treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / mpc834x_mds.dts
blob6c8cb859c55f830c4e7a6d4b86c1bdd785b596fa
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * MPC8349E MDS Device Tree Source
4  *
5  * Copyright 2005, 2006 Freescale Semiconductor Inc.
6  */
8 /dts-v1/;
10 / {
11         model = "MPC8349EMDS";
12         compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
13         #address-cells = <1>;
14         #size-cells = <1>;
16         aliases {
17                 ethernet0 = &enet0;
18                 ethernet1 = &enet1;
19                 serial0 = &serial0;
20                 serial1 = &serial1;
21                 pci0 = &pci0;
22                 pci1 = &pci1;
23         };
25         cpus {
26                 #address-cells = <1>;
27                 #size-cells = <0>;
29                 PowerPC,8349@0 {
30                         device_type = "cpu";
31                         reg = <0x0>;
32                         d-cache-line-size = <32>;
33                         i-cache-line-size = <32>;
34                         d-cache-size = <32768>;
35                         i-cache-size = <32768>;
36                         timebase-frequency = <0>;       // from bootloader
37                         bus-frequency = <0>;            // from bootloader
38                         clock-frequency = <0>;          // from bootloader
39                 };
40         };
42         memory {
43                 device_type = "memory";
44                 reg = <0x00000000 0x10000000>;  // 256MB at 0
45         };
47         bcsr@e2400000 {
48                 compatible = "fsl,mpc8349mds-bcsr";
49                 reg = <0xe2400000 0x8000>;
50         };
52         soc8349@e0000000 {
53                 #address-cells = <1>;
54                 #size-cells = <1>;
55                 device_type = "soc";
56                 compatible = "simple-bus";
57                 ranges = <0x0 0xe0000000 0x00100000>;
58                 reg = <0xe0000000 0x00000200>;
59                 bus-frequency = <0>;
61                 wdt@200 {
62                         device_type = "watchdog";
63                         compatible = "mpc83xx_wdt";
64                         reg = <0x200 0x100>;
65                 };
67                 i2c@3000 {
68                         #address-cells = <1>;
69                         #size-cells = <0>;
70                         cell-index = <0>;
71                         compatible = "fsl-i2c";
72                         reg = <0x3000 0x100>;
73                         interrupts = <14 0x8>;
74                         interrupt-parent = <&ipic>;
75                         dfsrr;
77                         rtc@68 {
78                                 compatible = "dallas,ds1374";
79                                 reg = <0x68>;
80                         };
81                 };
83                 i2c@3100 {
84                         #address-cells = <1>;
85                         #size-cells = <0>;
86                         cell-index = <1>;
87                         compatible = "fsl-i2c";
88                         reg = <0x3100 0x100>;
89                         interrupts = <15 0x8>;
90                         interrupt-parent = <&ipic>;
91                         dfsrr;
92                 };
94                 spi@7000 {
95                         cell-index = <0>;
96                         compatible = "fsl,spi";
97                         reg = <0x7000 0x1000>;
98                         interrupts = <16 0x8>;
99                         interrupt-parent = <&ipic>;
100                         mode = "cpu";
101                 };
103                 dma@82a8 {
104                         #address-cells = <1>;
105                         #size-cells = <1>;
106                         compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
107                         reg = <0x82a8 4>;
108                         ranges = <0 0x8100 0x1a8>;
109                         interrupt-parent = <&ipic>;
110                         interrupts = <71 8>;
111                         cell-index = <0>;
112                         dma-channel@0 {
113                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
114                                 reg = <0 0x80>;
115                                 cell-index = <0>;
116                                 interrupt-parent = <&ipic>;
117                                 interrupts = <71 8>;
118                         };
119                         dma-channel@80 {
120                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
121                                 reg = <0x80 0x80>;
