treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / tqm8560.dts
blob7415cb69f60d5579d14c8125b0e5b085031e0be0
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * TQM 8560 Device Tree Source
4  *
5  * Copyright 2008 Freescale Semiconductor Inc.
6  * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
7  */
9 /dts-v1/;
11 / {
12         model = "tqc,tqm8560";
13         compatible = "tqc,tqm8560";
14         #address-cells = <1>;
15         #size-cells = <1>;
17         aliases {
18                 ethernet0 = &enet0;
19                 ethernet1 = &enet1;
20                 ethernet2 = &enet2;
21                 serial0 = &serial0;
22                 serial1 = &serial1;
23                 pci0 = &pci0;
24         };
26         cpus {
27                 #address-cells = <1>;
28                 #size-cells = <0>;
30                 PowerPC,8560@0 {
31                         device_type = "cpu";
32                         reg = <0>;
33                         d-cache-line-size = <32>;
34                         i-cache-line-size = <32>;
35                         d-cache-size = <32768>;
36                         i-cache-size = <32768>;
37                         timebase-frequency = <0>;
38                         bus-frequency = <0>;
39                         clock-frequency = <0>;
40                         next-level-cache = <&L2>;
41                 };
42         };
44         memory {
45                 device_type = "memory";
46                 reg = <0x00000000 0x10000000>;
47         };
49         soc@e0000000 {
50                 #address-cells = <1>;
51                 #size-cells = <1>;
52                 device_type = "soc";
53                 ranges = <0x0 0xe0000000 0x100000>;
54                 bus-frequency = <0>;
55                 compatible = "fsl,mpc8560-immr", "simple-bus";
57                 ecm-law@0 {
58                         compatible = "fsl,ecm-law";
59                         reg = <0x0 0x1000>;
60                         fsl,num-laws = <8>;
61                 };
63                 ecm@1000 {
64                         compatible = "fsl,mpc8560-ecm", "fsl,ecm";
65                         reg = <0x1000 0x1000>;
66                         interrupts = <17 2>;
67                         interrupt-parent = <&mpic>;
68                 };
70                 memory-controller@2000 {
71                         compatible = "fsl,mpc8540-memory-controller";
72                         reg = <0x2000 0x1000>;
73                         interrupt-parent = <&mpic>;
74                         interrupts = <18 2>;
75                 };
77                 L2: l2-cache-controller@20000 {
78                         compatible = "fsl,mpc8540-l2-cache-controller";
79                         reg = <0x20000 0x1000>;
80                         cache-line-size = <32>;
81                         cache-size = <0x40000>; // L2, 256K
82                         interrupt-parent = <&mpic>;
83                         interrupts = <16 2>;
84                 };
86                 i2c@3000 {
87                         #address-cells = <1>;
88                         #size-cells = <0>;
89                         cell-index = <0>;
90                         compatible = "fsl-i2c";
91                         reg = <0x3000 0x100>;
92                         interrupts = <43 2>;
93                         interrupt-parent = <&mpic>;
94                         dfsrr;
96                         dtt@48 {
97                                 compatible = "national,lm75";
98                                 reg = <0x48>;
99                         };
101                         rtc@68 {
102                                 compatible = "dallas,ds1337";
103                                 reg = <0x68>;
104                         };
105                 };
107                 dma@21300 {
108                         #address-cells = <1>;
109                         #size-cells = <1>;
110                         compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
111                         reg = <0x21300 0x4>;
112                         ranges = <0x0 0x21100 0x200>;
113                         cell-index = <0>;
114                         dma-channel@0 {
115                                 compatible = "fsl,mpc8560-dma-channel",
116                                                 "fsl,eloplus-dma-channel";
117                                 reg = <0x0 0x80>;
118                                 cell-index = <0>;
119                                 interrupt-parent = <&mpic>;
120                                 interrupts = <20 2>;
121                         };
122                         dma-channel@80 {
123                                 compatible = "fsl,mpc8560-dma-channel",
124                                                 "fsl,eloplus-dma-channel";
125                                 reg = <0x80 0x80>;
126                                 cell-index = <1>;
127                                 interrupt-parent = <&mpic>;
128                                 interrupts = <21 2>;
129                         };
130                         dma-channel@100 {
131                                 compatible = "fsl,mpc8560-dma-channel",
132                                                 "fsl,eloplus-dma-channel";
133                                 reg = <0x100 0x80>;
134                                 cell-index = <2>;
135                                 interrupt-parent = <&mpic>;
136                                 interrupts = <22 2>;
137                         };
138                         dma-channel@180 {
139                                 compatible = "fsl,mpc8560-dma-channel",
140                                                 "fsl,eloplus-dma-channel";
141                                 reg = <0x180 0x80>;
142                                 cell-index = <3>;
143                                 interrupt-parent = <&mpic>;
