treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / tqm8540.dts
blob9c1eb9779108c1edee8122d47e76b8fe2d5dc634
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * TQM 8540 Device Tree Source
4  *
5  * Copyright 2008 Freescale Semiconductor Inc.
6  */
8 /dts-v1/;
10 / {
11         model = "tqc,tqm8540";
12         compatible = "tqc,tqm8540";
13         #address-cells = <1>;
14         #size-cells = <1>;
16         aliases {
17                 ethernet0 = &enet0;
18                 ethernet1 = &enet1;
19                 ethernet2 = &enet2;
20                 serial0 = &serial0;
21                 serial1 = &serial1;
22                 pci0 = &pci0;
23         };
25         cpus {
26                 #address-cells = <1>;
27                 #size-cells = <0>;
29                 PowerPC,8540@0 {
30                         device_type = "cpu";
31                         reg = <0>;
32                         d-cache-line-size = <32>;
33                         i-cache-line-size = <32>;
34                         d-cache-size = <32768>;
35                         i-cache-size = <32768>;
36                         timebase-frequency = <0>;
37                         bus-frequency = <0>;
38                         clock-frequency = <0>;
39                         next-level-cache = <&L2>;
40                 };
41         };
43         memory {
44                 device_type = "memory";
45                 reg = <0x00000000 0x10000000>;
46         };
48         soc@e0000000 {
49                 #address-cells = <1>;
50                 #size-cells = <1>;
51                 device_type = "soc";
52                 ranges = <0x0 0xe0000000 0x100000>;
53                 bus-frequency = <0>;
54                 compatible = "fsl,mpc8540-immr", "simple-bus";
56                 ecm-law@0 {
57                         compatible = "fsl,ecm-law";
58                         reg = <0x0 0x1000>;
59                         fsl,num-laws = <8>;
60                 };
62                 ecm@1000 {
63                         compatible = "fsl,mpc8540-ecm", "fsl,ecm";
64                         reg = <0x1000 0x1000>;
65                         interrupts = <17 2>;
66                         interrupt-parent = <&mpic>;
67                 };
69                 memory-controller@2000 {
70                         compatible = "fsl,mpc8540-memory-controller";
71                         reg = <0x2000 0x1000>;
72                         interrupt-parent = <&mpic>;
73                         interrupts = <18 2>;
74                 };
76                 L2: l2-cache-controller@20000 {
77                         compatible = "fsl,mpc8540-l2-cache-controller";
78                         reg = <0x20000 0x1000>;
79                         cache-line-size = <32>;
80                         cache-size = <0x40000>; // L2, 256K
81                         interrupt-parent = <&mpic>;
82                         interrupts = <16 2>;
83                 };
85                 i2c@3000 {
86                         #address-cells = <1>;
87                         #size-cells = <0>;
88                         cell-index = <0>;
89                         compatible = "fsl-i2c";
90                         reg = <0x3000 0x100>;
91                         interrupts = <43 2>;
92                         interrupt-parent = <&mpic>;
93                         dfsrr;
95                         dtt@48 {
96                                 compatible = "national,lm75";
97                                 reg = <0x48>;
98                         };
100                         rtc@68 {
101                                 compatible = "dallas,ds1337";
102                                 reg = <0x68>;
103                         };
104                 };
106                 dma@21300 {
107                         #address-cells = <1>;
108                         #size-cells = <1>;
109                         compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
110                         reg = <0x21300 0x4>;
111                         ranges = <0x0 0x21100 0x200>;
112                         cell-index = <0>;
113                         dma-channel@0 {
114                                 compatible = "fsl,mpc8540-dma-channel",
115                                                 "fsl,eloplus-dma-channel";
116                                 reg = <0x0 0x80>;
117                                 cell-index = <0>;
118                                 interrupt-parent = <&mpic>;
119                                 interrupts = <20 2>;
120                         };
121                         dma-channel@80 {
122                                 compatible = "fsl,mpc8540-dma-channel",
123                                                 "fsl,eloplus-dma-channel";
124                                 reg = <0x80 0x80>;
125                                 cell-index = <1>;
126                                 interrupt-parent = <&mpic>;
127                                 interrupts = <21 2>;
128                         };
129                         dma-channel@100 {
130                                 compatible = "fsl,mpc8540-dma-channel",
131                                                 "fsl,eloplus-dma-channel";
132                                 reg = <0x100 0x80>;
133                                 cell-index = <2>;
134                                 interrupt-parent = <&mpic>;
135                                 interrupts = <22 2>;
136                         };
137                         dma-channel@180 {
138                                 compatible = "fsl,mpc8540-dma-channel",
139                                                 "fsl,eloplus-dma-channel";
140                                 reg = <0x180 0x80>;
141                                 cell-index = <3>;
142                                 interrupt-parent = <&mpic>;
143                                 interrupts = <23 2>;
144                         };
145                 };
147                 enet0: ethernet@24000 {
148                         #address-cells = <1>;
149                         #size-cells = <1>;
150                         cell-index = <0>;
151                         device_type = "network";
152                         model = "TSEC";
153                         compatible = "gianfar";
154                         reg = <0x24000 0x1000>;
155                         ranges = <0x0 0x24000 0x1000>;
156                         local-mac-address = [ 00 00 00 00 00 00 ];
157                         interrupts = <29 2 30 2 34 2>;
158                         interrupt-parent = <&mpic>;
159                         phy-handle = <&phy2>;
161                         mdio@520 {
162                                 #address-cells = <1>;
163                                 #size-cells = <0>;
164                                 compatible = "fsl,gianfar-mdio";
165                                 reg = <0x520 0x20>;
167                                 phy1: ethernet-phy@1 {
168                                         interrupt-parent = <&mpic>;
169                                         interrupts = <8 1>;
170                                         reg = <1>;
171                                 };
172                                 phy2: ethernet-phy@2 {
173                                         interrupt-parent = <&mpic>;
174                                         interrupts = <8 1>;
175                                         reg = <2>;
176                                 };