122                                 cell-index = <1>;
123                                 interrupt-parent = <&ipic>;
124                                 interrupts = <71 8>;
125                         };
126                         dma-channel@100 {
127                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
128                                 reg = <0x100 0x80>;
129                                 cell-index = <2>;
130                                 interrupt-parent = <&ipic>;
131                                 interrupts = <71 8>;
132                         };
133                         dma-channel@180 {
134                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
135                                 reg = <0x180 0x28>;
136                                 cell-index = <3>;
137                                 interrupt-parent = <&ipic>;
138                                 interrupts = <71 8>;
139                         };
140                 };
142                 /* phy type (ULPI or SERIAL) are only types supported for MPH */
143                 /* port = 0 or 1 */
144                 usb@22000 {
145                         compatible = "fsl-usb2-mph";
146                         reg = <0x22000 0x1000>;
147                         #address-cells = <1>;
148                         #size-cells = <0>;
149                         interrupt-parent = <&ipic>;
150                         interrupts = <39 0x8>;
151                         phy_type = "ulpi";
152                         port0;
153                 };
154                 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
155                 usb@23000 {
156                         compatible = "fsl-usb2-dr";
157                         reg = <0x23000 0x1000>;
158                         #address-cells = <1>;
159                         #size-cells = <0>;
160                         interrupt-parent = <&ipic>;
161                         interrupts = <38 0x8>;
162                         dr_mode = "otg";
163                         phy_type = "ulpi";
164                 };
166                 enet0: ethernet@24000 {
167                         #address-cells = <1>;
168                         #size-cells = <1>;
169                         cell-index = <0>;
170                         device_type = "network";
171                         model = "TSEC";
172                         compatible = "gianfar";
173                         reg = <0x24000 0x1000>;
174                         ranges = <0x0 0x24000 0x1000>;
175                         local-mac-address = [ 00 00 00 00 00 00 ];
176                         interrupts = <32 0x8 33 0x8 34 0x8>;
177                         interrupt-parent = <&ipic>;
178                         tbi-handle = <&tbi0>;
179                         phy-handle = <&phy0>;
180                         linux,network-index = <0>;
182                         mdio@520 {
183                                 #address-cells = <1>;
184                                 #size-cells = <0>;
185                                 compatible = "fsl,gianfar-mdio";
186                                 reg = <0x520 0x20>;
188                                 phy0: ethernet-phy@0 {
189                                         interrupt-parent = <&ipic>;
190                                         interrupts = <17 0x8>;
191                                         reg = <0x0>;
192                                 };
194                                 phy1: ethernet-phy@1 {
195                                         interrupt-parent = <&ipic>;
196                                         interrupts = <18 0x8>;
197                                         reg = <0x1>;
198                                 };
200                                 tbi0: tbi-phy@11 {
201                                         reg = <0x11>;
202                                         device_type = "tbi-phy";
203                                 };
204                         };
205                 };
207                 enet1: ethernet@25000 {
208                         #address-cells = <1>;
209                         #size-cells = <1>;
210                         cell-index = <1>;
211                         device_type = "network";
212                         model = "TSEC";
213                         compatible = "gianfar";
214                         reg = <0x25000 0x1000>;
215                         ranges = <0x0 0x25000 0x1000>;
216                         local-mac-address = [ 00 00 00 00 00 00 ];
217                         interrupts = <35 0x8 36 0x8 37 0x8>;
218                         interrupt-parent = <&ipic>;