144                                 interrupts = <23 2>;
145                         };
146                 };
148                 enet0: ethernet@24000 {
149                         #address-cells = <1>;
150                         #size-cells = <1>;
151                         cell-index = <0>;
152                         device_type = "network";
153                         model = "TSEC";
154                         compatible = "gianfar";
155                         reg = <0x24000 0x1000>;
156                         ranges = <0x0 0x24000 0x1000>;
157                         local-mac-address = [ 00 00 00 00 00 00 ];
158                         interrupts = <29 2 30 2 34 2>;
159                         interrupt-parent = <&mpic>;
160                         tbi-handle = <&tbi0>;
161                         phy-handle = <&phy2>;
163                         mdio@520 {
164                                 #address-cells = <1>;
165                                 #size-cells = <0>;
166                                 compatible = "fsl,gianfar-mdio";
167                                 reg = <0x520 0x20>;
169                                 phy1: ethernet-phy@1 {
170                                         interrupt-parent = <&mpic>;
171                                         interrupts = <8 1>;
172                                         reg = <1>;
173                                 };
174                                 phy2: ethernet-phy@2 {
175                                         interrupt-parent = <&mpic>;
176                                         interrupts = <8 1>;
177                                         reg = <2>;
178                                 };
179                                 phy3: ethernet-phy@3 {
180                                         interrupt-parent = <&mpic>;
181                                         interrupts = <8 1>;
182                                         reg = <3>;
183                                 };
184                                 tbi0: tbi-phy@11 {
185                                         reg = <0x11>;
186                                         device_type = "tbi-phy";
187                                 };
188                         };
189                 };
191                 enet1: ethernet@25000 {
192                         #address-cells = <1>;
193                         #size-cells = <1>;
194                         cell-index = <1>;
195                         device_type = "network";
196                         model = "TSEC";
197                         compatible = "gianfar";
198                         reg = <0x25000 0x1000>;
199                         ranges = <0x0 0x25000 0x1000>;
200                         local-mac-address = [ 00 00 00 00 00 00 ];
201                         interrupts = <35 2 36 2 40 2>;
202                         interrupt-parent = <&mpic>;
203                         tbi-handle = <&tbi1>;
204                         phy-handle = <&phy1>;
206                         mdio@520 {
207                                 #address-cells = <1>;
208                                 #size-cells = <0>;
209                                 compatible = "fsl,gianfar-tbi";
210                                 reg = <0x520 0x20>;
212                                 tbi1: tbi-phy@11 {
213                                         reg = <0x11>;
214                                         device_type = "tbi-phy";
215                                 };
216                         };
217                 };
219                 mpic: pic@40000 {
220                         interrupt-controller;
221                         #address-cells = <0>;
222                         #interrupt-cells = <2>;
223                         reg = <0x40000 0x40000>;
224                         device_type = "open-pic";
225                         compatible = "chrp,open-pic";
226                 };
228                 cpm@919c0 {
229                         #address-cells = <1>;
230                         #size-cells = <1>;
231                         compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
232                         reg = <0x919c0 0x30>;
233                         ranges;
235                         muram@80000 {
236                                 #address-cells = <1>;
237                                 #size-cells = <1>;
238                                 ranges = <0 0x80000 0x10000>;
240                                 data@0 {
241                                         compatible = "fsl,cpm-muram-data";
242                                         reg = <0 0x4000 0x9000 0x2000>;
243                                 };
244                         };
246                         brg@919f0 {
247                                 compatible = "fsl,mpc8560-brg",
248                                              "fsl,cpm2-brg",
249                                              "fsl,cpm-brg";
250                                 reg = <0x919f0 0x10 0x915f0 0x10>;
251                                 clock-frequency = <0>;
252                         };
254                         cpmpic: pic@90c00 {
255                                 interrupt-controller;
256                                 #address-cells = <0>;
257                                 #interrupt-cells = <2>;
258                                 interrupts = <46 2>;
259                                 interrupt-parent = <&mpic>;
260                                 reg = <0x90c00 0x80>;
261                                 compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
262                         };
264                         serial0: serial@91a00 {
265                                 device_type = "serial";
266                                 compatible = "fsl,mpc8560-scc-uart",
267                                              "fsl,cpm2-scc-uart";
268                                 reg = <0x91a00 0x20 0x88000 0x100>;
