138          * the moment, just use a fake OCP bus entry to represent the whole bus
 139          * hierarchy.
 140          */
 141         ocp {
 142                 compatible = "ti,omap5-l3-noc", "simple-bus";
 143                 #address-cells = <1>;
 144                 #size-cells = <1>;
 145                 ranges = <0 0 0 0xc0000000>;
 146                 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 147                 reg = <0 0x44000000 0 0x2000>,
 148                       <0 0x44800000 0 0x3000>,
 149                       <0 0x45000000 0 0x4000>;
 150                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 151                              <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 152
 153                 l4_wkup: interconnect@4ae00000 {
 154                 };
 155
 156                 l4_cfg: interconnect@4a000000 {
 157                 };
 158
 159                 l4_per: interconnect@48000000 {
 160                 };
 161
 162                 l4_abe: interconnect@40100000 {
 163                 };
 164
 165                 ocmcram: sram@40300000 {
 166                         compatible = "mmio-sram";
 167                         reg = <0x40300000 0x20000>; /* 128k */
 168                 };
 169
 170                 gpmc: gpmc@50000000 {
 171                         compatible = "ti,omap4430-gpmc";
 172                         reg = <0x50000000 0x1000>;
 173                         #address-cells = <2>;
 174                         #size-cells = <1>;
 175                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 176                         dmas = <&sdma 4>;
 177                         dma-names = "rxtx";
 178                         gpmc,num-cs = <8>;
 179                         gpmc,num-waitpins = <4>;
 180                         ti,hwmods = "gpmc";
 181                         clocks = <&l3_iclk_div>;
 182                         clock-names = "fck";
 183                         interrupt-controller;
 184                         #interrupt-cells = <2>;
 185                         gpio-controller;
 186                         #gpio-cells = <2>;
 187                 };
 188
 189                 mmu_dsp: mmu@4a066000 {
 190                         compatible = "ti,omap4-iommu";
 191                         reg = <0x4a066000 0x100>;
 192                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 193                         ti,hwmods = "mmu_dsp";
 194                         #iommu-cells = <0>;
 195                 };
 196
 197                 mmu_ipu: mmu@55082000 {
 198                         compatible = "ti,omap4-iommu";
 199                         reg = <0x55082000 0x100>;
 200                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 201                         ti,hwmods = "mmu_ipu";
 202                         #iommu-cells = <0>;
 203                         ti,iommu-bus-err-back;
 204                 };
 205
 206                 dmm@4e000000 {
 207                         compatible = "ti,omap5-dmm";
 208                         reg = <0x4e000000 0x800>;
 209                         interrupts = <0 113 0x4>;
 210                         ti,hwmods = "dmm";
 211                 };
 212
 213                 emif1: emif@4c000000 {
 214                         compatible      = "ti,emif-4d5";
 215                         ti,hwmods       = "emif1";
 216                         ti,no-idle-on-init;
 217                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 218                         reg = <0x4c000000 0x400>;
 219                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 220                         hw-caps-read-idle-ctrl;
 221                         hw-caps-ll-interface;
 222                         hw-caps-temp-alert;
 223                 };
 224
 225                 emif2: emif@4d000000 {
 226                         compatible      = "ti,emif-4d5";
 227                         ti,hwmods       = "emif2";
 228                         ti,no-idle-on-init;
 229                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 230                         reg = <0x4d000000 0x400>;
 231                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 232                         hw-caps-read-idle-ctrl;
 233                         hw-caps-ll-interface;
 234                         hw-caps-temp-alert;
 235                 };
 236
 237                 bandgap: bandgap@4a0021e0 {
 238                         reg = <0x4a0021e0 0xc
 239                                0x4a00232c 0xc
 240                                0x4a002380 0x2c
 241                                0x4a0023C0 0x3c>;
 242                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 243                         compatible = "ti,omap5430-bandgap";
 244
 245                         #thermal-sensor-cells = <1>;
 246                 };
 247
 248                 /* OCP2SCP3 */
 249                 sata: sata@4a141100 {
 250                         compatible = "snps,dwc-ahci";
 251                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
 252                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 253                         phys = <&sata_phy>;
 254                         phy-names = "sata-phy";
 255                         clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
 256                         ti,hwmods = "sata";
 257                         ports-implemented = <0x1>;
 258                 };
 259
 260                 target-module@56000000 {
 261                         compatible = "ti,sysc-omap4", "ti,sysc";
 262                         reg = <0x5600fe00 0x4>,
 263                               <0x5600fe10 0x4>;
 264                         reg-names = "rev", "sysc";
 265                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 266                                         <SYSC_IDLE_NO>,
 267                                         <SYSC_IDLE_SMART>;
 268                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 269                                         <SYSC_IDLE_NO>,
 270                                         <SYSC_IDLE_SMART>;
 271                         clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
 272                         clock-names = "fck";
 273                         #address-cells = <1>;
 274                         #size-cells = <1>;
 275                         ranges = <0 0x56000000 0x2000000>;
 276
 277                         /*
 278                          * Closed source PowerVR driver, no child device
 279                          * binding or driver in mainline
 280                          */
 281                 };
 282
 283                 dss: dss@58000000 {
 284                         compatible = "ti,omap5-dss";
 285                         reg = <0x58000000 0x80>;
 286                         status = "disabled";
 287                         ti,hwmods = "dss_core";
 288                         clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
 289                         clock-names = "fck";
 290                         #address-cells = <1>;
 291                         #size-cells = <1>;
 292                         ranges;
 293
 294                         dispc@58001000 {
 295                                 compatible = "ti,omap5-dispc";
 296                                 reg = <0x58001000 0x1000>;
 297                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 298                                 ti,hwmods = "dss_dispc";
 299                                 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
 300                                 clock-names = "fck";
 301                         };
 302
 303                         rfbi: encoder@58002000  {