219                         tbi-handle = <&tbi1>;
220                         phy-handle = <&phy1>;
221                         linux,network-index = <1>;
223                         mdio@520 {
224                                 #address-cells = <1>;
225                                 #size-cells = <0>;
226                                 compatible = "fsl,gianfar-tbi";
227                                 reg = <0x520 0x20>;
229                                 tbi1: tbi-phy@11 {
230                                         reg = <0x11>;
231                                         device_type = "tbi-phy";
232                                 };
233                         };
234                 };
236                 serial0: serial@4500 {
237                         cell-index = <0>;
238                         device_type = "serial";
239                         compatible = "fsl,ns16550", "ns16550";
240                         reg = <0x4500 0x100>;
241                         clock-frequency = <0>;
242                         interrupts = <9 0x8>;
243                         interrupt-parent = <&ipic>;
244                 };
246                 serial1: serial@4600 {
247                         cell-index = <1>;
248                         device_type = "serial";
249                         compatible = "fsl,ns16550", "ns16550";
250                         reg = <0x4600 0x100>;
251                         clock-frequency = <0>;
252                         interrupts = <10 0x8>;
253                         interrupt-parent = <&ipic>;
254                 };
256                 crypto@30000 {
257                         compatible = "fsl,sec2.0";
258                         reg = <0x30000 0x10000>;
259                         interrupts = <11 0x8>;
260                         interrupt-parent = <&ipic>;
261                         fsl,num-channels = <4>;
262                         fsl,channel-fifo-len = <24>;
263                         fsl,exec-units-mask = <0x7e>;
264                         fsl,descriptor-types-mask = <0x01010ebf>;
265                 };
267                 /* IPIC
268                  * interrupts cell = <intr #, sense>
269                  * sense values match linux IORESOURCE_IRQ_* defines:
270                  * sense == 8: Level, low assertion
271                  * sense == 2: Edge, high-to-low change
272                  */
273                 ipic: pic@700 {
274                         interrupt-controller;
275                         #address-cells = <0>;
276                         #interrupt-cells = <2>;
277                         reg = <0x700 0x100>;
278                         device_type = "ipic";
279                 };
280         };
282         pci0: pci@e0008500 {
283                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
284                 interrupt-map = <
286                                 /* IDSEL 0x11 */
287                                  0x8800 0x0 0x0 0x1 &ipic 20 0x8
288                                  0x8800 0x0 0x0 0x2 &ipic 21 0x8
289                                  0x8800 0x0 0x0 0x3 &ipic 22 0x8
290                                  0x8800 0x0 0x0 0x4 &ipic 23 0x8
292                                 /* IDSEL 0x12 */
293                                  0x9000 0x0 0x0 0x1 &ipic 22 0x8
294                                  0x9000 0x0 0x0 0x2 &ipic 23 0x8
295                                  0x9000 0x0 0x0 0x3 &ipic 20 0x8
296                                  0x9000 0x0 0x0 0x4 &ipic 21 0x8
298                                 /* IDSEL 0x13 */
299                                  0x9800 0x0 0x0 0x1 &ipic 23 0x8
300                                  0x9800 0x0 0x0 0x2 &ipic 20 0x8
301                                  0x9800 0x0 0x0 0x3 &ipic 21 0x8
302                                  0x9800 0x0 0x0 0x4 &ipic 22 0x8
304                                 /* IDSEL 0x15 */
305                                  0xa800 0x0 0x0 0x1 &ipic 20 0x8
306                                  0xa800 0x0 0x0 0x2 &ipic 21 0x8
307                                  0xa800 0x0 0x0 0x3 &ipic 22 0x8
308                                  0xa800 0x0 0x0 0x4 &ipic 23 0x8
310                                 /* IDSEL 0x16 */
311                                  0xb000 0x0 0x0 0x1 &ipic 23 0x8
312                                  0xb000 0x0 0x0 0x2 &ipic 20 0x8
313                                  0xb000 0x0 0x0 0x3 &ipic 21 0x8
314                                  0xb000 0x0 0x0 0x4 &ipic 22 0x8
316                                 /* IDSEL 0x17 */
317                                  0xb800 0x0 0x0 0x1 &ipic 22 0x8