269                                 fsl,cpm-brg = <1>;
270                                 fsl,cpm-command = <0x800000>;
271                                 current-speed = <115200>;
272                                 interrupts = <40 8>;
273                                 interrupt-parent = <&cpmpic>;
274                         };
276                         serial1: serial@91a20 {
277                                 device_type = "serial";
278                                 compatible = "fsl,mpc8560-scc-uart",
279                                              "fsl,cpm2-scc-uart";
280                                 reg = <0x91a20 0x20 0x88100 0x100>;
281                                 fsl,cpm-brg = <2>;
282                                 fsl,cpm-command = <0x4a00000>;
283                                 current-speed = <115200>;
284                                 interrupts = <41 8>;
285                                 interrupt-parent = <&cpmpic>;
286                         };
288                         enet2: ethernet@91340 {
289                                 device_type = "network";
290                                 compatible = "fsl,mpc8560-fcc-enet",
291                                              "fsl,cpm2-fcc-enet";
292                                 reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
293                                 local-mac-address = [ 00 00 00 00 00 00 ];
294                                 fsl,cpm-command = <0x1a400300>;
295                                 interrupts = <34 8>;
296                                 interrupt-parent = <&cpmpic>;
297                                 phy-handle = <&phy3>;
298                         };
299                 };
300         };
302         localbus@e0005000 {
303                 compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
304                              "simple-bus";
305                 #address-cells = <2>;
306                 #size-cells = <1>;
307                 reg = <0xe0005000 0x100>;       // BRx, ORx, etc.
308                 interrupt-parent = <&mpic>;
309                 interrupts = <19 2>;
311                 ranges = <
312                         0 0x0 0xfc000000 0x04000000     // NOR FLASH bank 1
313                         1 0x0 0xf8000000 0x08000000     // NOR FLASH bank 0
314                         2 0x0 0xe3000000 0x00008000     // CAN (2 x i82527)
315                 >;
317                 flash@1,0 {
318                         #address-cells = <1>;
319                         #size-cells = <1>;
320                         compatible = "cfi-flash";
321                         reg = <1 0x0 0x8000000>;
322                         bank-width = <4>;
323                         device-width = <1>;
325                         partition@0 {
326                                 label = "kernel";
327                                 reg = <0x00000000 0x00200000>;
328                         };
329                         partition@200000 {
330                                 label = "root";
331                                 reg = <0x00200000 0x00300000>;
332                         };
333                         partition@500000 {
334                                 label = "user";
335                                 reg = <0x00500000 0x07a00000>;
336                         };
337                         partition@7f00000 {
338                                 label = "env1";
339                                 reg = <0x07f00000 0x00040000>;
340                         };
341                         partition@7f40000 {
342                                 label = "env2";
343                                 reg = <0x07f40000 0x00040000>;
344                         };
345                         partition@7f80000 {
346                                 label = "u-boot";
347                                 reg = <0x07f80000 0x00080000>;
348                                 read-only;
349                         };
350                 };
352                 /* Note: CAN support needs be enabled in U-Boot */
353                 can0@2,0 {
354                         compatible = "intel,82527"; // Bosch CC770
355                         reg = <2 0x0 0x100>;
356                         interrupts = <4 1>;
357                         interrupt-parent = <&mpic>;
358                 };
360                 can1@2,100 {
361                         compatible = "intel,82527"; // Bosch CC770
362                         reg = <2 0x100 0x100>;
363                         interrupts = <4 1>;
364                         interrupt-parent = <&mpic>;
365                 };
366         };
368         pci0: pci@e0008000 {
369                 #interrupt-cells = <1>;
370                 #size-cells = <2>;
371                 #address-cells = <3>;
372                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
373                 device_type = "pci";
374                 reg = <0xe0008000 0x1000>;
375                 clock-frequency = <66666666>;
376                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
377                 interrupt-map = <
378                                 /* IDSEL 28 */
379                                  0xe000 0 0 1 &mpic 2 1
380                                  0xe000 0 0 2 &mpic 3 1
381                                  0xe000 0 0 3 &mpic 6 1
382                                  0xe000 0 0 4 &mpic 5 1
384                                 /* IDSEL 11 */
385                                  0x5800 0 0 1 &mpic 6 1
386                                  0x5800 0 0 2 &mpic 5 1
387                                  >;
389                 interrupt-parent = <&mpic>;
390                 interrupts = <24 2>;
391                 bus-range = <0 0>;
392                 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
393                           0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
394         };