 304                                 compatible = "ti,omap5-rfbi";
 305                                 reg = <0x58002000 0x100>;
 306                                 status = "disabled";
 307                                 ti,hwmods = "dss_rfbi";
 308                                 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
 309                                 clock-names = "fck", "ick";
 310                         };
 311
 312                         dsi1: encoder@58004000 {
 313                                 compatible = "ti,omap5-dsi";
 314                                 reg = <0x58004000 0x200>,
 315                                       <0x58004200 0x40>,
 316                                       <0x58004300 0x40>;
 317                                 reg-names = "proto", "phy", "pll";
 318                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 319                                 status = "disabled";
 320                                 ti,hwmods = "dss_dsi1";
 321                                 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
 322                                          <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
 323                                 clock-names = "fck", "sys_clk";
 324                         };
 325
 326                         dsi2: encoder@58005000 {
 327                                 compatible = "ti,omap5-dsi";
 328                                 reg = <0x58009000 0x200>,
 329                                       <0x58009200 0x40>,
 330                                       <0x58009300 0x40>;
 331                                 reg-names = "proto", "phy", "pll";
 332                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 333                                 status = "disabled";
 334                                 ti,hwmods = "dss_dsi2";
 335                                 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
 336                                          <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
 337                                 clock-names = "fck", "sys_clk";
 338                         };
 339
 340                         hdmi: encoder@58060000 {
 341                                 compatible = "ti,omap5-hdmi";
 342                                 reg = <0x58040000 0x200>,
 343                                       <0x58040200 0x80>,
 344                                       <0x58040300 0x80>,
 345                                       <0x58060000 0x19000>;
 346                                 reg-names = "wp", "pll", "phy", "core";
 347                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 348                                 status = "disabled";
 349                                 ti,hwmods = "dss_hdmi";
 350                                 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
 351                                          <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
 352                                 clock-names = "fck", "sys_clk";
 353                                 dmas = <&sdma 76>;
 354                                 dma-names = "audio_tx";
 355                         };
 356                 };
 357
 358                 abb_mpu: regulator-abb-mpu {
 359                         compatible = "ti,abb-v2";
 360                         regulator-name = "abb_mpu";
 361                         #address-cells = <0>;
 362                         #size-cells = <0>;
 363                         clocks = <&sys_clkin>;
 364                         ti,settling-time = <50>;
 365                         ti,clock-cycles = <16>;
 366
 367                         reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
 368                               <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
 369                         reg-names = "base-address", "int-address",
 370                                     "efuse-address", "ldo-address";
 371                         ti,tranxdone-status-mask = <0x80>;
 372                         /* LDOVBBMPU_MUX_CTRL */
 373                         ti,ldovbb-override-mask = <0x400>;
 374                         /* LDOVBBMPU_VSET_OUT */
 375                         ti,ldovbb-vset-mask = <0x1F>;
 376
 377                         /*
 378                          * NOTE: only FBB mode used but actual vset will
 379                          * determine final biasing
 380                          */
 381                         ti,abb_info = <
 382                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 383                         1060000         0       0x0     0 0x02000000 0x01F00000
 384                         1250000         0       0x4     0 0x02000000 0x01F00000
 385                         >;
 386                 };
 387
 388                 abb_mm: regulator-abb-mm {
 389                         compatible = "ti,abb-v2";
 390                         regulator-name = "abb_mm";
 391                         #address-cells = <0>;
 392                         #size-cells = <0>;
 393                         clocks = <&sys_clkin>;
 394                         ti,settling-time = <50>;
 395                         ti,clock-cycles = <16>;
 396
 397                         reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
 398                               <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
 399                         reg-names = "base-address", "int-address",
 400                                     "efuse-address", "ldo-address";
 401                         ti,tranxdone-status-mask = <0x80000000>;
 402                         /* LDOVBBMM_MUX_CTRL */
 403                         ti,ldovbb-override-mask = <0x400>;
 404                         /* LDOVBBMM_VSET_OUT */
 405                         ti,ldovbb-vset-mask = <0x1F>;
 406
 407                         /*
 408                          * NOTE: only FBB mode used but actual vset will
 409                          * determine final biasing
 410                          */
 411                         ti,abb_info = <
 412                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 413                         1025000         0       0x0     0 0x02000000 0x01F00000
 414                         1120000         0       0x4     0 0x02000000 0x01F00000
 415                         >;
 416                 };
 417         };
 418 };
 419
 420 &cpu_thermal {
 421         polling-delay = <500>; /* milliseconds */
 422         coefficients = <65 (-1791)>;
 423 };
 424
 425 #include "omap5-l4.dtsi"
 426 #include "omap54xx-clocks.dtsi"
 427
 428 &gpu_thermal {
 429         coefficients = <117 (-2992)>;
 430 };
 431
 432 &core_thermal {
 433         coefficients = <0 2000>;
 434 };
 435
 436 #include "omap5-l4-abe.dtsi"
 437 #include "omap54xx-clocks.dtsi"
 438
 439 &prm {
 440         prm_dsp: prm@400 {
 441                 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
 442                 reg = <0x400 0x100>;
 443                 #reset-cells = <1>;
 444         };
 445
 446         prm_core: prm@700 {
 447                 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
 448                 reg = <0x700 0x100>;
 449                 #reset-cells = <1>;
 450         };
 451
 452         prm_iva: prm@1200 {
 453                 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
 454                 reg = <0x1200 0x100>;
 455                 #reset-cells = <1>;
 456         };
 457
 458         prm_device: prm@1c00 {
 459                 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
 460                 reg = <0x1c00 0x100>;
 461                 #reset-cells = <1>;
 462         };
 463 };