177                                 phy3: ethernet-phy@3 {
178                                         interrupt-parent = <&mpic>;
179                                         interrupts = <8 1>;
180                                         reg = <3>;
181                                 };
182                                 tbi0: tbi-phy@11 {
183                                         reg = <0x11>;
184                                         device_type = "tbi-phy";
185                                 };
186                         };
187                 };
189                 enet1: ethernet@25000 {
190                         #address-cells = <1>;
191                         #size-cells = <1>;
192                         cell-index = <1>;
193                         device_type = "network";
194                         model = "TSEC";
195                         compatible = "gianfar";
196                         reg = <0x25000 0x1000>;
197                         ranges = <0x0 0x25000 0x1000>;
198                         local-mac-address = [ 00 00 00 00 00 00 ];
199                         interrupts = <35 2 36 2 40 2>;
200                         interrupt-parent = <&mpic>;
201                         phy-handle = <&phy1>;
203                         mdio@520 {
204                                 #address-cells = <1>;
205                                 #size-cells = <0>;
206                                 compatible = "fsl,gianfar-tbi";
207                                 reg = <0x520 0x20>;
209                                 tbi1: tbi-phy@11 {
210                                         reg = <0x11>;
211                                         device_type = "tbi-phy";
212                                 };
213                         };
214                 };
216                 enet2: ethernet@26000 {
217                         #address-cells = <1>;
218                         #size-cells = <1>;
219                         cell-index = <2>;
220                         device_type = "network";
221                         model = "FEC";
222                         compatible = "gianfar";
223                         reg = <0x26000 0x1000>;
224                         ranges = <0x0 0x26000 0x1000>;
225                         local-mac-address = [ 00 00 00 00 00 00 ];
226                         interrupts = <41 2>;
227                         interrupt-parent = <&mpic>;
228                         phy-handle = <&phy3>;
230                         mdio@520 {
231                                 #address-cells = <1>;
232                                 #size-cells = <0>;
233                                 compatible = "fsl,gianfar-tbi";
234                                 reg = <0x520 0x20>;
236                                 tbi2: tbi-phy@11 {
237                                         reg = <0x11>;
238                                         device_type = "tbi-phy";
239                                 };
240                         };
241                 };
243                 serial0: serial@4500 {
244                         cell-index = <0>;
245                         device_type = "serial";
246                         compatible = "fsl,ns16550", "ns16550";
247                         reg = <0x4500 0x100>;   // reg base, size
248                         clock-frequency = <0>;  // should we fill in in uboot?
249                         interrupts = <42 2>;
250                         interrupt-parent = <&mpic>;
251                 };
253                 serial1: serial@4600 {
254                         cell-index = <1>;
255                         device_type = "serial";
256                         compatible = "fsl,ns16550", "ns16550";
257                         reg = <0x4600 0x100>;   // reg base, size
258                         clock-frequency = <0>;  // should we fill in in uboot?
259                         interrupts = <42 2>;
260                         interrupt-parent = <&mpic>;
261                 };
263                 mpic: pic@40000 {
264                         interrupt-controller;
265                         #address-cells = <0>;
266                         #interrupt-cells = <2>;
267                         reg = <0x40000 0x40000>;
268                         device_type = "open-pic";
269                         compatible = "chrp,open-pic";
270                 };
271         };
273         localbus@e0005000 {
274                 #address-cells = <2>;
275                 #size-cells = <1>;
276                 compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus",
277                              "simple-bus";
278                 reg = <0xe0005000 0x1000>;
279                 interrupt-parent = <&mpic>;
280                 interrupts = <19 2>;
282                 ranges = <0x0 0x0 0xfe000000 0x02000000>;
284                 nor@0,0 {
285                         #address-cells = <1>;
286                         #size-cells = <1>;
287                         compatible = "cfi-flash";
288                         reg = <0x0 0x0 0x02000000>;
289                         bank-width = <4>;
290                         device-width = <2>;
291                         partition@0 {
292                                 label = "kernel";
293                                 reg = <0x00000000 0x00180000>;
294                         };
295                         partition@180000 {
296                                 label = "root";
297                                 reg = <0x00180000 0x01dc0000>;
298                         };
299                         partition@1f40000 {
300                                 label = "env1";
301                                 reg = <0x01f40000 0x00040000>;
302                         };
303                         partition@1f80000 {
304                                 label = "env2";
305                                 reg = <0x01f80000 0x00040000>;
306                         };
307                         partition@1fc0000 {
308                                 label = "u-boot";
309                                 reg = <0x01fc0000 0x00040000>;
310                                 read-only;
311                         };
312                 };
313         };
315         pci0: pci@e0008000 {
316                 #interrupt-cells = <1>;
317                 #size-cells = <2>;
318                 #address-cells = <3>;
319                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
320                 device_type = "pci";
321                 reg = <0xe0008000 0x1000>;
322                 clock-frequency = <66666666>;
323                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
324                 interrupt-map = <
325                                 /* IDSEL 28 */
326                                  0xe000 0 0 1 &mpic 2 1
327                                  0xe000 0 0 2 &mpic 3 1
328                                  0xe000 0 0 3 &mpic 6 1
329                                  0xe000 0 0 4 &mpic 5 1
331                                 /* IDSEL 11 */
332                                  0x5800 0 0 1 &mpic 6 1
333                                  0x5800 0 0 2 &mpic 5 1
334                                  >;
336                 interrupt-parent = <&mpic>;
337                 interrupts = <24 2>;
338                 bus-range = <0 0>;
339                 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
340                           0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
341         };