318                                  0xb800 0x0 0x0 0x2 &ipic 23 0x8
319                                  0xb800 0x0 0x0 0x3 &ipic 20 0x8
320                                  0xb800 0x0 0x0 0x4 &ipic 21 0x8
322                                 /* IDSEL 0x18 */
323                                  0xc000 0x0 0x0 0x1 &ipic 21 0x8
324                                  0xc000 0x0 0x0 0x2 &ipic 22 0x8
325                                  0xc000 0x0 0x0 0x3 &ipic 23 0x8
326                                  0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
327                 interrupt-parent = <&ipic>;
328                 interrupts = <66 0x8>;
329                 bus-range = <0 0>;
330                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
331                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
332                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
333                 clock-frequency = <66666666>;
334                 #interrupt-cells = <1>;
335                 #size-cells = <2>;
336                 #address-cells = <3>;
337                 reg = <0xe0008500 0x100         /* internal registers */
338                        0xe0008300 0x8>;         /* config space access registers */
339                 compatible = "fsl,mpc8349-pci";
340                 device_type = "pci";
341         };
343         pci1: pci@e0008600 {
344                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
345                 interrupt-map = <
347                                 /* IDSEL 0x11 */
348                                  0x8800 0x0 0x0 0x1 &ipic 20 0x8
349                                  0x8800 0x0 0x0 0x2 &ipic 21 0x8
350                                  0x8800 0x0 0x0 0x3 &ipic 22 0x8
351                                  0x8800 0x0 0x0 0x4 &ipic 23 0x8
353                                 /* IDSEL 0x12 */
354                                  0x9000 0x0 0x0 0x1 &ipic 22 0x8
355                                  0x9000 0x0 0x0 0x2 &ipic 23 0x8
356                                  0x9000 0x0 0x0 0x3 &ipic 20 0x8
357                                  0x9000 0x0 0x0 0x4 &ipic 21 0x8
359                                 /* IDSEL 0x13 */
360                                  0x9800 0x0 0x0 0x1 &ipic 23 0x8
361                                  0x9800 0x0 0x0 0x2 &ipic 20 0x8
362                                  0x9800 0x0 0x0 0x3 &ipic 21 0x8
363                                  0x9800 0x0 0x0 0x4 &ipic 22 0x8
365                                 /* IDSEL 0x15 */
366                                  0xa800 0x0 0x0 0x1 &ipic 20 0x8
367                                  0xa800 0x0 0x0 0x2 &ipic 21 0x8
368                                  0xa800 0x0 0x0 0x3 &ipic 22 0x8
369                                  0xa800 0x0 0x0 0x4 &ipic 23 0x8
371                                 /* IDSEL 0x16 */
372                                  0xb000 0x0 0x0 0x1 &ipic 23 0x8
373                                  0xb000 0x0 0x0 0x2 &ipic 20 0x8
374                                  0xb000 0x0 0x0 0x3 &ipic 21 0x8
375                                  0xb000 0x0 0x0 0x4 &ipic 22 0x8
377                                 /* IDSEL 0x17 */
378                                  0xb800 0x0 0x0 0x1 &ipic 22 0x8
379                                  0xb800 0x0 0x0 0x2 &ipic 23 0x8
380                                  0xb800 0x0 0x0 0x3 &ipic 20 0x8
381                                  0xb800 0x0 0x0 0x4 &ipic 21 0x8
383                                 /* IDSEL 0x18 */
384                                  0xc000 0x0 0x0 0x1 &ipic 21 0x8
385                                  0xc000 0x0 0x0 0x2 &ipic 22 0x8
386                                  0xc000 0x0 0x0 0x3 &ipic 23 0x8
387                                  0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
388                 interrupt-parent = <&ipic>;
389                 interrupts = <67 0x8>;
390                 bus-range = <0 0>;
391                 ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
392                           0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
393                           0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
394                 clock-frequency = <66666666>;
395                 #interrupt-cells = <1>;
396                 #size-cells = <2>;
397                 #address-cells = <3>;
398                 reg = <0xe0008600 0x100         /* internal registers */
399                        0xe0008380 0x8>;         /* config space access registers */
400                 compatible = "fsl,mpc8349-pci";
401                 device_type = "pci";
402         };