arch/arm/boot/dts/ste-href.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2012 ST-Ericsson AB
   4  */
   5
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include "ste-dbx5x0.dtsi"
   8 #include "ste-href-family-pinctrl.dtsi"
   9
  10 / {
  11         memory {
  12                 device_type = "memory";
  13                 reg = <0x00000000 0x20000000>;
  14         };
  15
  16         soc {
  17                 uart@80120000 {
  18                         pinctrl-names = "default", "sleep";
  19                         pinctrl-0 = <&uart0_default_mode>;
  20                         pinctrl-1 = <&uart0_sleep_mode>;
  21                         status = "okay";
  22                 };
  23
  24                 /* This UART is unused and thus left disabled */
  25                 uart@80121000 {
  26                         pinctrl-names = "default", "sleep";
  27                         pinctrl-0 = <&uart1_default_mode>;
  28                         pinctrl-1 = <&uart1_sleep_mode>;
  29                 };
  30
  31                 uart@80007000 {
  32                         pinctrl-names = "default", "sleep";
  33                         pinctrl-0 = <&uart2_default_mode>;
  34                         pinctrl-1 = <&uart2_sleep_mode>;
  35                         status = "okay";
  36                 };
  37
  38                 i2c@80004000 {
  39                         pinctrl-names = "default","sleep";
  40                         pinctrl-0 = <&i2c0_default_mode>;
  41                         pinctrl-1 = <&i2c0_sleep_mode>;
  42                 };
  43
  44                 i2c@80122000 {
  45                         pinctrl-names = "default","sleep";
  46                         pinctrl-0 = <&i2c1_default_mode>;
  47                         pinctrl-1 = <&i2c1_sleep_mode>;
  48                 };
  49
  50                 i2c@80128000 {
  51                         pinctrl-names = "default","sleep";
  52                         pinctrl-0 = <&i2c2_default_mode>;
  53                         pinctrl-1 = <&i2c2_sleep_mode>;
  54                         lp5521@33 {
  55                                 compatible = "national,lp5521";
  56                                 reg = <0x33>;
  57                                 label = "lp5521_pri";
  58                                 clock-mode = /bits/ 8 <2>;
  59                                 chan0 {
  60                                         led-cur = /bits/ 8 <0x2f>;
  61                                         max-cur = /bits/ 8 <0x5f>;
  62                                         linux,default-trigger = "heartbeat";
  63                                 };
  64                                 chan1 {
  65                                         led-cur = /bits/ 8 <0x2f>;
  66                                         max-cur = /bits/ 8 <0x5f>;
  67                                 };
  68                                 chan2 {
  69                                         led-cur = /bits/ 8 <0x2f>;
  70                                         max-cur = /bits/ 8 <0x5f>;
  71                                 };
  72                         };
  73                         lp5521@34 {
  74                                 compatible = "national,lp5521";
  75                                 reg = <0x34>;
  76                                 label = "lp5521_sec";
  77                                 clock-mode = /bits/ 8 <2>;
  78                                 chan0 {
  79                                         led-cur = /bits/ 8 <0x2f>;
  80                                         max-cur = /bits/ 8 <0x5f>;
  81                                 };
  82                                 chan1 {
  83                                         led-cur = /bits/ 8 <0x2f>;
  84                                         max-cur = /bits/ 8 <0x5f>;
  85                                 };
  86                                 chan2 {
  87                                         led-cur = /bits/ 8 <0x2f>;
  88                                         max-cur = /bits/ 8 <0x5f>;
  89                                 };
  90                         };
  91                         bh1780@29 {
  92                                 compatible = "rohm,bh1780gli";
  93                                 reg = <0x29>;
  94                         };
  95                 };
  96
  97                 i2c@80110000 {
  98                         pinctrl-names = "default","sleep";
  99                         pinctrl-0 = <&i2c3_default_mode>;
 100                         pinctrl-1 = <&i2c3_sleep_mode>;
 101                 };
 102
 103                 /* ST6G3244ME level translator for 1.8/2.9 V */
 104                 vmmci: regulator-gpio {
 105                         compatible = "regulator-gpio";
 106
 107                         regulator-min-microvolt = <1800000>;
 108                         regulator-max-microvolt = <2900000>;
 109                         regulator-name = "mmci-reg";
 110                         regulator-type = "voltage";
 111
 112                         startup-delay-us = <100>;
 113
 114                         states = <1800000 0x1
 115                                   2900000 0x0>;
 116                 };
 117
 118                 // External Micro SD slot
 119                 sdi0_per1@80126000 {
 120                         arm,primecell-periphid = <0x10480180>;
 121                         max-frequency = <100000000>;
 122                         bus-width = <4>;
 123                         cap-sd-highspeed;
 124                         cap-mmc-highspeed;
 125                         sd-uhs-sdr12;
 126                         sd-uhs-sdr25;
 127                         full-pwr-cycle;
 128                         st,sig-dir-dat0;
 129                         st,sig-dir-dat2;
 130                         st,sig-dir-cmd;
 131                         st,sig-pin-fbclk;
 132                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 133                         vqmmc-supply = <&vmmci>;
 134                         pinctrl-names = "default", "sleep";
 135                         pinctrl-0 = <&sdi0_default_mode>;
 136                         pinctrl-1 = <&sdi0_sleep_mode>;
 137
 138                         status = "okay";
 139                 };
 140
 141                 // WLAN SDIO channel
 142                 sdi1_per2@80118000 {
 143                         arm,primecell-periphid = <0x10480180>;
 144                         max-frequency = <100000000>;
 145                         bus-width = <4>;
 146                         non-removable;
 147                         pinctrl-names = "default", "sleep";
 148                         pinctrl-0 = <&sdi1_default_mode>;
 149                         pinctrl-1 = <&sdi1_sleep_mode>;
 150
 151                         status = "okay";
 152                 };
 153
 154                 // PoP:ed eMMC
 155                 sdi2_per3@80005000 {
 156                         arm,primecell-periphid = <0x10480180>;
 157                         max-frequency = <100000000>;
 158                         bus-width = <8>;
 159                         cap-mmc-highspeed;
 160                         non-removable;
 161                         vmmc-supply = <&db8500_vsmps2_reg>;
 162                         pinctrl-names = "default", "sleep";
 163                         pinctrl-0 = <&sdi2_default_mode>;
 164                         pinctrl-1 = <&sdi2_sleep_mode>;
 165
 166                         status = "okay";
 167                 };
 168
 169                 // On-board eMMC
 170                 sdi4_per2@80114000 {
 171                         arm,primecell-periphid = <0x10480180>;
 172                         max-frequency = <100000000>;
 173                         bus-width = <8>;
 174                         cap-mmc-highspeed;
 175                         non-removable;
 176                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 177                         pinctrl-names = "default", "sleep";
 178                         pinctrl-0 = <&sdi4_default_mode>;
 179                         pinctrl-1 = <&sdi4_sleep_mode>;
 180
 181                         status = "okay";
 182                 };
 183
 184                 msp0: msp@80123000 {
 185                         pinctrl-names = "default";
 186                         pinctrl-0 = <&msp0_default_mode>;
 187                         status = "okay";
 188                 };
 189
 190                 msp1: msp@80124000 {
 191                         pinctrl-names = "default";
 192                         pinctrl-0 = <&msp1_default_mode>;
 193                         status = "okay";
 194                 };
 195
 196                 msp2: msp@80117000 {
 197                         pinctrl-names = "default";
 198                         pinctrl-0 = <&msp2_default_mode>;
 199                 };
 200
 201                 msp3: msp@80125000 {
 202                         status = "okay";
 203                 };
 204
 205                 prcmu@80157000 {
 206                         ab8500 {
 207                                 ab8500-gpio {
 208                                 };
 209
 210                                 ab8500_usb {
 211                                         pinctrl-names = "default", "sleep";
 212                                         pinctrl-0 = <&musb_default_mode>;
 213                                         pinctrl-1 = <&musb_sleep_mode>;
 214                                 };
 215
 216                                 ab8500-regulators {
 217                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 218                                                 regulator-name = "V-DISPLAY";
 219                                         };
 220
 221                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 222                                                 regulator-name = "V-eMMC1";
 223                                         };
 224
 225                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 226                                                 regulator-name = "V-MMC-SD";
 227                                         };
 228
 229                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 230                                                 regulator-name = "V-INTCORE";
 231                                         };
 232
 233                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 234                                                 regulator-name = "V-TVOUT";
 235                                         };
 236
 237                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 238                                                 regulator-name = "V-AUD";
 239                                         };
 240
 241                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 242                                                 regulator-name = "V-AMIC1";
 243                                         };
 244
 245                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 246                                                 regulator-name = "V-AMIC2";
 247                                         };
 248
 249                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 250                                                 regulator-name = "V-DMIC";
 251                                         };
 252
 253                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 254                                                 regulator-name = "V-CSI/DSI";
 255                                         };
 256                                 };
 257                         };
 258                 };
 259
 260                 mcde@a0350000 {
 261                         pinctrl-names = "default", "sleep";
 262                         pinctrl-0 = <&lcd_default_mode>;
 263                         pinctrl-1 = <&lcd_sleep_mode>;
 264                 };
 265         };
 266 };